diff options
Diffstat (limited to 'drivers/media/pci/bt8xx/bttv-cards.c')
| -rw-r--r-- | drivers/media/pci/bt8xx/bttv-cards.c | 4895 |
1 files changed, 4895 insertions, 0 deletions
diff --git a/drivers/media/pci/bt8xx/bttv-cards.c b/drivers/media/pci/bt8xx/bttv-cards.c new file mode 100644 index 000000000000..38952faaffda --- /dev/null +++ b/drivers/media/pci/bt8xx/bttv-cards.c @@ -0,0 +1,4895 @@ +/* + + bttv-cards.c + + this file has configuration informations - card-specific stuff + like the big tvcards array for the most part + + Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) + & Marcus Metzler (mocm@thp.uni-koeln.de) + (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/kmod.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/vmalloc.h> +#include <linux/firmware.h> +#include <net/checksum.h> + +#include <asm/unaligned.h> +#include <asm/io.h> + +#include "bttvp.h" +#include <media/v4l2-common.h> +#include <media/tvaudio.h> +#include "bttv-audio-hook.h" + +/* fwd decl */ +static void boot_msp34xx(struct bttv *btv, int pin); +static void hauppauge_eeprom(struct bttv *btv); +static void avermedia_eeprom(struct bttv *btv); +static void osprey_eeprom(struct bttv *btv, const u8 ee[256]); +static void modtec_eeprom(struct bttv *btv); +static void init_PXC200(struct bttv *btv); +static void init_RTV24(struct bttv *btv); + +static void rv605_muxsel(struct bttv *btv, unsigned int input); +static void eagle_muxsel(struct bttv *btv, unsigned int input); +static void xguard_muxsel(struct bttv *btv, unsigned int input); +static void ivc120_muxsel(struct bttv *btv, unsigned int input); +static void gvc1100_muxsel(struct bttv *btv, unsigned int input); + +static void PXC200_muxsel(struct bttv *btv, unsigned int input); + +static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input); +static void picolo_tetra_init(struct bttv *btv); + +static void tibetCS16_muxsel(struct bttv *btv, unsigned int input); +static void tibetCS16_init(struct bttv *btv); + +static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input); +static void kodicom4400r_init(struct bttv *btv); + +static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input); +static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input); + +static void geovision_muxsel(struct bttv *btv, unsigned int input); + +static void phytec_muxsel(struct bttv *btv, unsigned int input); + +static void gv800s_muxsel(struct bttv *btv, unsigned int input); +static void gv800s_init(struct bttv *btv); + +static void td3116_muxsel(struct bttv *btv, unsigned int input); + +static int terratec_active_radio_upgrade(struct bttv *btv); +static int tea5757_read(struct bttv *btv); +static int tea5757_write(struct bttv *btv, int value); +static void identify_by_eeprom(struct bttv *btv, + unsigned char eeprom_data[256]); +static int __devinit pvr_boot(struct bttv *btv); + +/* config variables */ +static unsigned int triton1; +static unsigned int vsfx; +static unsigned int latency = UNSET; +int no_overlay=-1; + +static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; +static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; +static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; +static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; +static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; +static unsigned int audiodev[BTTV_MAX]; +static unsigned int saa6588[BTTV_MAX]; +static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL }; +static unsigned int autoload = UNSET; +static unsigned int gpiomask = UNSET; +static unsigned int audioall = UNSET; +static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET }; + +/* insmod options */ +module_param(triton1, int, 0444); +module_param(vsfx, int, 0444); +module_param(no_overlay, int, 0444); +module_param(latency, int, 0444); +module_param(gpiomask, int, 0444); +module_param(audioall, int, 0444); +module_param(autoload, int, 0444); + +module_param_array(card, int, NULL, 0444); +module_param_array(pll, int, NULL, 0444); +module_param_array(tuner, int, NULL, 0444); +module_param_array(svhs, int, NULL, 0444); +module_param_array(remote, int, NULL, 0444); +module_param_array(audiodev, int, NULL, 0444); +module_param_array(audiomux, int, NULL, 0444); + +MODULE_PARM_DESC(triton1,"set ETBF pci config bit " + "[enable bug compatibility for triton1 + others]"); +MODULE_PARM_DESC(vsfx,"set VSFX pci config bit " + "[yet another chipset flaw workaround]"); +MODULE_PARM_DESC(latency,"pci latency timer"); +MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list"); +MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)"); +MODULE_PARM_DESC(tuner,"specify installed tuner type"); +MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore"); +MODULE_PARM_DESC(audiodev, "specify audio device:\n" + "\t\t-1 = no audio\n" + "\t\t 0 = autodetect (default)\n" + "\t\t 1 = msp3400\n" + "\t\t 2 = tda7432\n" + "\t\t 3 = tvaudio"); +MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition."); +MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)" + " [some VIA/SIS chipsets are known to have problem with overlay]"); + +/* ----------------------------------------------------------------------- */ +/* list of card IDs for bt878+ cards */ + +static struct CARD { + unsigned id; + int cardnr; + char *name; +} cards[] __devinitdata = { + { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" }, + { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" }, + { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" }, + { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" }, + { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" }, + { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" }, + { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" }, + { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" }, + { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" }, + + { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" }, + { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" }, + + { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, + { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" }, + { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" }, + { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, + { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, + { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" }, + { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" }, + { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, + { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, + + { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, + /* some cards ship with byteswapped IDs ... */ + { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, + { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, + /* this seems to happen as well ... */ + { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, + + { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" }, + { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" }, + { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" }, + + { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" }, + { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" }, + { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" }, + { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" }, + { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" }, + { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" }, + { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" }, + + { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, + { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" }, + { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, + { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" }, + { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" }, + + { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" }, + { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" }, + { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" }, + { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" }, + + { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" }, + { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" }, + /* clashes with FlyVideo + *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */ + { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" }, + { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */ + { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */ + { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */ + + { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, + { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, + { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, + { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, + { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, + + { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" }, + { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" }, + { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" }, + { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" }, + { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" }, + + { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" }, + { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" }, + { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" }, + { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" }, + + { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" }, + { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" }, + { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" }, + { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" }, + + { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" }, + { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" }, + { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" }, + { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" }, + { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" }, + { 0xa1550800, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa1550801, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa1550802, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa1550803, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" }, + { 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" }, + { 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" }, + { 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" }, + + { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" }, + { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" }, + + { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, + { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, + { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" }, + { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" }, + { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" }, + { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" }, + + { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" }, + { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" }, + + { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" }, + { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, + { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, + { 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" }, + { 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" }, + { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" }, + { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" }, + { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" }, + { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" }, + { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" }, + + { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" }, + { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" }, + + { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" }, + { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" }, + { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" }, + { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" }, + + { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" }, + + { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" }, + { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" }, + + /* likely broken, vendor id doesn't match the other magic views ... + * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */ + + /* Duplicate PCI ID, reconfigure for this board during the eeprom read. + * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */ + + { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"}, + + /* DVB cards (using pci function .1 for mpeg data xfer) */ + { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" }, + { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" }, + { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"}, + { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" }, + { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" }, + { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" }, + { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" }, + { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" }, + { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" }, + { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" }, + { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" }, + { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "}, + { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" }, + { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" }, + { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" }, + { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" }, + { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, + { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, + { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, + + { 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" }, + { 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" }, + { 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" }, + { 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" }, + { 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" }, + { 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" }, + { 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" }, + { 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" }, + { 0x3116f200, BTTV_BOARD_TVT_TD3116, "Tongwei Video Technology TD-3116" }, + { 0x02280279, BTTV_BOARD_APOSONIC_WDVR, "Aposonic W-DVR" }, + { 0, -1, NULL } +}; + +/* ----------------------------------------------------------------------- */ +/* array with description for bt848 / bt878 tv/grabber cards */ + +struct tvcard bttv_tvcards[] = { + /* ---- card 0x00 ---------------------------------- */ + [BTTV_BOARD_UNKNOWN] = { + .name = " *** UNKNOWN/GENERIC *** ", + .video_inputs = 4, + .svhs = 2, + .muxsel = MUXSEL(2, 3, 1, 0), + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MIRO] = { + .name = "MIRO PCTV", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 15, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 10, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_HAUPPAUGE] = { + .name = "Hauppauge (bt848)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 7, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_STB] = { + .name = "STB, Gateway P/N 6000699 (bt848)", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 7, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 4, 0, 2, 3 }, + .gpiomute = 1, + .no_msp34xx = 1, + .tuner_type = TUNER_PHILIPS_NTSC, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + }, + + /* ---- card 0x04 ---------------------------------- */ + [BTTV_BOARD_INTEL] = { + .name = "Intel Create and Share PCI/ Smart Video Recorder III", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = 2, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0 }, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_DIAMOND] = { + .name = "Diamond DTV2000", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 3, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = { 0, 1, 0, 1 }, + .gpiomute = 3, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_AVERMEDIA] = { + .name = "AVerMedia TVPhone", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 3, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomask = 0x0f, + .gpiomux = { 0x0c, 0x04, 0x08, 0x04 }, + /* 0x04 for some cards ?? */ + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= avermedia_tvphone_audio, + .has_remote = 1, + }, + [BTTV_BOARD_MATRIX_VISION] = { + .name = "MATRIX-Vision MV-Delta", + .video_inputs = 5, + /* .audio_inputs= 1, */ + .svhs = 3, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 0, 0), + .gpiomux = { 0 }, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x08 ---------------------------------- */ + [BTTV_BOARD_FLYVIDEO] = { + .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xc00, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0xc00, 0x800, 0x400 }, + .gpiomute = 0xc00, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_TURBOTV] = { + .name = "IMS/IXmicro TurboTV", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 3, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 1, 1, 2, 3 }, + .pll = PLL_28, + .tuner_type = TUNER_TEMIC_PAL, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_HAUPPAUGE878] = { + .name = "Hauppauge (bt878)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x0f, /* old: 7 */ + .muxsel = MUXSEL(2, 0, 1, 1), + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MIROPRO] = { + .name = "MIRO PCTV pro", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x3014f, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x20001,0x10001, 0, 0 }, + .gpiomute = 10, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x0c ---------------------------------- */ + [BTTV_BOARD_ADSTECH_TV] = { + .name = "ADS Technologies Channel Surfer TV (bt848)", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 15, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 13, 14, 11, 7 }, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_AVERMEDIA98] = { + .name = "AVerMedia TVCapture 98", + .video_inputs = 3, + /* .audio_inputs= 4, */ + .svhs = 2, + .gpiomask = 15, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 13, 14, 11, 7 }, + .msp34xx_alt = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= avermedia_tv_stereo_audio, + .no_gpioirq = 1, + }, + [BTTV_BOARD_VHX] = { + .name = "Aimslab Video Highway Xtreme (VHX)", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 7, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */ + .gpiomute = 4, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_ZOLTRIX] = { + .name = "Zoltrix TV-Max", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 15, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0, 1, 0 }, + .gpiomute = 10, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x10 ---------------------------------- */ + [BTTV_BOARD_PIXVIEWPLAYTV] = { + .name = "Prolink Pixelview PlayTV (bt878)", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x01fe00, + .muxsel = MUXSEL(2, 3, 1, 1), + /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */ + .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, + .gpiomute = 0x002000, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_WINVIEW_601] = { + .name = "Leadtek WinView 601", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x8300f8, + .muxsel = MUXSEL(2, 3, 1, 1, 0), + .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 }, + .gpiomute = 0xcfa007, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .volume_gpio = winview_volume, + .has_radio = 1, + }, + [BTTV_BOARD_AVEC_INTERCAP] = { + .name = "AVEC Intercapture", + .video_inputs = 3, + /* .audio_inputs= 2, */ + .svhs = 2, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 1, 0, 0, 0 }, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_LIFE_FLYKIT] = { + .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = NO_SVHS, + .gpiomask = 0x8dff00, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0 }, + .no_msp34xx = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x14 ---------------------------------- */ + [BTTV_BOARD_CEI_RAFFLES] = { + .name = "CEI Raffles Card", + .video_inputs = 3, + /* .audio_inputs= 3, */ + .svhs = 2, + .muxsel = MUXSEL(2, 3, 1, 1), + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_CONFERENCETV] = { + .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50", + .video_inputs = 4, + /* .audio_inputs= 2, tuner, line in */ + .svhs = 2, + .gpiomask = 0x1800, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL_I, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_PHOEBE_TVMAS] = { + .name = "Askey CPH050/ Phoebe Tv Master + FM", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xc00, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 1, 0x800, 0x400 }, + .gpiomute = 0xc00, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MODTEC_205] = { + .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = NO_SVHS, + .has_dig_in = 1, + .gpiomask = 7, + .muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */ + /* .digital_mode= DIGITAL_MODE_CAMERA, */ + .gpiomux = { 0, 0, 0, 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ALPS_TSBB5_PAL_I, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x18 ---------------------------------- */ + [BTTV_BOARD_MAGICTVIEW061] = { + .name = "Askey CPH05X/06X (bt878) [many vendors]", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xe00, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = {0x400, 0x400, 0x400, 0x400 }, + .gpiomute = 0xc00, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, + .has_radio = 1, /* not every card has radio */ + }, + [BTTV_BOARD_VOBIS_BOOSTAR] = { + .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x1f0fff, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, + .gpiomute = 0x40000, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= terratv_audio, + }, + [BTTV_BOARD_HAUPPAUG_WCAM] = { + .name = "Hauppauge WinCam newer (bt878)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 3, + .gpiomask = 7, + .muxsel = MUXSEL(2, 0, 1, 1), + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MAXI] = { + .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50", + .video_inputs = 4, + /* .audio_inputs= 2, */ + .svhs = 2, + .gpiomask = 0x1800, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_SECAM, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x1c ---------------------------------- */ + [BTTV_BOARD_TERRATV] = { + .name = "Terratec TerraTV+ Version 1.1 (bt878)", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x1f0fff, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 }, + .gpiomute = 0x40000, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= terratv_audio, + /* GPIO wiring: + External 20 pin connector (for Active Radio Upgrade board) + gpio00: i2c-sda + gpio01: i2c-scl + gpio02: om5610-data + gpio03: om5610-clk + gpio04: om5610-wre + gpio05: om5610-stereo + gpio06: rds6588-davn + gpio07: Pin 7 n.c. + gpio08: nIOW + gpio09+10: nIOR, nSEL ?? (bt878) + gpio09: nIOR (bt848) + gpio10: nSEL (bt848) + Sound Routing: + gpio16: u2-A0 (1st 4052bt) + gpio17: u2-A1 + gpio18: u2-nEN + gpio19: u4-A0 (2nd 4052) + gpio20: u4-A1 + u4-nEN - GND + Btspy: + 00000 : Cdrom (internal audio input) + 10000 : ext. Video audio input + 20000 : TV Mono + a0000 : TV Mono/2 + 1a0000 : TV Stereo + 30000 : Radio + 40000 : Mute + */ + + }, + [BTTV_BOARD_PXC200] = { + /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */ + .name = "Imagenation PXC200", + .video_inputs = 5, + /* .audio_inputs= 1, */ + .svhs = 1, /* was: 4 */ + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 0, 0), + .gpiomux = { 0 }, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .muxsel_hook = PXC200_muxsel, + + }, + [BTTV_BOARD_FLYVIDEO_98] = { + .name = "Lifeview FlyVideo 98 LR50", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x1800, /* 0x8dfe00 */ + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0x0800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_IPROTV] = { + .name = "Formac iProTV, Formac ProTV I (bt848)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 3, + .gpiomask = 1, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 1, 0, 0, 0 }, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x20 ---------------------------------- */ + [BTTV_BOARD_INTEL_C_S_PCI] = { + .name = "Intel Create and Share PCI/ Smart Video Recorder III", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = 2, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0 }, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_TERRATVALUE] = { + .name = "Terratec TerraTValue Version Bt878", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xffff00, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x500, 0, 0x300, 0x900 }, + .gpiomute = 0x900, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_WINFAST2000] = { + .name = "Leadtek WinFast 2000/ WinFast 2000 XP", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + /* TV, CVid, SVid, CVid over SVid connector */ + .muxsel = MUXSEL(2, 3, 1, 1, 0), + /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */ + .gpiomask = 0xb33000, + .gpiomux = { 0x122000,0x1000,0x0000,0x620000 }, + .gpiomute = 0x800000, + /* Audio Routing for "WinFast 2000 XP" (no tv stereo !) + gpio23 -- hef4052:nEnable (0x800000) + gpio12 -- hef4052:A1 + gpio13 -- hef4052:A0 + 0x0000: external audio + 0x1000: FM + 0x2000: TV + 0x3000: n.c. + Note: There exists another variant "Winfast 2000" with tv stereo !? + Note: eeprom only contains FF and pci subsystem id 107d:6606 + */ + .pll = PLL_28, + .has_radio = 1, + .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */ + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= winfast2000_audio, + .has_remote = 1, + }, + [BTTV_BOARD_CHRONOS_VS2] = { + .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II", + .video_inputs = 4, + /* .audio_inputs= 3, */ + .svhs = 2, + .gpiomask = 0x1800, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x24 ---------------------------------- */ + [BTTV_BOARD_TYPHOON_TVIEW] = { + .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner", + .video_inputs = 4, + /* .audio_inputs= 3, */ + .svhs = 2, + .gpiomask = 0x1800, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .has_radio = 1, + }, + [BTTV_BOARD_PXELVWPLTVPRO] = { + .name = "Prolink PixelView PlayTV pro", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xff, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, + .gpiomute = 0x29, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MAGICTVIEW063] = { + .name = "Askey CPH06X TView99", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x551e00, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = { 0x551400, 0x551200, 0, 0 }, + .gpiomute = 0x551c00, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL_I, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, + }, + [BTTV_BOARD_PINNACLE] = { + .name = "Pinnacle PCTV Studio/Rave", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x03000F, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 2, 0xd0001, 0, 0 }, + .gpiomute = 1, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x28 ---------------------------------- */ + [BTTV_BOARD_STB2] = { + .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 7, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 4, 0, 2, 3 }, + .gpiomute = 1, + .no_msp34xx = 1, + .tuner_type = TUNER_PHILIPS_NTSC, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + }, + [BTTV_BOARD_AVPHONE98] = { + .name = "AVerMedia TVPhone 98", + .video_inputs = 3, + /* .audio_inputs= 4, */ + .svhs = 2, + .gpiomask = 15, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 13, 4, 11, 7 }, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .has_radio = 1, + .audio_mode_gpio= avermedia_tvphone_audio, + }, + [BTTV_BOARD_PV951] = { + .name = "ProVideo PV951", /* pic16c54 */ + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0, 0, 0}, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL_I, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_ONAIR_TV] = { + .name = "Little OnAir TV", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xe00b, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 }, + .gpiomute = 0xff3ffc, + .no_msp34xx = 1, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x2c ---------------------------------- */ + [BTTV_BOARD_SIGMA_TVII_FM] = { + .name = "Sigma TVII-FM", + .video_inputs = 2, + /* .audio_inputs= 1, */ + .svhs = NO_SVHS, + .gpiomask = 3, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 1, 1, 0, 2 }, + .gpiomute = 3, + .no_msp34xx = 1, + .pll = PLL_NONE, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MATRIX_VISION2] = { + .name = "MATRIX-Vision MV-Delta 2", + .video_inputs = 5, + /* .audio_inputs= 1, */ + .svhs = 3, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 0, 0), + .gpiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_ZOLTRIX_GENIE] = { + .name = "Zoltrix Genie TV/FM", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xbcf03f, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 }, + .gpiomute = 0xbcb03f, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_TEMIC_4039FR5_NTSC, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_TERRATVRADIO] = { + .name = "Terratec TV/Radio+", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x70000, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, + .gpiomute = 0x40000, + .no_msp34xx = 1, + .pll = PLL_35, + .tuner_type = TUNER_PHILIPS_PAL_I, + .tuner_addr = ADDR_UNSET, + .has_radio = 1, + }, + + /* ---- card 0x30 ---------------------------------- */ + [BTTV_BOARD_DYNALINK] = { + .name = "Askey CPH03x/ Dynalink Magic TView", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 15, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = {2,0,0,0 }, + .gpiomute = 1, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_GVBCTV3PCI] = { + .name = "IODATA GV-BCTV3/PCI", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x010f00, + .muxsel = MUXSEL(2, 3, 0, 0), + .gpiomux = {0x10000, 0, 0x10000, 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ALPS_TSHC6_NTSC, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= gvbctv3pci_audio, + }, + [BTTV_BOARD_PXELVWPLTVPAK] = { + .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP", + .video_inputs = 5, + /* .audio_inputs= 1, */ + .svhs = 3, + .has_dig_in = 1, + .gpiomask = 0xAA0000, + .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */ + /* .digital_mode= DIGITAL_MODE_CAMERA, */ + .gpiomux = { 0x20000, 0, 0x80000, 0x80000 }, + .gpiomute = 0xa8000, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL_I, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, + /* GPIO wiring: (different from Rev.4C !) + GPIO17: U4.A0 (first hef4052bt) + GPIO19: U4.A1 + GPIO20: U5.A1 (second hef4052bt) + GPIO21: U4.nEN + GPIO22: BT832 Reset Line + GPIO23: A5,A0, U5,nEN + Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22 + */ + }, + [BTTV_BOARD_EAGLE] = { + .name = "Eagle Wireless Capricorn2 (bt878A)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 7, + .muxsel = MUXSEL(2, 0, 1, 1), + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, + .pll = PLL_28, + .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x34 ---------------------------------- */ + [BTTV_BOARD_PINNACLEPRO] = { + /* David Härdeman <david@2gen.com> */ + .name = "Pinnacle PCTV Studio Pro", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 3, + .gpiomask = 0x03000F, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 1, 0xd0001, 0, 0 }, + .gpiomute = 10, + /* sound path (5 sources): + MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable) + 0= ext. Audio IN + 1= from MUX2 + 2= Mono TV sound from Tuner + 3= not connected + MUX2 (mask 0x30000): + 0,2,3= from MSP34xx + 1= FM stereo Radio from Tuner */ + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_TVIEW_RDS_FM] = { + /* Claas Langbehn <claas@bigfoot.com>, + Sven Grothklags <sven@upb.de> */ + .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS", + .video_inputs = 4, + /* .audio_inputs= 3, */ + .svhs = 2, + .gpiomask = 0x1c, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0, 0x10, 8 }, + .gpiomute = 4, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .has_radio = 1, + }, + [BTTV_BOARD_LIFETEC_9415] = { + /* Tim Röstermundt <rosterm@uni-muenster.de> + in de.comp.os.unix.linux.hardware: + options bttv card=0 pll=1 radio=1 gpiomask=0x18e0 + gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff + options tuner type=5 */ + .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x18e0, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, + .gpiomute = 0x18e0, + /* For cards with tda9820/tda9821: + 0x0000: Tuner normal stereo + 0x0080: Tuner A2 SAP (second audio program = Zweikanalton) + 0x0880: Tuner A2 stereo */ + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_BESTBUY_EASYTV] = { + /* Miguel Angel Alvarez <maacruz@navegalia.com> + old Easy TV BT848 version (model CPH031) */ + .name = "Askey CPH031/ BESTBUY Easy TV", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xF, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 10, + .pll = PLL_28, + .tuner_type = TUNER_TEMIC_PAL, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x38 ---------------------------------- */ + [BTTV_BOARD_FLYVIDEO_98FM] = { + /* Gordon Heydon <gjheydon@bigfoot.com ('98) */ + .name = "Lifeview FlyVideo 98FM LR50", + .video_inputs = 4, + /* .audio_inputs= 3, */ + .svhs = 2, + .gpiomask = 0x1800, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + }, + /* This is the ultimate cheapo capture card + * just a BT848A on a small PCB! + * Steve Hosgood <steve@equiinet.com> */ + [BTTV_BOARD_GRANDTEC] = { + .name = "GrandTec 'Grand Video Capture' (Bt848)", + .video_inputs = 2, + /* .audio_inputs= 0, */ + .svhs = 1, + .gpiomask = 0, + .muxsel = MUXSEL(3, 1), + .gpiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_35, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_ASKEY_CPH060] = { + /* Daniel Herrington <daniel.herrington@home.com> */ + .name = "Askey CPH060/ Phoebe TV Master Only (No FM)", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xe00, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x400, 0x400, 0x400, 0x400 }, + .gpiomute = 0x800, + .pll = PLL_28, + .tuner_type = TUNER_TEMIC_4036FY5_NTSC, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_ASKEY_CPH03X] = { + /* Matti Mottus <mottus@physic.ut.ee> */ + .name = "Askey CPH03x TV Capturer", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x03000F, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 1, + .pll = PLL_28, + .tuner_type = TUNER_TEMIC_PAL, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, + }, + + /* ---- card 0x3c ---------------------------------- */ + [BTTV_BOARD_MM100PCTV] = { + /* Philip Blundell <philb@gnu.org> */ + .name = "Modular Technology MM100PCTV", + .video_inputs = 2, + /* .audio_inputs= 2, */ + .svhs = NO_SVHS, + .gpiomask = 11, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 2, 0, 0, 1 }, + .gpiomute = 8, + .pll = PLL_35, + .tuner_type = TUNER_TEMIC_PAL, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_GMV1] = { + /* Adrian Cox <adrian@humboldt.co.uk */ + .name = "AG Electronics GMV1", + .video_inputs = 2, + /* .audio_inputs= 0, */ + .svhs = 1, + .gpiomask = 0xF, + .muxsel = MUXSEL(2, 2), + .gpiomux = { }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_BESTBUY_EASYTV2] = { + /* Miguel Angel Alvarez <maacruz@navegalia.com> + new Easy TV BT878 version (model CPH061) + special thanks to Informatica Mieres for providing the card */ + .name = "Askey CPH061/ BESTBUY Easy TV (bt878)", + .video_inputs = 3, + /* .audio_inputs= 2, */ + .svhs = 2, + .gpiomask = 0xFF, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = { 1, 0, 4, 4 }, + .gpiomute = 9, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_ATI_TVWONDER] = { + /* Lukas Gebauer <geby@volny.cz> */ + .name = "ATI TV-Wonder", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xf03f, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = { 0xbffe, 0, 0xbfff, 0 }, + .gpiomute = 0xbffe, + .pll = PLL_28, + .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x40 ---------------------------------- */ + [BTTV_BOARD_ATI_TVWONDERVE] = { + /* Lukas Gebauer <geby@volny.cz> */ + .name = "ATI TV-Wonder VE", + .video_inputs = 2, + /* .audio_inputs= 1, */ + .svhs = NO_SVHS, + .gpiomask = 1, + .muxsel = MUXSEL(2, 3, 0, 1), + .gpiomux = { 0, 0, 1, 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_FLYVIDEO2000] = { + /* DeeJay <deejay@westel900.net (2000S) */ + .name = "Lifeview FlyVideo 2000S LR90", + .video_inputs = 3, + /* .audio_inputs= 3, */ + .svhs = 2, + .gpiomask = 0x18e0, + .muxsel = MUXSEL(2, 3, 0, 1), + /* Radio changed from 1e80 to 0x800 to make + FlyVideo2000S in .hu happy (gm)*/ + /* -dk-???: set mute=0x1800 for tda9874h daughterboard */ + .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, + .gpiomute = 0x1800, + .audio_mode_gpio= fv2000s_audio, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_TERRATVALUER] = { + .name = "Terratec TValueRadio", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0xffff00, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x500, 0x500, 0x300, 0x900 }, + .gpiomute = 0x900, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .has_radio = 1, + }, + [BTTV_BOARD_GVBCTV4PCI] = { + /* TANAKA Kei <peg00625@nifty.com> */ + .name = "IODATA GV-BCTV4/PCI", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x010f00, + .muxsel = MUXSEL(2, 3, 0, 0), + .gpiomux = {0x10000, 0, 0x10000, 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_SHARP_2U5JF5540_NTSC, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= gvbctv3pci_audio, + }, + + /* ---- card 0x44 ---------------------------------- */ + [BTTV_BOARD_VOODOOTV_FM] = { + .name = "3Dfx VoodooTV FM (Euro)", + /* try "insmod msp3400 simple=0" if you have + * sound problems with this card. */ + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = NO_SVHS, + .gpiomask = 0x4f8a00, + /* 0x100000: 1=MSP enabled (0=disable again) + * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ + .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, + .gpiomute = 0x947fff, + /* tvtuner, radio, external,internal, mute, stereo + * tuner, Composit, SVid, Composit-on-Svid-adapter */ + .muxsel = MUXSEL(2, 3, 0, 1), + .tuner_type = TUNER_MT2032, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + }, + [BTTV_BOARD_VOODOOTV_200] = { + .name = "VoodooTV 200 (USA)", + /* try "insmod msp3400 simple=0" if you have + * sound problems with this card. */ + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = NO_SVHS, + .gpiomask = 0x4f8a00, + /* 0x100000: 1=MSP enabled (0=disable again) + * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ + .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, + .gpiomute = 0x947fff, + /* tvtuner, radio, external,internal, mute, stereo + * tuner, Composit, SVid, Composit-on-Svid-adapter */ + .muxsel = MUXSEL(2, 3, 0, 1), + .tuner_type = TUNER_MT2032, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + }, + [BTTV_BOARD_AIMMS] = { + /* Philip Blundell <pb@nexus.co.uk> */ + .name = "Active Imaging AIMMS", + .video_inputs = 1, + /* .audio_inputs= 0, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .muxsel = MUXSEL(2), + .gpiomask = 0 + }, + [BTTV_BOARD_PV_BT878P_PLUS] = { + /* Tomasz Pyra <hellfire@sedez.iq.pl> */ + .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)", + .video_inputs = 3, + /* .audio_inputs= 4, */ + .svhs = 2, + .gpiomask = 15, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */ + .gpiomute = 13, + .pll = PLL_28, + .tuner_type = TUNER_LG_PAL_I_FM, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, + /* GPIO wiring: + GPIO0: U4.A0 (hef4052bt) + GPIO1: U4.A1 + GPIO2: U4.A1 (second hef4052bt) + GPIO3: U4.nEN, U5.A0, A5.nEN + GPIO8-15: vrd866b ? + */ + }, + [BTTV_BOARD_FLYVIDEO98EZ] = { + .name = "Lifeview FlyVideo 98EZ (capture only) LR51", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = 2, + /* AV1, AV2, SVHS, CVid adapter on SVHS */ + .muxsel = MUXSEL(2, 3, 1, 1), + .pll = PLL_28, + .no_msp34xx = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x48 ---------------------------------- */ + [BTTV_BOARD_PV_BT878P_9B] = { + /* Dariusz Kowalewski <darekk@automex.pl> */ + .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x3f, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x01, 0x00, 0x03, 0x03 }, + .gpiomute = 0x09, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */ + .has_radio = 1, /* Note: not all cards have radio */ + .has_remote = 1, + /* GPIO wiring: + GPIO0: A0 hef4052 + GPIO1: A1 hef4052 + GPIO3: nEN hef4052 + GPIO8-15: vrd866b + GPIO20,22,23: R30,R29,R28 + */ + }, + [BTTV_BOARD_SENSORAY311_611] = { + /* Clay Kunz <ckunz@mail.arc.nasa.gov> */ + /* you must jumper JP5 for the 311 card (PC/104+) to work */ + .name = "Sensoray 311/611", + .video_inputs = 5, + /* .audio_inputs= 0, */ + .svhs = 4, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 0, 0), + .gpiomux = { 0 }, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_RV605] = { + /* Miguel Freitas <miguel@cetuc.puc-rio.br> */ + .name = "RemoteVision MX (RV605)", + .video_inputs = 16, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0x00, + .gpiomask2 = 0x07ff, + .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), + .no_msp34xx = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .muxsel_hook = rv605_muxsel, + }, + [BTTV_BOARD_POWERCLR_MTV878] = { + .name = "Powercolor MTV878/ MTV878R/ MTV878F", + .video_inputs = 3, + /* .audio_inputs= 2, */ + .svhs = 2, + .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */ + .muxsel = MUXSEL(2, 1, 1), + .gpiomux = { 0, 1, 2, 2 }, + .gpiomute = 4, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + }, + + /* ---- card 0x4c ---------------------------------- */ + [BTTV_BOARD_WINDVR] = { + /* Masaki Suzuki <masaki@btree.org> */ + .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x140007, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, + .tuner_type = TUNER_PHILIPS_NTSC, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= windvr_audio, + }, + [BTTV_BOARD_GRANDTEC_MULTI] = { + .name = "GrandTec Multi Capture Card (Bt878)", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_KWORLD] = { + .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF", + .video_inputs = 4, + /* .audio_inputs= 3, */ + .svhs = 2, + .gpiomask = 7, + /* Tuner, SVid, SVHS, SVid to SVHS connector */ + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio! + * This card lacks external Audio In, so we mute it on Ext. & Int. + * The PCB can take a sbx1637/sbx1673, wiring unknown. + * This card lacks PCI subsystem ID, sigh. + * gpiomux =1: lower volume, 2+3: mute + * btwincap uses 0x80000/0x80003 + */ + .gpiomute = 4, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and + radio signal strength indicators work fine. */ + .has_radio = 1, + /* GPIO Info: + GPIO0,1: HEF4052 A0,A1 + GPIO2: HEF4052 nENABLE + GPIO3-7: n.c. + GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card] + GPIO14,15: ?? + GPIO16-21: n.c. + GPIO22,23: ?? + ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/ + }, + [BTTV_BOARD_DSP_TCVIDEO] = { + /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */ + .name = "DSP Design TCVIDEO", + .video_inputs = 4, + .svhs = NO_SVHS, + .muxsel = MUXSEL(2, 3, 1, 0), + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x50 ---------------------------------- */ + [BTTV_BOARD_HAUPPAUGEPVR] = { + .name = "Hauppauge WinTV PVR", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .muxsel = MUXSEL(2, 0, 1, 1), + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + + .gpiomask = 7, + .gpiomux = {7}, + }, + [BTTV_BOARD_GVBCTV5PCI] = { + .name = "IODATA GV-BCTV5/PCI", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x0f0f80, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = {0x030000, 0x010000, 0, 0 }, + .gpiomute = 0x020000, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= gvbctv5pci_audio, + .has_radio = 1, + }, + [BTTV_BOARD_OSPREY1x0] = { + .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */ + .video_inputs = 4, /* id-inputs-clock */ + /* .audio_inputs= 0, */ + .svhs = 3, + .muxsel = MUXSEL(3, 2, 0, 1), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY1x0_848] = { + .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */ + .video_inputs = 3, + /* .audio_inputs= 0, */ + .svhs = 2, + .muxsel = MUXSEL(2, 3, 1), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + + /* ---- card 0x54 ---------------------------------- */ + [BTTV_BOARD_OSPREY101_848] = { + .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */ + .video_inputs = 2, + /* .audio_inputs= 0, */ + .svhs = 1, + .muxsel = MUXSEL(3, 1), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY1x1] = { + .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */ + .video_inputs = 1, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .muxsel = MUXSEL(0), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY1x1_SVID] = { + .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */ + .video_inputs = 2, + /* .audio_inputs= 0, */ + .svhs = 1, + .muxsel = MUXSEL(0, 1), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY2xx] = { + .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */ + .video_inputs = 1, + /* .audio_inputs= 1, */ + .svhs = NO_SVHS, + .muxsel = MUXSEL(0), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + + /* ---- card 0x58 ---------------------------------- */ + [BTTV_BOARD_OSPREY2x0_SVID] = { + .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */ + .video_inputs = 2, + /* .audio_inputs= 1, */ + .svhs = 1, + .muxsel = MUXSEL(0, 1), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY2x0] = { + .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */ + .video_inputs = 2, + /* .audio_inputs= 1, */ + .svhs = 1, + .muxsel = MUXSEL(2, 3), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY500] = { + .name = "Osprey 500", /* 500 */ + .video_inputs = 2, + /* .audio_inputs= 1, */ + .svhs = 1, + .muxsel = MUXSEL(2, 3), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY540] = { + .name = "Osprey 540", /* 540 */ + .video_inputs = 4, + /* .audio_inputs= 1, */ + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + + /* ---- card 0x5C ---------------------------------- */ + [BTTV_BOARD_OSPREY2000] = { + .name = "Osprey 2000", /* 2000 */ + .video_inputs = 2, + /* .audio_inputs= 1, */ + .svhs = 1, + .muxsel = MUXSEL(2, 3), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */ + }, + [BTTV_BOARD_IDS_EAGLE] = { + /* M G Berberich <berberic@forwiss.uni-passau.de> */ + .name = "IDS Eagle", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .svhs = NO_SVHS, + .gpiomask = 0, + .muxsel = MUXSEL(2, 2, 2, 2), + .muxsel_hook = eagle_muxsel, + .no_msp34xx = 1, + .pll = PLL_28, + }, + [BTTV_BOARD_PINNACLESAT] = { + .name = "Pinnacle PCTV Sat", + .video_inputs = 2, + /* .audio_inputs= 0, */ + .svhs = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + .muxsel = MUXSEL(3, 1), + .pll = PLL_28, + .no_gpioirq = 1, + .has_dvb = 1, + }, + [BTTV_BOARD_FORMAC_PROTV] = { + .name = "Formac ProTV II (bt878)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 3, + .gpiomask = 2, + /* TV, Comp1, Composite over SVID con, SVID */ + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 2, 2, 0, 0 }, + .pll = PLL_28, + .has_radio = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + /* sound routing: + GPIO=0x00,0x01,0x03: mute (?) + 0x02: both TV and radio (tuner: FM1216/I) + The card has onboard audio connectors labeled "cdrom" and "board", + not soldered here, though unknown wiring. + Card lacks: external audio in, pci subsystem id. + */ + }, + + /* ---- card 0x60 ---------------------------------- */ + [BTTV_BOARD_MACHTV] = { + .name = "MachTV", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = NO_SVHS, + .gpiomask = 7, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 1, 2, 3}, + .gpiomute = 4, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + }, + [BTTV_BOARD_EURESYS_PICOLO] = { + .name = "Euresys Picolo", + .video_inputs = 3, + /* .audio_inputs= 0, */ + .svhs = 2, + .gpiomask = 0, + .no_msp34xx = 1, + .no_tda7432 = 1, + .muxsel = MUXSEL(2, 0, 1), + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_PV150] = { + /* Luc Van Hoeylandt <luc@e-magic.be> */ + .name = "ProVideo PV150", /* 0x4f */ + .video_inputs = 2, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3), + .gpiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_AD_TVK503] = { + /* Hiroshi Takekawa <sian@big.or.jp> */ + /* This card lacks subsystem ID */ + .name = "AD-TVK503", /* 0x63 */ + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x001e8007, + .muxsel = MUXSEL(2, 3, 1, 0), + /* Tuner, Radio, external, internal, off, on */ + .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 }, + .gpiomute = 0x0f, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_NTSC, + .tuner_addr = ADDR_UNSET, + .audio_mode_gpio= adtvk503_audio, + }, + + /* ---- card 0x64 ---------------------------------- */ + [BTTV_BOARD_HERCULES_SM_TV] = { + .name = "Hercules Smart TV Stereo", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x00, + .muxsel = MUXSEL(2, 3, 1, 1), + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + /* Notes: + - card lacks subsystem ID + - stereo variant w/ daughter board with tda9874a @0xb0 + - Audio Routing: + always from tda9874 independent of GPIO (?) + external line in: unknown + - Other chips: em78p156elp @ 0x96 (probably IR remote control) + hef4053 (instead 4052) for unknown function + */ + }, + [BTTV_BOARD_PACETV] = { + .name = "Pace TV & Radio Card", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + /* Tuner, CVid, SVid, CVid over SVid connector */ + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomask = 0, + .no_tda7432 = 1, + .tuner_type = TUNER_PHILIPS_PAL_I, + .tuner_addr = ADDR_UNSET, + .has_radio = 1, + .pll = PLL_28, + /* Bt878, Bt832, FI1246 tuner; no pci subsystem id + only internal line out: (4pin header) RGGL + Radio must be decoded by msp3410d (not routed through)*/ + /* + .digital_mode = DIGITAL_MODE_CAMERA, todo! + */ + }, + [BTTV_BOARD_IVC200] = { + /* Chris Willing <chris@vislab.usyd.edu.au> */ + .name = "IVC-200", + .video_inputs = 1, + /* .audio_inputs= 0, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .svhs = NO_SVHS, + .gpiomask = 0xdf, + .muxsel = MUXSEL(2), + .pll = PLL_28, + }, + [BTTV_BOARD_IVCE8784] = { + .name = "IVCE-8784", + .video_inputs = 1, + /* .audio_inputs= 0, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .svhs = NO_SVHS, + .gpiomask = 0xdf, + .muxsel = MUXSEL(2), + .pll = PLL_28, + }, + [BTTV_BOARD_XGUARD] = { + .name = "Grand X-Guard / Trust 814PCI", + .video_inputs = 16, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .gpiomask2 = 0xff, + .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0), + .muxsel_hook = xguard_muxsel, + .no_msp34xx = 1, + .no_tda7432 = 1, + .pll = PLL_28, + }, + + /* ---- card 0x68 ---------------------------------- */ + [BTTV_BOARD_NEBULA_DIGITV] = { + .name = "Nebula Electronics DigiTV", + .video_inputs = 1, + .svhs = NO_SVHS, + .muxsel = MUXSEL(2, 3, 1, 0), + .no_msp34xx = 1, + .no_tda7432 = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .has_dvb = 1, + .has_remote = 1, + .gpiomask = 0x1b, + .no_gpioirq = 1, + }, + [BTTV_BOARD_PV143] = { + /* Jorge Boncompte - DTI2 <jorge@dti2.net> */ + .name = "ProVideo PV143", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_VD009X1_VD011_MINIDIN] = { + /* M.Klahr@phytec.de */ + .name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = 3, + .gpiomask = 0x00, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_VD009X1_VD011_COMBI] = { + .name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = 3, + .gpiomask = 0x00, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + + /* ---- card 0x6c ---------------------------------- */ + [BTTV_BOARD_VD009_MINIDIN] = { + .name = "PHYTEC VD-009 MiniDIN (bt878)", + .video_inputs = 10, + /* .audio_inputs= 0, */ + .svhs = 9, + .gpiomask = 0x00, + .gpiomask2 = 0x03, /* used for external vodeo mux */ + .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0), + .muxsel_hook = phytec_muxsel, + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_VD009_COMBI] = { + .name = "PHYTEC VD-009 Combi (bt878)", + .video_inputs = 10, + /* .audio_inputs= 0, */ + .svhs = 9, + .gpiomask = 0x00, + .gpiomask2 = 0x03, /* used for external vodeo mux */ + .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), + .muxsel_hook = phytec_muxsel, + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_IVC100] = { + .name = "IVC-100", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .svhs = NO_SVHS, + .gpiomask = 0xdf, + .muxsel = MUXSEL(2, 3, 1, 0), + .pll = PLL_28, + }, + [BTTV_BOARD_IVC120] = { + /* IVC-120G - Alan Garfield <alan@fromorbit.com> */ + .name = "IVC-120G", + .video_inputs = 16, + /* .audio_inputs= 0, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .svhs = NO_SVHS, /* card has no svhs */ + .no_msp34xx = 1, + .no_tda7432 = 1, + .gpiomask = 0x00, + .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), + .muxsel_hook = ivc120_muxsel, + .pll = PLL_28, + }, + + /* ---- card 0x70 ---------------------------------- */ + [BTTV_BOARD_PC_HDTV] = { + .name = "pcHDTV HD-2000 TV", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .muxsel = MUXSEL(2, 3, 1, 0), + .tuner_type = TUNER_PHILIPS_FCV1236D, + .tuner_addr = ADDR_UNSET, + .has_dvb = 1, + }, + [BTTV_BOARD_TWINHAN_DST] = { + .name = "Twinhan DST + clones", + .no_msp34xx = 1, + .no_tda7432 = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_video = 1, + .has_dvb = 1, + }, + [BTTV_BOARD_WINFASTVC100] = { + .name = "Winfast VC100", + .video_inputs = 3, + /* .audio_inputs= 0, */ + .svhs = 1, + /* Vid In, SVid In, Vid over SVid in connector */ + .muxsel = MUXSEL(3, 1, 1, 3), + .no_msp34xx = 1, + .no_tda7432 = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + }, + [BTTV_BOARD_TEV560] = { + .name = "Teppro TEV-560/InterVision IV-560", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 3, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 1, 1, 1, 1 }, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .pll = PLL_35, + }, + + /* ---- card 0x74 ---------------------------------- */ + [BTTV_BOARD_SIMUS_GVC1100] = { + .name = "SIMUS GVC1100", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .muxsel = MUXSEL(2, 2, 2, 2), + .gpiomask = 0x3F, + .muxsel_hook = gvc1100_muxsel, + }, + [BTTV_BOARD_NGSTV_PLUS] = { + /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */ + .name = "NGS NGSTV+", + .video_inputs = 3, + .svhs = 2, + .gpiomask = 0x008007, + .muxsel = MUXSEL(2, 3, 0, 0), + .gpiomux = { 0, 0, 0, 0 }, + .gpiomute = 0x000003, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, + }, + [BTTV_BOARD_LMLBT4] = { + /* http://linuxmedialabs.com */ + .name = "LMLBT4", + .video_inputs = 4, /* IN1,IN2,IN3,IN4 */ + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .muxsel = MUXSEL(2, 3, 1, 0), + .no_msp34xx = 1, + .no_tda7432 = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_TEKRAM_M205] = { + /* Helmroos Harri <harri.helmroos@pp.inet.fi> */ + .name = "Tekram M205 PRO", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .svhs = 2, + .gpiomask = 0x68, + .muxsel = MUXSEL(2, 3, 1), + .gpiomux = { 0x68, 0x68, 0x61, 0x61 }, + .pll = PLL_28, + }, + + /* ---- card 0x78 ---------------------------------- */ + [BTTV_BOARD_CONTVFMI] = { + /* Javier Cendan Ares <jcendan@lycos.es> */ + /* bt878 TV + FM without subsystem ID */ + .name = "Conceptronic CONTVFMi", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x008007, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 1, 2, 2 }, + .gpiomute = 3, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, + .has_radio = 1, + }, + [BTTV_BOARD_PICOLO_TETRA_CHIP] = { + /*Eric DEBIEF <debief@telemsa.com>*/ + /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/ + /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/ + /*0x79 in bttv.h*/ + .name = "Euresys Picolo Tetra", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0, + .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/ + .no_msp34xx = 1, + .no_tda7432 = 1, + /*878A input is always MUX0, see above.*/ + .muxsel = MUXSEL(2, 2, 2, 2), + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ + .pll = PLL_28, + .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_SPIRIT_TV] = { + /* Spirit TV Tuner from http://spiritmodems.com.au */ + /* Stafford Goodsell <surge@goliath.homeunix.org> */ + .name = "Spirit TV Tuner", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x0000000f, + .muxsel = MUXSEL(2, 1, 1), + .gpiomux = { 0x02, 0x00, 0x00, 0x00 }, + .tuner_type = TUNER_TEMIC_PAL, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + }, + [BTTV_BOARD_AVDVBT_771] = { + /* Wolfram Joost <wojo@frokaschwei.de> */ + .name = "AVerMedia AVerTV DVB-T 771", + .video_inputs = 2, + .svhs = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .muxsel = MUXSEL(3, 3), + .no_msp34xx = 1, + .no_tda7432 = 1, + .pll = PLL_28, + .has_dvb = 1, + .no_gpioirq = 1, + .has_remote = 1, + }, + /* ---- card 0x7c ---------------------------------- */ + [BTTV_BOARD_AVDVBT_761] = { + /* Matt Jesson <dvb@jesson.eclipse.co.uk> */ + /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */ + .name = "AverMedia AverTV DVB-T 761", + .video_inputs = 2, + .svhs = 1, + .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */ + .no_msp34xx = 1, + .no_tda7432 = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .has_dvb = 1, + .no_gpioirq = 1, + .has_remote = 1, + }, + [BTTV_BOARD_MATRIX_VISIONSQ] = { + /* andre.schwarz@matrix-vision.de */ + .name = "MATRIX Vision Sigma-SQ", + .video_inputs = 16, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0x0, + .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3), + .muxsel_hook = sigmaSQ_muxsel, + .gpiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MATRIX_VISIONSLC] = { + /* andre.schwarz@matrix-vision.de */ + .name = "MATRIX Vision Sigma-SLC", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0x0, + .muxsel = MUXSEL(2, 2, 2, 2), + .muxsel_hook = sigmaSLC_muxsel, + .gpiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + /* BTTV_BOARD_APAC_VIEWCOMP */ + [BTTV_BOARD_APAC_VIEWCOMP] = { + /* Attila Kondoros <attila.kondoros@chello.hu> */ + /* bt878 TV + FM 0x00000000 subsystem ID */ + .name = "APAC Viewcomp 878(AMAX)", + .video_inputs = 2, + /* .audio_inputs= 1, */ + .svhs = NO_SVHS, + .gpiomask = 0xFF, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 10, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */ + .has_radio = 1, /* not every card has radio */ + }, + + /* ---- card 0x80 ---------------------------------- */ + [BTTV_BOARD_DVICO_DVBT_LITE] = { + /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */ + .name = "DViCO FusionHDTV DVB-T Lite", + .no_msp34xx = 1, + .no_tda7432 = 1, + .pll = PLL_28, + .no_video = 1, + .has_dvb = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_VGEAR_MYVCD] = { + /* Steven <photon38@pchome.com.tw> */ + .name = "V-Gear MyVCD", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x3f, + .muxsel = MUXSEL(2, 3, 1, 0), + .gpiomux = {0x31, 0x31, 0x31, 0x31 }, + .gpiomute = 0x31, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .tuner_addr = ADDR_UNSET, + .has_radio = 0, + }, + [BTTV_BOARD_SUPER_TV] = { + /* Rick C <cryptdragoon@gmail.com> */ + .name = "Super TV Tuner", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .muxsel = MUXSEL(2, 3, 1, 0), + .tuner_type = TUNER_PHILIPS_NTSC, + .tuner_addr = ADDR_UNSET, + .gpiomask = 0x008007, + .gpiomux = { 0, 0x000001,0,0 }, + .has_radio = 1, + }, + [BTTV_BOARD_TIBET_CS16] = { + /* Chris Fanning <video4linux@haydon.net> */ + .name = "Tibet Systems 'Progress DVR' CS16", + .video_inputs = 16, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), + .pll = PLL_28, + .no_msp34xx = 1, + .no_tda7432 = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .muxsel_hook = tibetCS16_muxsel, + }, + [BTTV_BOARD_KODICOM_4400R] = { + /* Bill Brack <wbrack@mmm.com.hk> */ + /* + * Note that, because of the card's wiring, the "master" + * BT878A chip (i.e. the one which controls the analog switch + * and must use this card type) is the 2nd one detected. The + * other 3 chips should use card type 0x85, whose description + * follows this one. There is a EEPROM on the card (which is + * connected to the I2C of one of those other chips), but is + * not currently handled. There is also a facility for a + * "monitor", which is also not currently implemented. + */ + .name = "Kodicom 4400R (master)", + .video_inputs = 16, + /* .audio_inputs= 0, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .svhs = NO_SVHS, + /* GPIO bits 0-9 used for analog switch: + * 00 - 03: camera selector + * 04 - 06: channel (controller) selector + * 07: data (1->on, 0->off) + * 08: strobe + * 09: reset + * bit 16 is input from sync separator for the channel + */ + .gpiomask = 0x0003ff, + .no_gpioirq = 1, + .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), + .pll = PLL_28, + .no_msp34xx = 1, + .no_tda7432 = 1, + .muxsel_hook = kodicom4400r_muxsel, + }, + [BTTV_BOARD_KODICOM_4400R_SL] = { + /* Bill Brack <wbrack@mmm.com.hk> */ + /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the + * one which controls the analog switch, and must use the card type) + * is the 2nd one detected. The other 3 chips should use this card + * type + */ + .name = "Kodicom 4400R (slave)", + .video_inputs = 16, + /* .audio_inputs= 0, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .svhs = NO_SVHS, + .gpiomask = 0x010000, + .no_gpioirq = 1, + .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), + .pll = PLL_28, + .no_msp34xx = 1, + .no_tda7432 = 1, + .muxsel_hook = kodicom4400r_muxsel, + }, + /* ---- card 0x86---------------------------------- */ + [BTTV_BOARD_ADLINK_RTV24] = { + /* Michael Henson <mhenson@clarityvi.com> */ + /* Adlink RTV24 with special unlock codes */ + .name = "Adlink RTV24", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .svhs = 2, + .muxsel = MUXSEL(2, 3, 1, 0), + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + }, + /* ---- card 0x87---------------------------------- */ + [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = { + /* Michael Krufky <mkrufky@m1k.net> */ + .name = "DViCO FusionHDTV 5 Lite", + .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */ + .tuner_addr = ADDR_UNSET, + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .muxsel = MUXSEL(2, 3, 1), + .gpiomask = 0x00e00007, + .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, + .gpiomute = 0x00c00007, + .no_msp34xx = 1, + .no_tda7432 = 1, + .has_dvb = 1, + }, + /* ---- card 0x88---------------------------------- */ + [BTTV_BOARD_ACORP_Y878F] = { + /* Mauro Carvalho Chehab <mchehab@infradead.org> */ + .name = "Acorp Y878F", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x01fe00, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, + .gpiomute = 0x002000, + .pll = PLL_28, + .tuner_type = TUNER_YMEC_TVF66T5_B_DFF, + .tuner_addr = 0xc1 >>1, + .has_radio = 1, + }, + /* ---- card 0x89 ---------------------------------- */ + [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = { + .name = "Conceptronic CTVFMi v2", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x001c0007, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 1, 2, 2 }, + .gpiomute = 3, + .pll = PLL_28, + .tuner_type = TUNER_TENA_9533_DI, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, + .has_radio = 1, + }, + /* ---- card 0x8a ---------------------------------- */ + [BTTV_BOARD_PV_BT878P_2E] = { + .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)", + .video_inputs = 5, + /* .audio_inputs= 1, */ + .svhs = 3, + .has_dig_in = 1, + .gpiomask = 0x01fe00, + .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */ + /* .digital_mode= DIGITAL_MODE_CAMERA, */ + .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 }, + .gpiomute = 0x12400, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_LG_PAL_FM, + .tuner_addr = ADDR_UNSET, + .has_remote = 1, + }, + /* ---- card 0x8b ---------------------------------- */ + [BTTV_BOARD_PV_M4900] = { + /* Sérgio Fortier <sergiofortier@yahoo.com.br> */ + .name = "Prolink PixelView PlayTV MPEG2 PV-M4900", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x3f, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, + .gpiomute = 0x29, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_YMEC_TVF_5533MF, + .tuner_addr = ADDR_UNSET, + .has_radio = 1, + .has_remote = 1, + }, + /* ---- card 0x8c ---------------------------------- */ + /* Has four Bt878 chips behind a PCI bridge, each chip has: + one external BNC composite input (mux 2) + three internal composite inputs (unknown muxes) + an 18-bit stereo A/D (CS5331A), which has: + one external stereo unblanced (RCA) audio connection + one (or 3?) internal stereo balanced (XLR) audio connection + input is selected via gpio to a 14052B mux + (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300) + gain is controlled via an X9221A chip on the I2C bus @0x28 + sample rate is controlled via gpio to an MK1413S + (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3) + There is neither a tuner nor an svideo input. */ + [BTTV_BOARD_OSPREY440] = { + .name = "Osprey 440", + .video_inputs = 4, + /* .audio_inputs= 2, */ + .svhs = NO_SVHS, + .muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */ + .gpiomask = 0x303, + .gpiomute = 0x000, /* int + 32kHz */ + .gpiomux = { 0, 0, 0x000, 0x100}, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + /* ---- card 0x8d ---------------------------------- */ + [BTTV_BOARD_ASOUND_SKYEYE] = { + .name = "Asound Skyeye PCTV", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 15, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_NTSC, + .tuner_addr = ADDR_UNSET, + }, + /* ---- card 0x8e ---------------------------------- */ + [BTTV_BOARD_SABRENT_TVFM] = { + .name = "Sabrent TV-FM (bttv version)", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x108007, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 100000, 100002, 100002, 100000 }, + .no_msp34xx = 1, + .no_tda7432 = 1, + .pll = PLL_28, + .tuner_type = TUNER_TNF_5335MF, + .tuner_addr = ADDR_UNSET, + .has_radio = 1, + }, + /* ---- card 0x8f ---------------------------------- */ + [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = { + .name = "Hauppauge ImpactVCB (bt878)", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0x0f, /* old: 7 */ + .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */ + .no_msp34xx = 1, + .no_tda7432 = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MACHTV_MAGICTV] = { + /* Julian Calaby <julian.calaby@gmail.com> + * Slightly different from original MachTV definition (0x60) + + * FIXME: RegSpy says gpiomask should be "0x001c800f", but it + * stuffs up remote chip. Bug is a pin on the jaecs is not set + * properly (methinks) causing no keyup bits being set */ + + .name = "MagicTV", /* rebranded MachTV */ + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 7, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, + .tuner_type = TUNER_TEMIC_4009FR5_PAL, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + .has_remote = 1, + }, + [BTTV_BOARD_SSAI_SECURITY] = { + .name = "SSAI Security Video Interface", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .muxsel = MUXSEL(0, 1, 2, 3), + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_SSAI_ULTRASOUND] = { + .name = "SSAI Ultrasound Video Interface", + .video_inputs = 2, + /* .audio_inputs= 0, */ + .svhs = 1, + .muxsel = MUXSEL(2, 0, 1, 3), + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + /* ---- card 0x94---------------------------------- */ + [BTTV_BOARD_DVICO_FUSIONHDTV_2] = { + .name = "DViCO FusionHDTV 2", + .tuner_type = TUNER_PHILIPS_FCV1236D, + .tuner_addr = ADDR_UNSET, + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .muxsel = MUXSEL(2, 3, 1), + .gpiomask = 0x00e00007, + .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, + .gpiomute = 0x00c00007, + .no_msp34xx = 1, + .no_tda7432 = 1, + }, + /* ---- card 0x95---------------------------------- */ + [BTTV_BOARD_TYPHOON_TVTUNERPCI] = { + .name = "Typhoon TV-Tuner PCI (50684)", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x3014f, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0x20001,0x10001, 0, 0 }, + .gpiomute = 10, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL_I, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_GEOVISION_GV600] = { + /* emhn@usb.ve */ + .name = "Geovision GV-600", + .video_inputs = 16, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0x0, + .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), + .muxsel_hook = geovision_muxsel, + .gpiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_KOZUMI_KTV_01C] = { + /* Mauro Lacy <mauro@lacy.com.ar> + * Based on MagicTV and Conceptronic CONTVFMi */ + + .name = "Kozumi KTV-01C", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + .gpiomask = 0x008007, + .muxsel = MUXSEL(2, 3, 1, 1), + .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */ + .gpiomute = 3, /* CONTVFMi */ + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */ + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + .has_remote = 1, + }, + [BTTV_BOARD_ENLTV_FM_2] = { + /* Encore TV Tuner Pro ENL TV-FM-2 + Mauro Carvalho Chehab <mchehab@infradead.org */ + .name = "Encore ENL TV-FM-2", + .video_inputs = 3, + /* .audio_inputs= 1, */ + .svhs = 2, + /* bit 6 -> IR disabled + bit 18/17 = 00 -> mute + 01 -> enable external audio input + 10 -> internal audio input (mono?) + 11 -> internal audio input + */ + .gpiomask = 0x060040, + .muxsel = MUXSEL(2, 3, 3), + .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 }, + .gpiomute = 0, + .tuner_type = TUNER_TCL_MF02GIP_5N, + .tuner_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + .has_remote = 1, + }, + [BTTV_BOARD_VD012] = { + /* D.Heer@Phytec.de */ + .name = "PHYTEC VD-012 (bt878)", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0x00, + .muxsel = MUXSEL(0, 2, 3, 1), + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_VD012_X1] = { + /* D.Heer@Phytec.de */ + .name = "PHYTEC VD-012-X1 (bt878)", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = 3, + .gpiomask = 0x00, + .muxsel = MUXSEL(2, 3, 1), + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_VD012_X2] = { + /* D.Heer@Phytec.de */ + .name = "PHYTEC VD-012-X2 (bt878)", + .video_inputs = 4, + /* .audio_inputs= 0, */ + .svhs = 3, + .gpiomask = 0x00, + .muxsel = MUXSEL(3, 2, 1), + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_GEOVISION_GV800S] = { + /* Bruno Christo <bchristo@inf.ufsm.br> + * + * GeoVision GV-800(S) has 4 Conexant Fusion 878A: + * 1 audio input per BT878A = 4 audio inputs + * 4 video inputs per BT878A = 16 video inputs + * This is the first BT878A chip of the GV-800(S). It's the + * "master" chip and it controls the video inputs through an + * analog multiplexer (a CD22M3494) via some GPIO pins. The + * slaves should use card type 0x9e (following this one). + * There is a EEPROM on the card which is currently not handled. + * The audio input is not working yet. + */ + .name = "Geovision GV-800(S) (master)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .svhs = NO_SVHS, + .gpiomask = 0xf107f, + .no_gpioirq = 1, + .muxsel = MUXSEL(2, 2, 2, 2), + .pll = PLL_28, + .no_msp34xx = 1, + .no_tda7432 = 1, + .muxsel_hook = gv800s_muxsel, + }, + [BTTV_BOARD_GEOVISION_GV800S_SL] = { + /* Bruno Christo <bchristo@inf.ufsm.br> + * + * GeoVision GV-800(S) has 4 Conexant Fusion 878A: + * 1 audio input per BT878A = 4 audio inputs + * 4 video inputs per BT878A = 16 video inputs + * The 3 other BT878A chips are "slave" chips of the GV-800(S) + * and should use this card type. + * The audio input is not working yet. + */ + .name = "Geovision GV-800(S) (slave)", + .video_inputs = 4, + /* .audio_inputs= 1, */ + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .svhs = NO_SVHS, + .gpiomask = 0x00, + .no_gpioirq = 1, + .muxsel = MUXSEL(2, 2, 2, 2), + .pll = PLL_28, + .no_msp34xx = 1, + .no_tda7432 = 1, + .muxsel_hook = gv800s_muxsel, + }, + [BTTV_BOARD_PV183] = { + .name = "ProVideo PV183", /* 0x9f */ + .video_inputs = 2, + /* .audio_inputs= 0, */ + .svhs = NO_SVHS, + .gpiomask = 0, + .muxsel = MUXSEL(2, 3), + .gpiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + }, + [BTTV_BOARD_TVT_TD3116] = { + .name = "Tongwei Video Technology TD-3116", + .video_inputs = 16, + .gpiomask = 0xc00ff, + .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), + .muxsel_hook = td3116_muxsel, + .svhs = NO_SVHS, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + }, + [BTTV_BOARD_APOSONIC_WDVR] = { + .name = "Aposonic W-DVR", + .video_inputs = 4, + .svhs = NO_SVHS, + .muxsel = MUXSEL(2, 3, 1, 0), + .tuner_type = TUNER_ABSENT, + }, + +}; + +static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards); + +/* ----------------------------------------------------------------------- */ + +static unsigned char eeprom_data[256]; + +/* + * identify card + */ +void __devinit bttv_idcard(struct bttv *btv) +{ + unsigned int gpiobits; + int i,type; + + /* read PCI subsystem ID */ + btv->cardid = btv->c.pci->subsystem_device << 16; + btv->cardid |= btv->c.pci->subsystem_vendor; + + if (0 != btv->cardid && 0xffffffff != btv->cardid) { + /* look for the card */ + for (type = -1, i = 0; cards[i].id != 0; i++) + if (cards[i].id == btv->cardid) + type = i; + + if (type != -1) { + /* found it */ + pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n", + btv->c.nr, cards[type].name, cards[type].cardnr, + btv->cardid & 0xffff, + (btv->cardid >> 16) & 0xffff); + btv->c.type = cards[type].cardnr; + } else { + /* 404 */ + pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n", + btv->c.nr, btv->cardid & 0xffff, + (btv->cardid >> 16) & 0xffff); + pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n"); + } + } + + /* let the user override the autodetected type */ + if (card[btv->c.nr] < bttv_num_tvcards) + btv->c.type=card[btv->c.nr]; + + /* print which card config we are using */ + pr_info("%d: using: %s [card=%d,%s]\n", + btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type, + card[btv->c.nr] < bttv_num_tvcards + ? "insmod option" : "autodetected"); + + /* overwrite gpio stuff ?? */ + if (UNSET == audioall && UNSET == audiomux[0]) + return; + + if (UNSET != audiomux[0]) { + gpiobits = 0; + for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { + bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i]; + gpiobits |= audiomux[i]; + } + } else { + gpiobits = audioall; + for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { + bttv_tvcards[btv->c.type].gpiomux[i] = audioall; + } + } + bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits; + pr_info("%d: gpio config override: mask=0x%x, mux=", + btv->c.nr, bttv_tvcards[btv->c.type].gpiomask); + for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { + pr_cont("%s0x%x", + i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]); + } + pr_cont("\n"); +} + +/* + * (most) board specific initialisations goes here + */ + +/* Some Modular Technology cards have an eeprom, but no subsystem ID */ +static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256]) +{ + int type = -1; + + if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13)) + type = BTTV_BOARD_MODTEC_205; + else if (0 == strncmp(eeprom_data+20,"Picolo",7)) + type = BTTV_BOARD_EURESYS_PICOLO; + else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0) + type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */ + + if (-1 != type) { + btv->c.type = type; + pr_info("%d: detected by eeprom: %s [card=%d]\n", + btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type); + } +} + +static void flyvideo_gpio(struct bttv *btv) +{ + int gpio, has_remote, has_radio, is_capture_only; + int is_lr90, has_tda9820_tda9821; + int tuner_type = UNSET, ttype; + + gpio_inout(0xffffff, 0); + udelay(8); /* without this we would see the 0x1800 mask */ + gpio = gpio_read(); + /* FIXME: must restore OUR_EN ??? */ + + /* all cards provide GPIO info, some have an additional eeprom + * LR50: GPIO coding can be found lower right CP1 .. CP9 + * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1. + * GPIO14-12: n.c. + * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878) + + * lowest 3 bytes are remote control codes (no handshake needed) + * xxxFFF: No remote control chip soldered + * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered + * Note: Some bits are Audio_Mask ! + */ + ttype = (gpio & 0x0f0000) >> 16; + switch (ttype) { + case 0x0: + tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */ + break; + case 0x2: + tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */ + break; + case 0x4: + tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */ + break; + case 0x6: + tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */ + break; + case 0xC: + tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */ + break; + default: + pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr); + break; + } + + has_remote = gpio & 0x800000; + has_radio = gpio & 0x400000; + /* unknown 0x200000; + * unknown2 0x100000; */ + is_capture_only = !(gpio & 0x008000); /* GPIO15 */ + has_tda9820_tda9821 = !(gpio & 0x004000); + is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */ + /* + * gpio & 0x001000 output bit for audio routing */ + + if (is_capture_only) + tuner_type = TUNER_ABSENT; /* No tuner present */ + + pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n", + btv->c.nr, has_radio ? "yes" : "no", + has_remote ? "yes" : "no", tuner_type, gpio); + pr_info("%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n", + btv->c.nr, is_lr90 ? "yes" : "no", + has_tda9820_tda9821 ? "yes" : "no", + is_capture_only ? "yes" : "no"); + + if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */ + btv->tuner_type = tuner_type; + btv->has_radio = has_radio; + + /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80 + * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00 + * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */ + if (has_tda9820_tda9821) + btv->audio_mode_gpio = lt9415_audio; + /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */ +} + +static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1, + 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 }; +static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1, + 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 }; + +static void miro_pinnacle_gpio(struct bttv *btv) +{ + int id,msp,gpio; + char *info; + + gpio_inout(0xffffff, 0); + gpio = gpio_read(); + id = ((gpio>>10) & 63) -1; + msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx"); + if (id < 32) { + btv->tuner_type = miro_tunermap[id]; + if (0 == (gpio & 0x20)) { + btv->has_radio = 1; + if (!miro_fmtuner[id]) { + btv->has_matchbox = 1; + btv->mbox_we = (1<<6); + btv->mbox_most = (1<<7); + btv->mbox_clk = (1<<8); + btv->mbox_data = (1<<9); + btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9); + } + } else { + btv->has_radio = 0; + } + if (-1 != msp) { + if (btv->c.type == BTTV_BOARD_MIRO) + btv->c.type = BTTV_BOARD_MIROPRO; + if (btv->c.type == BTTV_BOARD_PINNACLE) + btv->c.type = BTTV_BOARD_PINNACLEPRO; + } + pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n", + btv->c.nr, id+1, btv->tuner_type, + !btv->has_radio ? "no" : + (btv->has_matchbox ? "matchbox" : "fmtuner"), + (-1 == msp) ? "no" : "yes"); + } else { + /* new cards with microtune tuner */ + id = 63 - id; + btv->has_radio = 0; + switch (id) { + case 1: + info = "PAL / mono"; + btv->tda9887_conf = TDA9887_INTERCARRIER; + break; + case 2: + info = "PAL+SECAM / stereo"; + btv->has_radio = 1; + btv->tda9887_conf = TDA9887_QSS; + break; + case 3: + info = "NTSC / stereo"; + btv->has_radio = 1; + btv->tda9887_conf = TDA9887_QSS; + break; + case 4: + info = "PAL+SECAM / mono"; + btv->tda9887_conf = TDA9887_QSS; + break; + case 5: + info = "NTSC / mono"; + btv->tda9887_conf = TDA9887_INTERCARRIER; + break; + case 6: + info = "NTSC / stereo"; + btv->tda9887_conf = TDA9887_INTERCARRIER; + break; + case 7: + info = "PAL / stereo"; + btv->tda9887_conf = TDA9887_INTERCARRIER; + break; + default: + info = "oops: unknown card"; + break; + } + if (-1 != msp) + btv->c.type = BTTV_BOARD_PINNACLEPRO; + pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n", + btv->c.nr, id, info, btv->has_radio ? "yes" : "no"); + btv->tuner_type = TUNER_MT2032; + } +} + +/* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */ +#define LM1882_SYNC_DRIVE 0x200000L + +static void init_ids_eagle(struct bttv *btv) +{ + gpio_inout(0xffffff,0xFFFF37); + gpio_write(0x200020); + + /* flash strobe inverter ?! */ + gpio_write(0x200024); + + /* switch sync drive off */ + gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); + + /* set BT848 muxel to 2 */ + btaor((2)<<5, ~(2<<5), BT848_IFORM); +} + +/* Muxsel helper for the IDS Eagle. + * the eagles does not use the standard muxsel-bits but + * has its own multiplexer */ +static void eagle_muxsel(struct bttv *btv, unsigned int input) +{ + gpio_bits(3, input & 3); + + /* composite */ + /* set chroma ADC to sleep */ + btor(BT848_ADC_C_SLEEP, BT848_ADC); + /* set to composite video */ + btand(~BT848_CONTROL_COMP, BT848_E_CONTROL); + btand(~BT848_CONTROL_COMP, BT848_O_CONTROL); + + /* switch sync drive off */ + gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); +} + +static void gvc1100_muxsel(struct bttv *btv, unsigned int input) +{ + static const int masks[] = {0x30, 0x01, 0x12, 0x23}; + gpio_write(masks[input%4]); +} + +/* LMLBT4x initialization - to allow access to GPIO bits for sensors input and + alarms output + + GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | + assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | | + + IN - sensor inputs, INx - sensor inputs and TI XORed together + O1,O2,O3 - alarm outputs (relays) + + OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0 + +*/ + +static void init_lmlbt4x(struct bttv *btv) +{ + pr_debug("LMLBT4x init\n"); + btwrite(0x000000, BT848_GPIO_REG_INP); + gpio_inout(0xffffff, 0x0006C0); + gpio_write(0x000000); +} + +static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input) +{ + unsigned int inmux = input % 8; + gpio_inout( 0xf, 0xf ); + gpio_bits( 0xf, inmux ); +} + +static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input) +{ + unsigned int inmux = input % 4; + gpio_inout( 3<<9, 3<<9 ); + gpio_bits( 3<<9, inmux<<9 ); +} + +static void geovision_muxsel(struct bttv *btv, unsigned int input) +{ + unsigned int inmux = input % 16; + gpio_inout(0xf, 0xf); + gpio_bits(0xf, inmux); +} + +/* + * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878. + * The first 74HC4051 has the lower 8 inputs, the second one the higher 8. + * The muxes are controlled via a 74HC373 latch which is connected to + * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch. + * Q0 of the latch is connected to the Enable (~E) input of the first + * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051. + * Q4 - Q7 are connected to the second 74HC4051 in the same way. + */ + +static void td3116_latch_value(struct bttv *btv, u32 value) +{ + gpio_bits((1<<18) | 0xff, value); + gpio_bits((1<<18) | 0xff, (1<<18) | value); + udelay(1); + gpio_bits((1<<18) | 0xff, value); +} + +static void td3116_muxsel(struct bttv *btv, unsigned int input) +{ + u32 value; + u32 highbit; + + highbit = (input & 0x8) >> 3 ; + + /* Disable outputs and set value in the mux */ + value = 0x11; /* Disable outputs */ + value |= ((input & 0x7) << 1) << (4 * highbit); + td3116_latch_value(btv, value); + + /* Enable the correct output */ + value &= ~0x11; + value |= ((highbit ^ 0x1) << 4) | highbit; + td3116_latch_value(btv, value); +} + +/* ----------------------------------------------------------------------- */ + +static void bttv_reset_audio(struct bttv *btv) +{ + /* + * BT878A has a audio-reset register. + * 1. This register is an audio reset function but it is in + * function-0 (video capture) address space. + * 2. It is enough to do this once per power-up of the card. + * 3. There is a typo in the Conexant doc -- it is not at + * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!). + * --//Shrikumar 030609 + */ + if (btv->id != 878) + return; + + if (bttv_debug) + pr_debug("%d: BT878A ARESET\n", btv->c.nr); + btwrite((1<<7), 0x058); + udelay(10); + btwrite( 0, 0x058); +} + +/* initialization part one -- before registering i2c bus */ +void __devinit bttv_init_card1(struct bttv *btv) +{ + switch (btv->c.type) { + case BTTV_BOARD_HAUPPAUGE: + case BTTV_BOARD_HAUPPAUGE878: + boot_msp34xx(btv,5); + break; + case BTTV_BOARD_VOODOOTV_200: + case BTTV_BOARD_VOODOOTV_FM: + boot_msp34xx(btv,20); + break; + case BTTV_BOARD_AVERMEDIA98: + boot_msp34xx(btv,11); + break; + case BTTV_BOARD_HAUPPAUGEPVR: + pvr_boot(btv); + break; + case BTTV_BOARD_TWINHAN_DST: + case BTTV_BOARD_AVDVBT_771: + case BTTV_BOARD_PINNACLESAT: + btv->use_i2c_hw = 1; + break; + case BTTV_BOARD_ADLINK_RTV24: + init_RTV24( btv ); + break; + + } + if (!bttv_tvcards[btv->c.type].has_dvb) + bttv_reset_audio(btv); +} + +/* initialization part two -- after registering i2c bus */ +void __devinit bttv_init_card2(struct bttv *btv) +{ + btv->tuner_type = UNSET; + + if (BTTV_BOARD_UNKNOWN == btv->c.type) { + bttv_readee(btv,eeprom_data,0xa0); + identify_by_eeprom(btv,eeprom_data); + } + + switch (btv->c.type) { + case BTTV_BOARD_MIRO: + case BTTV_BOARD_MIROPRO: + case BTTV_BOARD_PINNACLE: + case BTTV_BOARD_PINNACLEPRO: + /* miro/pinnacle */ + miro_pinnacle_gpio(btv); + break; + case BTTV_BOARD_FLYVIDEO_98: + case BTTV_BOARD_MAXI: + case BTTV_BOARD_LIFE_FLYKIT: + case BTTV_BOARD_FLYVIDEO: + case BTTV_BOARD_TYPHOON_TVIEW: + case BTTV_BOARD_CHRONOS_VS2: + case BTTV_BOARD_FLYVIDEO_98FM: + case BTTV_BOARD_FLYVIDEO2000: + case BTTV_BOARD_FLYVIDEO98EZ: + case BTTV_BOARD_CONFERENCETV: + case BTTV_BOARD_LIFETEC_9415: + flyvideo_gpio(btv); + break; + case BTTV_BOARD_HAUPPAUGE: + case BTTV_BOARD_HAUPPAUGE878: + case BTTV_BOARD_HAUPPAUGEPVR: + /* pick up some config infos from the eeprom */ + bttv_readee(btv,eeprom_data,0xa0); + hauppauge_eeprom(btv); + break; + case BTTV_BOARD_AVERMEDIA98: + case BTTV_BOARD_AVPHONE98: + bttv_readee(btv,eeprom_data,0xa0); + avermedia_eeprom(btv); + break; + case BTTV_BOARD_PXC200: + init_PXC200(btv); + break; + case BTTV_BOARD_PICOLO_TETRA_CHIP: + picolo_tetra_init(btv); + break; + case BTTV_BOARD_VHX: + btv->has_radio = 1; + btv->has_matchbox = 1; + btv->mbox_we = 0x20; + btv->mbox_most = 0; + btv->mbox_clk = 0x08; + btv->mbox_data = 0x10; + btv->mbox_mask = 0x38; + break; + case BTTV_BOARD_VOBIS_BOOSTAR: + case BTTV_BOARD_TERRATV: + terratec_active_radio_upgrade(btv); + break; + case BTTV_BOARD_MAGICTVIEW061: + if (btv->cardid == 0x3002144f) { + btv->has_radio=1; + pr_info("%d: radio detected by subsystem id (CPH05x)\n", + btv->c.nr); + } + break; + case BTTV_BOARD_STB2: + if (btv->cardid == 0x3060121a) { + /* Fix up entry for 3DFX VoodooTV 100, + which is an OEM STB card variant. */ + btv->has_radio=0; + btv->tuner_type=TUNER_TEMIC_NTSC; + } + break; + case BTTV_BOARD_OSPREY1x0: + case BTTV_BOARD_OSPREY1x0_848: + case BTTV_BOARD_OSPREY101_848: + case BTTV_BOARD_OSPREY1x1: + case BTTV_BOARD_OSPREY1x1_SVID: + case BTTV_BOARD_OSPREY2xx: + case BTTV_BOARD_OSPREY2x0_SVID: + case BTTV_BOARD_OSPREY2x0: + case BTTV_BOARD_OSPREY440: + case BTTV_BOARD_OSPREY500: + case BTTV_BOARD_OSPREY540: + case BTTV_BOARD_OSPREY2000: + bttv_readee(btv,eeprom_data,0xa0); + osprey_eeprom(btv, eeprom_data); + break; + case BTTV_BOARD_IDS_EAGLE: + init_ids_eagle(btv); + break; + case BTTV_BOARD_MODTEC_205: + bttv_readee(btv,eeprom_data,0xa0); + modtec_eeprom(btv); + break; + case BTTV_BOARD_LMLBT4: + init_lmlbt4x(btv); + break; + case BTTV_BOARD_TIBET_CS16: + tibetCS16_init(btv); + break; + case BTTV_BOARD_KODICOM_4400R: + kodicom4400r_init(btv); + break; + case BTTV_BOARD_GEOVISION_GV800S: + gv800s_init(btv); + break; + } + + /* pll configuration */ + if (!(btv->id==848 && btv->revision==0x11)) { + /* defaults from card list */ + if (PLL_28 == bttv_tvcards[btv->c.type].pll) { + btv->pll.pll_ifreq=28636363; + btv->pll.pll_crystal=BT848_IFORM_XT0; + } + if (PLL_35 == bttv_tvcards[btv->c.type].pll) { + btv->pll.pll_ifreq=35468950; + btv->pll.pll_crystal=BT848_IFORM_XT1; + } + /* insmod options can override */ + switch (pll[btv->c.nr]) { + case 0: /* none */ + btv->pll.pll_crystal = 0; + btv->pll.pll_ifreq = 0; + btv->pll.pll_ofreq = 0; + break; + case 1: /* 28 MHz */ + case 28: + btv->pll.pll_ifreq = 28636363; + btv->pll.pll_ofreq = 0; + btv->pll.pll_crystal = BT848_IFORM_XT0; + break; + case 2: /* 35 MHz */ + case 35: + btv->pll.pll_ifreq = 35468950; + btv->pll.pll_ofreq = 0; + btv->pll.pll_crystal = BT848_IFORM_XT1; + break; + } + } + btv->pll.pll_current = -1; + + /* tuner configuration (from card list / autodetect / insmod option) */ + if (UNSET != bttv_tvcards[btv->c.type].tuner_type) + if (UNSET == btv->tuner_type) + btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type; + if (UNSET != tuner[btv->c.nr]) + btv->tuner_type = tuner[btv->c.nr]; + + if (btv->tuner_type == TUNER_ABSENT) + pr_info("%d: tuner absent\n", btv->c.nr); + else if (btv->tuner_type == UNSET) + pr_warn("%d: tuner type unset\n", btv->c.nr); + else + pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type); + + if (autoload != UNSET) { + pr_warn("%d: the autoload option is obsolete\n", btv->c.nr); + pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n", + btv->c.nr); + } + + if (UNSET == btv->tuner_type) + btv->tuner_type = TUNER_ABSENT; + + btv->dig = bttv_tvcards[btv->c.type].has_dig_in ? + bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET; + btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ? + UNSET : bttv_tvcards[btv->c.type].svhs; + if (svhs[btv->c.nr] != UNSET) + btv->svhs = svhs[btv->c.nr]; + if (remote[btv->c.nr] != UNSET) + btv->has_remote = remote[btv->c.nr]; + + if (bttv_tvcards[btv->c.type].has_radio) + btv->has_radio = 1; + if (bttv_tvcards[btv->c.type].has_remote) + btv->has_remote = 1; + if (!bttv_tvcards[btv->c.type].no_gpioirq) + btv->gpioirq = 1; + if (bttv_tvcards[btv->c.type].volume_gpio) + btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio; + if (bttv_tvcards[btv->c.type].audio_mode_gpio) + btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio; + + if (btv->tuner_type == TUNER_ABSENT) + return; /* no tuner or related drivers to load */ + + if (btv->has_saa6588 || saa6588[btv->c.nr]) { + /* Probe for RDS receiver chip */ + static const unsigned short addrs[] = { + 0x20 >> 1, + 0x22 >> 1, + I2C_CLIENT_END + }; + struct v4l2_subdev *sd; + + sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "saa6588", 0, addrs); + btv->has_saa6588 = (sd != NULL); + } + + /* try to detect audio/fader chips */ + + /* First check if the user specified the audio chip via a module + option. */ + + switch (audiodev[btv->c.nr]) { + case -1: + return; /* do not load any audio module */ + + case 0: /* autodetect */ + break; + + case 1: { + /* The user specified that we should probe for msp3400 */ + static const unsigned short addrs[] = { + I2C_ADDR_MSP3400 >> 1, + I2C_ADDR_MSP3400_ALT >> 1, + I2C_CLIENT_END + }; + + btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "msp3400", 0, addrs); + if (btv->sd_msp34xx) + return; + goto no_audio; + } + + case 2: { + /* The user specified that we should probe for tda7432 */ + static const unsigned short addrs[] = { + I2C_ADDR_TDA7432 >> 1, + I2C_CLIENT_END + }; + + if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tda7432", 0, addrs)) + return; + goto no_audio; + } + + case 3: { + /* The user specified that we should probe for tvaudio */ + btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); + if (btv->sd_tvaudio) + return; + goto no_audio; + } + + default: + pr_warn("%d: unknown audiodev value!\n", btv->c.nr); + return; + } + + /* There were no overrides, so now we try to discover this through the + card definition */ + + /* probe for msp3400 first: this driver can detect whether or not + it really is a msp3400, so it will return NULL when the device + found is really something else (e.g. a tea6300). */ + if (!bttv_tvcards[btv->c.type].no_msp34xx) { + btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "msp3400", + 0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1)); + } else if (bttv_tvcards[btv->c.type].msp34xx_alt) { + btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "msp3400", + 0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1)); + } + + /* If we found a msp34xx, then we're done. */ + if (btv->sd_msp34xx) + return; + + /* it might also be a tda7432. */ + if (!bttv_tvcards[btv->c.type].no_tda7432) { + static const unsigned short addrs[] = { + I2C_ADDR_TDA7432 >> 1, + I2C_CLIENT_END + }; + + if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tda7432", 0, addrs)) + return; + } + + /* Now see if we can find one of the tvaudio devices. */ + btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); + if (btv->sd_tvaudio) + return; + +no_audio: + pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr); +} + + +/* initialize the tuner */ +void __devinit bttv_init_tuner(struct bttv *btv) +{ + int addr = ADDR_UNSET; + + if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr) + addr = bttv_tvcards[btv->c.type].tuner_addr; + + if (btv->tuner_type != TUNER_ABSENT) { + struct tuner_setup tun_setup; + + /* Load tuner module before issuing tuner config call! */ + if (btv->has_radio) + v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tuner", + 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO)); + v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tuner", + 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); + v4l2_i2c_new_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tuner", + 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD)); + + tun_setup.mode_mask = T_ANALOG_TV; + tun_setup.type = btv->tuner_type; + tun_setup.addr = addr; + + if (btv->has_radio) + tun_setup.mode_mask |= T_RADIO; + + bttv_call_all(btv, tuner, s_type_addr, &tun_setup); + } + + if (btv->tda9887_conf) { + struct v4l2_priv_tun_config tda9887_cfg; + + tda9887_cfg.tuner = TUNER_TDA9887; + tda9887_cfg.priv = &btv->tda9887_conf; + + bttv_call_all(btv, tuner, s_config, &tda9887_cfg); + } +} + +/* ----------------------------------------------------------------------- */ + +static void modtec_eeprom(struct bttv *btv) +{ + if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) { + btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I; + pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", + btv->c.nr, &eeprom_data[0x1e]); + } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) { + btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I; + pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", + btv->c.nr, &eeprom_data[0x1e]); + } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) { + btv->tuner_type=TUNER_PHILIPS_NTSC; + pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", + btv->c.nr, &eeprom_data[0x1e]); + } else { + pr_info("%d: Modtec: Unknown TunerString: %s\n", + btv->c.nr, &eeprom_data[0x1e]); + } +} + +static void __devinit hauppauge_eeprom(struct bttv *btv) +{ + struct tveeprom tv; + + tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data); + btv->tuner_type = tv.tuner_type; + btv->has_radio = tv.has_radio; + + pr_info("%d: Hauppauge eeprom indicates model#%d\n", + btv->c.nr, tv.model); + + /* + * Some of the 878 boards have duplicate PCI IDs. Switch the board + * type based on model #. + */ + if(tv.model == 64900) { + pr_info("%d: Switching board type from %s to %s\n", + btv->c.nr, + bttv_tvcards[btv->c.type].name, + bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name); + btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB; + } + + /* The 61334 needs the msp3410 to do the radio demod to get sound */ + if (tv.model == 61334) + btv->radio_uses_msp_demodulator = 1; +} + +static int terratec_active_radio_upgrade(struct bttv *btv) +{ + int freq; + + btv->has_radio = 1; + btv->has_matchbox = 1; + btv->mbox_we = 0x10; + btv->mbox_most = 0x20; + btv->mbox_clk = 0x08; + btv->mbox_data = 0x04; + btv->mbox_mask = 0x3c; + + btv->mbox_iow = 1 << 8; + btv->mbox_ior = 1 << 9; + btv->mbox_csel = 1 << 10; + + freq=88000/62.5; + tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */ + if (0x1ed8 == tea5757_read(btv)) { + pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr); + btv->has_radio = 1; + btv->has_saa6588 = 1; + btv->has_matchbox = 1; + } else { + btv->has_radio = 0; + btv->has_matchbox = 0; + } + return 0; +} + + +/* ----------------------------------------------------------------------- */ + +/* + * minimal bootstrap for the WinTV/PVR -- upload altera firmware. + * + * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have + * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be + * unpacked with unzip). + */ +#define PVR_GPIO_DELAY 10 + +#define BTTV_ALT_DATA 0x000001 +#define BTTV_ALT_DCLK 0x100000 +#define BTTV_ALT_NCONFIG 0x800000 + +static int __devinit pvr_altera_load(struct bttv *btv, const u8 *micro, + u32 microlen) +{ + u32 n; + u8 bits; + int i; + + gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG); + gpio_write(0); + udelay(PVR_GPIO_DELAY); + + gpio_write(BTTV_ALT_NCONFIG); + udelay(PVR_GPIO_DELAY); + + for (n = 0; n < microlen; n++) { + bits = micro[n]; + for (i = 0 ; i < 8 ; i++) { + gpio_bits(BTTV_ALT_DCLK,0); + if (bits & 0x01) + gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA); + else + gpio_bits(BTTV_ALT_DATA,0); + gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); + bits >>= 1; + } + } + gpio_bits(BTTV_ALT_DCLK,0); + udelay(PVR_GPIO_DELAY); + + /* begin Altera init loop (Not necessary,but doesn't hurt) */ + for (i = 0 ; i < 30 ; i++) { + gpio_bits(BTTV_ALT_DCLK,0); + gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); + } + gpio_bits(BTTV_ALT_DCLK,0); + return 0; +} + +static int __devinit pvr_boot(struct bttv *btv) +{ + const struct firmware *fw_entry; + int rc; + + rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev); + if (rc != 0) { + pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr); + return rc; + } + rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size); + pr_info("%d: altera firmware upload %s\n", + btv->c.nr, (rc < 0) ? "failed" : "ok"); + release_firmware(fw_entry); + return rc; +} + +/* ----------------------------------------------------------------------- */ +/* some osprey specific stuff */ + +static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256]) +{ + int i; + u32 serial = 0; + int cardid = -1; + + /* This code will nevery actually get called in this case.... */ + if (btv->c.type == BTTV_BOARD_UNKNOWN) { + /* this might be an antique... check for MMAC label in eeprom */ + if (!strncmp(ee, "MMAC", 4)) { + u8 checksum = 0; + for (i = 0; i < 21; i++) + checksum += ee[i]; + if (checksum != ee[21]) + return; + cardid = BTTV_BOARD_OSPREY1x0_848; + for (i = 12; i < 21; i++) + serial *= 10, serial += ee[i] - '0'; + } + } else { + unsigned short type; + + for (i = 4*16; i < 8*16; i += 16) { + u16 checksum = ip_compute_csum(ee + i, 16); + + if ((checksum&0xff) + (checksum>>8) == 0xff) + break; + } + if (i >= 8*16) + return; + ee += i; + + /* found a valid descriptor */ + type = get_unaligned_be16((__be16 *)(ee+4)); + + switch(type) { + /* 848 based */ + case 0x0004: + cardid = BTTV_BOARD_OSPREY1x0_848; + break; + case 0x0005: + cardid = BTTV_BOARD_OSPREY101_848; + break; + + /* 878 based */ + case 0x0012: + case 0x0013: + cardid = BTTV_BOARD_OSPREY1x0; + break; + case 0x0014: + case 0x0015: + cardid = BTTV_BOARD_OSPREY1x1; + break; + case 0x0016: + case 0x0017: + case 0x0020: + cardid = BTTV_BOARD_OSPREY1x1_SVID; + break; + case 0x0018: + case 0x0019: + case 0x001E: + case 0x001F: + cardid = BTTV_BOARD_OSPREY2xx; + break; + case 0x001A: + case 0x001B: + cardid = BTTV_BOARD_OSPREY2x0_SVID; + break; + case 0x0040: + cardid = BTTV_BOARD_OSPREY500; + break; + case 0x0050: + case 0x0056: + cardid = BTTV_BOARD_OSPREY540; + /* bttv_osprey_540_init(btv); */ + break; + case 0x0060: + case 0x0070: + case 0x00A0: + cardid = BTTV_BOARD_OSPREY2x0; + /* enable output on select control lines */ + gpio_inout(0xffffff,0x000303); + break; + case 0x00D8: + cardid = BTTV_BOARD_OSPREY440; + break; + default: + /* unknown...leave generic, but get serial # */ + pr_info("%d: osprey eeprom: unknown card type 0x%04x\n", + btv->c.nr, type); + break; + } + serial = get_unaligned_be32((__be32 *)(ee+6)); + } + + pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n", + btv->c.nr, cardid, + cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial); + + if (cardid<0 || btv->c.type == cardid) + return; + + /* card type isn't set correctly */ + if (card[btv->c.nr] < bttv_num_tvcards) { + pr_warn("%d: osprey eeprom: Not overriding user specified card type\n", + btv->c.nr); + } else { + pr_info("%d: osprey eeprom: Changing card type from %d to %d\n", + btv->c.nr, btv->c.type, cardid); + btv->c.type = cardid; + } +} + +/* ----------------------------------------------------------------------- */ +/* AVermedia specific stuff, from bktr_card.c */ + +static int tuner_0_table[] = { + TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/, + TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/, + TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL, + TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM, + TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL, + TUNER_PHILIPS_FM1216ME_MK3 }; + +static int tuner_1_table[] = { + TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL, + TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, + TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, + TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */ + TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL}; + +static void __devinit avermedia_eeprom(struct bttv *btv) +{ + int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0; + + tuner_make = (eeprom_data[0x41] & 0x7); + tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3; + tuner_format = (eeprom_data[0x42] & 0xf0) >> 4; + btv->has_remote = (eeprom_data[0x42] & 0x01); + + if (tuner_make == 0 || tuner_make == 2) + if (tuner_format <= 0x0a) + tuner_type = tuner_0_table[tuner_format]; + if (tuner_make == 1) + if (tuner_format <= 9) + tuner_type = tuner_1_table[tuner_format]; + + if (tuner_make == 4) + if (tuner_format == 0x09) + tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */ + + pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=", + btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]); + if (tuner_type) { + btv->tuner_type = tuner_type; + pr_cont("%d", tuner_type); + } else + pr_cont("Unknown type"); + pr_cont(" radio:%s remote control:%s\n", + tuner_tv_fm ? "yes" : "no", + btv->has_remote ? "yes" : "no"); +} + +/* + * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880 + * analog demod, which is not I2C controlled like the newer and more common + * TDA9887 series. Instead is has two tri-state input pins, S0 and S1, + * that control the IF for the video and audio. Apparently, bttv GPIO + * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I + * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC). + */ +u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits) +{ + + if (btv->audio == TVAUDIO_INPUT_TUNER) { + if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN) + gpiobits |= 0x10000; + else + gpiobits &= ~0x10000; + } + + gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits); + return gpiobits; +} + + +/* + * reset/enable the MSP on some Hauppauge cards + * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)! + * + * Hauppauge: pin 5 + * Voodoo: pin 20 + */ +static void __devinit boot_msp34xx(struct bttv *btv, int pin) +{ + int mask = (1 << pin); + + gpio_inout(mask,mask); + gpio_bits(mask,0); + mdelay(2); + udelay(500); + gpio_bits(mask,mask); + + if (bttv_gpio) + bttv_gpio_tracking(btv,"msp34xx"); + if (bttv_verbose) + pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n", + btv->c.nr, pin); +} + +/* ----------------------------------------------------------------------- */ +/* Imagenation L-Model PXC200 Framegrabber */ +/* This is basically the same procedure as + * used by Alessandro Rubini in his pxc200 + * driver, but using BTTV functions */ + +static void __devinit init_PXC200(struct bttv *btv) +{ + static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, + 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, + 0x00 }; + unsigned int i; + int tmp; + u32 val; + + /* Initialise GPIO-connevted stuff */ + gpio_inout(0xffffff, (1<<13)); + gpio_write(0); + udelay(3); + gpio_write(1<<13); + /* GPIO inputs are pulled up, so no need to drive + * reset pin any longer */ + gpio_bits(0xffffff, 0); + if (bttv_gpio) + bttv_gpio_tracking(btv,"pxc200"); + + /* we could/should try and reset/control the AD pots? but + right now we simply turned off the crushing. Without + this the AGC drifts drifts + remember the EN is reverse logic --> + setting BT848_ADC_AGC_EN disable the AGC + tboult@eecs.lehigh.edu + */ + + btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC); + + /* Initialise MAX517 DAC */ + pr_info("Setting DAC reference voltage level ...\n"); + bttv_I2CWrite(btv,0x5E,0,0x80,1); + + /* Initialise 12C508 PIC */ + /* The I2CWrite and I2CRead commmands are actually to the + * same chips - but the R/W bit is included in the address + * argument so the numbers are different */ + + + pr_info("Initialising 12C508 PIC chip ...\n"); + + /* First of all, enable the clock line. This is used in the PXC200-F */ + val = btread(BT848_GPIO_DMA_CTL); + val |= BT848_GPIO_DMA_CTL_GPCLKMODE; + btwrite(val, BT848_GPIO_DMA_CTL); + + /* Then, push to 0 the reset pin long enough to reset the * + * device same as above for the reset line, but not the same + * value sent to the GPIO-connected stuff + * which one is the good one? */ + gpio_inout(0xffffff,(1<<2)); + gpio_write(0); + udelay(10); + gpio_write(1<<2); + + for (i = 0; i < ARRAY_SIZE(vals); i++) { + tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1); + if (tmp != -1) { + pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n", + vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL)); + } + } + + pr_info("PXC200 Initialised\n"); +} + + + +/* ----------------------------------------------------------------------- */ +/* + * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock + * it. This apparently involves the following procedure for each 878 chip: + * + * 1) write 0x00C3FEFF to the GPIO_OUT_EN register + * + * 2) write to GPIO_DATA + * - 0x0E + * - sleep 1ms + * - 0x10 + 0x0E + * - sleep 10ms + * - 0x0E + * read from GPIO_DATA into buf (uint_32) + * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 ) + * error. ERROR_CPLD_Check_Failed stop. + * + * 3) write to GPIO_DATA + * - write 0x4400 + 0x0E + * - sleep 10ms + * - write 0x4410 + 0x0E + * - sleep 1ms + * - write 0x0E + * read from GPIO_DATA into buf (uint_32) + * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 ) + * error. ERROR_CPLD_Check_Failed. + */ +/* ----------------------------------------------------------------------- */ +static void +init_RTV24 (struct bttv *btv) +{ + uint32_t dataRead = 0; + long watchdog_value = 0x0E; + + pr_info("%d: Adlink RTV-24 initialisation in progress ...\n", + btv->c.nr); + + btwrite (0x00c3feff, BT848_GPIO_OUT_EN); + + btwrite (0 + watchdog_value, BT848_GPIO_DATA); + msleep (1); + btwrite (0x10 + watchdog_value, BT848_GPIO_DATA); + msleep (10); + btwrite (0 + watchdog_value, BT848_GPIO_DATA); + + dataRead = btread (BT848_GPIO_DATA); + + if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) { + pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n", + btv->c.nr, dataRead); + } + + btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA); + msleep (10); + btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA); + msleep (1); + btwrite (watchdog_value, BT848_GPIO_DATA); + msleep (1); + dataRead = btread (BT848_GPIO_DATA); + + if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) { + pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n", + btv->c.nr, dataRead); + + return; + } + + pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr); +} + + + +/* ----------------------------------------------------------------------- */ +/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */ +/* + * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu> + * This code is placed under the terms of the GNU General Public License + * + * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00 + */ + +static void bus_low(struct bttv *btv, int bit) +{ + if (btv->mbox_ior) { + gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, + btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); + udelay(5); + } + + gpio_bits(bit,0); + udelay(5); + + if (btv->mbox_ior) { + gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); + udelay(5); + } +} + +static void bus_high(struct bttv *btv, int bit) +{ + if (btv->mbox_ior) { + gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, + btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); + udelay(5); + } + + gpio_bits(bit,bit); + udelay(5); + + if (btv->mbox_ior) { + gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); + udelay(5); + } +} + +static int bus_in(struct bttv *btv, int bit) +{ + if (btv->mbox_ior) { + gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, + btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); + udelay(5); + + gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); + udelay(5); + } + return gpio_read() & (bit); +} + +/* TEA5757 register bits */ +#define TEA_FREQ 0:14 +#define TEA_BUFFER 15:15 + +#define TEA_SIGNAL_STRENGTH 16:17 + +#define TEA_PORT1 18:18 +#define TEA_PORT0 19:19 + +#define TEA_BAND 20:21 +#define TEA_BAND_FM 0 +#define TEA_BAND_MW 1 +#define TEA_BAND_LW 2 +#define TEA_BAND_SW 3 + +#define TEA_MONO 22:22 +#define TEA_ALLOW_STEREO 0 +#define TEA_FORCE_MONO 1 + +#define TEA_SEARCH_DIRECTION 23:23 +#define TEA_SEARCH_DOWN 0 +#define TEA_SEARCH_UP 1 + +#define TEA_STATUS 24:24 +#define TEA_STATUS_TUNED 0 +#define TEA_STATUS_SEARCHING 1 + +/* Low-level stuff */ +static int tea5757_read(struct bttv *btv) +{ + unsigned long timeout; + int value = 0; + int i; + + /* better safe than sorry */ + gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we); + + if (btv->mbox_ior) { + gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, + btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); + udelay(5); + } + + if (bttv_gpio) + bttv_gpio_tracking(btv,"tea5757 read"); + + bus_low(btv,btv->mbox_we); + bus_low(btv,btv->mbox_clk); + + udelay(10); + timeout= jiffies + msecs_to_jiffies(1000); + + /* wait for DATA line to go low; error if it doesn't */ + while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout)) + schedule(); + if (bus_in(btv,btv->mbox_data)) { + pr_warn("%d: tea5757: read timeout\n", btv->c.nr); + return -1; + } + + dprintk("%d: tea5757:", btv->c.nr); + for (i = 0; i < 24; i++) { + udelay(5); + bus_high(btv,btv->mbox_clk); + udelay(5); + dprintk_cont("%c", + bus_in(btv, btv->mbox_most) == 0 ? 'T' : '-'); + bus_low(btv,btv->mbox_clk); + value <<= 1; + value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */ + dprintk_cont("%c", + bus_in(btv, btv->mbox_most) == 0 ? 'S' : 'M'); + } + dprintk_cont("\n"); + dprintk("%d: tea5757: read 0x%X\n", btv->c.nr, value); + return value; +} + +static int tea5757_write(struct bttv *btv, int value) +{ + int i; + int reg = value; + + gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data); + + if (btv->mbox_ior) { + gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, + btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); + udelay(5); + } + if (bttv_gpio) + bttv_gpio_tracking(btv,"tea5757 write"); + + dprintk("%d: tea5757: write 0x%X\n", btv->c.nr, value); + bus_low(btv,btv->mbox_clk); + bus_high(btv,btv->mbox_we); + for (i = 0; i < 25; i++) { + if (reg & 0x1000000) + bus_high(btv,btv->mbox_data); + else + bus_low(btv,btv->mbox_data); + reg <<= 1; + bus_high(btv,btv->mbox_clk); + udelay(10); + bus_low(btv,btv->mbox_clk); + udelay(10); + } + bus_low(btv,btv->mbox_we); /* unmute !!! */ + return 0; +} + +void tea5757_set_freq(struct bttv *btv, unsigned short freq) +{ + dprintk("tea5757_set_freq %d\n",freq); + tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */ +} + +/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas] + * + * This is needed because rv605 don't use a normal multiplex, but a crosspoint + * switch instead (CD22M3494E). This IC can have multiple active connections + * between Xn (input) and Yn (output) pins. We need to clear any existing + * connection prior to establish a new one, pulsing the STROBE pin. + * + * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin. + * GPIO pins are wired as: + * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller) + * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller) + * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller) + * GPIO[8] - - P3[5] (microcontroller) + * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller) + * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller) + * GPINTR - - P3[4] (microcontroller) + * + * The microcontroller is a 80C32 like. It should be possible to change xpoint + * configuration either directly (as we are doing) or using the microcontroller + * which is also wired to I2C interface. I have no further info on the + * microcontroller features, one would need to disassembly the firmware. + * note: the vendor refused to give any information on this product, all + * that stuff was found using a multimeter! :) + */ +static void rv605_muxsel(struct bttv *btv, unsigned int input) +{ + static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0, + 0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa }; + + gpio_bits(0x07f, muxgpio[input]); + + /* reset all conections */ + gpio_bits(0x200,0x200); + mdelay(1); + gpio_bits(0x200,0x000); + mdelay(1); + + /* create a new connection */ + gpio_bits(0x480,0x480); + mdelay(1); + gpio_bits(0x480,0x080); + mdelay(1); +} + +/* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning] + * + * The CS16 (available on eBay cheap) is a PCI board with four Fusion + * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator + * chips, ten eight input analog multiplexors, a not chip and a few + * other components. + * + * 16 inputs on a secondary bracket are provided and can be selected + * from each of the four capture chips. Two of the eight input + * multiplexors are used to select from any of the 16 input signals. + * + * Unsupported hardware capabilities: + * . A video output monitor on the secondary bracket can be selected from + * one of the 878A chips. + * . Another passthrough but I haven't spent any time investigating it. + * . Digital I/O (logic level connected to GPIO) is available from an + * onboard header. + * + * The on chip input mux should always be set to 2. + * GPIO[16:19] - Video input selection + * GPIO[0:3] - Video output monitor select (only available from one 878A) + * GPIO[?:?] - Digital I/O. + * + * There is an ATMEL microcontroller with an 8031 core on board. I have not + * determined what function (if any) it provides. With the microcontroller + * and sync separator chips a guess is that it might have to do with video + * switching and maybe some digital I/O. + */ +static void tibetCS16_muxsel(struct bttv *btv, unsigned int input) +{ + /* video mux */ + gpio_bits(0x0f0000, input << 16); +} + +static void tibetCS16_init(struct bttv *btv) +{ + /* enable gpio bits, mask obtained via btSpy */ + gpio_inout(0xffffff, 0x0f7fff); + gpio_write(0x0f7fff); +} + +/* + * The following routines for the Kodicom-4400r get a little mind-twisting. + * There is a "master" controller and three "slave" controllers, together + * an analog switch which connects any of 16 cameras to any of the BT87A's. + * The analog switch is controlled by the "master", but the detection order + * of the four BT878A chips is in an order which I just don't understand. + * The "master" is actually the second controller to be detected. The + * logic on the board uses logical numbers for the 4 controllers, but + * those numbers are different from the detection sequence. When working + * with the analog switch, we need to "map" from the detection sequence + * over to the board's logical controller number. This mapping sequence + * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical + * unit 3, the second (which is the master) is logical unit 0, etc. + * We need to maintain the status of the analog switch (which of the 16 + * cameras is connected to which of the 4 controllers). Rather than + * add to the bttv structure for this, we use the data reserved for + * the mbox (unused for this card type). + */ + +/* + * First a routine to set the analog switch, which controls which camera + * is routed to which controller. The switch comprises an X-address + * (gpio bits 0-3, representing the camera, ranging from 0-15), and a + * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3). + * A data value (gpio bit 7) of '1' enables the switch, and '0' disables + * the switch. A STROBE bit (gpio bit 8) latches the data value into the + * specified address. The idea is to set the address and data, then bring + * STROBE high, and finally bring STROBE back to low. + */ +static void kodicom4400r_write(struct bttv *btv, + unsigned char xaddr, + unsigned char yaddr, + unsigned char data) { + unsigned int udata; + + udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf); + gpio_bits(0x1ff, udata); /* write ADDR and DAT */ + gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */ + gpio_bits(0x1ff, udata); /* strobe low */ +} + +/* + * Next the mux select. Both the "master" and "slave" 'cards' (controllers) + * use this routine. The routine finds the "master" for the card, maps + * the controller number from the detected position over to the logical + * number, writes the appropriate data to the analog switch, and housekeeps + * the local copy of the switch information. The parameter 'input' is the + * requested camera number (0 - 15). + */ +static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input) +{ + char *sw_status; + int xaddr, yaddr; + struct bttv *mctlr; + static unsigned char map[4] = {3, 0, 2, 1}; + + mctlr = master[btv->c.nr]; + if (mctlr == NULL) { /* ignore if master not yet detected */ + return; + } + yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */ + yaddr = map[yaddr]; + sw_status = (char *)(&mctlr->mbox_we); + xaddr = input & 0xf; + /* Check if the controller/camera pair has changed, else ignore */ + if (sw_status[yaddr] != xaddr) + { + /* "open" the old switch, "close" the new one, save the new */ + kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0); + sw_status[yaddr] = xaddr; + kodicom4400r_write(mctlr, xaddr, yaddr, 1); + } +} + +/* + * During initialisation, we need to reset the analog switch. We + * also preset the switch to map the 4 connectors on the card to the + * *user's* (see above description of kodicom4400r_muxsel) channels + * 0 through 3 + */ +static void kodicom4400r_init(struct bttv *btv) +{ + char *sw_status = (char *)(&btv->mbox_we); + int ix; + + gpio_inout(0x0003ff, 0x0003ff); + gpio_write(1 << 9); /* reset MUX */ + gpio_write(0); + /* Preset camera 0 to the 4 controllers */ + for (ix = 0; ix < 4; ix++) { + sw_status[ix] = ix; + kodicom4400r_write(btv, ix, ix, 1); + } + /* + * Since this is the "master", we need to set up the + * other three controller chips' pointers to this structure + * for later use in the muxsel routine. + */ + if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3)) + return; + master[btv->c.nr-1] = btv; + master[btv->c.nr] = btv; + master[btv->c.nr+1] = btv; + master[btv->c.nr+2] = btv; +} + +/* The Grandtec X-Guard framegrabber card uses two Dual 4-channel + * video multiplexers to provide up to 16 video inputs. These + * multiplexers are controlled by the lower 8 GPIO pins of the + * bt878. The multiplexers probably Pericom PI5V331Q or similar. + + * xxx0 is pin xxx of multiplexer U5, + * yyy1 is pin yyy of multiplexer U2 + */ +#define ENA0 0x01 +#define ENB0 0x02 +#define ENA1 0x04 +#define ENB1 0x08 + +#define IN10 0x10 +#define IN00 0x20 +#define IN11 0x40 +#define IN01 0x80 + +static void xguard_muxsel(struct bttv *btv, unsigned int input) +{ + static const int masks[] = { + ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10, + ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10, + ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11, + ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11, + }; + gpio_write(masks[input%16]); +} +static void picolo_tetra_init(struct bttv *btv) +{ + /*This is the video input redirection fonctionality : I DID NOT USED IT. */ + btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */ + btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/ +} +static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input) +{ + + dprintk("%d : picolo_tetra_muxsel => input = %d\n", btv->c.nr, input); + /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/ + /*GPIO[20]&GPIO[21] used to choose the right input*/ + btwrite (input<<20,BT848_GPIO_DATA); + +} + +/* + * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>] + * + * The IVC120G security card has 4 i2c controlled TDA8540 matrix + * swichers to provide 16 channels to MUX0. The TDA8540's have + * 4 independent outputs and as such the IVC120G also has the + * optional "Monitor Out" bus. This allows the card to be looking + * at one input while the monitor is looking at another. + * + * Since I've couldn't be bothered figuring out how to add an + * independent muxsel for the monitor bus, I've just set it to + * whatever the card is looking at. + * + * OUT0 of the TDA8540's is connected to MUX0 (0x03) + * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C) + * + * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03) + * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03) + * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03) + * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03) + * + */ + +/* All 7 possible sub-ids for the TDA8540 Matrix Switcher */ +#define I2C_TDA8540 0x90 +#define I2C_TDA8540_ALT1 0x92 +#define I2C_TDA8540_ALT2 0x94 +#define I2C_TDA8540_ALT3 0x96 +#define I2C_TDA8540_ALT4 0x98 +#define I2C_TDA8540_ALT5 0x9a +#define I2C_TDA8540_ALT6 0x9c + +static void ivc120_muxsel(struct bttv *btv, unsigned int input) +{ + /* Simple maths */ + int key = input % 4; + int matrix = input / 4; + + dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n", + btv->c.nr, input, matrix, key); + + /* Handles the input selection on the TDA8540's */ + bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00, + ((matrix == 3) ? (key | key << 2) : 0x00), 1); + bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00, + ((matrix == 0) ? (key | key << 2) : 0x00), 1); + bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00, + ((matrix == 1) ? (key | key << 2) : 0x00), 1); + bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00, + ((matrix == 2) ? (key | key << 2) : 0x00), 1); + + /* Handles the output enables on the TDA8540's */ + bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02, + ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */ + bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02, + ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */ + bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02, + ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */ + bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02, + ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */ + + /* 878's MUX0 is already selected for input via muxsel values */ +} + + +/* PXC200 muxsel helper + * luke@syseng.anu.edu.au + * another transplant + * from Alessandro Rubini (rubini@linux.it) + * + * There are 4 kinds of cards: + * PXC200L which is bt848 + * PXC200F which is bt848 with PIC controlling mux + * PXC200AL which is bt878 + * PXC200AF which is bt878 with PIC controlling mux + */ +#define PX_CFG_PXC200F 0x01 +#define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */ +#define PX_I2C_PIC 0x0f +#define PX_PXC200A_CARDID 0x200a1295 +#define PX_I2C_CMD_CFG 0x00 + +static void PXC200_muxsel(struct bttv *btv, unsigned int input) +{ + int rc; + long mux; + int bitmask; + unsigned char buf[2]; + + /* Read PIC config to determine if this is a PXC200F */ + /* PX_I2C_CMD_CFG*/ + buf[0]=0; + buf[1]=0; + rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1); + if (rc) { + pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n", + btv->c.nr, rc); + /* not PXC ? do nothing */ + return; + } + + rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL); + if (!(rc & PX_CFG_PXC200F)) { + pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n", + btv->c.nr, rc); + return; + } + + + /* The multiplexer in the 200F is handled by the GPIO port */ + /* get correct mapping between inputs */ + /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */ + /* ** not needed!? */ + mux = input; + + /* make sure output pins are enabled */ + /* bitmask=0x30f; */ + bitmask=0x302; + /* check whether we have a PXC200A */ + if (btv->cardid == PX_PXC200A_CARDID) { + bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */ + bitmask |= 7<<4; /* the DAC */ + } + btwrite(bitmask, BT848_GPIO_OUT_EN); + + bitmask = btread(BT848_GPIO_DATA); + if (btv->cardid == PX_PXC200A_CARDID) + bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7); + else /* older device */ + bitmask = (bitmask & ~0x300) | ((mux & 3) << 8); + btwrite(bitmask,BT848_GPIO_DATA); + + /* + * Was "to be safe, set the bt848 to input 0" + * Actually, since it's ok at load time, better not messing + * with these bits (on PXC200AF you need to set mux 2 here) + * + * needed because bttv-driver sets mux before calling this function + */ + if (btv->cardid == PX_PXC200A_CARDID) + btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM); + else /* older device */ + btand(~BT848_IFORM_MUXSEL,BT848_IFORM); + + pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux); +} + +static void phytec_muxsel(struct bttv *btv, unsigned int input) +{ + unsigned int mux = input % 4; + + if (input == btv->svhs) + mux = 0; + + gpio_bits(0x3, mux); +} + +/* + * GeoVision GV-800(S) functions + * Bruno Christo <bchristo@inf.ufsm.br> +*/ + +/* This is a function to control the analog switch, which determines which + * camera is routed to which controller. The switch comprises an X-address + * (gpio bits 0-3, representing the camera, ranging from 0-15), and a + * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3). + * A data value (gpio bit 18) of '1' enables the switch, and '0' disables + * the switch. A STROBE bit (gpio bit 17) latches the data value into the + * specified address. There is also a chip select (gpio bit 16). + * The idea is to set the address and chip select together, bring + * STROBE high, write the data, and finally bring STROBE back to low. + */ +static void gv800s_write(struct bttv *btv, + unsigned char xaddr, + unsigned char yaddr, + unsigned char data) { + /* On the "master" 878A: + * GPIO bits 0-9 are used for the analog switch: + * 00 - 03: camera selector + * 04 - 06: 878A (controller) selector + * 16: cselect + * 17: strobe + * 18: data (1->on, 0->off) + * 19: reset + */ + const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4); + const u32 CSELECT = 1<<16; + const u32 STROBE = 1<<17; + const u32 DATA = data<<18; + + gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */ + gpio_bits(0x20000, STROBE); /* STROBE high */ + gpio_bits(0x40000, DATA); /* write DATA */ + gpio_bits(0x20000, ~STROBE); /* STROBE low */ +} + +/* + * GeoVision GV-800(S) muxsel + * + * Each of the 4 cards (controllers) use this function. + * The controller using this function selects the input through the GPIO pins + * of the "master" card. A pointer to this card is stored in master[btv->c.nr]. + * + * The parameter 'input' is the requested camera number (0-4) on the controller. + * The map array has the address of each input. Note that the addresses in the + * array are in the sequence the original GeoVision driver uses, that is, set + * every controller to input 0, then to input 1, 2, 3, repeat. This means that + * the physical "camera 1" connector corresponds to controller 0 input 0, + * "camera 2" corresponds to controller 1 input 0, and so on. + * + * After getting the input address, the function then writes the appropriate + * data to the analog switch, and housekeeps the local copy of the switch + * information. + */ +static void gv800s_muxsel(struct bttv *btv, unsigned int input) +{ + struct bttv *mctlr; + char *sw_status; + int xaddr, yaddr; + static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 }, + { 0x1, 0x5, 0xb, 0x7 }, + { 0x2, 0x8, 0xc, 0xe }, + { 0x3, 0x9, 0xd, 0xf } }; + input = input%4; + mctlr = master[btv->c.nr]; + if (mctlr == NULL) { + /* do nothing until the "master" is detected */ + return; + } + yaddr = (btv->c.nr - mctlr->c.nr) & 3; + sw_status = (char *)(&mctlr->mbox_we); + xaddr = map[yaddr][input] & 0xf; + + /* Check if the controller/camera pair has changed, ignore otherwise */ + if (sw_status[yaddr] != xaddr) { + /* disable the old switch, enable the new one and save status */ + gv800s_write(mctlr, sw_status[yaddr], yaddr, 0); + sw_status[yaddr] = xaddr; + gv800s_write(mctlr, xaddr, yaddr, 1); + } +} + +/* GeoVision GV-800(S) "master" chip init */ +static void gv800s_init(struct bttv *btv) +{ + char *sw_status = (char *)(&btv->mbox_we); + int ix; + + gpio_inout(0xf107f, 0xf107f); + gpio_write(1<<19); /* reset the analog MUX */ + gpio_write(0); + + /* Preset camera 0 to the 4 controllers */ + for (ix = 0; ix < 4; ix++) { + sw_status[ix] = ix; + gv800s_write(btv, ix, ix, 1); + } + + /* Inputs on the "master" controller need this brightness fix */ + bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1); + + if (btv->c.nr > BTTV_MAX-4) + return; + /* + * Store the "master" controller pointer in the master + * array for later use in the muxsel function. + */ + master[btv->c.nr] = btv; + master[btv->c.nr+1] = btv; + master[btv->c.nr+2] = btv; + master[btv->c.nr+3] = btv; +} + +/* ----------------------------------------------------------------------- */ +/* motherboard chipset specific stuff */ + +void __init bttv_check_chipset(void) +{ + int pcipci_fail = 0; + struct pci_dev *dev = NULL; + + if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */ + pcipci_fail = 1; + if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF)) + triton1 = 1; + if (pci_pci_problems & PCIPCI_VSFX) + vsfx = 1; +#ifdef PCIPCI_ALIMAGIK + if (pci_pci_problems & PCIPCI_ALIMAGIK) + latency = 0x0A; +#endif + + + /* print warnings about any quirks found */ + if (triton1) + pr_info("Host bridge needs ETBF enabled\n"); + if (vsfx) + pr_info("Host bridge needs VSFX enabled\n"); + if (pcipci_fail) { + pr_info("bttv and your chipset may not work together\n"); + if (!no_overlay) { + pr_info("overlay will be disabled\n"); + no_overlay = 1; + } else { + pr_info("overlay forced. Use this option at your own risk.\n"); + } + } + if (UNSET != latency) + pr_info("pci latency fixup [%d]\n", latency); + while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82441, dev))) { + unsigned char b; + pci_read_config_byte(dev, 0x53, &b); + if (bttv_debug) + pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n", + b); + } +} + +int __devinit bttv_handle_chipset(struct bttv *btv) +{ + unsigned char command; + + if (!triton1 && !vsfx && UNSET == latency) + return 0; + + if (bttv_verbose) { + if (triton1) + pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n", + btv->c.nr); + if (vsfx && btv->id >= 878) + pr_info("%d: enabling VSFX\n", btv->c.nr); + if (UNSET != latency) + pr_info("%d: setting pci timer to %d\n", + btv->c.nr, latency); + } + + if (btv->id < 878) { + /* bt848 (mis)uses a bit in the irq mask for etbf */ + if (triton1) + btv->triton1 = BT848_INT_ETBF; + } else { + /* bt878 has a bit in the pci config space for it */ + pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command); + if (triton1) + command |= BT878_EN_TBFX; + if (vsfx) + command |= BT878_EN_VSFX; + pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command); + } + if (UNSET != latency) + pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency); + return 0; +} + + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ |
