diff options
Diffstat (limited to 'arch/mips/lib')
| -rw-r--r-- | arch/mips/lib/csum_partial.S | 282 | ||||
| -rw-r--r-- | arch/mips/lib/memcpy.S | 416 | ||||
| -rw-r--r-- | arch/mips/lib/memset.S | 146 | ||||
| -rw-r--r-- | arch/mips/lib/strlen_user.S | 36 | ||||
| -rw-r--r-- | arch/mips/lib/strncpy_user.S | 40 | ||||
| -rw-r--r-- | arch/mips/lib/strnlen_user.S | 36 |
6 files changed, 638 insertions, 318 deletions
diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S index a6adffbb4e5f..2e4825e48388 100644 --- a/arch/mips/lib/csum_partial.S +++ b/arch/mips/lib/csum_partial.S @@ -8,6 +8,7 @@ * Copyright (C) 1998, 1999 Ralf Baechle * Copyright (C) 1999 Silicon Graphics, Inc. * Copyright (C) 2007 Maciej W. Rozycki + * Copyright (C) 2014 Imagination Technologies Ltd. */ #include <linux/errno.h> #include <asm/asm.h> @@ -296,7 +297,7 @@ LEAF(csum_partial) * checksum and copy routines based on memcpy.S * * csum_partial_copy_nocheck(src, dst, len, sum) - * __csum_partial_copy_user(src, dst, len, sum, errp) + * __csum_partial_copy_kernel(src, dst, len, sum, errp) * * See "Spec" in memcpy.S for details. Unlike __copy_user, all * function in this file use the standard calling convention. @@ -327,20 +328,58 @@ LEAF(csum_partial) * These handlers do not need to overwrite any data. */ -#define EXC(inst_reg,addr,handler) \ -9: inst_reg, addr; \ - .section __ex_table,"a"; \ - PTR 9b, handler; \ - .previous +/* Instruction type */ +#define LD_INSN 1 +#define ST_INSN 2 +#define LEGACY_MODE 1 +#define EVA_MODE 2 +#define USEROP 1 +#define KERNELOP 2 + +/* + * Wrapper to add an entry in the exception table + * in case the insn causes a memory exception. + * Arguments: + * insn : Load/store instruction + * type : Instruction type + * reg : Register + * addr : Address + * handler : Exception handler + */ +#define EXC(insn, type, reg, addr, handler) \ + .if \mode == LEGACY_MODE; \ +9: insn reg, addr; \ + .section __ex_table,"a"; \ + PTR 9b, handler; \ + .previous; \ + /* This is enabled in EVA mode */ \ + .else; \ + /* If loading from user or storing to user */ \ + .if ((\from == USEROP) && (type == LD_INSN)) || \ + ((\to == USEROP) && (type == ST_INSN)); \ +9: __BUILD_EVA_INSN(insn##e, reg, addr); \ + .section __ex_table,"a"; \ + PTR 9b, handler; \ + .previous; \ + .else; \ + /* EVA without exception */ \ + insn reg, addr; \ + .endif; \ + .endif + +#undef LOAD #ifdef USE_DOUBLE -#define LOAD ld -#define LOADL ldl -#define LOADR ldr -#define STOREL sdl -#define STORER sdr -#define STORE sd +#define LOADK ld /* No exception */ +#define LOAD(reg, addr, handler) EXC(ld, LD_INSN, reg, addr, handler) +#define LOADBU(reg, addr, handler) EXC(lbu, LD_INSN, reg, addr, handler) +#define LOADL(reg, addr, handler) EXC(ldl, LD_INSN, reg, addr, handler) +#define LOADR(reg, addr, handler) EXC(ldr, LD_INSN, reg, addr, handler) +#define STOREB(reg, addr, handler) EXC(sb, ST_INSN, reg, addr, handler) +#define STOREL(reg, addr, handler) EXC(sdl, ST_INSN, reg, addr, handler) +#define STORER(reg, addr, handler) EXC(sdr, ST_INSN, reg, addr, handler) +#define STORE(reg, addr, handler) EXC(sd, ST_INSN, reg, addr, handler) #define ADD daddu #define SUB dsubu #define SRL dsrl @@ -352,12 +391,15 @@ LEAF(csum_partial) #else -#define LOAD lw -#define LOADL lwl -#define LOADR lwr -#define STOREL swl -#define STORER swr -#define STORE sw +#define LOADK lw /* No exception */ +#define LOAD(reg, addr, handler) EXC(lw, LD_INSN, reg, addr, handler) +#define LOADBU(reg, addr, handler) EXC(lbu, LD_INSN, reg, addr, handler) +#define LOADL(reg, addr, handler) EXC(lwl, LD_INSN, reg, addr, handler) +#define LOADR(reg, addr, handler) EXC(lwr, LD_INSN, reg, addr, handler) +#define STOREB(reg, addr, handler) EXC(sb, ST_INSN, reg, addr, handler) +#define STOREL(reg, addr, handler) EXC(swl, ST_INSN, reg, addr, handler) +#define STORER(reg, addr, handler) EXC(swr, ST_INSN, reg, addr, handler) +#define STORE(reg, addr, handler) EXC(sw, ST_INSN, reg, addr, handler) #define ADD addu #define SUB subu #define SRL srl @@ -396,14 +438,20 @@ LEAF(csum_partial) .set at=v1 #endif -LEAF(__csum_partial_copy_user) + .macro __BUILD_CSUM_PARTIAL_COPY_USER mode, from, to, __nocheck + PTR_ADDU AT, src, len /* See (1) above. */ + /* initialize __nocheck if this the first time we execute this + * macro + */ #ifdef CONFIG_64BIT move errptr, a4 #else lw errptr, 16(sp) #endif -FEXPORT(csum_partial_copy_nocheck) + .if \__nocheck == 1 + FEXPORT(csum_partial_copy_nocheck) + .endif move sum, zero move odd, zero /* @@ -419,48 +467,48 @@ FEXPORT(csum_partial_copy_nocheck) */ sltu t2, len, NBYTES and t1, dst, ADDRMASK - bnez t2, .Lcopy_bytes_checklen + bnez t2, .Lcopy_bytes_checklen\@ and t0, src, ADDRMASK andi odd, dst, 0x1 /* odd buffer? */ - bnez t1, .Ldst_unaligned + bnez t1, .Ldst_unaligned\@ nop - bnez t0, .Lsrc_unaligned_dst_aligned + bnez t0, .Lsrc_unaligned_dst_aligned\@ /* * use delay slot for fall-through * src and dst are aligned; need to compute rem */ -.Lboth_aligned: +.Lboth_aligned\@: SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter - beqz t0, .Lcleanup_both_aligned # len < 8*NBYTES + beqz t0, .Lcleanup_both_aligned\@ # len < 8*NBYTES nop SUB len, 8*NBYTES # subtract here for bgez loop .align 4 1: -EXC( LOAD t0, UNIT(0)(src), .Ll_exc) -EXC( LOAD t1, UNIT(1)(src), .Ll_exc_copy) -EXC( LOAD t2, UNIT(2)(src), .Ll_exc_copy) -EXC( LOAD t3, UNIT(3)(src), .Ll_exc_copy) -EXC( LOAD t4, UNIT(4)(src), .Ll_exc_copy) -EXC( LOAD t5, UNIT(5)(src), .Ll_exc_copy) -EXC( LOAD t6, UNIT(6)(src), .Ll_exc_copy) -EXC( LOAD t7, UNIT(7)(src), .Ll_exc_copy) + LOAD(t0, UNIT(0)(src), .Ll_exc\@) + LOAD(t1, UNIT(1)(src), .Ll_exc_copy\@) + LOAD(t2, UNIT(2)(src), .Ll_exc_copy\@) + LOAD(t3, UNIT(3)(src), .Ll_exc_copy\@) + LOAD(t4, UNIT(4)(src), .Ll_exc_copy\@) + LOAD(t5, UNIT(5)(src), .Ll_exc_copy\@) + LOAD(t6, UNIT(6)(src), .Ll_exc_copy\@) + LOAD(t7, UNIT(7)(src), .Ll_exc_copy\@) SUB len, len, 8*NBYTES ADD src, src, 8*NBYTES -EXC( STORE t0, UNIT(0)(dst), .Ls_exc) + STORE(t0, UNIT(0)(dst), .Ls_exc\@) ADDC(sum, t0) -EXC( STORE t1, UNIT(1)(dst), .Ls_exc) + STORE(t1, UNIT(1)(dst), .Ls_exc\@) ADDC(sum, t1) -EXC( STORE t2, UNIT(2)(dst), .Ls_exc) + STORE(t2, UNIT(2)(dst), .Ls_exc\@) ADDC(sum, t2) -EXC( STORE t3, UNIT(3)(dst), .Ls_exc) + STORE(t3, UNIT(3)(dst), .Ls_exc\@) ADDC(sum, t3) -EXC( STORE t4, UNIT(4)(dst), .Ls_exc) + STORE(t4, UNIT(4)(dst), .Ls_exc\@) ADDC(sum, t4) -EXC( STORE t5, UNIT(5)(dst), .Ls_exc) + STORE(t5, UNIT(5)(dst), .Ls_exc\@) ADDC(sum, t5) -EXC( STORE t6, UNIT(6)(dst), .Ls_exc) + STORE(t6, UNIT(6)(dst), .Ls_exc\@) ADDC(sum, t6) -EXC( STORE t7, UNIT(7)(dst), .Ls_exc) + STORE(t7, UNIT(7)(dst), .Ls_exc\@) ADDC(sum, t7) .set reorder /* DADDI_WAR */ ADD dst, dst, 8*NBYTES @@ -471,44 +519,44 @@ EXC( STORE t7, UNIT(7)(dst), .Ls_exc) /* * len == the number of bytes left to copy < 8*NBYTES */ -.Lcleanup_both_aligned: +.Lcleanup_both_aligned\@: #define rem t7 - beqz len, .Ldone + beqz len, .Ldone\@ sltu t0, len, 4*NBYTES - bnez t0, .Lless_than_4units + bnez t0, .Lless_than_4units\@ and rem, len, (NBYTES-1) # rem = len % NBYTES /* * len >= 4*NBYTES */ -EXC( LOAD t0, UNIT(0)(src), .Ll_exc) -EXC( LOAD t1, UNIT(1)(src), .Ll_exc_copy) -EXC( LOAD t2, UNIT(2)(src), .Ll_exc_copy) -EXC( LOAD t3, UNIT(3)(src), .Ll_exc_copy) + LOAD(t0, UNIT(0)(src), .Ll_exc\@) + LOAD(t1, UNIT(1)(src), .Ll_exc_copy\@) + LOAD(t2, UNIT(2)(src), .Ll_exc_copy\@) + LOAD(t3, UNIT(3)(src), .Ll_exc_copy\@) SUB len, len, 4*NBYTES ADD src, src, 4*NBYTES -EXC( STORE t0, UNIT(0)(dst), .Ls_exc) + STORE(t0, UNIT(0)(dst), .Ls_exc\@) ADDC(sum, t0) -EXC( STORE t1, UNIT(1)(dst), .Ls_exc) + STORE(t1, UNIT(1)(dst), .Ls_exc\@) ADDC(sum, t1) -EXC( STORE t2, UNIT(2)(dst), .Ls_exc) + STORE(t2, UNIT(2)(dst), .Ls_exc\@) ADDC(sum, t2) -EXC( STORE t3, UNIT(3)(dst), .Ls_exc) + STORE(t3, UNIT(3)(dst), .Ls_exc\@) ADDC(sum, t3) .set reorder /* DADDI_WAR */ ADD dst, dst, 4*NBYTES - beqz len, .Ldone + beqz len, .Ldone\@ .set noreorder -.Lless_than_4units: +.Lless_than_4units\@: /* * rem = len % NBYTES */ - beq rem, len, .Lcopy_bytes + beq rem, len, .Lcopy_bytes\@ nop 1: -EXC( LOAD t0, 0(src), .Ll_exc) + LOAD(t0, 0(src), .Ll_exc\@) ADD src, src, NBYTES SUB len, len, NBYTES -EXC( STORE t0, 0(dst), .Ls_exc) + STORE(t0, 0(dst), .Ls_exc\@) ADDC(sum, t0) .set reorder /* DADDI_WAR */ ADD dst, dst, NBYTES @@ -527,20 +575,20 @@ EXC( STORE t0, 0(dst), .Ls_exc) * more instruction-level parallelism. */ #define bits t2 - beqz len, .Ldone + beqz len, .Ldone\@ ADD t1, dst, len # t1 is just past last byte of dst li bits, 8*NBYTES SLL rem, len, 3 # rem = number of bits to keep -EXC( LOAD t0, 0(src), .Ll_exc) + LOAD(t0, 0(src), .Ll_exc\@) SUB bits, bits, rem # bits = number of bits to discard SHIFT_DISCARD t0, t0, bits -EXC( STREST t0, -1(t1), .Ls_exc) + STREST(t0, -1(t1), .Ls_exc\@) SHIFT_DISCARD_REVERT t0, t0, bits .set reorder ADDC(sum, t0) - b .Ldone + b .Ldone\@ .set noreorder -.Ldst_unaligned: +.Ldst_unaligned\@: /* * dst is unaligned * t0 = src & ADDRMASK @@ -551,25 +599,25 @@ EXC( STREST t0, -1(t1), .Ls_exc) * Set match = (src and dst have same alignment) */ #define match rem -EXC( LDFIRST t3, FIRST(0)(src), .Ll_exc) + LDFIRST(t3, FIRST(0)(src), .Ll_exc\@) ADD t2, zero, NBYTES -EXC( LDREST t3, REST(0)(src), .Ll_exc_copy) + LDREST(t3, REST(0)(src), .Ll_exc_copy\@) SUB t2, t2, t1 # t2 = number of bytes copied xor match, t0, t1 -EXC( STFIRST t3, FIRST(0)(dst), .Ls_exc) + STFIRST(t3, FIRST(0)(dst), .Ls_exc\@) SLL t4, t1, 3 # t4 = number of bits to discard SHIFT_DISCARD t3, t3, t4 /* no SHIFT_DISCARD_REVERT to handle odd buffer properly */ ADDC(sum, t3) - beq len, t2, .Ldone + beq len, t2, .Ldone\@ SUB len, len, t2 ADD dst, dst, t2 - beqz match, .Lboth_aligned + beqz match, .Lboth_aligned\@ ADD src, src, t2 -.Lsrc_unaligned_dst_aligned: +.Lsrc_unaligned_dst_aligned\@: SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter - beqz t0, .Lcleanup_src_unaligned + beqz t0, .Lcleanup_src_unaligned\@ and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES 1: /* @@ -578,53 +626,53 @@ EXC( STFIRST t3, FIRST(0)(dst), .Ls_exc) * It's OK to load FIRST(N+1) before REST(N) because the two addresses * are to the same unit (unless src is aligned, but it's not). */ -EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc) -EXC( LDFIRST t1, FIRST(1)(src), .Ll_exc_copy) + LDFIRST(t0, FIRST(0)(src), .Ll_exc\@) + LDFIRST(t1, FIRST(1)(src), .Ll_exc_copy\@) SUB len, len, 4*NBYTES -EXC( LDREST t0, REST(0)(src), .Ll_exc_copy) -EXC( LDREST t1, REST(1)(src), .Ll_exc_copy) -EXC( LDFIRST t2, FIRST(2)(src), .Ll_exc_copy) -EXC( LDFIRST t3, FIRST(3)(src), .Ll_exc_copy) -EXC( LDREST t2, REST(2)(src), .Ll_exc_copy) -EXC( LDREST t3, REST(3)(src), .Ll_exc_copy) + LDREST(t0, REST(0)(src), .Ll_exc_copy\@) + LDREST(t1, REST(1)(src), .Ll_exc_copy\@) + LDFIRST(t2, FIRST(2)(src), .Ll_exc_copy\@) + LDFIRST(t3, FIRST(3)(src), .Ll_exc_copy\@) + LDREST(t2, REST(2)(src), .Ll_exc_copy\@) + LDREST(t3, REST(3)(src), .Ll_exc_copy\@) ADD src, src, 4*NBYTES #ifdef CONFIG_CPU_SB1 nop # improves slotting #endif -EXC( STORE t0, UNIT(0)(dst), .Ls_exc) + STORE(t0, UNIT(0)(dst), .Ls_exc\@) ADDC(sum, t0) -EXC( STORE t1, UNIT(1)(dst), .Ls_exc) + STORE(t1, UNIT(1)(dst), .Ls_exc\@) ADDC(sum, t1) -EXC( STORE t2, UNIT(2)(dst), .Ls_exc) + STORE(t2, UNIT(2)(dst), .Ls_exc\@) ADDC(sum, t2) -EXC( STORE t3, UNIT(3)(dst), .Ls_exc) + STORE(t3, UNIT(3)(dst), .Ls_exc\@) ADDC(sum, t3) .set reorder /* DADDI_WAR */ ADD dst, dst, 4*NBYTES bne len, rem, 1b .set noreorder -.Lcleanup_src_unaligned: - beqz len, .Ldone +.Lcleanup_src_unaligned\@: + beqz len, .Ldone\@ and rem, len, NBYTES-1 # rem = len % NBYTES - beq rem, len, .Lcopy_bytes + beq rem, len, .Lcopy_bytes\@ nop 1: -EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc) -EXC( LDREST t0, REST(0)(src), .Ll_exc_copy) + LDFIRST(t0, FIRST(0)(src), .Ll_exc\@) + LDREST(t0, REST(0)(src), .Ll_exc_copy\@) ADD src, src, NBYTES SUB len, len, NBYTES -EXC( STORE t0, 0(dst), .Ls_exc) + STORE(t0, 0(dst), .Ls_exc\@) ADDC(sum, t0) .set reorder /* DADDI_WAR */ ADD dst, dst, NBYTES bne len, rem, 1b .set noreorder -.Lcopy_bytes_checklen: - beqz len, .Ldone +.Lcopy_bytes_checklen\@: + beqz len, .Ldone\@ nop -.Lcopy_bytes: +.Lcopy_bytes\@: /* 0 < len < NBYTES */ #ifdef CONFIG_CPU_LITTLE_ENDIAN #define SHIFT_START 0 @@ -637,12 +685,12 @@ EXC( STORE t0, 0(dst), .Ls_exc) li t3, SHIFT_START # shift /* use .Ll_exc_copy here to return correct sum on fault */ #define COPY_BYTE(N) \ -EXC( lbu t0, N(src), .Ll_exc_copy); \ + LOADBU(t0, N(src), .Ll_exc_copy\@); \ SUB len, len, 1; \ -EXC( sb t0, N(dst), .Ls_exc); \ + STOREB(t0, N(dst), .Ls_exc\@); \ SLLV t0, t0, t3; \ addu t3, SHIFT_INC; \ - beqz len, .Lcopy_bytes_done; \ + beqz len, .Lcopy_bytes_done\@; \ or t2, t0 COPY_BYTE(0) @@ -653,14 +701,14 @@ EXC( sb t0, N(dst), .Ls_exc); \ COPY_BYTE(4) COPY_BYTE(5) #endif -EXC( lbu t0, NBYTES-2(src), .Ll_exc_copy) + LOADBU(t0, NBYTES-2(src), .Ll_exc_copy\@) SUB len, len, 1 -EXC( sb t0, NBYTES-2(dst), .Ls_exc) + STOREB(t0, NBYTES-2(dst), .Ls_exc\@) SLLV t0, t0, t3 or t2, t0 -.Lcopy_bytes_done: +.Lcopy_bytes_done\@: ADDC(sum, t2) -.Ldone: +.Ldone\@: /* fold checksum */ #ifdef USE_DOUBLE dsll32 v1, sum, 0 @@ -689,7 +737,7 @@ EXC( sb t0, NBYTES-2(dst), .Ls_exc) jr ra .set noreorder -.Ll_exc_copy: +.Ll_exc_copy\@: /* * Copy bytes from src until faulting load address (or until a * lb faults) @@ -700,11 +748,11 @@ EXC( sb t0, NBYTES-2(dst), .Ls_exc) * * Assumes src < THREAD_BUADDR($28) */ - LOAD t0, TI_TASK($28) + LOADK t0, TI_TASK($28) li t2, SHIFT_START - LOAD t0, THREAD_BUADDR(t0) + LOADK t0, THREAD_BUADDR(t0) 1: -EXC( lbu t1, 0(src), .Ll_exc) + LOADBU(t1, 0(src), .Ll_exc\@) ADD src, src, 1 sb t1, 0(dst) # can't fault -- we're copy_from_user SLLV t1, t1, t2 @@ -714,10 +762,10 @@ EXC( lbu t1, 0(src), .Ll_exc) ADD dst, dst, 1 bne src, t0, 1b .set noreorder -.Ll_exc: - LOAD t0, TI_TASK($28) +.Ll_exc\@: + LOADK t0, TI_TASK($28) nop - LOAD t0, THREAD_BUADDR(t0) # t0 is just past last good address + LOADK t0, THREAD_BUADDR(t0) # t0 is just past last good address nop SUB len, AT, t0 # len number of uncopied bytes /* @@ -733,7 +781,7 @@ EXC( lbu t1, 0(src), .Ll_exc) */ .set reorder /* DADDI_WAR */ SUB src, len, 1 - beqz len, .Ldone + beqz len, .Ldone\@ .set noreorder 1: sb zero, 0(dst) ADD dst, dst, 1 @@ -748,13 +796,31 @@ EXC( lbu t1, 0(src), .Ll_exc) SUB src, src, v1 #endif li v1, -EFAULT - b .Ldone + b .Ldone\@ sw v1, (errptr) -.Ls_exc: +.Ls_exc\@: li v0, -1 /* invalid checksum */ li v1, -EFAULT jr ra sw v1, (errptr) .set pop - END(__csum_partial_copy_user) + .endm + +LEAF(__csum_partial_copy_kernel) +#ifndef CONFIG_EVA +FEXPORT(__csum_partial_copy_to_user) +FEXPORT(__csum_partial_copy_from_user) +#endif +__BUILD_CSUM_PARTIAL_COPY_USER LEGACY_MODE USEROP USEROP 1 +END(__csum_partial_copy_kernel) + +#ifdef CONFIG_EVA +LEAF(__csum_partial_copy_to_user) +__BUILD_CSUM_PARTIAL_COPY_USER EVA_MODE KERNELOP USEROP 0 +END(__csum_partial_copy_to_user) + +LEAF(__csum_partial_copy_from_user) +__BUILD_CSUM_PARTIAL_COPY_USER EVA_MODE USEROP KERNELOP 0 +END(__csum_partial_copy_from_user) +#endif diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S index c5c40dad0bbf..c17ef80cf65a 100644 --- a/arch/mips/lib/memcpy.S +++ b/arch/mips/lib/memcpy.S @@ -10,6 +10,7 @@ * Copyright (C) 2002 Broadcom, Inc. * memcpy/copy_user author: Mark Vandevoorde * Copyright (C) 2007 Maciej W. Rozycki + * Copyright (C) 2014 Imagination Technologies Ltd. * * Mnemonic names for arguments to memcpy/__copy_user */ @@ -85,11 +86,51 @@ * they're not protected. */ -#define EXC(inst_reg,addr,handler) \ -9: inst_reg, addr; \ - .section __ex_table,"a"; \ - PTR 9b, handler; \ - .previous +/* Instruction type */ +#define LD_INSN 1 +#define ST_INSN 2 +/* Pretech type */ +#define SRC_PREFETCH 1 +#define DST_PREFETCH 2 +#define LEGACY_MODE 1 +#define EVA_MODE 2 +#define USEROP 1 +#define KERNELOP 2 + +/* + * Wrapper to add an entry in the exception table + * in case the insn causes a memory exception. + * Arguments: + * insn : Load/store instruction + * type : Instruction type + * reg : Register + * addr : Address + * handler : Exception handler + */ + +#define EXC(insn, type, reg, addr, handler) \ + .if \mode == LEGACY_MODE; \ +9: insn reg, addr; \ + .section __ex_table,"a"; \ + PTR 9b, handler; \ + .previous; \ + /* This is assembled in EVA mode */ \ + .else; \ + /* If loading from user or storing to user */ \ + .if ((\from == USEROP) && (type == LD_INSN)) || \ + ((\to == USEROP) && (type == ST_INSN)); \ +9: __BUILD_EVA_INSN(insn##e, reg, addr); \ + .section __ex_table,"a"; \ + PTR 9b, handler; \ + .previous; \ + .else; \ + /* \ + * Still in EVA, but no need for \ + * exception handler or EVA insn \ + */ \ + insn reg, addr; \ + .endif; \ + .endif /* * Only on the 64-bit kernel we can made use of 64-bit registers. @@ -100,12 +141,13 @@ #ifdef USE_DOUBLE -#define LOAD ld -#define LOADL ldl -#define LOADR ldr -#define STOREL sdl -#define STORER sdr -#define STORE sd +#define LOADK ld /* No exception */ +#define LOAD(reg, addr, handler) EXC(ld, LD_INSN, reg, addr, handler) +#define LOADL(reg, addr, handler) EXC(ldl, LD_INSN, reg, addr, handler) +#define LOADR(reg, addr, handler) EXC(ldr, LD_INSN, reg, addr, handler) +#define STOREL(reg, addr, handler) EXC(sdl, ST_INSN, reg, addr, handler) +#define STORER(reg, addr, handler) EXC(sdr, ST_INSN, reg, addr, handler) +#define STORE(reg, addr, handler) EXC(sd, ST_INSN, reg, addr, handler) #define ADD daddu #define SUB dsubu #define SRL dsrl @@ -136,12 +178,13 @@ #else -#define LOAD lw -#define LOADL lwl -#define LOADR lwr -#define STOREL swl -#define STORER swr -#define STORE sw +#define LOADK lw /* No exception */ +#define LOAD(reg, addr, handler) EXC(lw, LD_INSN, reg, addr, handler) +#define LOADL(reg, addr, handler) EXC(lwl, LD_INSN, reg, addr, handler) +#define LOADR(reg, addr, handler) EXC(lwr, LD_INSN, reg, addr, handler) +#define STOREL(reg, addr, handler) EXC(swl, ST_INSN, reg, addr, handler) +#define STORER(reg, addr, handler) EXC(swr, ST_INSN, reg, addr, handler) +#define STORE(reg, addr, handler) EXC(sw, ST_INSN, reg, addr, handler) #define ADD addu #define SUB subu #define SRL srl @@ -154,6 +197,33 @@ #endif /* USE_DOUBLE */ +#define LOADB(reg, addr, handler) EXC(lb, LD_INSN, reg, addr, handler) +#define STOREB(reg, addr, handler) EXC(sb, ST_INSN, reg, addr, handler) + +#define _PREF(hint, addr, type) \ + .if \mode == LEGACY_MODE; \ + PREF(hint, addr); \ + .else; \ + .if ((\from == USEROP) && (type == SRC_PREFETCH)) || \ + ((\to == USEROP) && (type == DST_PREFETCH)); \ + /* \ + * PREFE has only 9 bits for the offset \ + * compared to PREF which has 16, so it may \ + * need to use the $at register but this \ + * register should remain intact because it's \ + * used later on. Therefore use $v1. \ + */ \ + .set at=v1; \ + PREFE(hint, addr); \ + .set noat; \ + .else; \ + PREF(hint, addr); \ + .endif; \ + .endif + +#define PREFS(hint, addr) _PREF(hint, addr, SRC_PREFETCH) +#define PREFD(hint, addr) _PREF(hint, addr, DST_PREFETCH) + #ifdef CONFIG_CPU_LITTLE_ENDIAN #define LDFIRST LOADR #define LDREST LOADL @@ -182,27 +252,23 @@ .set at=v1 #endif -/* - * t6 is used as a flag to note inatomic mode. - */ -LEAF(__copy_user_inatomic) - b __copy_user_common - li t6, 1 - END(__copy_user_inatomic) - -/* - * A combined memcpy/__copy_user - * __copy_user sets len to 0 for success; else to an upper bound of - * the number of uncopied bytes. - * memcpy sets v0 to dst. - */ .align 5 -LEAF(memcpy) /* a0=dst a1=src a2=len */ - move v0, dst /* return value */ -.L__memcpy: -FEXPORT(__copy_user) - li t6, 0 /* not inatomic */ -__copy_user_common: + + /* + * Macro to build the __copy_user common code + * Arguements: + * mode : LEGACY_MODE or EVA_MODE + * from : Source operand. USEROP or KERNELOP + * to : Destination operand. USEROP or KERNELOP + */ + .macro __BUILD_COPY_USER mode, from, to + + /* initialize __memcpy if this the first time we execute this macro */ + .ifnotdef __memcpy + .set __memcpy, 1 + .hidden __memcpy /* make sure it does not leak */ + .endif + /* * Note: dst & src may be unaligned, len may be 0 * Temps @@ -217,94 +283,94 @@ __copy_user_common: * * If len < NBYTES use byte operations. */ - PREF( 0, 0(src) ) - PREF( 1, 0(dst) ) + PREFS( 0, 0(src) ) + PREFD( 1, 0(dst) ) sltu t2, len, NBYTES and t1, dst, ADDRMASK - PREF( 0, 1*32(src) ) - PREF( 1, 1*32(dst) ) - bnez t2, .Lcopy_bytes_checklen + PREFS( 0, 1*32(src) ) + PREFD( 1, 1*32(dst) ) + bnez t2, .Lcopy_bytes_checklen\@ and t0, src, ADDRMASK - PREF( 0, 2*32(src) ) - PREF( 1, 2*32(dst) ) - bnez t1, .Ldst_unaligned + PREFS( 0, 2*32(src) ) + PREFD( 1, 2*32(dst) ) + bnez t1, .Ldst_unaligned\@ nop - bnez t0, .Lsrc_unaligned_dst_aligned + bnez t0, .Lsrc_unaligned_dst_aligned\@ /* * use delay slot for fall-through * src and dst are aligned; need to compute rem */ -.Lboth_aligned: +.Lboth_aligned\@: SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter - beqz t0, .Lcleanup_both_aligned # len < 8*NBYTES + beqz t0, .Lcleanup_both_aligned\@ # len < 8*NBYTES and rem, len, (8*NBYTES-1) # rem = len % (8*NBYTES) - PREF( 0, 3*32(src) ) - PREF( 1, 3*32(dst) ) + PREFS( 0, 3*32(src) ) + PREFD( 1, 3*32(dst) ) .align 4 1: R10KCBARRIER(0(ra)) -EXC( LOAD t0, UNIT(0)(src), .Ll_exc) -EXC( LOAD t1, UNIT(1)(src), .Ll_exc_copy) -EXC( LOAD t2, UNIT(2)(src), .Ll_exc_copy) -EXC( LOAD t3, UNIT(3)(src), .Ll_exc_copy) + LOAD(t0, UNIT(0)(src), .Ll_exc\@) + LOAD(t1, UNIT(1)(src), .Ll_exc_copy\@) + LOAD(t2, UNIT(2)(src), .Ll_exc_copy\@) + LOAD(t3, UNIT(3)(src), .Ll_exc_copy\@) SUB len, len, 8*NBYTES -EXC( LOAD t4, UNIT(4)(src), .Ll_exc_copy) -EXC( LOAD t7, UNIT(5)(src), .Ll_exc_copy) -EXC( STORE t0, UNIT(0)(dst), .Ls_exc_p8u) -EXC( STORE t1, UNIT(1)(dst), .Ls_exc_p7u) -EXC( LOAD t0, UNIT(6)(src), .Ll_exc_copy) -EXC( LOAD t1, UNIT(7)(src), .Ll_exc_copy) + LOAD(t4, UNIT(4)(src), .Ll_exc_copy\@) + LOAD(t7, UNIT(5)(src), .Ll_exc_copy\@) + STORE(t0, UNIT(0)(dst), .Ls_exc_p8u\@) + STORE(t1, UNIT(1)(dst), .Ls_exc_p7u\@) + LOAD(t0, UNIT(6)(src), .Ll_exc_copy\@) + LOAD(t1, UNIT(7)(src), .Ll_exc_copy\@) ADD src, src, 8*NBYTES ADD dst, dst, 8*NBYTES -EXC( STORE t2, UNIT(-6)(dst), .Ls_exc_p6u) -EXC( STORE t3, UNIT(-5)(dst), .Ls_exc_p5u) -EXC( STORE t4, UNIT(-4)(dst), .Ls_exc_p4u) -EXC( STORE t7, UNIT(-3)(dst), .Ls_exc_p3u) -EXC( STORE t0, UNIT(-2)(dst), .Ls_exc_p2u) -EXC( STORE t1, UNIT(-1)(dst), .Ls_exc_p1u) - PREF( 0, 8*32(src) ) - PREF( 1, 8*32(dst) ) + STORE(t2, UNIT(-6)(dst), .Ls_exc_p6u\@) + STORE(t3, UNIT(-5)(dst), .Ls_exc_p5u\@) + STORE(t4, UNIT(-4)(dst), .Ls_exc_p4u\@) + STORE(t7, UNIT(-3)(dst), .Ls_exc_p3u\@) + STORE(t0, UNIT(-2)(dst), .Ls_exc_p2u\@) + STORE(t1, UNIT(-1)(dst), .Ls_exc_p1u\@) + PREFS( 0, 8*32(src) ) + PREFD( 1, 8*32(dst) ) bne len, rem, 1b nop /* * len == rem == the number of bytes left to copy < 8*NBYTES */ -.Lcleanup_both_aligned: - beqz len, .Ldone +.Lcleanup_both_aligned\@: + beqz len, .Ldone\@ sltu t0, len, 4*NBYTES - bnez t0, .Lless_than_4units + bnez t0, .Lless_than_4units\@ and rem, len, (NBYTES-1) # rem = len % NBYTES /* * len >= 4*NBYTES */ -EXC( LOAD t0, UNIT(0)(src), .Ll_exc) -EXC( LOAD t1, UNIT(1)(src), .Ll_exc_copy) -EXC( LOAD t2, UNIT(2)(src), .Ll_exc_copy) -EXC( LOAD t3, UNIT(3)(src), .Ll_exc_copy) + LOAD( t0, UNIT(0)(src), .Ll_exc\@) + LOAD( t1, UNIT(1)(src), .Ll_exc_copy\@) + LOAD( t2, UNIT(2)(src), .Ll_exc_copy\@) + LOAD( t3, UNIT(3)(src), .Ll_exc_copy\@) SUB len, len, 4*NBYTES ADD src, src, 4*NBYTES R10KCBARRIER(0(ra)) -EXC( STORE t0, UNIT(0)(dst), .Ls_exc_p4u) -EXC( STORE t1, UNIT(1)(dst), .Ls_exc_p3u) -EXC( STORE t2, UNIT(2)(dst), .Ls_exc_p2u) -EXC( STORE t3, UNIT(3)(dst), .Ls_exc_p1u) + STORE(t0, UNIT(0)(dst), .Ls_exc_p4u\@) + STORE(t1, UNIT(1)(dst), .Ls_exc_p3u\@) + STORE(t2, UNIT(2)(dst), .Ls_exc_p2u\@) + STORE(t3, UNIT(3)(dst), .Ls_exc_p1u\@) .set reorder /* DADDI_WAR */ ADD dst, dst, 4*NBYTES - beqz len, .Ldone + beqz len, .Ldone\@ .set noreorder -.Lless_than_4units: +.Lless_than_4units\@: /* * rem = len % NBYTES */ - beq rem, len, .Lcopy_bytes + beq rem, len, .Lcopy_bytes\@ nop 1: R10KCBARRIER(0(ra)) -EXC( LOAD t0, 0(src), .Ll_exc) + LOAD(t0, 0(src), .Ll_exc\@) ADD src, src, NBYTES SUB len, len, NBYTES -EXC( STORE t0, 0(dst), .Ls_exc_p1u) + STORE(t0, 0(dst), .Ls_exc_p1u\@) .set reorder /* DADDI_WAR */ ADD dst, dst, NBYTES bne rem, len, 1b @@ -322,17 +388,17 @@ EXC( STORE t0, 0(dst), .Ls_exc_p1u) * more instruction-level parallelism. */ #define bits t2 - beqz len, .Ldone + beqz len, .Ldone\@ ADD t1, dst, len # t1 is just past last byte of dst li bits, 8*NBYTES SLL rem, len, 3 # rem = number of bits to keep -EXC( LOAD t0, 0(src), .Ll_exc) + LOAD(t0, 0(src), .Ll_exc\@) SUB bits, bits, rem # bits = number of bits to discard SHIFT_DISCARD t0, t0, bits -EXC( STREST t0, -1(t1), .Ls_exc) + STREST(t0, -1(t1), .Ls_exc\@) jr ra move len, zero -.Ldst_unaligned: +.Ldst_unaligned\@: /* * dst is unaligned * t0 = src & ADDRMASK @@ -343,25 +409,25 @@ EXC( STREST t0, -1(t1), .Ls_exc) * Set match = (src and dst have same alignment) */ #define match rem -EXC( LDFIRST t3, FIRST(0)(src), .Ll_exc) + LDFIRST(t3, FIRST(0)(src), .Ll_exc\@) ADD t2, zero, NBYTES -EXC( LDREST t3, REST(0)(src), .Ll_exc_copy) + LDREST(t3, REST(0)(src), .Ll_exc_copy\@) SUB t2, t2, t1 # t2 = number of bytes copied xor match, t0, t1 R10KCBARRIER(0(ra)) -EXC( STFIRST t3, FIRST(0)(dst), .Ls_exc) - beq len, t2, .Ldone + STFIRST(t3, FIRST(0)(dst), .Ls_exc\@) + beq len, t2, .Ldone\@ SUB len, len, t2 ADD dst, dst, t2 - beqz match, .Lboth_aligned + beqz match, .Lboth_aligned\@ ADD src, src, t2 -.Lsrc_unaligned_dst_aligned: +.Lsrc_unaligned_dst_aligned\@: SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter - PREF( 0, 3*32(src) ) - beqz t0, .Lcleanup_src_unaligned + PREFS( 0, 3*32(src) ) + beqz t0, .Lcleanup_src_unaligned\@ and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES - PREF( 1, 3*32(dst) ) + PREFD( 1, 3*32(dst) ) 1: /* * Avoid consecutive LD*'s to the same register since some mips @@ -370,58 +436,58 @@ EXC( STFIRST t3, FIRST(0)(dst), .Ls_exc) * are to the same unit (unless src is aligned, but it's not). */ R10KCBARRIER(0(ra)) -EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc) -EXC( LDFIRST t1, FIRST(1)(src), .Ll_exc_copy) + LDFIRST(t0, FIRST(0)(src), .Ll_exc\@) + LDFIRST(t1, FIRST(1)(src), .Ll_exc_copy\@) SUB len, len, 4*NBYTES -EXC( LDREST t0, REST(0)(src), .Ll_exc_copy) -EXC( LDREST t1, REST(1)(src), .Ll_exc_copy) -EXC( LDFIRST t2, FIRST(2)(src), .Ll_exc_copy) -EXC( LDFIRST t3, FIRST(3)(src), .Ll_exc_copy) -EXC( LDREST t2, REST(2)(src), .Ll_exc_copy) -EXC( LDREST t3, REST(3)(src), .Ll_exc_copy) - PREF( 0, 9*32(src) ) # 0 is PREF_LOAD (not streamed) + LDREST(t0, REST(0)(src), .Ll_exc_copy\@) + LDREST(t1, REST(1)(src), .Ll_exc_copy\@) + LDFIRST(t2, FIRST(2)(src), .Ll_exc_copy\@) + LDFIRST(t3, FIRST(3)(src), .Ll_exc_copy\@) + LDREST(t2, REST(2)(src), .Ll_exc_copy\@) + LDREST(t3, REST(3)(src), .Ll_exc_copy\@) + PREFS( 0, 9*32(src) ) # 0 is PREF_LOAD (not streamed) ADD src, src, 4*NBYTES #ifdef CONFIG_CPU_SB1 nop # improves slotting #endif -EXC( STORE t0, UNIT(0)(dst), .Ls_exc_p4u) -EXC( STORE t1, UNIT(1)(dst), .Ls_exc_p3u) -EXC( STORE t2, UNIT(2)(dst), .Ls_exc_p2u) -EXC( STORE t3, UNIT(3)(dst), .Ls_exc_p1u) - PREF( 1, 9*32(dst) ) # 1 is PREF_STORE (not streamed) + STORE(t0, UNIT(0)(dst), .Ls_exc_p4u\@) + STORE(t1, UNIT(1)(dst), .Ls_exc_p3u\@) + STORE(t2, UNIT(2)(dst), .Ls_exc_p2u\@) + STORE(t3, UNIT(3)(dst), .Ls_exc_p1u\@) + PREFD( 1, 9*32(dst) ) # 1 is PREF_STORE (not streamed) .set reorder /* DADDI_WAR */ ADD dst, dst, 4*NBYTES bne len, rem, 1b .set noreorder -.Lcleanup_src_unaligned: - beqz len, .Ldone +.Lcleanup_src_unaligned\@: + beqz len, .Ldone\@ and rem, len, NBYTES-1 # rem = len % NBYTES - beq rem, len, .Lcopy_bytes + beq rem, len, .Lcopy_bytes\@ nop 1: R10KCBARRIER(0(ra)) -EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc) -EXC( LDREST t0, REST(0)(src), .Ll_exc_copy) + LDFIRST(t0, FIRST(0)(src), .Ll_exc\@) + LDREST(t0, REST(0)(src), .Ll_exc_copy\@) ADD src, src, NBYTES SUB len, len, NBYTES -EXC( STORE t0, 0(dst), .Ls_exc_p1u) + STORE(t0, 0(dst), .Ls_exc_p1u\@) .set reorder /* DADDI_WAR */ ADD dst, dst, NBYTES bne len, rem, 1b .set noreorder -.Lcopy_bytes_checklen: - beqz len, .Ldone +.Lcopy_bytes_checklen\@: + beqz len, .Ldone\@ nop -.Lcopy_bytes: +.Lcopy_bytes\@: /* 0 < len < NBYTES */ R10KCBARRIER(0(ra)) #define COPY_BYTE(N) \ -EXC( lb t0, N(src), .Ll_exc); \ + LOADB(t0, N(src), .Ll_exc\@); \ SUB len, len, 1; \ - beqz len, .Ldone; \ -EXC( sb t0, N(dst), .Ls_exc_p1) + beqz len, .Ldone\@; \ + STOREB(t0, N(dst), .Ls_exc_p1\@) COPY_BYTE(0) COPY_BYTE(1) @@ -431,16 +497,19 @@ EXC( sb t0, N(dst), .Ls_exc_p1) COPY_BYTE(4) COPY_BYTE(5) #endif -EXC( lb t0, NBYTES-2(src), .Ll_exc) + LOADB(t0, NBYTES-2(src), .Ll_exc\@) SUB len, len, 1 jr ra -EXC( sb t0, NBYTES-2(dst), .Ls_exc_p1) -.Ldone: + STOREB(t0, NBYTES-2(dst), .Ls_exc_p1\@) +.Ldone\@: jr ra - nop + .if __memcpy == 1 END(memcpy) + .set __memcpy, 0 + .hidden __memcpy + .endif -.Ll_exc_copy: +.Ll_exc_copy\@: /* * Copy bytes from src until faulting load address (or until a * lb faults) @@ -451,24 +520,24 @@ EXC( sb t0, NBYTES-2(dst), .Ls_exc_p1) * * Assumes src < THREAD_BUADDR($28) */ - LOAD t0, TI_TASK($28) + LOADK t0, TI_TASK($28) nop - LOAD t0, THREAD_BUADDR(t0) + LOADK t0, THREAD_BUADDR(t0) 1: -EXC( lb t1, 0(src), .Ll_exc) + LOADB(t1, 0(src), .Ll_exc\@) ADD src, src, 1 sb t1, 0(dst) # can't fault -- we're copy_from_user .set reorder /* DADDI_WAR */ ADD dst, dst, 1 bne src, t0, 1b .set noreorder -.Ll_exc: - LOAD t0, TI_TASK($28) +.Ll_exc\@: + LOADK t0, TI_TASK($28) nop - LOAD t0, THREAD_BUADDR(t0) # t0 is just past last good address + LOADK t0, THREAD_BUADDR(t0) # t0 is just past last good address nop SUB len, AT, t0 # len number of uncopied bytes - bnez t6, .Ldone /* Skip the zeroing part if inatomic */ + bnez t6, .Ldone\@ /* Skip the zeroing part if inatomic */ /* * Here's where we rely on src and dst being incremented in tandem, * See (3) above. @@ -482,7 +551,7 @@ EXC( lb t1, 0(src), .Ll_exc) */ .set reorder /* DADDI_WAR */ SUB src, len, 1 - beqz len, .Ldone + beqz len, .Ldone\@ .set noreorder 1: sb zero, 0(dst) ADD dst, dst, 1 @@ -503,7 +572,7 @@ EXC( lb t1, 0(src), .Ll_exc) #define SEXC(n) \ .set reorder; /* DADDI_WAR */ \ -.Ls_exc_p ## n ## u: \ +.Ls_exc_p ## n ## u\@: \ ADD len, len, n*NBYTES; \ jr ra; \ .set noreorder @@ -517,14 +586,15 @@ SEXC(3) SEXC(2) SEXC(1) -.Ls_exc_p1: +.Ls_exc_p1\@: .set reorder /* DADDI_WAR */ ADD len, len, 1 jr ra .set noreorder -.Ls_exc: +.Ls_exc\@: jr ra nop + .endm .align 5 LEAF(memmove) @@ -575,3 +645,71 @@ LEAF(__rmemcpy) /* a0=dst a1=src a2=len */ jr ra move a2, zero END(__rmemcpy) + +/* + * t6 is used as a flag to note inatomic mode. + */ +LEAF(__copy_user_inatomic) + b __copy_user_common + li t6, 1 + END(__copy_user_inatomic) + +/* + * A combined memcpy/__copy_user + * __copy_user sets len to 0 for success; else to an upper bound of + * the number of uncopied bytes. + * memcpy sets v0 to dst. + */ + .align 5 +LEAF(memcpy) /* a0=dst a1=src a2=len */ + move v0, dst /* return value */ +.L__memcpy: +FEXPORT(__copy_user) + li t6, 0 /* not inatomic */ +__copy_user_common: + /* Legacy Mode, user <-> user */ + __BUILD_COPY_USER LEGACY_MODE USEROP USEROP + +#ifdef CONFIG_EVA + +/* + * For EVA we need distinct symbols for reading and writing to user space. + * This is because we need to use specific EVA instructions to perform the + * virtual <-> physical translation when a virtual address is actually in user + * space + */ + +LEAF(__copy_user_inatomic_eva) + b __copy_from_user_common + li t6, 1 + END(__copy_user_inatomic_eva) + +/* + * __copy_from_user (EVA) + */ + +LEAF(__copy_from_user_eva) + li t6, 0 /* not inatomic */ +__copy_from_user_common: + __BUILD_COPY_USER EVA_MODE USEROP KERNELOP +END(__copy_from_user_eva) + + + +/* + * __copy_to_user (EVA) + */ + +LEAF(__copy_to_user_eva) +__BUILD_COPY_USER EVA_MODE KERNELOP USEROP +END(__copy_to_user_eva) + +/* + * __copy_in_user (EVA) + */ + +LEAF(__copy_in_user_eva) +__BUILD_COPY_USER EVA_MODE USEROP USEROP +END(__copy_in_user_eva) + +#endif diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S index 0580194e7402..7b0e5462ca51 100644 --- a/arch/mips/lib/memset.S +++ b/arch/mips/lib/memset.S @@ -34,13 +34,27 @@ #define FILLPTRG t0 #endif +#define LEGACY_MODE 1 +#define EVA_MODE 2 + +/* + * No need to protect it with EVA #ifdefery. The generated block of code + * will never be assembled if EVA is not enabled. + */ +#define __EVAFY(insn, reg, addr) __BUILD_EVA_INSN(insn##e, reg, addr) +#define ___BUILD_EVA_INSN(insn, reg, addr) __EVAFY(insn, reg, addr) + #define EX(insn,reg,addr,handler) \ -9: insn reg, addr; \ + .if \mode == LEGACY_MODE; \ +9: insn reg, addr; \ + .else; \ +9: ___BUILD_EVA_INSN(insn, reg, addr); \ + .endif; \ .section __ex_table,"a"; \ PTR 9b, handler; \ .previous - .macro f_fill64 dst, offset, val, fixup + .macro f_fill64 dst, offset, val, fixup, mode EX(LONG_S, \val, (\offset + 0 * STORSIZE)(\dst), \fixup) EX(LONG_S, \val, (\offset + 1 * STORSIZE)(\dst), \fixup) EX(LONG_S, \val, (\offset + 2 * STORSIZE)(\dst), \fixup) @@ -63,34 +77,24 @@ #endif .endm -/* - * memset(void *s, int c, size_t n) - * - * a0: start of area to clear - * a1: char to fill with - * a2: size of area to clear - */ .set noreorder .align 5 -LEAF(memset) - beqz a1, 1f - move v0, a0 /* result */ - andi a1, 0xff /* spread fillword */ - LONG_SLL t1, a1, 8 - or a1, t1 - LONG_SLL t1, a1, 16 -#if LONGSIZE == 8 - or a1, t1 - LONG_SLL t1, a1, 32 -#endif - or a1, t1 -1: + /* + * Macro to generate the __bzero{,_user} symbol + * Arguments: + * mode: LEGACY_MODE or EVA_MODE + */ + .macro __BUILD_BZERO mode + /* Initialize __memset if this is the first time we call this macro */ + .ifnotdef __memset + .set __memset, 1 + .hidden __memset /* Make sure it does not leak */ + .endif -FEXPORT(__bzero) sltiu t0, a2, STORSIZE /* very small region? */ - bnez t0, .Lsmall_memset - andi t0, a0, STORMASK /* aligned? */ + bnez t0, .Lsmall_memset\@ + andi t0, a0, STORMASK /* aligned? */ #ifdef CONFIG_CPU_MICROMIPS move t8, a1 /* used by 'swp' instruction */ @@ -98,39 +102,39 @@ FEXPORT(__bzero) #endif #ifndef CONFIG_CPU_DADDI_WORKAROUNDS beqz t0, 1f - PTR_SUBU t0, STORSIZE /* alignment in bytes */ + PTR_SUBU t0, STORSIZE /* alignment in bytes */ #else .set noat li AT, STORSIZE beqz t0, 1f - PTR_SUBU t0, AT /* alignment in bytes */ + PTR_SUBU t0, AT /* alignment in bytes */ .set at #endif R10KCBARRIER(0(ra)) #ifdef __MIPSEB__ - EX(LONG_S_L, a1, (a0), .Lfirst_fixup) /* make word/dword aligned */ + EX(LONG_S_L, a1, (a0), .Lfirst_fixup\@) /* make word/dword aligned */ #endif #ifdef __MIPSEL__ - EX(LONG_S_R, a1, (a0), .Lfirst_fixup) /* make word/dword aligned */ + EX(LONG_S_R, a1, (a0), .Lfirst_fixup\@) /* make word/dword aligned */ #endif PTR_SUBU a0, t0 /* long align ptr */ PTR_ADDU a2, t0 /* correct size */ 1: ori t1, a2, 0x3f /* # of full blocks */ xori t1, 0x3f - beqz t1, .Lmemset_partial /* no block to fill */ - andi t0, a2, 0x40-STORSIZE + beqz t1, .Lmemset_partial\@ /* no block to fill */ + andi t0, a2, 0x40-STORSIZE PTR_ADDU t1, a0 /* end address */ .set reorder 1: PTR_ADDIU a0, 64 R10KCBARRIER(0(ra)) - f_fill64 a0, -64, FILL64RG, .Lfwd_fixup + f_fill64 a0, -64, FILL64RG, .Lfwd_fixup\@, \mode bne t1, a0, 1b .set noreorder -.Lmemset_partial: +.Lmemset_partial\@: R10KCBARRIER(0(ra)) PTR_LA t1, 2f /* where to start */ #ifdef CONFIG_CPU_MICROMIPS @@ -145,60 +149,100 @@ FEXPORT(__bzero) .set at #endif jr t1 - PTR_ADDU a0, t0 /* dest ptr */ + PTR_ADDU a0, t0 /* dest ptr */ .set push .set noreorder .set nomacro - f_fill64 a0, -64, FILL64RG, .Lpartial_fixup /* ... but first do longs ... */ + /* ... but first do longs ... */ + f_fill64 a0, -64, FILL64RG, .Lpartial_fixup\@, \mode 2: .set pop andi a2, STORMASK /* At most one long to go */ beqz a2, 1f - PTR_ADDU a0, a2 /* What's left */ + PTR_ADDU a0, a2 /* What's left */ R10KCBARRIER(0(ra)) #ifdef __MIPSEB__ - EX(LONG_S_R, a1, -1(a0), .Llast_fixup) + EX(LONG_S_R, a1, -1(a0), .Llast_fixup\@) #endif #ifdef __MIPSEL__ - EX(LONG_S_L, a1, -1(a0), .Llast_fixup) + EX(LONG_S_L, a1, -1(a0), .Llast_fixup\@) #endif 1: jr ra - move a2, zero + move a2, zero -.Lsmall_memset: +.Lsmall_memset\@: beqz a2, 2f - PTR_ADDU t1, a0, a2 + PTR_ADDU t1, a0, a2 1: PTR_ADDIU a0, 1 /* fill bytewise */ R10KCBARRIER(0(ra)) bne t1, a0, 1b - sb a1, -1(a0) + sb a1, -1(a0) 2: jr ra /* done */ - move a2, zero + move a2, zero + .if __memset == 1 END(memset) + .set __memset, 0 + .hidden __memset + .endif -.Lfirst_fixup: +.Lfirst_fixup\@: jr ra - nop + nop -.Lfwd_fixup: +.Lfwd_fixup\@: PTR_L t0, TI_TASK($28) andi a2, 0x3f LONG_L t0, THREAD_BUADDR(t0) LONG_ADDU a2, t1 jr ra - LONG_SUBU a2, t0 + LONG_SUBU a2, t0 -.Lpartial_fixup: +.Lpartial_fixup\@: PTR_L t0, TI_TASK($28) andi a2, STORMASK LONG_L t0, THREAD_BUADDR(t0) LONG_ADDU a2, t1 jr ra - LONG_SUBU a2, t0 + LONG_SUBU a2, t0 -.Llast_fixup: +.Llast_fixup\@: jr ra - andi v1, a2, STORMASK + andi v1, a2, STORMASK + + .endm + +/* + * memset(void *s, int c, size_t n) + * + * a0: start of area to clear + * a1: char to fill with + * a2: size of area to clear + */ + +LEAF(memset) + beqz a1, 1f + move v0, a0 /* result */ + + andi a1, 0xff /* spread fillword */ + LONG_SLL t1, a1, 8 + or a1, t1 + LONG_SLL t1, a1, 16 +#if LONGSIZE == 8 + or a1, t1 + LONG_SLL t1, a1, 32 +#endif + or a1, t1 +1: +#ifndef CONFIG_EVA +FEXPORT(__bzero) +#endif + __BUILD_BZERO LEGACY_MODE + +#ifdef CONFIG_EVA +LEAF(__bzero) + __BUILD_BZERO EVA_MODE +END(__bzero) +#endif diff --git a/arch/mips/lib/strlen_user.S b/arch/mips/lib/strlen_user.S index e362dcdc69d1..bef65c98df59 100644 --- a/arch/mips/lib/strlen_user.S +++ b/arch/mips/lib/strlen_user.S @@ -22,19 +22,43 @@ * * Return 0 for error */ -LEAF(__strlen_user_asm) + .macro __BUILD_STRLEN_ASM func +LEAF(__strlen_\func\()_asm) LONG_L v0, TI_ADDR_LIMIT($28) # pointer ok? and v0, a0 - bnez v0, .Lfault + bnez v0, .Lfault\@ -FEXPORT(__strlen_user_nocheck_asm) +FEXPORT(__strlen_\func\()_nocheck_asm) move v0, a0 -1: EX(lbu, v1, (v0), .Lfault) +.ifeqs "\func", "kernel" +1: EX(lbu, v1, (v0), .Lfault\@) +.else +1: EX(lbue, v1, (v0), .Lfault\@) +.endif PTR_ADDIU v0, 1 bnez v1, 1b PTR_SUBU v0, a0 jr ra - END(__strlen_user_asm) + END(__strlen_\func\()_asm) -.Lfault: move v0, zero +.Lfault\@: move v0, zero jr ra + .endm + +#ifndef CONFIG_EVA + /* Set aliases */ + .global __strlen_user_asm + .global __strlen_user_nocheck_asm + .set __strlen_user_asm, __strlen_kernel_asm + .set __strlen_user_nocheck_asm, __strlen_kernel_nocheck_asm +#endif + +__BUILD_STRLEN_ASM kernel + +#ifdef CONFIG_EVA + + .set push + .set eva +__BUILD_STRLEN_ASM user + .set pop +#endif diff --git a/arch/mips/lib/strncpy_user.S b/arch/mips/lib/strncpy_user.S index 92870b6b53ea..d3301cd1e9a5 100644 --- a/arch/mips/lib/strncpy_user.S +++ b/arch/mips/lib/strncpy_user.S @@ -28,16 +28,21 @@ * it happens at most some bytes of the exceptions handlers will be copied. */ -LEAF(__strncpy_from_user_asm) + .macro __BUILD_STRNCPY_ASM func +LEAF(__strncpy_from_\func\()_asm) LONG_L v0, TI_ADDR_LIMIT($28) # pointer ok? and v0, a1 - bnez v0, .Lfault + bnez v0, .Lfault\@ -FEXPORT(__strncpy_from_user_nocheck_asm) +FEXPORT(__strncpy_from_\func\()_nocheck_asm) .set noreorder move t0, zero move v1, a1 -1: EX(lbu, v0, (v1), .Lfault) +.ifeqs "\func","kernel" +1: EX(lbu, v0, (v1), .Lfault\@) +.else +1: EX(lbue, v0, (v1), .Lfault\@) +.endif PTR_ADDIU v1, 1 R10KCBARRIER(0(ra)) beqz v0, 2f @@ -47,15 +52,34 @@ FEXPORT(__strncpy_from_user_nocheck_asm) PTR_ADDIU a0, 1 2: PTR_ADDU v0, a1, t0 xor v0, a1 - bltz v0, .Lfault + bltz v0, .Lfault\@ nop jr ra # return n move v0, t0 - END(__strncpy_from_user_asm) + END(__strncpy_from_\func\()_asm) -.Lfault: jr ra +.Lfault\@: jr ra li v0, -EFAULT .section __ex_table,"a" - PTR 1b, .Lfault + PTR 1b, .Lfault\@ .previous + + .endm + +#ifndef CONFIG_EVA + /* Set aliases */ + .global __strncpy_from_user_asm + .global __strncpy_from_user_nocheck_asm + .set __strncpy_from_user_asm, __strncpy_from_kernel_asm + .set __strncpy_from_user_nocheck_asm, __strncpy_from_kernel_nocheck_asm +#endif + +__BUILD_STRNCPY_ASM kernel + +#ifdef CONFIG_EVA + .set push + .set eva +__BUILD_STRNCPY_ASM user + .set pop +#endif diff --git a/arch/mips/lib/strnlen_user.S b/arch/mips/lib/strnlen_user.S index fcacea5e61f1..f3af6995e2a6 100644 --- a/arch/mips/lib/strnlen_user.S +++ b/arch/mips/lib/strnlen_user.S @@ -25,22 +25,46 @@ * bytes. There's nothing secret there. On 64-bit accessing beyond * the maximum is a tad hairier ... */ -LEAF(__strnlen_user_asm) + .macro __BUILD_STRNLEN_ASM func +LEAF(__strnlen_\func\()_asm) LONG_L v0, TI_ADDR_LIMIT($28) # pointer ok? and v0, a0 - bnez v0, .Lfault + bnez v0, .Lfault\@ -FEXPORT(__strnlen_user_nocheck_asm) +FEXPORT(__strnlen_\func\()_nocheck_asm) move v0, a0 PTR_ADDU a1, a0 # stop pointer 1: beq v0, a1, 1f # limit reached? - EX(lb, t0, (v0), .Lfault) +.ifeqs "\func", "kernel" + EX(lb, t0, (v0), .Lfault\@) +.else + EX(lbe, t0, (v0), .Lfault\@) +.endif PTR_ADDIU v0, 1 bnez t0, 1b 1: PTR_SUBU v0, a0 jr ra - END(__strnlen_user_asm) + END(__strnlen_\func\()_asm) -.Lfault: +.Lfault\@: move v0, zero jr ra + .endm + +#ifndef CONFIG_EVA + /* Set aliases */ + .global __strnlen_user_asm + .global __strnlen_user_nocheck_asm + .set __strnlen_user_asm, __strnlen_kernel_asm + .set __strnlen_user_nocheck_asm, __strnlen_kernel_nocheck_asm +#endif + +__BUILD_STRNLEN_ASM kernel + +#ifdef CONFIG_EVA + + .set push + .set eva +__BUILD_STRNLEN_ASM user + .set pop +#endif |
