diff options
Diffstat (limited to 'arch/x86/kernel')
55 files changed, 1197 insertions, 2411 deletions
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 9e13763b6092..34244b2cd880 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -45,6 +45,7 @@ obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o obj-y += alternative.o i8253.o pci-nommu.o hw_breakpoint.o obj-y += tsc.o io_delay.o rtc.o obj-y += pci-iommu_table.o +obj-y += resource.o obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o obj-y += process.o @@ -84,7 +85,6 @@ obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_VM86) += vm86_32.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_EARLY_PRINTK_MRST) += early_printk_mrst.o obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_APB_TIMER) += apb_timer.o diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 71232b941b6c..ec881c6bfee0 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -198,6 +198,11 @@ static void __cpuinit acpi_register_lapic(int id, u8 enabled) { unsigned int ver = 0; + if (id >= (MAX_LOCAL_APIC-1)) { + printk(KERN_INFO PREFIX "skipped apicid that is too big\n"); + return; + } + if (!enabled) { ++disabled_cpus; return; @@ -847,18 +852,6 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table) * returns 0 on success, < 0 on error */ -static void __init acpi_register_lapic_address(unsigned long address) -{ - mp_lapic_addr = address; - - set_fixmap_nocache(FIX_APIC_BASE, address); - if (boot_cpu_physical_apicid == -1U) { - boot_cpu_physical_apicid = read_apic_id(); - apic_version[boot_cpu_physical_apicid] = - GET_APIC_VERSION(apic_read(APIC_LVR)); - } -} - static int __init early_acpi_parse_madt_lapic_addr_ovr(void) { int count; @@ -880,7 +873,7 @@ static int __init early_acpi_parse_madt_lapic_addr_ovr(void) return count; } - acpi_register_lapic_address(acpi_lapic_addr); + register_lapic_address(acpi_lapic_addr); return count; } @@ -907,16 +900,16 @@ static int __init acpi_parse_madt_lapic_entries(void) return count; } - acpi_register_lapic_address(acpi_lapic_addr); + register_lapic_address(acpi_lapic_addr); count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC, - acpi_parse_sapic, MAX_APICS); + acpi_parse_sapic, MAX_LOCAL_APIC); if (!count) { x2count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC, - acpi_parse_x2apic, MAX_APICS); + acpi_parse_x2apic, MAX_LOCAL_APIC); count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC, - acpi_parse_lapic, MAX_APICS); + acpi_parse_lapic, MAX_LOCAL_APIC); } if (!count && !x2count) { printk(KERN_ERR PREFIX "No LAPIC entries present\n"); @@ -949,32 +942,6 @@ static int __init acpi_parse_madt_lapic_entries(void) extern int es7000_plat; #endif -static void assign_to_mp_irq(struct mpc_intsrc *m, - struct mpc_intsrc *mp_irq) -{ - memcpy(mp_irq, m, sizeof(struct mpc_intsrc)); -} - -static int mp_irq_cmp(struct mpc_intsrc *mp_irq, - struct mpc_intsrc *m) -{ - return memcmp(mp_irq, m, sizeof(struct mpc_intsrc)); -} - -static void save_mp_irq(struct mpc_intsrc *m) -{ - int i; - - for (i = 0; i < mp_irq_entries; i++) { - if (!mp_irq_cmp(&mp_irqs[i], m)) - return; - } - - assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]); - if (++mp_irq_entries == MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!!\n"); -} - void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) { int ioapic; @@ -1005,7 +972,7 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) mp_irq.dstapic = mp_ioapics[ioapic].apicid; /* APIC ID */ mp_irq.dstirq = pin; /* INTIN# */ - save_mp_irq(&mp_irq); + mp_save_irq(&mp_irq); isa_irq_to_gsi[bus_irq] = gsi; } @@ -1080,7 +1047,7 @@ void __init mp_config_acpi_legacy_irqs(void) mp_irq.srcbusirq = i; /* Identity mapped */ mp_irq.dstirq = pin; - save_mp_irq(&mp_irq); + mp_save_irq(&mp_irq); } } @@ -1117,7 +1084,7 @@ static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger, mp_irq.dstapic = mp_ioapics[ioapic].apicid; mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi); - save_mp_irq(&mp_irq); + mp_save_irq(&mp_irq); #endif return 0; } diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 5079f24c955a..123608531c8f 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -353,6 +353,7 @@ void __init_or_module alternatives_smp_module_del(struct module *mod) mutex_unlock(&smp_alt); } +bool skip_smp_alternatives; void alternatives_smp_switch(int smp) { struct smp_alt_module *mod; @@ -368,7 +369,7 @@ void alternatives_smp_switch(int smp) printk("lockdep: fixing up alternatives.\n"); #endif - if (noreplace_smp || smp_alt_once) + if (noreplace_smp || smp_alt_once || skip_smp_alternatives) return; BUG_ON(!smp && (num_online_cpus() > 1)); @@ -591,17 +592,21 @@ static atomic_t stop_machine_first; static int wrote_text; struct text_poke_params { - void *addr; - const void *opcode; - size_t len; + struct text_poke_param *params; + int nparams; }; static int __kprobes stop_machine_text_poke(void *data) { struct text_poke_params *tpp = data; + struct text_poke_param *p; + int i; if (atomic_dec_and_test(&stop_machine_first)) { - text_poke(tpp->addr, tpp->opcode, tpp->len); + for (i = 0; i < tpp->nparams; i++) { + p = &tpp->params[i]; + text_poke(p->addr, p->opcode, p->len); + } smp_wmb(); /* Make sure other cpus see that this has run */ wrote_text = 1; } else { @@ -610,8 +615,12 @@ static int __kprobes stop_machine_text_poke(void *data) smp_mb(); /* Load wrote_text before following execution */ } - flush_icache_range((unsigned long)tpp->addr, - (unsigned long)tpp->addr + tpp->len); + for (i = 0; i < tpp->nparams; i++) { + p = &tpp->params[i]; + flush_icache_range((unsigned long)p->addr, + (unsigned long)p->addr + p->len); + } + return 0; } @@ -631,10 +640,13 @@ static int __kprobes stop_machine_text_poke(void *data) void *__kprobes text_poke_smp(void *addr, const void *opcode, size_t len) { struct text_poke_params tpp; + struct text_poke_param p; - tpp.addr = addr; - tpp.opcode = opcode; - tpp.len = len; + p.addr = addr; + p.opcode = opcode; + p.len = len; + tpp.params = &p; + tpp.nparams = 1; atomic_set(&stop_machine_first, 1); wrote_text = 0; /* Use __stop_machine() because the caller already got online_cpus. */ @@ -642,6 +654,26 @@ void *__kprobes text_poke_smp(void *addr, const void *opcode, size_t len) return addr; } +/** + * text_poke_smp_batch - Update instructions on a live kernel on SMP + * @params: an array of text_poke parameters + * @n: the number of elements in params. + * + * Modify multi-byte instruction by using stop_machine() on SMP. Since the + * stop_machine() is heavy task, it is better to aggregate text_poke requests + * and do it once if possible. + * + * Note: Must be called under get_online_cpus() and text_mutex. + */ +void __kprobes text_poke_smp_batch(struct text_poke_param *params, int n) +{ + struct text_poke_params tpp = {.params = params, .nparams = n}; + + atomic_set(&stop_machine_first, 1); + wrote_text = 0; + stop_machine(stop_machine_text_poke, (void *)&tpp, NULL); +} + #if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL) #ifdef CONFIG_X86_64 diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c index 8f6463d8ed0d..affacb5e0065 100644 --- a/arch/x86/kernel/amd_nb.c +++ b/arch/x86/kernel/amd_nb.c @@ -12,95 +12,116 @@ static u32 *flush_words; -struct pci_device_id k8_nb_ids[] = { +struct pci_device_id amd_nb_misc_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_MISC) }, {} }; -EXPORT_SYMBOL(k8_nb_ids); +EXPORT_SYMBOL(amd_nb_misc_ids); -struct k8_northbridge_info k8_northbridges; -EXPORT_SYMBOL(k8_northbridges); +struct amd_northbridge_info amd_northbridges; +EXPORT_SYMBOL(amd_northbridges); -static struct pci_dev *next_k8_northbridge(struct pci_dev *dev) +static struct pci_dev *next_northbridge(struct pci_dev *dev, + struct pci_device_id *ids) { do { dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev); if (!dev) break; - } while (!pci_match_id(&k8_nb_ids[0], dev)); + } while (!pci_match_id(ids, dev)); return dev; } -int cache_k8_northbridges(void) +int amd_cache_northbridges(void) { - int i; - struct pci_dev *dev; + int i = 0; + struct amd_northbridge *nb; + struct pci_dev *misc; - if (k8_northbridges.num) + if (amd_nb_num()) return 0; - dev = NULL; - while ((dev = next_k8_northbridge(dev)) != NULL) - k8_northbridges.num++; + misc = NULL; + while ((misc = next_northbridge(misc, amd_nb_misc_ids)) != NULL) + i++; - /* some CPU families (e.g. family 0x11) do not support GART */ - if (boot_cpu_data.x86 == 0xf || boot_cpu_data.x86 == 0x10 || - boot_cpu_data.x86 == 0x15) - k8_northbridges.gart_supported = 1; + if (i == 0) + return 0; - k8_northbridges.nb_misc = kmalloc((k8_northbridges.num + 1) * - sizeof(void *), GFP_KERNEL); - if (!k8_northbridges.nb_misc) + nb = kzalloc(i * sizeof(struct amd_northbridge), GFP_KERNEL); + if (!nb) return -ENOMEM; - if (!k8_northbridges.num) { - k8_northbridges.nb_misc[0] = NULL; - return 0; - } + amd_northbridges.nb = nb; + amd_northbridges.num = i; - if (k8_northbridges.gart_supported) { - flush_words = kmalloc(k8_northbridges.num * sizeof(u32), - GFP_KERNEL); - if (!flush_words) { - kfree(k8_northbridges.nb_misc); - return -ENOMEM; - } - } + misc = NULL; + for (i = 0; i != amd_nb_num(); i++) { + node_to_amd_nb(i)->misc = misc = + next_northbridge(misc, amd_nb_misc_ids); + } + + /* some CPU families (e.g. family 0x11) do not support GART */ + if (boot_cpu_data.x86 == 0xf || boot_cpu_data.x86 == 0x10 || + boot_cpu_data.x86 == 0x15) + amd_northbridges.flags |= AMD_NB_GART; + + /* + * Some CPU families support L3 Cache Index Disable. There are some + * limitations because of E382 and E388 on family 0x10. + */ + if (boot_cpu_data.x86 == 0x10 && + boot_cpu_data.x86_model >= 0x8 && + (boot_cpu_data.x86_model > 0x9 || + boot_cpu_data.x86_mask >= 0x1)) + amd_northbridges.flags |= AMD_NB_L3_INDEX_DISABLE; - dev = NULL; - i = 0; - while ((dev = next_k8_northbridge(dev)) != NULL) { - k8_northbridges.nb_misc[i] = dev; - if (k8_northbridges.gart_supported) - pci_read_config_dword(dev, 0x9c, &flush_words[i++]); - } - k8_northbridges.nb_misc[i] = NULL; return 0; } -EXPORT_SYMBOL_GPL(cache_k8_northbridges); +EXPORT_SYMBOL_GPL(amd_cache_northbridges); /* Ignores subdevice/subvendor but as far as I can figure out they're useless anyways */ -int __init early_is_k8_nb(u32 device) +int __init early_is_amd_nb(u32 device) { struct pci_device_id *id; u32 vendor = device & 0xffff; device >>= 16; - for (id = k8_nb_ids; id->vendor; id++) + for (id = amd_nb_misc_ids; id->vendor; id++) if (vendor == id->vendor && device == id->device) return 1; return 0; } -void k8_flush_garts(void) +int amd_cache_gart(void) +{ + int i; + + if (!amd_nb_has_feature(AMD_NB_GART)) + return 0; + + flush_words = kmalloc(amd_nb_num() * sizeof(u32), GFP_KERNEL); + if (!flush_words) { + amd_northbridges.flags &= ~AMD_NB_GART; + return -ENOMEM; + } + + for (i = 0; i != amd_nb_num(); i++) + pci_read_config_dword(node_to_amd_nb(i)->misc, 0x9c, + &flush_words[i]); + + return 0; +} + +void amd_flush_garts(void) { int flushed, i; unsigned long flags; static DEFINE_SPINLOCK(gart_lock); - if (!k8_northbridges.gart_supported) + if (!amd_nb_has_feature(AMD_NB_GART)) return; /* Avoid races between AGP and IOMMU. In theory it's not needed @@ -109,16 +130,16 @@ void k8_flush_garts(void) that it doesn't matter to serialize more. -AK */ spin_lock_irqsave(&gart_lock, flags); flushed = 0; - for (i = 0; i < k8_northbridges.num; i++) { - pci_write_config_dword(k8_northbridges.nb_misc[i], 0x9c, - flush_words[i]|1); + for (i = 0; i < amd_nb_num(); i++) { + pci_write_config_dword(node_to_amd_nb(i)->misc, 0x9c, + flush_words[i] | 1); flushed++; } - for (i = 0; i < k8_northbridges.num; i++) { + for (i = 0; i < amd_nb_num(); i++) { u32 w; /* Make sure the hardware actually executed the flush*/ for (;;) { - pci_read_config_dword(k8_northbridges.nb_misc[i], + pci_read_config_dword(node_to_amd_nb(i)->misc, 0x9c, &w); if (!(w & 1)) break; @@ -129,19 +150,23 @@ void k8_flush_garts(void) if (!flushed) printk("nothing to flush?\n"); } -EXPORT_SYMBOL_GPL(k8_flush_garts); +EXPORT_SYMBOL_GPL(amd_flush_garts); -static __init int init_k8_nbs(void) +static __init int init_amd_nbs(void) { int err = 0; - err = cache_k8_northbridges(); + err = amd_cache_northbridges(); if (err < 0) - printk(KERN_NOTICE "K8 NB: Cannot enumerate AMD northbridges.\n"); + printk(KERN_NOTICE "AMD NB: Cannot enumerate AMD northbridges.\n"); + + if (amd_cache_gart() < 0) + printk(KERN_NOTICE "AMD NB: Cannot initialize GART flush words, " + "GART support disabled.\n"); return err; } /* This has to go after the PCI subsystem */ -fs_initcall(init_k8_nbs); +fs_initcall(init_amd_nbs); diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c index 92543c73cf8e..7c9ab59653e8 100644 --- a/arch/x86/kernel/apb_timer.c +++ b/arch/x86/kernel/apb_timer.c @@ -315,6 +315,7 @@ static void apbt_setup_irq(struct apbt_dev *adev) if (system_state == SYSTEM_BOOTING) { irq_modify_status(adev->irq, 0, IRQ_MOVE_PCNTXT); + irq_set_affinity(adev->irq, cpumask_of(adev->cpu)); /* APB timer irqs are set up as mp_irqs, timer is edge type */ __set_irq_handler(adev->irq, handle_edge_irq, 0, "edge"); if (request_irq(adev->irq, apbt_interrupt_handler, diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index b3a16e8f0703..dcd7c83e1659 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -206,7 +206,7 @@ static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) * Do an PCI bus scan by hand because we're running before the PCI * subsystem. * - * All K8 AGP bridges are AGPv3 compliant, so we can do this scan + * All AMD AGP bridges are AGPv3 compliant, so we can do this scan * generically. It's probably overkill to always scan all slots because * the AGP bridges should be always an own bus on the HT hierarchy, * but do it here for future safety. @@ -303,7 +303,7 @@ void __init early_gart_iommu_check(void) dev_limit = bus_dev_ranges[i].dev_limit; for (slot = dev_base; slot < dev_limit; slot++) { - if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + if (!early_is_amd_nb(read_pci_config(bus, slot, 3, 0x00))) continue; ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL); @@ -358,7 +358,7 @@ void __init early_gart_iommu_check(void) dev_limit = bus_dev_ranges[i].dev_limit; for (slot = dev_base; slot < dev_limit; slot++) { - if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + if (!early_is_amd_nb(read_pci_config(bus, slot, 3, 0x00))) continue; ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL); @@ -400,7 +400,7 @@ int __init gart_iommu_hole_init(void) dev_limit = bus_dev_ranges[i].dev_limit; for (slot = dev_base; slot < dev_limit; slot++) { - if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + if (!early_is_amd_nb(read_pci_config(bus, slot, 3, 0x00))) continue; iommu_detected = 1; @@ -518,7 +518,7 @@ out: dev_base = bus_dev_ranges[i].dev_base; dev_limit = bus_dev_ranges[i].dev_limit; for (slot = dev_base; slot < dev_limit; slot++) { - if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + if (!early_is_amd_nb(read_pci_config(bus, slot, 3, 0x00))) continue; write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl); diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile index 910f20b457c4..3966b564ea47 100644 --- a/arch/x86/kernel/apic/Makefile +++ b/arch/x86/kernel/apic/Makefile @@ -3,10 +3,7 @@ # obj-$(CONFIG_X86_LOCAL_APIC) += apic.o apic_noop.o probe_$(BITS).o ipi.o -ifneq ($(CONFIG_HARDLOCKUP_DETECTOR),y) -obj-$(CONFIG_X86_LOCAL_APIC) += nmi.o -endif -obj-$(CONFIG_HARDLOCKUP_DETECTOR) += hw_nmi.o +obj-y += hw_nmi.o obj-$(CONFIG_X86_IO_APIC) += io_apic.o obj-$(CONFIG_SMP) += ipi.o diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 3f838d537392..ce65d449b750 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -31,7 +31,6 @@ #include <linux/init.h> #include <linux/cpu.h> #include <linux/dmi.h> -#include <linux/nmi.h> #include <linux/smp.h> #include <linux/mm.h> @@ -432,17 +431,18 @@ int setup_APIC_eilvt(u8 offset, u8 vector, u8 msg_type, u8 mask) reserved = reserve_eilvt_offset(offset, new); if (reserved != new) { - pr_err(FW_BUG "cpu %d, try to setup vector 0x%x, but " - "vector 0x%x was already reserved by another core, " - "APIC%lX=0x%x\n", - smp_processor_id(), new, reserved, reg, old); + pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for " + "vector 0x%x, but the register is already in use for " + "vector 0x%x on another cpu\n", + smp_processor_id(), reg, offset, new, reserved); return -EINVAL; } if (!eilvt_entry_is_changeable(old, new)) { - pr_err(FW_BUG "cpu %d, try to setup vector 0x%x but " - "register already in use, APIC%lX=0x%x\n", - smp_processor_id(), new, reg, old); + pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for " + "vector 0x%x, but the register is already in use for " + "vector 0x%x on this cpu\n", + smp_processor_id(), reg, offset, new, old); return -EBUSY; } @@ -799,11 +799,7 @@ void __init setup_boot_APIC_clock(void) * PIT/HPET going. Otherwise register lapic as a dummy * device. */ - if (nmi_watchdog != NMI_IO_APIC) - lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; - else - pr_warning("APIC timer registered as dummy," - " due to nmi_watchdog=%d!\n", nmi_watchdog); + lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; /* Setup the lapic or request the broadcast */ setup_APIC_timer(); @@ -1195,12 +1191,15 @@ static void __cpuinit lapic_setup_esr(void) oldvalue, value); } - /** * setup_local_APIC - setup the local APIC + * + * Used to setup local APIC while initializing BSP or bringin up APs. + * Always called with preemption disabled. */ void __cpuinit setup_local_APIC(void) { + int cpu = smp_processor_id(); unsigned int value, queued; int i, j, acked = 0; unsigned long long tsc = 0, ntsc; @@ -1225,8 +1224,6 @@ void __cpuinit setup_local_APIC(void) #endif perf_events_lapic_init(); - preempt_disable(); - /* * Double-check whether this APIC is really registered. * This is meaningless in clustered apic mode, so we skip it. @@ -1342,21 +1339,19 @@ void __cpuinit setup_local_APIC(void) * TODO: set up through-local-APIC from through-I/O-APIC? --macro */ value = apic_read(APIC_LVT0) & APIC_LVT_MASKED; - if (!smp_processor_id() && (pic_mode || !value)) { + if (!cpu && (pic_mode || !value)) { value = APIC_DM_EXTINT; - apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", - smp_processor_id()); + apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", cpu); } else { value = APIC_DM_EXTINT | APIC_LVT_MASKED; - apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", - smp_processor_id()); + apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", cpu); } apic_write(APIC_LVT0, value); /* * only the BP should see the LINT1 NMI signal, obviously. */ - if (!smp_processor_id()) + if (!cpu) value = APIC_DM_NMI; else value = APIC_DM_NMI | APIC_LVT_MASKED; @@ -1364,11 +1359,9 @@ void __cpuinit setup_local_APIC(void) value |= APIC_LVT_LEVEL_TRIGGER; apic_write(APIC_LVT1, value); - preempt_enable(); - #ifdef CONFIG_X86_MCE_INTEL /* Recheck CMCI information after local APIC is up on CPU #0 */ - if (smp_processor_id() == 0) + if (!cpu) cmci_recheck(); #endif } @@ -1387,8 +1380,15 @@ void __cpuinit end_local_APIC_setup(void) } #endif - setup_apic_nmi_watchdog(NULL); apic_pm_activate(); + + /* + * Now that local APIC setup is completed for BP, configure the fault + * handling for interrupt remapping. + */ + if (!smp_processor_id() && intr_remapping_enabled) + enable_drhd_fault_handling(); + } #ifdef CONFIG_X86_X2APIC @@ -1530,13 +1530,60 @@ static int __init detect_init_APIC(void) return 0; } #else + +static int apic_verify(void) +{ + u32 features, h, l; + + /* + * The APIC feature bit should now be enabled + * in `cpuid' + */ + features = cpuid_edx(1); + if (!(features & (1 << X86_FEATURE_APIC))) { + pr_warning("Could not enable APIC!\n"); + return -1; + } + set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); + mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; + + /* The BIOS may have set up the APIC at some other address */ + rdmsr(MSR_IA32_APICBASE, l, h); + if (l & MSR_IA32_APICBASE_ENABLE) + mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; + + pr_info("Found and enabled local APIC!\n"); + return 0; +} + +int apic_force_enable(void) +{ + u32 h, l; + + if (disable_apic) + return -1; + + /* + * Some BIOSes disable the local APIC in the APIC_BASE + * MSR. This can only be done in software for Intel P6 or later + * and AMD K7 (Model > 1) or later. + */ + rdmsr(MSR_IA32_APICBASE, l, h); + if (!(l & MSR_IA32_APICBASE_ENABLE)) { + pr_info("Local APIC disabled by BIOS -- reenabling.\n"); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE; + wrmsr(MSR_IA32_APICBASE, l, h); + enabled_via_apicbase = 1; + } + return apic_verify(); +} + /* * Detect and initialize APIC */ static int __init detect_init_APIC(void) { - u32 h, l, features; - /* Disabled by kernel option? */ if (disable_apic) return -1; @@ -1566,38 +1613,12 @@ static int __init detect_init_APIC(void) "you can enable it with \"lapic\"\n"); return -1; } - /* - * Some BIOSes disable the local APIC in the APIC_BASE - * MSR. This can only be done in software for Intel P6 or later - * and AMD K7 (Model > 1) or later. - */ - rdmsr(MSR_IA32_APICBASE, l, h); - if (!(l & MSR_IA32_APICBASE_ENABLE)) { - pr_info("Local APIC disabled by BIOS -- reenabling.\n"); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE; - wrmsr(MSR_IA32_APICBASE, l, h); - enabled_via_apicbase = 1; - } - } - /* - * The APIC feature bit should now be enabled - * in `cpuid' - */ - features = cpuid_edx(1); - if (!(features & (1 << X86_FEATURE_APIC))) { - pr_warning("Could not enable APIC!\n"); - return -1; + if (apic_force_enable()) + return -1; + } else { + if (apic_verify()) + return -1; } - set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); - mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - - /* The BIOS may have set up the APIC at some other address */ - rdmsr(MSR_IA32_APICBASE, l, h); - if (l & MSR_IA32_APICBASE_ENABLE) - mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; - - pr_info("Found and enabled local APIC!\n"); apic_pm_activate(); @@ -1609,28 +1630,6 @@ no_apic: } #endif -#ifdef CONFIG_X86_64 -void __init early_init_lapic_mapping(void) -{ - /* - * If no local APIC can be found then go out - * : it means there is no mpatable and MADT - */ - if (!smp_found_config) - return; - - set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr); - apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", - APIC_BASE, mp_lapic_addr); - - /* - * Fetch the APIC ID of the BSP in case we have a - * default configuration (or the MP table is broken). - */ - boot_cpu_physical_apicid = read_apic_id(); -} -#endif - /** * init_apic_mappings - initialize APIC mappings */ @@ -1656,10 +1655,7 @@ void __init init_apic_mappings(void) * acpi_register_lapic_address() */ if (!acpi_lapic && !smp_found_config) - set_fixmap_nocache(FIX_APIC_BASE, apic_phys); - - apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n", - APIC_BASE, apic_phys); + register_lapic_address(apic_phys); } /* @@ -1681,11 +1677,27 @@ void __init init_apic_mappings(void) } } +void __init register_lapic_address(unsigned long address) +{ + mp_lapic_addr = address; + + if (!x2apic_mode) { + set_fixmap_nocache(FIX_APIC_BASE, address); + apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", + APIC_BASE, mp_lapic_addr); + } + if (boot_cpu_physical_apicid == -1U) { + boot_cpu_physical_apicid = read_apic_id(); + apic_version[boot_cpu_physical_apicid] = + GET_APIC_VERSION(apic_read(APIC_LVR)); + } +} + /* * This initializes the IO-APIC and APIC hardware if this is * a UP kernel. */ -int apic_version[MAX_APICS]; +int apic_version[MAX_LOCAL_APIC]; int __init APIC_init_uniprocessor(void) { @@ -1750,17 +1762,10 @@ int __init APIC_init_uniprocessor(void) setup_IO_APIC(); else { nr_ioapics = 0; - localise_nmi_watchdog(); } -#else - localise_nmi_watchdog(); #endif x86_init.timers.setup_percpu_clockev(); -#ifdef CONFIG_X86_64 - check_nmi_watchdog(); -#endif - return 0; } diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c index cefd6942f0e9..72ec29e1ae06 100644 --- a/arch/x86/kernel/apic/hw_nmi.c +++ b/arch/x86/kernel/apic/hw_nmi.c @@ -17,19 +17,31 @@ #include <linux/nmi.h> #include <linux/module.h> -/* For reliability, we're prepared to waste bits here. */ -static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly; - +#ifdef CONFIG_HARDLOCKUP_DETECTOR u64 hw_nmi_get_sample_period(void) { return (u64)(cpu_khz) * 1000 * 60; } +#endif + +#ifdef arch_trigger_all_cpu_backtrace +/* For reliability, we're prepared to waste bits here. */ +static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly; + +/* "in progress" flag of arch_trigger_all_cpu_backtrace */ +static unsigned long backtrace_flag; -#ifdef ARCH_HAS_NMI_WATCHDOG void arch_trigger_all_cpu_backtrace(void) { int i; + if (test_and_set_bit(0, &backtrace_flag)) + /* + * If there is already a trigger_all_cpu_backtrace() in progress + * (backtrace_flag == 1), don't output double cpu dump infos. + */ + return; + cpumask_copy(to_cpumask(backtrace_mask), cpu_online_mask); printk(KERN_INFO "sending NMI to all CPUs:\n"); @@ -41,6 +53,9 @@ void arch_trigger_all_cpu_backtrace(void) break; mdelay(1); } + + clear_bit(0, &backtrace_flag); + smp_mb__after_clear_bit(); } static int __kprobes @@ -49,7 +64,7 @@ arch_trigger_all_cpu_backtrace_handler(struct notifier_block *self, { struct die_args *args = __args; struct pt_regs *regs; - int cpu = smp_processor_id(); + int cpu; switch (cmd) { case DIE_NMI: @@ -61,6 +76,7 @@ arch_trigger_all_cpu_backtrace_handler(struct notifier_block *self, } regs = args->regs; + cpu = smp_processor_id(); if (cpumask_test_cpu(cpu, to_cpumask(backtrace_mask))) { static arch_spinlock_t lock = __ARCH_SPIN_LOCK_UNLOCKED; @@ -90,18 +106,3 @@ static int __init register_trigger_all_cpu_backtrace(void) } early_initcall(register_trigger_all_cpu_backtrace); #endif - -/* STUB calls to mimic old nmi_watchdog behaviour */ -#if defined(CONFIG_X86_LOCAL_APIC) -unsigned int nmi_watchdog = NMI_NONE; -EXPORT_SYMBOL(nmi_watchdog); -void acpi_nmi_enable(void) { return; } -void acpi_nmi_disable(void) { return; } -#endif -atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ -EXPORT_SYMBOL(nmi_active); -int unknown_nmi_panic; -void cpu_nmi_set_wd_enabled(void) { return; } -void stop_apic_nmi_watchdog(void *unused) { return; } -void setup_apic_nmi_watchdog(void *unused) { return; } -int __init check_nmi_watchdog(void) { return 0; } diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 7cc0a721f628..52735a710c30 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -54,7 +54,6 @@ #include <asm/dma.h> #include <asm/timer.h> #include <asm/i8259.h> -#include <asm/nmi.h> #include <asm/msidef.h> #include <asm/hypertransport.h> #include <asm/setup.h> @@ -126,6 +125,26 @@ static int __init parse_noapic(char *str) } early_param("noapic", parse_noapic); +/* Will be called in mpparse/acpi/sfi codes for saving IRQ info */ +void mp_save_irq(struct mpc_intsrc *m) +{ + int i; + + apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x," + " IRQ %02x, APIC ID %x, APIC INT %02x\n", + m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbus, + m->srcbusirq, m->dstapic, m->dstirq); + + for (i = 0; i < mp_irq_entries; i++) { + if (!memcmp(&mp_irqs[i], m, sizeof(*m))) + return; + } + + memcpy(&mp_irqs[mp_irq_entries], m, sizeof(*m)); + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); +} + struct irq_pin_list { int apic, pin; struct irq_pin_list *next; @@ -136,6 +155,7 @@ static struct irq_pin_list *alloc_irq_pin_list(int node) return kzalloc_node(sizeof(struct irq_pin_list), GFP_KERNEL, node); } + /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */ #ifdef CONFIG_SPARSE_IRQ static struct irq_cfg irq_cfgx[NR_IRQS_LEGACY]; @@ -1934,8 +1954,7 @@ void disable_IO_APIC(void) * * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999 */ - -void __init setup_ioapic_ids_from_mpc(void) +void __init setup_ioapic_ids_from_mpc_nocheck(void) { union IO_APIC_reg_00 reg_00; physid_mask_t phys_id_present_map; @@ -1944,15 +1963,6 @@ void __init setup_ioapic_ids_from_mpc(void) unsigned char old_id; unsigned long flags; - if (acpi_ioapic) - return; - /* - * Don't check I/O APIC IDs for xAPIC systems. They have - * no meaning without the serial APIC bus. - */ - if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) - || APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) - return; /* * This is broken; anything with a real cpu count has to * circumvent this idiocy regardless. @@ -2006,7 +2016,6 @@ void __init setup_ioapic_ids_from_mpc(void) physids_or(phys_id_present_map, phys_id_present_map, tmp); } - /* * We need to adjust the IRQ routing table * if the ID changed. @@ -2018,9 +2027,12 @@ void __init setup_ioapic_ids_from_mpc(void) = mp_ioapics[apic_id].apicid; /* - * Read the right value from the MPC table and - * write it into the ID register. + * Update the ID register according to the right value + * from the MPC table if they are different. */ + if (mp_ioapics[apic_id].apicid == reg_00.bits.ID) + continue; + apic_printk(APIC_VERBOSE, KERN_INFO "...changing IO-APIC physical APIC ID to %d ...", mp_ioapics[apic_id].apicid); @@ -2042,6 +2054,21 @@ void __init setup_ioapic_ids_from_mpc(void) apic_printk(APIC_VERBOSE, " ok.\n"); } } + +void __init setup_ioapic_ids_from_mpc(void) +{ + + if (acpi_ioapic) + return; + /* + * Don't check I/O APIC IDs for xAPIC systems. They have + * no meaning without the serial APIC bus. + */ + if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) + || APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + return; + setup_ioapic_ids_from_mpc_nocheck(); +} #endif int no_timer_check __initdata; @@ -2430,13 +2457,12 @@ static void ack_apic_level(struct irq_data *data) { struct irq_cfg *cfg = data->chip_data; int i, do_unmask_irq = 0, irq = data->irq; - struct irq_desc *desc = irq_to_desc(irq); unsigned long v; irq_complete_move(cfg); #ifdef CONFIG_GENERIC_PENDING_IRQ /* If we are moving the irq we need to mask it */ - if (unlikely(desc->status & IRQ_MOVE_PENDING)) { + if (unlikely(irq_to_desc(irq)->status & IRQ_MOVE_PENDING)) { do_unmask_irq = 1; mask_ioapic(cfg); } @@ -2643,24 +2669,6 @@ static void lapic_register_intr(int irq) "edge"); } -static void __init setup_nmi(void) -{ - /* - * Dirty trick to enable the NMI watchdog ... - * We put the 8259A master into AEOI mode and - * unmask on all local APICs LVT0 as NMI. - * - * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire') - * is from Maciej W. Rozycki - so we do not have to EOI from - * the NMI handler or the timer interrupt. - */ - apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ..."); - - enable_NMI_through_LVT0(); - - apic_printk(APIC_VERBOSE, " done.\n"); -} - /* * This looks a bit hackish but it's about the only one way of sending * a few INTA cycles to 8259As and any associated glue logic. ICR does @@ -2766,15 +2774,6 @@ static inline void __init check_timer(void) */ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); legacy_pic->init(1); -#ifdef CONFIG_X86_32 - { - unsigned int ver; - - ver = apic_read(APIC_LVR); - ver = GET_APIC_VERSION(ver); - timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver)); - } -#endif pin1 = find_isa_irq_pin(0, mp_INT); apic1 = find_isa_irq_apic(0, mp_INT); @@ -2822,10 +2821,6 @@ static inline void __init check_timer(void) unmask_ioapic(cfg); } if (timer_irq_works()) { - if (nmi_watchdog == NMI_IO_APIC) { - setup_nmi(); - legacy_pic->unmask(0); - } if (disable_timer_pin_1 > 0) clear_IO_APIC_pin(0, pin1); goto out; @@ -2851,11 +2846,6 @@ static inline void __init check_timer(void) if (timer_irq_works()) { apic_printk(APIC_QUIET, KERN_INFO "....... works.\n"); timer_through_8259 = 1; - if (nmi_watchdog == NMI_IO_APIC) { - legacy_pic->mask(0); - setup_nmi(); - legacy_pic->unmask(0); - } goto out; } /* @@ -2867,15 +2857,6 @@ static inline void __init check_timer(void) apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n"); } - if (nmi_watchdog == NMI_IO_APIC) { - apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work " - "through the IO-APIC - disabling NMI Watchdog!\n"); - nmi_watchdog = NMI_NONE; - } -#ifdef CONFIG_X86_32 - timer_ack = 0; -#endif - apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer as Virtual Wire IRQ...\n"); @@ -3413,6 +3394,7 @@ dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask, msg.data |= MSI_DATA_VECTOR(cfg->vector); msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK; msg.address_lo |= MSI_ADDR_DEST_ID(dest); + msg.address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(dest); dmar_msi_write(irq, &msg); @@ -3639,7 +3621,7 @@ int __init io_apic_get_redir_entries (int ioapic) return reg_01.bits.entries + 1; } -void __init probe_nr_irqs_gsi(void) +static void __init probe_nr_irqs_gsi(void) { int nr; @@ -3956,7 +3938,7 @@ static struct resource * __init ioapic_setup_resources(int nr_ioapics) return res; } -void __init ioapic_init_mappings(void) +void __init ioapic_and_gsi_init(void) { unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; struct resource *ioapic_res; @@ -3994,6 +3976,8 @@ fake_ioapic_page: ioapic_res->end = ioapic_phys + IO_APIC_SLOT_SIZE - 1; ioapic_res++; } + + probe_nr_irqs_gsi(); } void __init ioapic_insert_resources(void) @@ -4103,7 +4087,8 @@ void __init pre_init_apic_IRQ0(void) printk(KERN_INFO "Early APIC setup for system timer0\n"); #ifndef CONFIG_SMP - phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); + physid_set_mask_of_physid(boot_cpu_physical_apicid, + &phys_cpu_present_map); #endif /* Make sure the irq descriptor is set up */ cfg = alloc_irq_and_cfg_at(0, 0); diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c deleted file mode 100644 index c90041ccb742..000000000000 --- a/arch/x86/kernel/apic/nmi.c +++ /dev/null @@ -1,567 +0,0 @@ -/* - * NMI watchdog support on APIC systems - * - * Started by Ingo Molnar <mingo@redhat.com> - * - * Fixes: - * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog. - * Mikael Pettersson : Power Management for local APIC NMI watchdog. - * Mikael Pettersson : Pentium 4 support for local APIC NMI watchdog. - * Pavel Machek and - * Mikael Pettersson : PM converted to driver model. Disable/enable API. - */ - -#include <asm/apic.h> - -#include <linux/nmi.h> -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/sysdev.h> -#include <linux/sysctl.h> -#include <linux/percpu.h> -#include <linux/kprobes.h> -#include <linux/cpumask.h> -#include <linux/kernel_stat.h> -#include <linux/kdebug.h> -#include <linux/smp.h> - -#include <asm/i8259.h> -#include <asm/io_apic.h> -#include <asm/proto.h> -#include <asm/timer.h> - -#include <asm/mce.h> - -#include <asm/mach_traps.h> - -int unknown_nmi_panic; -int nmi_watchdog_enabled; - -/* For reliability, we're prepared to waste bits here. */ -static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly; - -/* nmi_active: - * >0: the lapic NMI watchdog is active, but can be disabled - * <0: the lapic NMI watchdog has not been set up, and cannot - * be enabled - * 0: the lapic NMI watchdog is disabled, but can be enabled - */ -atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ -EXPORT_SYMBOL(nmi_active); - -unsigned int nmi_watchdog = NMI_NONE; -EXPORT_SYMBOL(nmi_watchdog); - -static int panic_on_timeout; - -static unsigned int nmi_hz = HZ; -static DEFINE_PER_CPU(short, wd_enabled); -static int endflag __initdata; - -static inline unsigned int get_nmi_count(int cpu) -{ - return per_cpu(irq_stat, cpu).__nmi_count; -} - -static inline int mce_in_progress(void) -{ -#if defined(CONFIG_X86_MCE) - return atomic_read(&mce_entry) > 0; -#endif - return 0; -} - -/* - * Take the local apic timer and PIT/HPET into account. We don't - * know which one is active, when we have highres/dyntick on - */ -static inline unsigned int get_timer_irqs(int cpu) -{ - return per_cpu(irq_stat, cpu).apic_timer_irqs + - per_cpu(irq_stat, cpu).irq0_irqs; -} - -#ifdef CONFIG_SMP -/* - * The performance counters used by NMI_LOCAL_APIC don't trigger when - * the CPU is idle. To make sure the NMI watchdog really ticks on all - * CPUs during the test make them busy. - */ -static __init void nmi_cpu_busy(void *data) -{ - local_irq_enable_in_hardirq(); - /* - * Intentionally don't use cpu_relax here. This is - * to make sure that the performance counter really ticks, - * even if there is a simulator or similar that catches the - * pause instruction. On a real HT machine this is fine because - * all other CPUs are busy with "useless" delay loops and don't - * care if they get somewhat less cycles. - */ - while (endflag == 0) - mb(); -} -#endif - -static void report_broken_nmi(int cpu, unsigned int *prev_nmi_count) -{ - printk(KERN_CONT "\n"); - - printk(KERN_WARNING - "WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n", - cpu, prev_nmi_count[cpu], get_nmi_count(cpu)); - - printk(KERN_WARNING - "Please report this to bugzilla.kernel.org,\n"); - printk(KERN_WARNING - "and attach the output of the 'dmesg' command.\n"); - - per_cpu(wd_enabled, cpu) = 0; - atomic_dec(&nmi_active); -} - -static void __acpi_nmi_disable(void *__unused) -{ - apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); -} - -int __init check_nmi_watchdog(void) -{ - unsigned int *prev_nmi_count; - int cpu; - - if (!nmi_watchdog_active() || !atomic_read(&nmi_active)) - return 0; - - prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(int), GFP_KERNEL); - if (!prev_nmi_count) - goto error; - - printk(KERN_INFO "Testing NMI watchdog ... "); - -#ifdef CONFIG_SMP - if (nmi_watchdog == NMI_LOCAL_APIC) - smp_call_function(nmi_cpu_busy, (void *)&endflag, 0); -#endif - - for_each_possible_cpu(cpu) - prev_nmi_count[cpu] = get_nmi_count(cpu); - local_irq_enable(); - mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */ - - for_each_online_cpu(cpu) { - if (!per_cpu(wd_enabled, cpu)) - continue; - if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) - report_broken_nmi(cpu, prev_nmi_count); - } - endflag = 1; - if (!atomic_read(&nmi_active)) { - kfree(prev_nmi_count); - atomic_set(&nmi_active, -1); - goto error; - } - printk("OK.\n"); - - /* - * now that we know it works we can reduce NMI frequency to - * something more reasonable; makes a difference in some configs - */ - if (nmi_watchdog == NMI_LOCAL_APIC) - nmi_hz = lapic_adjust_nmi_hz(1); - - kfree(prev_nmi_count); - return 0; -error: - if (nmi_watchdog == NMI_IO_APIC) { - if (!timer_through_8259) - legacy_pic->mask(0); - on_each_cpu(__acpi_nmi_disable, NULL, 1); - } - -#ifdef CONFIG_X86_32 - timer_ack = 0; -#endif - return -1; -} - -static int __init setup_nmi_watchdog(char *str) -{ - unsigned int nmi; - - if (!strncmp(str, "panic", 5)) { - panic_on_timeout = 1; - str = strchr(str, ','); - if (!str) - return 1; - ++str; - } - - if (!strncmp(str, "lapic", 5)) - nmi_watchdog = NMI_LOCAL_APIC; - else if (!strncmp(str, "ioapic", 6)) - nmi_watchdog = NMI_IO_APIC; - else { - get_option(&str, &nmi); - if (nmi >= NMI_INVALID) - return 0; - nmi_watchdog = nmi; - } - - return 1; -} -__setup("nmi_watchdog=", setup_nmi_watchdog); - -/* - * Suspend/resume support - */ -#ifdef CONFIG_PM - -static int nmi_pm_active; /* nmi_active before suspend */ - -static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) -{ - /* only CPU0 goes here, other CPUs should be offline */ - nmi_pm_active = atomic_read(&nmi_active); - stop_apic_nmi_watchdog(NULL); - BUG_ON(atomic_read(&nmi_active) != 0); - return 0; -} - -static int lapic_nmi_resume(struct sys_device *dev) -{ - /* only CPU0 goes here, other CPUs should be offline */ - if (nmi_pm_active > 0) { - setup_apic_nmi_watchdog(NULL); - touch_nmi_watchdog(); - } - return 0; -} - -static struct sysdev_class nmi_sysclass = { - .name = "lapic_nmi", - .resume = lapic_nmi_resume, - .suspend = lapic_nmi_suspend, -}; - -static struct sys_device device_lapic_nmi = { - .id = 0, - .cls = &nmi_sysclass, -}; - -static int __init init_lapic_nmi_sysfs(void) -{ - int error; - - /* - * should really be a BUG_ON but b/c this is an - * init call, it just doesn't work. -dcz - */ - if (nmi_watchdog != NMI_LOCAL_APIC) - return 0; - - if (atomic_read(&nmi_active) < 0) - return 0; - - error = sysdev_class_register(&nmi_sysclass); - if (!error) - error = sysdev_register(&device_lapic_nmi); - return error; -} - -/* must come after the local APIC's device_initcall() */ -late_initcall(init_lapic_nmi_sysfs); - -#endif /* CONFIG_PM */ - -static void __acpi_nmi_enable(void *__unused) -{ - apic_write(APIC_LVT0, APIC_DM_NMI); -} - -/* - * Enable timer based NMIs on all CPUs: - */ -void acpi_nmi_enable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_enable, NULL, 1); -} - -/* - * Disable timer based NMIs on all CPUs: - */ -void acpi_nmi_disable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_disable, NULL, 1); -} - -/* - * This function is called as soon the LAPIC NMI watchdog driver has everything - * in place and it's ready to check if the NMIs belong to the NMI watchdog - */ -void cpu_nmi_set_wd_enabled(void) -{ - __get_cpu_var(wd_enabled) = 1; -} - -void setup_apic_nmi_watchdog(void *unused) -{ - if (__get_cpu_var(wd_enabled)) - return; - - /* cheap hack to support suspend/resume */ - /* if cpu0 is not active neither should the other cpus */ - if (smp_processor_id() != 0 && atomic_read(&nmi_active) <= 0) - return; - - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - if (lapic_watchdog_init(nmi_hz) < 0) { - __get_cpu_var(wd_enabled) = 0; - return; - } - /* FALL THROUGH */ - case NMI_IO_APIC: - __get_cpu_var(wd_enabled) = 1; - atomic_inc(&nmi_active); - } -} - -void stop_apic_nmi_watchdog(void *unused) -{ - /* only support LOCAL and IO APICs for now */ - if (!nmi_watchdog_active()) - return; - if (__get_cpu_var(wd_enabled) == 0) - return; - if (nmi_watchdog == NMI_LOCAL_APIC) - lapic_watchdog_stop(); - else - __acpi_nmi_disable(NULL); - __get_cpu_var(wd_enabled) = 0; - atomic_dec(&nmi_active); -} - -/* - * the best way to detect whether a CPU has a 'hard lockup' problem - * is to check it's local APIC timer IRQ counts. If they are not - * changing then that CPU has some problem. - * - * as these watchdog NMI IRQs are generated on every CPU, we only - * have to check the current processor. - * - * since NMIs don't listen to _any_ locks, we have to be extremely - * careful not to rely on unsafe variables. The printk might lock - * up though, so we have to break up any console locks first ... - * [when there will be more tty-related locks, break them up here too!] - */ - -static DEFINE_PER_CPU(unsigned, last_irq_sum); -static DEFINE_PER_CPU(long, alert_counter); -static DEFINE_PER_CPU(int, nmi_touch); - -void touch_nmi_watchdog(void) -{ - if (nmi_watchdog_active()) { - unsigned cpu; - - /* - * Tell other CPUs to reset their alert counters. We cannot - * do it ourselves because the alert count increase is not - * atomic. - */ - for_each_present_cpu(cpu) { - if (per_cpu(nmi_touch, cpu) != 1) - per_cpu(nmi_touch, cpu) = 1; - } - } - - /* - * Tickle the softlockup detector too: - */ - touch_softlockup_watchdog(); -} -EXPORT_SYMBOL(touch_nmi_watchdog); - -notrace __kprobes int -nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) -{ - /* - * Since current_thread_info()-> is always on the stack, and we - * always switch the stack NMI-atomically, it's safe to use - * smp_processor_id(). - */ - unsigned int sum; - int touched = 0; - int cpu = smp_processor_id(); - int rc = 0; - - sum = get_timer_irqs(cpu); - - if (__get_cpu_var(nmi_touch)) { - __get_cpu_var(nmi_touch) = 0; - touched = 1; - } - - /* We can be called before check_nmi_watchdog, hence NULL check. */ - if (cpumask_test_cpu(cpu, to_cpumask(backtrace_mask))) { - static DEFINE_RAW_SPINLOCK(lock); /* Serialise the printks */ - - raw_spin_lock(&lock); - printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu); - show_regs(regs); - dump_stack(); - raw_spin_unlock(&lock); - cpumask_clear_cpu(cpu, to_cpumask(backtrace_mask)); - - rc = 1; - } - - /* Could check oops_in_progress here too, but it's safer not to */ - if (mce_in_progress()) - touched = 1; - - /* if the none of the timers isn't firing, this cpu isn't doing much */ - if (!touched && __get_cpu_var(last_irq_sum) == sum) { - /* - * Ayiee, looks like this CPU is stuck ... - * wait a few IRQs (5 seconds) before doing the oops ... - */ - __this_cpu_inc(alert_counter); - if (__this_cpu_read(alert_counter) == 5 * nmi_hz) - /* - * die_nmi will return ONLY if NOTIFY_STOP happens.. - */ - die_nmi("BUG: NMI Watchdog detected LOCKUP", - regs, panic_on_timeout); - } else { - __get_cpu_var(last_irq_sum) = sum; - __this_cpu_write(alert_counter, 0); - } - - /* see if the nmi watchdog went off */ - if (!__get_cpu_var(wd_enabled)) - return rc; - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - rc |= lapic_wd_event(nmi_hz); - break; - case NMI_IO_APIC: - /* - * don't know how to accurately check for this. - * just assume it was a watchdog timer interrupt - * This matches the old behaviour. - */ - rc = 1; - break; - } - return rc; -} - -#ifdef CONFIG_SYSCTL - -static void enable_ioapic_nmi_watchdog_single(void *unused) -{ - __get_cpu_var(wd_enabled) = 1; - atomic_inc(&nmi_active); - __acpi_nmi_enable(NULL); -} - -static void enable_ioapic_nmi_watchdog(void) -{ - on_each_cpu(enable_ioapic_nmi_watchdog_single, NULL, 1); - touch_nmi_watchdog(); -} - -static void disable_ioapic_nmi_watchdog(void) -{ - on_each_cpu(stop_apic_nmi_watchdog, NULL, 1); -} - -static int __init setup_unknown_nmi_panic(char *str) -{ - unknown_nmi_panic = 1; - return 1; -} -__setup("unknown_nmi_panic", setup_unknown_nmi_panic); - -static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) -{ - unsigned char reason = get_nmi_reason(); - char buf[64]; - - sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(buf, regs, 1); /* Always panic here */ - return 0; -} - -/* - * proc handler for /proc/sys/kernel/nmi - */ -int proc_nmi_enabled(struct ctl_table *table, int write, - void __user *buffer, size_t *length, loff_t *ppos) -{ - int old_state; - - nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0; - old_state = nmi_watchdog_enabled; - proc_dointvec(table, write, buffer, length, ppos); - if (!!old_state == !!nmi_watchdog_enabled) - return 0; - - if (atomic_read(&nmi_active) < 0 || !nmi_watchdog_active()) { - printk(KERN_WARNING - "NMI watchdog is permanently disabled\n"); - return -EIO; - } - - if (nmi_watchdog == NMI_LOCAL_APIC) { - if (nmi_watchdog_enabled) - enable_lapic_nmi_watchdog(); - else - disable_lapic_nmi_watchdog(); - } else if (nmi_watchdog == NMI_IO_APIC) { - if (nmi_watchdog_enabled) - enable_ioapic_nmi_watchdog(); - else - disable_ioapic_nmi_watchdog(); - } else { - printk(KERN_WARNING - "NMI watchdog doesn't know what hardware to touch\n"); - return -EIO; - } - return 0; -} - -#endif /* CONFIG_SYSCTL */ - -int do_nmi_callback(struct pt_regs *regs, int cpu) -{ -#ifdef CONFIG_SYSCTL - if (unknown_nmi_panic) - return unknown_nmi_panic_callback(regs, cpu); -#endif - return 0; -} - -void arch_trigger_all_cpu_backtrace(void) -{ - int i; - - cpumask_copy(to_cpumask(backtrace_mask), cpu_online_mask); - - printk(KERN_INFO "sending NMI to all CPUs:\n"); - apic->send_IPI_all(NMI_VECTOR); - - /* Wait for up to 10 seconds for all CPUs to do the backtrace */ - for (i = 0; i < 10 * 1000; i++) { - if (cpumask_empty(to_cpumask(backtrace_mask))) - break; - mdelay(1); - } -} diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c index f9e4e6a54073..d8c4a6feb286 100644 --- a/arch/x86/kernel/apic/probe_64.c +++ b/arch/x86/kernel/apic/probe_64.c @@ -79,13 +79,6 @@ void __init default_setup_apic_routing(void) /* need to update phys_pkg_id */ apic->phys_pkg_id = apicid_phys_pkg_id; } - - /* - * Now that apic routing model is selected, configure the - * fault handling for intr remapping. - */ - if (intr_remapping_enabled) - enable_drhd_fault_handling(); } /* Same for both flat and physical. */ diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 194539aea175..2a3f2a7db243 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -44,8 +44,20 @@ static u64 gru_start_paddr, gru_end_paddr; static union uvh_apicid uvh_apicid; int uv_min_hub_revision_id; EXPORT_SYMBOL_GPL(uv_min_hub_revision_id); +unsigned int uv_apicid_hibits; +EXPORT_SYMBOL_GPL(uv_apicid_hibits); static DEFINE_SPINLOCK(uv_nmi_lock); +static unsigned long __init uv_early_read_mmr(unsigned long addr) +{ + unsigned long val, *mmr; + + mmr = early_ioremap(UV_LOCAL_MMR_BASE | addr, sizeof(*mmr)); + val = *mmr; + early_iounmap(mmr, sizeof(*mmr)); + return val; +} + static inline bool is_GRU_range(u64 start, u64 end) { return start >= gru_start_paddr && end <= gru_end_paddr; @@ -56,28 +68,24 @@ static bool uv_is_untracked_pat_range(u64 start, u64 end) return is_ISA_range(start, end) || is_GRU_range(start, end); } -static int early_get_nodeid(void) +static int __init early_get_pnodeid(void) { union uvh_node_id_u node_id; - unsigned long *mmr; - - mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr)); - node_id.v = *mmr; - early_iounmap(mmr, sizeof(*mmr)); + union uvh_rh_gam_config_mmr_u m_n_config; + int pnode; /* Currently, all blades have same revision number */ + node_id.v = uv_early_read_mmr(UVH_NODE_ID); + m_n_config.v = uv_early_read_mmr(UVH_RH_GAM_CONFIG_MMR); uv_min_hub_revision_id = node_id.s.revision; - return node_id.s.node_id; + pnode = (node_id.s.node_id >> 1) & ((1 << m_n_config.s.n_skt) - 1); + return pnode; } static void __init early_get_apic_pnode_shift(void) { - unsigned long *mmr; - - mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_APICID, sizeof(*mmr)); - uvh_apicid.v = *mmr; - early_iounmap(mmr, sizeof(*mmr)); + uvh_apicid.v = uv_early_read_mmr(UVH_APICID); if (!uvh_apicid.v) /* * Old bios, use default value @@ -85,12 +93,25 @@ static void __init early_get_apic_pnode_shift(void) uvh_apicid.s.pnode_shift = UV_APIC_PNODE_SHIFT; } +/* + * Add an extra bit as dictated by bios to the destination apicid of + * interrupts potentially passing through the UV HUB. This prevents + * a deadlock between interrupts and IO port operations. + */ +static void __init uv_set_apicid_hibit(void) +{ + union uvh_lb_target_physical_apic_id_mask_u apicid_mask; + + apicid_mask.v = uv_early_read_mmr(UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK); + uv_apicid_hibits = apicid_mask.s.bit_enables & UV_APICID_HIBIT_MASK; +} + static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { - int nodeid; + int pnodeid; if (!strcmp(oem_id, "SGI")) { - nodeid = early_get_nodeid(); + pnodeid = early_get_pnodeid(); early_get_apic_pnode_shift(); x86_platform.is_untracked_pat_range = uv_is_untracked_pat_range; x86_platform.nmi_init = uv_nmi_init; @@ -100,8 +121,9 @@ static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) uv_system_type = UV_X2APIC; else if (!strcmp(oem_table_id, "UVH")) { __get_cpu_var(x2apic_extra_bits) = - nodeid << (uvh_apicid.s.pnode_shift - 1); + pnodeid << uvh_apicid.s.pnode_shift; uv_system_type = UV_NON_UNIQUE_APIC; + uv_set_apicid_hibit(); return 1; } } @@ -155,6 +177,7 @@ static int __cpuinit uv_wakeup_secondary(int phys_apicid, unsigned long start_ri int pnode; pnode = uv_apicid_to_pnode(phys_apicid); + phys_apicid |= uv_apicid_hibits; val = (1UL << UVH_IPI_INT_SEND_SHFT) | (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) | ((start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) | @@ -236,7 +259,7 @@ static unsigned int uv_cpu_mask_to_apicid(const struct cpumask *cpumask) int cpu = cpumask_first(cpumask); if ((unsigned)cpu < nr_cpu_ids) - return per_cpu(x86_cpu_to_apicid, cpu); + return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits; else return BAD_APICID; } @@ -255,7 +278,7 @@ uv_cpu_mask_to_apicid_and(const struct cpumask *cpumask, if (cpumask_test_cpu(cpu, cpu_online_mask)) break; } - return per_cpu(x86_cpu_to_apicid, cpu); + return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits; } static unsigned int x2apic_get_apic_id(unsigned long x) @@ -661,27 +684,32 @@ void uv_nmi_init(void) void __init uv_system_init(void) { union uvh_rh_gam_config_mmr_u m_n_config; + union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh; union uvh_node_id_u node_id; unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size; - int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val; + int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val, n_io; int gnode_extra, max_pnode = 0; unsigned long mmr_base, present, paddr; - unsigned short pnode_mask; + unsigned short pnode_mask, pnode_io_mask; map_low_mmrs(); m_n_config.v = uv_read_local_mmr(UVH_RH_GAM_CONFIG_MMR ); m_val = m_n_config.s.m_skt; n_val = m_n_config.s.n_skt; + mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR); + n_io = mmioh.s.n_io; mmr_base = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) & ~UV_MMR_ENABLE; pnode_mask = (1 << n_val) - 1; + pnode_io_mask = (1 << n_io) - 1; + node_id.v = uv_read_local_mmr(UVH_NODE_ID); gnode_extra = (node_id.s.node_id & ~((1 << n_val) - 1)) >> 1; gnode_upper = ((unsigned long)gnode_extra << m_val); - printk(KERN_DEBUG "UV: N %d, M %d, gnode_upper 0x%lx, gnode_extra 0x%x\n", - n_val, m_val, gnode_upper, gnode_extra); + printk(KERN_INFO "UV: N %d, M %d, N_IO: %d, gnode_upper 0x%lx, gnode_extra 0x%x, pnode_mask 0x%x, pnode_io_mask 0x%x\n", + n_val, m_val, n_io, gnode_upper, gnode_extra, pnode_mask, pnode_io_mask); printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base); @@ -714,7 +742,7 @@ void __init uv_system_init(void) for (j = 0; j < 64; j++) { if (!test_bit(j, &present)) continue; - pnode = (i * 64 + j); + pnode = (i * 64 + j) & pnode_mask; uv_blade_info[blade].pnode = pnode; uv_blade_info[blade].nr_possible_cpus = 0; uv_blade_info[blade].nr_online_cpus = 0; @@ -735,6 +763,7 @@ void __init uv_system_init(void) /* * apic_pnode_shift must be set before calling uv_apicid_to_pnode(); */ + uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask; uv_cpu_hub_info(cpu)->apic_pnode_shift = uvh_apicid.s.pnode_shift; pnode = uv_apicid_to_pnode(apicid); blade = boot_pnode_to_blade(pnode); @@ -751,7 +780,6 @@ void __init uv_system_init(void) uv_cpu_hub_info(cpu)->numa_blade_id = blade; uv_cpu_hub_info(cpu)->blade_processor_id = lcpu; uv_cpu_hub_info(cpu)->pnode = pnode; - uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask; uv_cpu_hub_info(cpu)->gpa_mask = (1UL << (m_val + n_val)) - 1; uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper; uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra; @@ -775,7 +803,7 @@ void __init uv_system_init(void) map_gru_high(max_pnode); map_mmr_high(max_pnode); - map_mmioh_high(max_pnode); + map_mmioh_high(max_pnode & pnode_io_mask); uv_cpu_init(); uv_scir_register_cpu_notifier(); diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 4b68bda30938..1d59834396bd 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -894,7 +894,6 @@ void __init identify_boot_cpu(void) #else vgetcpu_set_mode(); #endif - init_hw_perf_events(); } void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c) diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 17ad03366211..9ecf81f9b90f 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -149,8 +149,7 @@ union _cpuid4_leaf_ecx { }; struct amd_l3_cache { - struct pci_dev *dev; - bool can_disable; + struct amd_northbridge *nb; unsigned indices; u8 subcaches[4]; }; @@ -311,14 +310,12 @@ struct _cache_attr { /* * L3 cache descriptors */ -static struct amd_l3_cache **__cpuinitdata l3_caches; - static void __cpuinit amd_calc_l3_indices(struct amd_l3_cache *l3) { unsigned int sc0, sc1, sc2, sc3; u32 val = 0; - pci_read_config_dword(l3->dev, 0x1C4, &val); + pci_read_config_dword(l3->nb->misc, 0x1C4, &val); /* calculate subcache sizes */ l3->subcaches[0] = sc0 = !(val & BIT(0)); @@ -330,47 +327,14 @@ static void __cpuinit amd_calc_l3_indices(struct amd_l3_cache *l3) l3->indices = (max(max3(sc0, sc1, sc2), sc3) << 10) - 1; } -static struct amd_l3_cache * __cpuinit amd_init_l3_cache(int node) -{ - struct amd_l3_cache *l3; - struct pci_dev *dev = node_to_k8_nb_misc(node); - - l3 = kzalloc(sizeof(struct amd_l3_cache), GFP_ATOMIC); - if (!l3) { - printk(KERN_WARNING "Error allocating L3 struct\n"); - return NULL; - } - - l3->dev = dev; - - amd_calc_l3_indices(l3); - - return l3; -} - -static void __cpuinit amd_check_l3_disable(struct _cpuid4_info_regs *this_leaf, - int index) +static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf, + int index) { + static struct amd_l3_cache *__cpuinitdata l3_caches; int node; - if (boot_cpu_data.x86 != 0x10) - return; - - if (index < 3) - return; - - /* see errata #382 and #388 */ - if (boot_cpu_data.x86_model < 0x8) - return; - - if ((boot_cpu_data.x86_model == 0x8 || - boot_cpu_data.x86_model == 0x9) - && - boot_cpu_data.x86_mask < 0x1) - return; - - /* not in virtualized environments */ - if (k8_northbridges.num == 0) + /* only for L3, and not in virtualized environments */ + if (index < 3 || amd_nb_num() == 0) return; /* @@ -378,7 +342,7 @@ static void __cpuinit amd_check_l3_disable(struct _cpuid4_info_regs *this_leaf, * never freed but this is done only on shutdown so it doesn't matter. */ if (!l3_caches) { - int size = k8_northbridges.num * sizeof(struct amd_l3_cache *); + int size = amd_nb_num() * sizeof(struct amd_l3_cache); l3_caches = kzalloc(size, GFP_ATOMIC); if (!l3_caches) @@ -387,14 +351,12 @@ static void __cpuinit amd_check_l3_disable(struct _cpuid4_info_regs *this_leaf, node = amd_get_nb_id(smp_processor_id()); - if (!l3_caches[node]) { - l3_caches[node] = amd_init_l3_cache(node); - l3_caches[node]->can_disable = true; + if (!l3_caches[node].nb) { + l3_caches[node].nb = node_to_amd_nb(node); + amd_calc_l3_indices(&l3_caches[node]); } - WARN_ON(!l3_caches[node]); - - this_leaf->l3 = l3_caches[node]; + this_leaf->l3 = &l3_caches[node]; } /* @@ -408,7 +370,7 @@ int amd_get_l3_disable_slot(struct amd_l3_cache *l3, unsigned slot) { unsigned int reg = 0; - pci_read_config_dword(l3->dev, 0x1BC + slot * 4, ®); + pci_read_config_dword(l3->nb->misc, 0x1BC + slot * 4, ®); /* check whether this slot is activated already */ if (reg & (3UL << 30)) @@ -422,7 +384,8 @@ static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf, { int index; - if (!this_leaf->l3 || !this_leaf->l3->can_disable) + if (!this_leaf->l3 || + !amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE)) return -EINVAL; index = amd_get_l3_disable_slot(this_leaf->l3, slot); @@ -457,7 +420,7 @@ static void amd_l3_disable_index(struct amd_l3_cache *l3, int cpu, if (!l3->subcaches[i]) continue; - pci_write_config_dword(l3->dev, 0x1BC + slot * 4, reg); + pci_write_config_dword(l3->nb->misc, 0x1BC + slot * 4, reg); /* * We need to WBINVD on a core on the node containing the L3 @@ -467,7 +430,7 @@ static void amd_l3_disable_index(struct amd_l3_cache *l3, int cpu, wbinvd_on_cpu(cpu); reg |= BIT(31); - pci_write_config_dword(l3->dev, 0x1BC + slot * 4, reg); + pci_write_config_dword(l3->nb->misc, 0x1BC + slot * 4, reg); } } @@ -524,7 +487,8 @@ static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf, if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (!this_leaf->l3 || !this_leaf->l3->can_disable) + if (!this_leaf->l3 || + !amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE)) return -EINVAL; cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map)); @@ -545,7 +509,7 @@ static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf, #define STORE_CACHE_DISABLE(slot) \ static ssize_t \ store_cache_disable_##slot(struct _cpuid4_info *this_leaf, \ - const char *buf, size_t count) \ + const char *buf, size_t count) \ { \ return store_cache_disable(this_leaf, buf, count, slot); \ } @@ -558,10 +522,7 @@ static struct _cache_attr cache_disable_1 = __ATTR(cache_disable_1, 0644, show_cache_disable_1, store_cache_disable_1); #else /* CONFIG_AMD_NB */ -static void __cpuinit -amd_check_l3_disable(struct _cpuid4_info_regs *this_leaf, int index) -{ -}; +#define amd_init_l3_cache(x, y) #endif /* CONFIG_AMD_NB */ static int @@ -575,7 +536,7 @@ __cpuinit cpuid4_cache_lookup_regs(int index, if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) { amd_cpuid4(index, &eax, &ebx, &ecx); - amd_check_l3_disable(this_leaf, index); + amd_init_l3_cache(this_leaf, index); } else { cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx); } @@ -983,30 +944,48 @@ define_one_ro(size); define_one_ro(shared_cpu_map); define_one_ro(shared_cpu_list); -#define DEFAULT_SYSFS_CACHE_ATTRS \ - &type.attr, \ - &level.attr, \ - &coherency_line_size.attr, \ - &physical_line_partition.attr, \ - &ways_of_associativity.attr, \ - &number_of_sets.attr, \ - &size.attr, \ - &shared_cpu_map.attr, \ - &shared_cpu_list.attr - static struct attribute *default_attrs[] = { - DEFAULT_SYSFS_CACHE_ATTRS, + &type.attr, + &level.attr, + &coherency_line_size.attr, + &physical_line_partition.attr, + &ways_of_associativity.attr, + &number_of_sets.attr, + &size.attr, + &shared_cpu_map.attr, + &shared_cpu_list.attr, NULL }; -static struct attribute *default_l3_attrs[] = { - DEFAULT_SYSFS_CACHE_ATTRS, #ifdef CONFIG_AMD_NB - &cache_disable_0.attr, - &cache_disable_1.attr, +static struct attribute ** __cpuinit amd_l3_attrs(void) +{ + static struct attribute **attrs; + int n; + + if (attrs) + return attrs; + + n = sizeof (default_attrs) / sizeof (struct attribute *); + + if (amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE)) + n += 2; + + attrs = kzalloc(n * sizeof (struct attribute *), GFP_KERNEL); + if (attrs == NULL) + return attrs = default_attrs; + + for (n = 0; default_attrs[n]; n++) + attrs[n] = default_attrs[n]; + + if (amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE)) { + attrs[n++] = &cache_disable_0.attr; + attrs[n++] = &cache_disable_1.attr; + } + + return attrs; +} #endif - NULL -}; static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf) { @@ -1117,11 +1096,11 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) this_leaf = CPUID4_INFO_IDX(cpu, i); - if (this_leaf->l3 && this_leaf->l3->can_disable) - ktype_cache.default_attrs = default_l3_attrs; - else - ktype_cache.default_attrs = default_attrs; - + ktype_cache.default_attrs = default_attrs; +#ifdef CONFIG_AMD_NB + if (this_leaf->l3) + ktype_cache.default_attrs = amd_l3_attrs(); +#endif retval = kobject_init_and_add(&(this_object->kobj), &ktype_cache, per_cpu(ici_cache_kobject, cpu), diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c index 80c482382d5c..5bf2fac52aca 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -31,8 +31,6 @@ #include <asm/mce.h> #include <asm/msr.h> -#define PFX "mce_threshold: " -#define VERSION "version 1.1.1" #define NR_BANKS 6 #define NR_BLOCKS 9 #define THRESHOLD_MAX 0xFFF @@ -59,12 +57,6 @@ struct threshold_block { struct list_head miscj; }; -/* defaults used early on boot */ -static struct threshold_block threshold_defaults = { - .interrupt_enable = 0, - .threshold_limit = THRESHOLD_MAX, -}; - struct threshold_bank { struct kobject *kobj; struct threshold_block *blocks; @@ -89,50 +81,101 @@ static void amd_threshold_interrupt(void); struct thresh_restart { struct threshold_block *b; int reset; + int set_lvt_off; + int lvt_off; u16 old_limit; }; +static int lvt_off_valid(struct threshold_block *b, int apic, u32 lo, u32 hi) +{ + int msr = (hi & MASK_LVTOFF_HI) >> 20; + + if (apic < 0) { + pr_err(FW_BUG "cpu %d, failed to setup threshold interrupt " + "for bank %d, block %d (MSR%08X=0x%x%08x)\n", b->cpu, + b->bank, b->block, b->address, hi, lo); + return 0; + } + + if (apic != msr) { + pr_err(FW_BUG "cpu %d, invalid threshold interrupt offset %d " + "for bank %d, block %d (MSR%08X=0x%x%08x)\n", + b->cpu, apic, b->bank, b->block, b->address, hi, lo); + return 0; + } + + return 1; +}; + /* must be called with correct cpu affinity */ /* Called via smp_call_function_single() */ static void threshold_restart_bank(void *_tr) { struct thresh_restart *tr = _tr; - u32 mci_misc_hi, mci_misc_lo; + u32 hi, lo; - rdmsr(tr->b->address, mci_misc_lo, mci_misc_hi); + rdmsr(tr->b->address, lo, hi); - if (tr->b->threshold_limit < (mci_misc_hi & THRESHOLD_MAX)) + if (tr->b->threshold_limit < (hi & THRESHOLD_MAX)) tr->reset = 1; /* limit cannot be lower than err count */ if (tr->reset) { /* reset err count and overflow bit */ - mci_misc_hi = - (mci_misc_hi & ~(MASK_ERR_COUNT_HI | MASK_OVERFLOW_HI)) | + hi = + (hi & ~(MASK_ERR_COUNT_HI | MASK_OVERFLOW_HI)) | (THRESHOLD_MAX - tr->b->threshold_limit); } else if (tr->old_limit) { /* change limit w/o reset */ - int new_count = (mci_misc_hi & THRESHOLD_MAX) + + int new_count = (hi & THRESHOLD_MAX) + (tr->old_limit - tr->b->threshold_limit); - mci_misc_hi = (mci_misc_hi & ~MASK_ERR_COUNT_HI) | + hi = (hi & ~MASK_ERR_COUNT_HI) | (new_count & THRESHOLD_MAX); } + if (tr->set_lvt_off) { + if (lvt_off_valid(tr->b, tr->lvt_off, lo, hi)) { + /* set new lvt offset */ + hi &= ~MASK_LVTOFF_HI; + hi |= tr->lvt_off << 20; + } + } + tr->b->interrupt_enable ? - (mci_misc_hi = (mci_misc_hi & ~MASK_INT_TYPE_HI) | INT_TYPE_APIC) : - (mci_misc_hi &= ~MASK_INT_TYPE_HI); + (hi = (hi & ~MASK_INT_TYPE_HI) | INT_TYPE_APIC) : + (hi &= ~MASK_INT_TYPE_HI); - mci_misc_hi |= MASK_COUNT_EN_HI; - wrmsr(tr->b->address, mci_misc_lo, mci_misc_hi); + hi |= MASK_COUNT_EN_HI; + wrmsr(tr->b->address, lo, hi); +} + +static void mce_threshold_block_init(struct threshold_block *b, int offset) +{ + struct thresh_restart tr = { + .b = b, + .set_lvt_off = 1, + .lvt_off = offset, + }; + + b->threshold_limit = THRESHOLD_MAX; + threshold_restart_bank(&tr); +}; + +static int setup_APIC_mce(int reserved, int new) +{ + if (reserved < 0 && !setup_APIC_eilvt(new, THRESHOLD_APIC_VECTOR, + APIC_EILVT_MSG_FIX, 0)) + return new; + + return reserved; } /* cpu init entry point, called from mce.c with preempt off */ void mce_amd_feature_init(struct cpuinfo_x86 *c) { + struct threshold_block b; unsigned int cpu = smp_processor_id(); u32 low = 0, high = 0, address = 0; unsigned int bank, block; - struct thresh_restart tr; - int lvt_off = -1; - u8 offset; + int offset = -1; for (bank = 0; bank < NR_BANKS; ++bank) { for (block = 0; block < NR_BLOCKS; ++block) { @@ -163,39 +206,16 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c) if (shared_bank[bank] && c->cpu_core_id) break; #endif - offset = (high & MASK_LVTOFF_HI) >> 20; - if (lvt_off < 0) { - if (setup_APIC_eilvt(offset, - THRESHOLD_APIC_VECTOR, - APIC_EILVT_MSG_FIX, 0)) { - pr_err(FW_BUG "cpu %d, failed to " - "setup threshold interrupt " - "for bank %d, block %d " - "(MSR%08X=0x%x%08x)", - smp_processor_id(), bank, block, - address, high, low); - continue; - } - lvt_off = offset; - } else if (lvt_off != offset) { - pr_err(FW_BUG "cpu %d, invalid threshold " - "interrupt offset %d for bank %d," - "block %d (MSR%08X=0x%x%08x)", - smp_processor_id(), lvt_off, bank, - block, address, high, low); - continue; - } - - high &= ~MASK_LVTOFF_HI; - high |= lvt_off << 20; - wrmsr(address, low, high); + offset = setup_APIC_mce(offset, + (high & MASK_LVTOFF_HI) >> 20); - threshold_defaults.address = address; - tr.b = &threshold_defaults; - tr.reset = 0; - tr.old_limit = 0; - threshold_restart_bank(&tr); + memset(&b, 0, sizeof(b)); + b.cpu = cpu; + b.bank = bank; + b.block = block; + b.address = address; + mce_threshold_block_init(&b, offset); mce_threshold_vector = amd_threshold_interrupt; } } @@ -298,9 +318,8 @@ store_interrupt_enable(struct threshold_block *b, const char *buf, size_t size) b->interrupt_enable = !!new; + memset(&tr, 0, sizeof(tr)); tr.b = b; - tr.reset = 0; - tr.old_limit = 0; smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1); @@ -321,10 +340,10 @@ store_threshold_limit(struct threshold_block *b, const char *buf, size_t size) if (new < 1) new = 1; + memset(&tr, 0, sizeof(tr)); tr.old_limit = b->threshold_limit; b->threshold_limit = new; tr.b = b; - tr.reset = 0; smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1); @@ -603,9 +622,9 @@ static __cpuinit int threshold_create_device(unsigned int cpu) continue; err = threshold_create_bank(cpu, bank); if (err) - goto out; + return err; } -out: + return err; } diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index 4b683267eca5..e12246ff5aa6 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -53,8 +53,13 @@ struct thermal_state { struct _thermal_state core_power_limit; struct _thermal_state package_throttle; struct _thermal_state package_power_limit; + struct _thermal_state core_thresh0; + struct _thermal_state core_thresh1; }; +/* Callback to handle core threshold interrupts */ +int (*platform_thermal_notify)(__u64 msr_val); + static DEFINE_PER_CPU(struct thermal_state, thermal_state); static atomic_t therm_throt_en = ATOMIC_INIT(0); @@ -200,6 +205,22 @@ static int therm_throt_process(bool new_event, int event, int level) return 0; } +static int thresh_event_valid(int event) +{ + struct _thermal_state *state; + unsigned int this_cpu = smp_processor_id(); + struct thermal_state *pstate = &per_cpu(thermal_state, this_cpu); + u64 now = get_jiffies_64(); + + state = (event == 0) ? &pstate->core_thresh0 : &pstate->core_thresh1; + + if (time_before64(now, state->next_check)) + return 0; + + state->next_check = now + CHECK_INTERVAL; + return 1; +} + #ifdef CONFIG_SYSFS /* Add/Remove thermal_throttle interface for CPU device: */ static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev, @@ -313,6 +334,22 @@ device_initcall(thermal_throttle_init_device); #define PACKAGE_THROTTLED ((__u64)2 << 62) #define PACKAGE_POWER_LIMIT ((__u64)3 << 62) +static void notify_thresholds(__u64 msr_val) +{ + /* check whether the interrupt handler is defined; + * otherwise simply return + */ + if (!platform_thermal_notify) + return; + + /* lower threshold reached */ + if ((msr_val & THERM_LOG_THRESHOLD0) && thresh_event_valid(0)) + platform_thermal_notify(msr_val); + /* higher threshold reached */ + if ((msr_val & THERM_LOG_THRESHOLD1) && thresh_event_valid(1)) + platform_thermal_notify(msr_val); +} + /* Thermal transition interrupt handler */ static void intel_thermal_interrupt(void) { @@ -321,6 +358,9 @@ static void intel_thermal_interrupt(void) rdmsrl(MSR_IA32_THERM_STATUS, msr_val); + /* Check for violation of core thermal thresholds*/ + notify_thresholds(msr_val); + if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT, THERMAL_THROTTLING_EVENT, CORE_LEVEL) != 0) diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index ed6310183efb..0a360d146596 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -330,9 +330,6 @@ static bool reserve_pmc_hardware(void) { int i; - if (nmi_watchdog == NMI_LOCAL_APIC) - disable_lapic_nmi_watchdog(); - for (i = 0; i < x86_pmu.num_counters; i++) { if (!reserve_perfctr_nmi(x86_pmu.perfctr + i)) goto perfctr_fail; @@ -355,9 +352,6 @@ perfctr_fail: for (i--; i >= 0; i--) release_perfctr_nmi(x86_pmu.perfctr + i); - if (nmi_watchdog == NMI_LOCAL_APIC) - enable_lapic_nmi_watchdog(); - return false; } @@ -369,9 +363,6 @@ static void release_pmc_hardware(void) release_perfctr_nmi(x86_pmu.perfctr + i); release_evntsel_nmi(x86_pmu.eventsel + i); } - - if (nmi_watchdog == NMI_LOCAL_APIC) - enable_lapic_nmi_watchdog(); } #else @@ -381,6 +372,58 @@ static void release_pmc_hardware(void) {} #endif +static bool check_hw_exists(void) +{ + u64 val, val_new = 0; + int i, reg, ret = 0; + + /* + * Check to see if the BIOS enabled any of the counters, if so + * complain and bail. + */ + for (i = 0; i < x86_pmu.num_counters; i++) { + reg = x86_pmu.eventsel + i; + ret = rdmsrl_safe(reg, &val); + if (ret) + goto msr_fail; + if (val & ARCH_PERFMON_EVENTSEL_ENABLE) + goto bios_fail; + } + + if (x86_pmu.num_counters_fixed) { + reg = MSR_ARCH_PERFMON_FIXED_CTR_CTRL; + ret = rdmsrl_safe(reg, &val); + if (ret) + goto msr_fail; + for (i = 0; i < x86_pmu.num_counters_fixed; i++) { + if (val & (0x03 << i*4)) + goto bios_fail; + } + } + + /* + * Now write a value and read it back to see if it matches, + * this is needed to detect certain hardware emulators (qemu/kvm) + * that don't trap on the MSR access and always return 0s. + */ + val = 0xabcdUL; + ret = checking_wrmsrl(x86_pmu.perfctr, val); + ret |= rdmsrl_safe(x86_pmu.perfctr, &val_new); + if (ret || val != val_new) + goto msr_fail; + + return true; + +bios_fail: + printk(KERN_CONT "Broken BIOS detected, using software events only.\n"); + printk(KERN_ERR FW_BUG "the BIOS has corrupted hw-PMU resources (MSR %x is %Lx)\n", reg, val); + return false; + +msr_fail: + printk(KERN_CONT "Broken PMU hardware detected, using software events only.\n"); + return false; +} + static void reserve_ds_buffers(void); static void release_ds_buffers(void); @@ -437,7 +480,7 @@ static int x86_setup_perfctr(struct perf_event *event) struct hw_perf_event *hwc = &event->hw; u64 config; - if (!hwc->sample_period) { + if (!is_sampling_event(event)) { hwc->sample_period = x86_pmu.max_period; hwc->last_period = hwc->sample_period; local64_set(&hwc->period_left, hwc->sample_period); @@ -1348,7 +1391,7 @@ static void __init pmu_check_apic(void) pr_info("no hardware sampling interrupt available.\n"); } -void __init init_hw_perf_events(void) +int __init init_hw_perf_events(void) { struct event_constraint *c; int err; @@ -1363,15 +1406,19 @@ void __init init_hw_perf_events(void) err = amd_pmu_init(); break; default: - return; + return 0; } if (err != 0) { pr_cont("no PMU driver, software events only.\n"); - return; + return 0; } pmu_check_apic(); + /* sanity check that the hardware exists or is emulated */ + if (!check_hw_exists()) + return 0; + pr_cont("%s PMU driver.\n", x86_pmu.name); if (x86_pmu.quirks) @@ -1418,9 +1465,12 @@ void __init init_hw_perf_events(void) pr_info("... fixed-purpose events: %d\n", x86_pmu.num_counters_fixed); pr_info("... event mask: %016Lx\n", x86_pmu.intel_ctrl); - perf_pmu_register(&pmu); + perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW); perf_cpu_notifier(x86_pmu_notifier); + + return 0; } +early_initcall(init_hw_perf_events); static inline void x86_pmu_read(struct perf_event *event) { @@ -1666,7 +1716,7 @@ perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs) perf_callchain_store(entry, regs->ip); - dump_trace(NULL, regs, NULL, regs->bp, &backtrace_ops, entry); + dump_trace(NULL, regs, NULL, &backtrace_ops, entry); } #ifdef CONFIG_COMPAT diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c index e421b8cd6944..67e2202a6039 100644 --- a/arch/x86/kernel/cpu/perf_event_amd.c +++ b/arch/x86/kernel/cpu/perf_event_amd.c @@ -1,7 +1,5 @@ #ifdef CONFIG_CPU_SUP_AMD -static DEFINE_RAW_SPINLOCK(amd_nb_lock); - static __initconst const u64 amd_hw_cache_event_ids [PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] @@ -275,7 +273,7 @@ done: return &emptyconstraint; } -static struct amd_nb *amd_alloc_nb(int cpu, int nb_id) +static struct amd_nb *amd_alloc_nb(int cpu) { struct amd_nb *nb; int i; @@ -285,7 +283,7 @@ static struct amd_nb *amd_alloc_nb(int cpu, int nb_id) if (!nb) return NULL; - nb->nb_id = nb_id; + nb->nb_id = -1; /* * initialize all possible NB constraints @@ -306,7 +304,7 @@ static int amd_pmu_cpu_prepare(int cpu) if (boot_cpu_data.x86_max_cores < 2) return NOTIFY_OK; - cpuc->amd_nb = amd_alloc_nb(cpu, -1); + cpuc->amd_nb = amd_alloc_nb(cpu); if (!cpuc->amd_nb) return NOTIFY_BAD; @@ -325,8 +323,6 @@ static void amd_pmu_cpu_starting(int cpu) nb_id = amd_get_nb_id(cpu); WARN_ON_ONCE(nb_id == BAD_APICID); - raw_spin_lock(&amd_nb_lock); - for_each_online_cpu(i) { nb = per_cpu(cpu_hw_events, i).amd_nb; if (WARN_ON_ONCE(!nb)) @@ -341,8 +337,6 @@ static void amd_pmu_cpu_starting(int cpu) cpuc->amd_nb->nb_id = nb_id; cpuc->amd_nb->refcnt++; - - raw_spin_unlock(&amd_nb_lock); } static void amd_pmu_cpu_dead(int cpu) @@ -354,8 +348,6 @@ static void amd_pmu_cpu_dead(int cpu) cpuhw = &per_cpu(cpu_hw_events, cpu); - raw_spin_lock(&amd_nb_lock); - if (cpuhw->amd_nb) { struct amd_nb *nb = cpuhw->amd_nb; @@ -364,8 +356,6 @@ static void amd_pmu_cpu_dead(int cpu) cpuhw->amd_nb = NULL; } - - raw_spin_unlock(&amd_nb_lock); } static __initconst const struct x86_pmu amd_pmu = { diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index c8f5c088cad1..24e390e40f2e 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -816,6 +816,32 @@ static int intel_pmu_hw_config(struct perf_event *event) if (ret) return ret; + if (event->attr.precise_ip && + (event->hw.config & X86_RAW_EVENT_MASK) == 0x003c) { + /* + * Use an alternative encoding for CPU_CLK_UNHALTED.THREAD_P + * (0x003c) so that we can use it with PEBS. + * + * The regular CPU_CLK_UNHALTED.THREAD_P event (0x003c) isn't + * PEBS capable. However we can use INST_RETIRED.ANY_P + * (0x00c0), which is a PEBS capable event, to get the same + * count. + * + * INST_RETIRED.ANY_P counts the number of cycles that retires + * CNTMASK instructions. By setting CNTMASK to a value (16) + * larger than the maximum number of instructions that can be + * retired per cycle (4) and then inverting the condition, we + * count all cycles that retire 16 or less instructions, which + * is every cycle. + * + * Thereby we gain a PEBS capable cycle counter. + */ + u64 alt_config = 0x108000c0; /* INST_RETIRED.TOTAL_CYCLES */ + + alt_config |= (event->hw.config & ~X86_RAW_EVENT_MASK); + event->hw.config = alt_config; + } + if (event->attr.type != PERF_TYPE_RAW) return 0; diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c index d9f4ff8fcd69..d5a236615501 100644 --- a/arch/x86/kernel/cpu/perfctr-watchdog.c +++ b/arch/x86/kernel/cpu/perfctr-watchdog.c @@ -16,32 +16,12 @@ #include <linux/kernel.h> #include <linux/bitops.h> #include <linux/smp.h> -#include <linux/nmi.h> +#include <asm/nmi.h> #include <linux/kprobes.h> #include <asm/apic.h> #include <asm/perf_event.h> -struct nmi_watchdog_ctlblk { - unsigned int cccr_msr; - unsigned int perfctr_msr; /* the MSR to reset in NMI handler */ - unsigned int evntsel_msr; /* the MSR to select the events to handle */ -}; - -/* Interface defining a CPU specific perfctr watchdog */ -struct wd_ops { - int (*reserve)(void); - void (*unreserve)(void); - int (*setup)(unsigned nmi_hz); - void (*rearm)(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz); - void (*stop)(void); - unsigned perfctr; - unsigned evntsel; - u64 checkbit; -}; - -static const struct wd_ops *wd_ops; - /* * this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's * offset from MSR_P4_BSU_ESCR0. @@ -60,8 +40,6 @@ static const struct wd_ops *wd_ops; static DECLARE_BITMAP(perfctr_nmi_owner, NMI_MAX_COUNTER_BITS); static DECLARE_BITMAP(evntsel_nmi_owner, NMI_MAX_COUNTER_BITS); -static DEFINE_PER_CPU(struct nmi_watchdog_ctlblk, nmi_watchdog_ctlblk); - /* converts an msr to an appropriate reservation bit */ static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr) { @@ -172,623 +150,3 @@ void release_evntsel_nmi(unsigned int msr) clear_bit(counter, evntsel_nmi_owner); } EXPORT_SYMBOL(release_evntsel_nmi); - -void disable_lapic_nmi_watchdog(void) -{ - BUG_ON(nmi_watchdog != NMI_LOCAL_APIC); - - if (atomic_read(&nmi_active) <= 0) - return; - - on_each_cpu(stop_apic_nmi_watchdog, NULL, 1); - - if (wd_ops) - wd_ops->unreserve(); - - BUG_ON(atomic_read(&nmi_active) != 0); -} - -void enable_lapic_nmi_watchdog(void) -{ - BUG_ON(nmi_watchdog != NMI_LOCAL_APIC); - - /* are we already enabled */ - if (atomic_read(&nmi_active) != 0) - return; - - /* are we lapic aware */ - if (!wd_ops) - return; - if (!wd_ops->reserve()) { - printk(KERN_ERR "NMI watchdog: cannot reserve perfctrs\n"); - return; - } - - on_each_cpu(setup_apic_nmi_watchdog, NULL, 1); - touch_nmi_watchdog(); -} - -/* - * Activate the NMI watchdog via the local APIC. - */ - -static unsigned int adjust_for_32bit_ctr(unsigned int hz) -{ - u64 counter_val; - unsigned int retval = hz; - - /* - * On Intel CPUs with P6/ARCH_PERFMON only 32 bits in the counter - * are writable, with higher bits sign extending from bit 31. - * So, we can only program the counter with 31 bit values and - * 32nd bit should be 1, for 33.. to be 1. - * Find the appropriate nmi_hz - */ - counter_val = (u64)cpu_khz * 1000; - do_div(counter_val, retval); - if (counter_val > 0x7fffffffULL) { - u64 count = (u64)cpu_khz * 1000; - do_div(count, 0x7fffffffUL); - retval = count + 1; - } - return retval; -} - -static void write_watchdog_counter(unsigned int perfctr_msr, - const char *descr, unsigned nmi_hz) -{ - u64 count = (u64)cpu_khz * 1000; - - do_div(count, nmi_hz); - if (descr) - pr_debug("setting %s to -0x%08Lx\n", descr, count); - wrmsrl(perfctr_msr, 0 - count); -} - -static void write_watchdog_counter32(unsigned int perfctr_msr, - const char *descr, unsigned nmi_hz) -{ - u64 count = (u64)cpu_khz * 1000; - - do_div(count, nmi_hz); - if (descr) - pr_debug("setting %s to -0x%08Lx\n", descr, count); - wrmsr(perfctr_msr, (u32)(-count), 0); -} - -/* - * AMD K7/K8/Family10h/Family11h support. - * AMD keeps this interface nicely stable so there is not much variety - */ -#define K7_EVNTSEL_ENABLE (1 << 22) -#define K7_EVNTSEL_INT (1 << 20) -#define K7_EVNTSEL_OS (1 << 17) -#define K7_EVNTSEL_USR (1 << 16) -#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76 -#define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING - -static int setup_k7_watchdog(unsigned nmi_hz) -{ - unsigned int perfctr_msr, evntsel_msr; - unsigned int evntsel; - struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - - perfctr_msr = wd_ops->perfctr; - evntsel_msr = wd_ops->evntsel; - - wrmsrl(perfctr_msr, 0UL); - - evntsel = K7_EVNTSEL_INT - | K7_EVNTSEL_OS - | K7_EVNTSEL_USR - | K7_NMI_EVENT; - - /* setup the timer */ - wrmsr(evntsel_msr, evntsel, 0); - write_watchdog_counter(perfctr_msr, "K7_PERFCTR0", nmi_hz); - - /* initialize the wd struct before enabling */ - wd->perfctr_msr = perfctr_msr; - wd->evntsel_msr = evntsel_msr; - wd->cccr_msr = 0; /* unused */ - - /* ok, everything is initialized, announce that we're set */ - cpu_nmi_set_wd_enabled(); - - apic_write(APIC_LVTPC, APIC_DM_NMI); - evntsel |= K7_EVNTSEL_ENABLE; - wrmsr(evntsel_msr, evntsel, 0); - - return 1; -} - -static void single_msr_stop_watchdog(void) -{ - struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - - wrmsr(wd->evntsel_msr, 0, 0); -} - -static int single_msr_reserve(void) -{ - if (!reserve_perfctr_nmi(wd_ops->perfctr)) - return 0; - - if (!reserve_evntsel_nmi(wd_ops->evntsel)) { - release_perfctr_nmi(wd_ops->perfctr); - return 0; - } - return 1; -} - -static void single_msr_unreserve(void) -{ - release_evntsel_nmi(wd_ops->evntsel); - release_perfctr_nmi(wd_ops->perfctr); -} - -static void __kprobes -single_msr_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz) -{ - /* start the cycle over again */ - write_watchdog_counter(wd->perfctr_msr, NULL, nmi_hz); -} - -static const struct wd_ops k7_wd_ops = { - .reserve = single_msr_reserve, - .unreserve = single_msr_unreserve, - .setup = setup_k7_watchdog, - .rearm = single_msr_rearm, - .stop = single_msr_stop_watchdog, - .perfctr = MSR_K7_PERFCTR0, - .evntsel = MSR_K7_EVNTSEL0, - .checkbit = 1ULL << 47, -}; - -/* - * Intel Model 6 (PPro+,P2,P3,P-M,Core1) - */ -#define P6_EVNTSEL0_ENABLE (1 << 22) -#define P6_EVNTSEL_INT (1 << 20) -#define P6_EVNTSEL_OS (1 << 17) -#define P6_EVNTSEL_USR (1 << 16) -#define P6_EVENT_CPU_CLOCKS_NOT_HALTED 0x79 -#define P6_NMI_EVENT P6_EVENT_CPU_CLOCKS_NOT_HALTED - -static int setup_p6_watchdog(unsigned nmi_hz) -{ - unsigned int perfctr_msr, evntsel_msr; - unsigned int evntsel; - struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - - perfctr_msr = wd_ops->perfctr; - evntsel_msr = wd_ops->evntsel; - - /* KVM doesn't implement this MSR */ - if (wrmsr_safe(perfctr_msr, 0, 0) < 0) - return 0; - - evntsel = P6_EVNTSEL_INT - | P6_EVNTSEL_OS - | P6_EVNTSEL_USR - | P6_NMI_EVENT; - - /* setup the timer */ - wrmsr(evntsel_msr, evntsel, 0); - nmi_hz = adjust_for_32bit_ctr(nmi_hz); - write_watchdog_counter32(perfctr_msr, "P6_PERFCTR0", nmi_hz); - - /* initialize the wd struct before enabling */ - wd->perfctr_msr = perfctr_msr; - wd->evntsel_msr = evntsel_msr; - wd->cccr_msr = 0; /* unused */ - - /* ok, everything is initialized, announce that we're set */ - cpu_nmi_set_wd_enabled(); - - apic_write(APIC_LVTPC, APIC_DM_NMI); - evntsel |= P6_EVNTSEL0_ENABLE; - wrmsr(evntsel_msr, evntsel, 0); - - return 1; -} - -static void __kprobes p6_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz) -{ - /* - * P6 based Pentium M need to re-unmask - * the apic vector but it doesn't hurt - * other P6 variant. - * ArchPerfom/Core Duo also needs this - */ - apic_write(APIC_LVTPC, APIC_DM_NMI); - - /* P6/ARCH_PERFMON has 32 bit counter write */ - write_watchdog_counter32(wd->perfctr_msr, NULL, nmi_hz); -} - -static const struct wd_ops p6_wd_ops = { - .reserve = single_msr_reserve, - .unreserve = single_msr_unreserve, - .setup = setup_p6_watchdog, - .rearm = p6_rearm, - .stop = single_msr_stop_watchdog, - .perfctr = MSR_P6_PERFCTR0, - .evntsel = MSR_P6_EVNTSEL0, - .checkbit = 1ULL << 39, -}; - -/* - * Intel P4 performance counters. - * By far the most complicated of all. - */ -#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1 << 7) -#define P4_ESCR_EVENT_SELECT(N) ((N) << 25) -#define P4_ESCR_OS (1 << 3) -#define P4_ESCR_USR (1 << 2) -#define P4_CCCR_OVF_PMI0 (1 << 26) -#define P4_CCCR_OVF_PMI1 (1 << 27) -#define P4_CCCR_THRESHOLD(N) ((N) << 20) -#define P4_CCCR_COMPLEMENT (1 << 19) -#define P4_CCCR_COMPARE (1 << 18) -#define P4_CCCR_REQUIRED (3 << 16) -#define P4_CCCR_ESCR_SELECT(N) ((N) << 13) -#define P4_CCCR_ENABLE (1 << 12) -#define P4_CCCR_OVF (1 << 31) - -#define P4_CONTROLS 18 -static unsigned int p4_controls[18] = { - MSR_P4_BPU_CCCR0, - MSR_P4_BPU_CCCR1, - MSR_P4_BPU_CCCR2, - MSR_P4_BPU_CCCR3, - MSR_P4_MS_CCCR0, - MSR_P4_MS_CCCR1, - MSR_P4_MS_CCCR2, - MSR_P4_MS_CCCR3, - MSR_P4_FLAME_CCCR0, - MSR_P4_FLAME_CCCR1, - MSR_P4_FLAME_CCCR2, - MSR_P4_FLAME_CCCR3, - MSR_P4_IQ_CCCR0, - MSR_P4_IQ_CCCR1, - MSR_P4_IQ_CCCR2, - MSR_P4_IQ_CCCR3, - MSR_P4_IQ_CCCR4, - MSR_P4_IQ_CCCR5, -}; -/* - * Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter - * CRU_ESCR0 (with any non-null event selector) through a complemented - * max threshold. [IA32-Vol3, Section 14.9.9] - */ -static int setup_p4_watchdog(unsigned nmi_hz) -{ - unsigned int perfctr_msr, evntsel_msr, cccr_msr; - unsigned int evntsel, cccr_val; - unsigned int misc_enable, dummy; - unsigned int ht_num; - struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - - rdmsr(MSR_IA32_MISC_ENABLE, misc_enable, dummy); - if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL)) - return 0; - -#ifdef CONFIG_SMP - /* detect which hyperthread we are on */ - if (smp_num_siblings == 2) { - unsigned int ebx, apicid; - - ebx = cpuid_ebx(1); - apicid = (ebx >> 24) & 0xff; - ht_num = apicid & 1; - } else -#endif - ht_num = 0; - - /* - * performance counters are shared resources - * assign each hyperthread its own set - * (re-use the ESCR0 register, seems safe - * and keeps the cccr_val the same) - */ - if (!ht_num) { - /* logical cpu 0 */ - perfctr_msr = MSR_P4_IQ_PERFCTR0; - evntsel_msr = MSR_P4_CRU_ESCR0; - cccr_msr = MSR_P4_IQ_CCCR0; - cccr_val = P4_CCCR_OVF_PMI0 | P4_CCCR_ESCR_SELECT(4); - - /* - * If we're on the kdump kernel or other situation, we may - * still have other performance counter registers set to - * interrupt and they'll keep interrupting forever because - * of the P4_CCCR_OVF quirk. So we need to ACK all the - * pending interrupts and disable all the registers here, - * before reenabling the NMI delivery. Refer to p4_rearm() - * about the P4_CCCR_OVF quirk. - */ - if (reset_devices) { - unsigned int low, high; - int i; - - for (i = 0; i < P4_CONTROLS; i++) { - rdmsr(p4_controls[i], low, high); - low &= ~(P4_CCCR_ENABLE | P4_CCCR_OVF); - wrmsr(p4_controls[i], low, high); - } - } - } else { - /* logical cpu 1 */ - perfctr_msr = MSR_P4_IQ_PERFCTR1; - evntsel_msr = MSR_P4_CRU_ESCR0; - cccr_msr = MSR_P4_IQ_CCCR1; - - /* Pentium 4 D processors don't support P4_CCCR_OVF_PMI1 */ - if (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask == 4) - cccr_val = P4_CCCR_OVF_PMI0; - else - cccr_val = P4_CCCR_OVF_PMI1; - cccr_val |= P4_CCCR_ESCR_SELECT(4); - } - - evntsel = P4_ESCR_EVENT_SELECT(0x3F) - | P4_ESCR_OS - | P4_ESCR_USR; - - cccr_val |= P4_CCCR_THRESHOLD(15) - | P4_CCCR_COMPLEMENT - | P4_CCCR_COMPARE - | P4_CCCR_REQUIRED; - - wrmsr(evntsel_msr, evntsel, 0); - wrmsr(cccr_msr, cccr_val, 0); - write_watchdog_counter(perfctr_msr, "P4_IQ_COUNTER0", nmi_hz); - - wd->perfctr_msr = perfctr_msr; - wd->evntsel_msr = evntsel_msr; - wd->cccr_msr = cccr_msr; - - /* ok, everything is initialized, announce that we're set */ - cpu_nmi_set_wd_enabled(); - - apic_write(APIC_LVTPC, APIC_DM_NMI); - cccr_val |= P4_CCCR_ENABLE; - wrmsr(cccr_msr, cccr_val, 0); - return 1; -} - -static void stop_p4_watchdog(void) -{ - struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - wrmsr(wd->cccr_msr, 0, 0); - wrmsr(wd->evntsel_msr, 0, 0); -} - -static int p4_reserve(void) -{ - if (!reserve_perfctr_nmi(MSR_P4_IQ_PERFCTR0)) - return 0; -#ifdef CONFIG_SMP - if (smp_num_siblings > 1 && !reserve_perfctr_nmi(MSR_P4_IQ_PERFCTR1)) - goto fail1; -#endif - if (!reserve_evntsel_nmi(MSR_P4_CRU_ESCR0)) - goto fail2; - /* RED-PEN why is ESCR1 not reserved here? */ - return 1; - fail2: -#ifdef CONFIG_SMP - if (smp_num_siblings > 1) - release_perfctr_nmi(MSR_P4_IQ_PERFCTR1); - fail1: -#endif - release_perfctr_nmi(MSR_P4_IQ_PERFCTR0); - return 0; -} - -static void p4_unreserve(void) -{ -#ifdef CONFIG_SMP - if (smp_num_siblings > 1) - release_perfctr_nmi(MSR_P4_IQ_PERFCTR1); -#endif - release_evntsel_nmi(MSR_P4_CRU_ESCR0); - release_perfctr_nmi(MSR_P4_IQ_PERFCTR0); -} - -static void __kprobes p4_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz) -{ - unsigned dummy; - /* - * P4 quirks: - * - An overflown perfctr will assert its interrupt - * until the OVF flag in its CCCR is cleared. - * - LVTPC is masked on interrupt and must be - * unmasked by the LVTPC handler. - */ - rdmsrl(wd->cccr_msr, dummy); - dummy &= ~P4_CCCR_OVF; - wrmsrl(wd->cccr_msr, dummy); - apic_write(APIC_LVTPC, APIC_DM_NMI); - /* start the cycle over again */ - write_watchdog_counter(wd->perfctr_msr, NULL, nmi_hz); -} - -static const struct wd_ops p4_wd_ops = { - .reserve = p4_reserve, - .unreserve = p4_unreserve, - .setup = setup_p4_watchdog, - .rearm = p4_rearm, - .stop = stop_p4_watchdog, - /* RED-PEN this is wrong for the other sibling */ - .perfctr = MSR_P4_BPU_PERFCTR0, - .evntsel = MSR_P4_BSU_ESCR0, - .checkbit = 1ULL << 39, -}; - -/* - * Watchdog using the Intel architected PerfMon. - * Used for Core2 and hopefully all future Intel CPUs. - */ -#define ARCH_PERFMON_NMI_EVENT_SEL ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL -#define ARCH_PERFMON_NMI_EVENT_UMASK ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK - -static struct wd_ops intel_arch_wd_ops; - -static int setup_intel_arch_watchdog(unsigned nmi_hz) -{ - unsigned int ebx; - union cpuid10_eax eax; - unsigned int unused; - unsigned int perfctr_msr, evntsel_msr; - unsigned int evntsel; - struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - - /* - * Check whether the Architectural PerfMon supports - * Unhalted Core Cycles Event or not. - * NOTE: Corresponding bit = 0 in ebx indicates event present. - */ - cpuid(10, &(eax.full), &ebx, &unused, &unused); - if ((eax.split.mask_length < - (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) || - (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT)) - return 0; - - perfctr_msr = wd_ops->perfctr; - evntsel_msr = wd_ops->evntsel; - - wrmsrl(perfctr_msr, 0UL); - - evntsel = ARCH_PERFMON_EVENTSEL_INT - | ARCH_PERFMON_EVENTSEL_OS - | ARCH_PERFMON_EVENTSEL_USR - | ARCH_PERFMON_NMI_EVENT_SEL - | ARCH_PERFMON_NMI_EVENT_UMASK; - - /* setup the timer */ - wrmsr(evntsel_msr, evntsel, 0); - nmi_hz = adjust_for_32bit_ctr(nmi_hz); - write_watchdog_counter32(perfctr_msr, "INTEL_ARCH_PERFCTR0", nmi_hz); - - wd->perfctr_msr = perfctr_msr; - wd->evntsel_msr = evntsel_msr; - wd->cccr_msr = 0; /* unused */ - - /* ok, everything is initialized, announce that we're set */ - cpu_nmi_set_wd_enabled(); - - apic_write(APIC_LVTPC, APIC_DM_NMI); - evntsel |= ARCH_PERFMON_EVENTSEL_ENABLE; - wrmsr(evntsel_msr, evntsel, 0); - intel_arch_wd_ops.checkbit = 1ULL << (eax.split.bit_width - 1); - return 1; -} - -static struct wd_ops intel_arch_wd_ops __read_mostly = { - .reserve = single_msr_reserve, - .unreserve = single_msr_unreserve, - .setup = setup_intel_arch_watchdog, - .rearm = p6_rearm, - .stop = single_msr_stop_watchdog, - .perfctr = MSR_ARCH_PERFMON_PERFCTR1, - .evntsel = MSR_ARCH_PERFMON_EVENTSEL1, -}; - -static void probe_nmi_watchdog(void) -{ - switch (boot_cpu_data.x86_vendor) { - case X86_VENDOR_AMD: - if (boot_cpu_data.x86 == 6 || - (boot_cpu_data.x86 >= 0xf && boot_cpu_data.x86 <= 0x15)) - wd_ops = &k7_wd_ops; - return; - case X86_VENDOR_INTEL: - /* Work around where perfctr1 doesn't have a working enable - * bit as described in the following errata: - * AE49 Core Duo and Intel Core Solo 65 nm - * AN49 Intel Pentium Dual-Core - * AF49 Dual-Core Intel Xeon Processor LV - */ - if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 14) || - ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 15 && - boot_cpu_data.x86_mask == 4))) { - intel_arch_wd_ops.perfctr = MSR_ARCH_PERFMON_PERFCTR0; - intel_arch_wd_ops.evntsel = MSR_ARCH_PERFMON_EVENTSEL0; - } - if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { - wd_ops = &intel_arch_wd_ops; - break; - } - switch (boot_cpu_data.x86) { - case 6: - if (boot_cpu_data.x86_model > 13) - return; - - wd_ops = &p6_wd_ops; - break; - case 15: - wd_ops = &p4_wd_ops; - break; - default: - return; - } - break; - } -} - -/* Interface to nmi.c */ - -int lapic_watchdog_init(unsigned nmi_hz) -{ - if (!wd_ops) { - probe_nmi_watchdog(); - if (!wd_ops) { - printk(KERN_INFO "NMI watchdog: CPU not supported\n"); - return -1; - } - - if (!wd_ops->reserve()) { - printk(KERN_ERR - "NMI watchdog: cannot reserve perfctrs\n"); - return -1; - } - } - - if (!(wd_ops->setup(nmi_hz))) { - printk(KERN_ERR "Cannot setup NMI watchdog on CPU %d\n", - raw_smp_processor_id()); - return -1; - } - - return 0; -} - -void lapic_watchdog_stop(void) -{ - if (wd_ops) - wd_ops->stop(); -} - -unsigned lapic_adjust_nmi_hz(unsigned hz) -{ - struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - if (wd->perfctr_msr == MSR_P6_PERFCTR0 || - wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR1) - hz = adjust_for_32bit_ctr(hz); - return hz; -} - -int __kprobes lapic_wd_event(unsigned nmi_hz) -{ - struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - u64 ctr; - - rdmsrl(wd->perfctr_msr, ctr); - if (ctr & wd_ops->checkbit) /* perfctr still running? */ - return 0; - - wd_ops->rearm(wd, nmi_hz); - return 1; -} diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c index 6e8752c1bd52..8474c998cbd4 100644 --- a/arch/x86/kernel/dumpstack.c +++ b/arch/x86/kernel/dumpstack.c @@ -175,21 +175,21 @@ static const struct stacktrace_ops print_trace_ops = { void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, - unsigned long *stack, unsigned long bp, char *log_lvl) + unsigned long *stack, char *log_lvl) { printk("%sCall Trace:\n", log_lvl); - dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl); + dump_trace(task, regs, stack, &print_trace_ops, log_lvl); } void show_trace(struct task_struct *task, struct pt_regs *regs, - unsigned long *stack, unsigned long bp) + unsigned long *stack) { - show_trace_log_lvl(task, regs, stack, bp, ""); + show_trace_log_lvl(task, regs, stack, ""); } void show_stack(struct task_struct *task, unsigned long *sp) { - show_stack_log_lvl(task, NULL, sp, 0, ""); + show_stack_log_lvl(task, NULL, sp, ""); } /* @@ -210,7 +210,7 @@ void dump_stack(void) init_utsname()->release, (int)strcspn(init_utsname()->version, " "), init_utsname()->version); - show_trace(NULL, NULL, &stack, bp); + show_trace(NULL, NULL, &stack); } EXPORT_SYMBOL(dump_stack); diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c index 1bc7f75a5bda..74cc1eda384b 100644 --- a/arch/x86/kernel/dumpstack_32.c +++ b/arch/x86/kernel/dumpstack_32.c @@ -17,11 +17,12 @@ #include <asm/stacktrace.h> -void dump_trace(struct task_struct *task, struct pt_regs *regs, - unsigned long *stack, unsigned long bp, +void dump_trace(struct task_struct *task, + struct pt_regs *regs, unsigned long *stack, const struct stacktrace_ops *ops, void *data) { int graph = 0; + unsigned long bp; if (!task) task = current; @@ -34,18 +35,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs, stack = (unsigned long *)task->thread.sp; } -#ifdef CONFIG_FRAME_POINTER - if (!bp) { - if (task == current) { - /* Grab bp right from our regs */ - get_bp(bp); - } else { - /* bp is the last reg pushed by switch_to */ - bp = *(unsigned long *) task->thread.sp; - } - } -#endif - + bp = stack_frame(task, regs); for (;;) { struct thread_info *context; @@ -65,7 +55,7 @@ EXPORT_SYMBOL(dump_trace); void show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, - unsigned long *sp, unsigned long bp, char *log_lvl) + unsigned long *sp, char *log_lvl) { unsigned long *stack; int i; @@ -87,7 +77,7 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, touch_nmi_watchdog(); } printk(KERN_CONT "\n"); - show_trace_log_lvl(task, regs, sp, bp, log_lvl); + show_trace_log_lvl(task, regs, sp, log_lvl); } @@ -112,8 +102,7 @@ void show_registers(struct pt_regs *regs) u8 *ip; printk(KERN_EMERG "Stack:\n"); - show_stack_log_lvl(NULL, regs, ®s->sp, - 0, KERN_EMERG); + show_stack_log_lvl(NULL, regs, ®s->sp, KERN_EMERG); printk(KERN_EMERG "Code: "); diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c index 6a340485249a..64101335de19 100644 --- a/arch/x86/kernel/dumpstack_64.c +++ b/arch/x86/kernel/dumpstack_64.c @@ -139,8 +139,8 @@ fixup_bp_irq_link(unsigned long bp, unsigned long *stack, * severe exception (double fault, nmi, stack fault, debug, mce) hardware stack */ -void dump_trace(struct task_struct *task, struct pt_regs *regs, - unsigned long *stack, unsigned long bp, +void dump_trace(struct task_struct *task, + struct pt_regs *regs, unsigned long *stack, const struct stacktrace_ops *ops, void *data) { const unsigned cpu = get_cpu(); @@ -149,6 +149,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs, unsigned used = 0; struct thread_info *tinfo; int graph = 0; + unsigned long bp; if (!task) task = current; @@ -160,18 +161,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs, stack = (unsigned long *)task->thread.sp; } -#ifdef CONFIG_FRAME_POINTER - if (!bp) { - if (task == current) { - /* Grab bp right from our regs */ - get_bp(bp); - } else { - /* bp is the last reg pushed by switch_to */ - bp = *(unsigned long *) task->thread.sp; - } - } -#endif - + bp = stack_frame(task, regs); /* * Print function call entries in all stacks, starting at the * current stack address. If the stacks consist of nested @@ -235,7 +225,7 @@ EXPORT_SYMBOL(dump_trace); void show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, - unsigned long *sp, unsigned long bp, char *log_lvl) + unsigned long *sp, char *log_lvl) { unsigned long *irq_stack_end; unsigned long *irq_stack; @@ -279,7 +269,7 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, preempt_enable(); printk(KERN_CONT "\n"); - show_trace_log_lvl(task, regs, sp, bp, log_lvl); + show_trace_log_lvl(task, regs, sp, log_lvl); } void show_registers(struct pt_regs *regs) @@ -308,7 +298,7 @@ void show_registers(struct pt_regs *regs) printk(KERN_EMERG "Stack:\n"); show_stack_log_lvl(NULL, regs, (unsigned long *)sp, - regs->bp, KERN_EMERG); + KERN_EMERG); printk(KERN_EMERG "Code: "); diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c index 4572f25f9325..cd28a350f7f9 100644 --- a/arch/x86/kernel/early_printk.c +++ b/arch/x86/kernel/early_printk.c @@ -240,7 +240,7 @@ static int __init setup_early_printk(char *buf) if (!strncmp(buf, "xen", 3)) early_console_register(&xenboot_console, keep); #endif -#ifdef CONFIG_X86_MRST_EARLY_PRINTK +#ifdef CONFIG_EARLY_PRINTK_MRST if (!strncmp(buf, "mrst", 4)) { mrst_early_console_init(); early_console_register(&early_mrst_console, keep); @@ -250,7 +250,6 @@ static int __init setup_early_printk(char *buf) hsu_early_console_init(); early_console_register(&early_hsu_console, keep); } - #endif buf++; } diff --git a/arch/x86/kernel/early_printk_mrst.c b/arch/x86/kernel/early_printk_mrst.c deleted file mode 100644 index 65df603622b2..000000000000 --- a/arch/x86/kernel/early_printk_mrst.c +++ /dev/null @@ -1,319 +0,0 @@ -/* - * early_printk_mrst.c - early consoles for Intel MID platforms - * - * Copyright (c) 2008-2010, Intel Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; version 2 - * of the License. - */ - -/* - * This file implements two early consoles named mrst and hsu. - * mrst is based on Maxim3110 spi-uart device, it exists in both - * Moorestown and Medfield platforms, while hsu is based on a High - * Speed UART device which only exists in the Medfield platform - */ - -#include <linux/serial_reg.h> -#include <linux/serial_mfd.h> -#include <linux/kmsg_dump.h> -#include <linux/console.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/io.h> - -#include <asm/fixmap.h> -#include <asm/pgtable.h> -#include <asm/mrst.h> - -#define MRST_SPI_TIMEOUT 0x200000 -#define MRST_REGBASE_SPI0 0xff128000 -#define MRST_REGBASE_SPI1 0xff128400 -#define MRST_CLK_SPI0_REG 0xff11d86c - -/* Bit fields in CTRLR0 */ -#define SPI_DFS_OFFSET 0 - -#define SPI_FRF_OFFSET 4 -#define SPI_FRF_SPI 0x0 -#define SPI_FRF_SSP 0x1 -#define SPI_FRF_MICROWIRE 0x2 -#define SPI_FRF_RESV 0x3 - -#define SPI_MODE_OFFSET 6 -#define SPI_SCPH_OFFSET 6 -#define SPI_SCOL_OFFSET 7 -#define SPI_TMOD_OFFSET 8 -#define SPI_TMOD_TR 0x0 /* xmit & recv */ -#define SPI_TMOD_TO 0x1 /* xmit only */ -#define SPI_TMOD_RO 0x2 /* recv only */ -#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */ - -#define SPI_SLVOE_OFFSET 10 -#define SPI_SRL_OFFSET 11 -#define SPI_CFS_OFFSET 12 - -/* Bit fields in SR, 7 bits */ -#define SR_MASK 0x7f /* cover 7 bits */ -#define SR_BUSY (1 << 0) -#define SR_TF_NOT_FULL (1 << 1) -#define SR_TF_EMPT (1 << 2) -#define SR_RF_NOT_EMPT (1 << 3) -#define SR_RF_FULL (1 << 4) -#define SR_TX_ERR (1 << 5) -#define SR_DCOL (1 << 6) - -struct dw_spi_reg { - u32 ctrl0; - u32 ctrl1; - u32 ssienr; - u32 mwcr; - u32 ser; - u32 baudr; - u32 txfltr; - u32 rxfltr; - u32 txflr; - u32 rxflr; - u32 sr; - u32 imr; - u32 isr; - u32 risr; - u32 txoicr; - u32 rxoicr; - u32 rxuicr; - u32 msticr; - u32 icr; - u32 dmacr; - u32 dmatdlr; - u32 dmardlr; - u32 idr; - u32 version; - - /* Currently operates as 32 bits, though only the low 16 bits matter */ - u32 dr; -} __packed; - -#define dw_readl(dw, name) __raw_readl(&(dw)->name) -#define dw_writel(dw, name, val) __raw_writel((val), &(dw)->name) - -/* Default use SPI0 register for mrst, we will detect Penwell and use SPI1 */ -static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0; - -static u32 *pclk_spi0; -/* Always contains an accessable address, start with 0 */ -static struct dw_spi_reg *pspi; - -static struct kmsg_dumper dw_dumper; -static int dumper_registered; - -static void dw_kmsg_dump(struct kmsg_dumper *dumper, - enum kmsg_dump_reason reason, - const char *s1, unsigned long l1, - const char *s2, unsigned long l2) -{ - int i; - - /* When run to this, we'd better re-init the HW */ - mrst_early_console_init(); - - for (i = 0; i < l1; i++) - early_mrst_console.write(&early_mrst_console, s1 + i, 1); - for (i = 0; i < l2; i++) - early_mrst_console.write(&early_mrst_console, s2 + i, 1); -} - -/* Set the ratio rate to 115200, 8n1, IRQ disabled */ -static void max3110_write_config(void) -{ - u16 config; - - config = 0xc001; - dw_writel(pspi, dr, config); -} - -/* Translate char to a eligible word and send to max3110 */ -static void max3110_write_data(char c) -{ - u16 data; - - data = 0x8000 | c; - dw_writel(pspi, dr, data); -} - -void mrst_early_console_init(void) -{ - u32 ctrlr0 = 0; - u32 spi0_cdiv; - u32 freq; /* Freqency info only need be searched once */ - - /* Base clk is 100 MHz, the actual clk = 100M / (clk_divider + 1) */ - pclk_spi0 = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, - MRST_CLK_SPI0_REG); - spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9; - freq = 100000000 / (spi0_cdiv + 1); - - if (mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL) - mrst_spi_paddr = MRST_REGBASE_SPI1; - - pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, - mrst_spi_paddr); - - /* Disable SPI controller */ - dw_writel(pspi, ssienr, 0); - - /* Set control param, 8 bits, transmit only mode */ - ctrlr0 = dw_readl(pspi, ctrl0); - - ctrlr0 &= 0xfcc0; - ctrlr0 |= 0xf | (SPI_FRF_SPI << SPI_FRF_OFFSET) - | (SPI_TMOD_TO << SPI_TMOD_OFFSET); - dw_writel(pspi, ctrl0, ctrlr0); - - /* - * Change the spi0 clk to comply with 115200 bps, use 100000 to - * calculate the clk dividor to make the clock a little slower - * than real baud rate. - */ - dw_writel(pspi, baudr, freq/100000); - - /* Disable all INT for early phase */ - dw_writel(pspi, imr, 0x0); - - /* Set the cs to spi-uart */ - dw_writel(pspi, ser, 0x2); - - /* Enable the HW, the last step for HW init */ - dw_writel(pspi, ssienr, 0x1); - - /* Set the default configuration */ - max3110_write_config(); - - /* Register the kmsg dumper */ - if (!dumper_registered) { - dw_dumper.dump = dw_kmsg_dump; - kmsg_dump_register(&dw_dumper); - dumper_registered = 1; - } -} - -/* Slave select should be called in the read/write function */ -static void early_mrst_spi_putc(char c) -{ - unsigned int timeout; - u32 sr; - - timeout = MRST_SPI_TIMEOUT; - /* Early putc needs to make sure the TX FIFO is not full */ - while (--timeout) { - sr = dw_readl(pspi, sr); - if (!(sr & SR_TF_NOT_FULL)) - cpu_relax(); - else - break; - } - - if (!timeout) - pr_warning("MRST earlycon: timed out\n"); - else - max3110_write_data(c); -} - -/* Early SPI only uses polling mode */ -static void early_mrst_spi_write(struct console *con, const char *str, unsigned n) -{ - int i; - - for (i = 0; i < n && *str; i++) { - if (*str == '\n') - early_mrst_spi_putc('\r'); - early_mrst_spi_putc(*str); - str++; - } -} - -struct console early_mrst_console = { - .name = "earlymrst", - .write = early_mrst_spi_write, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -/* - * Following is the early console based on Medfield HSU (High - * Speed UART) device. - */ -#define HSU_PORT2_PADDR 0xffa28180 - -static void __iomem *phsu; - -void hsu_early_console_init(void) -{ - u8 lcr; - - phsu = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, - HSU_PORT2_PADDR); - - /* Disable FIFO */ - writeb(0x0, phsu + UART_FCR); - - /* Set to default 115200 bps, 8n1 */ - lcr = readb(phsu + UART_LCR); - writeb((0x80 | lcr), phsu + UART_LCR); - writeb(0x18, phsu + UART_DLL); - writeb(lcr, phsu + UART_LCR); - writel(0x3600, phsu + UART_MUL*4); - - writeb(0x8, phsu + UART_MCR); - writeb(0x7, phsu + UART_FCR); - writeb(0x3, phsu + UART_LCR); - - /* Clear IRQ status */ - readb(phsu + UART_LSR); - readb(phsu + UART_RX); - readb(phsu + UART_IIR); - readb(phsu + UART_MSR); - - /* Enable FIFO */ - writeb(0x7, phsu + UART_FCR); -} - -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -static void early_hsu_putc(char ch) -{ - unsigned int timeout = 10000; /* 10ms */ - u8 status; - - while (--timeout) { - status = readb(phsu + UART_LSR); - if (status & BOTH_EMPTY) - break; - udelay(1); - } - - /* Only write the char when there was no timeout */ - if (timeout) - writeb(ch, phsu + UART_TX); -} - -static void early_hsu_write(struct console *con, const char *str, unsigned n) -{ - int i; - - for (i = 0; i < n && *str; i++) { - if (*str == '\n') - early_hsu_putc('\r'); - early_hsu_putc(*str); - str++; - } -} - -struct console early_hsu_console = { - .name = "earlyhsu", - .write = early_hsu_write, - .flags = CON_PRINTBUFFER, - .index = -1, -}; diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 59e175e89599..591e60104278 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -395,7 +395,7 @@ sysenter_past_esp: * A tiny bit of offset fixup is necessary - 4*4 means the 4 words * pushed above; +8 corresponds to copy_thread's esp0 setting. */ - pushl_cfi (TI_sysenter_return-THREAD_SIZE_asm+8+4*4)(%esp) + pushl_cfi ((TI_sysenter_return)-THREAD_SIZE_asm+8+4*4)(%esp) CFI_REL_OFFSET eip, 0 pushl_cfi %eax diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index fe2690d71c0c..e3ba417e8697 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -295,6 +295,7 @@ ENDPROC(native_usergs_sysret64) .endm /* save partial stack frame */ + .pushsection .kprobes.text, "ax" ENTRY(save_args) XCPT_FRAME cld @@ -334,6 +335,7 @@ ENTRY(save_args) ret CFI_ENDPROC END(save_args) + .popsection ENTRY(save_rest) PARTIAL_FRAME 1 REST_SKIP+8 diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 3afb33f14d2d..298448656b60 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -19,6 +19,7 @@ #include <linux/sched.h> #include <linux/init.h> #include <linux/list.h> +#include <linux/module.h> #include <trace/syscall.h> @@ -49,6 +50,7 @@ static DEFINE_PER_CPU(int, save_modifying_code); int ftrace_arch_code_modify_prepare(void) { set_kernel_text_rw(); + set_all_modules_text_rw(); modifying_code = 1; return 0; } @@ -56,6 +58,7 @@ int ftrace_arch_code_modify_prepare(void) int ftrace_arch_code_modify_post_process(void) { modifying_code = 0; + set_all_modules_text_ro(); set_kernel_text_ro(); return 0; } diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index 763310165fa0..7f138b3c3c52 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -61,6 +61,9 @@ void __init i386_start_kernel(void) case X86_SUBARCH_MRST: x86_mrst_early_setup(); break; + case X86_SUBARCH_CE4100: + x86_ce4100_early_setup(); + break; default: i386_default_early_setup(); break; diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index bcece91dd311..9f54b209c378 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -60,16 +60,18 @@ #define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD) #endif +/* Number of possible pages in the lowmem region */ +LOWMEM_PAGES = (((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) + /* Enough space to fit pagetables for the low memory linear map */ -MAPPING_BEYOND_END = \ - PAGE_TABLE_SIZE(((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) << PAGE_SHIFT +MAPPING_BEYOND_END = PAGE_TABLE_SIZE(LOWMEM_PAGES) << PAGE_SHIFT /* * Worst-case size of the kernel mapping we need to make: - * the worst-case size of the kernel itself, plus the extra we need - * to map for the linear map. + * a relocatable kernel can live anywhere in lowmem, so we need to be able + * to map all of lowmem. */ -KERNEL_PAGES = (KERNEL_IMAGE_SIZE + MAPPING_BEYOND_END)>>PAGE_SHIFT +KERNEL_PAGES = LOWMEM_PAGES INIT_MAP_SIZE = PAGE_TABLE_SIZE(KERNEL_PAGES) * PAGE_SIZE_asm RESERVE_BRK(pagetables, INIT_MAP_SIZE) @@ -137,39 +139,6 @@ ENTRY(startup_32) movl %eax, pa(olpc_ofw_pgd) #endif -#ifdef CONFIG_PARAVIRT - /* This is can only trip for a broken bootloader... */ - cmpw $0x207, pa(boot_params + BP_version) - jb default_entry - - /* Paravirt-compatible boot parameters. Look to see what architecture - we're booting under. */ - movl pa(boot_params + BP_hardware_subarch), %eax - cmpl $num_subarch_entries, %eax - jae bad_subarch - - movl pa(subarch_entries)(,%eax,4), %eax - subl $__PAGE_OFFSET, %eax - jmp *%eax - -bad_subarch: -WEAK(lguest_entry) -WEAK(xen_entry) - /* Unknown implementation; there's really - nothing we can do at this point. */ - ud2a - - __INITDATA - -subarch_entries: - .long default_entry /* normal x86/PC */ - .long lguest_entry /* lguest hypervisor */ - .long xen_entry /* Xen hypervisor */ - .long default_entry /* Moorestown MID */ -num_subarch_entries = (. - subarch_entries) / 4 -.previous -#endif /* CONFIG_PARAVIRT */ - /* * Initialize page tables. This creates a PDE and a set of page * tables, which are located immediately beyond __brk_base. The variable @@ -179,7 +148,6 @@ num_subarch_entries = (. - subarch_entries) / 4 * * Note that the stack is not yet set up! */ -default_entry: #ifdef CONFIG_X86_PAE /* @@ -259,7 +227,42 @@ page_pde_offset = (__PAGE_OFFSET >> 20); movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax movl %eax,pa(initial_page_table+0xffc) #endif - jmp 3f + +#ifdef CONFIG_PARAVIRT + /* This is can only trip for a broken bootloader... */ + cmpw $0x207, pa(boot_params + BP_version) + jb default_entry + + /* Paravirt-compatible boot parameters. Look to see what architecture + we're booting under. */ + movl pa(boot_params + BP_hardware_subarch), %eax + cmpl $num_subarch_entries, %eax + jae bad_subarch + + movl pa(subarch_entries)(,%eax,4), %eax + subl $__PAGE_OFFSET, %eax + jmp *%eax + +bad_subarch: +WEAK(lguest_entry) +WEAK(xen_entry) + /* Unknown implementation; there's really + nothing we can do at this point. */ + ud2a + + __INITDATA + +subarch_entries: + .long default_entry /* normal x86/PC */ + .long lguest_entry /* lguest hypervisor */ + .long xen_entry /* Xen hypervisor */ + .long default_entry /* Moorestown MID */ +num_subarch_entries = (. - subarch_entries) / 4 +.previous +#else + jmp default_entry +#endif /* CONFIG_PARAVIRT */ + /* * Non-boot CPU entry point; entered from trampoline.S * We can't lgdt here, because lgdt itself uses a data segment, but @@ -280,7 +283,7 @@ ENTRY(startup_32_smp) movl %eax,%fs movl %eax,%gs #endif /* CONFIG_SMP */ -3: +default_entry: /* * New page tables may be in 4Mbyte page mode and may @@ -314,6 +317,10 @@ ENTRY(startup_32_smp) subl $0x80000001, %eax cmpl $(0x8000ffff-0x80000001), %eax ja 6f + + /* Clear bogus XD_DISABLE bits */ + call verify_cpu + mov $0x80000001, %eax cpuid /* Execute Disable bit supported? */ @@ -609,6 +616,8 @@ ignore_int: #endif iret +#include "verify_cpu.S" + __REFDATA .align 4 ENTRY(initial_code) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index ae03cab4352e..4ff5968f12d2 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -27,6 +27,9 @@ #define HPET_DEV_FSB_CAP 0x1000 #define HPET_DEV_PERI_CAP 0x2000 +#define HPET_MIN_CYCLES 128 +#define HPET_MIN_PROG_DELTA (HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1)) + #define EVT_TO_HPET_DEV(evt) container_of(evt, struct hpet_dev, evt) /* @@ -299,8 +302,9 @@ static void hpet_legacy_clockevent_register(void) /* Calculate the min / max delta */ hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, &hpet_clockevent); - /* 5 usec minimum reprogramming delta. */ - hpet_clockevent.min_delta_ns = 5000; + /* Setup minimum reprogramming delta. */ + hpet_clockevent.min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA, + &hpet_clockevent); /* * Start hpet with the boot cpu mask and make it @@ -393,22 +397,24 @@ static int hpet_next_event(unsigned long delta, * the wraparound into account) nor a simple count down event * mode. Further the write to the comparator register is * delayed internally up to two HPET clock cycles in certain - * chipsets (ATI, ICH9,10). We worked around that by reading - * back the compare register, but that required another - * workaround for ICH9,10 chips where the first readout after - * write can return the old stale value. We already have a - * minimum delta of 5us enforced, but a NMI or SMI hitting + * chipsets (ATI, ICH9,10). Some newer AMD chipsets have even + * longer delays. We worked around that by reading back the + * compare register, but that required another workaround for + * ICH9,10 chips where the first readout after write can + * return the old stale value. We already had a minimum + * programming delta of 5us enforced, but a NMI or SMI hitting * between the counter readout and the comparator write can * move us behind that point easily. Now instead of reading * the compare register back several times, we make the ETIME * decision based on the following: Return ETIME if the - * counter value after the write is less than 8 HPET cycles + * counter value after the write is less than HPET_MIN_CYCLES * away from the event or if the counter is already ahead of - * the event. + * the event. The minimum programming delta for the generic + * clockevents code is set to 1.5 * HPET_MIN_CYCLES. */ res = (s32)(cnt - hpet_readl(HPET_COUNTER)); - return res < 8 ? -ETIME : 0; + return res < HPET_MIN_CYCLES ? -ETIME : 0; } static void hpet_legacy_set_mode(enum clock_event_mode mode, diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c index ff15c9dcc25d..42c594254507 100644 --- a/arch/x86/kernel/hw_breakpoint.c +++ b/arch/x86/kernel/hw_breakpoint.c @@ -433,6 +433,10 @@ static int __kprobes hw_breakpoint_handler(struct die_args *args) dr6_p = (unsigned long *)ERR_PTR(args->err); dr6 = *dr6_p; + /* If it's a single step, TRAP bits are random */ + if (dr6 & DR_STEP) + return NOTIFY_DONE; + /* Do an early return if no trap bits are set in DR6 */ if ((dr6 & DR_TRAP_BITS) == 0) return NOTIFY_DONE; diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c index 1cbd54c0df99..5940282bd2f9 100644 --- a/arch/x86/kernel/kprobes.c +++ b/arch/x86/kernel/kprobes.c @@ -1184,6 +1184,10 @@ static void __kprobes optimized_callback(struct optimized_kprobe *op, { struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + /* This is possible if op is under delayed unoptimizing */ + if (kprobe_disabled(&op->kp)) + return; + preempt_disable(); if (kprobe_running()) { kprobes_inc_nmissed_count(&op->kp); @@ -1401,10 +1405,16 @@ int __kprobes arch_prepare_optimized_kprobe(struct optimized_kprobe *op) return 0; } -/* Replace a breakpoint (int3) with a relative jump. */ -int __kprobes arch_optimize_kprobe(struct optimized_kprobe *op) +#define MAX_OPTIMIZE_PROBES 256 +static struct text_poke_param *jump_poke_params; +static struct jump_poke_buffer { + u8 buf[RELATIVEJUMP_SIZE]; +} *jump_poke_bufs; + +static void __kprobes setup_optimize_kprobe(struct text_poke_param *tprm, + u8 *insn_buf, + struct optimized_kprobe *op) { - unsigned char jmp_code[RELATIVEJUMP_SIZE]; s32 rel = (s32)((long)op->optinsn.insn - ((long)op->kp.addr + RELATIVEJUMP_SIZE)); @@ -1412,16 +1422,79 @@ int __kprobes arch_optimize_kprobe(struct optimized_kprobe *op) memcpy(op->optinsn.copied_insn, op->kp.addr + INT3_SIZE, RELATIVE_ADDR_SIZE); - jmp_code[0] = RELATIVEJUMP_OPCODE; - *(s32 *)(&jmp_code[1]) = rel; + insn_buf[0] = RELATIVEJUMP_OPCODE; + *(s32 *)(&insn_buf[1]) = rel; + + tprm->addr = op->kp.addr; + tprm->opcode = insn_buf; + tprm->len = RELATIVEJUMP_SIZE; +} + +/* + * Replace breakpoints (int3) with relative jumps. + * Caller must call with locking kprobe_mutex and text_mutex. + */ +void __kprobes arch_optimize_kprobes(struct list_head *oplist) +{ + struct optimized_kprobe *op, *tmp; + int c = 0; + + list_for_each_entry_safe(op, tmp, oplist, list) { + WARN_ON(kprobe_disabled(&op->kp)); + /* Setup param */ + setup_optimize_kprobe(&jump_poke_params[c], + jump_poke_bufs[c].buf, op); + list_del_init(&op->list); + if (++c >= MAX_OPTIMIZE_PROBES) + break; + } /* * text_poke_smp doesn't support NMI/MCE code modifying. * However, since kprobes itself also doesn't support NMI/MCE * code probing, it's not a problem. */ - text_poke_smp(op->kp.addr, jmp_code, RELATIVEJUMP_SIZE); - return 0; + text_poke_smp_batch(jump_poke_params, c); +} + +static void __kprobes setup_unoptimize_kprobe(struct text_poke_param *tprm, + u8 *insn_buf, + struct optimized_kprobe *op) +{ + /* Set int3 to first byte for kprobes */ + insn_buf[0] = BREAKPOINT_INSTRUCTION; + memcpy(insn_buf + 1, op->optinsn.copied_insn, RELATIVE_ADDR_SIZE); + + tprm->addr = op->kp.addr; + tprm->opcode = insn_buf; + tprm->len = RELATIVEJUMP_SIZE; +} + +/* + * Recover original instructions and breakpoints from relative jumps. + * Caller must call with locking kprobe_mutex. + */ +extern void arch_unoptimize_kprobes(struct list_head *oplist, + struct list_head *done_list) +{ + struct optimized_kprobe *op, *tmp; + int c = 0; + + list_for_each_entry_safe(op, tmp, oplist, list) { + /* Setup param */ + setup_unoptimize_kprobe(&jump_poke_params[c], + jump_poke_bufs[c].buf, op); + list_move(&op->list, done_list); + if (++c >= MAX_OPTIMIZE_PROBES) + break; + } + + /* + * text_poke_smp doesn't support NMI/MCE code modifying. + * However, since kprobes itself also doesn't support NMI/MCE + * code probing, it's not a problem. + */ + text_poke_smp_batch(jump_poke_params, c); } /* Replace a relative jump with a breakpoint (int3). */ @@ -1453,11 +1526,35 @@ static int __kprobes setup_detour_execution(struct kprobe *p, } return 0; } + +static int __kprobes init_poke_params(void) +{ + /* Allocate code buffer and parameter array */ + jump_poke_bufs = kmalloc(sizeof(struct jump_poke_buffer) * + MAX_OPTIMIZE_PROBES, GFP_KERNEL); + if (!jump_poke_bufs) + return -ENOMEM; + + jump_poke_params = kmalloc(sizeof(struct text_poke_param) * + MAX_OPTIMIZE_PROBES, GFP_KERNEL); + if (!jump_poke_params) { + kfree(jump_poke_bufs); + jump_poke_bufs = NULL; + return -ENOMEM; + } + + return 0; +} +#else /* !CONFIG_OPTPROBES */ +static int __kprobes init_poke_params(void) +{ + return 0; +} #endif int __init arch_init_kprobes(void) { - return 0; + return init_poke_params(); } int __kprobes arch_trampoline_kprobe(struct kprobe *p) diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index ce0cb4721c9a..0fe6d1a66c38 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -155,12 +155,6 @@ static int apply_microcode_amd(int cpu) return 0; } -static int get_ucode_data(void *to, const u8 *from, size_t n) -{ - memcpy(to, from, n); - return 0; -} - static void * get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size) { @@ -168,8 +162,7 @@ get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size) u8 section_hdr[UCODE_CONTAINER_SECTION_HDR]; void *mc; - if (get_ucode_data(section_hdr, buf, UCODE_CONTAINER_SECTION_HDR)) - return NULL; + get_ucode_data(section_hdr, buf, UCODE_CONTAINER_SECTION_HDR); if (section_hdr[0] != UCODE_UCODE_TYPE) { pr_err("error: invalid type field in container file section header\n"); @@ -183,16 +176,13 @@ get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size) return NULL; } - mc = vmalloc(UCODE_MAX_SIZE); - if (mc) { - memset(mc, 0, UCODE_MAX_SIZE); - if (get_ucode_data(mc, buf + UCODE_CONTAINER_SECTION_HDR, - total_size)) { - vfree(mc); - mc = NULL; - } else - *mc_size = total_size + UCODE_CONTAINER_SECTION_HDR; - } + mc = vzalloc(UCODE_MAX_SIZE); + if (!mc) + return NULL; + + get_ucode_data(mc, buf + UCODE_CONTAINER_SECTION_HDR, total_size); + *mc_size = total_size + UCODE_CONTAINER_SECTION_HDR; + return mc; } @@ -202,8 +192,7 @@ static int install_equiv_cpu_table(const u8 *buf) unsigned int *buf_pos = (unsigned int *)container_hdr; unsigned long size; - if (get_ucode_data(&container_hdr, buf, UCODE_CONTAINER_HEADER_SIZE)) - return 0; + get_ucode_data(&container_hdr, buf, UCODE_CONTAINER_HEADER_SIZE); size = buf_pos[2]; @@ -219,10 +208,7 @@ static int install_equiv_cpu_table(const u8 *buf) } buf += UCODE_CONTAINER_HEADER_SIZE; - if (get_ucode_data(equiv_cpu_table, buf, size)) { - vfree(equiv_cpu_table); - return 0; - } + get_ucode_data(equiv_cpu_table, buf, size); return size + UCODE_CONTAINER_HEADER_SIZE; /* add header length */ } diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c index dcb65cc0a053..1a1b606d3e92 100644 --- a/arch/x86/kernel/microcode_intel.c +++ b/arch/x86/kernel/microcode_intel.c @@ -364,8 +364,7 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size, /* For performance reasons, reuse mc area when possible */ if (!mc || mc_size > curr_mc_size) { - if (mc) - vfree(mc); + vfree(mc); mc = vmalloc(mc_size); if (!mc) break; @@ -374,13 +373,11 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size, if (get_ucode_data(mc, ucode_ptr, mc_size) || microcode_sanity_check(mc) < 0) { - vfree(mc); break; } if (get_matching_microcode(&uci->cpu_sig, mc, new_rev)) { - if (new_mc) - vfree(new_mc); + vfree(new_mc); new_rev = mc_header.rev; new_mc = mc; mc = NULL; /* trigger new vmalloc */ @@ -390,12 +387,10 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size, leftover -= mc_size; } - if (mc) - vfree(mc); + vfree(mc); if (leftover) { - if (new_mc) - vfree(new_mc); + vfree(new_mc); state = UCODE_ERROR; goto out; } @@ -405,8 +400,7 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size, goto out; } - if (uci->mc) - vfree(uci->mc); + vfree(uci->mc); uci->mc = (struct microcode_intel *)new_mc; pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n", diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c index 6da143c2a6b8..ac861b8348e2 100644 --- a/arch/x86/kernel/mmconf-fam10h_64.c +++ b/arch/x86/kernel/mmconf-fam10h_64.c @@ -25,7 +25,6 @@ struct pci_hostbridge_probe { }; static u64 __cpuinitdata fam10h_pci_mmconf_base; -static int __cpuinitdata fam10h_pci_mmconf_base_status; static struct pci_hostbridge_probe pci_probes[] __cpuinitdata = { { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 }, @@ -44,10 +43,12 @@ static int __cpuinit cmp_range(const void *x1, const void *x2) return start1 - start2; } -/*[47:0] */ -/* need to avoid (0xfd<<32) and (0xfe<<32), ht used space */ +#define MMCONF_UNIT (1ULL << FAM10H_MMIO_CONF_BASE_SHIFT) +#define MMCONF_MASK (~(MMCONF_UNIT - 1)) +#define MMCONF_SIZE (MMCONF_UNIT << 8) +/* need to avoid (0xfd<<32), (0xfe<<32), and (0xff<<32), ht used space */ #define FAM10H_PCI_MMCONF_BASE (0xfcULL<<32) -#define BASE_VALID(b) ((b != (0xfdULL << 32)) && (b != (0xfeULL << 32))) +#define BASE_VALID(b) ((b) + MMCONF_SIZE <= (0xfdULL<<32) || (b) >= (1ULL<<40)) static void __cpuinit get_fam10h_pci_mmconf_base(void) { int i; @@ -64,12 +65,11 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void) struct range range[8]; /* only try to get setting from BSP */ - /* -1 or 1 */ - if (fam10h_pci_mmconf_base_status) + if (fam10h_pci_mmconf_base) return; if (!early_pci_allowed()) - goto fail; + return; found = 0; for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { @@ -91,7 +91,7 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void) } if (!found) - goto fail; + return; /* SYS_CFG */ address = MSR_K8_SYSCFG; @@ -99,16 +99,16 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void) /* TOP_MEM2 is not enabled? */ if (!(val & (1<<21))) { - tom2 = 0; + tom2 = 1ULL << 32; } else { /* TOP_MEM2 */ address = MSR_K8_TOP_MEM2; rdmsrl(address, val); - tom2 = val & (0xffffULL<<32); + tom2 = max(val & 0xffffff800000ULL, 1ULL << 32); } if (base <= tom2) - base = tom2 + (1ULL<<32); + base = (tom2 + 2 * MMCONF_UNIT - 1) & MMCONF_MASK; /* * need to check if the range is in the high mmio range that is @@ -123,11 +123,11 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void) if (!(reg & 3)) continue; - start = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/ + start = (u64)(reg & 0xffffff00) << 8; /* 39:16 on 31:8*/ reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3)); - end = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/ + end = ((u64)(reg & 0xffffff00) << 8) | 0xffff; /* 39:16 on 31:8*/ - if (!end) + if (end < tom2) continue; range[hi_mmio_num].start = start; @@ -143,32 +143,27 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void) if (range[hi_mmio_num - 1].end < base) goto out; - if (range[0].start > base) + if (range[0].start > base + MMCONF_SIZE) goto out; /* need to find one window */ - base = range[0].start - (1ULL << 32); + base = (range[0].start & MMCONF_MASK) - MMCONF_UNIT; if ((base > tom2) && BASE_VALID(base)) goto out; - base = range[hi_mmio_num - 1].end + (1ULL << 32); - if ((base > tom2) && BASE_VALID(base)) + base = (range[hi_mmio_num - 1].end + MMCONF_UNIT) & MMCONF_MASK; + if (BASE_VALID(base)) goto out; /* need to find window between ranges */ - if (hi_mmio_num > 1) - for (i = 0; i < hi_mmio_num - 1; i++) { - if (range[i + 1].start > (range[i].end + (1ULL << 32))) { - base = range[i].end + (1ULL << 32); - if ((base > tom2) && BASE_VALID(base)) - goto out; - } + for (i = 1; i < hi_mmio_num; i++) { + base = (range[i - 1].end + MMCONF_UNIT) & MMCONF_MASK; + val = range[i].start & MMCONF_MASK; + if (val >= base + MMCONF_SIZE && BASE_VALID(base)) + goto out; } - -fail: - fam10h_pci_mmconf_base_status = -1; return; + out: fam10h_pci_mmconf_base = base; - fam10h_pci_mmconf_base_status = 1; } void __cpuinit fam10h_check_enable_mmcfg(void) @@ -190,11 +185,10 @@ void __cpuinit fam10h_check_enable_mmcfg(void) /* only trust the one handle 256 buses, if acpi=off */ if (!acpi_pci_disabled || busnbits >= 8) { - u64 base; - base = val & (0xffffULL << 32); - if (fam10h_pci_mmconf_base_status <= 0) { + u64 base = val & MMCONF_MASK; + + if (!fam10h_pci_mmconf_base) { fam10h_pci_mmconf_base = base; - fam10h_pci_mmconf_base_status = 1; return; } else if (fam10h_pci_mmconf_base == base) return; @@ -206,8 +200,10 @@ void __cpuinit fam10h_check_enable_mmcfg(void) * with 256 buses */ get_fam10h_pci_mmconf_base(); - if (fam10h_pci_mmconf_base_status <= 0) + if (!fam10h_pci_mmconf_base) { + pci_probe &= ~PCI_CHECK_ENABLE_AMD_MMCONF; return; + } printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n"); val &= ~((FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT) | diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 9af64d9c4b67..01b0f6d06451 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -118,21 +118,8 @@ static void __init MP_bus_info(struct mpc_bus *m) static void __init MP_ioapic_info(struct mpc_ioapic *m) { - if (!(m->flags & MPC_APIC_USABLE)) - return; - - printk(KERN_INFO "I/O APIC #%d Version %d at 0x%X.\n", - m->apicid, m->apicver, m->apicaddr); - - mp_register_ioapic(m->apicid, m->apicaddr, gsi_top); -} - -static void print_MP_intsrc_info(struct mpc_intsrc *m) -{ - apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x," - " IRQ %02x, APIC ID %x, APIC INT %02x\n", - m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbus, - m->srcbusirq, m->dstapic, m->dstirq); + if (m->flags & MPC_APIC_USABLE) + mp_register_ioapic(m->apicid, m->apicaddr, gsi_top); } static void __init print_mp_irq_info(struct mpc_intsrc *mp_irq) @@ -144,73 +131,11 @@ static void __init print_mp_irq_info(struct mpc_intsrc *mp_irq) mp_irq->srcbusirq, mp_irq->dstapic, mp_irq->dstirq); } -static void __init assign_to_mp_irq(struct mpc_intsrc *m, - struct mpc_intsrc *mp_irq) -{ - mp_irq->dstapic = m->dstapic; - mp_irq->type = m->type; - mp_irq->irqtype = m->irqtype; - mp_irq->irqflag = m->irqflag; - mp_irq->srcbus = m->srcbus; - mp_irq->srcbusirq = m->srcbusirq; - mp_irq->dstirq = m->dstirq; -} - -static void __init assign_to_mpc_intsrc(struct mpc_intsrc *mp_irq, - struct mpc_intsrc *m) -{ - m->dstapic = mp_irq->dstapic; - m->type = mp_irq->type; - m->irqtype = mp_irq->irqtype; - m->irqflag = mp_irq->irqflag; - m->srcbus = mp_irq->srcbus; - m->srcbusirq = mp_irq->srcbusirq; - m->dstirq = mp_irq->dstirq; -} - -static int __init mp_irq_mpc_intsrc_cmp(struct mpc_intsrc *mp_irq, - struct mpc_intsrc *m) -{ - if (mp_irq->dstapic != m->dstapic) - return 1; - if (mp_irq->type != m->type) - return 2; - if (mp_irq->irqtype != m->irqtype) - return 3; - if (mp_irq->irqflag != m->irqflag) - return 4; - if (mp_irq->srcbus != m->srcbus) - return 5; - if (mp_irq->srcbusirq != m->srcbusirq) - return 6; - if (mp_irq->dstirq != m->dstirq) - return 7; - - return 0; -} - -static void __init MP_intsrc_info(struct mpc_intsrc *m) -{ - int i; - - print_MP_intsrc_info(m); - - for (i = 0; i < mp_irq_entries; i++) { - if (!mp_irq_mpc_intsrc_cmp(&mp_irqs[i], m)) - return; - } - - assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]); - if (++mp_irq_entries == MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!!\n"); -} #else /* CONFIG_X86_IO_APIC */ static inline void __init MP_bus_info(struct mpc_bus *m) {} static inline void __init MP_ioapic_info(struct mpc_ioapic *m) {} -static inline void __init MP_intsrc_info(struct mpc_intsrc *m) {} #endif /* CONFIG_X86_IO_APIC */ - static void __init MP_lintsrc_info(struct mpc_lintsrc *m) { apic_printk(APIC_VERBOSE, "Lint: type %d, pol %d, trig %d, bus %02x," @@ -222,7 +147,6 @@ static void __init MP_lintsrc_info(struct mpc_lintsrc *m) /* * Read/parse the MPC */ - static int __init smp_check_mpc(struct mpc_table *mpc, char *oem, char *str) { @@ -275,18 +199,6 @@ static void __init smp_dump_mptable(struct mpc_table *mpc, unsigned char *mpt) void __init default_smp_read_mpc_oem(struct mpc_table *mpc) { } -static void __init smp_register_lapic_address(unsigned long address) -{ - mp_lapic_addr = address; - - set_fixmap_nocache(FIX_APIC_BASE, address); - if (boot_cpu_physical_apicid == -1U) { - boot_cpu_physical_apicid = read_apic_id(); - apic_version[boot_cpu_physical_apicid] = - GET_APIC_VERSION(apic_read(APIC_LVR)); - } -} - static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early) { char str[16]; @@ -301,17 +213,13 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early) #ifdef CONFIG_X86_32 generic_mps_oem_check(mpc, oem, str); #endif - /* save the local APIC address, it might be non-default */ + /* Initialize the lapic mapping */ if (!acpi_lapic) - mp_lapic_addr = mpc->lapic; + register_lapic_address(mpc->lapic); if (early) return 1; - /* Initialize the lapic mapping */ - if (!acpi_lapic) - smp_register_lapic_address(mpc->lapic); - if (mpc->oemptr) x86_init.mpparse.smp_read_mpc_oem(mpc); @@ -337,7 +245,7 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early) skip_entry(&mpt, &count, sizeof(struct mpc_ioapic)); break; case MP_INTSRC: - MP_intsrc_info((struct mpc_intsrc *)mpt); + mp_save_irq((struct mpc_intsrc *)mpt); skip_entry(&mpt, &count, sizeof(struct mpc_intsrc)); break; case MP_LINTSRC: @@ -429,13 +337,13 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type) intsrc.srcbusirq = i; intsrc.dstirq = i ? i : 2; /* IRQ0 to INTIN2 */ - MP_intsrc_info(&intsrc); + mp_save_irq(&intsrc); } intsrc.irqtype = mp_ExtINT; intsrc.srcbusirq = 0; intsrc.dstirq = 0; /* 8259A to INTIN0 */ - MP_intsrc_info(&intsrc); + mp_save_irq(&intsrc); } @@ -784,11 +692,11 @@ static void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) int i; apic_printk(APIC_VERBOSE, "OLD "); - print_MP_intsrc_info(m); + print_mp_irq_info(m); i = get_MP_intsrc_index(m); if (i > 0) { - assign_to_mpc_intsrc(&mp_irqs[i], m); + memcpy(m, &mp_irqs[i], sizeof(*m)); apic_printk(APIC_VERBOSE, "NEW "); print_mp_irq_info(&mp_irqs[i]); return; @@ -875,14 +783,14 @@ static int __init replace_intsrc_all(struct mpc_table *mpc, if (nr_m_spare > 0) { apic_printk(APIC_VERBOSE, "*NEW* found\n"); nr_m_spare--; - assign_to_mpc_intsrc(&mp_irqs[i], m_spare[nr_m_spare]); + memcpy(m_spare[nr_m_spare], &mp_irqs[i], sizeof(mp_irqs[i])); m_spare[nr_m_spare] = NULL; } else { struct mpc_intsrc *m = (struct mpc_intsrc *)mpt; count += sizeof(struct mpc_intsrc); if (check_slot(mpc_new_phys, mpc_new_length, count) < 0) goto out; - assign_to_mpc_intsrc(&mp_irqs[i], m); + memcpy(m, &mp_irqs[i], sizeof(*m)); mpc->length = count; mpt += sizeof(struct mpc_intsrc); } diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index ba0f0ca9f280..c01ffa5b9b87 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -143,7 +143,7 @@ static void flush_gart(void) spin_lock_irqsave(&iommu_bitmap_lock, flags); if (need_flush) { - k8_flush_garts(); + amd_flush_garts(); need_flush = false; } spin_unlock_irqrestore(&iommu_bitmap_lock, flags); @@ -561,17 +561,17 @@ static void enable_gart_translations(void) { int i; - if (!k8_northbridges.gart_supported) + if (!amd_nb_has_feature(AMD_NB_GART)) return; - for (i = 0; i < k8_northbridges.num; i++) { - struct pci_dev *dev = k8_northbridges.nb_misc[i]; + for (i = 0; i < amd_nb_num(); i++) { + struct pci_dev *dev = node_to_amd_nb(i)->misc; enable_gart_translation(dev, __pa(agp_gatt_table)); } /* Flush the GART-TLB to remove stale entries */ - k8_flush_garts(); + amd_flush_garts(); } /* @@ -596,13 +596,13 @@ static void gart_fixup_northbridges(struct sys_device *dev) if (!fix_up_north_bridges) return; - if (!k8_northbridges.gart_supported) + if (!amd_nb_has_feature(AMD_NB_GART)) return; pr_info("PCI-DMA: Restoring GART aperture settings\n"); - for (i = 0; i < k8_northbridges.num; i++) { - struct pci_dev *dev = k8_northbridges.nb_misc[i]; + for (i = 0; i < amd_nb_num(); i++) { + struct pci_dev *dev = node_to_amd_nb(i)->misc; /* * Don't enable translations just yet. That is the next @@ -644,7 +644,7 @@ static struct sys_device device_gart = { * Private Northbridge GATT initialization in case we cannot use the * AGP driver for some reason. */ -static __init int init_k8_gatt(struct agp_kern_info *info) +static __init int init_amd_gatt(struct agp_kern_info *info) { unsigned aper_size, gatt_size, new_aper_size; unsigned aper_base, new_aper_base; @@ -656,8 +656,8 @@ static __init int init_k8_gatt(struct agp_kern_info *info) aper_size = aper_base = info->aper_size = 0; dev = NULL; - for (i = 0; i < k8_northbridges.num; i++) { - dev = k8_northbridges.nb_misc[i]; + for (i = 0; i < amd_nb_num(); i++) { + dev = node_to_amd_nb(i)->misc; new_aper_base = read_aperture(dev, &new_aper_size); if (!new_aper_base) goto nommu; @@ -725,13 +725,13 @@ static void gart_iommu_shutdown(void) if (!no_agp) return; - if (!k8_northbridges.gart_supported) + if (!amd_nb_has_feature(AMD_NB_GART)) return; - for (i = 0; i < k8_northbridges.num; i++) { + for (i = 0; i < amd_nb_num(); i++) { u32 ctl; - dev = k8_northbridges.nb_misc[i]; + dev = node_to_amd_nb(i)->misc; pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); ctl &= ~GARTEN; @@ -749,14 +749,14 @@ int __init gart_iommu_init(void) unsigned long scratch; long i; - if (!k8_northbridges.gart_supported) + if (!amd_nb_has_feature(AMD_NB_GART)) return 0; #ifndef CONFIG_AGP_AMD64 no_agp = 1; #else /* Makefile puts PCI initialization via subsys_initcall first. */ - /* Add other K8 AGP bridge drivers here */ + /* Add other AMD AGP bridge drivers here */ no_agp = no_agp || (agp_amd64_init() < 0) || (agp_copy_info(agp_bridge, &info) < 0); @@ -765,7 +765,7 @@ int __init gart_iommu_init(void) if (no_iommu || (!force_iommu && max_pfn <= MAX_DMA32_PFN) || !gart_iommu_aperture || - (no_agp && init_k8_gatt(&info) < 0)) { + (no_agp && init_amd_gatt(&info) < 0)) { if (max_pfn > MAX_DMA32_PFN) { pr_warning("More than 4GB of memory but GART IOMMU not available.\n"); pr_warning("falling back to iommu=soft.\n"); diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 57d1868a86aa..c852041bfc3d 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -91,8 +91,7 @@ void exit_thread(void) void show_regs(struct pt_regs *regs) { show_registers(regs); - show_trace(NULL, regs, (unsigned long *)kernel_stack_pointer(regs), - regs->bp); + show_trace(NULL, regs, (unsigned long *)kernel_stack_pointer(regs)); } void show_regs_common(void) @@ -374,6 +373,7 @@ void default_idle(void) { if (hlt_use_halt()) { trace_power_start(POWER_CSTATE, 1, smp_processor_id()); + trace_cpu_idle(1, smp_processor_id()); current_thread_info()->status &= ~TS_POLLING; /* * TS_POLLING-cleared state must be visible before we @@ -444,6 +444,7 @@ EXPORT_SYMBOL_GPL(cpu_idle_wait); void mwait_idle_with_hints(unsigned long ax, unsigned long cx) { trace_power_start(POWER_CSTATE, (ax>>4)+1, smp_processor_id()); + trace_cpu_idle((ax>>4)+1, smp_processor_id()); if (!need_resched()) { if (cpu_has(¤t_cpu_data, X86_FEATURE_CLFLUSH_MONITOR)) clflush((void *)¤t_thread_info()->flags); @@ -460,6 +461,7 @@ static void mwait_idle(void) { if (!need_resched()) { trace_power_start(POWER_CSTATE, 1, smp_processor_id()); + trace_cpu_idle(1, smp_processor_id()); if (cpu_has(¤t_cpu_data, X86_FEATURE_CLFLUSH_MONITOR)) clflush((void *)¤t_thread_info()->flags); @@ -481,10 +483,12 @@ static void mwait_idle(void) static void poll_idle(void) { trace_power_start(POWER_CSTATE, 0, smp_processor_id()); + trace_cpu_idle(0, smp_processor_id()); local_irq_enable(); while (!need_resched()) cpu_relax(); - trace_power_end(0); + trace_power_end(smp_processor_id()); + trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id()); } /* diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 96586c3cbbbf..4b9befa0e347 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -113,8 +113,8 @@ void cpu_idle(void) stop_critical_timings(); pm_idle(); start_critical_timings(); - trace_power_end(smp_processor_id()); + trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id()); } tick_nohz_restart_sched_tick(); preempt_enable_no_resched(); diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index b3d7a3a04f38..4c818a738396 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -142,6 +142,8 @@ void cpu_idle(void) start_critical_timings(); trace_power_end(smp_processor_id()); + trace_cpu_idle(PWR_EVENT_EXIT, + smp_processor_id()); /* In many cases the interrupt that ended idle has already called exit_idle. But some idle diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c index 008b91eefa18..42eb3300dfc6 100644 --- a/arch/x86/kernel/pvclock.c +++ b/arch/x86/kernel/pvclock.c @@ -83,6 +83,11 @@ unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src) static atomic64_t last_value = ATOMIC64_INIT(0); +void pvclock_resume(void) +{ + atomic64_set(&last_value, 0); +} + cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src) { struct pvclock_shadow_time shadow; diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c index fda313ebbb03..c8e41e90f59c 100644 --- a/arch/x86/kernel/reboot_fixups_32.c +++ b/arch/x86/kernel/reboot_fixups_32.c @@ -43,17 +43,33 @@ static void rdc321x_reset(struct pci_dev *dev) outb(1, 0x92); } +static void ce4100_reset(struct pci_dev *dev) +{ + int i; + + for (i = 0; i < 10; i++) { + outb(0x2, 0xcf9); + udelay(50); + } +} + struct device_fixup { unsigned int vendor; unsigned int device; void (*reboot_fixup)(struct pci_dev *); }; +/* + * PCI ids solely used for fixups_table go here + */ +#define PCI_DEVICE_ID_INTEL_CE4100 0x0708 + static const struct device_fixup fixups_table[] = { { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset }, { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset }, { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset }, { PCI_VENDOR_ID_RDC, PCI_DEVICE_ID_RDC_R6030, rdc321x_reset }, +{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100, ce4100_reset }, }; /* diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c new file mode 100644 index 000000000000..2a26819bb6a8 --- /dev/null +++ b/arch/x86/kernel/resource.c @@ -0,0 +1,48 @@ +#include <linux/ioport.h> +#include <asm/e820.h> + +static void resource_clip(struct resource *res, resource_size_t start, + resource_size_t end) +{ + resource_size_t low = 0, high = 0; + + if (res->end < start || res->start > end) + return; /* no conflict */ + + if (res->start < start) + low = start - res->start; + + if (res->end > end) + high = res->end - end; + + /* Keep the area above or below the conflict, whichever is larger */ + if (low > high) + res->end = start - 1; + else + res->start = end + 1; +} + +static void remove_e820_regions(struct resource *avail) +{ + int i; + struct e820entry *entry; + + for (i = 0; i < e820.nr_map; i++) { + entry = &e820.map[i]; + + resource_clip(avail, entry->addr, + entry->addr + entry->size - 1); + } +} + +void arch_remove_reservations(struct resource *avail) +{ + /* Trim out BIOS areas (low 1MB and high 2MB) and E820 regions */ + if (avail->flags & IORESOURCE_MEM) { + if (avail->start < BIOS_END) + avail->start = BIOS_END; + resource_clip(avail, BIOS_ROM_BASE, BIOS_ROM_END); + + remove_e820_regions(avail); + } +} diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 21c6746338af..d3cfe26c0252 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -501,7 +501,18 @@ static inline unsigned long long get_total_mem(void) return total << PAGE_SHIFT; } -#define DEFAULT_BZIMAGE_ADDR_MAX 0x37FFFFFF +/* + * Keep the crash kernel below this limit. On 32 bits earlier kernels + * would limit the kernel to the low 512 MiB due to mapping restrictions. + * On 64 bits, kexec-tools currently limits us to 896 MiB; increase this + * limit once kexec-tools are fixed. + */ +#ifdef CONFIG_X86_32 +# define CRASH_KERNEL_ADDR_MAX (512 << 20) +#else +# define CRASH_KERNEL_ADDR_MAX (896 << 20) +#endif + static void __init reserve_crashkernel(void) { unsigned long long total_mem; @@ -520,10 +531,10 @@ static void __init reserve_crashkernel(void) const unsigned long long alignment = 16<<20; /* 16M */ /* - * kexec want bzImage is below DEFAULT_BZIMAGE_ADDR_MAX + * kexec want bzImage is below CRASH_KERNEL_ADDR_MAX */ crash_base = memblock_find_in_range(alignment, - DEFAULT_BZIMAGE_ADDR_MAX, crash_size, alignment); + CRASH_KERNEL_ADDR_MAX, crash_size, alignment); if (crash_base == MEMBLOCK_ERROR) { pr_info("crashkernel reservation failed - No suitable area found.\n"); @@ -694,7 +705,7 @@ static u64 __init get_max_mapped(void) void __init setup_arch(char **cmdline_p) { int acpi = 0; - int k8 = 0; + int amd = 0; unsigned long flags; #ifdef CONFIG_X86_32 @@ -769,7 +780,6 @@ void __init setup_arch(char **cmdline_p) x86_init.oem.arch_setup(); - resource_alloc_from_bottom = 0; iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1; setup_memory_map(); parse_setup_data(); @@ -981,12 +991,12 @@ void __init setup_arch(char **cmdline_p) acpi = acpi_numa_init(); #endif -#ifdef CONFIG_K8_NUMA +#ifdef CONFIG_AMD_NUMA if (!acpi) - k8 = !k8_numa_init(0, max_pfn); + amd = !amd_numa_init(0, max_pfn); #endif - initmem_init(0, max_pfn, acpi, k8); + initmem_init(0, max_pfn, acpi, amd); memblock_find_dma_reserve(); dma32_reserve_bootmem(); @@ -1035,10 +1045,7 @@ void __init setup_arch(char **cmdline_p) #endif init_apic_mappings(); - ioapic_init_mappings(); - - /* need to wait for io_apic is mapped */ - probe_nr_irqs_gsi(); + ioapic_and_gsi_init(); kvm_guest_init(); diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 083e99d1b7df..ee886fe10ef4 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -281,6 +281,13 @@ static void __cpuinit smp_callin(void) */ smp_store_cpu_info(cpuid); + /* + * This must be done before setting cpu_online_mask + * or calling notify_cpu_starting. + */ + set_cpu_sibling_map(raw_smp_processor_id()); + wmb(); + notify_cpu_starting(cpuid); /* @@ -316,16 +323,6 @@ notrace static void __cpuinit start_secondary(void *unused) */ check_tsc_sync_target(); - if (nmi_watchdog == NMI_IO_APIC) { - legacy_pic->mask(0); - enable_NMI_through_LVT0(); - legacy_pic->unmask(0); - } - - /* This must be done before setting cpu_online_mask */ - set_cpu_sibling_map(raw_smp_processor_id()); - wmb(); - /* * We need to hold call_lock, so there is no inconsistency * between the time smp_call_function() determines number of @@ -1061,8 +1058,6 @@ static int __init smp_sanity_check(unsigned max_cpus) printk(KERN_INFO "SMP mode deactivated.\n"); smpboot_clear_io_apic(); - localise_nmi_watchdog(); - connect_bsp_APIC(); setup_local_APIC(); end_local_APIC_setup(); @@ -1166,6 +1161,20 @@ out: preempt_enable(); } +void arch_disable_nonboot_cpus_begin(void) +{ + /* + * Avoid the smp alternatives switch during the disable_nonboot_cpus(). + * In the suspend path, we will be back in the SMP mode shortly anyways. + */ + skip_smp_alternatives = true; +} + +void arch_disable_nonboot_cpus_end(void) +{ + skip_smp_alternatives = false; +} + void arch_enable_nonboot_cpus_begin(void) { set_mtrr_aps_delayed_init(); @@ -1196,7 +1205,6 @@ void __init native_smp_cpus_done(unsigned int max_cpus) #ifdef CONFIG_X86_IO_APIC setup_ioapic_dest(); #endif - check_nmi_watchdog(); mtrr_aps_init(); } @@ -1341,8 +1349,6 @@ int native_cpu_disable(void) if (cpu == 0) return -EBUSY; - if (nmi_watchdog == NMI_LOCAL_APIC) - stop_apic_nmi_watchdog(NULL); clear_local_APIC(); cpu_disable_common(); diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c index b53c525368a7..938c8e10a19a 100644 --- a/arch/x86/kernel/stacktrace.c +++ b/arch/x86/kernel/stacktrace.c @@ -73,22 +73,22 @@ static const struct stacktrace_ops save_stack_ops_nosched = { */ void save_stack_trace(struct stack_trace *trace) { - dump_trace(current, NULL, NULL, 0, &save_stack_ops, trace); + dump_trace(current, NULL, NULL, &save_stack_ops, trace); if (trace->nr_entries < trace->max_entries) trace->entries[trace->nr_entries++] = ULONG_MAX; } EXPORT_SYMBOL_GPL(save_stack_trace); -void save_stack_trace_bp(struct stack_trace *trace, unsigned long bp) +void save_stack_trace_regs(struct stack_trace *trace, struct pt_regs *regs) { - dump_trace(current, NULL, NULL, bp, &save_stack_ops, trace); + dump_trace(current, regs, NULL, &save_stack_ops, trace); if (trace->nr_entries < trace->max_entries) trace->entries[trace->nr_entries++] = ULONG_MAX; } void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) { - dump_trace(tsk, NULL, NULL, 0, &save_stack_ops_nosched, trace); + dump_trace(tsk, NULL, NULL, &save_stack_ops_nosched, trace); if (trace->nr_entries < trace->max_entries) trace->entries[trace->nr_entries++] = ULONG_MAX; } diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c index fb5cc5e14cfa..25a28a245937 100644 --- a/arch/x86/kernel/time.c +++ b/arch/x86/kernel/time.c @@ -22,10 +22,6 @@ #include <asm/hpet.h> #include <asm/time.h> -#if defined(CONFIG_X86_32) && defined(CONFIG_X86_IO_APIC) -int timer_ack; -#endif - #ifdef CONFIG_X86_64 volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES; #endif @@ -63,20 +59,6 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) /* Keep nmi watchdog up to date */ inc_irq_stat(irq0_irqs); - /* Optimized out for !IO_APIC and x86_64 */ - if (timer_ack) { - /* - * Subtle, when I/O APICs are used we have to ack timer IRQ - * manually to deassert NMI lines for the watchdog if run - * on an 82489DX-based system. - */ - raw_spin_lock(&i8259A_lock); - outb(0x0c, PIC_MASTER_OCW3); - /* Ack the IRQ; AEOI will end it automatically. */ - inb(PIC_MASTER_POLL); - raw_spin_unlock(&i8259A_lock); - } - global_clock_event->event_handler(global_clock_event); /* MCA bus quirk: Acknowledge irq0 by setting bit 7 in port 0x61 */ diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S index 3af2dff58b21..075d130efcf9 100644 --- a/arch/x86/kernel/trampoline_64.S +++ b/arch/x86/kernel/trampoline_64.S @@ -127,7 +127,7 @@ startup_64: no_longmode: hlt jmp no_longmode -#include "verify_cpu_64.S" +#include "verify_cpu.S" # Careful these need to be in the same 64K segment as the above; tidt: diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index cb838ca42c96..c76aaca5694d 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -83,6 +83,8 @@ EXPORT_SYMBOL_GPL(used_vectors); static int ignore_nmis; +int unknown_nmi_panic; + static inline void conditional_sti(struct pt_regs *regs) { if (regs->flags & X86_EFLAGS_IF) @@ -300,6 +302,13 @@ gp_in_kernel: die("general protection fault", regs, error_code); } +static int __init setup_unknown_nmi_panic(char *str) +{ + unknown_nmi_panic = 1; + return 1; +} +__setup("unknown_nmi_panic", setup_unknown_nmi_panic); + static notrace __kprobes void mem_parity_error(unsigned char reason, struct pt_regs *regs) { @@ -342,9 +351,11 @@ io_check_error(unsigned char reason, struct pt_regs *regs) reason = (reason & 0xf) | 8; outb(reason, 0x61); - i = 2000; - while (--i) - udelay(1000); + i = 20000; + while (--i) { + touch_nmi_watchdog(); + udelay(100); + } reason &= ~8; outb(reason, 0x61); @@ -371,7 +382,7 @@ unknown_nmi_error(unsigned char reason, struct pt_regs *regs) reason, smp_processor_id()); printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n"); - if (panic_on_unrecovered_nmi) + if (unknown_nmi_panic || panic_on_unrecovered_nmi) panic("NMI: Not continuing"); printk(KERN_EMERG "Dazed and confused, but trying to continue\n"); @@ -397,20 +408,8 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs) if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) return; - -#ifndef CONFIG_LOCKUP_DETECTOR - /* - * Ok, so this is none of the documented NMI sources, - * so it must be the NMI watchdog. - */ - if (nmi_watchdog_tick(regs, reason)) - return; - if (!do_nmi_callback(regs, cpu)) -#endif /* !CONFIG_LOCKUP_DETECTOR */ - unknown_nmi_error(reason, regs); -#else - unknown_nmi_error(reason, regs); #endif + unknown_nmi_error(reason, regs); return; } @@ -446,14 +445,12 @@ do_nmi(struct pt_regs *regs, long error_code) void stop_nmi(void) { - acpi_nmi_disable(); ignore_nmis++; } void restart_nmi(void) { ignore_nmis--; - acpi_nmi_enable(); } /* May run on IST stack. */ diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 0c40d8b72416..356a0d455cf9 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -872,6 +872,9 @@ __cpuinit int unsynchronized_tsc(void) if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) return 0; + + if (tsc_clocksource_reliable) + return 0; /* * Intel systems are normally all synchronized. * Exceptions must mark TSC as unstable: @@ -879,14 +882,92 @@ __cpuinit int unsynchronized_tsc(void) if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) { /* assume multi socket systems are not synchronized: */ if (num_possible_cpus() > 1) - tsc_unstable = 1; + return 1; } - return tsc_unstable; + return 0; +} + + +static void tsc_refine_calibration_work(struct work_struct *work); +static DECLARE_DELAYED_WORK(tsc_irqwork, tsc_refine_calibration_work); +/** + * tsc_refine_calibration_work - Further refine tsc freq calibration + * @work - ignored. + * + * This functions uses delayed work over a period of a + * second to further refine the TSC freq value. Since this is + * timer based, instead of loop based, we don't block the boot + * process while this longer calibration is done. + * + * If there are any calibration anomolies (too many SMIs, etc), + * or the refined calibration is off by 1% of the fast early + * calibration, we throw out the new calibration and use the + * early calibration. + */ +static void tsc_refine_calibration_work(struct work_struct *work) +{ + static u64 tsc_start = -1, ref_start; + static int hpet; + u64 tsc_stop, ref_stop, delta; + unsigned long freq; + + /* Don't bother refining TSC on unstable systems */ + if (check_tsc_unstable()) + goto out; + + /* + * Since the work is started early in boot, we may be + * delayed the first time we expire. So set the workqueue + * again once we know timers are working. + */ + if (tsc_start == -1) { + /* + * Only set hpet once, to avoid mixing hardware + * if the hpet becomes enabled later. + */ + hpet = is_hpet_enabled(); + schedule_delayed_work(&tsc_irqwork, HZ); + tsc_start = tsc_read_refs(&ref_start, hpet); + return; + } + + tsc_stop = tsc_read_refs(&ref_stop, hpet); + + /* hpet or pmtimer available ? */ + if (!hpet && !ref_start && !ref_stop) + goto out; + + /* Check, whether the sampling was disturbed by an SMI */ + if (tsc_start == ULLONG_MAX || tsc_stop == ULLONG_MAX) + goto out; + + delta = tsc_stop - tsc_start; + delta *= 1000000LL; + if (hpet) + freq = calc_hpet_ref(delta, ref_start, ref_stop); + else + freq = calc_pmtimer_ref(delta, ref_start, ref_stop); + + /* Make sure we're within 1% */ + if (abs(tsc_khz - freq) > tsc_khz/100) + goto out; + + tsc_khz = freq; + printk(KERN_INFO "Refined TSC clocksource calibration: " + "%lu.%03lu MHz.\n", (unsigned long)tsc_khz / 1000, + (unsigned long)tsc_khz % 1000); + +out: + clocksource_register_khz(&clocksource_tsc, tsc_khz); } -static void __init init_tsc_clocksource(void) + +static int __init init_tsc_clocksource(void) { + if (!cpu_has_tsc || tsc_disabled > 0) + return 0; + if (tsc_clocksource_reliable) clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY; /* lower the rating if we already know its unstable: */ @@ -894,8 +975,14 @@ static void __init init_tsc_clocksource(void) clocksource_tsc.rating = 0; clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS; } - clocksource_register_khz(&clocksource_tsc, tsc_khz); + schedule_delayed_work(&tsc_irqwork, 0); + return 0; } +/* + * We use device_initcall here, to ensure we run after the hpet + * is fully initialized, which may occur at fs_initcall time. + */ +device_initcall(init_tsc_clocksource); void __init tsc_init(void) { @@ -949,6 +1036,5 @@ void __init tsc_init(void) mark_tsc_unstable("TSCs unsynchronized"); check_system_tsc_reliable(); - init_tsc_clocksource(); } diff --git a/arch/x86/kernel/verify_cpu_64.S b/arch/x86/kernel/verify_cpu.S index 56a8c2a867d9..0edefc19a113 100644 --- a/arch/x86/kernel/verify_cpu_64.S +++ b/arch/x86/kernel/verify_cpu.S @@ -7,6 +7,7 @@ * Copyright (c) 2007 Andi Kleen (ak@suse.de) * Copyright (c) 2007 Eric Biederman (ebiederm@xmission.com) * Copyright (c) 2007 Vivek Goyal (vgoyal@in.ibm.com) + * Copyright (c) 2010 Kees Cook (kees.cook@canonical.com) * * This source code is licensed under the GNU General Public License, * Version 2. See the file COPYING for more details. @@ -14,18 +15,17 @@ * This is a common code for verification whether CPU supports * long mode and SSE or not. It is not called directly instead this * file is included at various places and compiled in that context. - * Following are the current usage. + * This file is expected to run in 32bit code. Currently: * - * This file is included by both 16bit and 32bit code. + * arch/x86/boot/compressed/head_64.S: Boot cpu verification + * arch/x86/kernel/trampoline_64.S: secondary processor verfication + * arch/x86/kernel/head_32.S: processor startup * - * arch/x86_64/boot/setup.S : Boot cpu verification (16bit) - * arch/x86_64/boot/compressed/head.S: Boot cpu verification (32bit) - * arch/x86_64/kernel/trampoline.S: secondary processor verfication (16bit) - * arch/x86_64/kernel/acpi/wakeup.S:Verfication at resume (16bit) - * - * verify_cpu, returns the status of cpu check in register %eax. + * verify_cpu, returns the status of longmode and SSE in register %eax. * 0: Success 1: Failure * + * On Intel, the XD_DISABLE flag will be cleared as a side-effect. + * * The caller needs to check for the error code and take the action * appropriately. Either display a message or halt. */ @@ -62,8 +62,41 @@ verify_cpu: cmpl $0x444d4163,%ecx jnz verify_cpu_noamd mov $1,%di # cpu is from AMD + jmp verify_cpu_check verify_cpu_noamd: + cmpl $0x756e6547,%ebx # GenuineIntel? + jnz verify_cpu_check + cmpl $0x49656e69,%edx + jnz verify_cpu_check + cmpl $0x6c65746e,%ecx + jnz verify_cpu_check + + # only call IA32_MISC_ENABLE when: + # family > 6 || (family == 6 && model >= 0xd) + movl $0x1, %eax # check CPU family and model + cpuid + movl %eax, %ecx + + andl $0x0ff00f00, %eax # mask family and extended family + shrl $8, %eax + cmpl $6, %eax + ja verify_cpu_clear_xd # family > 6, ok + jb verify_cpu_check # family < 6, skip + + andl $0x000f00f0, %ecx # mask model and extended model + shrl $4, %ecx + cmpl $0xd, %ecx + jb verify_cpu_check # family == 6, model < 0xd, skip + +verify_cpu_clear_xd: + movl $MSR_IA32_MISC_ENABLE, %ecx + rdmsr + btrl $2, %edx # clear MSR_IA32_MISC_ENABLE_XD_DISABLE + jnc verify_cpu_check # only write MSR if bit was changed + wrmsr + +verify_cpu_check: movl $0x1,%eax # Does the cpu have what it takes cpuid andl $REQUIRED_MASK0,%edx diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index e03530aebfd0..bf4700755184 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -69,7 +69,7 @@ jiffies_64 = jiffies; PHDRS { text PT_LOAD FLAGS(5); /* R_E */ - data PT_LOAD FLAGS(7); /* RWE */ + data PT_LOAD FLAGS(6); /* RW_ */ #ifdef CONFIG_X86_64 user PT_LOAD FLAGS(5); /* R_E */ #ifdef CONFIG_SMP @@ -116,6 +116,10 @@ SECTIONS EXCEPTION_TABLE(16) :text = 0x9090 +#if defined(CONFIG_DEBUG_RODATA) + /* .text should occupy whole number of pages */ + . = ALIGN(PAGE_SIZE); +#endif X64_ALIGN_DEBUG_RODATA_BEGIN RO_DATA(PAGE_SIZE) X64_ALIGN_DEBUG_RODATA_END @@ -335,7 +339,7 @@ SECTIONS __bss_start = .; *(.bss..page_aligned) *(.bss) - . = ALIGN(4); + . = ALIGN(PAGE_SIZE); __bss_stop = .; } diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c index 9c253bd65e24..547128546cc3 100644 --- a/arch/x86/kernel/xsave.c +++ b/arch/x86/kernel/xsave.c @@ -394,7 +394,8 @@ static void __init setup_xstate_init(void) * Setup init_xstate_buf to represent the init state of * all the features managed by the xsave */ - init_xstate_buf = alloc_bootmem(xstate_size); + init_xstate_buf = alloc_bootmem_align(xstate_size, + __alignof__(struct xsave_struct)); init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT; clts(); |
