diff options
Diffstat (limited to 'arch/blackfin/mach-bf548')
| -rw-r--r-- | arch/blackfin/mach-bf548/boards/cm_bf548.c | 48 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf548/boards/ezkit.c | 32 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf548/dma.c | 1 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h | 58 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf548/include/mach/defBF54x_base.h | 118 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf548/include/mach/pll.h | 69 |
6 files changed, 138 insertions, 188 deletions
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index dbb6b1d83f6d..f0c0eef95ba8 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -706,7 +706,6 @@ static struct mtd_partition partition_info[] = { }; static struct bf5xx_nand_platform bf5xx_nand_platform = { - .page_size = NFC_PG_SIZE_256, .data_width = NFC_NWIDTH_8, .partitions = partition_info, .nr_partitions = ARRAY_SIZE(partition_info), @@ -754,6 +753,44 @@ static struct platform_device bf54x_sdh_device = { }; #endif +#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +unsigned short bfin_can_peripherals[] = { + P_CAN0_RX, P_CAN0_TX, 0 +}; + +static struct resource bfin_can_resources[] = { + { + .start = 0xFFC02A00, + .end = 0xFFC02FFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CAN0_RX, + .end = IRQ_CAN0_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN0_TX, + .end = IRQ_CAN0_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN0_ERROR, + .end = IRQ_CAN0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_can_device = { + .name = "bfin_can", + .num_resources = ARRAY_SIZE(bfin_can_resources), + .resource = bfin_can_resources, + .dev = { + .platform_data = &bfin_can_peripherals, /* Passed to driver */ + }, +}; +#endif + #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition para_partitions[] = { { @@ -929,7 +966,7 @@ static struct resource bfin_spi1_resource[] = { /* SPI controller data */ static struct bfin5xx_spi_master bf54x_spi_master_info0 = { - .num_chipselect = 3, + .num_chipselect = 4, .enable_dma = 1, /* master has the ability to do dma transfer */ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; @@ -945,7 +982,7 @@ static struct platform_device bf54x_spi_master0 = { }; static struct bfin5xx_spi_master bf54x_spi_master_info1 = { - .num_chipselect = 3, + .num_chipselect = 4, .enable_dma = 1, /* master has the ability to do dma transfer */ .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, }; @@ -1153,6 +1190,11 @@ static struct platform_device *cm_bf548_devices[] __initdata = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) ¶_flash_device, #endif + +#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) + &bfin_can_device, +#endif + }; static int __init cm_bf548_init(void) diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 6fcfb9187c35..216e26999af9 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -837,8 +837,12 @@ static struct platform_device bfin_atapi_device = { #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) static struct mtd_partition partition_info[] = { { - .name = "linux kernel(nand)", + .name = "bootloader(nand)", .offset = 0, + .size = 0x80000, + }, { + .name = "linux kernel(nand)", + .offset = MTDPART_OFS_APPEND, .size = 4 * 1024 * 1024, }, { @@ -849,7 +853,6 @@ static struct mtd_partition partition_info[] = { }; static struct bf5xx_nand_platform bf5xx_nand_platform = { - .page_size = NFC_PG_SIZE_256, .data_width = NFC_NWIDTH_8, .partitions = partition_info, .nr_partitions = ARRAY_SIZE(partition_info), @@ -902,7 +905,7 @@ static struct platform_device bf54x_sdh_device = { static struct mtd_partition ezkit_partitions[] = { { .name = "bootloader(nor)", - .size = 0x40000, + .size = 0x80000, .offset = 0, }, { .name = "linux kernel(nor)", @@ -944,7 +947,7 @@ static struct platform_device ezkit_flash_device = { static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", - .size = 0x00040000, + .size = 0x00080000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { @@ -967,8 +970,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD183X) \ - || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ + || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -1024,13 +1027,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD183X) \ - || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ + || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { - .modalias = "ad1836", + .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 1, - .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .chip_select = 4, .controller_data = &ad1836_spi_chip_info, }, #endif @@ -1108,7 +1111,7 @@ static struct resource bfin_spi1_resource[] = { /* SPI controller data */ static struct bfin5xx_spi_master bf54x_spi_master_info0 = { - .num_chipselect = 3, + .num_chipselect = 4, .enable_dma = 1, /* master has the ability to do dma transfer */ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; @@ -1124,7 +1127,7 @@ static struct platform_device bf54x_spi_master0 = { }; static struct bfin5xx_spi_master bf54x_spi_master_info1 = { - .num_chipselect = 3, + .num_chipselect = 4, .enable_dma = 1, /* master has the ability to do dma transfer */ .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, }; @@ -1207,6 +1210,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { .platform_data = (void *)&adxl34x_info, }, #endif +#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) + { + I2C_BOARD_INFO("ad5252", 0x2f), + }, +#endif }; #endif diff --git a/arch/blackfin/mach-bf548/dma.c b/arch/blackfin/mach-bf548/dma.c index 039a6d9d38f3..888b9cc0b822 100644 --- a/arch/blackfin/mach-bf548/dma.c +++ b/arch/blackfin/mach-bf548/dma.c @@ -63,6 +63,7 @@ int channel2irq(unsigned int channel) break; case CH_SPORT1_TX: ret_irq = IRQ_SPORT1_TX; + break; case CH_SPI0: ret_irq = IRQ_SPI0; break; diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h index ea3ec4ea9e2b..deaf5d6542d5 100644 --- a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h @@ -40,6 +40,8 @@ /* SIC Registers */ +#define bfin_read_SIC_RVECT() bfin_read32(SIC_RVECT) +#define bfin_write_SIC_RVECT(val) bfin_write32(SIC_RVECT, val) #define bfin_read_SIC_IMASK0() bfin_read32(SIC_IMASK0) #define bfin_write_SIC_IMASK0(val) bfin_write32(SIC_IMASK0, val) #define bfin_read_SIC_IMASK1() bfin_read32(SIC_IMASK1) @@ -2648,61 +2650,5 @@ /* These need to be last due to the cdef/linux inter-dependencies */ #include <asm/irq.h> -/* Writing to PLL_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_PLL_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1, iwr2; - - if (val == bfin_read_PLL_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SIC_IWR0); - iwr1 = bfin_read32(SIC_IWR1); - iwr2 = bfin_read32(SIC_IWR2); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR0, IWR_ENABLE(0)); - bfin_write32(SIC_IWR1, 0); - bfin_write32(SIC_IWR2, 0); - - bfin_write16(PLL_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR0, iwr0); - bfin_write32(SIC_IWR1, iwr1); - bfin_write32(SIC_IWR2, iwr2); - local_irq_restore_hw(flags); -} - -/* Writing to VR_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_VR_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1, iwr2; - - if (val == bfin_read_VR_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SIC_IWR0); - iwr1 = bfin_read32(SIC_IWR1); - iwr2 = bfin_read32(SIC_IWR2); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR0, IWR_ENABLE(0)); - bfin_write32(SIC_IWR1, 0); - bfin_write32(SIC_IWR2, 0); - - bfin_write16(VR_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR0, iwr0); - bfin_write32(SIC_IWR1, iwr1); - bfin_write32(SIC_IWR2, iwr2); - local_irq_restore_hw(flags); -} - #endif /* _CDEF_BF54X_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h index 95ff44601fd1..78f91103f175 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h @@ -35,6 +35,7 @@ /* SIC Registers */ +#define SIC_RVECT 0xffc00108 #define SIC_IMASK0 0xffc0010c /* System Interrupt Mask Register 0 */ #define SIC_IMASK1 0xffc00110 /* System Interrupt Mask Register 1 */ #define SIC_IMASK2 0xffc00114 /* System Interrupt Mask Register 2 */ @@ -2061,56 +2062,6 @@ #define LOW_EVEN 0xff0000 /* Lower Limit for Even Bytes (Luma) */ #define HIGH_EVEN 0xff000000 /* Upper Limit for Even Bytes (Luma) */ -/* Bit masks for SPIx_BAUD */ - -#define SPI_BAUD 0xffff /* Baud Rate */ - -/* Bit masks for SPIx_CTL */ - -#define SPE 0x4000 /* SPI Enable */ -#define WOM 0x2000 /* Write Open Drain Master */ -#define MSTR 0x1000 /* Master Mode */ -#define CPOL 0x800 /* Clock Polarity */ -#define CPHA 0x400 /* Clock Phase */ -#define LSBF 0x200 /* LSB First */ -#define SIZE 0x100 /* Size of Words */ -#define EMISO 0x20 /* Enable MISO Output */ -#define PSSE 0x10 /* Slave-Select Enable */ -#define GM 0x8 /* Get More Data */ -#define SZ 0x4 /* Send Zero */ -#define TIMOD 0x3 /* Transfer Initiation Mode */ - -/* Bit masks for SPIx_FLG */ - -#define FLS1 0x2 /* Slave Select Enable 1 */ -#define FLS2 0x4 /* Slave Select Enable 2 */ -#define FLS3 0x8 /* Slave Select Enable 3 */ -#define FLG1 0x200 /* Slave Select Value 1 */ -#define FLG2 0x400 /* Slave Select Value 2 */ -#define FLG3 0x800 /* Slave Select Value 3 */ - -/* Bit masks for SPIx_STAT */ - -#define TXCOL 0x40 /* Transmit Collision Error */ -#define RXS 0x20 /* RDBR Data Buffer Status */ -#define RBSY 0x10 /* Receive Error */ -#define TXS 0x8 /* TDBR Data Buffer Status */ -#define TXE 0x4 /* Transmission Error */ -#define MODF 0x2 /* Mode Fault Error */ -#define SPIF 0x1 /* SPI Finished */ - -/* Bit masks for SPIx_TDBR */ - -#define TDBR 0xffff /* Transmit Data Buffer */ - -/* Bit masks for SPIx_RDBR */ - -#define RDBR 0xffff /* Receive Data Buffer */ - -/* Bit masks for SPIx_SHADOW */ - -#define SHADOW 0xffff /* RDBR Shadow */ - /* ************************************************ */ /* The TWI bit masks fields are from the ADSP-BF538 */ /* and they have not been verified as the final */ @@ -2221,73 +2172,6 @@ #define RCVDATA16 0xffff /* Receive FIFO 16-Bit Data */ -/* Bit masks for SPORTx_TCR1 */ - -#define TCKFE 0x4000 /* Clock Falling Edge Select */ -#define LATFS 0x2000 /* Late Transmit Frame Sync */ -#define LTFS 0x1000 /* Low Transmit Frame Sync Select */ -#define DITFS 0x800 /* Data-Independent Transmit Frame Sync Select */ -#define TFSR 0x400 /* Transmit Frame Sync Required Select */ -#define ITFS 0x200 /* Internal Transmit Frame Sync Select */ -#define TLSBIT 0x10 /* Transmit Bit Order */ -#define TDTYPE 0xc /* Data Formatting Type Select */ -#define ITCLK 0x2 /* Internal Transmit Clock Select */ -#define TSPEN 0x1 /* Transmit Enable */ - -/* Bit masks for SPORTx_TCR2 */ - -#define TRFST 0x400 /* Left/Right Order */ -#define TSFSE 0x200 /* Transmit Stereo Frame Sync Enable */ -#define TXSE 0x100 /* TxSEC Enable */ -#define SLEN_T 0x1f /* SPORT Word Length */ - -/* Bit masks for SPORTx_RCR1 */ - -#define RCKFE 0x4000 /* Clock Falling Edge Select */ -#define LARFS 0x2000 /* Late Receive Frame Sync */ -#define LRFS 0x1000 /* Low Receive Frame Sync Select */ -#define RFSR 0x400 /* Receive Frame Sync Required Select */ -#define IRFS 0x200 /* Internal Receive Frame Sync Select */ -#define RLSBIT 0x10 /* Receive Bit Order */ -#define RDTYPE 0xc /* Data Formatting Type Select */ -#define IRCLK 0x2 /* Internal Receive Clock Select */ -#define RSPEN 0x1 /* Receive Enable */ - -/* Bit masks for SPORTx_RCR2 */ - -#define RRFST 0x400 /* Left/Right Order */ -#define RSFSE 0x200 /* Receive Stereo Frame Sync Enable */ -#define RXSE 0x100 /* RxSEC Enable */ -#define SLEN_R 0x1f /* SPORT Word Length */ - -/* Bit masks for SPORTx_STAT */ - -#define TXHRE 0x40 /* Transmit Hold Register Empty */ -#define TOVF 0x20 /* Sticky Transmit Overflow Status */ -#define TUVF 0x10 /* Sticky Transmit Underflow Status */ -#define TXF 0x8 /* Transmit FIFO Full Status */ -#define ROVF 0x4 /* Sticky Receive Overflow Status */ -#define RUVF 0x2 /* Sticky Receive Underflow Status */ -#define RXNE 0x1 /* Receive FIFO Not Empty Status */ - -/* Bit masks for SPORTx_MCMC1 */ - -#define SP_WSIZE 0xf000 /* Window Size */ -#define SP_WOFF 0x3ff /* Windows Offset */ - -/* Bit masks for SPORTx_MCMC2 */ - -#define MFD 0xf000 /* Multi channel Frame Delay */ -#define FSDR 0x80 /* Frame Sync to Data Relationship */ -#define MCMEN 0x10 /* Multi channel Frame Mode Enable */ -#define MCDRXPE 0x8 /* Multi channel DMA Receive Packing */ -#define MCDTXPE 0x4 /* Multi channel DMA Transmit Packing */ -#define MCCRM 0x3 /* 2X Clock Recovery Mode */ - -/* Bit masks for SPORTx_CHNL */ - -#define CUR_CHNL 0x3ff /* Current Channel Indicator */ - /* Bit masks for UARTx_LCR */ #if 0 diff --git a/arch/blackfin/mach-bf548/include/mach/pll.h b/arch/blackfin/mach-bf548/include/mach/pll.h new file mode 100644 index 000000000000..7865a090d333 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/pll.h @@ -0,0 +1,69 @@ +/* + * Copyright 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _MACH_PLL_H +#define _MACH_PLL_H + +#include <asm/blackfin.h> +#include <asm/irqflags.h> + +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1, iwr2; + + if (val == bfin_read_PLL_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + iwr2 = bfin_read32(SIC_IWR2); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + bfin_write32(SIC_IWR2, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + bfin_write32(SIC_IWR2, iwr2); + hard_local_irq_restore(flags); +} + +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1, iwr2; + + if (val == bfin_read_VR_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + iwr2 = bfin_read32(SIC_IWR2); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + bfin_write32(SIC_IWR2, 0); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + bfin_write32(SIC_IWR2, iwr2); + hard_local_irq_restore(flags); +} + +#endif /* _MACH_PLL_H */ |
