summaryrefslogtreecommitdiffstats
path: root/drivers/net/pcmcia/xirc2ps_cs.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/pcmcia/xirc2ps_cs.c')
-rw-r--r--drivers/net/pcmcia/xirc2ps_cs.c164
1 files changed, 73 insertions, 91 deletions
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index b6c3644888cd..d858b5e4c4a7 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -63,6 +63,8 @@
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -82,7 +84,6 @@
#include <linux/bitops.h>
#include <linux/mii.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -211,13 +212,6 @@ enum xirc_cmd { /* Commands */
static const char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" };
-
-#define KDBG_XIRC KERN_DEBUG "xirc2ps_cs: "
-#define KERR_XIRC KERN_ERR "xirc2ps_cs: "
-#define KWRN_XIRC KERN_WARNING "xirc2ps_cs: "
-#define KNOT_XIRC KERN_NOTICE "xirc2ps_cs: "
-#define KINF_XIRC KERN_INFO "xirc2ps_cs: "
-
/* card types */
#define XIR_UNKNOWN 0 /* unknown: not supported */
#define XIR_CE 1 /* (prodid 1) different hardware: not supported */
@@ -351,26 +345,26 @@ PrintRegisters(struct net_device *dev)
if (pc_debug > 1) {
int i, page;
- printk(KDBG_XIRC "Register common: ");
+ printk(KERN_DEBUG pr_fmt("Register common: "));
for (i = 0; i < 8; i++)
- printk(" %2.2x", GetByte(i));
- printk("\n");
+ pr_cont(" %2.2x", GetByte(i));
+ pr_cont("\n");
for (page = 0; page <= 8; page++) {
- printk(KDBG_XIRC "Register page %2x: ", page);
+ printk(KERN_DEBUG pr_fmt("Register page %2x: "), page);
SelectPage(page);
for (i = 8; i < 16; i++)
- printk(" %2.2x", GetByte(i));
- printk("\n");
+ pr_cont(" %2.2x", GetByte(i));
+ pr_cont("\n");
}
for (page=0x40 ; page <= 0x5f; page++) {
if (page == 0x43 || (page >= 0x46 && page <= 0x4f) ||
(page >= 0x51 && page <=0x5e))
continue;
- printk(KDBG_XIRC "Register page %2x: ", page);
+ printk(KERN_DEBUG pr_fmt("Register page %2x: "), page);
SelectPage(page);
for (i = 8; i < 16; i++)
- printk(" %2.2x", GetByte(i));
- printk("\n");
+ pr_cont(" %2.2x", GetByte(i));
+ pr_cont("\n");
}
}
}
@@ -609,11 +603,11 @@ set_card_type(struct pcmcia_device *link)
local->modem = 0;
local->card_type = XIR_UNKNOWN;
if (!(prodid & 0x40)) {
- printk(KNOT_XIRC "Ooops: Not a creditcard\n");
+ pr_notice("Oops: Not a creditcard\n");
return 0;
}
if (!(mediaid & 0x01)) {
- printk(KNOT_XIRC "Not an Ethernet card\n");
+ pr_notice("Not an Ethernet card\n");
return 0;
}
if (mediaid & 0x10) {
@@ -644,12 +638,11 @@ set_card_type(struct pcmcia_device *link)
}
}
if (local->card_type == XIR_CE || local->card_type == XIR_CEM) {
- printk(KNOT_XIRC "Sorry, this is an old CE card\n");
+ pr_notice("Sorry, this is an old CE card\n");
return 0;
}
if (local->card_type == XIR_UNKNOWN)
- printk(KNOT_XIRC "unknown card (mediaid=%02x prodid=%02x)\n",
- mediaid, prodid);
+ pr_notice("unknown card (mediaid=%02x prodid=%02x)\n", mediaid, prodid);
return 1;
}
@@ -678,9 +671,9 @@ xirc2ps_config_modem(struct pcmcia_device *p_dev,
if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
- p_dev->io.BasePort2 = cf->io.win[0].base;
- p_dev->io.BasePort1 = ioaddr;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[1]->start = cf->io.win[0].base;
+ p_dev->resource[0]->start = ioaddr;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
}
@@ -697,11 +690,11 @@ xirc2ps_config_check(struct pcmcia_device *p_dev,
int *pass = priv_data;
if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
- p_dev->io.BasePort2 = cf->io.win[0].base;
- p_dev->io.BasePort1 = p_dev->io.BasePort2
+ p_dev->resource[1]->start = cf->io.win[0].base;
+ p_dev->resource[0]->start = p_dev->resource[1]->start
+ (*pass ? (cf->index & 0x20 ? -24:8)
: (cf->index & 0x20 ? 8:-24));
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ if (!pcmcia_request_io(p_dev))
return 0;
}
return -ENODEV;
@@ -749,7 +742,7 @@ xirc2ps_config(struct pcmcia_device * link)
/* Is this a valid card */
if (link->has_manf_id == 0) {
- printk(KNOT_XIRC "manfid not found in CIS\n");
+ pr_notice("manfid not found in CIS\n");
goto failure;
}
@@ -771,14 +764,14 @@ xirc2ps_config(struct pcmcia_device * link)
local->manf_str = "Toshiba";
break;
default:
- printk(KNOT_XIRC "Unknown Card Manufacturer ID: 0x%04x\n",
- (unsigned)link->manf_id);
+ pr_notice("Unknown Card Manufacturer ID: 0x%04x\n",
+ (unsigned)link->manf_id);
goto failure;
}
dev_dbg(&link->dev, "found %s card\n", local->manf_str);
if (!set_card_type(link)) {
- printk(KNOT_XIRC "this card is not supported\n");
+ pr_notice("this card is not supported\n");
goto failure;
}
@@ -804,12 +797,12 @@ xirc2ps_config(struct pcmcia_device * link)
err = pcmcia_loop_tuple(link, CISTPL_FUNCE, pcmcia_get_mac_ce, dev);
if (err) {
- printk(KNOT_XIRC "node-id not found in CIS\n");
+ pr_notice("node-id not found in CIS\n");
goto failure;
}
- link->io.IOAddrLines =10;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+ link->io_lines = 10;
if (local->modem) {
int pass;
@@ -817,16 +810,16 @@ xirc2ps_config(struct pcmcia_device * link)
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status |= CCSR_AUDIO_ENA;
}
- link->io.NumPorts2 = 8;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->end = 8;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
if (local->dingo) {
/* Take the Modem IO port from the CIS and scan for a free
* Ethernet port */
- link->io.NumPorts1 = 16; /* no Mako stuff anymore */
+ link->resource[0]->end = 16; /* no Mako stuff anymore */
if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
goto port_found;
} else {
- link->io.NumPorts1 = 18;
+ link->resource[0]->end = 18;
/* We do 2 passes here: The first one uses the regular mapping and
* the second tries again, thereby considering that the 32 ports are
* mirrored every 32 bytes. Actually we use a mirrored port for
@@ -839,16 +832,16 @@ xirc2ps_config(struct pcmcia_device * link)
* try to configure as Ethernet only.
* .... */
}
- printk(KNOT_XIRC "no ports available\n");
+ pr_notice("no ports available\n");
} else {
- link->io.NumPorts1 = 16;
+ link->resource[0]->end = 16;
for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
- link->io.BasePort1 = ioaddr;
- if (!(err=pcmcia_request_io(link, &link->io)))
+ link->resource[0]->start = ioaddr;
+ if (!(err = pcmcia_request_io(link)))
goto port_found;
}
- link->io.BasePort1 = 0; /* let CS decide */
- if ((err=pcmcia_request_io(link, &link->io)))
+ link->resource[0]->start = 0; /* let CS decide */
+ if ((err = pcmcia_request_io(link)))
goto config_error;
}
port_found:
@@ -870,24 +863,21 @@ xirc2ps_config(struct pcmcia_device * link)
goto config_error;
if (local->dingo) {
- conf_reg_t reg;
win_req_t req;
- memreq_t mem;
/* Reset the modem's BAR to the correct value
* This is necessary because in the RequestConfiguration call,
* the base address of the ethernet port (BasePort1) is written
* to the BAR registers of the modem.
*/
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_IOBASE_0;
- reg.Value = link->io.BasePort2 & 0xff;
- if ((err = pcmcia_access_configuration_register(link, &reg)))
+ err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, (u8)
+ link->resource[1]->start & 0xff);
+ if (err)
goto config_error;
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_IOBASE_1;
- reg.Value = (link->io.BasePort2 >> 8) & 0xff;
- if ((err = pcmcia_access_configuration_register(link, &reg)))
+
+ err = pcmcia_write_config_byte(link, CISREG_IOBASE_1,
+ (link->resource[1]->start >> 8) & 0xff);
+ if (err)
goto config_error;
/* There is no config entry for the Ethernet part which
@@ -901,40 +891,38 @@ xirc2ps_config(struct pcmcia_device * link)
goto config_error;
local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800;
- mem.CardOffset = 0x0;
- mem.Page = 0;
- if ((err = pcmcia_map_mem_page(link, link->win, &mem)))
+ if ((err = pcmcia_map_mem_page(link, link->win, 0)))
goto config_error;
/* Setup the CCRs; there are no infos in the CIS about the Ethernet
* part.
*/
writeb(0x47, local->dingo_ccr + CISREG_COR);
- ioaddr = link->io.BasePort1;
+ ioaddr = link->resource[0]->start;
writeb(ioaddr & 0xff , local->dingo_ccr + CISREG_IOBASE_0);
writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1);
#if 0
{
u_char tmp;
- printk(KERN_INFO "ECOR:");
+ pr_info("ECOR:");
for (i=0; i < 7; i++) {
tmp = readb(local->dingo_ccr + i*2);
- printk(" %02x", tmp);
+ pr_cont(" %02x", tmp);
}
- printk("\n");
- printk(KERN_INFO "DCOR:");
+ pr_cont("\n");
+ pr_info("DCOR:");
for (i=0; i < 4; i++) {
tmp = readb(local->dingo_ccr + 0x20 + i*2);
- printk(" %02x", tmp);
+ pr_cont(" %02x", tmp);
}
- printk("\n");
- printk(KERN_INFO "SCOR:");
+ pr_cont("\n");
+ pr_info("SCOR:");
for (i=0; i < 10; i++) {
tmp = readb(local->dingo_ccr + 0x40 + i*2);
- printk(" %02x", tmp);
+ pr_cont(" %02x", tmp);
}
- printk("\n");
+ pr_cont("\n");
}
#endif
@@ -953,11 +941,11 @@ xirc2ps_config(struct pcmcia_device * link)
(local->mohawk && if_port==4))
dev->if_port = if_port;
else
- printk(KNOT_XIRC "invalid if_port requested\n");
+ pr_notice("invalid if_port requested\n");
/* we can now register the device with the net subsystem */
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
if (local->dingo)
do_reset(dev, 1); /* a kludge to make the cem56 work */
@@ -965,14 +953,14 @@ xirc2ps_config(struct pcmcia_device * link)
SET_NETDEV_DEV(dev, &link->dev);
if ((err=register_netdev(dev))) {
- printk(KNOT_XIRC "register_netdev() failed\n");
+ pr_notice("register_netdev() failed\n");
goto config_error;
}
/* give some infos about the hardware */
- printk(KERN_INFO "%s: %s: port %#3lx, irq %d, hwaddr %pM\n",
- dev->name, local->manf_str,(u_long)dev->base_addr, (int)dev->irq,
- dev->dev_addr);
+ netdev_info(dev, "%s: port %#3lx, irq %d, hwaddr %pM\n",
+ local->manf_str, (u_long)dev->base_addr, (int)dev->irq,
+ dev->dev_addr);
return 0;
@@ -1104,8 +1092,7 @@ xirc2ps_interrupt(int irq, void *dev_id)
skb = dev_alloc_skb(pktlen+3); /* 1 extra so we can use insw */
if (!skb) {
- printk(KNOT_XIRC "low memory, packet dropped (size=%u)\n",
- pktlen);
+ pr_notice("low memory, packet dropped (size=%u)\n", pktlen);
dev->stats.rx_dropped++;
} else { /* okay get the packet */
skb_reserve(skb, 2);
@@ -1274,7 +1261,7 @@ xirc_tx_timeout(struct net_device *dev)
{
local_info_t *lp = netdev_priv(dev);
dev->stats.tx_errors++;
- printk(KERN_NOTICE "%s: transmit timed out\n", dev->name);
+ netdev_notice(dev, "transmit timed out\n");
schedule_work(&lp->tx_timeout_task);
}
@@ -1441,8 +1428,7 @@ do_config(struct net_device *dev, struct ifmap *map)
local->probe_port = 0;
dev->if_port = map->port;
}
- printk(KERN_INFO "%s: switching to %s port\n",
- dev->name, if_names[dev->if_port]);
+ netdev_info(dev, "switching to %s port\n", if_names[dev->if_port]);
do_reset(dev,1); /* not the fine way :-) */
}
return 0;
@@ -1582,7 +1568,7 @@ do_reset(struct net_device *dev, int full)
{
SelectPage(0);
value = GetByte(XIRCREG_ESR); /* read the ESR */
- printk(KERN_DEBUG "%s: ESR is: %#02x\n", dev->name, value);
+ pr_debug("%s: ESR is: %#02x\n", dev->name, value);
}
#endif
@@ -1632,13 +1618,12 @@ do_reset(struct net_device *dev, int full)
if (full && local->mohawk && init_mii(dev)) {
if (dev->if_port == 4 || local->dingo || local->new_mii) {
- printk(KERN_INFO "%s: MII selected\n", dev->name);
+ netdev_info(dev, "MII selected\n");
SelectPage(2);
PutByte(XIRCREG2_MSR, GetByte(XIRCREG2_MSR) | 0x08);
msleep(20);
} else {
- printk(KERN_INFO "%s: MII detected; using 10mbs\n",
- dev->name);
+ netdev_info(dev, "MII detected; using 10mbs\n");
SelectPage(0x42);
if (dev->if_port == 2) /* enable 10Base2 */
PutByte(XIRCREG42_SWC1, 0xC0);
@@ -1683,8 +1668,8 @@ do_reset(struct net_device *dev, int full)
}
if (full)
- printk(KERN_INFO "%s: media %s, silicon revision %d\n",
- dev->name, if_names[dev->if_port], local->silicon);
+ netdev_info(dev, "media %s, silicon revision %d\n",
+ if_names[dev->if_port], local->silicon);
/* We should switch back to page 0 to avoid a bug in revision 0
* where regs with offset below 8 can't be read after an access
* to the MAC registers */
@@ -1726,8 +1711,7 @@ init_mii(struct net_device *dev)
control = mii_rd(ioaddr, 0, 0);
if (control & 0x0400) {
- printk(KERN_NOTICE "%s can't take PHY out of isolation mode\n",
- dev->name);
+ netdev_notice(dev, "can't take PHY out of isolation mode\n");
local->probe_port = 0;
return 0;
}
@@ -1745,8 +1729,7 @@ init_mii(struct net_device *dev)
}
if (!(status & 0x0020)) {
- printk(KERN_INFO "%s: autonegotiation failed;"
- " using 10mbs\n", dev->name);
+ netdev_info(dev, "autonegotiation failed; using 10mbs\n");
if (!local->new_mii) {
control = 0x0000;
mii_wr(ioaddr, 0, 0, control, 16);
@@ -1756,8 +1739,7 @@ init_mii(struct net_device *dev)
}
} else {
linkpartner = mii_rd(ioaddr, 0, 5);
- printk(KERN_INFO "%s: MII link partner: %04x\n",
- dev->name, linkpartner);
+ netdev_info(dev, "MII link partner: %04x\n", linkpartner);
if (linkpartner & 0x0080) {
dev->if_port = 4;
} else
OpenPOWER on IntegriCloud