diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/ich8lan.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 426 |
1 files changed, 196 insertions, 230 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 976336547607..dff7bff8b8e0 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -57,147 +57,6 @@ #include "e1000.h" -#define ICH_FLASH_GFPREG 0x0000 -#define ICH_FLASH_HSFSTS 0x0004 -#define ICH_FLASH_HSFCTL 0x0006 -#define ICH_FLASH_FADDR 0x0008 -#define ICH_FLASH_FDATA0 0x0010 -#define ICH_FLASH_PR0 0x0074 - -#define ICH_FLASH_READ_COMMAND_TIMEOUT 500 -#define ICH_FLASH_WRITE_COMMAND_TIMEOUT 500 -#define ICH_FLASH_ERASE_COMMAND_TIMEOUT 3000000 -#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF -#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 - -#define ICH_CYCLE_READ 0 -#define ICH_CYCLE_WRITE 2 -#define ICH_CYCLE_ERASE 3 - -#define FLASH_GFPREG_BASE_MASK 0x1FFF -#define FLASH_SECTOR_ADDR_SHIFT 12 - -#define ICH_FLASH_SEG_SIZE_256 256 -#define ICH_FLASH_SEG_SIZE_4K 4096 -#define ICH_FLASH_SEG_SIZE_8K 8192 -#define ICH_FLASH_SEG_SIZE_64K 65536 - - -#define E1000_ICH_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI Reset */ -/* FW established a valid mode */ -#define E1000_ICH_FWSM_FW_VALID 0x00008000 - -#define E1000_ICH_MNG_IAMT_MODE 0x2 - -#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \ - (ID_LED_DEF1_OFF2 << 8) | \ - (ID_LED_DEF1_ON2 << 4) | \ - (ID_LED_DEF1_DEF2)) - -#define E1000_ICH_NVM_SIG_WORD 0x13 -#define E1000_ICH_NVM_SIG_MASK 0xC000 -#define E1000_ICH_NVM_VALID_SIG_MASK 0xC0 -#define E1000_ICH_NVM_SIG_VALUE 0x80 - -#define E1000_ICH8_LAN_INIT_TIMEOUT 1500 - -#define E1000_FEXTNVM_SW_CONFIG 1 -#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* Bit redefined for ICH8M :/ */ - -#define E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK 0x0C000000 -#define E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC 0x08000000 - -#define E1000_FEXTNVM4_BEACON_DURATION_MASK 0x7 -#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7 -#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3 - -#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL - -#define E1000_ICH_RAR_ENTRIES 7 -#define E1000_PCH2_RAR_ENTRIES 5 /* RAR[0], SHRA[0-3] */ -#define E1000_PCH_LPT_RAR_ENTRIES 12 /* RAR[0], SHRA[0-10] */ - -#define PHY_PAGE_SHIFT 5 -#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \ - ((reg) & MAX_PHY_REG_ADDRESS)) -#define IGP3_KMRN_DIAG PHY_REG(770, 19) /* KMRN Diagnostic */ -#define IGP3_VR_CTRL PHY_REG(776, 18) /* Voltage Regulator Control */ - -#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 -#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300 -#define IGP3_VR_CTRL_MODE_SHUTDOWN 0x0200 - -#define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */ - -#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */ - -/* SMBus Control Phy Register */ -#define CV_SMB_CTRL PHY_REG(769, 23) -#define CV_SMB_CTRL_FORCE_SMBUS 0x0001 - -/* SMBus Address Phy Register */ -#define HV_SMB_ADDR PHY_REG(768, 26) -#define HV_SMB_ADDR_MASK 0x007F -#define HV_SMB_ADDR_PEC_EN 0x0200 -#define HV_SMB_ADDR_VALID 0x0080 -#define HV_SMB_ADDR_FREQ_MASK 0x1100 -#define HV_SMB_ADDR_FREQ_LOW_SHIFT 8 -#define HV_SMB_ADDR_FREQ_HIGH_SHIFT 12 - -/* PHY Power Management Control */ -#define HV_PM_CTRL PHY_REG(770, 17) -#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100 - -/* PHY Low Power Idle Control */ -#define I82579_LPI_CTRL PHY_REG(772, 20) -#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 -#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80 - -/* EMI Registers */ -#define I82579_EMI_ADDR 0x10 -#define I82579_EMI_DATA 0x11 -#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */ -#define I82579_MSE_THRESHOLD 0x084F /* Mean Square Error Threshold */ -#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */ -#define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */ -#define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */ -#define I217_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE supported */ - -/* Intel Rapid Start Technology Support */ -#define I217_PROXY_CTRL BM_PHY_REG(BM_WUC_PAGE, 70) -#define I217_PROXY_CTRL_AUTO_DISABLE 0x0080 -#define I217_SxCTRL PHY_REG(BM_PORT_CTRL_PAGE, 28) -#define I217_SxCTRL_ENABLE_LPI_RESET 0x1000 -#define I217_CGFREG PHY_REG(772, 29) -#define I217_CGFREG_ENABLE_MTA_RESET 0x0002 -#define I217_MEMPWR PHY_REG(772, 26) -#define I217_MEMPWR_DISABLE_SMB_RELEASE 0x0010 - -/* Strapping Option Register - RO */ -#define E1000_STRAP 0x0000C -#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000 -#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17 -#define E1000_STRAP_SMT_FREQ_MASK 0x00003000 -#define E1000_STRAP_SMT_FREQ_SHIFT 12 - -/* OEM Bits Phy Register */ -#define HV_OEM_BITS PHY_REG(768, 25) -#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */ -#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */ -#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */ - -#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */ -#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */ - -/* KMRN Mode Control */ -#define HV_KMRN_MODE_CTRL PHY_REG(769, 16) -#define HV_KMRN_MDIO_SLOW 0x0400 - -/* KMRN FIFO Control and Status */ -#define HV_KMRN_FIFO_CTRLSTA PHY_REG(770, 16) -#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK 0x7000 -#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT 12 - /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { @@ -252,7 +111,6 @@ union ich8_flash_protected_range { u32 regval; }; -static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw); static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw); static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank); @@ -264,9 +122,7 @@ static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset, u16 *data); static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, u8 size, u16 *data); -static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw); static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw); -static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw); static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw); static s32 e1000_led_on_ich8lan(struct e1000_hw *hw); static s32 e1000_led_off_ich8lan(struct e1000_hw *hw); @@ -278,7 +134,7 @@ static s32 e1000_led_off_pchlan(struct e1000_hw *hw); static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw); static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw); -static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); +static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw); static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw); static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw); @@ -330,12 +186,12 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) u16 retry_count; for (retry_count = 0; retry_count < 2; retry_count++) { - ret_val = e1e_rphy_locked(hw, PHY_ID1, &phy_reg); + ret_val = e1e_rphy_locked(hw, MII_PHYSID1, &phy_reg); if (ret_val || (phy_reg == 0xFFFF)) continue; phy_id = (u32)(phy_reg << 16); - ret_val = e1e_rphy_locked(hw, PHY_ID2, &phy_reg); + ret_val = e1e_rphy_locked(hw, MII_PHYSID2, &phy_reg); if (ret_val || (phy_reg == 0xFFFF)) { phy_id = 0; continue; @@ -378,10 +234,15 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) s32 ret_val; u16 phy_reg; + /* Gate automatic PHY configuration by hardware on managed and + * non-managed 82579 and newer adapters. + */ + e1000_gate_hw_phy_config_ich8lan(hw, true); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) { e_dbg("Failed to initialize PHY flow\n"); - return ret_val; + goto out; } /* The MAC-PHY interconnect may be in SMBus mode. If the PHY is @@ -402,13 +263,6 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) /* fall-through */ case e1000_pch2lan: - /* Gate automatic PHY configuration by hardware on - * non-managed 82579 - */ - if ((hw->mac.type == e1000_pch2lan) && - !(fwsm & E1000_ICH_FWSM_FW_VALID)) - e1000_gate_hw_phy_config_ich8lan(hw, true); - if (e1000_phy_is_accessible_pchlan(hw)) { if (hw->mac.type == e1000_pch_lpt) { /* Unforce SMBus mode in PHY */ @@ -443,6 +297,15 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC; ew32(FEXTNVM3, mac_reg); + if (hw->mac.type == e1000_pch_lpt) { + /* Toggling LANPHYPC brings the PHY out of SMBus mode + * So ensure that the MAC is also out of SMBus mode + */ + mac_reg = er32(CTRL_EXT); + mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + } + /* Toggle LANPHYPC Value bit */ mac_reg = er32(CTRL); mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE; @@ -476,6 +339,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) */ ret_val = e1000e_phy_hw_reset_generic(hw); +out: /* Ungate automatic PHY configuration on non-managed 82579 */ if ((hw->mac.type == e1000_pch2lan) && !(fwsm & E1000_ICH_FWSM_FW_VALID)) { @@ -495,7 +359,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = 0; + s32 ret_val; phy->addr = 1; phy->reset_delay_us = 100; @@ -778,68 +642,143 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) if (mac->type == e1000_ich8lan) e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true); - /* Gate automatic PHY configuration by hardware on managed - * 82579 and i217 - */ - if ((mac->type == e1000_pch2lan || mac->type == e1000_pch_lpt) && - (er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) - e1000_gate_hw_phy_config_ich8lan(hw, true); - return 0; } /** + * __e1000_access_emi_reg_locked - Read/write EMI register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: pointer to value to read/write from/to the EMI address + * @read: boolean flag to indicate read or write + * + * This helper function assumes the SW/FW/HW Semaphore is already acquired. + **/ +static s32 __e1000_access_emi_reg_locked(struct e1000_hw *hw, u16 address, + u16 *data, bool read) +{ + s32 ret_val; + + ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, address); + if (ret_val) + return ret_val; + + if (read) + ret_val = e1e_rphy_locked(hw, I82579_EMI_DATA, data); + else + ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, *data); + + return ret_val; +} + +/** + * e1000_read_emi_reg_locked - Read Extended Management Interface register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: value to be read from the EMI address + * + * Assumes the SW/FW/HW Semaphore is already acquired. + **/ +s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data) +{ + return __e1000_access_emi_reg_locked(hw, addr, data, true); +} + +/** + * e1000_write_emi_reg_locked - Write Extended Management Interface register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: value to be written to the EMI address + * + * Assumes the SW/FW/HW Semaphore is already acquired. + **/ +static s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data) +{ + return __e1000_access_emi_reg_locked(hw, addr, &data, false); +} + +/** * e1000_set_eee_pchlan - Enable/disable EEE support * @hw: pointer to the HW structure * - * Enable/disable EEE based on setting in dev_spec structure. The bits in - * the LPI Control register will remain set only if/when link is up. + * Enable/disable EEE based on setting in dev_spec structure, the duplex of + * the link and the EEE capabilities of the link partner. The LPI Control + * register bits will remain set only if/when link is up. **/ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw) { struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; - s32 ret_val = 0; - u16 phy_reg; + s32 ret_val; + u16 lpi_ctrl; if ((hw->phy.type != e1000_phy_82579) && (hw->phy.type != e1000_phy_i217)) return 0; - ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; - if (dev_spec->eee_disable) - phy_reg &= ~I82579_LPI_CTRL_ENABLE_MASK; - else - phy_reg |= I82579_LPI_CTRL_ENABLE_MASK; - - ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg); + ret_val = e1e_rphy_locked(hw, I82579_LPI_CTRL, &lpi_ctrl); if (ret_val) - return ret_val; + goto release; + + /* Clear bits that enable EEE in various speeds */ + lpi_ctrl &= ~I82579_LPI_CTRL_ENABLE_MASK; + + /* Enable EEE if not disabled by user */ + if (!dev_spec->eee_disable) { + u16 lpa, pcs_status, data; - if ((hw->phy.type == e1000_phy_i217) && !dev_spec->eee_disable) { /* Save off link partner's EEE ability */ - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, - I217_EEE_LP_ABILITY); + switch (hw->phy.type) { + case e1000_phy_82579: + lpa = I82579_EEE_LP_ABILITY; + pcs_status = I82579_EEE_PCS_STATUS; + break; + case e1000_phy_i217: + lpa = I217_EEE_LP_ABILITY; + pcs_status = I217_EEE_PCS_STATUS; + break; + default: + ret_val = -E1000_ERR_PHY; + goto release; + } + ret_val = e1000_read_emi_reg_locked(hw, lpa, + &dev_spec->eee_lp_ability); if (ret_val) goto release; - e1e_rphy_locked(hw, I82579_EMI_DATA, &dev_spec->eee_lp_ability); - /* EEE is not supported in 100Half, so ignore partner's EEE - * in 100 ability if full-duplex is not advertised. + /* Enable EEE only for speeds in which the link partner is + * EEE capable. */ - e1e_rphy_locked(hw, PHY_LP_ABILITY, &phy_reg); - if (!(phy_reg & NWAY_LPAR_100TX_FD_CAPS)) - dev_spec->eee_lp_ability &= ~I217_EEE_100_SUPPORTED; -release: - hw->phy.ops.release(hw); + if (dev_spec->eee_lp_ability & I82579_EEE_1000_SUPPORTED) + lpi_ctrl |= I82579_LPI_CTRL_1000_ENABLE; + + if (dev_spec->eee_lp_ability & I82579_EEE_100_SUPPORTED) { + e1e_rphy_locked(hw, MII_LPA, &data); + if (data & LPA_100FULL) + lpi_ctrl |= I82579_LPI_CTRL_100_ENABLE; + else + /* EEE is not supported in 100Half, so ignore + * partner's EEE in 100 ability if full-duplex + * is not advertised. + */ + dev_spec->eee_lp_ability &= + ~I82579_EEE_100_SUPPORTED; + } + + /* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */ + ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data); + if (ret_val) + goto release; } - return 0; + ret_val = e1e_wphy_locked(hw, I82579_LPI_CTRL, lpi_ctrl); +release: + hw->phy.ops.release(hw); + + return ret_val; } /** @@ -1017,7 +956,7 @@ static DEFINE_MUTEX(nvm_mutex); * * Acquires the mutex for performing NVM operations. **/ -static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw) +static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw __always_unused *hw) { mutex_lock(&nvm_mutex); @@ -1030,7 +969,7 @@ static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw) * * Releases the mutex used while performing NVM operations. **/ -static void e1000_release_nvm_ich8lan(struct e1000_hw *hw) +static void e1000_release_nvm_ich8lan(struct e1000_hw __always_unused *hw) { mutex_unlock(&nvm_mutex); } @@ -1322,7 +1261,7 @@ static s32 e1000_write_smbus_addr(struct e1000_hw *hw) u32 strap = er32(STRAP); u32 freq = (strap & E1000_STRAP_SMT_FREQ_MASK) >> E1000_STRAP_SMT_FREQ_SHIFT; - s32 ret_val = 0; + s32 ret_val; strap &= E1000_STRAP_SMBUS_ADDRESS_MASK; @@ -1558,7 +1497,7 @@ release: **/ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable) { - s32 ret_val = 0; + s32 ret_val; u32 ctrl_reg = 0; u32 ctrl_ext = 0; u32 reg = 0; @@ -1727,7 +1666,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) */ if (hw->phy.revision < 2) { e1000e_phy_sw_reset(hw); - ret_val = e1e_wphy(hw, PHY_CONTROL, 0x3140); + ret_val = e1e_wphy(hw, MII_BMCR, 0x3140); } } @@ -1757,6 +1696,11 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) if (ret_val) goto release; ret_val = e1e_wphy_locked(hw, BM_PORT_GEN_CFG, phy_data & 0x00FF); + if (ret_val) + goto release; + + /* set MSE higher to enable link to stay up when noise is high */ + ret_val = e1000_write_emi_reg_locked(hw, I82577_MSE_THRESHOLD, 0x0034); release: hw->phy.ops.release(hw); @@ -1983,22 +1927,18 @@ static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw) /* Set MDIO slow mode before any other MDIO access */ ret_val = e1000_set_mdio_slow_mode_hv(hw); + if (ret_val) + return ret_val; ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, I82579_MSE_THRESHOLD); - if (ret_val) - goto release; /* set MSE higher to enable link to stay up when noise is high */ - ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, 0x0034); - if (ret_val) - goto release; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, I82579_MSE_LINK_DOWN); + ret_val = e1000_write_emi_reg_locked(hw, I82579_MSE_THRESHOLD, 0x0034); if (ret_val) goto release; /* drop link after 5 times MSE threshold was reached */ - ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, 0x0005); + ret_val = e1000_write_emi_reg_locked(hw, I82579_MSE_LINK_DOWN, 0x0005); release: hw->phy.ops.release(hw); @@ -2172,10 +2112,9 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw) ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, - I82579_LPI_UPDATE_TIMER); - if (!ret_val) - ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, 0x1387); + ret_val = e1000_write_emi_reg_locked(hw, + I82579_LPI_UPDATE_TIMER, + 0x1387); hw->phy.ops.release(hw); } @@ -2219,7 +2158,7 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active) { - s32 ret_val = 0; + s32 ret_val; u16 oem_reg; ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg); @@ -2277,6 +2216,8 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active) /* When LPLU is enabled, we should disable SmartSpeed */ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data); + if (ret_val) + return ret_val; data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data); if (ret_val) @@ -2949,19 +2890,32 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw) { s32 ret_val; u16 data; + u16 word; + u16 valid_csum_mask; - /* Read 0x19 and check bit 6. If this bit is 0, the checksum - * needs to be fixed. This bit is an indication that the NVM - * was prepared by OEM software and did not calculate the - * checksum...a likely scenario. + /* Read NVM and check Invalid Image CSUM bit. If this bit is 0, + * the checksum needs to be fixed. This bit is an indication that + * the NVM was prepared by OEM software and did not calculate + * the checksum...a likely scenario. */ - ret_val = e1000_read_nvm(hw, 0x19, 1, &data); + switch (hw->mac.type) { + case e1000_pch_lpt: + word = NVM_COMPAT; + valid_csum_mask = NVM_COMPAT_VALID_CSUM; + break; + default: + word = NVM_FUTURE_INIT_WORD1; + valid_csum_mask = NVM_FUTURE_INIT_WORD1_VALID_CSUM; + break; + } + + ret_val = e1000_read_nvm(hw, word, 1, &data); if (ret_val) return ret_val; - if (!(data & 0x40)) { - data |= 0x40; - ret_val = e1000_write_nvm(hw, 0x19, 1, &data); + if (!(data & valid_csum_mask)) { + data |= valid_csum_mask; + ret_val = e1000_write_nvm(hw, word, 1, &data); if (ret_val) return ret_val; ret_val = e1000e_update_nvm_checksum(hw); @@ -3624,6 +3578,17 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw) if (hw->mac.type == e1000_ich8lan) reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS); ew32(RFCTL, reg); + + /* Enable ECC on Lynxpoint */ + if (hw->mac.type == e1000_pch_lpt) { + reg = er32(PBECCSTS); + reg |= E1000_PBECCSTS_ECC_ENABLE; + ew32(PBECCSTS, reg); + + reg = er32(CTRL); + reg |= E1000_CTRL_MEHE; + ew32(CTRL, reg); + } } /** @@ -3964,8 +3929,7 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw) if (ret_val) return; reg_data &= ~E1000_KMRNCTRLSTA_DIAG_NELPBK; - ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET, - reg_data); + e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET, reg_data); } /** @@ -4000,19 +3964,20 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) if (!dev_spec->eee_disable) { u16 eee_advert; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, - I217_EEE_ADVERTISEMENT); + ret_val = + e1000_read_emi_reg_locked(hw, + I217_EEE_ADVERTISEMENT, + &eee_advert); if (ret_val) goto release; - e1e_rphy_locked(hw, I82579_EMI_DATA, &eee_advert); /* Disable LPLU if both link partners support 100BaseT * EEE and 100Full is advertised on both ends of the * link. */ - if ((eee_advert & I217_EEE_100_SUPPORTED) && + if ((eee_advert & I82579_EEE_100_SUPPORTED) && (dev_spec->eee_lp_ability & - I217_EEE_100_SUPPORTED) && + I82579_EEE_100_SUPPORTED) && (hw->phy.autoneg_advertised & ADVERTISE_100_FULL)) phy_ctrl &= ~(E1000_PHY_CTRL_D0A_LPLU | E1000_PHY_CTRL_NOND0A_LPLU); @@ -4026,7 +3991,6 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) * The SMBus release must also be disabled on LCD reset. */ if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { - /* Enable proxy to reset only on power good. */ e1e_rphy_locked(hw, I217_PROXY_CTRL, &phy_reg); phy_reg |= I217_PROXY_CTRL_AUTO_DISABLE; @@ -4287,7 +4251,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) u32 bank = 0; u32 status; - e1000e_get_cfg_done(hw); + e1000e_get_cfg_done_generic(hw); /* Wait for indication from h/w that it has completed basic config */ if (hw->mac.type >= e1000_ich10lan) { @@ -4416,7 +4380,7 @@ static const struct e1000_mac_operations ich8_mac_ops = { .reset_hw = e1000_reset_hw_ich8lan, .init_hw = e1000_init_hw_ich8lan, .setup_link = e1000_setup_link_ich8lan, - .setup_physical_interface= e1000_setup_copper_link_ich8lan, + .setup_physical_interface = e1000_setup_copper_link_ich8lan, /* id_led_init dependent on mac type */ .config_collision_dist = e1000e_config_collision_dist_generic, .rar_set = e1000e_rar_set_generic, @@ -4438,7 +4402,7 @@ static const struct e1000_phy_operations ich8_phy_ops = { static const struct e1000_nvm_operations ich8_nvm_ops = { .acquire = e1000_acquire_nvm_ich8lan, - .read = e1000_read_nvm_ich8lan, + .read = e1000_read_nvm_ich8lan, .release = e1000_release_nvm_ich8lan, .reload = e1000e_reload_nvm_generic, .update = e1000_update_nvm_checksum_ich8lan, @@ -4520,6 +4484,7 @@ const struct e1000_info e1000_pch2_info = { .mac = e1000_pch2lan, .flags = FLAG_IS_ICH | FLAG_HAS_WOL + | FLAG_HAS_HW_TIMESTAMP | FLAG_HAS_CTRLEXT_ON_LOAD | FLAG_HAS_AMT | FLAG_HAS_FLASH @@ -4528,7 +4493,7 @@ const struct e1000_info e1000_pch2_info = { .flags2 = FLAG2_HAS_PHY_STATS | FLAG2_HAS_EEE, .pba = 26, - .max_hw_frame_size = DEFAULT_JUMBO, + .max_hw_frame_size = 9018, .get_variants = e1000_get_variants_ich8lan, .mac_ops = &ich8_mac_ops, .phy_ops = &ich8_phy_ops, @@ -4539,6 +4504,7 @@ const struct e1000_info e1000_pch_lpt_info = { .mac = e1000_pch_lpt, .flags = FLAG_IS_ICH | FLAG_HAS_WOL + | FLAG_HAS_HW_TIMESTAMP | FLAG_HAS_CTRLEXT_ON_LOAD | FLAG_HAS_AMT | FLAG_HAS_FLASH @@ -4547,7 +4513,7 @@ const struct e1000_info e1000_pch_lpt_info = { .flags2 = FLAG2_HAS_PHY_STATS | FLAG2_HAS_EEE, .pba = 26, - .max_hw_frame_size = DEFAULT_JUMBO, + .max_hw_frame_size = 9018, .get_variants = e1000_get_variants_ich8lan, .mac_ops = &ich8_mac_ops, .phy_ops = &ich8_phy_ops, |
