diff options
Diffstat (limited to 'arch/tile/include/asm')
| -rw-r--r-- | arch/tile/include/asm/cacheflush.h | 52 | ||||
| -rw-r--r-- | arch/tile/include/asm/io.h | 15 | ||||
| -rw-r--r-- | arch/tile/include/asm/pci-bridge.h | 117 | ||||
| -rw-r--r-- | arch/tile/include/asm/pci.h | 107 | ||||
| -rw-r--r-- | arch/tile/include/asm/processor.h | 10 | ||||
| -rw-r--r-- | arch/tile/include/asm/signal.h | 2 |
6 files changed, 115 insertions, 188 deletions
diff --git a/arch/tile/include/asm/cacheflush.h b/arch/tile/include/asm/cacheflush.h index c5741da4eeac..14a3f8556ace 100644 --- a/arch/tile/include/asm/cacheflush.h +++ b/arch/tile/include/asm/cacheflush.h @@ -137,4 +137,56 @@ static inline void finv_buffer(void *buffer, size_t size) mb_incoherent(); } +/* + * Flush & invalidate a VA range that is homed remotely on a single core, + * waiting until the memory controller holds the flushed values. + */ +static inline void finv_buffer_remote(void *buffer, size_t size) +{ + char *p; + int i; + + /* + * Flush and invalidate the buffer out of the local L1/L2 + * and request the home cache to flush and invalidate as well. + */ + __finv_buffer(buffer, size); + + /* + * Wait for the home cache to acknowledge that it has processed + * all the flush-and-invalidate requests. This does not mean + * that the flushed data has reached the memory controller yet, + * but it does mean the home cache is processing the flushes. + */ + __insn_mf(); + + /* + * Issue a load to the last cache line, which can't complete + * until all the previously-issued flushes to the same memory + * controller have also completed. If we weren't striping + * memory, that one load would be sufficient, but since we may + * be, we also need to back up to the last load issued to + * another memory controller, which would be the point where + * we crossed an 8KB boundary (the granularity of striping + * across memory controllers). Keep backing up and doing this + * until we are before the beginning of the buffer, or have + * hit all the controllers. + */ + for (i = 0, p = (char *)buffer + size - 1; + i < (1 << CHIP_LOG_NUM_MSHIMS()) && p >= (char *)buffer; + ++i) { + const unsigned long STRIPE_WIDTH = 8192; + + /* Force a load instruction to issue. */ + *(volatile char *)p; + + /* Jump to end of previous stripe. */ + p -= STRIPE_WIDTH; + p = (char *)((unsigned long)p | (STRIPE_WIDTH - 1)); + } + + /* Wait for the loads (and thus flushes) to have completed. */ + __insn_mf(); +} + #endif /* _ASM_TILE_CACHEFLUSH_H */ diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h index ee43328713ab..d3cbb9b14cbe 100644 --- a/arch/tile/include/asm/io.h +++ b/arch/tile/include/asm/io.h @@ -55,9 +55,6 @@ extern void iounmap(volatile void __iomem *addr); #define ioremap_writethrough(physaddr, size) ioremap(physaddr, size) #define ioremap_fullcache(physaddr, size) ioremap(physaddr, size) -void __iomem *ioport_map(unsigned long port, unsigned int len); -extern inline void ioport_unmap(void __iomem *addr) {} - #define mmiowb() /* Conversion between virtual and physical mappings. */ @@ -189,12 +186,22 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src, * we never run, uses them unconditionally. */ -static inline int ioport_panic(void) +static inline long ioport_panic(void) { panic("inb/outb and friends do not exist on tile"); return 0; } +static inline void __iomem *ioport_map(unsigned long port, unsigned int len) +{ + return (void __iomem *) ioport_panic(); +} + +static inline void ioport_unmap(void __iomem *addr) +{ + ioport_panic(); +} + static inline u8 inb(unsigned long addr) { return ioport_panic(); diff --git a/arch/tile/include/asm/pci-bridge.h b/arch/tile/include/asm/pci-bridge.h deleted file mode 100644 index e853b0e2793b..000000000000 --- a/arch/tile/include/asm/pci-bridge.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_PCI_BRIDGE_H -#define _ASM_TILE_PCI_BRIDGE_H - -#include <linux/ioport.h> -#include <linux/pci.h> - -struct device_node; -struct pci_controller; - -/* - * pci_io_base returns the memory address at which you can access - * the I/O space for PCI bus number `bus' (or NULL on error). - */ -extern void __iomem *pci_bus_io_base(unsigned int bus); -extern unsigned long pci_bus_io_base_phys(unsigned int bus); -extern unsigned long pci_bus_mem_base_phys(unsigned int bus); - -/* Allocate a new PCI host bridge structure */ -extern struct pci_controller *pcibios_alloc_controller(void); - -/* Helper function for setting up resources */ -extern void pci_init_resource(struct resource *res, unsigned long start, - unsigned long end, int flags, char *name); - -/* Get the PCI host controller for a bus */ -extern struct pci_controller *pci_bus_to_hose(int bus); - -/* - * Structure of a PCI controller (host bridge) - */ -struct pci_controller { - int index; /* PCI domain number */ - struct pci_bus *root_bus; - - int first_busno; - int last_busno; - - int hv_cfg_fd[2]; /* config{0,1} fds for this PCIe controller */ - int hv_mem_fd; /* fd to Hypervisor for MMIO operations */ - - struct pci_ops *ops; - - int irq_base; /* Base IRQ from the Hypervisor */ - int plx_gen1; /* flag for PLX Gen 1 configuration */ - - /* Address ranges that are routed to this controller/bridge. */ - struct resource mem_resources[3]; -}; - -static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus) -{ - return bus->sysdata; -} - -extern void setup_indirect_pci_nomap(struct pci_controller *hose, - void __iomem *cfg_addr, void __iomem *cfg_data); -extern void setup_indirect_pci(struct pci_controller *hose, - u32 cfg_addr, u32 cfg_data); -extern void setup_grackle(struct pci_controller *hose); - -extern unsigned char common_swizzle(struct pci_dev *, unsigned char *); - -/* - * The following code swizzles for exactly one bridge. The routine - * common_swizzle below handles multiple bridges. But there are a - * some boards that don't follow the PCI spec's suggestion so we - * break this piece out separately. - */ -static inline unsigned char bridge_swizzle(unsigned char pin, - unsigned char idsel) -{ - return (((pin-1) + idsel) % 4) + 1; -} - -/* - * The following macro is used to lookup irqs in a standard table - * format for those PPC systems that do not already have PCI - * interrupts properly routed. - */ -/* FIXME - double check this */ -#define PCI_IRQ_TABLE_LOOKUP ({ \ - long _ctl_ = -1; \ - if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \ - _ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \ - _ctl_; \ -}) - -/* - * Scan the buses below a given PCI host bridge and assign suitable - * resources to all devices found. - */ -extern int pciauto_bus_scan(struct pci_controller *, int); - -#ifdef CONFIG_PCI -extern unsigned long pci_address_to_pio(phys_addr_t address); -#else -static inline unsigned long pci_address_to_pio(phys_addr_t address) -{ - return (unsigned long)-1; -} -#endif - -#endif /* _ASM_TILE_PCI_BRIDGE_H */ diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h index b0c15da2d5d5..c3fc458a0d32 100644 --- a/arch/tile/include/asm/pci.h +++ b/arch/tile/include/asm/pci.h @@ -15,7 +15,29 @@ #ifndef _ASM_TILE_PCI_H #define _ASM_TILE_PCI_H -#include <asm/pci-bridge.h> +#include <linux/pci.h> + +/* + * Structure of a PCI controller (host bridge) + */ +struct pci_controller { + int index; /* PCI domain number */ + struct pci_bus *root_bus; + + int first_busno; + int last_busno; + + int hv_cfg_fd[2]; /* config{0,1} fds for this PCIe controller */ + int hv_mem_fd; /* fd to Hypervisor for MMIO operations */ + + struct pci_ops *ops; + + int irq_base; /* Base IRQ from the Hypervisor */ + int plx_gen1; /* flag for PLX Gen 1 configuration */ + + /* Address ranges that are routed to this controller/bridge. */ + struct resource mem_resources[3]; +}; /* * The hypervisor maps the entirety of CPA-space as bus addresses, so @@ -24,56 +46,12 @@ */ #define PCI_DMA_BUS_IS_PHYS 1 -struct pci_controller *pci_bus_to_hose(int bus); -unsigned char __init common_swizzle(struct pci_dev *dev, unsigned char *pinp); int __init tile_pci_init(void); -void pci_iounmap(struct pci_dev *dev, void __iomem *addr); -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); -void __devinit pcibios_fixup_bus(struct pci_bus *bus); -int __devinit _tile_cfg_read(struct pci_controller *hose, - int bus, - int slot, - int function, - int offset, - int size, - u32 *val); -int __devinit _tile_cfg_write(struct pci_controller *hose, - int bus, - int slot, - int function, - int offset, - int size, - u32 val); +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); +static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {} -/* - * These are used to to config reads and writes in the early stages of - * setup before the driver infrastructure has been set up enough to be - * able to do config reads and writes. - */ -#define early_cfg_read(where, size, value) \ - _tile_cfg_read(controller, \ - current_bus, \ - pci_slot, \ - pci_fn, \ - where, \ - size, \ - value) - -#define early_cfg_write(where, size, value) \ - _tile_cfg_write(controller, \ - current_bus, \ - pci_slot, \ - pci_fn, \ - where, \ - size, \ - value) - - - -#define PCICFG_BYTE 1 -#define PCICFG_WORD 2 -#define PCICFG_DWORD 4 +void __devinit pcibios_fixup_bus(struct pci_bus *bus); #define TILE_NUM_PCIE 2 @@ -88,33 +66,33 @@ static inline int pci_proc_domain(struct pci_bus *bus) } /* - * I/O space is currently not supported. + * pcibios_assign_all_busses() tells whether or not the bus numbers + * should be reassigned, in case the BIOS didn't do it correctly, or + * in case we don't have a BIOS and we want to let Linux do it. */ +static inline int pcibios_assign_all_busses(void) +{ + return 1; +} -#define TILE_PCIE_LOWER_IO 0x0 -#define TILE_PCIE_UPPER_IO 0x10000 -#define TILE_PCIE_PCIE_IO_SIZE 0x0000FFFF - -#define _PAGE_NO_CACHE 0 -#define _PAGE_GUARDED 0 - - -#define pcibios_assign_all_busses() pci_assign_all_buses -extern int pci_assign_all_buses; - +/* + * No special bus mastering setup handling. + */ static inline void pcibios_set_master(struct pci_dev *dev) { - /* No special bus mastering setup handling */ } #define PCIBIOS_MIN_MEM 0 -#define PCIBIOS_MIN_IO TILE_PCIE_LOWER_IO +#define PCIBIOS_MIN_IO 0 /* * This flag tells if the platform is TILEmpower that needs * special configuration for the PLX switch chip. */ -extern int blade_pci; +extern int tile_plx_gen1; + +/* Use any cpu for PCI. */ +#define cpumask_of_pcibus(bus) cpu_online_mask /* implement the pci_ DMA API in terms of the generic device dma_ one */ #include <asm-generic/pci-dma-compat.h> @@ -122,7 +100,4 @@ extern int blade_pci; /* generic pci stuff */ #include <asm-generic/pci.h> -/* Use any cpu for PCI. */ -#define cpumask_of_pcibus(bus) cpu_online_mask - #endif /* _ASM_TILE_PCI_H */ diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h index 1747ff3946b2..a9e7c8760334 100644 --- a/arch/tile/include/asm/processor.h +++ b/arch/tile/include/asm/processor.h @@ -292,8 +292,18 @@ extern int kstack_hash; /* Are we using huge pages in the TLB for kernel data? */ extern int kdata_huge; +/* Support standard Linux prefetching. */ +#define ARCH_HAS_PREFETCH +#define prefetch(x) __builtin_prefetch(x) #define PREFETCH_STRIDE CHIP_L2_LINE_SIZE() +/* Bring a value into the L1D, faulting the TLB if necessary. */ +#ifdef __tilegx__ +#define prefetch_L1(x) __insn_prefetch_l1_fault((void *)(x)) +#else +#define prefetch_L1(x) __insn_prefetch_L1((void *)(x)) +#endif + #else /* __ASSEMBLY__ */ /* Do some slow action (e.g. read a slow SPR). */ diff --git a/arch/tile/include/asm/signal.h b/arch/tile/include/asm/signal.h index c1ee1d61d44c..81d92a45cd4b 100644 --- a/arch/tile/include/asm/signal.h +++ b/arch/tile/include/asm/signal.h @@ -25,7 +25,7 @@ #if defined(__KERNEL__) && !defined(__ASSEMBLY__) struct pt_regs; -int restore_sigcontext(struct pt_regs *, struct sigcontext __user *, long *); +int restore_sigcontext(struct pt_regs *, struct sigcontext __user *); int setup_sigcontext(struct sigcontext __user *, struct pt_regs *); void do_signal(struct pt_regs *regs); #endif |
