diff options
Diffstat (limited to 'drivers/infiniband/hw/ipath/ipath_file_ops.c')
| -rw-r--r-- | drivers/infiniband/hw/ipath/ipath_file_ops.c | 1914 |
1 files changed, 1914 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c new file mode 100644 index 000000000000..ada267e41f6c --- /dev/null +++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c @@ -0,0 +1,1914 @@ +/* + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/pci.h> +#include <linux/poll.h> +#include <linux/cdev.h> +#include <linux/swap.h> +#include <linux/vmalloc.h> +#include <asm/pgtable.h> + +#include "ipath_kernel.h" +#include "ips_common.h" +#include "ipath_layer.h" + +static int ipath_open(struct inode *, struct file *); +static int ipath_close(struct inode *, struct file *); +static ssize_t ipath_write(struct file *, const char __user *, size_t, + loff_t *); +static unsigned int ipath_poll(struct file *, struct poll_table_struct *); +static int ipath_mmap(struct file *, struct vm_area_struct *); + +static struct file_operations ipath_file_ops = { + .owner = THIS_MODULE, + .write = ipath_write, + .open = ipath_open, + .release = ipath_close, + .poll = ipath_poll, + .mmap = ipath_mmap +}; + +static int ipath_get_base_info(struct ipath_portdata *pd, + void __user *ubase, size_t ubase_size) +{ + int ret = 0; + struct ipath_base_info *kinfo = NULL; + struct ipath_devdata *dd = pd->port_dd; + + if (ubase_size < sizeof(*kinfo)) { + ipath_cdbg(PROC, + "Base size %lu, need %lu (version mismatch?)\n", + (unsigned long) ubase_size, + (unsigned long) sizeof(*kinfo)); + ret = -EINVAL; + goto bail; + } + + kinfo = kzalloc(sizeof(*kinfo), GFP_KERNEL); + if (kinfo == NULL) { + ret = -ENOMEM; + goto bail; + } + + ret = dd->ipath_f_get_base_info(pd, kinfo); + if (ret < 0) + goto bail; + + kinfo->spi_rcvhdr_cnt = dd->ipath_rcvhdrcnt; + kinfo->spi_rcvhdrent_size = dd->ipath_rcvhdrentsize; + kinfo->spi_tidegrcnt = dd->ipath_rcvegrcnt; + kinfo->spi_rcv_egrbufsize = dd->ipath_rcvegrbufsize; + /* + * have to mmap whole thing + */ + kinfo->spi_rcv_egrbuftotlen = + pd->port_rcvegrbuf_chunks * pd->port_rcvegrbuf_size; + kinfo->spi_rcv_egrperchunk = pd->port_rcvegrbufs_perchunk; + kinfo->spi_rcv_egrchunksize = kinfo->spi_rcv_egrbuftotlen / + pd->port_rcvegrbuf_chunks; + kinfo->spi_tidcnt = dd->ipath_rcvtidcnt; + /* + * for this use, may be ipath_cfgports summed over all chips that + * are are configured and present + */ + kinfo->spi_nports = dd->ipath_cfgports; + /* unit (chip/board) our port is on */ + kinfo->spi_unit = dd->ipath_unit; + /* for now, only a single page */ + kinfo->spi_tid_maxsize = PAGE_SIZE; + + /* + * Doing this per port, and based on the skip value, etc. This has + * to be the actual buffer size, since the protocol code treats it + * as an array. + * + * These have to be set to user addresses in the user code via mmap. + * These values are used on return to user code for the mmap target + * addresses only. For 32 bit, same 44 bit address problem, so use + * the physical address, not virtual. Before 2.6.11, using the + * page_address() macro worked, but in 2.6.11, even that returns the + * full 64 bit address (upper bits all 1's). So far, using the + * physical addresses (or chip offsets, for chip mapping) works, but + * no doubt some future kernel release will chang that, and we'll be + * on to yet another method of dealing with this + */ + kinfo->spi_rcvhdr_base = (u64) pd->port_rcvhdrq_phys; + kinfo->spi_rcv_egrbufs = (u64) pd->port_rcvegr_phys; + kinfo->spi_pioavailaddr = (u64) dd->ipath_pioavailregs_phys; + kinfo->spi_status = (u64) kinfo->spi_pioavailaddr + + (void *) dd->ipath_statusp - + (void *) dd->ipath_pioavailregs_dma; + kinfo->spi_piobufbase = (u64) pd->port_piobufs; + kinfo->__spi_uregbase = + dd->ipath_uregbase + dd->ipath_palign * pd->port_port; + + kinfo->spi_pioindex = dd->ipath_pbufsport * (pd->port_port - 1); + kinfo->spi_piocnt = dd->ipath_pbufsport; + kinfo->spi_pioalign = dd->ipath_palign; + + kinfo->spi_qpair = IPATH_KD_QP; + kinfo->spi_piosize = dd->ipath_ibmaxlen; + kinfo->spi_mtu = dd->ipath_ibmaxlen; /* maxlen, not ibmtu */ + kinfo->spi_port = pd->port_port; + kinfo->spi_sw_version = IPATH_KERN_SWVERSION; + kinfo->spi_hw_version = dd->ipath_revision; + + if (copy_to_user(ubase, kinfo, sizeof(*kinfo))) + ret = -EFAULT; + +bail: + kfree(kinfo); + return ret; +} + +/** + * ipath_tid_update - update a port TID + * @pd: the port + * @ti: the TID information + * + * The new implementation as of Oct 2004 is that the driver assigns + * the tid and returns it to the caller. To make it easier to + * catch bugs, and to reduce search time, we keep a cursor for + * each port, walking the shadow tid array to find one that's not + * in use. + * + * For now, if we can't allocate the full list, we fail, although + * in the long run, we'll allocate as many as we can, and the + * caller will deal with that by trying the remaining pages later. + * That means that when we fail, we have to mark the tids as not in + * use again, in our shadow copy. + * + * It's up to the caller to free the tids when they are done. + * We'll unlock the pages as they free them. + * + * Also, right now we are locking one page at a time, but since + * the intended use of this routine is for a single group of + * virtually contiguous pages, that should change to improve + * performance. + */ +static int ipath_tid_update(struct ipath_portdata *pd, + const struct ipath_tid_info *ti) +{ + int ret = 0, ntids; + u32 tid, porttid, cnt, i, tidcnt; + u16 *tidlist; + struct ipath_devdata *dd = pd->port_dd; + u64 physaddr; + unsigned long vaddr; + u64 __iomem *tidbase; + unsigned long tidmap[8]; + struct page **pagep = NULL; + + if (!dd->ipath_pageshadow) { + ret = -ENOMEM; + goto done; + } + + cnt = ti->tidcnt; + if (!cnt) { + ipath_dbg("After copyin, tidcnt 0, tidlist %llx\n", + (unsigned long long) ti->tidlist); + /* + * Should we treat as success? likely a bug + */ + ret = -EFAULT; + goto done; + } + tidcnt = dd->ipath_rcvtidcnt; + if (cnt >= tidcnt) { + /* make sure it all fits in port_tid_pg_list */ + dev_info(&dd->pcidev->dev, "Process tried to allocate %u " + "TIDs, only trying max (%u)\n", cnt, tidcnt); + cnt = tidcnt; + } + pagep = (struct page **)pd->port_tid_pg_list; + tidlist = (u16 *) (&pagep[cnt]); + + memset(tidmap, 0, sizeof(tidmap)); + tid = pd->port_tidcursor; + /* before decrement; chip actual # */ + porttid = pd->port_port * tidcnt; + ntids = tidcnt; + tidbase = (u64 __iomem *) (((char __iomem *) dd->ipath_kregbase) + + dd->ipath_rcvtidbase + + porttid * sizeof(*tidbase)); + + ipath_cdbg(VERBOSE, "Port%u %u tids, cursor %u, tidbase %p\n", + pd->port_port, cnt, tid, tidbase); + + /* virtual address of first page in transfer */ + vaddr = ti->tidvaddr; + if (!access_ok(VERIFY_WRITE, (void __user *) vaddr, + cnt * PAGE_SIZE)) { + ipath_dbg("Fail vaddr %p, %u pages, !access_ok\n", + (void *)vaddr, cnt); + ret = -EFAULT; + goto done; + } + ret = ipath_get_user_pages(vaddr, cnt, pagep); + if (ret) { + if (ret == -EBUSY) { + ipath_dbg("Failed to lock addr %p, %u pages " + "(already locked)\n", + (void *) vaddr, cnt); + /* + * for now, continue, and see what happens but with + * the new implementation, this should never happen, + * unless perhaps the user has mpin'ed the pages + * themselves (something we need to test) + */ + ret = 0; + } else { + dev_info(&dd->pcidev->dev, + "Failed to lock addr %p, %u pages: " + "errno %d\n", (void *) vaddr, cnt, -ret); + goto done; + } + } + for (i = 0; i < cnt; i++, vaddr += PAGE_SIZE) { + for (; ntids--; tid++) { + if (tid == tidcnt) + tid = 0; + if (!dd->ipath_pageshadow[porttid + tid]) + break; + } + if (ntids < 0) { + /* + * oops, wrapped all the way through their TIDs, + * and didn't have enough free; see comments at + * start of routine + */ + ipath_dbg("Not enough free TIDs for %u pages " + "(index %d), failing\n", cnt, i); + i--; /* last tidlist[i] not filled in */ + ret = -ENOMEM; + break; + } + tidlist[i] = tid; + ipath_cdbg(VERBOSE, "Updating idx %u to TID %u, " + "vaddr %lx\n", i, tid, vaddr); + /* we "know" system pages and TID pages are same size */ + dd->ipath_pageshadow[porttid + tid] = pagep[i]; + /* + * don't need atomic or it's overhead + */ + __set_bit(tid, tidmap); + physaddr = page_to_phys(pagep[i]); + ipath_stats.sps_pagelocks++; + ipath_cdbg(VERBOSE, + "TID %u, vaddr %lx, physaddr %llx pgp %p\n", + tid, vaddr, (unsigned long long) physaddr, + pagep[i]); + dd->ipath_f_put_tid(dd, &tidbase[tid], 1, physaddr); + /* + * don't check this tid in ipath_portshadow, since we + * just filled it in; start with the next one. + */ + tid++; + } + + if (ret) { + u32 limit; + cleanup: + /* jump here if copy out of updated info failed... */ + ipath_dbg("After failure (ret=%d), undo %d of %d entries\n", + -ret, i, cnt); + /* same code that's in ipath_free_tid() */ + limit = sizeof(tidmap) * BITS_PER_BYTE; + if (limit > tidcnt) + /* just in case size changes in future */ + limit = tidcnt; + tid = find_first_bit((const unsigned long *)tidmap, limit); + for (; tid < limit; tid++) { + if (!test_bit(tid, tidmap)) + continue; + if (dd->ipath_pageshadow[porttid + tid]) { + ipath_cdbg(VERBOSE, "Freeing TID %u\n", + tid); + dd->ipath_f_put_tid(dd, &tidbase[tid], 1, + dd->ipath_tidinvalid); + dd->ipath_pageshadow[porttid + tid] = NULL; + ipath_stats.sps_pageunlocks++; + } + } + ipath_release_user_pages(pagep, cnt); + } else { + /* + * Copy the updated array, with ipath_tid's filled in, back + * to user. Since we did the copy in already, this "should + * never fail" If it does, we have to clean up... + */ + if (copy_to_user((void __user *) + (unsigned long) ti->tidlist, + tidlist, cnt * sizeof(*tidlist))) { + ret = -EFAULT; + goto cleanup; + } + if (copy_to_user((void __user *) (unsigned long) ti->tidmap, + tidmap, sizeof tidmap)) { + ret = -EFAULT; + goto cleanup; + } + if (tid == tidcnt) + tid = 0; + pd->port_tidcursor = tid; + } + +done: + if (ret) + ipath_dbg("Failed to map %u TID pages, failing with %d\n", + ti->tidcnt, -ret); + return ret; +} + +/** + * ipath_tid_free - free a port TID + * @pd: the port + * @ti: the TID info + * + * right now we are unlocking one page at a time, but since + * the intended use of this routine is for a single group of + * virtually contiguous pages, that should change to improve + * performance. We check that the TID is in range for this port + * but otherwise don't check validity; if user has an error and + * frees the wrong tid, it's only their own data that can thereby + * be corrupted. We do check that the TID was in use, for sanity + * We always use our idea of the saved address, not the address that + * they pass in to us. + */ + +static int ipath_tid_free(struct ipath_portdata *pd, + const struct ipath_tid_info *ti) +{ + int ret = 0; + u32 tid, porttid, cnt, limit, tidcnt; + struct ipath_devdata *dd = pd->port_dd; + u64 __iomem *tidbase; + unsigned long tidmap[8]; + + if (!dd->ipath_pageshadow) { + ret = -ENOMEM; + goto done; + } + + if (copy_from_user(tidmap, (void __user *)(unsigned long)ti->tidmap, + sizeof tidmap)) { + ret = -EFAULT; + goto done; + } + + porttid = pd->port_port * dd->ipath_rcvtidcnt; + tidbase = (u64 __iomem *) ((char __iomem *)(dd->ipath_kregbase) + + dd->ipath_rcvtidbase + + porttid * sizeof(*tidbase)); + + tidcnt = dd->ipath_rcvtidcnt; + limit = sizeof(tidmap) * BITS_PER_BYTE; + if (limit > tidcnt) + /* just in case size changes in future */ + limit = tidcnt; + tid = find_first_bit(tidmap, limit); + ipath_cdbg(VERBOSE, "Port%u free %u tids; first bit (max=%d) " + "set is %d, porttid %u\n", pd->port_port, ti->tidcnt, + limit, tid, porttid); + for (cnt = 0; tid < limit; tid++) { + /* + * small optimization; if we detect a run of 3 or so without + * any set, use find_first_bit again. That's mainly to + * accelerate the case where we wrapped, so we have some at + * the beginning, and some at the end, and a big gap + * in the middle. + */ + if (!test_bit(tid, tidmap)) + continue; + cnt++; + if (dd->ipath_pageshadow[porttid + tid]) { + ipath_cdbg(VERBOSE, "PID %u freeing TID %u\n", + pd->port_pid, tid); + dd->ipath_f_put_tid(dd, &tidbase[tid], 1, + dd->ipath_tidinvalid); + ipath_release_user_pages( + &dd->ipath_pageshadow[porttid + tid], 1); + dd->ipath_pageshadow[porttid + tid] = NULL; + ipath_stats.sps_pageunlocks++; + } else + ipath_dbg("Unused tid %u, ignoring\n", tid); + } + if (cnt != ti->tidcnt) + ipath_dbg("passed in tidcnt %d, only %d bits set in map\n", + ti->tidcnt, cnt); +done: + if (ret) + ipath_dbg("Failed to unmap %u TID pages, failing with %d\n", + ti->tidcnt, -ret); + return ret; +} + +/** + * ipath_set_part_key - set a partition key + * @pd: the port + * @key: the key + * + * We can have up to 4 active at a time (other than the default, which is + * always allowed). This is somewhat tricky, since multiple ports may set + * the same key, so we reference count them, and clean up at exit. All 4 + * partition keys are packed into a single infinipath register. It's an + * error for a process to set the same pkey multiple times. We provide no + * mechanism to de-allocate a pkey at this time, we may eventually need to + * do that. I've used the atomic operations, and no locking, and only make + * a single pass through what's available. This should be more than + * adequate for some time. I'll think about spinlocks or the like if and as + * it's necessary. + */ +static int ipath_set_part_key(struct ipath_portdata *pd, u16 key) +{ + struct ipath_devdata *dd = pd->port_dd; + int i, any = 0, pidx = -1; + u16 lkey = key & 0x7FFF; + int ret; + + if (lkey == (IPS_DEFAULT_P_KEY & 0x7FFF)) { + /* nothing to do; this key always valid */ + ret = 0; + goto bail; + } + + ipath_cdbg(VERBOSE, "p%u try to set pkey %hx, current keys " + "%hx:%x %hx:%x %hx:%x %hx:%x\n", + pd->port_port, key, dd->ipath_pkeys[0], + atomic_read(&dd->ipath_pkeyrefs[0]), dd->ipath_pkeys[1], + atomic_read(&dd->ipath_pkeyrefs[1]), dd->ipath_pkeys[2], + atomic_read(&dd->ipath_pkeyrefs[2]), dd->ipath_pkeys[3], + atomic_read(&dd->ipath_pkeyrefs[3])); + + if (!lkey) { + ipath_cdbg(PROC, "p%u tries to set key 0, not allowed\n", + pd->port_port); + ret = -EINVAL; + goto bail; + } + + /* + * Set the full membership bit, because it has to be + * set in the register or the packet, and it seems + * cleaner to set in the register than to force all + * callers to set it. (see bug 4331) + */ + key |= 0x8000; + + for (i = 0; i < ARRAY_SIZE(pd->port_pkeys); i++) { + if (!pd->port_pkeys[i] && pidx == -1) + pidx = i; + if (pd->port_pkeys[i] == key) { + ipath_cdbg(VERBOSE, "p%u tries to set same pkey " + "(%x) more than once\n", + pd->port_port, key); + ret = -EEXIST; + goto bail; + } + } + if (pidx == -1) { + ipath_dbg("All pkeys for port %u already in use, " + "can't set %x\n", pd->port_port, key); + ret = -EBUSY; + goto bail; + } + for (any = i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) { + if (!dd->ipath_pkeys[i]) { + any++; + continue; + } + if (dd->ipath_pkeys[i] == key) { + atomic_t *pkrefs = &dd->ipath_pkeyrefs[i]; + + if (atomic_inc_return(pkrefs) > 1) { + pd->port_pkeys[pidx] = key; + ipath_cdbg(VERBOSE, "p%u set key %x " + "matches #%d, count now %d\n", + pd->port_port, key, i, + atomic_read(pkrefs)); + ret = 0; + goto bail; + } else { + /* + * lost race, decrement count, catch below + */ + atomic_dec(pkrefs); + ipath_cdbg(VERBOSE, "Lost race, count was " + "0, after dec, it's %d\n", + atomic_read(pkrefs)); + any++; + } + } + if ((dd->ipath_pkeys[i] & 0x7FFF) == lkey) { + /* + * It makes no sense to have both the limited and + * full membership PKEY set at the same time since + * the unlimited one will disable the limited one. + */ + ret = -EEXIST; + goto bail; + } + } + if (!any) { + ipath_dbg("port %u, all pkeys already in use, " + "can't set %x\n", pd->port_port, key); + ret = -EBUSY; + goto bail; + } + for (any = i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) { + if (!dd->ipath_pkeys[i] && + atomic_inc_return(&dd->ipath_pkeyrefs[i]) == 1) { + u64 pkey; + + /* for ipathstats, etc. */ + ipath_stats.sps_pkeys[i] = lkey; + pd->port_pkeys[pidx] = dd->ipath_pkeys[i] = key; + pkey = + (u64) dd->ipath_pkeys[0] | + ((u64) dd->ipath_pkeys[1] << 16) | + ((u64) dd->ipath_pkeys[2] << 32) | + ((u64) dd->ipath_pkeys[3] << 48); + ipath_cdbg(PROC, "p%u set key %x in #%d, " + "portidx %d, new pkey reg %llx\n", + pd->port_port, key, i, pidx, + (unsigned long long) pkey); + ipath_write_kreg( + dd, dd->ipath_kregs->kr_partitionkey, pkey); + + ret = 0; + goto bail; + } + } + ipath_dbg("port %u, all pkeys already in use 2nd pass, " + "can't set %x\n", pd->port_port, key); + ret = -EBUSY; + +bail: + return ret; +} + +/** + * ipath_manage_rcvq - manage a port's receive queue + * @pd: the port + * @start_stop: action to carry out + * + * start_stop == 0 disables receive on the port, for use in queue + * overflow conditions. start_stop==1 re-enables, to be used to + * re-init the software copy of the head register + */ +static int ipath_manage_rcvq(struct ipath_portdata *pd, int start_stop) +{ + struct ipath_devdata *dd = pd->port_dd; + u64 tval; + + ipath_cdbg(PROC, "%sabling rcv for unit %u port %u\n", + start_stop ? "en" : "dis", dd->ipath_unit, + pd->port_port); + /* atomically clear receive enable port. */ + if (start_stop) { + /* + * On enable, force in-memory copy of the tail register to + * 0, so that protocol code doesn't have to worry about + * whether or not the chip has yet updated the in-memory + * copy or not on return from the system call. The chip + * always resets it's tail register back to 0 on a + * transition from disabled to enabled. This could cause a + * problem if software was broken, and did the enable w/o + * the disable, but eventually the in-memory copy will be + * updated and correct itself, even in the face of software + * bugs. + */ + *pd->port_rcvhdrtail_kvaddr = 0; + set_bit(INFINIPATH_R_PORTENABLE_SHIFT + pd->port_port, + &dd->ipath_rcvctrl); + } else + clear_bit(INFINIPATH_R_PORTENABLE_SHIFT + pd->port_port, + &dd->ipath_rcvctrl); + ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, + dd->ipath_rcvctrl); + /* now be sure chip saw it before we return */ + tval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); + if (start_stop) { + /* + * And try to be sure that tail reg update has happened too. + * This should in theory interlock with the RXE changes to + * the tail register. Don't assign it to the tail register + * in memory copy, since we could overwrite an update by the + * chip if we did. + */ + tval = ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port); + } + /* always; new head should be equal to new tail; see above */ + return 0; +} + +static void ipath_clean_part_key(struct ipath_portdata *pd, + struct ipath_devdata *dd) +{ + int i, j, pchanged = 0; + u64 oldpkey; + + /* for debugging only */ + oldpkey = (u64) dd->ipath_pkeys[0] | + ((u64) dd->ipath_pkeys[1] << 16) | + ((u64) dd->ipath_pkeys[2] << 32) | + ((u64) dd->ipath_pkeys[3] << 48); + + for (i = 0; i < ARRAY_SIZE(pd->port_pkeys); i++) { + if (!pd->port_pkeys[i]) + continue; + ipath_cdbg(VERBOSE, "look for key[%d] %hx in pkeys\n", i, + pd->port_pkeys[i]); + for (j = 0; j < ARRAY_SIZE(dd->ipath_pkeys); j++) { + /* check for match independent of the global bit */ + if ((dd->ipath_pkeys[j] & 0x7fff) != + (pd->port_pkeys[i] & 0x7fff)) + continue; + if (atomic_dec_and_test(&dd->ipath_pkeyrefs[j])) { + ipath_cdbg(VERBOSE, "p%u clear key " + "%x matches #%d\n", + pd->port_port, + pd->port_pkeys[i], j); + ipath_stats.sps_pkeys[j] = + dd->ipath_pkeys[j] = 0; + pchanged++; + } + else ipath_cdbg( + VERBOSE, "p%u key %x matches #%d, " + "but ref still %d\n", pd->port_port, + pd->port_pkeys[i], j, + atomic_read(&dd->ipath_pkeyrefs[j])); + break; + } + pd->port_pkeys[i] = 0; + } + if (pchanged) { + u64 pkey = (u64) dd->ipath_pkeys[0] | + ((u64) dd->ipath_pkeys[1] << 16) | + ((u64) dd->ipath_pkeys[2] << 32) | + ((u64) dd->ipath_pkeys[3] << 48); + ipath_cdbg(VERBOSE, "p%u old pkey reg %llx, " + "new pkey reg %llx\n", pd->port_port, + (unsigned long long) oldpkey, + (unsigned long long) pkey); + ipath_write_kreg(dd, dd->ipath_kregs->kr_partitionkey, + pkey); + } +} + +/** + * ipath_create_user_egr - allocate eager TID buffers + * @pd: the port to allocate TID buffers for + * + * This routine is now quite different for user and kernel, because + * the kernel uses skb's, for the accelerated network performance + * This is the user port version + * + * Allocate the eager TID buffers and program them into infinipath + * They are no longer completely contiguous, we do multiple allocation + * calls. + */ +static int ipath_create_user_egr(struct ipath_portdata *pd) +{ + struct ipath_devdata *dd = pd->port_dd; + unsigned e, egrcnt, alloced, egrperchunk, chunk, egrsize, egroff; + size_t size; + int ret; + + egrcnt = dd->ipath_rcvegrcnt; + /* TID number offset for this port */ + egroff = pd->port_port * egrcnt; + egrsize = dd->ipath_rcvegrbufsize; + ipath_cdbg(VERBOSE, "Allocating %d egr buffers, at egrtid " + "offset %x, egrsize %u\n", egrcnt, egroff, egrsize); + + /* + * to avoid wasting a lot of memory, we allocate 32KB chunks of + * physically contiguous memory, advance through it until used up + * and then allocate more. Of course, we need memory to store those + * extra pointers, now. Started out with 256KB, but under heavy + * memory pressure (creating large files and then copying them over + * NFS while doing lots of MPI jobs), we hit some allocation + * failures, even though we can sleep... (2.6.10) Still get + * failures at 64K. 32K is the lowest we can go without waiting + * more memory again. It seems likely that the coalescing in + * free_pages, etc. still has issues (as it has had previously + * during 2.6.x development). + */ + size = 0x8000; + alloced = ALIGN(egrsize * egrcnt, size); + egrperchunk = size / egrsize; + chunk = (egrcnt + egrperchunk - 1) / egrperchunk; + pd->port_rcvegrbuf_chunks = chunk; + pd->port_rcvegrbufs_perchunk = egrperchunk; + pd->port_rcvegrbuf_size = size; + pd->port_rcvegrbuf = vmalloc(chunk * sizeof(pd->port_rcvegrbuf[0])); + if (!pd->port_rcvegrbuf) { + ret = -ENOMEM; + goto bail; + } + pd->port_rcvegrbuf_phys = + vmalloc(chunk * sizeof(pd->port_rcvegrbuf_phys[0])); + if (!pd->port_rcvegrbuf_phys) { + ret = -ENOMEM; + goto bail_rcvegrbuf; + } + for (e = 0; e < pd->port_rcvegrbuf_chunks; e++) { + /* + * GFP_USER, but without GFP_FS, so buffer cache can be + * coalesced (we hope); otherwise, even at order 4, + * heavy filesystem activity makes these fail + */ + gfp_t gfp_flags = __GFP_WAIT | __GFP_IO | __GFP_COMP; + + pd->port_rcvegrbuf[e] = dma_alloc_coherent( + &dd->pcidev->dev, size, &pd->port_rcvegrbuf_phys[e], + gfp_flags); + + if (!pd->port_rcvegrbuf[e]) { + ret = -ENOMEM; + goto bail_rcvegrbuf_phys; + } + } + + pd->port_rcvegr_phys = pd->port_rcvegrbuf_phys[0]; + + for (e = chunk = 0; chunk < pd->port_rcvegrbuf_chunks; chunk++) { + dma_addr_t pa = pd->port_rcvegrbuf_phys[chunk]; + unsigned i; + + for (i = 0; e < egrcnt && i < egrperchunk; e++, i++) { + dd->ipath_f_put_tid(dd, e + egroff + + (u64 __iomem *) + ((char __iomem *) + dd->ipath_kregbase + + dd->ipath_rcvegrbase), 0, pa); + pa += egrsize; + } + cond_resched(); /* don't hog the cpu */ + } + + ret = 0; + goto bail; + +bail_rcvegrbuf_phys: + for (e = 0; e < pd->port_rcvegrbuf_chunks && + pd->port_rcvegrbuf[e]; e++) + dma_free_coherent(&dd->pcidev->dev, size, + pd->port_rcvegrbuf[e], + pd->port_rcvegrbuf_phys[e]); + + vfree(pd->port_rcvegrbuf_phys); + pd->port_rcvegrbuf_phys = NULL; +bail_rcvegrbuf: + vfree(pd->port_rcvegrbuf); + pd->port_rcvegrbuf = NULL; +bail: + return ret; +} + +static int ipath_do_user_init(struct ipath_portdata *pd, + const struct ipath_user_info *uinfo) +{ + int ret = 0; + struct ipath_devdata *dd = pd->port_dd; + u64 physaddr, uaddr, off, atmp; + struct page *pagep; + u32 head32; + u64 head; + + /* for now, if major version is different, bail */ + if ((uinfo->spu_userversion >> 16) != IPATH_USER_SWMAJOR) { + dev_info(&dd->pcidev->dev, + "User major version %d not same as driver " + "major %d\n", uinfo->spu_userversion >> 16, + IPATH_USER_SWMAJOR); + ret = -ENODEV; + goto done; + } + + if ((uinfo->spu_userversion & 0xffff) != IPATH_USER_SWMINOR) + ipath_dbg("User minor version %d not same as driver " + "minor %d\n", uinfo->spu_userversion & 0xffff, + IPATH_USER_SWMINOR); + + if (uinfo->spu_rcvhdrsize) { + ret = ipath_setrcvhdrsize(dd, uinfo->spu_rcvhdrsize); + if (ret) + goto done; + } + + /* for now we do nothing with rcvhdrcnt: uinfo->spu_rcvhdrcnt */ + + /* set up for the rcvhdr Q tail register writeback to user memory */ + if (!uinfo->spu_rcvhdraddr || + !access_ok(VERIFY_WRITE, (u64 __user *) (unsigned long) + uinfo->spu_rcvhdraddr, sizeof(u64))) { + ipath_dbg("Port %d rcvhdrtail addr %llx not valid\n", + pd->port_port, + (unsigned long long) uinfo->spu_rcvhdraddr); + ret = -EINVAL; + goto done; + } + + off = offset_in_page(uinfo->spu_rcvhdraddr); + uaddr = PAGE_MASK & (unsigned long) uinfo->spu_rcvhdraddr; + ret = ipath_get_user_pages_nocopy(uaddr, &pagep); + if (ret) { + dev_info(&dd->pcidev->dev, "Failed to lookup and lock " + "address %llx for rcvhdrtail: errno %d\n", + (unsigned long long) uinfo->spu_rcvhdraddr, -ret); + goto done; + } + ipath_stats.sps_pagelocks++; + pd->port_rcvhdrtail_uaddr = uaddr; + pd->port_rcvhdrtail_pagep = pagep; + pd->port_rcvhdrtail_kvaddr = + page_address(pagep); + pd->port_rcvhdrtail_kvaddr += off; + physaddr = page_to_phys(pagep) + off; + ipath_cdbg(VERBOSE, "port %d user addr %llx hdrtailaddr, %llx " + "physical (off=%llx)\n", + pd->port_port, + (unsigned long long) uinfo->spu_rcvhdraddr, + (unsigned long long) physaddr, (unsigned long long) off); + ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdrtailaddr, + pd->port_port, physaddr); + atmp = ipath_read_kreg64_port(dd, + dd->ipath_kregs->kr_rcvhdrtailaddr, + pd->port_port); + if (physaddr != atmp) { + ipath_dev_err(dd, + "Catastrophic software error, " + "RcvHdrTailAddr%u written as %llx, " + "read back as %llx\n", pd->port_port, + (unsigned long long) physaddr, + (unsigned long long) atmp); + ret = -EINVAL; + goto done; + } + + /* for right now, kernel piobufs are at end, so port 1 is at 0 */ + pd->port_piobufs = dd->ipath_piobufbase + + dd->ipath_pbufsport * (pd->port_port - + 1) * dd->ipath_palign; + ipath_cdbg(VERBOSE, "Set base of piobufs for port %u to 0x%x\n", + pd->port_port, pd->port_piobufs); + + /* + * Now allocate the rcvhdr Q and eager TIDs; skip the TID + * array for time being. If pd->port_port > chip-supported, + * we need to do extra stuff here to handle by handling overflow + * through port 0, someday + */ + ret = ipath_create_rcvhdrq(dd, pd); + if (!ret) + ret = ipath_create_user_egr(pd); + if (ret) + goto done; + /* enable receives now */ + /* atomically set enable bit for this port */ + set_bit(INFINIPATH_R_PORTENABLE_SHIFT + pd->port_port, + &dd->ipath_rcvctrl); + + /* + * set the head registers for this port to the current values + * of the tail pointers, since we don't know if they were + * updated on last use of the port. + */ + head32 = ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port); + head = (u64) head32; + ipath_write_ureg(dd, ur_rcvhdrhead, head, pd->port_port); + head32 = ipath_read_ureg32(dd, ur_rcvegrindextail, pd->port_port); + ipath_write_ureg(dd, ur_rcvegrindexhead, head32, pd->port_port); + dd->ipath_lastegrheads[pd->port_port] = -1; + dd->ipath_lastrcvhdrqtails[pd->port_port] = -1; + ipath_cdbg(VERBOSE, "Wrote port%d head %llx, egrhead %x from " + "tail regs\n", pd->port_port, + (unsigned long long) head, head32); + pd->port_tidcursor = 0; /* start at beginning after open */ + /* + * now enable the port; the tail registers will be written to memory + * by the chip as soon as it sees the write to + * dd->ipath_kregs->kr_rcvctrl. The update only happens on + * transition from 0 to 1, so clear it first, then set it as part of + * enabling the port. This will (very briefly) affect any other + * open ports, but it shouldn't be long enough to be an issue. + */ + ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, + dd->ipath_rcvctrl & ~INFINIPATH_R_TAILUPD); + ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, + dd->ipath_rcvctrl); + +done: + return ret; +} + +static int mmap_ureg(struct vm_area_struct *vma, struct ipath_devdata *dd, + u64 ureg) +{ + unsigned long phys; + int ret; + + /* it's the real hardware, so io_remap works */ + + if ((vma->vm_end - vma->vm_start) > PAGE_SIZE) { + dev_info(&dd->pcidev->dev, "FAIL mmap userreg: reqlen " + "%lx > PAGE\n", vma->vm_end - vma->vm_start); + ret = -EFAULT; + } else { + phys = dd->ipath_physaddr + ureg; + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND; + ret = io_remap_pfn_range(vma, vma->vm_start, + phys >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, + vma->vm_page_prot); + } + return ret; +} + +static int mmap_piobufs(struct vm_area_struct *vma, + struct ipath_devdata *dd, + struct ipath_portdata *pd) +{ + unsigned long phys; + int ret; + + /* + * When we map the PIO buffers, we want to map them as writeonly, no + * read possible. + */ + + if ((vma->vm_end - vma->vm_start) > + (dd->ipath_pbufsport * dd->ipath_palign)) { + dev_info(&dd->pcidev->dev, "FAIL mmap piobufs: " + "reqlen %lx > PAGE\n", + vma->vm_end - vma->vm_start); + ret = -EFAULT; + goto bail; + } + + phys = dd->ipath_physaddr + pd->port_piobufs; + /* + * Do *NOT* mark this as non-cached (PWT bit), or we don't get the + * write combining behavior we want on the PIO buffers! + * vma->vm_page_prot = + * pgprot_noncached(vma->vm_page_prot); + */ + + if (vma->vm_flags & VM_READ) { + dev_info(&dd->pcidev->dev, + "Can't map piobufs as readable (flags=%lx)\n", + vma->vm_flags); + ret = -EPERM; + goto bail; + } + + /* don't allow them to later change to readable with mprotect */ + + vma->vm_flags &= ~VM_MAYWRITE; + vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND; + + ret = io_remap_pfn_range(vma, vma->vm_start, phys >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, + vma->vm_page_prot); +bail: + return ret; +} + +static int mmap_rcvegrbufs(struct vm_area_struct *vma, + struct ipath_portdata *pd) +{ + struct ipath_devdata *dd = pd->port_dd; + unsigned long start, size; + size_t total_size, i; + dma_addr_t *phys; + int ret; + + if (!pd->port_rcvegrbuf) { + ret = -EFAULT; + goto bail; + } + + size = pd->port_rcvegrbuf_size; + total_size = pd->port_rcvegrbuf_chunks * size; + if ((vma->vm_end - vma->vm_start) > total_size) { + dev_info(&dd->pcidev->dev, "FAIL on egr bufs: " + "reqlen %lx > actual %lx\n", + vma->vm_end - vma->vm_start, + (unsigned long) total_size); + ret = -EFAULT; + goto bail; + } + + if (vma->vm_flags & VM_WRITE) { + dev_info(&dd->pcidev->dev, "Can't map eager buffers as " + "writable (flags=%lx)\n", vma->vm_flags); + ret = -EPERM; + goto bail; + } + + start = vma->vm_start; + phys = pd->port_rcvegrbuf_phys; + + /* don't allow them to later change to writeable with mprotect */ + vma->vm_flags &= ~VM_MAYWRITE; + + for (i = 0; i < pd->port_rcvegrbuf_chunks; i++, start += size) { + ret = remap_pfn_range(vma, start, phys[i] >> PAGE_SHIFT, + size, vma->vm_page_prot); + if (ret < 0) + goto bail; + } + ret = 0; + +bail: + return ret; +} + +static int mmap_rcvhdrq(struct vm_area_struct *vma, + struct ipath_portdata *pd) +{ + struct ipath_devdata *dd = pd->port_dd; + size_t total_size; + int ret; + + /* + * kmalloc'ed memory, physically contiguous; this is from + * spi_rcvhdr_base; we allow user to map read-write so they can + * write hdrq entries to allow protocol code to directly poll + * whether a hdrq entry has been written. + */ + total_size = ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize * + sizeof(u32), PAGE_SIZE); + if ((vma->vm_end - vma->vm_start) > total_size) { + dev_info(&dd->pcidev->dev, + "FAIL on rcvhdrq: reqlen %lx > actual %lx\n", + vma->vm_end - vma->vm_start, + (unsigned long) total_size); + ret = -EFAULT; + goto bail; + } + + ret = remap_pfn_range(vma, vma->vm_start, + pd->port_rcvhdrq_phys >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, + vma->vm_page_prot); +bail: + return ret; +} + +static int mmap_pioavailregs(struct vm_area_struct *vma, + struct ipath_portdata *pd) +{ + struct ipath_devdata *dd = pd->port_dd; + int ret; + + /* + * when we map the PIO bufferavail registers, we want to map them as + * readonly, no write possible. + * + * kmalloc'ed memory, physically contiguous, one page only, readonly + */ + + if ((vma->vm_end - vma->vm_start) > PAGE_SIZE) { + dev_info(&dd->pcidev->dev, "FAIL on pioavailregs_dma: " + "reqlen %lx > actual %lx\n", + vma->vm_end - vma->vm_start, + (unsigned long) PAGE_SIZE); + ret = -EFAULT; + goto bail; + } + + if (vma->vm_flags & VM_WRITE) { + dev_info(&dd->pcidev->dev, + "Can't map pioavailregs as writable (flags=%lx)\n", + vma->vm_flags); + ret = -EPERM; + goto bail; + } + + /* don't allow them to later change with mprotect */ + vma->vm_flags &= ~VM_MAYWRITE; + + ret = remap_pfn_range(vma, vma->vm_start, + dd->ipath_pioavailregs_phys >> PAGE_SHIFT, + PAGE_SIZE, vma->vm_page_prot); +bail: + return ret; +} + +/** + * ipath_mmap - mmap various structures into user space + * @fp: the file pointer + * @vma: the VM area + * + * We use this to have a shared buffer between the kernel and the user code + * for the rcvhdr queue, egr buffers, and the per-port user regs and pio + * buffers in the chip. We have the open and close entries so we can bump + * the ref count and keep the driver from being unloaded while still mapped. + */ +static int ipath_mmap(struct file *fp, struct vm_area_struct *vma) +{ + struct ipath_portdata *pd; + struct ipath_devdata *dd; + u64 pgaddr, ureg; + int ret; + + pd = port_fp(fp); + dd = pd->port_dd; + /* + * This is the ipath_do_user_init() code, mapping the shared buffers + * into the user process. The address referred to by vm_pgoff is the + * virtual, not physical, address; we only do one mmap for each + * space mapped. + */ + pgaddr = vma->vm_pgoff << PAGE_SHIFT; + + /* + * note that ureg does *NOT* have the kregvirt as part of it, to be + * sure that for 32 bit programs, we don't end up trying to map a > + * 44 address. Has to match ipath_get_base_info() code that sets + * __spi_uregbase + */ + + ureg = dd->ipath_uregbase + dd->ipath_palign * pd->port_port; + + ipath_cdbg(MM, "ushare: pgaddr %llx vm_start=%lx, vmlen %lx\n", + (unsigned long long) pgaddr, vma->vm_start, + vma->vm_end - vma->vm_start); + + if (pgaddr == ureg) + ret = mmap_ureg(vma, dd, ureg); + else if (pgaddr == pd->port_piobufs) + ret = mmap_piobufs(vma, dd, pd); + else if (pgaddr == (u64) pd->port_rcvegr_phys) + ret = mmap_rcvegrbufs(vma, pd); + else if (pgaddr == (u64) pd->port_rcvhdrq_phys) + ret = mmap_rcvhdrq(vma, pd); + else if (pgaddr == dd->ipath_pioavailregs_phys) + ret = mmap_pioavailregs(vma, pd); + else + ret = -EINVAL; + + vma->vm_private_data = NULL; + + if (ret < 0) + dev_info(&dd->pcidev->dev, + "Failure %d on addr %lx, off %lx\n", + -ret, vma->vm_start, vma->vm_pgoff); + + return ret; +} + +static unsigned int ipath_poll(struct file *fp, + struct poll_table_struct *pt) +{ + struct ipath_portdata *pd; + u32 head, tail; + int bit; + struct ipath_devdata *dd; + + pd = port_fp(fp); + dd = pd->port_dd; + + bit = pd->port_port + INFINIPATH_R_INTRAVAIL_SHIFT; + set_bit(bit, &dd->ipath_rcvctrl); + + /* + * Before blocking, make sure that head is still == tail, + * reading from the chip, so we can be sure the interrupt + * enable has made it to the chip. If not equal, disable + * interrupt again and return immediately. This avoids races, + * and the overhead of the chip read doesn't matter much at + * this point, since we are waiting for something anyway. + */ + + ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, + dd->ipath_rcvctrl); + + head = ipath_read_ureg32(dd, ur_rcvhdrhead, pd->port_port); + tail = ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port); + + if (tail == head) { + set_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag); + if(dd->ipath_rhdrhead_intr_off) /* arm rcv interrupt */ + (void)ipath_write_ureg(dd, ur_rcvhdrhead, + dd->ipath_rhdrhead_intr_off + | head, pd->port_port); + poll_wait(fp, &pd->port_wait, pt); + + if (test_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag)) { + /* timed out, no packets received */ + clear_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag); + pd->port_rcvwait_to++; + } + } + else { + /* it's already happened; don't do wait_event overhead */ + pd->port_rcvnowait++; + } + + clear_bit(bit, &dd->ipath_rcvctrl); + ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, + dd->ipath_rcvctrl); + + return 0; +} + +static int try_alloc_port(struct ipath_devdata *dd, int port, + struct file *fp) +{ + int ret; + + if (!dd->ipath_pd[port]) { + void *p, *ptmp; + + p = kzalloc(sizeof(struct ipath_portdata), GFP_KERNEL); + + /* + * Allocate memory for use in ipath_tid_update() just once + * at open, not per call. Reduces cost of expected send + * setup. + */ + ptmp = kmalloc(dd->ipath_rcvtidcnt * sizeof(u16) + + dd->ipath_rcvtidcnt * sizeof(struct page **), + GFP_KERNEL); + if (!p || !ptmp) { + ipath_dev_err(dd, "Unable to allocate portdata " + "memory, failing open\n"); + ret = -ENOMEM; + kfree(p); + kfree(ptmp); + goto bail; + } + dd->ipath_pd[port] = p; + dd->ipath_pd[port]->port_port = port; + dd->ipath_pd[port]->port_dd = dd; + dd->ipath_pd[port]->port_tid_pg_list = ptmp; + init_waitqueue_head(&dd->ipath_pd[port]->port_wait); + } + if (!dd->ipath_pd[port]->port_cnt) { + dd->ipath_pd[port]->port_cnt = 1; + fp->private_data = (void *) dd->ipath_pd[port]; + ipath_cdbg(PROC, "%s[%u] opened unit:port %u:%u\n", + current->comm, current->pid, dd->ipath_unit, + port); + dd->ipath_pd[port]->port_pid = current->pid; + strncpy(dd->ipath_pd[port]->port_comm, current->comm, + sizeof(dd->ipath_pd[port]->port_comm)); + ipath_stats.sps_ports++; + ret = 0; + goto bail; + } + ret = -EBUSY; + +bail: + return ret; +} + +static inline int usable(struct ipath_devdata *dd) +{ + return dd && + (dd->ipath_flags & IPATH_PRESENT) && + dd->ipath_kregbase && + dd->ipath_lid && + !(dd->ipath_flags & (IPATH_LINKDOWN | IPATH_DISABLED + | IPATH_LINKUNK)); +} + +static int find_free_port(int unit, struct file *fp) +{ + struct ipath_devdata *dd = ipath_lookup(unit); + int ret, i; + + if (!dd) { + ret = -ENODEV; + goto bail; + } + + if (!usable(dd)) { + ret = -ENETDOWN; + goto bail; + } + + for (i = 0; i < dd->ipath_cfgports; i++) { + ret = try_alloc_port(dd, i, fp); + if (ret != -EBUSY) + goto bail; + } + ret = -EBUSY; + +bail: + return ret; +} + +static int find_best_unit(struct file *fp) +{ + int ret = 0, i, prefunit = -1, devmax; + int maxofallports, npresent, nup; + int ndev; + + (void) ipath_count_units(&npresent, &nup, &maxofallports); + + /* + * This code is present to allow a knowledgeable person to + * specify the layout of processes to processors before opening + * this driver, and then we'll assign the process to the "closest" + * HT-400 to that processor (we assume reasonable connectivity, + * for now). This code assumes that if affinity has been set + * before this point, that at most one cpu is set; for now this + * is reasonable. I check for both cpus_empty() and cpus_full(), + * in case some kernel variant sets none of the bits when no + * affinity is set. 2.6.11 and 12 kernels have all present + * cpus set. Some day we'll have to fix it up further to handle + * a cpu subset. This algorithm fails for two HT-400's connected + * in tunnel fashion. Eventually this needs real topology + * information. There may be some issues with dual core numbering + * as well. This needs more work prior to release. + */ + if (!cpus_empty(current->cpus_allowed) && + !cpus_full(current->cpus_allowed)) { + int ncpus = num_online_cpus(), curcpu = -1; + for (i = 0; i < ncpus; i++) + if (cpu_isset(i, current->cpus_allowed)) { + ipath_cdbg(PROC, "%s[%u] affinity set for " + "cpu %d\n", current->comm, + current->pid, i); + curcpu = i; + } + if (curcpu != -1) { + if (npresent) { + prefunit = curcpu / (ncpus / npresent); + ipath_dbg("%s[%u] %d chips, %d cpus, " + "%d cpus/chip, select unit %d\n", + current->comm, current->pid, + npresent, ncpus, ncpus / npresent, + prefunit); + } + } + } + + /* + * user ports start at 1, kernel port is 0 + * For now, we do round-robin access across all chips + */ + + if (prefunit != -1) + devmax = prefunit + 1; + else + devmax = ipath_count_units(NULL, NULL, NULL); +recheck: + for (i = 1; i < maxofallports; i++) { + for (ndev = prefunit != -1 ? prefunit : 0; ndev < devmax; + ndev++) { + struct ipath_devdata *dd = ipath_lookup(ndev); + + if (!usable(dd)) + continue; /* can't use this unit */ + if (i >= dd->ipath_cfgports) + /* + * Maxed out on users of this unit. Try + * next. + */ + continue; + ret = try_alloc_port(dd, i, fp); + if (!ret) + goto done; + } + } + + if (npresent) { + if (nup == 0) { + ret = -ENETDOWN; + ipath_dbg("No ports available (none initialized " + "and ready)\n"); + } else { + if (prefunit > 0) { + /* if started above 0, retry from 0 */ + ipath_cdbg(PROC, + "%s[%u] no ports on prefunit " + "%d, clear and re-check\n", + current->comm, current->pid, + prefunit); + devmax = ipath_count_units(NULL, NULL, + NULL); + prefunit = -1; + goto recheck; + } + ret = -EBUSY; + ipath_dbg("No ports available\n"); + } + } else { + ret = -ENXIO; + ipath_dbg("No boards found\n"); + } + +done: + return ret; +} + +static int ipath_open(struct inode *in, struct file *fp) +{ + int ret, minor; + + mutex_lock(&ipath_mutex); + + minor = iminor(in); + ipath_cdbg(VERBOSE, "open on dev %lx (minor %d)\n", + (long)in->i_rdev, minor); + + if (minor) + ret = find_free_port(minor - 1, fp); + else + ret = find_best_unit(fp); + + mutex_unlock(&ipath_mutex); + return ret; +} + +/** + * unlock_exptid - unlock any expected TID entries port still had in use + * @pd: port + * + * We don't actually update the chip here, because we do a bulk update + * below, using ipath_f_clear_tids. + */ +static void unlock_expected_tids(struct ipath_portdata *pd) +{ + struct ipath_devdata *dd = pd->port_dd; + int port_tidbase = pd->port_port * dd->ipath_rcvtidcnt; + int i, cnt = 0, maxtid = port_tidbase + dd->ipath_rcvtidcnt; + + ipath_cdbg(VERBOSE, "Port %u unlocking any locked expTID pages\n", + pd->port_port); + for (i = port_tidbase; i < maxtid; i++) { + if (!dd->ipath_pageshadow[i]) + continue; + + ipath_release_user_pages_on_close(&dd->ipath_pageshadow[i], + 1); + dd->ipath_pageshadow[i] = NULL; + cnt++; + ipath_stats.sps_pageunlocks++; + } + if (cnt) + ipath_cdbg(VERBOSE, "Port %u locked %u expTID entries\n", + pd->port_port, cnt); + + if (ipath_stats.sps_pagelocks || ipath_stats.sps_pageunlocks) + ipath_cdbg(VERBOSE, "%llu pages locked, %llu unlocked\n", + (unsigned long long) ipath_stats.sps_pagelocks, + (unsigned long long) + ipath_stats.sps_pageunlocks); +} + +static int ipath_close(struct inode *in, struct file *fp) +{ + int ret = 0; + struct ipath_portdata *pd; + struct ipath_devdata *dd; + unsigned port; + + ipath_cdbg(VERBOSE, "close on dev %lx, private data %p\n", + (long)in->i_rdev, fp->private_data); + + mutex_lock(&ipath_mutex); + + pd = port_fp(fp); + port = pd->port_port; + fp->private_data = NULL; + dd = pd->port_dd; + + if (pd->port_hdrqfull) { + ipath_cdbg(PROC, "%s[%u] had %u rcvhdrqfull errors " + "during run\n", pd->port_comm, pd->port_pid, + pd->port_hdrqfull); + pd->port_hdrqfull = 0; + } + + if (pd->port_rcvwait_to || pd->port_piowait_to + || pd->port_rcvnowait || pd->port_pionowait) { + ipath_cdbg(VERBOSE, "port%u, %u rcv, %u pio wait timeo; " + "%u rcv %u, pio already\n", + pd->port_port, pd->port_rcvwait_to, + pd->port_piowait_to, pd->port_rcvnowait, + pd->port_pionowait); + pd->port_rcvwait_to = pd->port_piowait_to = + pd->port_rcvnowait = pd->port_pionowait = 0; + } + if (pd->port_flag) { + ipath_dbg("port %u port_flag still set to 0x%lx\n", + pd->port_port, pd->port_flag); + pd->port_flag = 0; + } + + if (dd->ipath_kregbase) { + if (pd->port_rcvhdrtail_uaddr) { + pd->port_rcvhdrtail_uaddr = 0; + pd->port_rcvhdrtail_kvaddr = NULL; + ipath_release_user_pages_on_close( + &pd->port_rcvhdrtail_pagep, 1); + pd->port_rcvhdrtail_pagep = NULL; + ipath_stats.sps_pageunlocks++; + } + ipath_write_kreg_port( + dd, dd->ipath_kregs->kr_rcvhdrtailaddr, + port, 0ULL); + ipath_write_kreg_port( + dd, dd->ipath_kregs->kr_rcvhdraddr, + pd->port_port, 0); + + /* clean up the pkeys for this port user */ + ipath_clean_part_key(pd, dd); + + if (port < dd->ipath_cfgports) { + int i = dd->ipath_pbufsport * (port - 1); + ipath_disarm_piobufs(dd, i, dd->ipath_pbufsport); + + /* atomically clear receive enable port. */ + clear_bit(INFINIPATH_R_PORTENABLE_SHIFT + port, + &dd->ipath_rcvctrl); + ipath_write_kreg( + dd, + dd->ipath_kregs->kr_rcvctrl, + dd->ipath_rcvctrl); + + if (dd->ipath_pageshadow) + unlock_expected_tids(pd); + ipath_stats.sps_ports--; + ipath_cdbg(PROC, "%s[%u] closed port %u:%u\n", + pd->port_comm, pd->port_pid, + dd->ipath_unit, port); + } + } + + pd->port_cnt = 0; + pd->port_pid = 0; + + dd->ipath_f_clear_tids(dd, pd->port_port); + + ipath_free_pddata(dd, pd->port_port, 0); + + mutex_unlock(&ipath_mutex); + + return ret; +} + +static int ipath_port_info(struct ipath_portdata *pd, + struct ipath_port_info __user *uinfo) +{ + struct ipath_port_info info; + int nup; + int ret; + + (void) ipath_count_units(NULL, &nup, NULL); + info.num_active = nup; + info.unit = pd->port_dd->ipath_unit; + info.port = pd->port_port; + + if (copy_to_user(uinfo, &info, sizeof(info))) { + ret = -EFAULT; + goto bail; + } + ret = 0; + +bail: + return ret; +} + +static ssize_t ipath_write(struct file *fp, const char __user *data, + size_t count, loff_t *off) +{ + const struct ipath_cmd __user *ucmd; + struct ipath_portdata *pd; + const void __user *src; + size_t consumed, copy; + struct ipath_cmd cmd; + ssize_t ret = 0; + void *dest; + + if (count < sizeof(cmd.type)) { + ret = -EINVAL; + goto bail; + } + + ucmd = (const struct ipath_cmd __user *) data; + + if (copy_from_user(&cmd.type, &ucmd->type, sizeof(cmd.type))) { + ret = -EFAULT; + goto bail; + } + + consumed = sizeof(cmd.type); + + switch (cmd.type) { + case IPATH_CMD_USER_INIT: + copy = sizeof(cmd.cmd.user_info); + dest = &cmd.cmd.user_info; + src = &ucmd->cmd.user_info; + break; + case IPATH_CMD_RECV_CTRL: + copy = sizeof(cmd.cmd.recv_ctrl); + dest = &cmd.cmd.recv_ctrl; + src = &ucmd->cmd.recv_ctrl; + break; + case IPATH_CMD_PORT_INFO: + copy = sizeof(cmd.cmd.port_info); + dest = &cmd.cmd.port_info; + src = &ucmd->cmd.port_info; + break; + case IPATH_CMD_TID_UPDATE: + case IPATH_CMD_TID_FREE: + copy = sizeof(cmd.cmd.tid_info); + dest = &cmd.cmd.tid_info; + src = &ucmd->cmd.tid_info; + break; + case IPATH_CMD_SET_PART_KEY: + copy = sizeof(cmd.cmd.part_key); + dest = &cmd.cmd.part_key; + src = &ucmd->cmd.part_key; + break; + default: + ret = -EINVAL; + goto bail; + } + + if ((count - consumed) < copy) { + ret = -EINVAL; + goto bail; + } + + if (copy_from_user(dest, src, copy)) { + ret = -EFAULT; + goto bail; + } + + consumed += copy; + pd = port_fp(fp); + + switch (cmd.type) { + case IPATH_CMD_USER_INIT: + ret = ipath_do_user_init(pd, &cmd.cmd.user_info); + if (ret < 0) + goto bail; + ret = ipath_get_base_info( + pd, (void __user *) (unsigned long) + cmd.cmd.user_info.spu_base_info, + cmd.cmd.user_info.spu_base_info_size); + break; + case IPATH_CMD_RECV_CTRL: + ret = ipath_manage_rcvq(pd, cmd.cmd.recv_ctrl); + break; + case IPATH_CMD_PORT_INFO: + ret = ipath_port_info(pd, + (struct ipath_port_info __user *) + (unsigned long) cmd.cmd.port_info); + break; + case IPATH_CMD_TID_UPDATE: + ret = ipath_tid_update(pd, &cmd.cmd.tid_info); + break; + case IPATH_CMD_TID_FREE: + ret = ipath_tid_free(pd, &cmd.cmd.tid_info); + break; + case IPATH_CMD_SET_PART_KEY: + ret = ipath_set_part_key(pd, cmd.cmd.part_key); + break; + } + + if (ret >= 0) + ret = consumed; + +bail: + return ret; +} + +static struct class *ipath_class; + +static int init_cdev(int minor, char *name, struct file_operations *fops, + struct cdev **cdevp, struct class_device **class_devp) +{ + const dev_t dev = MKDEV(IPATH_MAJOR, minor); + struct cdev *cdev = NULL; + struct class_device *class_dev = NULL; + int ret; + + cdev = cdev_alloc(); + if (!cdev) { + printk(KERN_ERR IPATH_DRV_NAME + ": Could not allocate cdev for minor %d, %s\n", + minor, name); + ret = -ENOMEM; + goto done; + } + + cdev->owner = THIS_MODULE; + cdev->ops = fops; + kobject_set_name(&cdev->kobj, name); + + ret = cdev_add(cdev, dev, 1); + if (ret < 0) { + printk(KERN_ERR IPATH_DRV_NAME + ": Could not add cdev for minor %d, %s (err %d)\n", + minor, name, -ret); + goto err_cdev; + } + + class_dev = class_device_create(ipath_class, NULL, dev, NULL, name); + + if (IS_ERR(class_dev)) { + ret = PTR_ERR(class_dev); + printk(KERN_ERR IPATH_DRV_NAME ": Could not create " + "class_dev for minor %d, %s (err %d)\n", + minor, name, -ret); + goto err_cdev; + } + + goto done; + +err_cdev: + cdev_del(cdev); + cdev = NULL; + +done: + if (ret >= 0) { + *cdevp = cdev; + *class_devp = class_dev; + } else { + *cdevp = NULL; + *class_devp = NULL; + } + + return ret; +} + +int ipath_cdev_init(int minor, char *name, struct file_operations *fops, + struct cdev **cdevp, struct class_device **class_devp) +{ + return init_cdev(minor, name, fops, cdevp, class_devp); +} + +static void cleanup_cdev(struct cdev **cdevp, + struct class_device **class_devp) +{ + struct class_device *class_dev = *class_devp; + + if (class_dev) { + class_device_unregister(class_dev); + *class_devp = NULL; + } + + if (*cdevp) { + cdev_del(*cdevp); + *cdevp = NULL; + } +} + +void ipath_cdev_cleanup(struct cdev **cdevp, + struct class_device **class_devp) +{ + cleanup_cdev(cdevp, class_devp); +} + +static struct cdev *wildcard_cdev; +static struct class_device *wildcard_class_dev; + +static const dev_t dev = MKDEV(IPATH_MAJOR, 0); + +static int user_init(void) +{ + int ret; + + ret = register_chrdev_region(dev, IPATH_NMINORS, IPATH_DRV_NAME); + if (ret < 0) { + printk(KERN_ERR IPATH_DRV_NAME ": Could not register " + "chrdev region (err %d)\n", -ret); + goto done; + } + + ipath_class = class_create(THIS_MODULE, IPATH_DRV_NAME); + + if (IS_ERR(ipath_class)) { + ret = PTR_ERR(ipath_class); + printk(KERN_ERR IPATH_DRV_NAME ": Could not create " + "device class (err %d)\n", -ret); + goto bail; + } + + goto done; +bail: + unregister_chrdev_region(dev, IPATH_NMINORS); +done: + return ret; +} + +static void user_cleanup(void) +{ + if (ipath_class) { + class_destroy(ipath_class); + ipath_class = NULL; + } + + unregister_chrdev_region(dev, IPATH_NMINORS); +} + +static atomic_t user_count = ATOMIC_INIT(0); +static atomic_t user_setup = ATOMIC_INIT(0); + +int ipath_user_add(struct ipath_devdata *dd) +{ + char name[10]; + int ret; + + if (atomic_inc_return(&user_count) == 1) { + ret = user_init(); + if (ret < 0) { + ipath_dev_err(dd, "Unable to set up user support: " + "error %d\n", -ret); + goto bail; + } + ret = ipath_diag_init(); + if (ret < 0) { + ipath_dev_err(dd, "Unable to set up diag support: " + "error %d\n", -ret); + goto bail_sma; + } + + ret = init_cdev(0, "ipath", &ipath_file_ops, &wildcard_cdev, + &wildcard_class_dev); + if (ret < 0) { + ipath_dev_err(dd, "Could not create wildcard " + "minor: error %d\n", -ret); + goto bail_diag; + } + + atomic_set(&user_setup, 1); + } + + snprintf(name, sizeof(name), "ipath%d", dd->ipath_unit); + + ret = init_cdev(dd->ipath_unit + 1, name, &ipath_file_ops, + &dd->cdev, &dd->class_dev); + if (ret < 0) + ipath_dev_err(dd, "Could not create user minor %d, %s\n", + dd->ipath_unit + 1, name); + + goto bail; + +bail_diag: + ipath_diag_cleanup(); +bail_sma: + user_cleanup(); +bail: + return ret; +} + +void ipath_user_del(struct ipath_devdata *dd) +{ + cleanup_cdev(&dd->cdev, &dd->class_dev); + + if (atomic_dec_return(&user_count) == 0) { + if (atomic_read(&user_setup) == 0) + goto bail; + + cleanup_cdev(&wildcard_cdev, &wildcard_class_dev); + ipath_diag_cleanup(); + user_cleanup(); + + atomic_set(&user_setup, 0); + } +bail: + return; +} |
