3 files changed, 354 insertions, 1 deletions

diff --git a/arch/powerpc/platforms/pasemi/Makefile b/arch/powerpc/platforms/pasemi/Makefile
index e657ccae90a9..e90265f610ef 100644
--- a/arch/powerpc/platforms/pasemi/Makefile
+++ b/arch/powerpc/platforms/pasemi/Makefile
@@ -1,2 +1,2 @@
-obj-y	+= setup.o pci.o time.o idle.o powersave.o iommu.o
+obj-y	+= setup.o pci.o time.o idle.o powersave.o iommu.o gpio_mdio.o
 
diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c
new file mode 100644
index 000000000000..b1d3b6b420ae
--- /dev/null
+++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c
@@ -0,0 +1,339 @@
+/*
+ * Copyright (C) 2006-2007 PA Semi, Inc
+ *
+ * Author: Olof Johansson, PA Semi
+ *
+ * Maintained by: Olof Johansson <olof@lixom.net>
+ *
+ * Based on drivers/net/fs_enet/mii-bitbang.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <asm/of_platform.h>
+
+#define DELAY 1
+
+static void __iomem *gpio_regs;
+
+struct gpio_priv {
+	int mdc_pin;
+	int mdio_pin;
+};
+
+#define MDC_PIN(bus)	(((struct gpio_priv *)bus->priv)->mdc_pin)
+#define MDIO_PIN(bus)	(((struct gpio_priv *)bus->priv)->mdio_pin)
+
+static inline void mdio_lo(struct mii_bus *bus)
+{
+	out_le32(gpio_regs+0x10, 1 << MDIO_PIN(bus));
+}
+
+static inline void mdio_hi(struct mii_bus *bus)
+{
+	out_le32(gpio_regs, 1 << MDIO_PIN(bus));
+}
+
+static inline void mdc_lo(struct mii_bus *bus)
+{
+	out_le32(gpio_regs+0x10, 1 << MDC_PIN(bus));
+}
+
+static inline void mdc_hi(struct mii_bus *bus)
+{
+	out_le32(gpio_regs, 1 << MDC_PIN(bus));
+}
+
+static inline void mdio_active(struct mii_bus *bus)
+{
+	out_le32(gpio_regs+0x20, (1 << MDC_PIN(bus)) | (1 << MDIO_PIN(bus)));
+}
+
+static inline void mdio_tristate(struct mii_bus *bus)
+{
+	out_le32(gpio_regs+0x30, (1 << MDIO_PIN(bus)));
+}
+
+static inline int mdio_read(struct mii_bus *bus)
+{
+	return !!(in_le32(gpio_regs+0x40) & (1 << MDIO_PIN(bus)));
+}
+
+static void clock_out(struct mii_bus *bus, int bit)
+{
+	if (bit)
+		mdio_hi(bus);
+	else
+		mdio_lo(bus);
+	udelay(DELAY);
+	mdc_hi(bus);
+	udelay(DELAY);
+	mdc_lo(bus);
+}
+
+/* Utility to send the preamble, address, and register (common to read and write). */
+static void bitbang_pre(struct mii_bus *bus, int read, u8 addr, u8 reg)
+{
+	int i;
+
+	/* CFE uses a really long preamble (40 bits). We'll do the same. */
+	mdio_active(bus);
+	for (i = 0; i < 40; i++) {
+		clock_out(bus, 1);
+	}
+
+	/* send the start bit (01) and the read opcode (10) or write (10) */
+	clock_out(bus, 0);
+	clock_out(bus, 1);
+
+	clock_out(bus, read);
+	clock_out(bus, !read);
+
+	/* send the PHY address */
+	for (i = 0; i < 5; i++) {
+		clock_out(bus, (addr & 0x10) != 0);
+		addr <<= 1;
+	}
+
+	/* send the register address */
+	for (i = 0; i < 5; i++) {
+		clock_out(bus, (reg & 0x10) != 0);
+		reg <<= 1;
+	}
+}
+
+static int gpio_mdio_read(struct mii_bus *bus, int phy_id, int location)
+{
+	u16 rdreg;
+	int ret, i;
+	u8 addr = phy_id & 0xff;
+	u8 reg = location & 0xff;
+
+	bitbang_pre(bus, 1, addr, reg);
+
+	/* tri-state our MDIO I/O pin so we can read */
+	mdio_tristate(bus);
+	udelay(DELAY);
+	mdc_hi(bus);
+	udelay(DELAY);
+	mdc_lo(bus);
+
+	/* read 16 bits of register data, MSB first */
+	rdreg = 0;
+	for (i = 0; i < 16; i++) {
+		mdc_lo(bus);
+		udelay(DELAY);
+		mdc_hi(bus);
+		udelay(DELAY);
+		mdc_lo(bus);
+		udelay(DELAY);
+		rdreg <<= 1;
+		rdreg |= mdio_read(bus);
+	}
+
+	mdc_hi(bus);
+	udelay(DELAY);
+	mdc_lo(bus);
+	udelay(DELAY);
+
+	ret = rdreg;
+
+	return ret;
+}
+
+static int gpio_mdio_write(struct mii_bus *bus, int phy_id, int location, u16 val)
+{
+	int i;
+
+	u8 addr = phy_id & 0xff;
+	u8 reg = location & 0xff;
+	u16 value = val & 0xffff;
+
+	bitbang_pre(bus, 0, addr, reg);
+
+	/* send the turnaround (10) */
+	mdc_lo(bus);
+	mdio_hi(bus);
+	udelay(DELAY);
+	mdc_hi(bus);
+	udelay(DELAY);
+	mdc_lo(bus);
+	mdio_lo(bus);
+	udelay(DELAY);
+	mdc_hi(bus);
+	udelay(DELAY);
+
+	/* write 16 bits of register data, MSB first */
+	for (i = 0; i < 16; i++) {
+		mdc_lo(bus);
+		if (value & 0x8000)
+			mdio_hi(bus);
+		else
+			mdio_lo(bus);
+		udelay(DELAY);
+		mdc_hi(bus);
+		udelay(DELAY);
+		value <<= 1;
+	}
+
+	/*
+	 * Tri-state the MDIO line.
+	 */
+	mdio_tristate(bus);
+	mdc_lo(bus);
+	udelay(DELAY);
+	mdc_hi(bus);
+	udelay(DELAY);
+	return 0;
+}
+
+static int gpio_mdio_reset(struct mii_bus *bus)
+{
+	/*nothing here - dunno how to reset it*/
+	return 0;
+}
+
+
+static int __devinit gpio_mdio_probe(struct of_device *ofdev,
+				     const struct of_device_id *match)
+{
+	struct device *dev = &ofdev->dev;
+	struct device_node *np = ofdev->node;
+	struct device_node *gpio_np;
+	struct mii_bus *new_bus;
+	struct resource res;
+	struct gpio_priv *priv;
+	const unsigned int *prop;
+	int err = 0;
+	int i;
+
+	gpio_np = of_find_compatible_node(NULL, "gpio", "1682m-gpio");
+
+	if (!gpio_np)
+		return -ENODEV;
+
+	err = of_address_to_resource(gpio_np, 0, &res);
+	of_node_put(gpio_np);
+
+	if (err)
+		return -EINVAL;
+
+	if (!gpio_regs)
+		gpio_regs = ioremap(res.start, 0x100);
+
+	if (!gpio_regs)
+		return -EPERM;
+
+	priv = kzalloc(sizeof(struct gpio_priv), GFP_KERNEL);
+	if (priv == NULL)
+		return -ENOMEM;
+
+	new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
+
+	if (new_bus == NULL)
+		return -ENOMEM;
+
+	new_bus->name = "pasemi gpio mdio bus",
+	new_bus->read = &gpio_mdio_read,
+	new_bus->write = &gpio_mdio_write,
+	new_bus->reset = &gpio_mdio_reset,
+
+	prop = get_property(np, "reg", NULL);
+	new_bus->id = *prop;
+	new_bus->priv = priv;
+
+	new_bus->phy_mask = 0;
+
+	new_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
+	for(i = 0; i < PHY_MAX_ADDR; ++i)
+		new_bus->irq[i] = irq_create_mapping(NULL, 10);
+
+
+	prop = get_property(np, "mdc-pin", NULL);
+	priv->mdc_pin = *prop;
+
+	prop = get_property(np, "mdio-pin", NULL);
+	priv->mdio_pin = *prop;
+
+	new_bus->dev = dev;
+	dev_set_drvdata(dev, new_bus);
+
+	err = mdiobus_register(new_bus);
+
+	if (0 != err) {
+		printk(KERN_ERR "%s: Cannot register as MDIO bus, err %d\n",
+				new_bus->name, err);
+		goto bus_register_fail;
+	}
+
+	return 0;
+
+bus_register_fail:
+	kfree(new_bus);
+
+	return err;
+}
+
+
+static int gpio_mdio_remove(struct of_device *dev)
+{
+	struct mii_bus *bus = dev_get_drvdata(&dev->dev);
+
+	mdiobus_unregister(bus);
+
+	dev_set_drvdata(&dev->dev, NULL);
+
+	kfree(bus->priv);
+	bus->priv = NULL;
+	kfree(bus);
+
+	return 0;
+}
+
+static struct of_device_id gpio_mdio_match[] =
+{
+	{
+		.compatible      = "gpio-mdio",
+	},
+	{},
+};
+
+static struct of_platform_driver gpio_mdio_driver =
+{
+	.name		= "gpio-mdio-bitbang",
+	.match_table	= gpio_mdio_match,
+	.probe		= gpio_mdio_probe,
+	.remove		= gpio_mdio_remove,
+};
+
+int gpio_mdio_init(void)
+{
+	return of_register_platform_driver(&gpio_mdio_driver);
+}
+
+void gpio_mdio_exit(void)
+{
+	of_unregister_platform_driver(&gpio_mdio_driver);
+}
+device_initcall(gpio_mdio_init);
+
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index ffd96e947481..9944ffc02eeb 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -209,6 +209,20 @@ static void __init pas_init_early(void)
 	iommu_init_early_pasemi();
 }
 
+static struct of_device_id pasemi_bus_ids[] = {
+	{ .type = "sdc", },
+	{},
+};
+
+static int __init pasemi_publish_devices(void)
+{
+	/* Publish OF platform devices for southbridge IOs */
+	of_platform_bus_probe(NULL, pasemi_bus_ids, NULL);
+
+	return 0;
+}
+device_initcall(pasemi_publish_devices);
+
 
 /*
  * Called very early, MMU is off, device-tree isn't unflattened