7 files changed, 50 insertions, 4 deletions

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index e68d368e20ac..7f36d3e3c98b 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1665,6 +1665,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM53125",
 		.vlans = 4096,
 		.enabled_ports = 0xff,
+		.arl_entries = 4,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 648f91b58d1e..9b6ce7c3f6c3 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -1048,6 +1048,7 @@ struct bcm_sf2_of_data {
 	u32 type;
 	const u16 *reg_offsets;
 	unsigned int core_reg_align;
+	unsigned int num_cfp_rules;
 };
 
 /* Register offsets for the SWITCH_REG_* block */
@@ -1071,6 +1072,7 @@ static const struct bcm_sf2_of_data bcm_sf2_7445_data = {
 	.type		= BCM7445_DEVICE_ID,
 	.core_reg_align	= 0,
 	.reg_offsets	= bcm_sf2_7445_reg_offsets,
+	.num_cfp_rules	= 256,
 };
 
 static const u16 bcm_sf2_7278_reg_offsets[] = {
@@ -1093,6 +1095,7 @@ static const struct bcm_sf2_of_data bcm_sf2_7278_data = {
 	.type		= BCM7278_DEVICE_ID,
 	.core_reg_align	= 1,
 	.reg_offsets	= bcm_sf2_7278_reg_offsets,
+	.num_cfp_rules	= 128,
 };
 
 static const struct of_device_id bcm_sf2_of_match[] = {
@@ -1149,6 +1152,7 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev)
 	priv->type = data->type;
 	priv->reg_offsets = data->reg_offsets;
 	priv->core_reg_align = data->core_reg_align;
+	priv->num_cfp_rules = data->num_cfp_rules;
 
 	/* Auto-detection using standard registers will not work, so
 	 * provide an indication of what kind of device we are for
diff --git a/drivers/net/dsa/bcm_sf2.h b/drivers/net/dsa/bcm_sf2.h
index 7d3030e04f11..7f9125eef3df 100644
--- a/drivers/net/dsa/bcm_sf2.h
+++ b/drivers/net/dsa/bcm_sf2.h
@@ -72,6 +72,7 @@ struct bcm_sf2_priv {
 	u32 				type;
 	const u16			*reg_offsets;
 	unsigned int			core_reg_align;
+	unsigned int			num_cfp_rules;
 
 	/* spinlock protecting access to the indirect registers */
 	spinlock_t			indir_lock;
diff --git a/drivers/net/dsa/bcm_sf2_cfp.c b/drivers/net/dsa/bcm_sf2_cfp.c
index 2fb32d67065f..8a1da7e67707 100644
--- a/drivers/net/dsa/bcm_sf2_cfp.c
+++ b/drivers/net/dsa/bcm_sf2_cfp.c
@@ -98,7 +98,7 @@ static inline void bcm_sf2_cfp_rule_addr_set(struct bcm_sf2_priv *priv,
 {
 	u32 reg;
 
-	WARN_ON(addr >= CFP_NUM_RULES);
+	WARN_ON(addr >= priv->num_cfp_rules);
 
 	reg = core_readl(priv, CORE_CFP_ACC);
 	reg &= ~(XCESS_ADDR_MASK << XCESS_ADDR_SHIFT);
@@ -109,7 +109,7 @@ static inline void bcm_sf2_cfp_rule_addr_set(struct bcm_sf2_priv *priv,
 static inline unsigned int bcm_sf2_cfp_rule_size(struct bcm_sf2_priv *priv)
 {
 	/* Entry #0 is reserved */
-	return CFP_NUM_RULES - 1;
+	return priv->num_cfp_rules - 1;
 }
 
 static int bcm_sf2_cfp_rule_set(struct dsa_switch *ds, int port,
@@ -523,7 +523,7 @@ static int bcm_sf2_cfp_rule_get_all(struct bcm_sf2_priv *priv,
 		if (!(reg & OP_STR_DONE))
 			break;
 
-	} while (index < CFP_NUM_RULES);
+	} while (index < priv->num_cfp_rules);
 
 	/* Put the TCAM size here */
 	nfc->data = bcm_sf2_cfp_rule_size(priv);
@@ -544,7 +544,7 @@ int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port,
 	case ETHTOOL_GRXCLSRLCNT:
 		/* Subtract the default, unusable rule */
 		nfc->rule_cnt = bitmap_weight(priv->cfp.used,
-					      CFP_NUM_RULES) - 1;
+					      priv->num_cfp_rules) - 1;
 		/* We support specifying rule locations */
 		nfc->data |= RX_CLS_LOC_SPECIAL;
 		break;
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 1e46418a3b74..264b281eb86b 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -625,6 +625,44 @@ static void mt7530_adjust_link(struct dsa_switch *ds, int port,
 		 * all finished.
 		 */
 		mt7623_pad_clk_setup(ds);
+	} else {
+		u16 lcl_adv = 0, rmt_adv = 0;
+		u8 flowctrl;
+		u32 mcr = PMCR_USERP_LINK | PMCR_FORCE_MODE;
+
+		switch (phydev->speed) {
+		case SPEED_1000:
+			mcr |= PMCR_FORCE_SPEED_1000;
+			break;
+		case SPEED_100:
+			mcr |= PMCR_FORCE_SPEED_100;
+			break;
+		};
+
+		if (phydev->link)
+			mcr |= PMCR_FORCE_LNK;
+
+		if (phydev->duplex) {
+			mcr |= PMCR_FORCE_FDX;
+
+			if (phydev->pause)
+				rmt_adv = LPA_PAUSE_CAP;
+			if (phydev->asym_pause)
+				rmt_adv |= LPA_PAUSE_ASYM;
+
+			if (phydev->advertising & ADVERTISED_Pause)
+				lcl_adv |= ADVERTISE_PAUSE_CAP;
+			if (phydev->advertising & ADVERTISED_Asym_Pause)
+				lcl_adv |= ADVERTISE_PAUSE_ASYM;
+
+			flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
+
+			if (flowctrl & FLOW_CTRL_TX)
+				mcr |= PMCR_TX_FC_EN;
+			if (flowctrl & FLOW_CTRL_RX)
+				mcr |= PMCR_RX_FC_EN;
+		}
+		mt7530_write(priv, MT7530_PMCR_P(port), mcr);
 	}
 }
 
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index b83d76b99802..74db9822eb40 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -151,6 +151,7 @@ enum mt7530_stp_state {
 #define  PMCR_TX_FC_EN			BIT(5)
 #define  PMCR_RX_FC_EN			BIT(4)
 #define  PMCR_FORCE_SPEED_1000		BIT(3)
+#define  PMCR_FORCE_SPEED_100		BIT(2)
 #define  PMCR_FORCE_FDX			BIT(1)
 #define  PMCR_FORCE_LNK			BIT(0)
 #define  PMCR_COMMON_LINK		(PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | \
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 53b088166c28..5bcdd33101b0 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3178,6 +3178,7 @@ static const struct mv88e6xxx_ops mv88e6390x_ops = {
 	.port_set_jumbo_size = mv88e6165_port_set_jumbo_size,
 	.port_egress_rate_limiting = mv88e6097_port_egress_rate_limiting,
 	.port_pause_limit = mv88e6390_port_pause_limit,
+	.port_set_cmode = mv88e6390x_port_set_cmode,
 	.port_disable_learn_limit = mv88e6xxx_port_disable_learn_limit,
 	.port_disable_pri_override = mv88e6xxx_port_disable_pri_override,
 	.stats_snapshot = mv88e6390_g1_stats_snapshot,