summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/sec-core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd/sec-core.c')
-rw-r--r--drivers/mfd/sec-core.c40
1 files changed, 40 insertions, 0 deletions
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index b31824c33e15..cca0f990d287 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -323,6 +323,8 @@ static int sec_pmic_probe(struct i2c_client *i2c,
if (ret)
goto err;
+ device_init_wakeup(sec_pmic->dev, sec_pmic->wakeup);
+
return ret;
err:
@@ -341,6 +343,43 @@ static int sec_pmic_remove(struct i2c_client *i2c)
return 0;
}
+static int sec_pmic_suspend(struct device *dev)
+{
+ struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+ struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
+
+ if (device_may_wakeup(dev)) {
+ enable_irq_wake(sec_pmic->irq);
+ /*
+ * PMIC IRQ must be disabled during suspend for RTC alarm
+ * to work properly.
+ * When device is woken up from suspend by RTC Alarm, an
+ * interrupt occurs before resuming I2C bus controller.
+ * The interrupt is handled by regmap_irq_thread which tries
+ * to read RTC registers. This read fails (I2C is still
+ * suspended) and RTC Alarm interrupt is disabled.
+ */
+ disable_irq(sec_pmic->irq);
+ }
+
+ return 0;
+}
+
+static int sec_pmic_resume(struct device *dev)
+{
+ struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+ struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
+
+ if (device_may_wakeup(dev)) {
+ disable_irq_wake(sec_pmic->irq);
+ enable_irq(sec_pmic->irq);
+ }
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(sec_pmic_pm_ops, sec_pmic_suspend, sec_pmic_resume);
+
static const struct i2c_device_id sec_pmic_id[] = {
{ "sec_pmic", 0 },
{ }
@@ -351,6 +390,7 @@ static struct i2c_driver sec_pmic_driver = {
.driver = {
.name = "sec_pmic",
.owner = THIS_MODULE,
+ .pm = &sec_pmic_pm_ops,
.of_match_table = of_match_ptr(sec_dt_match),
},
.probe = sec_pmic_probe,
OpenPOWER on IntegriCloud