diff options
Diffstat (limited to 'drivers/mtd/nand/atmel_nand_ecc.h')
| -rw-r--r-- | drivers/mtd/nand/atmel_nand_ecc.h | 114 |
1 files changed, 113 insertions, 1 deletions
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h index 578c776e1356..8a1e9a686759 100644 --- a/drivers/mtd/nand/atmel_nand_ecc.h +++ b/drivers/mtd/nand/atmel_nand_ecc.h @@ -3,7 +3,7 @@ * Based on AT91SAM9260 datasheet revision B. * * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. + * Copyright (C) 2007 - 2012 Atmel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -36,4 +36,116 @@ #define ATMEL_ECC_NPR 0x10 /* NParity register */ #define ATMEL_ECC_NPARITY (0xffff << 0) /* NParity */ +/* PMECC Register Definitions */ +#define ATMEL_PMECC_CFG 0x000 /* Configuration Register */ +#define PMECC_CFG_BCH_ERR2 (0 << 0) +#define PMECC_CFG_BCH_ERR4 (1 << 0) +#define PMECC_CFG_BCH_ERR8 (2 << 0) +#define PMECC_CFG_BCH_ERR12 (3 << 0) +#define PMECC_CFG_BCH_ERR24 (4 << 0) + +#define PMECC_CFG_SECTOR512 (0 << 4) +#define PMECC_CFG_SECTOR1024 (1 << 4) + +#define PMECC_CFG_PAGE_1SECTOR (0 << 8) +#define PMECC_CFG_PAGE_2SECTORS (1 << 8) +#define PMECC_CFG_PAGE_4SECTORS (2 << 8) +#define PMECC_CFG_PAGE_8SECTORS (3 << 8) + +#define PMECC_CFG_READ_OP (0 << 12) +#define PMECC_CFG_WRITE_OP (1 << 12) + +#define PMECC_CFG_SPARE_ENABLE (1 << 16) +#define PMECC_CFG_SPARE_DISABLE (0 << 16) + +#define PMECC_CFG_AUTO_ENABLE (1 << 20) +#define PMECC_CFG_AUTO_DISABLE (0 << 20) + +#define ATMEL_PMECC_SAREA 0x004 /* Spare area size */ +#define ATMEL_PMECC_SADDR 0x008 /* PMECC starting address */ +#define ATMEL_PMECC_EADDR 0x00c /* PMECC ending address */ +#define ATMEL_PMECC_CLK 0x010 /* PMECC clock control */ +#define PMECC_CLK_133MHZ (2 << 0) + +#define ATMEL_PMECC_CTRL 0x014 /* PMECC control register */ +#define PMECC_CTRL_RST (1 << 0) +#define PMECC_CTRL_DATA (1 << 1) +#define PMECC_CTRL_USER (1 << 2) +#define PMECC_CTRL_ENABLE (1 << 4) +#define PMECC_CTRL_DISABLE (1 << 5) + +#define ATMEL_PMECC_SR 0x018 /* PMECC status register */ +#define PMECC_SR_BUSY (1 << 0) +#define PMECC_SR_ENABLE (1 << 4) + +#define ATMEL_PMECC_IER 0x01c /* PMECC interrupt enable */ +#define PMECC_IER_ENABLE (1 << 0) +#define ATMEL_PMECC_IDR 0x020 /* PMECC interrupt disable */ +#define PMECC_IER_DISABLE (1 << 0) +#define ATMEL_PMECC_IMR 0x024 /* PMECC interrupt mask */ +#define PMECC_IER_MASK (1 << 0) +#define ATMEL_PMECC_ISR 0x028 /* PMECC interrupt status */ +#define ATMEL_PMECC_ECCx 0x040 /* PMECC ECC x */ +#define ATMEL_PMECC_REMx 0x240 /* PMECC REM x */ + +/* PMERRLOC Register Definitions */ +#define ATMEL_PMERRLOC_ELCFG 0x000 /* Error location config */ +#define PMERRLOC_ELCFG_SECTOR_512 (0 << 0) +#define PMERRLOC_ELCFG_SECTOR_1024 (1 << 0) +#define PMERRLOC_ELCFG_NUM_ERRORS(n) ((n) << 16) + +#define ATMEL_PMERRLOC_ELPRIM 0x004 /* Error location primitive */ +#define ATMEL_PMERRLOC_ELEN 0x008 /* Error location enable */ +#define ATMEL_PMERRLOC_ELDIS 0x00c /* Error location disable */ +#define PMERRLOC_DISABLE (1 << 0) + +#define ATMEL_PMERRLOC_ELSR 0x010 /* Error location status */ +#define PMERRLOC_ELSR_BUSY (1 << 0) +#define ATMEL_PMERRLOC_ELIER 0x014 /* Error location int enable */ +#define ATMEL_PMERRLOC_ELIDR 0x018 /* Error location int disable */ +#define ATMEL_PMERRLOC_ELIMR 0x01c /* Error location int mask */ +#define ATMEL_PMERRLOC_ELISR 0x020 /* Error location int status */ +#define PMERRLOC_ERR_NUM_MASK (0x1f << 8) +#define PMERRLOC_CALC_DONE (1 << 0) +#define ATMEL_PMERRLOC_SIGMAx 0x028 /* Error location SIGMA x */ +#define ATMEL_PMERRLOC_ELx 0x08c /* Error location x */ + +/* Register access macros for PMECC */ +#define pmecc_readl_relaxed(addr, reg) \ + readl_relaxed((addr) + ATMEL_PMECC_##reg) + +#define pmecc_writel(addr, reg, value) \ + writel((value), (addr) + ATMEL_PMECC_##reg) + +#define pmecc_readb_ecc_relaxed(addr, sector, n) \ + readb_relaxed((addr) + ATMEL_PMECC_ECCx + ((sector) * 0x40) + (n)) + +#define pmecc_readl_rem_relaxed(addr, sector, n) \ + readl_relaxed((addr) + ATMEL_PMECC_REMx + ((sector) * 0x40) + ((n) * 4)) + +#define pmerrloc_readl_relaxed(addr, reg) \ + readl_relaxed((addr) + ATMEL_PMERRLOC_##reg) + +#define pmerrloc_writel(addr, reg, value) \ + writel((value), (addr) + ATMEL_PMERRLOC_##reg) + +#define pmerrloc_writel_sigma_relaxed(addr, n, value) \ + writel_relaxed((value), (addr) + ATMEL_PMERRLOC_SIGMAx + ((n) * 4)) + +#define pmerrloc_readl_sigma_relaxed(addr, n) \ + readl_relaxed((addr) + ATMEL_PMERRLOC_SIGMAx + ((n) * 4)) + +#define pmerrloc_readl_el_relaxed(addr, n) \ + readl_relaxed((addr) + ATMEL_PMERRLOC_ELx + ((n) * 4)) + +/* Galois field dimension */ +#define PMECC_GF_DIMENSION_13 13 +#define PMECC_GF_DIMENSION_14 14 + +#define PMECC_LOOKUP_TABLE_SIZE_512 0x2000 +#define PMECC_LOOKUP_TABLE_SIZE_1024 0x4000 + +/* Time out value for reading PMECC status register */ +#define PMECC_MAX_TIMEOUT_MS 100 + #endif |
