diff options
Diffstat (limited to 'arch/arm')
765 files changed, 20825 insertions, 15860 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4700294f4e09..0d4e71b42c77 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -5,10 +5,15 @@ config ARM select ARCH_HAS_DEBUG_VIRTUAL select ARCH_HAS_DEVMEM_IS_ALLOWED select ARCH_HAS_ELF_RANDOMIZE + select ARCH_HAS_SET_MEMORY + select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL + select ARCH_HAS_STRICT_MODULE_RWX if MMU select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_HAVE_CUSTOM_GPIO_H select ARCH_HAS_GCOV_PROFILE_ALL select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX + select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7 select ARCH_SUPPORTS_ATOMIC_RMW select ARCH_USE_BUILTIN_BSWAP select ARCH_USE_CMPXCHG_LOCKREF @@ -1503,8 +1508,7 @@ source kernel/Kconfig.preempt config HZ_FIXED int - default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \ - ARCH_S5PV210 || ARCH_EXYNOS4 + default 200 if ARCH_EBSA110 default 128 if SOC_AT91RM9200 default 0 diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index d83f7c369e51..426d2716f55d 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1738,17 +1738,6 @@ config PID_IN_CONTEXTIDR additional instructions during context switch. Say Y here only if you are planning to use hardware trace tools with this kernel. -config DEBUG_SET_MODULE_RONX - bool "Set loadable kernel module data as NX and text as RO" - depends on MODULES && MMU - ---help--- - This option helps catch unintended modifications to loadable - kernel module's text and read-only data. It also prevents execution - of module data. Such protection may interfere with run-time code - patching and dynamic kernel tracing - and they might also protect - against certain classes of kernel exploits. - If in doubt, say "N". - source "drivers/hwtracing/coresight/Kconfig" endmenu diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index fc6d541549a2..9150f9732785 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -1196,7 +1196,7 @@ skip: bgt loop1 finished: ldmfd sp!, {r0-r7, r9-r11} - mov r10, #0 @ swith back to cache level 0 + mov r10, #0 @ switch back to cache level 0 mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr iflush: mcr p15, 0, r10, c7, c10, 4 @ DSB diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cccdbcb557b6..011808490fed 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -48,11 +48,13 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ at91-kizbox2.dtb \ at91-sama5d2_xplained.dtb \ at91-sama5d3_xplained.dtb \ + at91-tse850-3.dtb \ sama5d31ek.dtb \ sama5d33ek.dtb \ sama5d34ek.dtb \ sama5d35ek.dtb \ sama5d36ek.dtb \ + sama5d36ek_cmp.dtb \ at91-sama5d4_ma5d4evk.dtb \ at91-sama5d4_xplained.dtb \ at91-sama5d4ek.dtb \ @@ -83,6 +85,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47081-asus-rt-n18u.dtb \ bcm47081-buffalo-wzr-600dhp2.dtb \ bcm47081-buffalo-wzr-900dhp.dtb \ + bcm47081-luxul-xap-1410.dtb \ + bcm47081-luxul-xwr-1200.dtb \ bcm4709-asus-rt-ac87u.dtb \ bcm4709-buffalo-wxr-1900dhp.dtb \ bcm4709-netgear-r7000.dtb \ @@ -128,7 +132,8 @@ dtb-$(CONFIG_ARCH_CLPS711X) += \ dtb-$(CONFIG_ARCH_DAVINCI) += \ da850-lcdk.dtb \ da850-enbw-cmc.dtb \ - da850-evm.dtb + da850-evm.dtb \ + da850-lego-ev3.dtb dtb-$(CONFIG_ARCH_DIGICOLOR) += \ cx92755_equinox.dtb dtb-$(CONFIG_ARCH_EFM32) += \ @@ -349,6 +354,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-gw553x.dtb \ imx6dl-hummingboard.dtb \ imx6dl-icore.dtb \ + imx6dl-icore-rqs.dtb \ imx6dl-nit6xlite.dtb \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-pbab01.dtb \ @@ -357,6 +363,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-sabreauto.dtb \ imx6dl-sabrelite.dtb \ imx6dl-sabresd.dtb \ + imx6dl-savageboard.dtb \ imx6dl-ts4900.dtb \ imx6dl-tx6dl-comtft.dtb \ imx6dl-tx6s-8034.dtb \ @@ -393,6 +400,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-icore.dtb \ imx6q-icore-rqs.dtb \ imx6q-marsboard.dtb \ + imx6q-mccmon6.dtb \ imx6q-nitrogen6x.dtb \ imx6q-nitrogen6_max.dtb \ imx6q-nitrogen6_som2.dtb \ @@ -402,6 +410,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ + imx6q-savageboard.dtb \ imx6q-sbc6x.dtb \ imx6q-tbs2910.dtb \ imx6q-ts4900.dtb \ @@ -434,7 +443,10 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-14x14-evk.dtb \ imx6ul-geam-kit.dtb \ + imx6ul-isiot-emmc.dtb \ + imx6ul-isiot-nand.dtb \ imx6ul-liteboard.dtb \ + imx6ul-opos6uldev.dtb \ imx6ul-pico-hobbit.dtb \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ @@ -458,7 +470,8 @@ dtb-$(CONFIG_SOC_VF610) += \ vf610-cosmic.dtb \ vf610m4-cosmic.dtb \ vf610-twr.dtb \ - vf610-zii-dev-rev-b.dtb + vf610-zii-dev-rev-b.dtb \ + vf610-zii-dev-rev-c.dtb dtb-$(CONFIG_ARCH_MXS) += \ imx23-evk.dtb \ imx23-olinuxino.dtb \ @@ -501,6 +514,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ am3517-evm.dtb \ am3517_mt_ventoux.dtb \ logicpd-torpedo-37xx-devkit.dtb \ + logicpd-som-lv-37xx-devkit.dtb \ omap3430-sdp.dtb \ omap3-beagle.dtb \ omap3-beagle-xm.dtb \ @@ -563,7 +577,9 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ + am335x-boneblack-wireless.dtb \ am335x-bonegreen.dtb \ + am335x-bonegreen-wireless.dtb \ am335x-chiliboard.dtb \ am335x-cm-t335.dtb \ am335x-evm.dtb \ @@ -572,6 +588,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-lxm.dtb \ am335x-nano.dtb \ am335x-pepper.dtb \ + am335x-phycore-rdk.dtb \ am335x-shc.dtb \ am335x-sbc-t335.dtb \ am335x-sl50.dtb \ @@ -616,7 +633,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-lacie-ethernet-disk-mini-v2.dtb \ orion5x-linkstation-lsgl.dtb \ orion5x-linkstation-lswtgl.dtb \ - orion5x-lschl.dtb \ + orion5x-linkstation-lschl.dtb \ orion5x-lswsgl.dtb \ orion5x-maxtor-shared-storage-2.dtb \ orion5x-netgear-wnr854t.dtb \ @@ -717,6 +734,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ + socfpga_arria10_socdk_nand.dtb \ socfpga_arria10_socdk_qspi.dtb \ socfpga_arria10_socdk_sdmmc.dtb \ socfpga_cyclone5_mcvevk.dtb \ @@ -781,6 +799,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a13-empire-electronix-m712.dtb \ sun5i-a13-hsg-h702.dtb \ sun5i-a13-inet-98v-rev2.dtb \ + sun5i-a13-licheepi-one.dtb \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb \ sun5i-a13-q8-tablet.dtb \ @@ -844,7 +863,10 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a33-sinlinx-sina33.dtb \ sun8i-a83t-allwinner-h8homlet-v2.dtb \ sun8i-a83t-cubietruck-plus.dtb \ + sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ + sun8i-h3-beelink-x2.dtb \ + sun8i-h3-nanopi-m1.dtb \ sun8i-h3-nanopi-neo.dtb \ sun8i-h3-orangepi-2.dtb \ sun8i-h3-orangepi-lite.dtb \ @@ -853,7 +875,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-pc-plus.dtb \ sun8i-h3-orangepi-plus.dtb \ sun8i-h3-orangepi-plus2e.dtb \ - sun8i-r16-parrot.dtb + sun8i-r16-parrot.dtb \ + sun8i-v3s-licheepi-zero.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb @@ -949,6 +972,8 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \ armada-385-linksys-cobra.dtb \ armada-385-turris-omnia.dtb \ armada-388-clearfog.dtb \ + armada-388-clearfog-base.dtb \ + armada-388-clearfog-pro.dtb \ armada-388-db.dtb \ armada-388-gp.dtb \ armada-388-rd.dtb @@ -957,6 +982,8 @@ dtb-$(CONFIG_MACH_ARMADA_39X) += \ dtb-$(CONFIG_MACH_ARMADA_XP) += \ armada-xp-axpwifiap.dtb \ armada-xp-db.dtb \ + armada-xp-db-dxbc2.dtb \ + armada-xp-db-xc3-24g4xg.dtb \ armada-xp-gp.dtb \ armada-xp-lenovo-ix4-300d.dtb \ armada-xp-linksys-mamba.dtb \ @@ -981,6 +1008,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt8135-evbp1.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \ + aspeed-bmc-opp-romulus.dtb \ aspeed-ast2500-evb.dtb endif diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi index db8752fc480e..d0eefc3b886c 100644 --- a/arch/arm/boot/dts/alpine.dtsi +++ b/arch/arm/boot/dts/alpine.dtsi @@ -93,7 +93,7 @@ interrupt-controller; reg = <0x0 0xfb001000 0x0 0x1000>, <0x0 0xfb002000 0x0 0x2000>, - <0x0 0xfb004000 0x0 0x1000>, + <0x0 0xfb004000 0x0 0x2000>, <0x0 0xfb006000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index dc561d505bbe..bf6b26abe35b 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -6,8 +6,6 @@ * published by the Free Software Foundation. */ -#include <dt-bindings/mfd/tps65217.h> - / { cpus { cpu@0 { @@ -209,6 +207,8 @@ &usb0 { status = "okay"; dr_mode = "peripheral"; + interrupts-extended = <&intc 18 &tps 0>; + interrupt-names = "mc", "vbus"; }; &usb1 { @@ -319,13 +319,13 @@ ti,pmic-shutdown-controller; charger { - interrupts = <TPS65217_IRQ_AC>, <TPS65217_IRQ_USB>; - interrupts-names = "AC", "USB"; + interrupts = <0>, <1>; + interrupt-names = "USB", "AC"; status = "okay"; }; pwrbutton { - interrupts = <TPS65217_IRQ_PB>; + interrupts = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi new file mode 100644 index 000000000000..325daae40278 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi @@ -0,0 +1,163 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/display/tda998x.h> + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; + + mcasp0_pins: mcasp0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; +}; + +&lcdc { + status = "okay"; + + /* If you want to get 24 bit RGB and 16 BGR mode instead of + * current 16 bit RGB and 24 BGR modes, set the propety + * below to "crossed" and uncomment the video-ports -property + * in tda19988 node. + */ + blue-and-red-wiring = "straight"; + + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988: tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */ + /* video-ports = <0x234501>; */ + + #sound-dai-cells = <0>; + audio-ports = < TDA998x_I2S 0x03>; + + ports { + port@0 { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; + }; +}; + +&rtc { + system-power-controller; +}; + +&mcasp0 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + status = "okay"; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + +/ { + clk_mcasp0_fixed: clk_mcasp0_fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk_mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "TI BeagleBone Black"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; + + dailink0_master: simple-audio-card,cpu { + sound-dai = <&mcasp0>; + clocks = <&clk_mcasp0>; + }; + + simple-audio-card,codec { + sound-dai = <&tda19988>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts new file mode 100644 index 000000000000..105bd10655f7 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts @@ -0,0 +1,109 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-boneblack-common.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "TI AM335x BeagleBone Black Wireless"; + compatible = "ti,am335x-bone-black-wireless", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; + + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us= <70000>; + + /* WL_EN */ + gpio = <&gpio3 9 0>; + enable-active-high; + }; +}; + +&am33xx_pinmux { + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gmii1_txd0.gpio0_28 - BT_EN */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */ + AM33XX_IOPAD(0x914, PIN_INPUT_PULLUP | MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */ + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */ + AM33XX_IOPAD(0x920, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */ + AM33XX_IOPAD(0x908, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* gmii1_rxd3.uart3_rxd */ + AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gmii1_rxd2.uart3_txd */ + AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* mdio_data.uart3_ctsn */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* mdio_clk.uart3_rtsn */ + >; + }; + + wl18xx_pins: pinmux_wl18xx_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gmii1_txclk.gpio3_9 WL_EN */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk.gpio0_29 WL_IRQ */ + AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gmii1_rxclk.gpio3_10 LS_BUF_EN */ + >; + }; +}; + +&mac { + status = "disabled"; +}; + +&mmc3 { + dmas = <&edma_xbar 12 0 1 + &edma_xbar 13 0 2>; + dma-names = "tx", "rx"; + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + non-removable; + cap-power-off-card; + ti,needs-special-hs-handling; + keep-power-in-suspend; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins &wl18xx_pins>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins &bt_pins>; + status = "okay"; +}; + +&gpio3 { + ls_buf_en { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LS_BUF_EN"; + }; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index db00d8ef7b19..77273df1a028 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -9,162 +9,9 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" -#include <dt-bindings/display/tda998x.h> +#include "am335x-boneblack-common.dtsi" / { model = "TI AM335x BeagleBone Black"; compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; }; - -&ldo3_reg { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; -}; - -&mmc1 { - vmmc-supply = <&vmmcsd_fixed>; -}; - -&mmc2 { - vmmc-supply = <&vmmcsd_fixed>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_pins>; - bus-width = <8>; - status = "okay"; -}; - -&am33xx_pinmux { - nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ - >; - }; - nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ - >; - }; - - mcasp0_pins: mcasp0_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ - AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ - AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ - AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ - AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ - >; - }; -}; - -&lcdc { - status = "okay"; - - /* If you want to get 24 bit RGB and 16 BGR mode instead of - * current 16 bit RGB and 24 BGR modes, set the propety - * below to "crossed" and uncomment the video-ports -property - * in tda19988 node. - */ - blue-and-red-wiring = "straight"; - - port { - lcdc_0: endpoint@0 { - remote-endpoint = <&hdmi_0>; - }; - }; -}; - -&i2c0 { - tda19988: tda19988 { - compatible = "nxp,tda998x"; - reg = <0x70>; - - pinctrl-names = "default", "off"; - pinctrl-0 = <&nxp_hdmi_bonelt_pins>; - pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; - - /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */ - /* video-ports = <0x234501>; */ - - #sound-dai-cells = <0>; - audio-ports = < TDA998x_I2S 0x03>; - - ports { - port@0 { - hdmi_0: endpoint@0 { - remote-endpoint = <&lcdc_0>; - }; - }; - }; - }; -}; - -&rtc { - system-power-controller; -}; - -&mcasp0 { - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mcasp0_pins>; - status = "okay"; - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ - 0 0 1 0 - >; - tx-num-evt = <32>; - rx-num-evt = <32>; -}; - -/ { - clk_mcasp0_fixed: clk_mcasp0_fixed { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24576000>; - }; - - clk_mcasp0: clk_mcasp0 { - #clock-cells = <0>; - compatible = "gpio-gate-clock"; - clocks = <&clk_mcasp0_fixed>; - enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */ - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "TI BeagleBone Black"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&dailink0_master>; - simple-audio-card,frame-master = <&dailink0_master>; - - dailink0_master: simple-audio-card,cpu { - sound-dai = <&mcasp0>; - clocks = <&clk_mcasp0>; - }; - - simple-audio-card,codec { - sound-dai = <&tda19988>; - }; - }; -}; diff --git a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi new file mode 100644 index 000000000000..853e6d3a028d --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + uart2_pins: uart2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ + AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&rtc { + system-power-controller; +}; diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts new file mode 100644 index 000000000000..9d1a0fd555f3 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts @@ -0,0 +1,126 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-bonegreen-common.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "TI AM335x BeagleBone Green Wireless"; + compatible = "ti,am335x-bone-green-wireless", "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; + + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us= <70000>; + + /* WL_EN */ + gpio = <&gpio0 26 0>; + enable-active-high; + }; +}; + +&am33xx_pinmux { + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_28 BT_EN */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */ + AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */ + AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */ + AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */ + AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* gmii1_rxd3.uart3_rxd */ + AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gmii1_rxd2.uart3_txd */ + AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* mdio_data.uart3_ctsn */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* mdio_clk.uart3_rtsn */ + >; + }; + + wl18xx_pins: pinmux_wl18xx_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x828, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN */ + AM33XX_IOPAD(0x82C, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ */ + AM33XX_IOPAD(0x87C, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 LS_BUF_EN */ + >; + }; +}; + +&mac { + status = "disabled"; +}; + +&mmc3 { + dmas = <&edma_xbar 12 0 1 + &edma_xbar 13 0 2>; + dma-names = "tx", "rx"; + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + non-removable; + cap-power-off-card; + ti,needs-special-hs-handling; + keep-power-in-suspend; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins &wl18xx_pins>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins &bt_pins>; + status = "okay"; +}; + +&gpio1 { + ls_buf_en { + gpio-hog; + gpios = <29 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LS_BUF_EN"; + }; +}; + +/* BT_AUD_OUT from wl1835 has to be pulled low when WL_EN is activated.*/ +/* in case it isn't, wilink8 ends up in one of the test modes that */ +/* intruces various issues (elp wkaeup timeouts etc.) */ +/* On the BBGW this pin is routed through the level shifter (U21) that */ +/* introduces a pullup on the line and wilink8 ends up in a bad state. */ +/* use a gpio hog to force this pin low. An alternative may be adding */ +/* an external pulldown on U21 pin 4. */ + +&gpio3 { + bt_aud_in { + gpio-hog; + gpios = <16 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "MCASP0_AHCLKR"; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts index dce3c8657e04..a8b4d969ce2a 100644 --- a/arch/arm/boot/dts/am335x-bonegreen.dts +++ b/arch/arm/boot/dts/am335x-bonegreen.dts @@ -9,45 +9,9 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" +#include "am335x-bonegreen-common.dtsi" / { model = "TI AM335x BeagleBone Green"; compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; }; - -&ldo3_reg { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; -}; - -&mmc1 { - vmmc-supply = <&vmmcsd_fixed>; -}; - -&mmc2 { - vmmc-supply = <&vmmcsd_fixed>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_pins>; - bus-width = <8>; - status = "okay"; -}; - -&am33xx_pinmux { - uart2_pins: uart2_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ - AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ - >; - }; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - status = "okay"; -}; - -&rtc { - system-power-controller; -}; diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts index 2a624b3c9258..d8769799772e 100644 --- a/arch/arm/boot/dts/am335x-chiliboard.dts +++ b/arch/arm/boot/dts/am335x-chiliboard.dts @@ -185,3 +185,19 @@ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; status = "okay"; }; + +&tps { + interrupt-parent = <&intc>; + interrupts = <7>; /* NNMI */ + + charger { + interrupts = <0>, <1>; + interrupt-names = "USB", "AC"; + status = "okay"; + }; + + pwrbutton { + interrupts = <2>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi index f9ee5859c154..1b43ebd08b38 100644 --- a/arch/arm/boot/dts/am335x-chilisom.dtsi +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -124,6 +124,14 @@ &rtc { system-power-controller; + + pinctrl-0 = <&ext_wakeup>; + pinctrl-names = "default"; + + ext_wakeup: ext-wakeup { + pins = "ext_wakeup0"; + input-enable; + }; }; /* NAND Flash */ diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index c2186ec2834b..1c37a7c1ea17 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -25,6 +25,10 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + chosen { + stdout-path = &uart0; + }; + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index e2548d1ce753..9e43c443738a 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -32,6 +32,10 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + chosen { + stdout-path = &uart0; + }; + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 1463df3b5b19..a2ad076822db 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -24,6 +24,10 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + chosen { + stdout-path = &uart3; + }; + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -170,7 +174,6 @@ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE5) /* (C15) spi0_cs1.mmc0_sdcd */ >; }; diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index 483d585c8908..807494bc722b 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -249,7 +249,8 @@ #address-cells = <2>; #size-cells = <1>; - ranges = <0 0 0x08000000 0x08000000>; /* CS0: NOR 128M */ + ranges = <0 0 0x08000000 0x08000000>, /* CS0: NOR 128M */ + <1 0 0x1c000000 0x01000000>; /* CS1: FRAM 16M */ nor@0,0 { reg = <0 0x00000000 0x08000000>; @@ -342,6 +343,34 @@ reg = <0x04000000 0x04000000>; /* 64MB */ }; }; + + fram@1,0 { + reg = <1 0x00000000 0x01000000>; + bank-width = <2>; + + gpmc,mux-add-data = <2>; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <160>; + gpmc,cs-wr-off-ns = <160>; + gpmc,adv-on-ns = <10>; + gpmc,adv-rd-off-ns = <20>; + gpmc,adv-wr-off-ns = <20>; + gpmc,oe-on-ns = <30>; + gpmc,oe-off-ns = <150>; + gpmc,we-on-ns = <30>; + gpmc,we-off-ns = <150>; + gpmc,rd-cycle-ns = <160>; + gpmc,wr-cycle-ns = <160>; + gpmc,access-ns = <130>; + gpmc,page-burst-access-ns = <10>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; + gpmc,cycle2cycle-delay-ns = <10>; + gpmc,wr-data-mux-bus-ns = <30>; + gpmc,wr-access-ns = <0>; + }; }; &mac { diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi new file mode 100644 index 000000000000..02981eae96b9 --- /dev/null +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -0,0 +1,288 @@ +/* + * Copyright (C) 2014-2017 Phytec Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de> + * Teresa Remmet <t.remmet@phytec.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/input/input.h> + +/ { + model = "Phytec AM335x PCM-953"; + compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx"; + + /* Power */ + regulators { + vcc3v3: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + vcc1v8: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + }; + + /* User IO */ + user_leds: user_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_pins>; + + green { + label = "green:user"; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "on"; + }; + + yellow { + label = "yellow:user"; + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + linux,default-trigger = "gpio"; + default-state = "on"; + }; + }; + + user_buttons: user_buttons { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&user_buttons_pins>; + + button@0 { + label = "home"; + linux,code = <KEY_HOME>; + gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; + gpio-key,wakeup; + }; + + button@1 { + label = "menu"; + linux,code = <KEY_MENU>; + gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; + gpio-key,wakeup; + }; + + }; +}; + +&am33xx_pinmux { + user_buttons_pins: pinmux_user_buttons { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* emu0.gpio3_7 */ + AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* emu1.gpio3_8 */ + >; + }; + + user_leds_pins: pinmux_user_leds { + pinctrl-single,pins = < + AM33XX_IOPAD(0x880, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */ + AM33XX_IOPAD(0x884, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */ + >; + }; +}; + +/* CAN */ +&am33xx_pinmux { + dcan1_pins: pinmux_dcan1 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x980, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart1_rxd.dcan1_tx_mux2 */ + AM33XX_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.dcan1_rx_mux2 */ + >; + }; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + status = "okay"; +}; + +/* Ethernet */ +&am33xx_pinmux { + ethernet1_pins: pinmux_ethernet1 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ + AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + >; + }; +}; + +&cpsw_emac1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <2>; + status = "okay"; +}; + +&davinci_mdio { + phy1: ethernet-phy@2 { + reg = <2>; + + /* Register 260 (104h) – RGMII Clock and Control Pad Skew */ + rxc-skew-ps = <1400>; + rxdv-skew-ps = <0>; + txc-skew-ps = <1400>; + txen-skew-ps = <0>; + /* Register 261 (105h) – RGMII RX Data Pad Skew */ + rxd3-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd0-skew-ps = <0>; + /* Register 262 (106h) – RGMII TX Data Pad Skew */ + txd3-skew-ps = <0>; + txd2-skew-ps = <0>; + txd1-skew-ps = <0>; + txd0-skew-ps = <0>; + }; +}; + +&mac { + slaves = <2>; + pinctrl-names = "default"; + pinctrl-0 = <ðernet0_pins ðernet1_pins>; + dual_emac; +}; + +/* Misc */ +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&cb_gpio_pins>; + + cb_gpio_pins: pinmux_cb_gpio { + pinctrl-single,pins = < + AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart0_ctsn.gpio1_8 */ + AM33XX_IOPAD(0x96c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart0_rtsn.gpio1_9 */ + >; + }; +}; + +/* MMC */ +&am33xx_pinmux { + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ + >; + }; +}; + +&mmc1 { + vmmc-supply = <&vcc3v3>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +/* UARTs */ +&am33xx_pinmux { + uart0_pins: pinmux_uart0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart1_pins: pinmux_uart1 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ + AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + >; + }; + + uart2_pins: pinmux_uart2 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ + AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_rx_clk.uart2_txd */ + >; + }; + + uart3_pins: pinmux_uart3 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd3.uart3_rxd */ + AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd2.uart3_txd */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "okay"; +}; + +/* USB */ +&cppi41dma { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&usb1_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-phycore-rdk.dts b/arch/arm/boot/dts/am335x-phycore-rdk.dts new file mode 100644 index 000000000000..305f0b35d6ea --- /dev/null +++ b/arch/arm/boot/dts/am335x-phycore-rdk.dts @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2014 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "am335x-phycore-som.dtsi" +#include "am335x-pcm-953.dtsi" + +/* SoM */ +&i2c_eeprom { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +&serial_flash { + status = "okay"; + +}; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 75e24add3f13..14533ff6d0ad 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -78,7 +78,7 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&phy0>; phy-mode = "rmii"; dual_emac_res_vlan = <1>; }; @@ -87,6 +87,10 @@ pinctrl-names = "default"; pinctrl-0 = <&mdio_pins>; status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; }; &mac { @@ -120,6 +124,12 @@ reg = <0x2d>; }; + i2c_tmp102: temp@4b { + compatible = "ti,tmp102"; + reg = <0x4b>; + status = "disabled"; + }; + i2c_eeprom: eeprom@52 { compatible = "atmel,24c32"; pagesize = <32>; @@ -201,43 +211,6 @@ #address-cells = <1>; #size-cells = <1>; - - partition@0 { - label = "xload"; - reg = <0x0 0x20000>; - }; - partition@1 { - label = "xload_backup1"; - reg = <0x20000 0x20000>; - }; - partition@2 { - label = "xload_backup2"; - reg = <0x40000 0x20000>; - }; - partition@3 { - label = "xload_backup3"; - reg = <0x60000 0x20000>; - }; - partition@4 { - label = "barebox"; - reg = <0x80000 0x80000>; - }; - partition@5 { - label = "bareboxenv"; - reg = <0x100000 0x40000>; - }; - partition@6 { - label = "oftree"; - reg = <0x140000 0x40000>; - }; - partition@7 { - label = "kernel"; - reg = <0x180000 0x800000>; - }; - partition@8 { - label = "root"; - reg = <0x980000 0x0>; - }; }; }; @@ -341,33 +314,12 @@ status = "okay"; serial_flash: m25p80@0 { - compatible = "m25p80"; + compatible = "jedec,spi-nor"; spi-max-frequency = <48000000>; reg = <0x0>; m25p,fast-read; status = "disabled"; #address-cells = <1>; #size-cells = <1>; - - partition@0 { - label = "xload"; - reg = <0x0 0x20000>; - }; - partition@1 { - label = "barebox"; - reg = <0x20000 0x80000>; - }; - partition@2 { - label = "bareboxenv"; - reg = <0xa0000 0x20000>; - }; - partition@3 { - label = "oftree"; - reg = <0xc0000 0x20000>; - }; - partition@4 { - label = "kernel"; - reg = <0xe0000 0x0>; - }; }; }; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index b0dfa6f14cd5..c5d2589c55fc 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -136,6 +136,13 @@ >; }; + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + >; + }; + uart4_pins: pinmux_uart4_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* gpmc_wait0.uart4_rxd */ @@ -150,13 +157,6 @@ >; }; - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rxd.i2c1_sda */ - AM33XX_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_txdi2c1_scl */ - >; - }; - i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ @@ -262,6 +262,16 @@ >; }; + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_MOSI - spi0_d0.spi0_d0 */ + AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_MISO - spi0_d1.spi0_d1 */ + AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CLK - spi0_clk.spi0_clk */ + AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CS0 (NBATTSS) - spi0_cs0.spi0_cs0 */ + AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CS1 (FPGA_FLASH_NCS) - spi0_cs1.spi0_cs1 */ + >; + }; + lwb_pins: pinmux_lwb_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7) /* SoundPA_en - mcasp0_fsr.gpio3_19 */ @@ -292,16 +302,22 @@ reg = <0x24>; }; + bq32000: rtc@68 { + compatible = "ti,bq32000"; + trickle-resistor-ohms = <1120>; + reg = <0x68>; + }; + eeprom: eeprom@50 { compatible = "at,24c256"; reg = <0x50>; }; -}; -&i2c1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; + gpio_exp: mcp23017@20 { + compatible = "microchip,mcp23017"; + reg = <0x20>; + }; + }; &i2c2 { @@ -321,6 +337,16 @@ DRVDD-supply = <&ldo4_reg>; DVDD-supply = <&ldo3_reg>; }; + + /* Ambient Light Sensor */ + als: isl29023@44 { + compatible = "isil,isl29023"; + reg = <0x44>; + }; +}; + +&rtc { + status = "disabled"; }; &usb { @@ -394,12 +420,32 @@ pinctrl-0 = <&uart0_pins>; }; +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + &uart4 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart4_pins>; }; +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + + flash: n25q032@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q032"; + reg = <1>; + spi-max-frequency = <5000000>; + }; +}; + #include "tps65217.dtsi" &tps { diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index 02c67365c4e1..8ce541739b24 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -119,11 +119,17 @@ }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <&phy1>; phy-mode = "mii"; dual_emac_res_vlan = <2>; }; +&davinci_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mac { slaves = <2>; pinctrl-names = "default"; @@ -206,7 +212,6 @@ }; &usb0 { - dr_mode = "peripheral"; status = "okay"; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 64c8aa9057a3..9e96d60976b7 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -16,6 +16,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c0; @@ -144,10 +145,11 @@ }; scm_conf: scm_conf@0 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x0 0x800>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0 0x800>; scm_clocks: clocks { #address-cells = <1>; @@ -781,7 +783,6 @@ cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; - no_bd_ram = <0>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index ac55f93fc91e..97fcaf415de1 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -16,6 +16,7 @@ interrupt-parent = <&wakeupgen>; #address-cells = <1>; #size-cells = <1>; + chosen { }; memory@0 { device_type = "memory"; @@ -669,7 +670,6 @@ cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; - no_bd_ram = <0>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 957840cc7b78..a4f31739057f 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -23,6 +23,10 @@ display0 = &lcd0; }; + chosen { + stdout-path = &uart0; + }; + evm_v3_3d: fixedregulator-v3_3d { compatible = "regulator-fixed"; regulator-name = "evm_v3_3d"; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index b76a7c0264a5..c1f7f9336e64 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -18,6 +18,10 @@ model = "TI AM437x Industrial Development Kit"; compatible = "ti,am437x-idk-evm","ti,am4372","ti,am43"; + chosen { + stdout-path = &uart0; + }; + v24_0d: fixed-regulator-v24_0d { compatible = "regulator-fixed"; regulator-name = "V24_0D"; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 319d94205350..4dc54bee2f36 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -24,6 +24,10 @@ display0 = &lcd0; }; + chosen { + stdout-path = &uart0; + }; + /* fixed 32k external oscillator clock */ clk_32k_rtc: clk_32k_rtc { #clock-cells = <0>; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 9d35c3f07cad..9acd4ccdec4e 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -24,6 +24,10 @@ display0 = &lcd0; }; + chosen { + stdout-path = &uart0; + }; + vmmcsd_fixed: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index d6e43e5184c1..ad68d1eb3bc3 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -62,11 +62,6 @@ linux,default-trigger = "mmc0"; }; }; - - extcon_usb2: extcon_usb2 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; - }; }; &mmc1 { @@ -79,3 +74,8 @@ &omap_dwc3_2 { extcon = <&extcon_usb2>; }; + +&extcon_usb2 { + id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index 27d9149cedba..8350b4b34b08 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -23,11 +23,6 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; - extcon_usb2: extcon_usb2 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; - }; - status-leds { compatible = "gpio-leds"; cpu0-led { @@ -76,6 +71,11 @@ extcon = <&extcon_usb2>; }; +&extcon_usb2 { + id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; +}; + &mmc1 { status = "okay"; vmmc-supply = <&v3_3d>; @@ -87,3 +87,7 @@ &sn65hvs882 { load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; }; + +&pcie1 { + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 78bee26361f1..585d792a8fdd 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -22,6 +22,10 @@ display0 = &hdmi0; }; + chosen { + stdout-path = &uart3; + }; + memory@0 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; @@ -421,19 +425,29 @@ <&dra7_pmx_core 0x3f8>; }; +&davinci_mdio { + phy0: ethernet-phy@1 { + reg = <1>; + }; + + phy1: ethernet-phy@2 { + reg = <2>; + }; +}; + &mac { status = "okay"; dual_emac; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <&phy0>; phy-mode = "rgmii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <2>; + phy-handle = <&phy1>; phy-mode = "rgmii"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts index ca85570629fd..39a92aff0a0d 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts @@ -22,3 +22,8 @@ vmmc-supply = <&vdd_3v3>; vmmc-aux-supply = <&ldo1_reg>; }; + +/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */ +&phy1 { + max-speed = <100>; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 8c66f2efd283..19a60a11c198 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -22,3 +22,8 @@ &mmc1 { vmmc-supply = <&ldo1_reg>; }; + +/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */ +&phy1 { + max-speed = <100>; +}; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 555ae21f2b9a..0d341c545b01 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -14,6 +14,10 @@ rtc1 = &rtc; }; + chosen { + stdout-path = &uart3; + }; + vmain: fixedregulator-vmain { compatible = "regulator-fixed"; regulator-name = "VMAIN"; @@ -303,6 +307,13 @@ gpio-controller; #gpio-cells = <2>; }; + + extcon_usb2: tps659038_usb { + compatible = "ti,palmas-usb-vid"; + ti,enable-vbus-detection; + ti,enable-id-detection; + /* ID & VBUS GPIOs provided in board dts */ + }; }; }; @@ -369,7 +380,7 @@ }; &usb2 { - dr_mode = "otg"; + dr_mode = "peripheral"; }; &mmc2 { diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index a9419f8e17e8..c4eef7323367 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -18,17 +18,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -37,11 +37,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts index aeedc463daa6..db7f3aa38670 100644 --- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts +++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index a1425409e570..702f58c9642d 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 6bd9265f1062..b1a96e95e921 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index c84ab5bf1e18..d67e7aa42b54 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index c3fd6e49212f..8b2fa9a49967 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -16,17 +16,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -35,11 +35,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -173,6 +173,8 @@ }; dsa { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -235,6 +237,48 @@ phy0: ethernet-phy@0 { reg = <0>; }; + + switch: switch@10 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð1>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 99f9de229ea8..4978011df5bd 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index b0520bdeea27..09495e87b038 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -18,17 +18,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -37,11 +37,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index b704bcc597f7..cc011c8bc36b 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index ef45cbeb3e7d..bcdbb8ba1d65 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index f515591e8733..50c5e8417802 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -16,17 +16,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -35,11 +35,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index 5102d19cc8f4..e392f6036f39 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 8f0e508f64ae..df47bf1ea5eb 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -103,8 +103,56 @@ }; }; - mdio { + mdio@72004 { status = "okay"; + + switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; sata@a8000 { @@ -261,6 +309,8 @@ }; dsa@0 { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index ab49acb2d452..28eede180e4f 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -122,7 +122,7 @@ pinctrl-names = "default"; pinctrl-0 = <&ge0_rgmii_pins>; status = "okay"; - phy-mode = "rgmii-id"; + phy-mode = "rgmii"; fixed-link { speed = <1000>; @@ -135,7 +135,7 @@ pinctrl-names = "default"; pinctrl-0 = <&ge1_rgmii_pins>; status = "okay"; - phy-mode = "rgmii-id"; + phy-mode = "rgmii"; fixed-link { speed = <1000>; @@ -273,7 +273,59 @@ /* irq is connected to &pcawan pin 7 */ }; - /* Switch MV88E7176 at address 0x10 */ + /* Switch MV88E6176 at address 0x10 */ + switch@10 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + dsa,member = <0 0>; + + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + ports@0 { + reg = <0>; + label = "lan0"; + }; + + ports@1 { + reg = <1>; + label = "lan1"; + }; + + ports@2 { + reg = <2>; + label = "lan2"; + }; + + ports@3 { + reg = <3>; + label = "lan3"; + }; + + ports@4 { + reg = <4>; + label = "lan4"; + }; + + ports@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð1>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + /* port 6 is connected to eth0 */ + }; + }; }; &pinctrl { diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index 8e67d2c083dd..8e63be33472e 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/armada-388-clearfog-base.dts new file mode 100644 index 000000000000..22ed07fc2979 --- /dev/null +++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts @@ -0,0 +1,109 @@ +/* + * Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828) + * + * Copyright (C) 2015 Russell King + * + * This board is in development; the contents of this file work with + * the A1 rev 2.0 of the board, which does not represent final + * production board. Things will change, don't expect this file to + * remain compatible info the future. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-388-clearfog.dtsi" + +/ { + model = "SolidRun Clearfog Base A1"; + compatible = "solidrun,clearfog-base-a1", + "solidrun,clearfog-a1", "marvell,armada388", + "marvell,armada385", "marvell,armada380"; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&rear_button_pins>; + pinctrl-names = "default"; + + button_0 { + /* The rear SW3 button */ + label = "Rear Button"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = <BTN_0>; + }; + }; +}; + +ð1 { + phy = <&phy1>; +}; + +&gpio0 { + phy1_reset { + gpio-hog; + gpios = <19 GPIO_ACTIVE_LOW>; + output-low; + line-name = "phy1-reset"; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins µsom_phy_clk_pins &clearfog_phy_pins>; + phy1: ethernet-phy@1 { + /* + * Annoyingly, the marvell phy driver configures the LED + * register, rather than preserving reset-loaded setting. + * We undo that rubbish here. + */ + marvell,reg-init = <3 16 0 0x101e>; + reg = <1>; + }; +}; + +&pinctrl { + /* phy1 reset */ + clearfog_phy_pins: clearfog-phy-pins { + marvell,pins = "mpp19"; + marvell,function = "gpio"; + }; + rear_button_pins: rear-button-pins { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-388-clearfog-pro.dts b/arch/arm/boot/dts/armada-388-clearfog-pro.dts new file mode 100644 index 000000000000..bd85870bbdbb --- /dev/null +++ b/arch/arm/boot/dts/armada-388-clearfog-pro.dts @@ -0,0 +1,55 @@ +/* + * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828) + * + * Copyright (C) 2015 Russell King + * + * This board is in development; the contents of this file work with + * the A1 rev 2.0 of the board, which does not represent final + * production board. Things will change, don't expect this file to + * remain compatible info the future. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "armada-388-clearfog.dts" + +/ { + model = "SolidRun Clearfog Pro A1"; + compatible = "solidrun,clearfog-pro-a1", + "solidrun,clearfog-a1", "marvell,armada388", + "marvell,armada385", "marvell,armada380"; +}; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index 71ce201c903e..2745b7416313 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -1,5 +1,5 @@ /* - * Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828) + * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828) * * Copyright (C) 2015 Russell King * @@ -17,17 +17,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,312 +36,33 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -#include "armada-388.dtsi" -#include "armada-38x-solidrun-microsom.dtsi" +#include "armada-388-clearfog.dtsi" / { model = "SolidRun Clearfog A1"; compatible = "solidrun,clearfog-a1", "marvell,armada388", "marvell,armada385", "marvell,armada380"; - aliases { - /* So that mvebu u-boot can update the MAC addresses */ - ethernet1 = ð0; - ethernet2 = ð1; - ethernet3 = ð2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - soc { internal-regs { - ethernet@30000 { - phy-mode = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <2>; - bm,pool-short = <1>; - status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - ethernet@34000 { - phy-mode = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <3>; - bm,pool-short = <1>; - status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - i2c@11000 { - /* Is there anything on this? */ - clock-frequency = <100000>; - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - status = "okay"; - - /* - * PCA9655 GPIO expander, up to 1MHz clock. - * 0-CON3 CLKREQ# - * 1-CON3 PERST# - * 2-CON2 PERST# - * 3-CON3 W_DISABLE - * 4-CON2 CLKREQ# - * 5-USB3 overcurrent - * 6-USB3 power - * 7-CON2 W_DISABLE - * 8-JP4 P1 - * 9-JP4 P4 - * 10-JP4 P5 - * 11-m.2 DEVSLP - * 12-SFP_LOS - * 13-SFP_TX_FAULT - * 14-SFP_TX_DISABLE - * 15-SFP_MOD_DEF0 - */ - expander0: gpio-expander@20 { - /* - * This is how it should be: - * compatible = "onnn,pca9655", - * "nxp,pca9555"; - * but you can't do this because of - * the way I2C works. - */ - compatible = "nxp,pca9555"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x20>; - - pcie1_0_clkreq { - gpio-hog; - gpios = <0 GPIO_ACTIVE_LOW>; - input; - line-name = "pcie1.0-clkreq"; - }; - pcie1_0_w_disable { - gpio-hog; - gpios = <3 GPIO_ACTIVE_LOW>; - output-low; - line-name = "pcie1.0-w-disable"; - }; - pcie2_0_clkreq { - gpio-hog; - gpios = <4 GPIO_ACTIVE_LOW>; - input; - line-name = "pcie2.0-clkreq"; - }; - pcie2_0_w_disable { - gpio-hog; - gpios = <7 GPIO_ACTIVE_LOW>; - output-low; - line-name = "pcie2.0-w-disable"; - }; - usb3_ilimit { - gpio-hog; - gpios = <5 GPIO_ACTIVE_LOW>; - input; - line-name = "usb3-current-limit"; - }; - usb3_power { - gpio-hog; - gpios = <6 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "usb3-power"; - }; - m2_devslp { - gpio-hog; - gpios = <11 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "m.2 devslp"; - }; - sfp_los { - /* SFP loss of signal */ - gpio-hog; - gpios = <12 GPIO_ACTIVE_HIGH>; - input; - line-name = "sfp-los"; - }; - sfp_tx_fault { - /* SFP laser fault */ - gpio-hog; - gpios = <13 GPIO_ACTIVE_HIGH>; - input; - line-name = "sfp-tx-fault"; - }; - sfp_tx_disable { - /* SFP transmit disable */ - gpio-hog; - gpios = <14 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "sfp-tx-disable"; - }; - sfp_mod_def0 { - /* SFP module present */ - gpio-hog; - gpios = <15 GPIO_ACTIVE_LOW>; - input; - line-name = "sfp-mod-def0"; - }; - }; - - /* The MCP3021 is 100kHz clock only */ - mikrobus_adc: mcp3021@4c { - compatible = "microchip,mcp3021"; - reg = <0x4c>; - }; - - /* Also something at 0x64 */ - }; - - i2c@11100 { - /* - * Routed to SFP, mikrobus, and PCIe. - * SFP limits this to 100kHz, and requires - * an AT24C01A/02/04 with address pins tied - * low, which takes addresses 0x50 and 0x51. - * Mikrobus doesn't specify beyond an I2C - * bus being present. - * PCIe uses ARP to assign addresses, or - * 0x63-0x64. - */ - clock-frequency = <100000>; - pinctrl-0 = <&clearfog_i2c1_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - pinctrl@18000 { - clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins { - marvell,pins = "mpp46"; - marvell,function = "ref"; - }; - clearfog_dsa0_pins: clearfog-dsa0-pins { - marvell,pins = "mpp23", "mpp41"; - marvell,function = "gpio"; - }; - clearfog_i2c1_pins: i2c1-pins { - /* SFP, PCIe, mSATA, mikrobus */ - marvell,pins = "mpp26", "mpp27"; - marvell,function = "i2c1"; - }; - clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins { - marvell,pins = "mpp20"; - marvell,function = "gpio"; - }; - clearfog_sdhci_pins: clearfog-sdhci-pins { - marvell,pins = "mpp21", "mpp28", - "mpp37", "mpp38", - "mpp39", "mpp40"; - marvell,function = "sd0"; - }; - clearfog_spi1_cs_pins: spi1-cs-pins { - marvell,pins = "mpp55"; - marvell,function = "spi1"; - }; - mikro_pins: mikro-pins { - /* int: mpp22 rst: mpp29 */ - marvell,pins = "mpp22", "mpp29"; - marvell,function = "gpio"; - }; - mikro_spi_pins: mikro-spi-pins { - marvell,pins = "mpp43"; - marvell,function = "spi1"; - }; - mikro_uart_pins: mikro-uart-pins { - marvell,pins = "mpp24", "mpp25"; - marvell,function = "ua1"; - }; - rear_button_pins: rear-button-pins { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - }; - - sata@a8000 { - /* pinctrl? */ - status = "okay"; - }; - - sata@e0000 { - /* pinctrl? */ - status = "okay"; - }; - - sdhci@d8000 { - bus-width = <4>; - cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - no-1-8-v; - pinctrl-0 = <&clearfog_sdhci_pins - &clearfog_sdhci_cd_pins>; - pinctrl-names = "default"; - status = "okay"; - vmmc = <®_3p3v>; - wp-inverted; - }; - - serial@12100 { - /* mikrobus uart */ - pinctrl-0 = <&mikro_uart_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - usb@58000 { - /* CON3, nearest power. */ - status = "okay"; - }; - usb3@f0000 { /* CON2, nearest CPU, USB2 only. */ status = "okay"; }; - - usb3@f8000 { - /* CON7 */ - status = "okay"; - }; }; pcie-controller { - status = "okay"; - /* - * The two PCIe units are accessible through - * the mini-PCIe connectors on the board. - */ - pcie@2,0 { - /* Port 1, Lane 0. CON3, nearest power. */ - reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>; - status = "okay"; - }; pcie@3,0 { /* Port 2, Lane 0. CON2, nearest CPU. */ reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>; @@ -351,6 +72,8 @@ }; dsa@0 { + status = "disabled"; + compatible = "marvell,dsa"; dsa,ethernet = <ð1>; dsa,mii-bus = <&mdio>; @@ -421,26 +144,136 @@ }; }; -&spi1 { +ð1 { + /* ethernet@30000 */ + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&expander0 { /* - * We don't seem to have the W25Q32 on the - * A1 Rev 2.0 boards, so disable SPI. - * CS0: W25Q32 (doesn't appear to be present) - * CS1: - * CS2: mikrobus + * PCA9655 GPIO expander: + * 0-CON3 CLKREQ# + * 1-CON3 PERST# + * 2-CON2 PERST# + * 3-CON3 W_DISABLE + * 4-CON2 CLKREQ# + * 5-USB3 overcurrent + * 6-USB3 power + * 7-CON2 W_DISABLE + * 8-JP4 P1 + * 9-JP4 P4 + * 10-JP4 P5 + * 11-m.2 DEVSLP + * 12-SFP_LOS + * 13-SFP_TX_FAULT + * 14-SFP_TX_DISABLE + * 15-SFP_MOD_DEF0 */ - pinctrl-0 = <&spi1_pins - &clearfog_spi1_cs_pins - &mikro_spi_pins>; - pinctrl-names = "default"; + pcie2_0_clkreq { + gpio-hog; + gpios = <4 GPIO_ACTIVE_LOW>; + input; + line-name = "pcie2.0-clkreq"; + }; + pcie2_0_w_disable { + gpio-hog; + gpios = <7 GPIO_ACTIVE_LOW>; + output-low; + line-name = "pcie2.0-w-disable"; + }; +}; + +&pinctrl { + clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins { + marvell,pins = "mpp46"; + marvell,function = "ref"; + }; + clearfog_dsa0_pins: clearfog-dsa0-pins { + marvell,pins = "mpp23", "mpp41"; + marvell,function = "gpio"; + }; + clearfog_spi1_cs_pins: spi1-cs-pins { + marvell,pins = "mpp55"; + marvell,function = "spi1"; + }; + rear_button_pins: rear-button-pins { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; +}; + +&mdio { status = "okay"; - spi-flash@0 { + switch@4 { + compatible = "marvell,mv88e6085"; #address-cells = <1>; #size-cells = <0>; - compatible = "w25q32", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <3000000>; - status = "disabled"; + reg = <4>; + pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan5"; + }; + + port@1 { + reg = <1>; + label = "lan4"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan2"; + }; + + port@4 { + reg = <4>; + label = "lan1"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð1>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + /* 88E1512 external phy */ + reg = <6>; + label = "lan6"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; }; }; + +&spi1 { + /* + * Add SPI CS pins for clearfog: + * CS0: W25Q32 (not populated on uSOM) + * CS1: + * CS2: mikrobus + */ + pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>; +}; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi new file mode 100644 index 000000000000..0f5938bede53 --- /dev/null +++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi @@ -0,0 +1,307 @@ +/* + * Device Tree include file for SolidRun Clearfog 88F6828 based boards + * + * Copyright (C) 2015 Russell King + * + * This board is in development; the contents of this file work with + * the A1 rev 2.0 of the board, which does not represent final + * production board. Things will change, don't expect this file to + * remain compatible info the future. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "armada-388.dtsi" +#include "armada-38x-solidrun-microsom.dtsi" + +/ { + aliases { + /* So that mvebu u-boot can update the MAC addresses */ + ethernet1 = ð0; + ethernet2 = ð1; + ethernet3 = ð2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + soc { + internal-regs { + sata@a8000 { + /* pinctrl? */ + status = "okay"; + }; + + sata@e0000 { + /* pinctrl? */ + status = "okay"; + }; + + sdhci@d8000 { + bus-width = <4>; + cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + no-1-8-v; + pinctrl-0 = <µsom_sdhci_pins + &clearfog_sdhci_cd_pins>; + pinctrl-names = "default"; + status = "okay"; + vmmc = <®_3p3v>; + wp-inverted; + }; + + usb@58000 { + /* CON3, nearest power. */ + status = "okay"; + }; + + usb3@f8000 { + /* CON7 */ + status = "okay"; + }; + }; + + pcie-controller { + status = "okay"; + /* + * The two PCIe units are accessible through + * the mini-PCIe connectors on the board. + */ + pcie@2,0 { + /* Port 1, Lane 0. CON3, nearest power. */ + reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + }; + }; +}; + +ð1 { + /* ethernet@30000 */ + bm,pool-long = <2>; + bm,pool-short = <1>; + buffer-manager = <&bm>; + phy-mode = "sgmii"; + status = "okay"; +}; + +ð2 { + /* ethernet@34000 */ + bm,pool-long = <3>; + bm,pool-short = <1>; + buffer-manager = <&bm>; + phy-mode = "sgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&i2c0 { + /* Is there anything on this? */ + clock-frequency = <100000>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* + * PCA9655 GPIO expander, up to 1MHz clock. + * 0-CON3 CLKREQ# + * 1-CON3 PERST# + * 2- + * 3-CON3 W_DISABLE + * 4- + * 5-USB3 overcurrent + * 6-USB3 power + * 7- + * 8-JP4 P1 + * 9-JP4 P4 + * 10-JP4 P5 + * 11-m.2 DEVSLP + * 12-SFP_LOS + * 13-SFP_TX_FAULT + * 14-SFP_TX_DISABLE + * 15-SFP_MOD_DEF0 + */ + expander0: gpio-expander@20 { + /* + * This is how it should be: + * compatible = "onnn,pca9655", "nxp,pca9555"; + * but you can't do this because of the way I2C works. + */ + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + + pcie1_0_clkreq { + gpio-hog; + gpios = <0 GPIO_ACTIVE_LOW>; + input; + line-name = "pcie1.0-clkreq"; + }; + pcie1_0_w_disable { + gpio-hog; + gpios = <3 GPIO_ACTIVE_LOW>; + output-low; + line-name = "pcie1.0-w-disable"; + }; + usb3_ilimit { + gpio-hog; + gpios = <5 GPIO_ACTIVE_LOW>; + input; + line-name = "usb3-current-limit"; + }; + usb3_power { + gpio-hog; + gpios = <6 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb3-power"; + }; + m2_devslp { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "m.2 devslp"; + }; + sfp_los { + /* SFP loss of signal */ + gpio-hog; + gpios = <12 GPIO_ACTIVE_HIGH>; + input; + line-name = "sfp-los"; + }; + sfp_tx_fault { + /* SFP laser fault */ + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + input; + line-name = "sfp-tx-fault"; + }; + sfp_tx_disable { + /* SFP transmit disable */ + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "sfp-tx-disable"; + }; + sfp_mod_def0 { + /* SFP module present */ + gpio-hog; + gpios = <15 GPIO_ACTIVE_LOW>; + input; + line-name = "sfp-mod-def0"; + }; + }; + + /* The MCP3021 is 100kHz clock only */ + mikrobus_adc: mcp3021@4c { + compatible = "microchip,mcp3021"; + reg = <0x4c>; + }; + + /* Also something at 0x64 */ +}; + +&i2c1 { + /* + * Routed to SFP, mikrobus, and PCIe. + * SFP limits this to 100kHz, and requires an AT24C01A/02/04 with + * address pins tied low, which takes addresses 0x50 and 0x51. + * Mikrobus doesn't specify beyond an I2C bus being present. + * PCIe uses ARP to assign addresses, or 0x63-0x64. + */ + clock-frequency = <100000>; + pinctrl-0 = <&clearfog_i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pinctrl { + clearfog_i2c1_pins: i2c1-pins { + /* SFP, PCIe, mSATA, mikrobus */ + marvell,pins = "mpp26", "mpp27"; + marvell,function = "i2c1"; + }; + clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + mikro_pins: mikro-pins { + /* int: mpp22 rst: mpp29 */ + marvell,pins = "mpp22", "mpp29"; + marvell,function = "gpio"; + }; + mikro_spi_pins: mikro-spi-pins { + marvell,pins = "mpp43"; + marvell,function = "spi1"; + }; + mikro_uart_pins: mikro-uart-pins { + marvell,pins = "mpp24", "mpp25"; + marvell,function = "ua1"; + }; +}; + +&spi1 { + /* + * Add SPI CS pins for clearfog: + * CS0: W25Q32 (not populated on uSOM) + * CS1: PIC microcontroller (Pro models) + * CS2: mikrobus + */ + pinctrl-0 = <&spi1_pins &mikro_spi_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart1 { + /* mikrobus uart */ + pinctrl-0 = <&mikro_uart_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index de26c762239c..1ac923826445 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -16,17 +16,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -35,11 +35,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts index dd3462ddb6b9..af82f275eac2 100644 --- a/arch/arm/boot/dts/armada-388-rd.dts +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi index 8c9842237b60..9b508a8161f5 100644 --- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi +++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi @@ -17,17 +17,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -62,45 +62,6 @@ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { - ethernet@70000 { - pinctrl-0 = <&ge0_rgmii_pins>; - pinctrl-names = "default"; - phy = <&phy_dedicated>; - phy-mode = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <0>; - bm,pool-short = <1>; - status = "okay"; - }; - - mdio@72004 { - /* - * Add the phy clock here, so the phy can be - * accessed to read its IDs prior to binding - * with the driver. - */ - pinctrl-0 = <&mdio_pins µsom_phy_clk_pins>; - pinctrl-names = "default"; - - phy_dedicated: ethernet-phy@0 { - /* - * Annoyingly, the marvell phy driver - * configures the LED register, rather - * than preserving reset-loaded setting. - * We undo that rubbish here. - */ - marvell,reg-init = <3 16 0 0x101e>; - reg = <0>; - }; - }; - - pinctrl@18000 { - microsom_phy_clk_pins: microsom-phy-clk-pins { - marvell,pins = "mpp45"; - marvell,function = "ref"; - }; - }; - rtc@a3800 { /* * If the rtc doesn't work, run "date reset" @@ -108,21 +69,78 @@ */ status = "okay"; }; + }; + }; +}; - serial@12000 { - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; - status = "okay"; - }; +&bm { + status = "okay"; +}; - bm@c8000 { - status = "okay"; - }; - }; +&bm_bppi { + status = "okay"; +}; - bm-bppi { - status = "okay"; - }; +ð0 { + /* ethernet@70000 */ + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; + phy = <&phy_dedicated>; + phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; + status = "okay"; +}; + +&mdio { + /* + * Add the phy clock here, so the phy can be accessed to read its + * IDs prior to binding with the driver. + */ + pinctrl-0 = <&mdio_pins µsom_phy_clk_pins>; + pinctrl-names = "default"; + + phy_dedicated: ethernet-phy@0 { + /* + * Annoyingly, the marvell phy driver configures the LED + * register, rather than preserving reset-loaded setting. + * We undo that rubbish here. + */ + marvell,reg-init = <3 16 0 0x101e>; + reg = <0>; + }; +}; + +&pinctrl { + microsom_phy_clk_pins: microsom-phy-clk-pins { + marvell,pins = "mpp45"; + marvell,function = "ref"; + }; + /* Optional eMMC */ + microsom_sdhci_pins: microsom-sdhci-pins { + marvell,pins = "mpp21", "mpp28", "mpp37", + "mpp38", "mpp39", "mpp40"; + marvell,function = "sd0"; + }; +}; + +&spi1 { + /* The microsom has an optional W25Q32 on board, connected to CS0 */ + pinctrl-0 = <&spi1_pins>; + w25q32: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q32", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <3000000>; + status = "disabled"; }; }; + +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 7450e9fea45d..79b767507eab 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts index 34e279d973c8..2afed2ce4741 100644 --- a/arch/arm/boot/dts/armada-390-db.dts +++ b/arch/arm/boot/dts/armada-390-db.dts @@ -16,17 +16,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -35,11 +35,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/armada-390.dtsi index 6cd18d8aaac7..0d8a54ad007c 100644 --- a/arch/arm/boot/dts/armada-390.dtsi +++ b/arch/arm/boot/dts/armada-390.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-395.dtsi b/arch/arm/boot/dts/armada-395.dtsi index ab5dc49f2bff..bf7e4335e36a 100644 --- a/arch/arm/boot/dts/armada-395.dtsi +++ b/arch/arm/boot/dts/armada-395.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts index 268c8349c884..e8604281c3c9 100644 --- a/arch/arm/boot/dts/armada-398-db.dts +++ b/arch/arm/boot/dts/armada-398-db.dts @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-398.dtsi b/arch/arm/boot/dts/armada-398.dtsi index 234a99891a29..1f4e113fc821 100644 --- a/arch/arm/boot/dts/armada-398.dtsi +++ b/arch/arm/boot/dts/armada-398.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index de171baffcf6..60fbfd5907c7 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi new file mode 100644 index 000000000000..f6a03dcee5ef --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -0,0 +1,254 @@ +/* + * Device Tree Include file for Marvell 98dx3236 family SoC + * + * Copyright (C) 2016 Allied Telesis Labs + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Contains definitions specific to the 98dx3236 SoC that are not + * common to all Armada XP SoCs. + */ + +#include "armada-xp.dtsi" + +/ { + model = "Marvell 98DX3236 SoC"; + compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp"; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "marvell,98dx3236-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <0>; + clocks = <&cpuclk 0>; + clock-latency = <1000000>; + }; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 + MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000 + MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>; + + /* + * 98DX3236 has 1 x1 PCIe unit Gen2.0 + */ + pciec: pcie-controller@82000000 { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + msi-parent = <&mpic>; + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>; + + pcie1: pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + }; + + internal-regs { + coreclk: mvebu-sar@18230 { + compatible = "marvell,mv98dx3236-core-clock"; + }; + + cpuclk: clock-complex@18700 { + compatible = "marvell,mv98dx3236-cpu-clock"; + }; + + corediv-clock@18740 { + status = "disabled"; + }; + + xor@60900 { + status = "disabled"; + }; + + crypto@90000 { + status = "disabled"; + }; + + xor@f0900 { + status = "disabled"; + }; + + xor@f0800 { + compatible = "marvell,orion-xor"; + reg = <0xf0800 0x100 + 0xf0a00 0x100>; + clocks = <&gateclk 22>; + status = "okay"; + + xor10 { + interrupts = <51>; + dmacap,memcpy; + dmacap,xor; + }; + xor11 { + interrupts = <52>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; + + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; + + /* does not exist */ + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; + reg = <0x18140 0x40>; + status = "disabled"; + }; + + gpio2: gpio@18180 { /* rework some properties */ + compatible = "marvell,orion-gpio"; + reg = <0x18180 0x40>; + ngpios = <1>; /* only gpio #32 */ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <87>; + }; + + nand: nand@d0000 { + clocks = <&dfx_coredivclk 0>; + }; + }; + + dfxr: dfx-registers@ac000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>; + + dfx_coredivclk: corediv-clock@f8268 { + compatible = "marvell,mv98dx3236-corediv-clock"; + reg = <0xf8268 0xc>; + #clock-cells = <1>; + clocks = <&mainpll>; + clock-output-names = "nand"; + }; + + dfx: dfx@0 { + compatible = "marvell,dfx-server"; + reg = <0 0x100000>; + }; + }; + + switch: switch@a8000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>; + + pp0: packet-processor@0 { + compatible = "marvell,prestera-98dx3236"; + reg = <0 0x4000000>; + interrupts = <33>, <34>, <35>; + dfx = <&dfx>; + }; + }; + }; +}; + +&pinctrl { + compatible = "marvell,98dx3236-pinctrl"; + + spi0_pins: spi0-pins { + marvell,pins = "mpp0", "mpp1", + "mpp2", "mpp3"; + marvell,function = "spi0"; + }; +}; + +&sdio { + status = "disabled"; +}; + +&crypto_sram0 { + status = "disabled"; +}; + +&crypto_sram1 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi new file mode 100644 index 000000000000..e1580afdc260 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi @@ -0,0 +1,76 @@ +/* + * Device Tree Include file for Marvell 98dx3336 family SoC + * + * Copyright (C) 2016 Allied Telesis Labs + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Contains definitions specific to the 98dx3236 SoC that are not + * common to all Armada XP SoCs. + */ + +#include "armada-xp-98dx3236.dtsi" + +/ { + model = "Marvell 98DX3336 SoC"; + compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp"; + + cpus { + cpu@1 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <1>; + clocks = <&cpuclk 1>; + clock-latency = <1000000>; + }; + }; + + soc { + internal-regs { + resume@20980 { + compatible = "marvell,98dx3336-resume-ctrl"; + reg = <0x20980 0x10>; + }; + }; + }; +}; + +&pp0 { + compatible = "marvell,prestera-98dx3336"; +}; diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi new file mode 100644 index 000000000000..b9d9b269efb4 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi @@ -0,0 +1,90 @@ +/* + * Device Tree Include file for Marvell 98dx4521 family SoC + * + * Copyright (C) 2016 Allied Telesis Labs + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Contains definitions specific to the 98dx4521 SoC that are not + * common to all Armada XP SoCs. + */ + +#include "armada-xp-98dx3236.dtsi" + +/ { + model = "Marvell 98DX4251 SoC"; + compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp"; + + cpus { + cpu@1 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <1>; + clocks = <&cpuclk 1>; + clock-latency = <1000000>; + }; + }; + + soc { + internal-regs { + resume@20980 { + compatible = "marvell,98dx3336-resume-ctrl"; + reg = <0x20980 0x10>; + }; + }; + }; +}; + +&sdio { + status = "okay"; +}; + +&pinctrl { + compatible = "marvell,98dx4251-pinctrl"; + + sdio_pins: sdio-pins { + marvell,pins = "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10"; + marvell,function = "sd0"; + }; +}; + +&pp0 { + compatible = "marvell,prestera-98dx4251"; +}; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index 1e1fc4fccbad..d0c6a01f48a6 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -20,17 +20,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -39,11 +39,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts new file mode 100644 index 000000000000..a8130805074e --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts @@ -0,0 +1,151 @@ +/* + * Device Tree file for DB-DXBC2 board + * + * Copyright (C) 2016 Allied Telesis Labs + * + * Based on armada-xp-db.dts + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. + */ + +/dts-v1/; +#include "armada-xp-98dx4251.dtsi" + +/ { + model = "Marvell Bobcat2 Evaluation Board"; + compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */ + }; + +}; + +&devbus_bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <16>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&nand { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; +}; + +&sdio { + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + broken-cd; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p64"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x00100000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x00100000 0x00040000>; + label = "u-boot-env"; + }; + partition@unused { + reg = <0x00140000 0x00ec0000>; + label = "unused"; + }; + + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts new file mode 100644 index 000000000000..4e07cb6ed800 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts @@ -0,0 +1,142 @@ +/* + * Device Tree file for DB-XC3-24G4XG board + * + * Copyright (C) 2016 Allied Telesis Labs + * + * Based on armada-xp-db.dts + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. + */ + +/dts-v1/; +#include "armada-xp-98dx3336.dtsi" + +/ { + model = "DB-XC3-24G4XG"; + compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x40000000>; /* 1 GB */ + }; +}; + +&devbus_bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <16>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; +}; + +&nand { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p64"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x00100000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x00100000 0x00040000>; + label = "u-boot-env"; + }; + partition@unused { + reg = <0x00140000 0x00ec0000>; + label = "unused"; + }; + + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 44a724d39dbe..a33974254d8c 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -18,17 +18,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -37,11 +37,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 72cb8fa377e3..d62bf7bea1df 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -18,17 +18,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -37,11 +37,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index d848ae9007db..ce0afba1ce58 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index 83ac884c0f8a..42ea8764814c 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -302,6 +302,8 @@ }; dsa { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -398,3 +400,54 @@ spi-max-frequency = <40000000>; }; }; + +&mdio { + status = "okay"; + + switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "internet"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts index 16277380e714..977f6b3fc1f8 100644 --- a/arch/arm/boot/dts/armada-xp-matrix.dts +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 05c164b5786d..07c5090ecd29 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 07894b0d3e59..64e936ae7b22 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 775bee53ce86..d1383dde43eb 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index a2f0e789465d..40c6fe21e720 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index b577c9fb03a4..66b78131a038 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index e803da03146a..d8e05bab0cee 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 5274e4ff5d62..fa1e881266ac 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -18,17 +18,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -37,11 +37,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index 1b7a5ff0e533..d967603dade8 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -23,3 +23,17 @@ &uart5 { status = "okay"; }; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index cc5fcf2940bf..1d2fc1e1dc29 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -12,14 +12,34 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,38400 earlyprintk"; + bootargs = "console=ttyS4,115200 earlyprintk"; }; memory { - reg = <0x40000000 0x10000000>; + reg = <0x40000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@5f000000 { + no-map; + reg = <0x5f000000 0x01000000>; /* 16M */ + }; }; }; &uart5 { status = "okay"; }; + +&mac0 { + status = "okay"; + + use-ncsi; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts new file mode 100644 index 000000000000..7a3b2b50c884 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -0,0 +1,45 @@ +/dts-v1/; + +#include "aspeed-g5.dtsi" + +/ { + model = "Romulus BMC"; + compatible = "ibm,romulus-bmc", "aspeed,ast2500"; + + aliases { + serial4 = &uart5; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory { + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@bf000000 { + no-map; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; + }; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + use-ncsi; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; +}; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 22dee5937d5c..0b4932cc02a8 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -41,6 +41,22 @@ reg = <0x1e6c0080 0x80>; }; + mac0: ethernet@1e660000 { + compatible = "faraday,ftgmac100"; + reg = <0x1e660000 0x180>; + interrupts = <2>; + no-hw-checksum; + status = "disabled"; + }; + + mac1: ethernet@1e680000 { + compatible = "faraday,ftgmac100"; + reg = <0x1e680000 0x180>; + interrupts = <3>; + no-hw-checksum; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -54,6 +70,756 @@ clocks = <&clk_clkin>; }; + syscon: syscon@1e6e2000 { + compatible = "aspeed,g4-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + + pinctrl: pinctrl { + compatible = "aspeed,g4-pinctrl"; + + pinctrl_acpi_default: acpi_default { + function = "ACPI"; + groups = "ACPI"; + }; + + pinctrl_adc0_default: adc0_default { + function = "ADC0"; + groups = "ADC0"; + }; + + pinctrl_adc1_default: adc1_default { + function = "ADC1"; + groups = "ADC1"; + }; + + pinctrl_adc10_default: adc10_default { + function = "ADC10"; + groups = "ADC10"; + }; + + pinctrl_adc11_default: adc11_default { + function = "ADC11"; + groups = "ADC11"; + }; + + pinctrl_adc12_default: adc12_default { + function = "ADC12"; + groups = "ADC12"; + }; + + pinctrl_adc13_default: adc13_default { + function = "ADC13"; + groups = "ADC13"; + }; + + pinctrl_adc14_default: adc14_default { + function = "ADC14"; + groups = "ADC14"; + }; + + pinctrl_adc15_default: adc15_default { + function = "ADC15"; + groups = "ADC15"; + }; + + pinctrl_adc2_default: adc2_default { + function = "ADC2"; + groups = "ADC2"; + }; + + pinctrl_adc3_default: adc3_default { + function = "ADC3"; + groups = "ADC3"; + }; + + pinctrl_adc4_default: adc4_default { + function = "ADC4"; + groups = "ADC4"; + }; + + pinctrl_adc5_default: adc5_default { + function = "ADC5"; + groups = "ADC5"; + }; + + pinctrl_adc6_default: adc6_default { + function = "ADC6"; + groups = "ADC6"; + }; + + pinctrl_adc7_default: adc7_default { + function = "ADC7"; + groups = "ADC7"; + }; + + pinctrl_adc8_default: adc8_default { + function = "ADC8"; + groups = "ADC8"; + }; + + pinctrl_adc9_default: adc9_default { + function = "ADC9"; + groups = "ADC9"; + }; + + pinctrl_bmcint_default: bmcint_default { + function = "BMCINT"; + groups = "BMCINT"; + }; + + pinctrl_ddcclk_default: ddcclk_default { + function = "DDCCLK"; + groups = "DDCCLK"; + }; + + pinctrl_ddcdat_default: ddcdat_default { + function = "DDCDAT"; + groups = "DDCDAT"; + }; + + pinctrl_extrst_default: extrst_default { + function = "EXTRST"; + groups = "EXTRST"; + }; + + pinctrl_flack_default: flack_default { + function = "FLACK"; + groups = "FLACK"; + }; + + pinctrl_flbusy_default: flbusy_default { + function = "FLBUSY"; + groups = "FLBUSY"; + }; + + pinctrl_flwp_default: flwp_default { + function = "FLWP"; + groups = "FLWP"; + }; + + pinctrl_gpid_default: gpid_default { + function = "GPID"; + groups = "GPID"; + }; + + pinctrl_gpid0_default: gpid0_default { + function = "GPID0"; + groups = "GPID0"; + }; + + pinctrl_gpid2_default: gpid2_default { + function = "GPID2"; + groups = "GPID2"; + }; + + pinctrl_gpid4_default: gpid4_default { + function = "GPID4"; + groups = "GPID4"; + }; + + pinctrl_gpid6_default: gpid6_default { + function = "GPID6"; + groups = "GPID6"; + }; + + pinctrl_gpie0_default: gpie0_default { + function = "GPIE0"; + groups = "GPIE0"; + }; + + pinctrl_gpie2_default: gpie2_default { + function = "GPIE2"; + groups = "GPIE2"; + }; + + pinctrl_gpie4_default: gpie4_default { + function = "GPIE4"; + groups = "GPIE4"; + }; + + pinctrl_gpie6_default: gpie6_default { + function = "GPIE6"; + groups = "GPIE6"; + }; + + pinctrl_i2c10_default: i2c10_default { + function = "I2C10"; + groups = "I2C10"; + }; + + pinctrl_i2c11_default: i2c11_default { + function = "I2C11"; + groups = "I2C11"; + }; + + pinctrl_i2c12_default: i2c12_default { + function = "I2C12"; + groups = "I2C12"; + }; + + pinctrl_i2c13_default: i2c13_default { + function = "I2C13"; + groups = "I2C13"; + }; + + pinctrl_i2c14_default: i2c14_default { + function = "I2C14"; + groups = "I2C14"; + }; + + pinctrl_i2c3_default: i2c3_default { + function = "I2C3"; + groups = "I2C3"; + }; + + pinctrl_i2c4_default: i2c4_default { + function = "I2C4"; + groups = "I2C4"; + }; + + pinctrl_i2c5_default: i2c5_default { + function = "I2C5"; + groups = "I2C5"; + }; + + pinctrl_i2c6_default: i2c6_default { + function = "I2C6"; + groups = "I2C6"; + }; + + pinctrl_i2c7_default: i2c7_default { + function = "I2C7"; + groups = "I2C7"; + }; + + pinctrl_i2c8_default: i2c8_default { + function = "I2C8"; + groups = "I2C8"; + }; + + pinctrl_i2c9_default: i2c9_default { + function = "I2C9"; + groups = "I2C9"; + }; + + pinctrl_lpcpd_default: lpcpd_default { + function = "LPCPD"; + groups = "LPCPD"; + }; + + pinctrl_lpcpme_default: lpcpme_default { + function = "LPCPME"; + groups = "LPCPME"; + }; + + pinctrl_lpcrst_default: lpcrst_default { + function = "LPCRST"; + groups = "LPCRST"; + }; + + pinctrl_lpcsmi_default: lpcsmi_default { + function = "LPCSMI"; + groups = "LPCSMI"; + }; + + pinctrl_mac1link_default: mac1link_default { + function = "MAC1LINK"; + groups = "MAC1LINK"; + }; + + pinctrl_mac2link_default: mac2link_default { + function = "MAC2LINK"; + groups = "MAC2LINK"; + }; + + pinctrl_mdio1_default: mdio1_default { + function = "MDIO1"; + groups = "MDIO1"; + }; + + pinctrl_mdio2_default: mdio2_default { + function = "MDIO2"; + groups = "MDIO2"; + }; + + pinctrl_ncts1_default: ncts1_default { + function = "NCTS1"; + groups = "NCTS1"; + }; + + pinctrl_ncts2_default: ncts2_default { + function = "NCTS2"; + groups = "NCTS2"; + }; + + pinctrl_ncts3_default: ncts3_default { + function = "NCTS3"; + groups = "NCTS3"; + }; + + pinctrl_ncts4_default: ncts4_default { + function = "NCTS4"; + groups = "NCTS4"; + }; + + pinctrl_ndcd1_default: ndcd1_default { + function = "NDCD1"; + groups = "NDCD1"; + }; + + pinctrl_ndcd2_default: ndcd2_default { + function = "NDCD2"; + groups = "NDCD2"; + }; + + pinctrl_ndcd3_default: ndcd3_default { + function = "NDCD3"; + groups = "NDCD3"; + }; + + pinctrl_ndcd4_default: ndcd4_default { + function = "NDCD4"; + groups = "NDCD4"; + }; + + pinctrl_ndsr1_default: ndsr1_default { + function = "NDSR1"; + groups = "NDSR1"; + }; + + pinctrl_ndsr2_default: ndsr2_default { + function = "NDSR2"; + groups = "NDSR2"; + }; + + pinctrl_ndsr3_default: ndsr3_default { + function = "NDSR3"; + groups = "NDSR3"; + }; + + pinctrl_ndsr4_default: ndsr4_default { + function = "NDSR4"; + groups = "NDSR4"; + }; + + pinctrl_ndtr1_default: ndtr1_default { + function = "NDTR1"; + groups = "NDTR1"; + }; + + pinctrl_ndtr2_default: ndtr2_default { + function = "NDTR2"; + groups = "NDTR2"; + }; + + pinctrl_ndtr3_default: ndtr3_default { + function = "NDTR3"; + groups = "NDTR3"; + }; + + pinctrl_ndtr4_default: ndtr4_default { + function = "NDTR4"; + groups = "NDTR4"; + }; + + pinctrl_ndts4_default: ndts4_default { + function = "NDTS4"; + groups = "NDTS4"; + }; + + pinctrl_nri1_default: nri1_default { + function = "NRI1"; + groups = "NRI1"; + }; + + pinctrl_nri2_default: nri2_default { + function = "NRI2"; + groups = "NRI2"; + }; + + pinctrl_nri3_default: nri3_default { + function = "NRI3"; + groups = "NRI3"; + }; + + pinctrl_nri4_default: nri4_default { + function = "NRI4"; + groups = "NRI4"; + }; + + pinctrl_nrts1_default: nrts1_default { + function = "NRTS1"; + groups = "NRTS1"; + }; + + pinctrl_nrts2_default: nrts2_default { + function = "NRTS2"; + groups = "NRTS2"; + }; + + pinctrl_nrts3_default: nrts3_default { + function = "NRTS3"; + groups = "NRTS3"; + }; + + pinctrl_oscclk_default: oscclk_default { + function = "OSCCLK"; + groups = "OSCCLK"; + }; + + pinctrl_pwm0_default: pwm0_default { + function = "PWM0"; + groups = "PWM0"; + }; + + pinctrl_pwm1_default: pwm1_default { + function = "PWM1"; + groups = "PWM1"; + }; + + pinctrl_pwm2_default: pwm2_default { + function = "PWM2"; + groups = "PWM2"; + }; + + pinctrl_pwm3_default: pwm3_default { + function = "PWM3"; + groups = "PWM3"; + }; + + pinctrl_pwm4_default: pwm4_default { + function = "PWM4"; + groups = "PWM4"; + }; + + pinctrl_pwm5_default: pwm5_default { + function = "PWM5"; + groups = "PWM5"; + }; + + pinctrl_pwm6_default: pwm6_default { + function = "PWM6"; + groups = "PWM6"; + }; + + pinctrl_pwm7_default: pwm7_default { + function = "PWM7"; + groups = "PWM7"; + }; + + pinctrl_rgmii1_default: rgmii1_default { + function = "RGMII1"; + groups = "RGMII1"; + }; + + pinctrl_rgmii2_default: rgmii2_default { + function = "RGMII2"; + groups = "RGMII2"; + }; + + pinctrl_rmii1_default: rmii1_default { + function = "RMII1"; + groups = "RMII1"; + }; + + pinctrl_rmii2_default: rmii2_default { + function = "RMII2"; + groups = "RMII2"; + }; + + pinctrl_rom16_default: rom16_default { + function = "ROM16"; + groups = "ROM16"; + }; + + pinctrl_rom8_default: rom8_default { + function = "ROM8"; + groups = "ROM8"; + }; + + pinctrl_romcs1_default: romcs1_default { + function = "ROMCS1"; + groups = "ROMCS1"; + }; + + pinctrl_romcs2_default: romcs2_default { + function = "ROMCS2"; + groups = "ROMCS2"; + }; + + pinctrl_romcs3_default: romcs3_default { + function = "ROMCS3"; + groups = "ROMCS3"; + }; + + pinctrl_romcs4_default: romcs4_default { + function = "ROMCS4"; + groups = "ROMCS4"; + }; + + pinctrl_rxd1_default: rxd1_default { + function = "RXD1"; + groups = "RXD1"; + }; + + pinctrl_rxd2_default: rxd2_default { + function = "RXD2"; + groups = "RXD2"; + }; + + pinctrl_rxd3_default: rxd3_default { + function = "RXD3"; + groups = "RXD3"; + }; + + pinctrl_rxd4_default: rxd4_default { + function = "RXD4"; + groups = "RXD4"; + }; + + pinctrl_salt1_default: salt1_default { + function = "SALT1"; + groups = "SALT1"; + }; + + pinctrl_salt2_default: salt2_default { + function = "SALT2"; + groups = "SALT2"; + }; + + pinctrl_salt3_default: salt3_default { + function = "SALT3"; + groups = "SALT3"; + }; + + pinctrl_salt4_default: salt4_default { + function = "SALT4"; + groups = "SALT4"; + }; + + pinctrl_sd1_default: sd1_default { + function = "SD1"; + groups = "SD1"; + }; + + pinctrl_sd2_default: sd2_default { + function = "SD2"; + groups = "SD2"; + }; + + pinctrl_sgpmck_default: sgpmck_default { + function = "SGPMCK"; + groups = "SGPMCK"; + }; + + pinctrl_sgpmi_default: sgpmi_default { + function = "SGPMI"; + groups = "SGPMI"; + }; + + pinctrl_sgpmld_default: sgpmld_default { + function = "SGPMLD"; + groups = "SGPMLD"; + }; + + pinctrl_sgpmo_default: sgpmo_default { + function = "SGPMO"; + groups = "SGPMO"; + }; + + pinctrl_sgpsck_default: sgpsck_default { + function = "SGPSCK"; + groups = "SGPSCK"; + }; + + pinctrl_sgpsi0_default: sgpsi0_default { + function = "SGPSI0"; + groups = "SGPSI0"; + }; + + pinctrl_sgpsi1_default: sgpsi1_default { + function = "SGPSI1"; + groups = "SGPSI1"; + }; + + pinctrl_sgpsld_default: sgpsld_default { + function = "SGPSLD"; + groups = "SGPSLD"; + }; + + pinctrl_sioonctrl_default: sioonctrl_default { + function = "SIOONCTRL"; + groups = "SIOONCTRL"; + }; + + pinctrl_siopbi_default: siopbi_default { + function = "SIOPBI"; + groups = "SIOPBI"; + }; + + pinctrl_siopbo_default: siopbo_default { + function = "SIOPBO"; + groups = "SIOPBO"; + }; + + pinctrl_siopwreq_default: siopwreq_default { + function = "SIOPWREQ"; + groups = "SIOPWREQ"; + }; + + pinctrl_siopwrgd_default: siopwrgd_default { + function = "SIOPWRGD"; + groups = "SIOPWRGD"; + }; + + pinctrl_sios3_default: sios3_default { + function = "SIOS3"; + groups = "SIOS3"; + }; + + pinctrl_sios5_default: sios5_default { + function = "SIOS5"; + groups = "SIOS5"; + }; + + pinctrl_siosci_default: siosci_default { + function = "SIOSCI"; + groups = "SIOSCI"; + }; + + pinctrl_spi1_default: spi1_default { + function = "SPI1"; + groups = "SPI1"; + }; + + pinctrl_spi1debug_default: spi1debug_default { + function = "SPI1DEBUG"; + groups = "SPI1DEBUG"; + }; + + pinctrl_spi1passthru_default: spi1passthru_default { + function = "SPI1PASSTHRU"; + groups = "SPI1PASSTHRU"; + }; + + pinctrl_spics1_default: spics1_default { + function = "SPICS1"; + groups = "SPICS1"; + }; + + pinctrl_timer3_default: timer3_default { + function = "TIMER3"; + groups = "TIMER3"; + }; + + pinctrl_timer4_default: timer4_default { + function = "TIMER4"; + groups = "TIMER4"; + }; + + pinctrl_timer5_default: timer5_default { + function = "TIMER5"; + groups = "TIMER5"; + }; + + pinctrl_timer6_default: timer6_default { + function = "TIMER6"; + groups = "TIMER6"; + }; + + pinctrl_timer7_default: timer7_default { + function = "TIMER7"; + groups = "TIMER7"; + }; + + pinctrl_timer8_default: timer8_default { + function = "TIMER8"; + groups = "TIMER8"; + }; + + pinctrl_txd1_default: txd1_default { + function = "TXD1"; + groups = "TXD1"; + }; + + pinctrl_txd2_default: txd2_default { + function = "TXD2"; + groups = "TXD2"; + }; + + pinctrl_txd3_default: txd3_default { + function = "TXD3"; + groups = "TXD3"; + }; + + pinctrl_txd4_default: txd4_default { + function = "TXD4"; + groups = "TXD4"; + }; + + pinctrl_uart6_default: uart6_default { + function = "UART6"; + groups = "UART6"; + }; + + pinctrl_usbcki_default: usbcki_default { + function = "USBCKI"; + groups = "USBCKI"; + }; + + pinctrl_vgabios_rom_default: vgabios_rom_default { + function = "VGABIOS_ROM"; + groups = "VGABIOS_ROM"; + }; + + pinctrl_vgahs_default: vgahs_default { + function = "VGAHS"; + groups = "VGAHS"; + }; + + pinctrl_vgavs_default: vgavs_default { + function = "VGAVS"; + groups = "VGAVS"; + }; + + pinctrl_vpi18_default: vpi18_default { + function = "VPI18"; + groups = "VPI18"; + }; + + pinctrl_vpi24_default: vpi24_default { + function = "VPI24"; + groups = "VPI24"; + }; + + pinctrl_vpi30_default: vpi30_default { + function = "VPI30"; + groups = "VPI30"; + }; + + pinctrl_vpo12_default: vpo12_default { + function = "VPO12"; + groups = "VPO12"; + }; + + pinctrl_vpo24_default: vpo24_default { + function = "VPO24"; + groups = "VPO24"; + }; + + pinctrl_wdtrst1_default: wdtrst1_default { + function = "WDTRST1"; + groups = "WDTRST1"; + }; + + pinctrl_wdtrst2_default: wdtrst2_default { + function = "WDTRST2"; + groups = "WDTRST2"; + }; + + }; + }; + clk_apb: clk_apb@1e6e2008 { #clock-cells = <0>; compatible = "aspeed,g4-apb-clock"; @@ -72,6 +838,16 @@ reg = <0x1e720000 0x8000>; // 32K }; + gpio: gpio@1e780000 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2400-gpio"; + reg = <0x1e780000 0x1000>; + interrupts = <20>; + gpio-ranges = <&pinctrl 0 0 220>; + interrupt-controller; + }; + timer: timer@1e782000 { compatible = "aspeed,ast2400-timer"; reg = <0x1e782000 0x90>; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index dd94d9361fda..b664fe380936 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -32,6 +32,22 @@ reg = <0x1e6c0080 0x80>; }; + mac0: ethernet@1e660000 { + compatible = "faraday,ftgmac100"; + reg = <0x1e660000 0x180>; + interrupts = <2>; + no-hw-checksum; + status = "disabled"; + }; + + mac1: ethernet@1e680000 { + compatible = "faraday,ftgmac100"; + reg = <0x1e680000 0x180>; + interrupts = <3>; + no-hw-checksum; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -44,6 +60,822 @@ reg = <0x1e6e2070 0x04>; }; + syscon: syscon@1e6e2000 { + compatible = "aspeed,g5-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + + pinctrl: pinctrl { + compatible = "aspeed,g5-pinctrl"; + aspeed,external-nodes = <&gfx &lhc>; + + pinctrl_acpi_default: acpi_default { + function = "ACPI"; + groups = "ACPI"; + }; + + pinctrl_adc0_default: adc0_default { + function = "ADC0"; + groups = "ADC0"; + }; + + pinctrl_adc1_default: adc1_default { + function = "ADC1"; + groups = "ADC1"; + }; + + pinctrl_adc10_default: adc10_default { + function = "ADC10"; + groups = "ADC10"; + }; + + pinctrl_adc11_default: adc11_default { + function = "ADC11"; + groups = "ADC11"; + }; + + pinctrl_adc12_default: adc12_default { + function = "ADC12"; + groups = "ADC12"; + }; + + pinctrl_adc13_default: adc13_default { + function = "ADC13"; + groups = "ADC13"; + }; + + pinctrl_adc14_default: adc14_default { + function = "ADC14"; + groups = "ADC14"; + }; + + pinctrl_adc15_default: adc15_default { + function = "ADC15"; + groups = "ADC15"; + }; + + pinctrl_adc2_default: adc2_default { + function = "ADC2"; + groups = "ADC2"; + }; + + pinctrl_adc3_default: adc3_default { + function = "ADC3"; + groups = "ADC3"; + }; + + pinctrl_adc4_default: adc4_default { + function = "ADC4"; + groups = "ADC4"; + }; + + pinctrl_adc5_default: adc5_default { + function = "ADC5"; + groups = "ADC5"; + }; + + pinctrl_adc6_default: adc6_default { + function = "ADC6"; + groups = "ADC6"; + }; + + pinctrl_adc7_default: adc7_default { + function = "ADC7"; + groups = "ADC7"; + }; + + pinctrl_adc8_default: adc8_default { + function = "ADC8"; + groups = "ADC8"; + }; + + pinctrl_adc9_default: adc9_default { + function = "ADC9"; + groups = "ADC9"; + }; + + pinctrl_bmcint_default: bmcint_default { + function = "BMCINT"; + groups = "BMCINT"; + }; + + pinctrl_ddcclk_default: ddcclk_default { + function = "DDCCLK"; + groups = "DDCCLK"; + }; + + pinctrl_ddcdat_default: ddcdat_default { + function = "DDCDAT"; + groups = "DDCDAT"; + }; + + pinctrl_espi_default: espi_default { + function = "ESPI"; + groups = "ESPI"; + }; + + pinctrl_fwspics1_default: fwspics1_default { + function = "FWSPICS1"; + groups = "FWSPICS1"; + }; + + pinctrl_fwspics2_default: fwspics2_default { + function = "FWSPICS2"; + groups = "FWSPICS2"; + }; + + pinctrl_gpid0_default: gpid0_default { + function = "GPID0"; + groups = "GPID0"; + }; + + pinctrl_gpid2_default: gpid2_default { + function = "GPID2"; + groups = "GPID2"; + }; + + pinctrl_gpid4_default: gpid4_default { + function = "GPID4"; + groups = "GPID4"; + }; + + pinctrl_gpid6_default: gpid6_default { + function = "GPID6"; + groups = "GPID6"; + }; + + pinctrl_gpie0_default: gpie0_default { + function = "GPIE0"; + groups = "GPIE0"; + }; + + pinctrl_gpie2_default: gpie2_default { + function = "GPIE2"; + groups = "GPIE2"; + }; + + pinctrl_gpie4_default: gpie4_default { + function = "GPIE4"; + groups = "GPIE4"; + }; + + pinctrl_gpie6_default: gpie6_default { + function = "GPIE6"; + groups = "GPIE6"; + }; + + pinctrl_i2c10_default: i2c10_default { + function = "I2C10"; + groups = "I2C10"; + }; + + pinctrl_i2c11_default: i2c11_default { + function = "I2C11"; + groups = "I2C11"; + }; + + pinctrl_i2c12_default: i2c12_default { + function = "I2C12"; + groups = "I2C12"; + }; + + pinctrl_i2c13_default: i2c13_default { + function = "I2C13"; + groups = "I2C13"; + }; + + pinctrl_i2c14_default: i2c14_default { + function = "I2C14"; + groups = "I2C14"; + }; + + pinctrl_i2c3_default: i2c3_default { + function = "I2C3"; + groups = "I2C3"; + }; + + pinctrl_i2c4_default: i2c4_default { + function = "I2C4"; + groups = "I2C4"; + }; + + pinctrl_i2c5_default: i2c5_default { + function = "I2C5"; + groups = "I2C5"; + }; + + pinctrl_i2c6_default: i2c6_default { + function = "I2C6"; + groups = "I2C6"; + }; + + pinctrl_i2c7_default: i2c7_default { + function = "I2C7"; + groups = "I2C7"; + }; + + pinctrl_i2c8_default: i2c8_default { + function = "I2C8"; + groups = "I2C8"; + }; + + pinctrl_i2c9_default: i2c9_default { + function = "I2C9"; + groups = "I2C9"; + }; + + pinctrl_lad0_default: lad0_default { + function = "LAD0"; + groups = "LAD0"; + }; + + pinctrl_lad1_default: lad1_default { + function = "LAD1"; + groups = "LAD1"; + }; + + pinctrl_lad2_default: lad2_default { + function = "LAD2"; + groups = "LAD2"; + }; + + pinctrl_lad3_default: lad3_default { + function = "LAD3"; + groups = "LAD3"; + }; + + pinctrl_lclk_default: lclk_default { + function = "LCLK"; + groups = "LCLK"; + }; + + pinctrl_lframe_default: lframe_default { + function = "LFRAME"; + groups = "LFRAME"; + }; + + pinctrl_lpchc_default: lpchc_default { + function = "LPCHC"; + groups = "LPCHC"; + }; + + pinctrl_lpcpd_default: lpcpd_default { + function = "LPCPD"; + groups = "LPCPD"; + }; + + pinctrl_lpcplus_default: lpcplus_default { + function = "LPCPLUS"; + groups = "LPCPLUS"; + }; + + pinctrl_lpcpme_default: lpcpme_default { + function = "LPCPME"; + groups = "LPCPME"; + }; + + pinctrl_lpcrst_default: lpcrst_default { + function = "LPCRST"; + groups = "LPCRST"; + }; + + pinctrl_lpcsmi_default: lpcsmi_default { + function = "LPCSMI"; + groups = "LPCSMI"; + }; + + pinctrl_lsirq_default: lsirq_default { + function = "LSIRQ"; + groups = "LSIRQ"; + }; + + pinctrl_mac1link_default: mac1link_default { + function = "MAC1LINK"; + groups = "MAC1LINK"; + }; + + pinctrl_mac2link_default: mac2link_default { + function = "MAC2LINK"; + groups = "MAC2LINK"; + }; + + pinctrl_mdio1_default: mdio1_default { + function = "MDIO1"; + groups = "MDIO1"; + }; + + pinctrl_mdio2_default: mdio2_default { + function = "MDIO2"; + groups = "MDIO2"; + }; + + pinctrl_ncts1_default: ncts1_default { + function = "NCTS1"; + groups = "NCTS1"; + }; + + pinctrl_ncts2_default: ncts2_default { + function = "NCTS2"; + groups = "NCTS2"; + }; + + pinctrl_ncts3_default: ncts3_default { + function = "NCTS3"; + groups = "NCTS3"; + }; + + pinctrl_ncts4_default: ncts4_default { + function = "NCTS4"; + groups = "NCTS4"; + }; + + pinctrl_ndcd1_default: ndcd1_default { + function = "NDCD1"; + groups = "NDCD1"; + }; + + pinctrl_ndcd2_default: ndcd2_default { + function = "NDCD2"; + groups = "NDCD2"; + }; + + pinctrl_ndcd3_default: ndcd3_default { + function = "NDCD3"; + groups = "NDCD3"; + }; + + pinctrl_ndcd4_default: ndcd4_default { + function = "NDCD4"; + groups = "NDCD4"; + }; + + pinctrl_ndsr1_default: ndsr1_default { + function = "NDSR1"; + groups = "NDSR1"; + }; + + pinctrl_ndsr2_default: ndsr2_default { + function = "NDSR2"; + groups = "NDSR2"; + }; + + pinctrl_ndsr3_default: ndsr3_default { + function = "NDSR3"; + groups = "NDSR3"; + }; + + pinctrl_ndsr4_default: ndsr4_default { + function = "NDSR4"; + groups = "NDSR4"; + }; + + pinctrl_ndtr1_default: ndtr1_default { + function = "NDTR1"; + groups = "NDTR1"; + }; + + pinctrl_ndtr2_default: ndtr2_default { + function = "NDTR2"; + groups = "NDTR2"; + }; + + pinctrl_ndtr3_default: ndtr3_default { + function = "NDTR3"; + groups = "NDTR3"; + }; + + pinctrl_ndtr4_default: ndtr4_default { + function = "NDTR4"; + groups = "NDTR4"; + }; + + pinctrl_nri1_default: nri1_default { + function = "NRI1"; + groups = "NRI1"; + }; + + pinctrl_nri2_default: nri2_default { + function = "NRI2"; + groups = "NRI2"; + }; + + pinctrl_nri3_default: nri3_default { + function = "NRI3"; + groups = "NRI3"; + }; + + pinctrl_nri4_default: nri4_default { + function = "NRI4"; + groups = "NRI4"; + }; + + pinctrl_nrts1_default: nrts1_default { + function = "NRTS1"; + groups = "NRTS1"; + }; + + pinctrl_nrts2_default: nrts2_default { + function = "NRTS2"; + groups = "NRTS2"; + }; + + pinctrl_nrts3_default: nrts3_default { + function = "NRTS3"; + groups = "NRTS3"; + }; + + pinctrl_nrts4_default: nrts4_default { + function = "NRTS4"; + groups = "NRTS4"; + }; + + pinctrl_oscclk_default: oscclk_default { + function = "OSCCLK"; + groups = "OSCCLK"; + }; + + pinctrl_pewake_default: pewake_default { + function = "PEWAKE"; + groups = "PEWAKE"; + }; + + pinctrl_pnor_default: pnor_default { + function = "PNOR"; + groups = "PNOR"; + }; + + pinctrl_pwm0_default: pwm0_default { + function = "PWM0"; + groups = "PWM0"; + }; + + pinctrl_pwm1_default: pwm1_default { + function = "PWM1"; + groups = "PWM1"; + }; + + pinctrl_pwm2_default: pwm2_default { + function = "PWM2"; + groups = "PWM2"; + }; + + pinctrl_pwm3_default: pwm3_default { + function = "PWM3"; + groups = "PWM3"; + }; + + pinctrl_pwm4_default: pwm4_default { + function = "PWM4"; + groups = "PWM4"; + }; + + pinctrl_pwm5_default: pwm5_default { + function = "PWM5"; + groups = "PWM5"; + }; + + pinctrl_pwm6_default: pwm6_default { + function = "PWM6"; + groups = "PWM6"; + }; + + pinctrl_pwm7_default: pwm7_default { + function = "PWM7"; + groups = "PWM7"; + }; + + pinctrl_rgmii1_default: rgmii1_default { + function = "RGMII1"; + groups = "RGMII1"; + }; + + pinctrl_rgmii2_default: rgmii2_default { + function = "RGMII2"; + groups = "RGMII2"; + }; + + pinctrl_rmii1_default: rmii1_default { + function = "RMII1"; + groups = "RMII1"; + }; + + pinctrl_rmii2_default: rmii2_default { + function = "RMII2"; + groups = "RMII2"; + }; + + pinctrl_rxd1_default: rxd1_default { + function = "RXD1"; + groups = "RXD1"; + }; + + pinctrl_rxd2_default: rxd2_default { + function = "RXD2"; + groups = "RXD2"; + }; + + pinctrl_rxd3_default: rxd3_default { + function = "RXD3"; + groups = "RXD3"; + }; + + pinctrl_rxd4_default: rxd4_default { + function = "RXD4"; + groups = "RXD4"; + }; + + pinctrl_salt1_default: salt1_default { + function = "SALT1"; + groups = "SALT1"; + }; + + pinctrl_salt10_default: salt10_default { + function = "SALT10"; + groups = "SALT10"; + }; + + pinctrl_salt11_default: salt11_default { + function = "SALT11"; + groups = "SALT11"; + }; + + pinctrl_salt12_default: salt12_default { + function = "SALT12"; + groups = "SALT12"; + }; + + pinctrl_salt13_default: salt13_default { + function = "SALT13"; + groups = "SALT13"; + }; + + pinctrl_salt14_default: salt14_default { + function = "SALT14"; + groups = "SALT14"; + }; + + pinctrl_salt2_default: salt2_default { + function = "SALT2"; + groups = "SALT2"; + }; + + pinctrl_salt3_default: salt3_default { + function = "SALT3"; + groups = "SALT3"; + }; + + pinctrl_salt4_default: salt4_default { + function = "SALT4"; + groups = "SALT4"; + }; + + pinctrl_salt5_default: salt5_default { + function = "SALT5"; + groups = "SALT5"; + }; + + pinctrl_salt6_default: salt6_default { + function = "SALT6"; + groups = "SALT6"; + }; + + pinctrl_salt7_default: salt7_default { + function = "SALT7"; + groups = "SALT7"; + }; + + pinctrl_salt8_default: salt8_default { + function = "SALT8"; + groups = "SALT8"; + }; + + pinctrl_salt9_default: salt9_default { + function = "SALT9"; + groups = "SALT9"; + }; + + pinctrl_scl1_default: scl1_default { + function = "SCL1"; + groups = "SCL1"; + }; + + pinctrl_scl2_default: scl2_default { + function = "SCL2"; + groups = "SCL2"; + }; + + pinctrl_sd1_default: sd1_default { + function = "SD1"; + groups = "SD1"; + }; + + pinctrl_sd2_default: sd2_default { + function = "SD2"; + groups = "SD2"; + }; + + pinctrl_sda1_default: sda1_default { + function = "SDA1"; + groups = "SDA1"; + }; + + pinctrl_sda2_default: sda2_default { + function = "SDA2"; + groups = "SDA2"; + }; + + pinctrl_sgps1_default: sgps1_default { + function = "SGPS1"; + groups = "SGPS1"; + }; + + pinctrl_sgps2_default: sgps2_default { + function = "SGPS2"; + groups = "SGPS2"; + }; + + pinctrl_sioonctrl_default: sioonctrl_default { + function = "SIOONCTRL"; + groups = "SIOONCTRL"; + }; + + pinctrl_siopbi_default: siopbi_default { + function = "SIOPBI"; + groups = "SIOPBI"; + }; + + pinctrl_siopbo_default: siopbo_default { + function = "SIOPBO"; + groups = "SIOPBO"; + }; + + pinctrl_siopwreq_default: siopwreq_default { + function = "SIOPWREQ"; + groups = "SIOPWREQ"; + }; + + pinctrl_siopwrgd_default: siopwrgd_default { + function = "SIOPWRGD"; + groups = "SIOPWRGD"; + }; + + pinctrl_sios3_default: sios3_default { + function = "SIOS3"; + groups = "SIOS3"; + }; + + pinctrl_sios5_default: sios5_default { + function = "SIOS5"; + groups = "SIOS5"; + }; + + pinctrl_siosci_default: siosci_default { + function = "SIOSCI"; + groups = "SIOSCI"; + }; + + pinctrl_spi1_default: spi1_default { + function = "SPI1"; + groups = "SPI1"; + }; + + pinctrl_spi1cs1_default: spi1cs1_default { + function = "SPI1CS1"; + groups = "SPI1CS1"; + }; + + pinctrl_spi1debug_default: spi1debug_default { + function = "SPI1DEBUG"; + groups = "SPI1DEBUG"; + }; + + pinctrl_spi1passthru_default: spi1passthru_default { + function = "SPI1PASSTHRU"; + groups = "SPI1PASSTHRU"; + }; + + pinctrl_spi2ck_default: spi2ck_default { + function = "SPI2CK"; + groups = "SPI2CK"; + }; + + pinctrl_spi2cs0_default: spi2cs0_default { + function = "SPI2CS0"; + groups = "SPI2CS0"; + }; + + pinctrl_spi2cs1_default: spi2cs1_default { + function = "SPI2CS1"; + groups = "SPI2CS1"; + }; + + pinctrl_spi2miso_default: spi2miso_default { + function = "SPI2MISO"; + groups = "SPI2MISO"; + }; + + pinctrl_spi2mosi_default: spi2mosi_default { + function = "SPI2MOSI"; + groups = "SPI2MOSI"; + }; + + pinctrl_timer3_default: timer3_default { + function = "TIMER3"; + groups = "TIMER3"; + }; + + pinctrl_timer4_default: timer4_default { + function = "TIMER4"; + groups = "TIMER4"; + }; + + pinctrl_timer5_default: timer5_default { + function = "TIMER5"; + groups = "TIMER5"; + }; + + pinctrl_timer6_default: timer6_default { + function = "TIMER6"; + groups = "TIMER6"; + }; + + pinctrl_timer7_default: timer7_default { + function = "TIMER7"; + groups = "TIMER7"; + }; + + pinctrl_timer8_default: timer8_default { + function = "TIMER8"; + groups = "TIMER8"; + }; + + pinctrl_txd1_default: txd1_default { + function = "TXD1"; + groups = "TXD1"; + }; + + pinctrl_txd2_default: txd2_default { + function = "TXD2"; + groups = "TXD2"; + }; + + pinctrl_txd3_default: txd3_default { + function = "TXD3"; + groups = "TXD3"; + }; + + pinctrl_txd4_default: txd4_default { + function = "TXD4"; + groups = "TXD4"; + }; + + pinctrl_uart6_default: uart6_default { + function = "UART6"; + groups = "UART6"; + }; + + pinctrl_usbcki_default: usbcki_default { + function = "USBCKI"; + groups = "USBCKI"; + }; + + pinctrl_vgabiosrom_default: vgabiosrom_default { + function = "VGABIOSROM"; + groups = "VGABIOSROM"; + }; + + pinctrl_vgahs_default: vgahs_default { + function = "VGAHS"; + groups = "VGAHS"; + }; + + pinctrl_vgavs_default: vgavs_default { + function = "VGAVS"; + groups = "VGAVS"; + }; + + pinctrl_vpi24_default: vpi24_default { + function = "VPI24"; + groups = "VPI24"; + }; + + pinctrl_vpo_default: vpo_default { + function = "VPO"; + groups = "VPO"; + }; + + pinctrl_wdtrst1_default: wdtrst1_default { + function = "WDTRST1"; + groups = "WDTRST1"; + }; + + pinctrl_wdtrst2_default: wdtrst2_default { + function = "WDTRST2"; + groups = "WDTRST2"; + }; + + }; + }; + clk_hpll: clk_hpll@1e6e2024 { #clock-cells = <0>; compatible = "aspeed,g5-hpll-clock"; @@ -71,11 +903,27 @@ reg = <0x1e6e202c 0x4>; }; + gfx: display@1e6e6000 { + compatible = "aspeed,ast2500-gfx", "syscon"; + reg = <0x1e6e6000 0x1000>; + reg-io-width = <4>; + }; + sram@1e720000 { compatible = "mmio-sram"; reg = <0x1e720000 0x9000>; // 36K }; + gpio: gpio@1e780000 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2500-gpio"; + reg = <0x1e780000 0x1000>; + interrupts = <20>; + gpio-ranges = <&pinctrl 0 0 220>; + interrupt-controller; + }; + timer: timer@1e782000 { compatible = "aspeed,ast2400-timer"; reg = <0x1e782000 0x90>; @@ -86,6 +934,7 @@ clocks = <&clk_apb>; }; + wdt1: wdt@1e785000 { compatible = "aspeed,wdt"; reg = <0x1e785000 0x1c>; @@ -115,6 +964,36 @@ status = "disabled"; }; + lpc: lpc@1e789000 { + compatible = "aspeed,ast2500-lpc", "simple-mfd"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e789000 0x1000>; + + lpc_bmc: lpc-bmc@0 { + compatible = "aspeed,ast2500-lpc-bmc"; + reg = <0x0 0x80>; + }; + + lpc_host: lpc-host@80 { + compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; + reg = <0x80 0x1e0>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80 0x1e0>; + + reg-io-width = <4>; + + lhc: lhc@20 { + compatible = "aspeed,ast2500-lhc"; + reg = <0x20 0x24 0x48 0x8>; + }; + }; + }; + uart2: serial@1e78d000 { compatible = "ns16550a"; reg = <0x1e78d000 0x1000>; diff --git a/arch/arm/boot/dts/at91-linea.dtsi b/arch/arm/boot/dts/at91-linea.dtsi new file mode 100644 index 000000000000..0721c8472509 --- /dev/null +++ b/arch/arm/boot/dts/at91-linea.dtsi @@ -0,0 +1,49 @@ +/* + * at91-linea.dtsi - Device Tree Include file for the Axentia Linea Module. + * + * Copyright (C) 2017 Axentia Technologies AB + * + * Author: Peter Rosin <peda@axentia.se> + * + * Licensed under GPLv2 or later. + */ + +#include "sama5d31.dtsi" + +/ { + compatible = "axentia,linea", + "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + memory { + reg = <0x20000000 0x4000000>; + }; +}; + +&slow_xtal { + clock-frequency = <32768>; +}; + +&main_xtal { + clock-frequency = <12000000>; +}; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "st,24c64"; + reg = <0x51>; + pagesize = <32>; + }; +}; + +&nand0 { + status = "okay"; + + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; +}; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 0b9a59d5fdac..9f7f8a7d8ff9 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -148,6 +148,8 @@ uart1: serial@f8020000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_default>; + atmel,use-dma-rx; + atmel,use-dma-tx; status = "okay"; }; @@ -256,6 +258,8 @@ }; uart3: serial@fc008000 { + atmel,use-dma-rx; + atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3_default>; status = "okay"; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index ed7fce297738..5ab14cedb1db 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -69,6 +69,12 @@ ahb { apb { + uart0: serial@f8004000 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + }; + spi0: spi@f8010000 { cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; status = "okay"; @@ -110,6 +116,8 @@ }; usart3: serial@fc00c000 { + atmel,use-dma-rx; + atmel,use-dma-tx; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts new file mode 100644 index 000000000000..669a2c6bdefc --- /dev/null +++ b/arch/arm/boot/dts/at91-tse850-3.dts @@ -0,0 +1,274 @@ +/* + * at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board + * + * Copyright (C) 2017 Axentia Technologies AB + * + * Author: Peter Rosin <peda@axentia.se> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include <dt-bindings/pwm/pwm.h> +#include "at91-linea.dtsi" + +/ { + model = "Axentia TSE-850 3.0"; + compatible = "axentia,tse850v3", "axentia,linea", + "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + pinctrl@fffff200 { + tse850 { + pinctrl_usba_vbus: usba-vbus { + atmel,pins = + <AT91_PIOC 31 + AT91_PERIPH_GPIO + AT91_PINCTRL_DEGLITCH>; + }; + }; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + }; + + sck: oscillator { + compatible = "fixed-clock"; + + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "sck"; + }; + + reg_3v3: regulator { + compatible = "regulator-fixed"; + + regulator-name = "3v3-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ana: reg-ana { + compatible = "pwm-regulator"; + + regulator-name = "ANA"; + + pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>; + pwm-dutycycle-unit = <1000>; + pwm-dutycycle-range = <100 1000>; + + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <20000000>; + regulator-ramp-delay = <1000>; + }; + + sound { + compatible = "axentia,tse850-pcm5142"; + + axentia,cpu-dai = <&ssc0>; + axentia,audio-codec = <&pcm5142>; + + axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>; + axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>; + axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>; + + axentia,ana-supply = <&ana>; + }; + + dac: dpot-dac { + compatible = "dpot-dac"; + vref-supply = <®_3v3>; + io-channels = <&dpot 0>; + io-channel-names = "dpot"; + #io-channel-cells = <1>; + }; + + envelope-detector { + compatible = "axentia,tse850-envelope-detector"; + io-channels = <&dac 0>; + io-channel-names = "dac"; + + interrupt-parent = <&pioA>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "comp"; + }; + + leds { + compatible = "gpio-leds"; + + ch1-red { + label = "ch-1:red"; + gpios = <&pioA 23 GPIO_ACTIVE_LOW>; + }; + ch1-green { + label = "ch-1:green"; + gpios = <&pioA 22 GPIO_ACTIVE_LOW>; + }; + ch2-red { + label = "ch-2:red"; + gpios = <&pioA 21 GPIO_ACTIVE_LOW>; + }; + ch2-green { + label = "ch-2:green"; + gpios = <&pioA 20 GPIO_ACTIVE_LOW>; + }; + data-red { + label = "data:red"; + gpios = <&pioA 19 GPIO_ACTIVE_LOW>; + }; + data-green { + label = "data:green"; + gpios = <&pioA 18 GPIO_ACTIVE_LOW>; + }; + alarm-red { + label = "alarm:red"; + gpios = <&pioA 17 GPIO_ACTIVE_LOW>; + }; + alarm-green { + label = "alarm:green"; + gpios = <&pioA 16 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&nand0 { + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + barebox@40000 { + label = "bootloader"; + reg = <0x40000 0x60000>; + }; + + bareboxenv@c0000 { + label = "bareboxenv"; + reg = <0xc0000 0x40000>; + }; + + bareboxenv2@100000 { + label = "bareboxenv2"; + reg = <0x100000 0x40000>; + }; + + oftree@180000 { + label = "oftree"; + reg = <0x180000 0x20000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x500000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + + ovlfs@10000000 { + label = "ovlfs"; + reg = <0x10000000 0x10000000>; + }; +}; + +&ssc0 { + #sound-dai-cells = <0>; + + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + jc42@18 { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x18>; + }; + + dpot: mcp4651-104@28 { + compatible = "microchip,mcp4651-104"; + reg = <0x28>; + #io-channel-cells = <1>; + }; + + pcm5142: pcm5142@4c { + compatible = "ti,pcm5142"; + + reg = <0x4c>; + + AVDD-supply = <®_3v3>; + DVDD-supply = <®_3v3>; + CPVDD-supply = <®_3v3>; + + clocks = <&sck>; + + pll-in = <3>; + pll-out = <6>; + }; + + eeprom@50 { + compatible = "nxp,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&usart0 { + status = "okay"; + + atmel,use-dma-rx; +}; + +&pwm0 { + status = "okay"; + + pinctrl-0 = <&pinctrl_pwm0_pwml2_1>; + pinctrl-names = "default"; +}; + +&macb1 { + status = "okay"; + + phy-mode = "rgmii"; + + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@3 { + reg = <3>; + + interrupt-parent = <&pioE>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&usb0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + atmel,vbus-gpio = <&pioC 31 GPIO_ACTIVE_HIGH>; +}; + +&usb1 { + status = "okay"; + + num-ports = <1>; + atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; + atmel,oc-gpio = <&pioC 15 GPIO_ACTIVE_LOW>; +}; + +&usb2 { + status = "okay"; +}; + +&dbgu { + status = "okay"; + + dmas = <0>, <0>; /* Do not use DMA for dbgu */ +}; diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi index a9d6d593fc8a..47799f59faa5 100644 --- a/arch/arm/boot/dts/axm55xx.dtsi +++ b/arch/arm/boot/dts/axm55xx.dtsi @@ -62,7 +62,7 @@ #address-cells = <0>; interrupt-controller; reg = <0x20 0x01001000 0 0x1000>, - <0x20 0x01002000 0 0x1000>, + <0x20 0x01002000 0 0x2000>, <0x20 0x01004000 0 0x2000>, <0x20 0x01006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | diff --git a/arch/arm/boot/dts/axp223.dtsi b/arch/arm/boot/dts/axp223.dtsi new file mode 100644 index 000000000000..b91b6c1278c7 --- /dev/null +++ b/arch/arm/boot/dts/axp223.dtsi @@ -0,0 +1,58 @@ +/* + * Copyright 2016 Free Electrons + * + * Quentin Schulz <quentin.schulz@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * AXP223 Integrated Power Management Chip + * http://www.x-powers.com/product/AXP22X.php + * http://dl.linux-sunxi.org/AXP/AXP223-en.pdf + * + * The AXP223 shares most of its logic with the AXP221 but it has some + * differences, for the VBUS driver for example. + */ + +#include "axp22x.dtsi" + +&usb_power_supply { + compatible = "x-powers,axp223-usb-power-supply"; +}; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index b6142bda661e..832795b0fd0f 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -160,7 +160,7 @@ axi { compatible = "simple-bus"; - ranges = <0x00000000 0x18000000 0x0011c40a>; + ranges = <0x00000000 0x18000000 0x0011c40c>; #address-cells = <1>; #size-cells = <1>; @@ -209,6 +209,15 @@ #dma-cells = <1>; }; + sdio: sdhci@21000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x21000 0x100>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + sdhci,auto-cmd12; + clocks = <&lcpll0 BCM_NSP_LCPLL0_SDIO_CLK>; + status = "disabled"; + }; + amac0: ethernet@22000 { compatible = "brcm,nsp-amac"; reg = <0x022000 0x1000>, @@ -227,6 +236,15 @@ status = "disabled"; }; + amac2: ethernet@24000 { + compatible = "brcm,nsp-amac"; + reg = <0x024000 0x1000>, + <0x112000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + nand: nand@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, @@ -241,29 +259,6 @@ brcm,nand-has-wp; }; - gpiob: gpio@30000 { - compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio"; - reg = <0x30000 0x50>; - #gpio-cells = <2>; - gpio-controller; - ngpios = <4>; - interrupt-controller; - interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - }; - - pwm: pwm@31000 { - compatible = "brcm,iproc-pwm"; - reg = <0x31000 0x28>; - clocks = <&osc>; - #pwm-cells = <3>; - status = "disabled"; - }; - - rng: rng@33000 { - compatible = "brcm,bcm-nsp-rng"; - reg = <0x33000 0x14>; - }; - qspi: qspi@27200 { compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; reg = <0x027200 0x184>, @@ -293,6 +288,29 @@ #size-cells = <0>; }; + gpiob: gpio@30000 { + compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio"; + reg = <0x30000 0x50>; + #gpio-cells = <2>; + gpio-controller; + ngpios = <4>; + interrupt-controller; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + }; + + pwm: pwm@31000 { + compatible = "brcm,iproc-pwm"; + reg = <0x31000 0x28>; + clocks = <&osc>; + #pwm-cells = <3>; + status = "disabled"; + }; + + rng: rng@33000 { + compatible = "brcm,bcm-nsp-rng"; + reg = <0x33000 0x14>; + }; + ccbtimer0: timer@34000 { compatible = "arm,sp804"; reg = <0x34000 0x1000>; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index 6ddf7dfe3f72..38e6050035bc 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -87,3 +87,8 @@ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; status = "okay"; }; + +&vec { + power-domains = <&power RPI_POWER_DOMAIN_VEC>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 9a44da190897..a3106aa446c6 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -476,6 +476,14 @@ status = "disabled"; }; + vec: vec@7e806000 { + compatible = "brcm,bcm2835-vec"; + reg = <0x7e806000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = <2 27>; + status = "disabled"; + }; + pixelvalve@7e807000 { compatible = "brcm,bcm2835-pixelvalve2"; reg = <0x7e807000 0x100>; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts index 112a5a834ddc..d241cee4bfcc 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts index 3600f56f46f4..b0e62042f62f 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index 9cb186ea2e97..c9ba6b964b38 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; }; spi { @@ -136,10 +137,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &usb2 { vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts index 35e6ed6a3ef7..f591b0f256d8 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts @@ -55,10 +55,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &spi_nor { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index 1c7e53d60aa4..50d65d8fbd9a 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -56,10 +56,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &spi_nor { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 8ce39d58eeb8..b9f66c0fae27 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { @@ -83,10 +84,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &usb3 { vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 6229ef283c41..ae0199f6c7a2 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index 70f4bb9d864a..36b628b190d7 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { @@ -119,10 +120,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &spi_nor { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi index eed4dd159995..d0eec099f1f8 100644 --- a/arch/arm/boot/dts/bcm4708.dtsi +++ b/arch/arm/boot/dts/bcm4708.dtsi @@ -34,3 +34,7 @@ }; }; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index 71b98cfaf944..db8608be0ee7 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index a9c8defed4d3..d51586d95b9a 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; spi { @@ -122,7 +123,3 @@ }; }; }; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts index 184fd9214110..de041b8c3342 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; gpio-keys { diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts new file mode 100644 index 000000000000..9b5759849983 --- /dev/null +++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts @@ -0,0 +1,60 @@ +/* + * Copyright 2017 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm47081.dtsi" + +/ { + compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708"; + model = "Luxul XAP-1410 V1"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + 5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts new file mode 100644 index 000000000000..c544ab302012 --- /dev/null +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -0,0 +1,107 @@ +/* + * Copyright 2017 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm47081.dtsi" +#include "bcm5301x-nand-cs0-bch4.dtsi" + +/ { + compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708"; + model = "Luxul XWR-1200 V1"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + lan3 { + label = "bcm53xx:green:lan3"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + lan4 { + label = "bcm53xx:green:lan4"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + wan { + label = "bcm53xx:green:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + lan2 { + label = "bcm53xx:green:lan2"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + usb { + label = "bcm53xx:green:usb"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + + 2ghz { + label = "bcm53xx:green:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + 5ghz { + label = "bcm53xx:green:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + lan1 { + label = "bcm53xx:green:lan1"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi index f720012ee5ed..c5f7619af4a6 100644 --- a/arch/arm/boot/dts/bcm47081.dtsi +++ b/arch/arm/boot/dts/bcm47081.dtsi @@ -24,3 +24,7 @@ }; }; }; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index eac0f52e5ebd..eaca6876db0f 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index aab39c9864da..b32957ca9443 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index fd38d2aa3521..f459a98a72c6 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { @@ -101,6 +102,10 @@ }; }; -&uart0 { - status = "okay"; +&usb2 { + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index 92f8a7219e98..8e39a84e5bf9 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { @@ -107,8 +108,52 @@ }; }; -&uart0 { - status = "okay"; +&pcie0 { + #address-cells = <3>; + #size-cells = <2>; + + bridge@0,0,0 { + reg = <0x0000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + wifi@0,1,0 { + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5735000 5835000>; + }; + }; +}; + +&pcie1 { + #address-cells = <3>; + #size-cells = <2>; + + bridge@1,0,0 { + reg = <0x0000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + bridge@1,1,0 { + reg = <0x0000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + bridge@1,2,2 { + reg = <0x1000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + wifi@1,4,0 { + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5170000 5730000>; + }; + }; + }; + }; }; &usb2 { diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts index 9a92c24ac2d8..c67bfaa0c8e8 100644 --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -97,10 +97,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &usb2 { vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi index f03976597a6d..c645fea2b7f7 100644 --- a/arch/arm/boot/dts/bcm4709.dtsi +++ b/arch/arm/boot/dts/bcm4709.dtsi @@ -8,4 +8,5 @@ &uart0 { clock-frequency = <125000000>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index 661348dbb7ce..64ded7643e9f 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; nand: nand@18028000 { @@ -105,10 +106,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &usb3 { vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index 169b35fe5651..5cf4ab1ebe85 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -18,7 +18,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { @@ -31,13 +32,13 @@ }; lan3 { - label = "bcm53xx:green:lan1"; + label = "bcm53xx:green:lan3"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-off"; }; lan4 { - label = "bcm53xx:green:lan0"; + label = "bcm53xx:green:lan4"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-off"; }; @@ -49,7 +50,7 @@ }; lan1 { - label = "bcm53xx:green:lan3"; + label = "bcm53xx:green:lan1"; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-off"; }; @@ -98,10 +99,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &usb3 { vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts index 521b4155de60..600795ee1aed 100644 --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts @@ -18,7 +18,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; }; leds { @@ -97,7 +98,3 @@ }; }; }; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi index 4f09aa0114e6..4840a782fc05 100644 --- a/arch/arm/boot/dts/bcm47094.dtsi +++ b/arch/arm/boot/dts/bcm47094.dtsi @@ -14,4 +14,5 @@ &uart0 { clock-frequency = <125000000>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index f09a2bb08979..4fbb089cf5ad 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -243,13 +243,39 @@ #gpio-cells = <2>; }; + pcie0: pcie@12000 { + reg = <0x00012000 0x1000>; + }; + + pcie1: pcie@13000 { + reg = <0x00013000 0x1000>; + }; + usb2: usb2@21000 { reg = <0x00021000 0x1000>; #address-cells = <1>; #size-cells = <1>; + ranges; + + interrupt-parent = <&gic>; + + ehci: ehci@21000 { + #usb-cells = <0>; + + compatible = "generic-ehci"; + reg = <0x00021000 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy>; + }; + + ohci: ohci@22000 { + #usb-cells = <0>; - phys = <&usb2_phy>; + compatible = "generic-ohci"; + reg = <0x00022000 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + }; }; usb3: usb3@23000 { @@ -257,6 +283,19 @@ #address-cells = <1>; #size-cells = <1>; + ranges; + + interrupt-parent = <&gic>; + + xhci: xhci@23000 { + #usb-cells = <0>; + + compatible = "generic-xhci"; + reg = <0x00023000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_phy>; + phy-names = "usb"; + }; }; spi@29000 { diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index e2c496a96c32..2da04d0a7348 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -124,6 +124,17 @@ reg = <0x4000 0x1000>; interrupt-parent = <&gic>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + ehci_port1: port@1 { + reg = <1>; + }; + + ehci_port2: port@2 { + reg = <2>; + }; }; ohci: ohci@d000 { @@ -133,6 +144,17 @@ reg = <0xd000 0x1000>; interrupt-parent = <&gic>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + ohci_port1: port@1 { + reg = <1>; + }; + + ohci_port2: port@2 { + reg = <2>; + }; }; }; diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts index 251a486f2da6..42855a7c1bfa 100644 --- a/arch/arm/boot/dts/bcm94708.dts +++ b/arch/arm/boot/dts/bcm94708.dts @@ -50,7 +50,3 @@ reg = <0x00000000 0x08000000>; }; }; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts index b16cac92904f..95e8be65f2f1 100644 --- a/arch/arm/boot/dts/bcm94709.dts +++ b/arch/arm/boot/dts/bcm94709.dts @@ -50,7 +50,3 @@ reg = <0x00000000 0x08000000>; }; }; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts index 0a9abecf9423..decd86bae901 100644 --- a/arch/arm/boot/dts/bcm953012er.dts +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -70,10 +70,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &spi_nor { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index 05a985a20378..bfd923096a8c 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -54,7 +54,6 @@ &uart0 { clock-frequency = <62499840>; - status = "okay"; }; &uart1 { diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index a21b0fd21f4e..3f04a40eb90c 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -65,7 +65,6 @@ status = "okay"; }; - &amac1 { status = "okay"; }; @@ -125,6 +124,40 @@ }; }; +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index be7f2f8ecf39..9fd542200d3d 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -65,7 +65,6 @@ status = "okay"; }; - &amac1 { status = "okay"; }; @@ -125,6 +124,40 @@ }; }; +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + &sata_phy0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index 959cde911c3c..41e7fd350fcd 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -59,6 +59,12 @@ }; }; +/* XHCI support needed to be complete */ + +&amac0 { + status = "okay"; +}; + &i2c0 { temperature-sensor@4c { compatible = "adi,adt7461a"; @@ -115,12 +121,6 @@ }; }; -/* XHCI, MMC, and Ethernet support needed to be complete */ - -&uart0 { - status = "okay"; -}; - &pcie0 { status = "okay"; }; @@ -129,6 +129,49 @@ status = "okay"; }; +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; + +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + &sata_phy0 { status = "okay"; }; @@ -141,11 +184,10 @@ status = "okay"; }; -&pinctrl { - pinctrl-names = "default"; - pinctrl-0 = <&nand_sel>; - nand_sel: nand_sel { - function = "nand"; - groups = "nand_grp"; - }; +&sdio { + status = "ok"; +}; + +&uart0 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index ad2aa87dd15a..477c4860db52 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -65,6 +65,14 @@ status = "okay"; }; +&amac1 { + status = "okay"; +}; + +&amac2 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -120,6 +128,40 @@ }; }; +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + &srab { compatible = "brcm,bcm58622-srab", "brcm,nsp-srab"; status = "okay"; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index 4ceb8fef8041..c0a499d5ba44 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -65,6 +65,14 @@ status = "okay"; }; +&amac1 { + status = "okay"; +}; + +&amac2 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -120,6 +128,48 @@ }; }; +&sata_phy0 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + &srab { compatible = "brcm,bcm58623-srab", "brcm,nsp-srab"; status = "okay"; @@ -165,14 +215,6 @@ }; }; -&sata_phy0 { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index 442002597063..f7eb5854a224 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -1,7 +1,7 @@ /* * BSD LICENSE * - * Copyright (c) 2016 Broadcom. All rights reserved. + * Copyright(c) 2016 Broadcom. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -59,6 +59,18 @@ }; }; +&amac0 { + status = "okay"; +}; + +&amac1 { + status = "okay"; +}; + +&amac2 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -97,10 +109,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &pcie0 { status = "okay"; }; @@ -118,7 +126,49 @@ }; }; -&amac0 { +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&sata { status = "okay"; }; @@ -167,14 +217,6 @@ }; }; -&sata_phy0 { - status = "okay"; -}; - -&sata_phy1 { - status = "okay"; -}; - -&sata { +&uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 59d96fb91583..f8d47e517e18 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -53,14 +53,6 @@ }; }; -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - &amac0 { status = "okay"; }; @@ -69,27 +61,7 @@ status = "okay"; }; -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; -}; - -&pcie2 { - status = "okay"; -}; - -&sata_phy0 { - status = "okay"; -}; - -&sata_phy1 { - status = "okay"; -}; - -&sata { +&amac2 { status = "okay"; }; @@ -112,32 +84,65 @@ reg = <0x00000000 0x00200000>; read-only; }; - partition@1 { + partition@200000 { label = "nenv"; reg = <0x00200000 0x00400000>; }; - partition@2 { + partition@600000 { label = "nsystem"; reg = <0x00600000 0x00a00000>; }; - partition@3 { + partition@1000000 { label = "nrootfs"; reg = <0x01000000 0x03000000>; }; - partition@4 { + partition@4000000 { label = "ncustfs"; reg = <0x04000000 0x3c000000>; }; }; }; +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie2 { + status = "okay"; +}; + &pinctrl { pinctrl-names = "default"; - pinctrl-0 = <&nand_sel>; + pinctrl-0 = <&nand_sel>, <&gpiobs>, <&pwmc>; + nand_sel: nand_sel { function = "nand"; groups = "nand_grp"; }; + + gpiobs: gpiobs { + function = "gpio_b"; + groups = "gpio_b_0_grp", "gpio_b_1_grp", "gpio_b_2_grp", + "gpio_b_3_grp"; + }; + + pwmc: pwmc { + function = "pwm"; + groups = "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp"; + }; + + emmc_sel: emmc_sel { + function = "emmc"; + groups = "emmc_grp"; + }; +}; + +&pwm { + status = "okay"; }; &qspi { @@ -173,3 +178,81 @@ }; }; }; + +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +/* + * By default the sd slot is functional. For emmc to work add "<&emmc_sel>" + * and delete "<&nand_sel>" in "pinctrl-0" property of pinctrl node. Remove the + * bus-width property here and disable the nand node with status = "disabled";. + * + * Ex: pinctrl-0 = <&emmc_sel>, <&gpiobs>, <&pwmc>; + */ +&sdio { + bus-width = <4>; + no-1-8-v; + status = "ok"; +}; + +&srab { + compatible = "brcm,bcm58625-srab", "brcm,nsp-srab"; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + label = "port0"; + reg = <0>; + }; + + port@1 { + label = "port1"; + reg = <1>; + }; + + port@2 { + label = "port2"; + reg = <2>; + }; + + port@3 { + label = "port3"; + reg = <3>; + }; + + port@4 { + label = "port4"; + reg = <4>; + }; + + port@5 { + ethernet = <&amac0>; + label = "cpu"; + reg = <5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index 104afe98a43b..16666324fda8 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -65,6 +65,14 @@ status = "okay"; }; +&amac1 { + status = "okay"; +}; + +&amac2 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -120,6 +128,40 @@ }; }; +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + &sata_phy0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 41de15fe15a2..d15107cba765 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -99,6 +99,7 @@ #size-cells = <1>; compatible = "m25p64"; spi-max-frequency = <30000000>; + m25p,fast-read; reg = <0>; partition@0 { label = "U-Boot-SPL"; @@ -289,3 +290,23 @@ }; }; }; + +&vpif { + pinctrl-names = "default"; + pinctrl-0 = <&vpif_capture_pins>; + status = "okay"; + + /* VPIF capture port */ + port { + vpif_ch0: endpoint@0 { + reg = <0>; + bus-width = <8>; + }; + + vpif_ch1: endpoint@1 { + reg = <1>; + bus-width = <8>; + data-shift = <8>; + }; + }; +}; diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index afcb4821deb1..b837fec70eec 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "da850.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "DA850/AM1808/OMAP-L138 LCDK"; @@ -51,6 +52,62 @@ system-clock-frequency = <24576000>; }; }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + user1 { + label = "GPIO Key USER1"; + linux,code = <BTN_0>; + gpios = <&gpio 36 GPIO_ACTIVE_LOW>; + }; + + user2 { + label = "GPIO Key USER2"; + linux,code = <BTN_1>; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + }; + }; + + vga-bridge { + compatible = "ti,ths8135"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&lcdc_out_vga>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + ddc-i2c-bus = <&i2c0>; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; }; &pmx_core { @@ -105,6 +162,10 @@ status = "okay"; }; +&sata { + status = "okay"; +}; + &mdio { pinctrl-names = "default"; pinctrl-0 = <&mdio_pins>; @@ -167,6 +228,10 @@ status = "okay"; }; +&usb1 { + status = "okay"; +}; + &aemif { pinctrl-names = "default"; pinctrl-0 = <&nand_pins>; @@ -236,3 +301,28 @@ &memctrl { status = "okay"; }; + +&lcdc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + port { + lcdc_out_vga: endpoint { + remote-endpoint = <&vga_bridge_in>; + }; + }; +}; + +&vpif { + pinctrl-names = "default"; + pinctrl-0 = <&vpif_capture_pins>; + status = "okay"; + + /* VPIF capture port */ + port { + vpif_ch0: endpoint { + bus-width = <8>; + }; + }; +}; diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts new file mode 100644 index 000000000000..112ec92064ce --- /dev/null +++ b/arch/arm/boot/dts/da850-lego-ev3.dts @@ -0,0 +1,313 @@ +/* + * Device tree for LEGO MINDSTORMS EV3 + * + * Copyright (C) 2017 David Lechner <david@lechnology.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, version 2. + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> + +#include "da850.dtsi" + +/ { + compatible = "lego,ev3", "ti,da850"; + model = "LEGO MINDSTORMS EV3"; + + aliases { + serial1 = &serial1; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x04000000>; + }; + + /* + * The buttons on the EV3 are mapped to keyboard keys. + */ + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + label = "EV3 Brick Buttons"; + pinctrl-names = "default"; + pinctrl-0 = <&button_pins>, <&button_bias>; + + center { + label = "Center"; + linux,code = <KEY_ENTER>; + gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; + }; + + left { + label = "Left"; + linux,code = <KEY_LEFT>; + gpios = <&gpio 102 GPIO_ACTIVE_HIGH>; + }; + + back { + label = "Back"; + linux,code = <KEY_BACKSPACE>; + gpios = <&gpio 106 GPIO_ACTIVE_HIGH>; + }; + + right { + label = "Right"; + linux,code = <KEY_RIGHT>; + gpios = <&gpio 124 GPIO_ACTIVE_HIGH>; + }; + + down { + label = "Down"; + linux,code = <KEY_DOWN>; + gpios = <&gpio 126 GPIO_ACTIVE_HIGH>; + }; + + up { + label = "Up"; + linux,code = <KEY_UP>; + gpios = <&gpio 127 GPIO_ACTIVE_HIGH>; + }; + }; + + /* + * The EV3 has two built-in bi-color LEDs behind the buttons. + */ + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + left_green { + label = "led0:green:brick-status"; + /* GP6[13] */ + gpios = <&gpio 103 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + right_red { + label = "led1:red:brick-status"; + /* GP6[7] */ + gpios = <&gpio 108 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + left_red { + label = "led0:red:brick-status"; + /* GP6[12] */ + gpios = <&gpio 109 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + right_green { + label = "led1:green:brick-status"; + /* GP6[14] */ + gpios = <&gpio 110 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + /* + * The EV3 is powered down by turning off the main 5V supply. + */ + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio 107 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&system_power_pin>; + }; + + /* + * This is a 5V current limiting regulator that is shared by USB, + * the sensor (input) ports, the motor (output) ports and the A/DC. + */ + vcc5v: regulator1 { + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v_pins>; + compatible = "regulator-fixed"; + regulator-name = "vcc5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 101 0>; + over-current-gpios = <&gpio 99 GPIO_ACTIVE_LOW>; + enable-active-high; + regulator-boot-on; + }; +}; + +&pmx_core { + status = "okay"; + + spi0_cs3_pin: pinmux_spi0_cs3_pin { + pinctrl-single,bits = < + /* CS3 */ + 0xc 0x01000000 0x0f000000 + >; + }; + + mmc0_cd_pin: pinmux_mmc0_cd { + pinctrl-single,bits = < + /* GP5[14] */ + 0x2C 0x00000080 0x000000f0 + >; + }; + + button_pins: pinmux_button_pins { + pinctrl-single,bits = < + /* GP1[13] */ + 0x8 0x00000800 0x00000f00 + /* GP6[10] */ + 0x34 0x00800000 0x00f00000 + /* GP6[6] */ + 0x38 0x00000080 0x000000f0 + /* GP7[12], GP7[14], GP7[15] */ + 0x40 0x00808800 0x00f0ff00 + >; + }; + + led_pins: pinmux_led_pins { + pinctrl-single,bits = < + /* GP6[12], GP6[13], GP6[14] */ + 0x34 0x00008880 0x0000fff0 + /* GP6[7] */ + 0x38 0x00000008 0x0000000f + >; + }; + + system_power_pin: pinmux_system_power { + pinctrl-single,bits = < + /* GP6[11] */ + 0x34 0x00080000 0x000f0000 + >; + }; + + vcc5v_pins: pinmux_vcc5v { + pinctrl-single,bits = < + /* GP6[5] */ + 0x40 0x00000080 0x000000f0 + /* GP6[3] */ + 0x4c 0x00008000 0x0000f000 + >; + }; +}; + +&pinconf { + status = "okay"; + + /* Buttons have external pulldown resistors */ + button_bias: button-bias-groups { + disable { + groups = "cp5", "cp24", "cp25", "cp28"; + bias-disable; + }; + }; +}; + +/* Input port 1 */ +&serial1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&serial1_rxtx_pins>; +}; + +&rtc0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + /* + * EEPROM contains the first stage bootloader, HW ID and Bluetooth MAC. + */ + eeprom@50 { + compatible = "microchip,24c128"; + pagesize = <64>; + read-only; + reg = <0x50>; + }; +}; + +&wdt { + status = "okay"; +}; + +&mmc0 { + status = "okay"; + max-frequency = <50000000>; + bus-width = <4>; + cd-gpios = <&gpio 94 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin>; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>, <&spi0_cs3_pin>; + + flash@0 { + compatible = "n25q128a13", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + ti,spi-wdelay = <8>; + + /* Partitions are based on the official firmware from LEGO */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x40000>; + }; + + partition@40000 { + label = "U-Boot Env"; + reg = <0x40000 0x10000>; + }; + + partition@50000 { + label = "Kernel"; + reg = <0x50000 0x200000>; + }; + + partition@250000 { + label = "Filesystem"; + reg = <0x250000 0xa50000>; + }; + + partition@cb0000 { + label = "Storage"; + reg = <0xcb0000 0x2f0000>; + }; + }; + }; +}; + +&gpio { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; + vbus-supply = <&vcc5v>; +}; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 104155d12c2f..92d633d1da68 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -208,7 +208,18 @@ 0x4c 0x02000022 0x0f0000ff >; }; - + vpif_capture_pins: vpif_capture_pins { + pinctrl-single,bits = < + /* VP_DIN[2..7], VP_CLKIN1, VP_CLKIN0 */ + 0x38 0x11111111 0xffffffff + /* VP_DIN[10..15,0..1] */ + 0x3c 0x11111111 0xffffffff + /* VP_DIN[8..9] */ + 0x40 0x00000011 0x000000ff + /* VP_CLKIN3, VP_CLKIN2 */ + 0x4c 0x00010100 0x000f0f00 + >; + }; }; prictrl: priority-controller@14110 { compatible = "ti,da850-mstpri"; @@ -266,22 +277,25 @@ interrupt-names = "edm3_tcerrint"; }; serial0: serial@42000 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; reg = <0x42000 0x100>; + reg-io-width = <4>; reg-shift = <2>; interrupts = <25>; status = "disabled"; }; serial1: serial@10c000 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; reg = <0x10c000 0x100>; + reg-io-width = <4>; reg-shift = <2>; interrupts = <53>; status = "disabled"; }; serial2: serial@10d000 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; reg = <0x10d000 0x100>; + reg-io-width = <4>; reg-shift = <2>; interrupts = <61>; status = "disabled"; @@ -324,6 +338,18 @@ dma-names = "rx", "tx"; status = "disabled"; }; + vpif: video@217000 { + compatible = "ti,da850-vpif"; + reg = <0x217000 0x1000>; + interrupts = <92>; + status = "disabled"; + + /* VPIF capture port */ + port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; mmc1: mmc@21b000 { compatible = "ti,da830-mmc"; reg = <0x21b000 0x1000>; @@ -403,6 +429,12 @@ phy-names = "usb-phy"; status = "disabled"; }; + sata: sata@218000 { + compatible = "ti,da850-ahci"; + reg = <0x218000 0x2000>, <0x22c018 0x4>; + interrupts = <67>; + status = "disabled"; + }; mdio: mdio@224000 { compatible = "ti,davinci_mdio"; #address-cells = <1>; @@ -425,6 +457,14 @@ >; status = "disabled"; }; + usb1: usb@225000 { + compatible = "ti,da830-ohci"; + reg = <0x225000 0x1000>; + interrupts = <59>; + phys = <&usb_phy 1>; + phy-names = "usb-phy"; + status = "disabled"; + }; gpio: gpio@226000 { compatible = "ti,dm6441-gpio"; gpio-controller; @@ -458,10 +498,11 @@ dma-names = "tx", "rx"; }; - display: display@213000 { + lcdc: display@213000 { compatible = "ti,da850-tilcdc"; reg = <0x213000 0x1000>; interrupts = <52>; + max-pixelclock = <37500>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 1facc5f12cef..9708157f5daf 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -12,6 +12,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c1; @@ -251,7 +252,7 @@ }; uart1: uart@20000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart1"; reg = <0x20000 0x2000>; clock-frequency = <48000000>; @@ -261,7 +262,7 @@ }; uart2: uart@22000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart2"; reg = <0x22000 0x2000>; clock-frequency = <48000000>; @@ -271,7 +272,7 @@ }; uart3: uart@24000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart3"; reg = <0x24000 0x2000>; clock-frequency = <48000000>; @@ -331,10 +332,11 @@ ranges = <0 0x140000 0x20000>; scm_conf: scm_conf@0 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x0 0x800>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0 0x800>; scm_clocks: clocks { #address-cells = <1>; @@ -509,7 +511,6 @@ cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; - no_bd_ram = <0>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 61dd2f6b02bc..276211e1ee53 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -12,6 +12,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c1; @@ -372,7 +373,7 @@ }; uart1: uart@48020000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart1"; reg = <0x48020000 0x2000>; clock-frequency = <48000000>; @@ -382,7 +383,7 @@ }; uart2: uart@48022000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart2"; reg = <0x48022000 0x2000>; clock-frequency = <48000000>; @@ -392,7 +393,7 @@ }; uart3: uart@48024000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart3"; reg = <0x48024000 0x2000>; clock-frequency = <48000000>; diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/dove-cm-a510.dtsi index 59b4056b478f..9b9dfbe07be4 100644 --- a/arch/arm/boot/dts/dove-cm-a510.dtsi +++ b/arch/arm/boot/dts/dove-cm-a510.dtsi @@ -13,17 +13,17 @@ * published by the Free Software Foundation; version 2 of the * License. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/dove-sbc-a510.dts b/arch/arm/boot/dts/dove-sbc-a510.dts index 288e707dea99..2bb85a9b7614 100644 --- a/arch/arm/boot/dts/dove-sbc-a510.dts +++ b/arch/arm/boot/dts/dove-sbc-a510.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; version 2 of the * License. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 132f2be10889..4bc4b575c99b 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -21,6 +21,10 @@ reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */ }; + chosen { + stdout-path = &uart1; + }; + evm_3v3_sd: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "evm_3v3_sd"; @@ -151,204 +155,6 @@ }; &dra7_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = <&vtt_pin>; - - vtt_pin: pinmux_vtt_pin { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37b4, PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */ - >; - }; - - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda */ - DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl */ - >; - }; - - i2c2_pins: pinmux_i2c2_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ - DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ - >; - }; - - i2c3_pins: pinmux_i2c3_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3688, PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */ - DRA7XX_CORE_IOPAD(0x368c, PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */ - >; - }; - - mcspi1_pins: pinmux_mcspi1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37a4, PIN_INPUT | MUX_MODE0) /* spi1_sclk */ - DRA7XX_CORE_IOPAD(0x37a8, PIN_INPUT | MUX_MODE0) /* spi1_d1 */ - DRA7XX_CORE_IOPAD(0x37ac, PIN_INPUT | MUX_MODE0) /* spi1_d0 */ - DRA7XX_CORE_IOPAD(0x37b0, PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */ - DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */ - DRA7XX_CORE_IOPAD(0x37bc, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */ - >; - }; - - mcspi2_pins: pinmux_mcspi2_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37c0, PIN_INPUT | MUX_MODE0) /* spi2_sclk */ - DRA7XX_CORE_IOPAD(0x37c4, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ - DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ - DRA7XX_CORE_IOPAD(0x37cc, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */ - >; - }; - - uart1_pins: pinmux_uart1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37e0, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */ - DRA7XX_CORE_IOPAD(0x37e4, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */ - DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT | MUX_MODE3) /* uart1_ctsn */ - DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT | MUX_MODE3) /* uart1_rtsn */ - >; - }; - - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT | MUX_MODE0) /* uart2_rxd */ - DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT | MUX_MODE0) /* uart2_txd */ - DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT | MUX_MODE0) /* uart2_ctsn */ - DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT | MUX_MODE0) /* uart2_rtsn */ - >; - }; - - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ - DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ - >; - }; - - usb1_pins: pinmux_usb1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ - >; - }; - - usb2_pins: pinmux_usb2_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ - >; - }; - - nand_flash_x16: nand_flash_x16 { - /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch - * So NAND flash requires following switch settings: - * SW5.1 (NAND_BOOTn) = ON (LOW) - * SW5.9 (GPMC_WPN) = OFF (HIGH) - */ - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ - DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ - DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ - DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ - DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ - DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ - DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ - DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ - DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ - DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ - DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ - DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ - DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ - DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ - DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ - DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ - DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */ - DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ - DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */ - DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ - DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ - DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */ - >; - }; - - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 1 */ - DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */ - DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */ - DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */ - DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */ - DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */ - DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */ - DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */ - DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */ - DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */ - DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */ - DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */ - DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */ - - /* Slave 2 */ - DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ - DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ - DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ - DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ - DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ - DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ - DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ - DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ - DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ - DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ - DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ - DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ - >; - - }; - - cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 1 */ - DRA7XX_CORE_IOPAD(0x3650, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3654, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3658, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x365c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3660, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3664, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3668, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x366c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3670, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3674, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3678, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x367c, MUX_MODE15) - - /* Slave 2 */ - DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15) - >; - }; - - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ - DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ - >; - }; - - davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15) - >; - }; - dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ @@ -363,36 +169,36 @@ >; }; - atl_pins: pinmux_atl_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ - DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ - >; - }; - - mcasp3_pins: pinmux_mcasp3_pins { + mmc1_pins_default: mmc1_pins_default { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ - DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ - DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ - DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ + DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ >; }; - mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins { + mmc2_pins_default: mmc2_pins_default { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3724, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3728, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x372c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3730, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ >; }; }; &i2c1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; tps659038: tps659038@58 { @@ -581,8 +387,6 @@ &i2c2 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; pcf_hdmi: gpio@26 { @@ -602,45 +406,35 @@ &i2c3 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; }; &mcspi1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcspi1_pins>; }; &mcspi2 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcspi2_pins>; }; &uart1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, <&dra7_pmx_core 0x3e0>; }; &uart2 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; }; &uart3 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; }; &mmc1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; vmmc-supply = <&evm_3v3_sd>; vmmc_aux-supply = <&ldo1_reg>; bus-width = <4>; @@ -653,6 +447,8 @@ &mmc2 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_default>; vmmc-supply = <&evm_3v3_sw>; bus-width = <8>; }; @@ -732,14 +528,10 @@ &usb1 { dr_mode = "peripheral"; - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins>; }; &usb2 { dr_mode = "host"; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_pins>; }; &elm { @@ -747,9 +539,12 @@ }; &gpmc { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&nand_flash_x16>; + /* + * For the existing IOdelay configuration via U-Boot we don't + * support NAND on dra7-evm. Keep it disabled. Enabling it + * requires a different configuration by U-Boot. + */ + status = "disabled"; ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { compatible = "ti,omap2-nand"; @@ -845,9 +640,6 @@ &mac { status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cpsw_default>; - pinctrl-1 = <&cpsw_sleep>; dual_emac; }; @@ -863,12 +655,6 @@ dual_emac_res_vlan = <2>; }; -&davinci_mdio { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&davinci_mdio_default>; - pinctrl-1 = <&davinci_mdio_sleep>; -}; - &dcan1 { status = "ok"; pinctrl-names = "default", "sleep", "active"; @@ -878,9 +664,6 @@ }; &atl { - pinctrl-names = "default"; - pinctrl-0 = <&atl_pins>; - assigned-clocks = <&abe_dpll_sys_clk_mux>, <&atl_gfclk_mux>, <&dpll_abe_ck>, @@ -899,9 +682,6 @@ &mcasp3 { #sound-dai-cells = <0>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&mcasp3_pins>; - pinctrl-1 = <&mcasp3_sleep_pins>; assigned-clocks = <&mcasp3_ahclkx_mux>; assigned-clock-parents = <&atl_clkin2_ck>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index addb7530cfbe..2c9e56f4aac5 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -18,6 +18,7 @@ compatible = "ti,dra7xx"; interrupt-parent = <&crossbar_mpu>; + chosen { }; aliases { i2c0 = &i2c1; @@ -56,7 +57,7 @@ interrupt-controller; #interrupt-cells = <3>; reg = <0x0 0x48211000 0x0 0x1000>, - <0x0 0x48212000 0x0 0x1000>, + <0x0 0x48212000 0x0 0x2000>, <0x0 0x48214000 0x0 0x2000>, <0x0 0x48216000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; @@ -1377,6 +1378,7 @@ phy-names = "sata-phy"; clocks = <&sata_ref_clk>; ti,hwmods = "sata"; + ports-implemented = <0x1>; }; rtc: rtc@48838000 { @@ -1707,7 +1709,6 @@ cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; - no_bd_ram = <0>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index 2b9a5a8d69ad..4d57a55473af 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -138,6 +138,11 @@ }; }; +&pcf_lcd { + interrupt-parent = <&gpio7>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; +}; + &pcf_gpio_21 { interrupt-parent = <&gpio7>; interrupts = <31 IRQ_TYPE_EDGE_FALLING>; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index e50fbeea96e0..ad24544adf0f 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -18,6 +18,10 @@ display0 = &hdmi0; }; + chosen { + stdout-path = &uart1; + }; + evm_12v0: fixedregulator-evm12v0 { /* main supply */ compatible = "regulator-fixed"; @@ -216,6 +220,15 @@ status = "okay"; clock-frequency = <400000>; + pcf_lcd: gpio@20 { + compatible = "nxp,pcf8575"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + pcf_gpio_21: gpio@21 { compatible = "ti,pcf8575", "nxp,pcf8575"; reg = <0x21>; @@ -280,7 +293,12 @@ }; &gpmc { - status = "okay"; + /* + * For the existing IOdelay configuration via U-Boot we don't + * support NAND on dra72-evm. Keep it disabled. Enabling it + * requires a different configuration by U-Boot. + */ + status = "disabled"; ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { /* To use NAND, DIP switch SW5 must be set like so: diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index c3d939c9666c..3ecac56bf504 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -68,6 +68,8 @@ ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; ti,min-output-impedance; + interrupt-parent = <&gpio6>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; }; dp83867_1: ethernet-phy@3 { @@ -75,6 +77,8 @@ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; - ti,min-output-imepdance; + ti,min-output-impedance; + interrupt-parent = <&gpio6>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; }; }; diff --git a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi index ee6dac44edf1..e6df676886c0 100644 --- a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi +++ b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi @@ -132,3 +132,19 @@ ti,palmas-long-press-seconds = <6>; }; }; + +&usb2_phy1 { + phy-supply = <&ldo4_reg>; +}; + +&usb2_phy2 { + phy-supply = <&ldo4_reg>; +}; + +&dss { + vdda_video-supply = <&ldo5_reg>; +}; + +&mmc1 { + vmmc_aux-supply = <&ldo1_reg>; +}; diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts index 2ccbb57fbfa8..c15e7e0c7e08 100644 --- a/arch/arm/boot/dts/ecx-2000.dts +++ b/arch/arm/boot/dts/ecx-2000.dts @@ -99,7 +99,7 @@ interrupt-controller; interrupts = <1 9 0xf04>; reg = <0xfff11000 0x1000>, - <0xfff12000 0x1000>, + <0xfff12000 0x2000>, <0xfff14000 0x2000>, <0xfff16000 0x2000>; }; diff --git a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi index f78c14c82e17..25186ac4188d 100644 --- a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi +++ b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi @@ -17,7 +17,7 @@ mfc_left: region_mfc_left { compatible = "shared-dma-pool"; no-map; - size = <0x1000000>; + size = <0x2400000>; alignment = <0x100000>; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index ba17ee1eb749..9c28ef4508e0 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -234,7 +234,7 @@ #interrupt-cells = <3>; interrupt-controller; reg = <0x10481000 0x1000>, - <0x10482000 0x1000>, + <0x10482000 0x2000>, <0x10484000 0x2000>, <0x10486000 0x2000>; interrupts = <GIC_PPI 9 diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index c64737baa45e..18def1c774d5 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -64,8 +64,10 @@ i2s0: i2s@03830000 { compatible = "samsung,s5pv210-i2s"; reg = <0x03830000 0x100>; - clocks = <&clock_audss EXYNOS_I2S_BUS>; - clock-names = "iis"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; #clock-cells = <1>; clock-output-names = "i2s_cdclk0"; dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>; @@ -100,18 +102,21 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10023C40 0x20>; #power-domain-cells = <0>; + label = "MFC"; }; pd_g3d: g3d-power-domain@10023C60 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C60 0x20>; #power-domain-cells = <0>; + label = "G3D"; }; pd_lcd0: lcd0-power-domain@10023C80 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C80 0x20>; #power-domain-cells = <0>; + label = "LCD0"; }; pd_tv: tv-power-domain@10023C20 { @@ -119,24 +124,28 @@ reg = <0x10023C20 0x20>; #power-domain-cells = <0>; power-domains = <&pd_lcd0>; + label = "TV"; }; pd_cam: cam-power-domain@10023C00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C00 0x20>; #power-domain-cells = <0>; + label = "CAM"; }; pd_gps: gps-power-domain@10023CE0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CE0 0x20>; #power-domain-cells = <0>; + label = "GPS"; }; pd_gps_alive: gps-alive-power-domain@10023D00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023D00 0x20>; #power-domain-cells = <0>; + label = "GPS alive"; }; gic: interrupt-controller@10490000 { @@ -370,19 +379,19 @@ #address-cells = <1>; #size-cells = <0>; port@0 { - reg = <0>; - phys = <&exynos_usbphy 1>; - status = "disabled"; + reg = <0>; + phys = <&exynos_usbphy 1>; + status = "disabled"; }; port@1 { - reg = <1>; - phys = <&exynos_usbphy 2>; - status = "disabled"; + reg = <1>; + phys = <&exynos_usbphy 2>; + status = "disabled"; }; port@2 { - reg = <2>; - phys = <&exynos_usbphy 3>; - status = "disabled"; + reg = <2>; + phys = <&exynos_usbphy 3>; + status = "disabled"; }; }; @@ -396,9 +405,9 @@ #address-cells = <1>; #size-cells = <0>; port@0 { - reg = <0>; - phys = <&exynos_usbphy 1>; - status = "disabled"; + reg = <0>; + phys = <&exynos_usbphy 1>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 7f3a18c8f60f..f9408188f97f 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -86,6 +86,7 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; #power-domain-cells = <0>; + label = "LCD1"; }; l2c: l2-cache-controller@10502000 { diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi deleted file mode 100644 index 538901123d37..000000000000 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Samsung's Exynos4212 SoC device tree source - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung's Exynos4212 SoC device nodes are listed in this file. Exynos4212 - * based board files can include this file and provide values for board specfic - * bindings. - * - * Note: This file does not include device nodes for all the controllers in - * Exynos4212 SoC. As device tree coverage for Exynos4212 increases, additional - * nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include "exynos4x12.dtsi" - -/ { - compatible = "samsung,exynos4212", "samsung,exynos4"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@A00 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0xA00>; - clocks = <&clock CLK_ARM_CLK>; - clock-names = "cpu"; - operating-points-v2 = <&cpu0_opp_table>; - cooling-min-level = <13>; - cooling-max-level = <7>; - #cooling-cells = <2>; /* min followed by max */ - }; - - cpu@A01 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0xA01>; - operating-points-v2 = <&cpu0_opp_table>; - }; - }; - - cpu0_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <900000>; - clock-latency-ns = <200000>; - }; - opp01 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <900000>; - clock-latency-ns = <200000>; - }; - opp02 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <925000>; - clock-latency-ns = <200000>; - }; - opp03 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <950000>; - clock-latency-ns = <200000>; - }; - opp04 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <975000>; - clock-latency-ns = <200000>; - }; - opp05 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = <987500>; - clock-latency-ns = <200000>; - }; - opp06 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1000000>; - clock-latency-ns = <200000>; - }; - opp07 { - opp-hz = /bits/ 64 <900000000>; - opp-microvolt = <1037500>; - clock-latency-ns = <200000>; - }; - opp08 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1087500>; - clock-latency-ns = <200000>; - }; - opp09 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1137500>; - clock-latency-ns = <200000>; - }; - opp10 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1187500>; - clock-latency-ns = <200000>; - }; - opp11 { - opp-hz = /bits/ 64 <1300000000>; - opp-microvolt = <1250000>; - clock-latency-ns = <200000>; - }; - opp12 { - opp-hz = /bits/ 64 <1400000000>; - opp-microvolt = <1287500>; - clock-latency-ns = <200000>; - }; - opp13 { - opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <1350000>; - clock-latency-ns = <200000>; - turbo-mode; - }; - }; -}; - -&combiner { - samsung,combiner-nr = <18>; -}; - -&gic { - cpu-offset = <0x8000>; -}; diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts index 76d87f397178..d66093084dbb 100644 --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -82,17 +82,6 @@ compatible = "simple-audio-card"; simple-audio-card,name = "wm-sound"; - assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, - <&clock_audss EXYNOS_MOUT_I2S>, - <&clock_audss EXYNOS_DOUT_SRP>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>; - assigned-clock-parents = <&clock CLK_FOUT_EPLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-rates = <0>, - <0>, - <112896000>, - <11289600>; - simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&link0_codec>; simple-audio-card,frame-master = <&link0_codec>; @@ -145,6 +134,16 @@ status = "okay"; }; +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_SRP>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-rates = <0>, <0>, <112896000>, <11289600>; +}; + &ehci { status = "okay"; /* In order to reset USB ethernet */ @@ -198,10 +197,6 @@ pinctrl-0 = <&i2s0_bus>; pinctrl-names = "default"; status = "okay"; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; }; &pinctrl_1 { diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 8aa19ba14436..78f118cb73d4 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -43,16 +43,6 @@ sound: sound { compatible = "simple-audio-card"; - assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, - <&clock_audss EXYNOS_MOUT_I2S>, - <&clock_audss EXYNOS_DOUT_SRP>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>; - assigned-clock-parents = <&clock CLK_FOUT_EPLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-rates = <0>, - <0>, - <192000000>, - <19200000>; simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&link0_codec>; @@ -97,11 +87,11 @@ thermal-zones { cpu_thermal: cpu-thermal { cooling-maps { - map0 { + cooling_map0: map0 { /* Corresponds to 800MHz at freq_table */ cooling-device = <&cpu0 7 7>; }; - map1 { + cooling_map1: map1 { /* Corresponds to 200MHz at freq_table */ cooling-device = <&cpu0 13 13>; }; @@ -157,6 +147,16 @@ status = "okay"; }; +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_SRP>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-rates = <0>, <0>, <192000000>, <19200000>; +}; + &cpu0 { cpu0-supply = <&buck2_reg>; }; @@ -503,10 +503,6 @@ pinctrl-0 = <&i2s0_bus>; pinctrl-names = "default"; status = "okay"; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; }; &mixer { diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 99634c54dca9..7504a5aa538e 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -13,6 +13,7 @@ /dts-v1/; #include "exynos4412-odroid-common.dtsi" +#include "exynos4412-prime.dtsi" / { model = "Hardkernel ODROID-U3 board based on Exynos4412"; @@ -47,11 +48,11 @@ cooling-maps { map0 { trip = <&cpu_alert1>; - cooling-device = <&cpu0 7 7>; + cooling-device = <&cpu0 9 9>; }; map1 { trip = <&cpu_alert2>; - cooling-device = <&cpu0 13 13>; + cooling-device = <&cpu0 15 15>; }; map2 { trip = <&cpu_alert0>; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 153a75fe6e24..46b931eec228 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -100,3 +100,16 @@ &serial_3 { status = "okay"; }; + +&sound { + simple-audio-card,name = "Odroid-X"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Microphone", "Mic Jack", + "Microphone", "DMIC"; + simple-audio-card,routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "IN1", "Mic Jack", + "Mic Jack", "MICBIAS"; +}; diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts index 4d228858f172..d867b2ee95ca 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx2.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts @@ -12,6 +12,7 @@ */ #include "exynos4412-odroidx.dts" +#include "exynos4412-prime.dtsi" / { model = "Hardkernel ODROID-X2 board based on Exynos4412"; @@ -22,27 +23,3 @@ reg = <0x40000000 0x7FF00000>; }; }; - -/* VDDQ for MSHC (eMMC card) */ -&buck8_reg { - regulator-name = "BUCK8_VDDQ_MMC4_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; -}; - -&mshc_0 { - vqmmc-supply = <&buck8_reg>; -}; - -&sound { - simple-audio-card,name = "Odroid-X2"; - simple-audio-card,widgets = - "Headphone", "Headphone Jack", - "Microphone", "Mic Jack", - "Microphone", "DMIC"; - simple-audio-card,routing = - "Headphone Jack", "HPL", - "Headphone Jack", "HPR", - "IN1", "Mic Jack", - "Mic Jack", "MICBIAS"; -}; diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi index 2f866f6e5838..1d27c28564e4 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi @@ -1,10 +1,10 @@ /* - * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source + * Samsung's Exynos4412 SoCs pin-mux and pin-config device tree source * * Copyright (c) 2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device + * Samsung's Exynos4412 SoCs pin-mux and pin-config optiosn are listed as device * tree nodes are listed in this file. * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/exynos4412-prime.dtsi new file mode 100644 index 000000000000..e75bc170c89c --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-prime.dtsi @@ -0,0 +1,41 @@ +/* + * Samsung's Exynos4412 Prime SoC device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Exynos4412 Prime SoC revision supports higher CPU frequencies than + * non-Prime version. Therefore we need to update OPPs table and + * thermal maps accordingly. + */ + +&cpu0_opp_1500 { + /delete-property/turbo-mode; +}; + +&cpu0_opp_table { + opp@1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <1350000>; + clock-latency-ns = <200000>; + }; + opp@1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <1350000>; + clock-latency-ns = <200000>; + }; +}; + +&cooling_map0 { + cooling-device = <&cpu0 9 9>; +}; + +&cooling_map1 { + cooling-device = <&cpu0 15 15>; +}; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 40beede46e55..235bbb69ad7c 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -17,11 +17,23 @@ * published by the Free Software Foundation. */ -#include "exynos4x12.dtsi" +#include "exynos4.dtsi" +#include "exynos4412-pinctrl.dtsi" +#include "exynos4-cpu-thermal.dtsi" / { compatible = "samsung,exynos4412", "samsung,exynos4"; + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; + fimc-lite0 = &fimc_lite_0; + fimc-lite1 = &fimc_lite_1; + mshc0 = &mshc_0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -130,7 +142,7 @@ opp-microvolt = <1287500>; clock-latency-ns = <200000>; }; - opp@1500000000 { + cpu0_opp_1500: opp@1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1350000>; clock-latency-ns = <200000>; @@ -138,19 +150,573 @@ }; }; + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x40000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@2f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x2f000 0x1000>; + }; + }; + + pd_isp: isp-power-domain@10023CA0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CA0 0x20>; + #power-domain-cells = <0>; + label = "ISP"; + }; + + l2c: l2-cache-controller@10502000 { + compatible = "arm,pl310-cache"; + reg = <0x10502000 0x1000>; + cache-unified; + cache-level = <2>; + arm,tag-latency = <2 2 1>; + arm,data-latency = <3 2 1>; + arm,double-linefill = <1>; + arm,double-linefill-incr = <0>; + arm,double-linefill-wrap = <1>; + arm,prefetch-drop = <1>; + arm,prefetch-offset = <7>; + }; + + clock: clock-controller@10030000 { + compatible = "samsung,exynos4412-clock"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + + mct@10050000 { + compatible = "samsung,exynos4412-mct"; + reg = <0x10050000 0x800>; + interrupt-parent = <&mct_map>; + interrupts = <0>, <1>, <2>, <3>, <4>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, + <1 &combiner 12 5>, + <2 &combiner 12 6>, + <3 &combiner 12 7>, + <4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + adc: adc@126C0000 { + compatible = "samsung,exynos-adc-v1"; + reg = <0x126C0000 0x100>; + interrupt-parent = <&combiner>; + interrupts = <10 3>; + clocks = <&clock CLK_TSADC>; + clock-names = "adc"; + #io-channel-cells = <1>; + io-channel-ranges; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + }; + + g2d: g2d@10800000 { + compatible = "samsung,exynos4212-g2d"; + reg = <0x10800000 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; + clock-names = "sclk_fimg2d", "fimg2d"; + iommus = <&sysmmu_g2d>; + }; + + camera { + clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>, + <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; + clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; + + /* fimc_[0-3] are configured outside, under phandles */ + fimc_lite_0: fimc-lite@12390000 { + compatible = "samsung,exynos4212-fimc-lite"; + reg = <0x12390000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_isp>; + clocks = <&clock CLK_FIMC_LITE0>; + clock-names = "flite"; + iommus = <&sysmmu_fimc_lite0>; + status = "disabled"; + }; + + fimc_lite_1: fimc-lite@123A0000 { + compatible = "samsung,exynos4212-fimc-lite"; + reg = <0x123A0000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_isp>; + clocks = <&clock CLK_FIMC_LITE1>; + clock-names = "flite"; + iommus = <&sysmmu_fimc_lite1>; + status = "disabled"; + }; + + fimc_is: fimc-is@12000000 { + compatible = "samsung,exynos4212-fimc-is"; + reg = <0x12000000 0x260000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_isp>; + clocks = <&clock CLK_FIMC_LITE0>, + <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>, + <&clock CLK_PPMUISPMX>, + <&clock CLK_MOUT_MPLL_USER_T>, + <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>, + <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>, + <&clock CLK_GICISP>, <&clock CLK_MCUCTL_ISP>, + <&clock CLK_PWM_ISP>, + <&clock CLK_DIV_ISP0>, <&clock CLK_DIV_ISP1>, + <&clock CLK_DIV_MCUISP0>, + <&clock CLK_DIV_MCUISP1>, + <&clock CLK_UART_ISP_SCLK>, + <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>, + <&clock CLK_ACLK400_MCUISP>, + <&clock CLK_DIV_ACLK400_MCUISP>; + clock-names = "lite0", "lite1", "ppmuispx", + "ppmuispmx", "mpll", "isp", + "drc", "fd", "mcuisp", + "gicisp", "mcuctl_isp", "pwm_isp", + "ispdiv0", "ispdiv1", "mcuispdiv0", + "mcuispdiv1", "uart", "aclk200", + "div_aclk200", "aclk400mcuisp", + "div_aclk400mcuisp"; + iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>, + <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; + iommu-names = "isp", "drc", "fd", "mcuctl"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + pmu@10020000 { + reg = <0x10020000 0x3000>; + }; + + i2c1_isp: i2c-isp@12140000 { + compatible = "samsung,exynos4212-i2c-isp"; + reg = <0x12140000 0x100>; + clocks = <&clock CLK_I2C1_ISP>; + clock-names = "i2c_isp"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + mshc_0: mmc@12550000 { + compatible = "samsung,exynos4412-dw-mshc"; + reg = <0x12550000 0x1000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <0x80>; + clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>; + clock-names = "biu", "ciu"; + status = "disabled"; + }; + + sysmmu_g2d: sysmmu@10A40000{ + compatible = "samsung,exynos-sysmmu"; + reg = <0x10A40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 7>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_isp: sysmmu@12260000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12260000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 2>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_ISP>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_drc: sysmmu@12270000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12270000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 3>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_DRC>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_fd: sysmmu@122A0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x122A0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 4>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FD>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_mcuctl: sysmmu@122B0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x122B0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 5>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_ISPCX>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_lite0: sysmmu@123B0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x123B0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 0>; + power-domains = <&pd_isp>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_LITE0>, <&clock CLK_FIMC_LITE0>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_lite1: sysmmu@123C0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x123C0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 1>; + power-domains = <&pd_isp>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_LITE1>, <&clock CLK_FIMC_LITE1>; + #iommu-cells = <0>; + }; + + bus_dmc: bus_dmc { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_DMC>; + clock-names = "bus"; + operating-points-v2 = <&bus_dmc_opp_table>; + status = "disabled"; + }; + + bus_acp: bus_acp { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_ACP>; + clock-names = "bus"; + operating-points-v2 = <&bus_acp_opp_table>; + status = "disabled"; + }; + + bus_c2c: bus_c2c { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_C2C>; + clock-names = "bus"; + operating-points-v2 = <&bus_dmc_opp_table>; + status = "disabled"; + }; + + bus_dmc_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <900000>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + opp-microvolt = <900000>; + }; + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <900000>; + }; + opp@267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <950000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1050000>; + }; + }; + + bus_acp_opp_table: opp_table2 { + compatible = "operating-points-v2"; + opp-shared; + + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + }; + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + }; + opp@267000000 { + opp-hz = /bits/ 64 <267000000>; + }; + }; + + bus_leftbus: bus_leftbus { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_GDL>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_rightbus: bus_rightbus { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_GDR>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_display: bus_display { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_ACLK160>; + clock-names = "bus"; + operating-points-v2 = <&bus_display_opp_table>; + status = "disabled"; + }; + + bus_fsys: bus_fsys { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_ACLK133>; + clock-names = "bus"; + operating-points-v2 = <&bus_fsys_opp_table>; + status = "disabled"; + }; + + bus_peri: bus_peri { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_ACLK100>; + clock-names = "bus"; + operating-points-v2 = <&bus_peri_opp_table>; + status = "disabled"; + }; + + bus_mfc: bus_mfc { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_SCLK_MFC>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_leftbus_opp_table: opp_table3 { + compatible = "operating-points-v2"; + opp-shared; + + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <900000>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + opp-microvolt = <925000>; + }; + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <950000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <1000000>; + }; + }; + + bus_display_opp_table: opp_table4 { + compatible = "operating-points-v2"; + opp-shared; + + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + }; + + bus_fsys_opp_table: opp_table5 { + compatible = "operating-points-v2"; + opp-shared; + + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + }; + }; + + bus_peri_opp_table: opp_table6 { + compatible = "operating-points-v2"; + opp-shared; + + opp@50000000 { + opp-hz = /bits/ 64 <50000000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + }; + pmu { interrupts = <2 2>, <3 2>, <18 2>, <19 2>; }; }; -&pmu_system_controller { - compatible = "samsung,exynos4412-pmu", "syscon"; -}; - &combiner { samsung,combiner-nr = <20>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; +}; + +&exynos_usbphy { + compatible = "samsung,exynos4x12-usb2-phy"; + samsung,sysreg-phandle = <&sys_reg>; +}; + +&fimc_0 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; +}; + +&fimc_1 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; +}; + +&fimc_2 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,lcd-wb; + samsung,cam-if; +}; + +&fimc_3 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <1920 8192 1366 1920>; + samsung,rotators = <0>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,lcd-wb; }; &gic { cpu-offset = <0x4000>; }; + +&hdmi { + compatible = "samsung,exynos4212-hdmi"; +}; + +&jpeg_codec { + compatible = "samsung,exynos4212-jpeg"; +}; + +&rotator { + compatible = "samsung,exynos4212-rotator"; +}; + +&mixer { + compatible = "samsung,exynos4212-mixer"; + clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; +}; + +&pinctrl_0 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; +}; + +&pinctrl_1 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&pinctrl_2 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x03860000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 0>; +}; + +&pinctrl_3 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x106E0000 0x1000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; +}; + +&pmu_system_controller { + compatible = "samsung,exynos4412-pmu", "syscon"; + clock-names = "clkout0", "clkout1", "clkout2", "clkout3", + "clkout4", "clkout8", "clkout9"; + clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, + <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, + <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>; + #clock-cells = <1>; +}; + +&tmu { + compatible = "samsung,exynos4412-tmu"; + interrupt-parent = <&combiner>; + interrupts = <2 4>; + reg = <0x100C0000 0x100>; + clocks = <&clock 383>; + clock-names = "tmu_apbif"; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi deleted file mode 100644 index 85a7122658f1..000000000000 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ /dev/null @@ -1,594 +0,0 @@ -/* - * Samsung's Exynos4x12 SoCs device tree source - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung's Exynos4x12 SoCs device nodes are listed in this file. Exynos4x12 - * based board files can include this file and provide values for board specfic - * bindings. - * - * Note: This file does not include device nodes for all the controllers in - * Exynos4x12 SoC. As device tree coverage for Exynos4x12 increases, additional - * nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include "exynos4.dtsi" -#include "exynos4x12-pinctrl.dtsi" -#include "exynos4-cpu-thermal.dtsi" - -/ { - aliases { - pinctrl0 = &pinctrl_0; - pinctrl1 = &pinctrl_1; - pinctrl2 = &pinctrl_2; - pinctrl3 = &pinctrl_3; - fimc-lite0 = &fimc_lite_0; - fimc-lite1 = &fimc_lite_1; - mshc0 = &mshc_0; - }; - - sysram@02020000 { - compatible = "mmio-sram"; - reg = <0x02020000 0x40000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x02020000 0x40000>; - - smp-sysram@0 { - compatible = "samsung,exynos4210-sysram"; - reg = <0x0 0x1000>; - }; - - smp-sysram@2f000 { - compatible = "samsung,exynos4210-sysram-ns"; - reg = <0x2f000 0x1000>; - }; - }; - - pd_isp: isp-power-domain@10023CA0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10023CA0 0x20>; - #power-domain-cells = <0>; - }; - - l2c: l2-cache-controller@10502000 { - compatible = "arm,pl310-cache"; - reg = <0x10502000 0x1000>; - cache-unified; - cache-level = <2>; - arm,tag-latency = <2 2 1>; - arm,data-latency = <3 2 1>; - arm,double-linefill = <1>; - arm,double-linefill-incr = <0>; - arm,double-linefill-wrap = <1>; - arm,prefetch-drop = <1>; - arm,prefetch-offset = <7>; - }; - - clock: clock-controller@10030000 { - compatible = "samsung,exynos4412-clock"; - reg = <0x10030000 0x20000>; - #clock-cells = <1>; - }; - - mct@10050000 { - compatible = "samsung,exynos4412-mct"; - reg = <0x10050000 0x800>; - interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; - clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, - <1 &combiner 12 5>, - <2 &combiner 12 6>, - <3 &combiner 12 7>, - <4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - adc: adc@126C0000 { - compatible = "samsung,exynos-adc-v1"; - reg = <0x126C0000 0x100>; - interrupt-parent = <&combiner>; - interrupts = <10 3>; - clocks = <&clock CLK_TSADC>; - clock-names = "adc"; - #io-channel-cells = <1>; - io-channel-ranges; - samsung,syscon-phandle = <&pmu_system_controller>; - status = "disabled"; - }; - - g2d: g2d@10800000 { - compatible = "samsung,exynos4212-g2d"; - reg = <0x10800000 0x1000>; - interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; - clock-names = "sclk_fimg2d", "fimg2d"; - iommus = <&sysmmu_g2d>; - }; - - camera { - clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>, - <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; - clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; - - /* fimc_[0-3] are configured outside, under phandles */ - fimc_lite_0: fimc-lite@12390000 { - compatible = "samsung,exynos4212-fimc-lite"; - reg = <0x12390000 0x1000>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&pd_isp>; - clocks = <&clock CLK_FIMC_LITE0>; - clock-names = "flite"; - iommus = <&sysmmu_fimc_lite0>; - status = "disabled"; - }; - - fimc_lite_1: fimc-lite@123A0000 { - compatible = "samsung,exynos4212-fimc-lite"; - reg = <0x123A0000 0x1000>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&pd_isp>; - clocks = <&clock CLK_FIMC_LITE1>; - clock-names = "flite"; - iommus = <&sysmmu_fimc_lite1>; - status = "disabled"; - }; - - fimc_is: fimc-is@12000000 { - compatible = "samsung,exynos4212-fimc-is"; - reg = <0x12000000 0x260000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&pd_isp>; - clocks = <&clock CLK_FIMC_LITE0>, - <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>, - <&clock CLK_PPMUISPMX>, - <&clock CLK_MOUT_MPLL_USER_T>, - <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>, - <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>, - <&clock CLK_GICISP>, <&clock CLK_MCUCTL_ISP>, - <&clock CLK_PWM_ISP>, - <&clock CLK_DIV_ISP0>, <&clock CLK_DIV_ISP1>, - <&clock CLK_DIV_MCUISP0>, - <&clock CLK_DIV_MCUISP1>, - <&clock CLK_UART_ISP_SCLK>, - <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>, - <&clock CLK_ACLK400_MCUISP>, - <&clock CLK_DIV_ACLK400_MCUISP>; - clock-names = "lite0", "lite1", "ppmuispx", - "ppmuispmx", "mpll", "isp", - "drc", "fd", "mcuisp", - "gicisp", "mcuctl_isp", "pwm_isp", - "ispdiv0", "ispdiv1", "mcuispdiv0", - "mcuispdiv1", "uart", "aclk200", - "div_aclk200", "aclk400mcuisp", - "div_aclk400mcuisp"; - iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>, - <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; - iommu-names = "isp", "drc", "fd", "mcuctl"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - status = "disabled"; - - pmu@10020000 { - reg = <0x10020000 0x3000>; - }; - - i2c1_isp: i2c-isp@12140000 { - compatible = "samsung,exynos4212-i2c-isp"; - reg = <0x12140000 0x100>; - clocks = <&clock CLK_I2C1_ISP>; - clock-names = "i2c_isp"; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - }; - - mshc_0: mmc@12550000 { - compatible = "samsung,exynos4412-dw-mshc"; - reg = <0x12550000 0x1000>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - fifo-depth = <0x80>; - clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>; - clock-names = "biu", "ciu"; - status = "disabled"; - }; - - sysmmu_g2d: sysmmu@10A40000{ - compatible = "samsung,exynos-sysmmu"; - reg = <0x10A40000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <4 7>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_isp: sysmmu@12260000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x12260000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 2>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_ISP>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_drc: sysmmu@12270000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x12270000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 3>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_DRC>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_fd: sysmmu@122A0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x122A0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 4>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FD>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_mcuctl: sysmmu@122B0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x122B0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 5>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_ISPCX>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_lite0: sysmmu@123B0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x123B0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 0>; - power-domains = <&pd_isp>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_LITE0>, <&clock CLK_FIMC_LITE0>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_lite1: sysmmu@123C0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x123C0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 1>; - power-domains = <&pd_isp>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_LITE1>, <&clock CLK_FIMC_LITE1>; - #iommu-cells = <0>; - }; - - bus_dmc: bus_dmc { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_DMC>; - clock-names = "bus"; - operating-points-v2 = <&bus_dmc_opp_table>; - status = "disabled"; - }; - - bus_acp: bus_acp { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_ACP>; - clock-names = "bus"; - operating-points-v2 = <&bus_acp_opp_table>; - status = "disabled"; - }; - - bus_c2c: bus_c2c { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_C2C>; - clock-names = "bus"; - operating-points-v2 = <&bus_dmc_opp_table>; - status = "disabled"; - }; - - bus_dmc_opp_table: opp_table1 { - compatible = "operating-points-v2"; - opp-shared; - - opp@100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <900000>; - }; - opp@134000000 { - opp-hz = /bits/ 64 <134000000>; - opp-microvolt = <900000>; - }; - opp@160000000 { - opp-hz = /bits/ 64 <160000000>; - opp-microvolt = <900000>; - }; - opp@267000000 { - opp-hz = /bits/ 64 <267000000>; - opp-microvolt = <950000>; - }; - opp@400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <1050000>; - }; - }; - - bus_acp_opp_table: opp_table2 { - compatible = "operating-points-v2"; - opp-shared; - - opp@100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - opp@134000000 { - opp-hz = /bits/ 64 <134000000>; - }; - opp@160000000 { - opp-hz = /bits/ 64 <160000000>; - }; - opp@267000000 { - opp-hz = /bits/ 64 <267000000>; - }; - }; - - bus_leftbus: bus_leftbus { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_GDL>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_rightbus: bus_rightbus { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_GDR>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_display: bus_display { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK160>; - clock-names = "bus"; - operating-points-v2 = <&bus_display_opp_table>; - status = "disabled"; - }; - - bus_fsys: bus_fsys { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK133>; - clock-names = "bus"; - operating-points-v2 = <&bus_fsys_opp_table>; - status = "disabled"; - }; - - bus_peri: bus_peri { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK100>; - clock-names = "bus"; - operating-points-v2 = <&bus_peri_opp_table>; - status = "disabled"; - }; - - bus_mfc: bus_mfc { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_SCLK_MFC>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_leftbus_opp_table: opp_table3 { - compatible = "operating-points-v2"; - opp-shared; - - opp@100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <900000>; - }; - opp@134000000 { - opp-hz = /bits/ 64 <134000000>; - opp-microvolt = <925000>; - }; - opp@160000000 { - opp-hz = /bits/ 64 <160000000>; - opp-microvolt = <950000>; - }; - opp@200000000 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <1000000>; - }; - }; - - bus_display_opp_table: opp_table4 { - compatible = "operating-points-v2"; - opp-shared; - - opp@160000000 { - opp-hz = /bits/ 64 <160000000>; - }; - opp@200000000 { - opp-hz = /bits/ 64 <200000000>; - }; - }; - - bus_fsys_opp_table: opp_table5 { - compatible = "operating-points-v2"; - opp-shared; - - opp@100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - opp@134000000 { - opp-hz = /bits/ 64 <134000000>; - }; - }; - - bus_peri_opp_table: opp_table6 { - compatible = "operating-points-v2"; - opp-shared; - - opp@50000000 { - opp-hz = /bits/ 64 <50000000>; - }; - opp@100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - }; -}; - -&combiner { - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; -}; - -&exynos_usbphy { - compatible = "samsung,exynos4x12-usb2-phy"; - samsung,sysreg-phandle = <&sys_reg>; -}; - -&fimc_0 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,cam-if; -}; - -&fimc_1 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,cam-if; -}; - -&fimc_2 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,lcd-wb; - samsung,cam-if; -}; - -&fimc_3 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <1920 8192 1366 1920>; - samsung,rotators = <0>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,lcd-wb; -}; - -&hdmi { - compatible = "samsung,exynos4212-hdmi"; -}; - -&jpeg_codec { - compatible = "samsung,exynos4212-jpeg"; -}; - -&rotator { - compatible = "samsung,exynos4212-rotator"; -}; - -&mixer { - compatible = "samsung,exynos4212-mixer"; - clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; - clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, - <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; -}; - -&pinctrl_0 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x11400000 0x1000>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; -}; - -&pinctrl_1 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x11000000 0x1000>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - - wakup_eint: wakeup-interrupt-controller { - compatible = "samsung,exynos4210-wakeup-eint"; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - }; -}; - -&pinctrl_2 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x03860000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <10 0>; -}; - -&pinctrl_3 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x106E0000 0x1000>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; -}; - -&pmu_system_controller { - compatible = "samsung,exynos4212-pmu", "syscon"; - clock-names = "clkout0", "clkout1", "clkout2", "clkout3", - "clkout4", "clkout8", "clkout9"; - clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, - <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, - <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>; - #clock-cells = <1>; -}; - -&tmu { - compatible = "samsung,exynos4412-tmu"; - interrupt-parent = <&combiner>; - interrupts = <2 4>; - reg = <0x100C0000 0x100>; - clocks = <&clock 383>; - clock-names = "tmu_apbif"; - status = "disabled"; -}; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 7fd870ee5093..b74c5379ca26 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -90,11 +90,11 @@ }; gic: interrupt-controller@10481000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + compatible = "arm,gic-400", "arm,cortex-a15-gic", "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x10481000 0x1000>, - <0x10482000 0x1000>, + <0x10482000 0x2000>, <0x10484000 0x2000>, <0x10486000 0x2000>; interrupts = <GIC_PPI 9 diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index b6d7444d8585..79c9c885613a 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -115,18 +115,21 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; #power-domain-cells = <0>; + label = "GSC"; }; pd_mfc: mfc-power-domain@10044040 { compatible = "samsung,exynos4210-pd"; reg = <0x10044040 0x20>; #power-domain-cells = <0>; + label = "MFC"; }; pd_disp1: disp1-power-domain@100440A0 { compatible = "samsung,exynos4210-pd"; reg = <0x100440A0 0x20>; #power-domain-cells = <0>; + label = "DISP1"; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_ACLK200_DISP1_SUB>, <&clock CLK_MOUT_ACLK300_DISP1_SUB>; @@ -1043,21 +1046,29 @@ &serial_0 { clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 13>, <&pdma0 14>; + dma-names = "rx", "tx"; }; &serial_1 { clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 15>, <&pdma1 16>; + dma-names = "rx", "tx"; }; &serial_2 { clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 15>, <&pdma0 16>; + dma-names = "rx", "tx"; }; &serial_3 { clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 17>, <&pdma1 18>; + dma-names = "rx", "tx"; }; #include "exynos5250-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi index 5818718618b1..5e88c9645975 100644 --- a/arch/arm/boot/dts/exynos5260.dtsi +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -167,7 +167,7 @@ #size-cells = <0>; interrupt-controller; reg = <0x10481000 0x1000>, - <0x10482000 0x1000>, + <0x10482000 0x2000>, <0x10484000 0x2000>, <0x10486000 0x2000>; interrupts = <GIC_PPI 9 diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 2b6adafe18e2..7eab4bc07cec 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -340,21 +340,29 @@ &serial_0 { clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 13>, <&pdma0 14>; + dma-names = "rx", "tx"; }; &serial_1 { clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 15>, <&pdma1 16>; + dma-names = "rx", "tx"; }; &serial_2 { clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 15>, <&pdma0 16>; + dma-names = "rx", "tx"; }; &serial_3 { clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 17>, <&pdma1 18>; + dma-names = "rx", "tx"; }; &sss { diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 906a1a42a7ea..7dc9dc82afd8 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -277,6 +277,7 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; #power-domain-cells = <0>; + label = "GSC"; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK300_GSCL>, <&clock CLK_GSCL0>, <&clock CLK_GSCL1>; @@ -287,6 +288,7 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10044020 0x20>; #power-domain-cells = <0>; + label = "ISP"; }; mfc_pd: power-domain@10044060 { @@ -297,18 +299,21 @@ <&clock CLK_ACLK333>; clock-names = "oscclk", "clk0","asb0"; #power-domain-cells = <0>; + label = "MFC"; }; msc_pd: power-domain@10044120 { compatible = "samsung,exynos4210-pd"; reg = <0x10044120 0x20>; #power-domain-cells = <0>; + label = "MSC"; }; disp_pd: power-domain@100440C0 { compatible = "samsung,exynos4210-pd"; reg = <0x100440C0 0x20>; #power-domain-cells = <0>; + label = "DISP"; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK200_DISP1>, <&clock CLK_MOUT_USER_ACLK300_DISP1>, @@ -1406,21 +1411,29 @@ &serial_0 { clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 13>, <&pdma0 14>; + dma-names = "rx", "tx"; }; &serial_1 { clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 15>, <&pdma1 16>; + dma-names = "rx", "tx"; }; &serial_2 { clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 15>, <&pdma0 16>; + dma-names = "rx", "tx"; }; &serial_3 { clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 17>, <&pdma1 18>; + dma-names = "rx", "tx"; }; &sss { diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 2a2e570bbee6..77d35bb92950 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -40,7 +40,7 @@ #interrupt-cells = <3>; interrupt-controller; reg = <0x2E1000 0x1000>, - <0x2E2000 0x1000>, + <0x2E2000 0x2000>, <0x2E4000 0x2000>, <0x2E6000 0x2000>; interrupts = <GIC_PPI 9 diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts index f50498659cc3..5ea28ee07cf4 100644 --- a/arch/arm/boot/dts/imx1-ads.dts +++ b/arch/arm/boot/dts/imx1-ads.dts @@ -38,7 +38,6 @@ &cspi1 { pinctrl-0 = <&pinctrl_cspi1>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi index b792eee3899b..38d712be5685 100644 --- a/arch/arm/boot/dts/imx1.dtsi +++ b/arch/arm/boot/dts/imx1.dtsi @@ -18,6 +18,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { gpio0 = &gpio1; @@ -43,8 +51,9 @@ #size-cells = <0>; #address-cells = <1>; - cpu: cpu@0 { + cpu@0 { device_type = "cpu"; + reg = <0>; compatible = "arm,arm920t"; operating-points = <200000 1900000>; clock-latency = <62500>; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index ac2a9da62b6c..10d57f9cbb42 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -16,6 +16,14 @@ #size-cells = <1>; interrupt-parent = <&icoll>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { gpio0 = &gpio0; @@ -29,12 +37,13 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 831d09a28155..e0ba55016a04 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -14,6 +14,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; @@ -43,12 +51,13 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; @@ -560,7 +569,7 @@ reg = <0x53ffc000 0x4000>; clocks = <&clks 81>; clock-names = "ipg"; - interrupts = <25>; + interrupts = <25 56>; }; }; diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts index bba3f41b89ef..5f84b598e0d0 100644 --- a/arch/arm/boot/dts/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -77,7 +77,6 @@ }; &cspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>; @@ -95,7 +94,6 @@ }; &cspi2 { - fsl,spi-num-chipselects = <3>; cs-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>, <&gpio4 27 GPIO_ACTIVE_LOW>, <&gpio2 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts index 27846ff9bb0d..f56535768ee8 100644 --- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts +++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts @@ -81,7 +81,6 @@ &cspi1 { pinctrl-0 = <&pinctrl_cspi1>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts index d0ef496a1af8..96f442ba6d22 100644 --- a/arch/arm/boot/dts/imx27-pdk.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -37,7 +37,6 @@ &cspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi2>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi index 1b6248079682..4f3e0f473581 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi @@ -23,7 +23,6 @@ }; &cspi1 { - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>, <&gpio4 27 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index cf09e72aeb06..2a9198f99a8d 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -69,7 +69,6 @@ &cspi1 { pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>; - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>, <&gpio4 27 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index b4e955e3be8d..82fec935ce83 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -75,7 +75,6 @@ &cspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi1>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 9d8b5969ee3b..15d85f1f85fd 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -19,6 +19,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; @@ -65,6 +73,7 @@ cpu: cpu@0 { device_type = "cpu"; + reg = <0>; compatible = "arm,arm926ej-s"; operating-points = < /* kHz uV */ diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 3aabf65a6a52..148fcf4d3b98 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -17,6 +17,14 @@ #size-cells = <1>; interrupt-parent = <&icoll>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &mac0; @@ -40,12 +48,13 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; @@ -1070,6 +1079,7 @@ }; saif0: saif@80042000 { + #sound-dai-cells = <0>; compatible = "fsl,imx28-saif"; reg = <0x80042000 0x2000>; interrupts = <59>; @@ -1086,6 +1096,7 @@ }; saif1: saif@80046000 { + #sound-dai-cells = <0>; compatible = "fsl,imx28-saif"; reg = <0x80046000 0x2000>; interrupts = <58>; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 685916e3d8a1..a72031407ebd 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -12,6 +12,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { serial0 = &uart1; @@ -22,20 +30,21 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm1136jf-s"; device_type = "cpu"; + reg = <0>; }; }; - avic: avic-interrupt-controller@60000000 { + avic: interrupt-controller@68000000 { compatible = "fsl,imx31-avic", "fsl,avic"; interrupt-controller; #interrupt-cells = <1>; - reg = <0x60000000 0x100000>; + reg = <0x68000000 0x100000>; }; soc { diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 9f40e6229189..6d5e6a60bee7 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -13,6 +13,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; @@ -27,12 +35,13 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm1136jf-s"; device_type = "cpu"; + reg = <0>; }; }; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index 27d763c7a307..dba2d951aa15 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -26,7 +26,6 @@ &cspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi>; - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index fe0221e4cbf7..ceae909e2201 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -17,6 +17,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts index 0f3fe29b816e..a5e6091c8729 100644 --- a/arch/arm/boot/dts/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -80,7 +80,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, <&gpio4 25 GPIO_ACTIVE_HIGH>; status = "okay"; @@ -89,7 +88,6 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>, <&gpio3 27 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index f097b4f29ab4..873cf242679c 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -178,7 +178,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, <&gpio4 25 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi index 16fc69c69ab2..b821066a0d2a 100644 --- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi +++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi @@ -24,7 +24,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index 728212861ece..1305b05c7ed9 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -114,7 +114,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 33526cade735..1ee1d542d9ad 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -19,6 +19,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index c05e7cfd0cbc..40b3e31935d0 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -215,16 +215,16 @@ pinctrl_fec: fecgrp { fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + MX53_PAD_FEC_MDC__FEC_MDC 0x4 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 >; }; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index 379939699164..f4c158cce908 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -90,7 +90,6 @@ ldo7_reg: ldo7 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; - regulator-always-on; }; ldo8_reg: ldo8 { @@ -113,3 +112,7 @@ }; }; }; + +&tve { + dac-supply = <&ldo7_reg>; +}; diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts index 96d7eede412e..479ca4c9e384 100644 --- a/arch/arm/boot/dts/imx53-qsrb.dts +++ b/arch/arm/boot/dts/imx53-qsrb.dts @@ -130,8 +130,6 @@ regulator-name = "VDAC"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2775000>; - regulator-boot-on; - regulator-always-on; }; vgen1_reg: vgen1 { @@ -152,3 +150,7 @@ }; }; }; + +&tve { + dac-supply = <&vdac_reg>; +}; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 9f5190040555..472f6f0f55b3 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -63,7 +63,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index 91a6a9ff50d7..85972f2201c2 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -55,7 +55,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <4>; cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio3 24 0>, <&gpio3 25 0>; status = "disabled"; @@ -249,7 +248,6 @@ &cspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi>; - fsl,spi-num-chipselects = <3>; cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>, <&gpio1 21 0>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 57e75f1639e0..3a3220141988 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -161,7 +161,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <2>; status = "okay"; cs-gpios = < diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi index ba689fbd0e41..524192cf6a0f 100644 --- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi +++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi @@ -129,7 +129,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <4>; cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index ca51dc03e327..2e516f4985e4 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -19,6 +19,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts index bb92f309c191..0677625463d6 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts index 3d5ad2cc7e22..805b1318b7f7 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index d4c4a22db488..32a812b1839e 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -66,7 +66,6 @@ }; &ecspi2 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index e0c21727866d..26541538562c 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-cubox-i.dts b/arch/arm/boot/dts/imx6dl-cubox-i.dts index 2a43917d048e..f10a36b8647d 100644 --- a/arch/arm/boot/dts/imx6dl-cubox-i.dts +++ b/arch/arm/boot/dts/imx6dl-cubox-i.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index d5c966031962..39c2602fa87c 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-icore-rqs.dts b/arch/arm/boot/dts/imx6dl-icore-rqs.dts new file mode 100644 index 000000000000..cf42c2f5cdc7 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-icore-rqs.dts @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-icore-rqs.dtsi" + +/ { + model = "Engicam i.CoreM6 DualLite/Solo RQS Starter Kit"; + compatible = "engicam,imx6-icore-rqs", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts index aec332c14af1..6de83c72bd72 100644 --- a/arch/arm/boot/dts/imx6dl-icore.dts +++ b/arch/arm/boot/dts/imx6dl-icore.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts index e0161e46195c..30ce2c0cec2b 100644 --- a/arch/arm/boot/dts/imx6dl-nit6xlite.dts +++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts index 8398f979b912..ec53d7a09572 100644 --- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts index 0f06ca5c9146..2f904527a097 100644 --- a/arch/arm/boot/dts/imx6dl-sabrelite.dts +++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-savageboard.dts b/arch/arm/boot/dts/imx6dl-savageboard.dts new file mode 100644 index 000000000000..b95469c520a4 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-savageboard.dts @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-savageboard.dtsi" + +/ { + model = "Poslab SavageBoard Dual"; + compatible = "poslab,imx6dl-savageboard", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-ts4900.dts b/arch/arm/boot/dts/imx6dl-ts4900.dts index 85eddeb30e21..6ea0b780677d 100644 --- a/arch/arm/boot/dts/imx6dl-ts4900.dts +++ b/arch/arm/boot/dts/imx6dl-ts4900.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 1ade1951e620..7aa120fbdc71 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -137,7 +137,7 @@ &gpio4 { gpio-ranges = <&iomuxc 5 136 1>, <&iomuxc 6 145 1>, <&iomuxc 7 150 1>, <&iomuxc 8 146 1>, <&iomuxc 9 151 1>, <&iomuxc 10 147 1>, - <&iomuxc 11 151 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>, + <&iomuxc 11 152 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>, <&iomuxc 14 149 1>, <&iomuxc 15 154 1>, <&iomuxc 16 39 7>, <&iomuxc 23 56 1>, <&iomuxc 24 61 7>, <&iomuxc 31 46 1>; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 0ea75f7b6039..88cc7f51a4e9 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts index 78bfc1a307d6..116bebb5e435 100644 --- a/arch/arm/boot/dts/imx6q-b450v3.dts +++ b/arch/arm/boot/dts/imx6q-b450v3.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts index 1dcaee23ed9c..33f5c436c09f 100644 --- a/arch/arm/boot/dts/imx6q-b650v3.dts +++ b/arch/arm/boot/dts/imx6q-b650v3.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index 167f7446722a..d78514c92349 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index 308e11cea1db..14fa6b25dc45 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -13,17 +13,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -133,7 +133,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index e4a415fd899b..36d6bb39593a 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -95,7 +95,6 @@ }; &ecspi5 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi5>; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index a150bca84daa..d8a5789a4bc8 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -89,6 +89,14 @@ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-out; + spdif-in; + }; }; &cpu0 { @@ -114,7 +122,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -222,6 +229,13 @@ >; }; + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 + MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 + >; + }; + pinctrl_uart4: uart4grp { fsl,pins = < MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 @@ -259,6 +273,12 @@ status = "okay"; }; +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + status = "okay"; +}; + &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts index 353425edcdf4..b68aa0e57f20 100644 --- a/arch/arm/boot/dts/imx6q-cubox-i.dts +++ b/arch/arm/boot/dts/imx6q-cubox-i.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 908dab68bdca..f28883bbe7b1 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -104,7 +104,6 @@ &ecspi5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi5>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio1 12 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts index 7c7c1a855ece..fd2220aa49e2 100644 --- a/arch/arm/boot/dts/imx6q-evi.dts +++ b/arch/arm/boot/dts/imx6q-evi.dts @@ -90,7 +90,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>; @@ -98,7 +97,6 @@ }; &ecspi3 { - fsl,spi-num-chipselects = <3>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>, <&gpio4 25 GPIO_ACTIVE_LOW>, <&gpio4 26 GPIO_ACTIVE_LOW>; @@ -108,7 +106,6 @@ }; &ecspi5 { - fsl,spi-num-chipselects = <4>; cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>, <&gpio1 13 GPIO_ACTIVE_LOW>, <&gpio1 12 GPIO_ACTIVE_LOW>, diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 747bc104ad00..8e84713f42c0 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -138,7 +138,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts index 65e66f994f88..8f9252889971 100644 --- a/arch/arm/boot/dts/imx6q-h100.dts +++ b/arch/arm/boot/dts/imx6q-h100.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts index 1884c16784e2..69a7a0a1cb21 100644 --- a/arch/arm/boot/dts/imx6q-hummingboard.dts +++ b/arch/arm/boot/dts/imx6q-hummingboard.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts index 005318865f66..e451b4ceb4d8 100644 --- a/arch/arm/boot/dts/imx6q-icore-rqs.dts +++ b/arch/arm/boot/dts/imx6q-icore-rqs.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -45,7 +45,7 @@ #include "imx6qdl-icore-rqs.dtsi" / { - model = "Engicam i.CoreM6 Quad SOM"; + model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit"; compatible = "engicam,imx6-icore-rqs", "fsl,imx6q"; sound { diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts index 025f54350c28..59eb7adc2472 100644 --- a/arch/arm/boot/dts/imx6q-icore.dts +++ b/arch/arm/boot/dts/imx6q-icore.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts index f7995c513b67..432291bedcf1 100644 --- a/arch/arm/boot/dts/imx6q-marsboard.dts +++ b/arch/arm/boot/dts/imx6q-marsboard.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -97,7 +97,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; - fsl,spi-num-chipselects = <1>; status = "okay"; m25p80@0 { diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts new file mode 100644 index 000000000000..eedbe737420c --- /dev/null +++ b/arch/arm/boot/dts/imx6q-mccmon6.dts @@ -0,0 +1,473 @@ +/* + * Copyright 2016-2017 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/dts-v1/; + +#include "imx6q.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Liebherr (LWN) monitor6 i.MX6 Quad Board"; + compatible = "lwn,mccmon6", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; + + backlight_lvds: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm2 0 5000000 PWM_POLARITY_INVERTED>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100 101 102 103 104 105 106 107 108 109 + 110 111 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 128 129 + 130 131 132 133 134 135 136 137 138 139 + 140 141 142 143 144 145 146 147 148 149 + 150 151 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 168 169 + 170 171 172 173 174 175 176 177 178 179 + 180 181 182 183 184 185 186 187 188 189 + 190 191 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 208 209 + 210 211 212 213 214 215 216 217 218 219 + 220 221 222 223 224 225 226 227 228 229 + 230 231 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 248 249 + 250 251 252 253 254 255>; + default-brightness-level = <50>; + enable-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + + reg_lvds: regulator-lvds { + compatible = "regulator-fixed"; + regulator-name = "lvds_ppen"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lvds>; + gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + panel-lvds0 { + compatible = "innolux,g121x1-l03"; + backlight = <&backlight_lvds>; + power-supply = <®_lvds>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&ecspi3 { + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>; + status = "okay"; + + s25sl032p: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <40000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pfuze100: pmic@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&pwm2 { + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + uart-has-rtscts; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>; + ranges = <0 0 0x08000000 0x08000000>; + status = "okay"; + + nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + use-advanced-sector-protection; + fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000 + 0x0000c000 0x1404a38e 0x00000000>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_backlight: dispgrp { + fsl,pins = < + /* BLEN_OUT */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + >; + }; + + pinctrl_ecspi3_cs: ecspi3csgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 + >; + }; + + pinctrl_ecspi3_flwp: ecspi3flwpgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x80000000 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_reg_lvds: reqlvdsgrp { + fsl,pins = < + /* LVDS_PPEN_OUT */ + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b1 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 + >; + }; + + pinctrl_weim_cs0: weimcs0grp { + fsl,pins = < + MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 + >; + }; + + pinctrl_weim_nor: weimnorgrp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 + MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060 + MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0 + MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0 + MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0 + MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0 + MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0 + MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0 + MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0 + MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0 + MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0 + MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0 + MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0 + MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0 + MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0 + MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0 + MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0 + MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0 + MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1 + MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1 + MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1 + MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1 + MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1 + MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1 + MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1 + MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1 + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts index d417457ca6db..2a3c44f98eed 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts index cf4feefe02c5..c5d59baa1a07 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts index d1686339dc48..df8ff397a914 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index 758bca96786f..0fa32b2f3aec 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -210,7 +210,6 @@ &ecspi3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3_novena>; - fsl,spi-num-chipselects = <3>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 66d10d8d534c..02a7cdfd57c9 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-savageboard.dts b/arch/arm/boot/dts/imx6q-savageboard.dts new file mode 100644 index 000000000000..717ac62fc2cf --- /dev/null +++ b/arch/arm/boot/dts/imx6q-savageboard.dts @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-savageboard.dtsi" + +/ { + model = "Poslab SavageBoard Quad"; + compatible = "poslab,imx6q-savageboard", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-ts4900.dts b/arch/arm/boot/dts/imx6q-ts4900.dts index 9b81ebc8b0d4..fab76f8cd076 100644 --- a/arch/arm/boot/dts/imx6q-ts4900.dts +++ b/arch/arm/boot/dts/imx6q-ts4900.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts index 22009947cebc..69bdd82ce21f 100644 --- a/arch/arm/boot/dts/imx6q-utilite-pro.dts +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts @@ -59,6 +59,33 @@ rtc1 = &snvs_rtc; }; + encoder { + compatible = "ti,tfp410"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint { + remote-endpoint = <¶llel_display_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -72,6 +99,19 @@ }; }; + hdmi-connector { + compatible = "hdmi-connector"; + + type = "a"; + ddc-i2c-bus = <&i2c_dvi_ddc>; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; + i2cmux { compatible = "i2c-mux-gpio"; pinctrl-names = "default"; @@ -105,8 +145,46 @@ #size-cells = <0>; }; }; + + parallel-display { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1>; + + interface-pix-fmt = "rgb24"; + + port@0 { + reg = <0>; + + parallel_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + parallel_display_out: endpoint { + remote-endpoint = <&tfp410_in>; + }; + }; + }; }; +/* + * A single IPU is not able to drive both display interfaces available on the + * Utilite Pro at high resolution due to its bandwidth limitation. Since the + * tfp410 encoder is wired up to IPU1, sever the link between IPU1 and the + * SoC-internal Designware HDMI encoder forcing the latter to be connected to + * IPU2 instead of IPU1. + */ +/delete-node/&ipu1_di0_hdmi; +/delete-node/&hdmi_mux_0; +/delete-node/&ipu1_di1_hdmi; +/delete-node/&hdmi_mux_1; + &hdmi { ddc-i2c-bus = <&i2c2>; status = "okay"; @@ -151,6 +229,39 @@ >; }; + pinctrl_ipu1: ipu1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x38 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x38 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x38 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x38 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x38 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x38 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x38 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x38 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x38 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x38 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x38 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x38 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x38 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x38 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x38 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x38 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x38 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x38 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x38 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x38 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x38 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x38 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x38 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x38 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x38 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x38 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x38 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1 @@ -194,6 +305,10 @@ }; }; +&ipu1_di0_disp0 { + remote-endpoint = <¶llel_display_in>; +}; + &pcie { pcie@0,0 { reg = <0x000000 0 0 0 0>; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 8c8a049eb3d0..ba01dd76d887 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -175,7 +175,6 @@ /* Apalis SPI1 */ &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -184,7 +183,6 @@ /* Apalis SPI2 */ &ecspi2 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index 5e7792d6bf58..550e100e85fc 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -176,7 +176,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <3>; cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 10 GPIO_ACTIVE_LOW>, <&gpio4 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index 54f4f0193f2b..b2debc0aa720 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -100,7 +100,6 @@ }; &ecspi4 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 20 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index 7fff02c406f2..ec68f1cace31 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -114,7 +114,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <3>; cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH &gpio4 10 GPIO_ACTIVE_HIGH &gpio4 11 GPIO_ACTIVE_HIGH>; @@ -124,7 +123,6 @@ }; &ecspi2 { - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; @@ -132,7 +130,6 @@ }; &ecspi4 { - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index e6faa653f91a..e8078758f26c 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -138,7 +138,6 @@ /* Colibri SSP */ &ecspi4 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index ff41f83551de..14fff4ee6516 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index b2c083d57598..d78312c63672 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -29,7 +29,6 @@ }; &ecspi3 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 24 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index afec2c7628ef..e8c1edc82e6e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -56,38 +56,29 @@ status = "okay"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_5p0v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "5P0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - reg_usb_otg_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; }; }; @@ -158,6 +149,81 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw1 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ + reg_1p8v: sw2 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <2004000>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw4 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ + reg_2p5v: ldo2 { + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2490375>; + regulator-max-microvolt = <2490375>; + lltc,fb-voltage-divider = <487000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &i2c3 { @@ -312,6 +378,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + pinctrl_pps: ppsgrp { fsl,pins = < MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 54aca3a07ce4..91991d63a69c 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -71,57 +71,37 @@ status = "okay"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_1p0v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "1P0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - /* remove this fixed regulator once ltc3676__sw2 driver available */ - reg_1p8v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; + reg_1p0v: regulator-1p0v { + compatible = "regulator-fixed"; + regulator-name = "1P0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; - reg_3p3v: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_5p0v: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "5P0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - reg_usb_otg_vbus: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; }; sound { @@ -159,7 +139,6 @@ }; &ecspi3 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; @@ -233,6 +212,89 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw1 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ + reg_1p8v: sw2 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <2004000>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw4 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ + reg_2p5v: ldo2 { + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2490375>; + regulator-max-microvolt = <2490375>; + lltc,fb-voltage-divider = <487000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_AUD_1P8: Audio codec */ + reg_aud_1p8v: ldo3 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &i2c3 { @@ -467,6 +529,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + pinctrl_pps: ppsgrp { fsl,pins = < MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 88e5cb3b6be9..a208e7e0dc6e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -72,57 +72,37 @@ status = "okay"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_1p0v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "1P0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - /* remove when pmic 1p8 regulator available */ - reg_1p8v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; + reg_1p0v: regulator-1p0v { + compatible = "regulator-fixed"; + regulator-name = "1P0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; - reg_3p3v: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_usb_h1_vbus: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - reg_usb_otg_vbus: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; }; sound { @@ -226,6 +206,87 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw1 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ + reg_1p8v: sw2 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <2004000>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw4 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ + reg_2p5v: ldo2 { + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2490375>; + regulator-max-microvolt = <2490375>; + lltc,fb-voltage-divider = <487000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_AUD_1P8: Audio codec */ + reg_aud_1p8v: ldo3 { + regulator-name = "vdd1p8a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &i2c3 { @@ -456,6 +517,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + pinctrl_pps: ppsgrp { fsl,pins = < MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 1753ab720b0b..968fda94d14b 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -149,6 +149,13 @@ <&clks IMX6QDL_CLK_PLL3_USB_OTG>; }; +&ecspi2 { + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; @@ -499,6 +506,15 @@ >; }; + pinctrl_ecspi2: escpi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 + >; + }; + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index 4b9fef834822..405b40310ddf 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -78,34 +78,25 @@ reg = <0x10000000 0x20000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_5p0v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "5P0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; - reg_usb_h1_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; - reg_usb_otg_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; }; @@ -174,6 +165,89 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw1 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw2 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_3P3 (1+R1/R2 = 1.281) */ + reg_3p3: sw4 { + regulator-name = "vdd3p3"; + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <3647000>; + lltc,fb-voltage-divider = <200000 56200>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8a (1+R1/R2 = 2.505): HDMI In core */ + reg_1p8a: ldo2 { + regulator-name = "vdd1p8a"; + regulator-min-microvolt = <1816125>; + regulator-max-microvolt = <1816125>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8b: HDMI In analog */ + reg_1p8b: ldo3 { + regulator-name = "vdd1p8b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &i2c3 { @@ -308,6 +382,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + pinctrl_pwm2: pwm2grp { fsl,pins = < MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index ee83161f674b..67613dd7cc92 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -55,37 +55,28 @@ reg = <0x10000000 0x20000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_1p0v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "1P0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; + reg_1p0v: regulator-1p0v { + compatible = "regulator-fixed"; + regulator-name = "1P0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; - reg_3p3v: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_5p0v: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "5P0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; }; }; @@ -148,6 +139,81 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw1 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8 (1+R1/R2 = 2.505): ENET-PHY */ + reg_1p8v: sw2 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <2004000>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw4 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ + reg_2p5v: ldo2 { + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2490375>; + regulator-max-microvolt = <2490375>; + lltc,fb-voltage-divider = <487000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &i2c3 { @@ -260,6 +326,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + pinctrl_pwm2: pwm2grp { fsl,pins = < MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi index 86cec0527f73..57374dddf98d 100644 --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi @@ -92,14 +92,6 @@ status = "okay"; }; - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P0V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - reg_5p0v: regulator-5p0v { compatible = "regulator-fixed"; regulator-name = "5P0V"; @@ -179,6 +171,89 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw1 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw2 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_3P3 (1+R1/R2 = 1.281) */ + reg_3p3v: sw4 { + regulator-name = "vdd3p3"; + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <3647000>; + lltc,fb-voltage-divider = <200000 56200>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8a (1+R1/R2 = 2.505): Analog Video Decoder */ + reg_1p8a: ldo2 { + regulator-name = "vdd1p8a"; + regulator-min-microvolt = <1816125>; + regulator-max-microvolt = <1816125>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8b: microSD VDD_1P8 */ + reg_1p8b: ldo3 { + regulator-name = "vdd1p8b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &i2c3 { @@ -255,7 +330,6 @@ pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; - vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -327,6 +401,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + pinctrl_pps: ppsgrp { fsl,pins = < MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index d6c2358ffad4..988334c889eb 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi index d5c3aa88adbe..5fab5be414fe 100644 --- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -223,7 +223,7 @@ pinctrl-2 = <&pinctrl_usdhc3_200mhz>; vmcc-supply = <®_sd3_vmmc>; cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - bus-witdh=<4>; + bus-witdh = <4>; no-1-8-v; status = "okay"; }; @@ -234,7 +234,7 @@ pinctrl-1 = <&pinctrl_usdhc4_100mhz>; pinctrl-2 = <&pinctrl_usdhc4_200mhz>; vmcc-supply = <®_sd4_vmmc>; - bus-witdh=<8>; + bus-witdh = <8>; no-1-8-v; non-removable; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi index 023839a02dd0..55bebfc9ad94 100644 --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index 469ef58ce4bc..a9b207751a02 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -13,17 +13,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index 3d62401dbd7f..6a410160c9ee 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index 63acd54f5278..6b81580623ff 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -209,7 +209,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -515,8 +514,6 @@ status = "okay"; lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port@4 { diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index 34887a10c5f1..bad3c9f9eeac 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -319,8 +319,6 @@ compatible = "fsl,imx6q-nitrogen6_max-sgtl5000", "fsl,imx-audio-sgtl5000"; model = "imx6q-nitrogen6_max-sgtl5000"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sgtl5000>; ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = @@ -353,7 +351,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -402,6 +399,8 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; @@ -739,8 +738,6 @@ status = "okay"; lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port@4 { @@ -753,8 +750,6 @@ }; lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port@4 { diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index d80f21abea62..559da17297ef 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -250,8 +250,6 @@ compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000", "fsl,imx-audio-sgtl5000"; model = "imx6q-nitrogen6_som2-sgtl5000"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sgtl5000>; ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = @@ -284,7 +282,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -320,6 +317,8 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; @@ -640,8 +639,6 @@ status = "okay"; lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port@4 { diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index e476d01959ea..70772ebadd4d 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -255,7 +255,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -533,7 +532,6 @@ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 - MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 >; }; @@ -580,8 +578,6 @@ status = "okay"; lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port@4 { diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index e9801a26f3b4..6e5cb6a99550 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -76,7 +76,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 24 0>; flash@0 { diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi index 17704a5c1bcb..5cf90c24c707 100644 --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -89,7 +89,6 @@ }; &ecspi2 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; @@ -97,7 +96,6 @@ }; &ecspi3 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 52390ba83e81..a2a714d199ea 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -124,7 +124,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 1f9076e271e4..84131794e97b 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -241,7 +241,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -525,8 +524,6 @@ status = "okay"; lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port@4 { diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 55ef53571fdd..63bf95ed8c88 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -160,7 +160,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 9 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; diff --git a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi new file mode 100644 index 000000000000..a616e3c400d3 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi @@ -0,0 +1,255 @@ +/* + * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart1; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; + label = "Power Button"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + panel { + compatible = "avic,tm097tdh02", "hannstar,hsd100pxn1"; + backlight = <&panel_bl>; + power-supply = <®_3p3v>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + panel_bl: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <4>; + power-supply = <®_3p3v>; + pwms = <&pwm1 0 10000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&fec { + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + reg = <0>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +/* SD card */ +&usdhc3 { + bus-width = <4>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd>; + status = "okay"; +}; + +/* eMMC */ +&usdhc4 { + bus-width = <8>; + keep-power-in-suspend; + no-1-8-v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_emmc: emmcgrp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + /* PHY reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_sd: sdgrp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + /* CD pin */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi index 5c26b26e851a..267c956d8910 100644 --- a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi +++ b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -95,7 +95,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -109,7 +108,6 @@ }; &ecspi2 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index 2bf2e623ac1e..1691714f13a2 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -221,7 +221,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <2>; cs-gpios = < &gpio2 30 GPIO_ACTIVE_HIGH &gpio3 19 GPIO_ACTIVE_HIGH diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 53e6e63cbb02..6d7bf6496117 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -16,6 +16,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; @@ -626,8 +634,8 @@ regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1375000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; regulator-always-on; anatop-reg-offset = <0x110>; anatop-vol-bit-shift = <8>; @@ -654,15 +662,15 @@ regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; - regulator-min-microvolt = <2000000>; + regulator-min-microvolt = <2250000>; regulator-max-microvolt = <2750000>; regulator-always-on; anatop-reg-offset = <0x130>; anatop-vol-bit-shift = <8>; anatop-vol-bit-width = <5>; anatop-min-bit-val = <0>; - anatop-min-voltage = <2000000>; - anatop-max-voltage = <2750000>; + anatop-min-voltage = <2100000>; + anatop-max-voltage = <2875000>; }; reg_arm: regulator-vddcore { @@ -808,7 +816,7 @@ reg = <0x020e0000 0x4000>; }; - ldb: ldb@020e0008 { + ldb: ldb { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb"; @@ -1100,6 +1108,7 @@ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_EIM_SLOW>; fsl,weim-cs-gpr = <&gpr>; + status = "disabled"; }; ocotp: ocotp@021bc000 { @@ -1157,8 +1166,10 @@ }; vdoa@021e4000 { + compatible = "fsl,imx6q-vdoa"; reg = <0x021e4000 0x4000>; interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_VDOA>; }; uart2: serial@021e8000 { diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi index 0d4977ab7d29..24d071f5d9cd 100644 --- a/arch/arm/boot/dts/imx6qp.dtsi +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -95,6 +95,12 @@ }; }; +&fec { + /delete-property/interrupts-extended; + interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>, + <0 119 IRQ_TYPE_LEVEL_HIGH>; +}; + &ldb { clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>, <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>, diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index be118820e9f7..0a90eea17018 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -117,7 +117,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 11 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 4fd6de29f07d..cc9572ea2860 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -14,6 +14,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec; @@ -900,6 +908,7 @@ reg = <0x021b8000 0x4000>; interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; fsl,weim-cs-gpr = <&gpr>; + status = "disabled"; }; ocotp: ocotp@021bc000 { diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index 9b817f3501a6..802da45aa551 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -142,7 +142,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; diff --git a/arch/arm/boot/dts/imx6sx-sdb-sai.dts b/arch/arm/boot/dts/imx6sx-sdb-sai.dts index 0155450d680e..2ac865b7c364 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-sai.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-sai.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi index 2b65d26f4396..49f466fe0b1d 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi +++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi @@ -75,6 +75,50 @@ regulator-max-microvolt = <3300000>; regulator-boot-on; }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_otg1_reg>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_otg2_reg>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan: regulator-wlan { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + reg_bt: regulator-bt { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_reg>; + enable-active-high; + gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>; + regulator-name = "bt_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; }; &cpu0 { @@ -86,6 +130,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; phy-mode = "rmii"; + phy-reset-duration = <10>; phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; }; @@ -186,6 +231,11 @@ }; &iomuxc { + pinctrl_bt_reg: btreggrp { + fsl,pins = + <MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x15059>; + }; + pinctrl_enet1: enet1grp { fsl,pins = <MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0xa0b1>, @@ -223,6 +273,14 @@ <MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1>; }; + pinctrl_uart3: uart3grp { + fsl,pins = + <MX6SX_PAD_SD3_DATA4__UART3_RX 0x13059>, + <MX6SX_PAD_SD3_DATA5__UART3_TX 0x13059>, + <MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x13059>, + <MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x13059>; + }; + pinctrl_uart5: uart5grp { fsl,pins = <MX6SX_PAD_SD4_DATA4__UART5_RX 0x1b0b1>, @@ -241,6 +299,28 @@ <MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x1b0b1>; }; + pinctrl_otg1_reg: otg1grp { + fsl,pins = + <MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0>; + }; + + + pinctrl_otg2_reg: otg2grp { + fsl,pins = + <MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x10b0>; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = + <MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059>, + <MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x10b0>; + }; + + pinctrl_usb_otg2: usbot2ggrp { + fsl,pins = + <MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC 0x10b0>; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = <MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059>, @@ -251,6 +331,19 @@ <MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059>, <MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x17059>; /* CD */ }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = + <MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x15059>, + <MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x13059>, + <MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17069>, + <MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17069>, + <MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17069>, + <MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17069>, + <MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17069>, + <MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10069>, + <MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT 0x10059>; + }; }; &uart1 { @@ -266,6 +359,13 @@ status = "disabled"; }; +&uart3 { /* Bluetooth */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + /* Arduino serial */ &uart5 { pinctrl-names = "default"; @@ -280,6 +380,21 @@ status = "disabled"; }; +&usbotg1 { /* J2 micro USB port */ + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + status = "okay"; +}; + +&usbotg2 { /* J3 host USB port */ + vbus-supply = <®_usb_otg2_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg2>; + dr_mode = "host"; + status = "okay"; +}; + &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; @@ -291,3 +406,25 @@ wakeup-source; status = "okay"; }; + +&usdhc3 { /* Wi-Fi */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + non-removable; + vmmc-supply = <®_wlan>; + cap-power-off-card; + wakeup-source; + keep-power-in-suspend; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1831"; + reg = <2>; + interrupt-parent = <&gpio2>; + interrupts = <16 IRQ_TYPE_EDGE_RISING>; + ref-clock-frequency = <38400000>; + tcxo-clock-frequency = <26000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 076a30f9bcae..dd4ec85ecbaa 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -15,6 +15,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { can0 = &flexcan1; @@ -977,6 +985,7 @@ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_EIM_SLOW>; fsl,weim-cs-gpr = <&gpr>; + status = "disabled"; }; ocotp: ocotp@021bc000 { diff --git a/arch/arm/boot/dts/imx6ul-geam-kit.dts b/arch/arm/boot/dts/imx6ul-geam-kit.dts index 4c4af76143e3..142e60cab65f 100644 --- a/arch/arm/boot/dts/imx6ul-geam-kit.dts +++ b/arch/arm/boot/dts/imx6ul-geam-kit.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6ul-geam.dtsi b/arch/arm/boot/dts/imx6ul-geam.dtsi index 64eb9ed59b9c..940aef67313b 100644 --- a/arch/arm/boot/dts/imx6ul-geam.dtsi +++ b/arch/arm/boot/dts/imx6ul-geam.dtsi @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts new file mode 100644 index 000000000000..f5b422898e61 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6ul-isiot.dtsi" + +/ { + model = "Engicam Is.IoT MX6UL eMMC Starter kit"; + compatible = "engicam,imx6ul-isiot", "fsl,imx6ul"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; + bus-width = <8>; + no-1-8-v; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070 + MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-isiot-nand.dts b/arch/arm/boot/dts/imx6ul-isiot-nand.dts new file mode 100644 index 000000000000..de15e1c75dd1 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-isiot-nand.dts @@ -0,0 +1,79 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6ul-isiot.dtsi" + +/ { + model = "Engicam Is.IoT MX6UL NAND Starter kit"; + compatible = "engicam,imx6ul-isiot", "fsl,imx6ul"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "okay"; +}; + +&iomuxc { + pinctrl_gpmi_nand: gpmi-nand { + fsl,pins = < + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi new file mode 100644 index 000000000000..0b43699af3e3 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi @@ -0,0 +1,114 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx6ul.dtsi" + +/ { + memory { + reg = <0x80000000 0x20000000>; + }; + + chosen { + stdout-path = &uart1; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + bus-width = <4>; + no-1-8-v; + status = "okay"; +}; + +&iomuxc { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-liteboard.dts b/arch/arm/boot/dts/imx6ul-liteboard.dts index 6e04cb9202f4..ed1d891d6a89 100644 --- a/arch/arm/boot/dts/imx6ul-liteboard.dts +++ b/arch/arm/boot/dts/imx6ul-liteboard.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6ul-litesom.dtsi b/arch/arm/boot/dts/imx6ul-litesom.dtsi index 461292d33417..039721d3dcb4 100644 --- a/arch/arm/boot/dts/imx6ul-litesom.dtsi +++ b/arch/arm/boot/dts/imx6ul-litesom.dtsi @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi new file mode 100644 index 000000000000..51095df33a90 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi @@ -0,0 +1,192 @@ +/* + * Copyright 2017 Armadeus Systems <support@armadeus.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6ul.dtsi" + +/ { + memory { + reg = <0x80000000 0>; /* will be filled by U-Boot */ + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + usdhc3_pwrseq: usdhc3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-reset-duration = <1>; + phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + phy-handle = <ðphy1>; + phy-supply = <®_3v3>; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupt-parent = <&gpio4>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + }; + }; +}; + +/* Bluetooth */ +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8>; + uart-has-rtscts; + status = "okay"; +}; + +/* eMMC */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "okay"; +}; + +/* WiFi */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + no-1-8-v; + non-removable; + mmc-pwrseq = <&usdhc3_pwrseq>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + brcmf: bcrmf@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio2>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + /* INT# */ + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0 + /* RST# */ + MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + >; + }; + + pinctrl_uart8: uart8grp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0 + /* BT_REG_ON */ + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059 + MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059 + MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059 + MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0 + MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0 + MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0 + MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0 + MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0 + MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0 + /* WL_REG_ON */ + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0 + /* WL_IRQ */ + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/imx6ul-opos6uldev.dts new file mode 100644 index 000000000000..0e59ee57fd55 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-opos6uldev.dts @@ -0,0 +1,412 @@ +/* + * Copyright 2017 Armadeus Systems <support@armadeus.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6ul-opos6ul.dtsi" + +/ { + model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board"; + compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul"; + + chosen { + stdout-path = &uart1; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 191000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_5v>; + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + user-button { + label = "User button"; + gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + linux,code = <BTN_MISC>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + user-led { + label = "User"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + onewire { + compatible = "w1-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_w1>; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg1_vbus: regulator-usbotg1vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg1vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_vbus>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbotg2_vbus: regulator-usbotg2vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg2vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2_vbus>; + gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&adc1 { + vref-supply = <®_3v3>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_5v>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_5v>; + status = "okay"; +}; + +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>; + status = "okay"; + + spidev0: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <5000000>; + }; + + spidev1: spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <5000000>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock_frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock_frequency = <400000>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + display = <&display0>; + lcd-supply = <®_3v3>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + timing0: timing0 { + clock-frequency = <33000033>; + hactive = <800>; + vactive = <480>; + hback-porch = <96>; + hfront-porch = <96>; + vback-porch = <20>; + vfront-porch = <21>; + hsync-len = <64>; + vsync-len = <4>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "disabled"; +}; + +&tsc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + measure-delay-time = <0xffff>; + pre-charge-time = <0xffff>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_id>; + vbus-supply = <®_usbotg1_vbus>; + dr_mode = "otg"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usbotg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpios>; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0 + MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0 + MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0 + MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0 + MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0 + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0 + >; + }; + + pinctrl_gpios: gpiosgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0 + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0 + MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0 + MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0 + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0 + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0 + MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x0b0b0 + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + >; + }; + + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1 + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0 + >; + }; + + pinctrl_tsc: tscgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0 + >; + }; + + pinctrl_usbotg1_vbus: usbotg1vbusgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0 + >; + }; + + pinctrl_usbotg2_vbus: usbotg2vbusgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 + >; + }; + + pinctrl_w1: w1grp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts index 827d9e8fc74e..7d7254b12a75 100644 --- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts @@ -14,17 +14,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index 530e9ca13a74..c784a0b75ca0 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -285,7 +285,6 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - fsl,spi-num-chipselects = <2>; cs-gpios = < &gpio1 29 GPIO_ACTIVE_HIGH &gpio1 10 GPIO_ACTIVE_HIGH diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 39845a7e0463..b9d7d2d09402 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -15,6 +15,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &fec1; @@ -91,11 +99,11 @@ }; intc: interrupt-controller@00a01000 { - compatible = "arm,cortex-a7-gic"; + compatible = "arm,gic-400", "arm,cortex-a7-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x00a01000 0x1000>, - <0x00a02000 0x1000>, + <0x00a02000 0x2000>, <0x00a04000 0x2000>, <0x00a06000 0x2000>; }; @@ -534,7 +542,6 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2625000>; anatop-max-voltage = <3400000>; - anatop-enable-bit = <0>; }; reg_arm: regulator-vddcore { @@ -851,6 +858,12 @@ reg = <0x021b0000 0x4000>; }; + ocotp: ocotp-ctrl@021bc000 { + compatible = "fsl,imx6ul-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6UL_CLK_OCOTP>; + }; + lcdif: lcdif@021c8000 { compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif"; reg = <0x021c8000 0x4000>; diff --git a/arch/arm/boot/dts/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/imx6ull-14x14-evk.dts index db5bc076e1cc..4741871434dd 100644 --- a/arch/arm/boot/dts/imx6ull-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ull-14x14-evk.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi index dee8ab8135e1..0c182917b863 100644 --- a/arch/arm/boot/dts/imx6ull.dtsi +++ b/arch/arm/boot/dts/imx6ull.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index a9cc65725f19..a171545478be 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -596,29 +596,29 @@ pinctrl_gpio_lpsr: gpio1-grp { fsl,pins = < - MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x59 - MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x59 - MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x59 + MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x59 + MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x59 + MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x59 >; }; pinctrl_i2c1: i2c1-grp { fsl,pins = < - MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x4000007f - MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f + MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x4000007f + MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL 0x4000007f >; }; pinctrl_cd_usdhc1: usdhc1-cd-grp { fsl,pins = < - MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */ + MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */ >; }; pinctrl_uart1_ctrl2: uart1-ctrl2-grp { fsl,pins = < - MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x14 /* DSR */ - MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x14 /* RI */ + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 /* DSR */ + MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x14 /* RI */ >; }; }; diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts index 58b09bf1ba2d..ae45af1ad062 100644 --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -261,12 +261,6 @@ >; }; - pinctrl_usbotg1: usbotg1grp { - fsl,pins = < - MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */ - >; - }; - pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x59 @@ -283,3 +277,11 @@ >; }; }; + +&iomuxc_lpsr { + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */ + >; + }; +};
\ No newline at end of file diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index ce08f180f213..5d98e2b5d54b 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -712,33 +712,33 @@ pinctrl_hog_2: hoggrp-2 { fsl,pins = < - MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x7d - MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x7d + MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x7d + MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2 0x7d >; }; pinctrl_backlight_j9: backlightj9grp { fsl,pins = < - MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x7d + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x7d >; }; pinctrl_pwm1: pwm1grp { fsl,pins = < - MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x7d + MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x7d >; }; pinctrl_usbotg1: usbotg1grp { fsl,pins = < - MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x7d - MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 + MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x7d + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 >; }; pinctrl_wdog1: wdog1grp { fsl,pins = < - MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x75 + MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x75 >; }; }; diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h index 7bc3c00e56c6..f6f7e78f8820 100644 --- a/arch/arm/boot/dts/imx7d-pinfunc.h +++ b/arch/arm/boot/dts/imx7d-pinfunc.h @@ -15,61 +15,61 @@ * <mux_reg conf_reg input_reg mux_mode input_val> */ -#define MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0 -#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0 -#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0 -#define MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0 -#define MX7D_PAD_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0 -#define MX7D_PAD_GPIO1_IO01__SAI1_MCLK 0x0004 0x0034 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO01__ANATOP_24M_OUT 0x0004 0x0034 0x0000 0x4 0x0 -#define MX7D_PAD_GPIO1_IO01__OBSERVE0_OUT 0x0004 0x0034 0x0000 0x6 0x0 -#define MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x0008 0x0038 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO02__PWM2_OUT 0x0008 0x0038 0x0000 0x1 0x0 -#define MX7D_PAD_GPIO1_IO02__CCM_ENET_REF_CLK1 0x0008 0x0038 0x0564 0x2 0x3 -#define MX7D_PAD_GPIO1_IO02__SAI2_MCLK 0x0008 0x0038 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO02__CCM_CLKO1 0x0008 0x0038 0x0000 0x5 0x0 -#define MX7D_PAD_GPIO1_IO02__OBSERVE1_OUT 0x0008 0x0038 0x0000 0x6 0x0 -#define MX7D_PAD_GPIO1_IO02__USB_OTG1_ID 0x0008 0x0038 0x0734 0x7 0x3 -#define MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x000C 0x003C 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO03__PWM3_OUT 0x000C 0x003C 0x0000 0x1 0x0 -#define MX7D_PAD_GPIO1_IO03__CCM_ENET_REF_CLK2 0x000C 0x003C 0x0570 0x2 0x3 -#define MX7D_PAD_GPIO1_IO03__SAI3_MCLK 0x000C 0x003C 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x000C 0x003C 0x0000 0x5 0x0 -#define MX7D_PAD_GPIO1_IO03__OBSERVE2_OUT 0x000C 0x003C 0x0000 0x6 0x0 -#define MX7D_PAD_GPIO1_IO03__USB_OTG2_ID 0x000C 0x003C 0x0730 0x7 0x3 -#define MX7D_PAD_GPIO1_IO04__GPIO1_IO4 0x0010 0x0040 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x0010 0x0040 0x072C 0x1 0x1 -#define MX7D_PAD_GPIO1_IO04__FLEXTIMER1_CH4 0x0010 0x0040 0x0594 0x2 0x1 -#define MX7D_PAD_GPIO1_IO04__UART5_DCE_CTS 0x0010 0x0040 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO04__UART5_DTE_RTS 0x0010 0x0040 0x0710 0x3 0x4 -#define MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x0010 0x0040 0x05D4 0x4 0x2 -#define MX7D_PAD_GPIO1_IO04__OBSERVE3_OUT 0x0010 0x0040 0x0000 0x6 0x0 -#define MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x0014 0x0044 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR 0x0014 0x0044 0x0000 0x1 0x0 -#define MX7D_PAD_GPIO1_IO05__FLEXTIMER1_CH5 0x0014 0x0044 0x0598 0x2 0x1 -#define MX7D_PAD_GPIO1_IO05__UART5_DCE_RTS 0x0014 0x0044 0x0710 0x3 0x5 -#define MX7D_PAD_GPIO1_IO05__UART5_DTE_CTS 0x0014 0x0044 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x0014 0x0044 0x05D8 0x4 0x2 -#define MX7D_PAD_GPIO1_IO05__OBSERVE4_OUT 0x0014 0x0044 0x0000 0x6 0x0 -#define MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x0018 0x0048 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO06__USB_OTG2_OC 0x0018 0x0048 0x0728 0x1 0x1 -#define MX7D_PAD_GPIO1_IO06__FLEXTIMER1_CH6 0x0018 0x0048 0x059C 0x2 0x1 -#define MX7D_PAD_GPIO1_IO06__UART5_DCE_RX 0x0018 0x0048 0x0714 0x3 0x4 -#define MX7D_PAD_GPIO1_IO06__UART5_DTE_TX 0x0018 0x0048 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO06__I2C2_SCL 0x0018 0x0048 0x05DC 0x4 0x2 -#define MX7D_PAD_GPIO1_IO06__CCM_WAIT 0x0018 0x0048 0x0000 0x5 0x0 -#define MX7D_PAD_GPIO1_IO06__KPP_ROW4 0x0018 0x0048 0x0624 0x6 0x1 -#define MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x001C 0x004C 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO07__USB_OTG2_PWR 0x001C 0x004C 0x0000 0x1 0x0 -#define MX7D_PAD_GPIO1_IO07__FLEXTIMER1_CH7 0x001C 0x004C 0x05A0 0x2 0x1 -#define MX7D_PAD_GPIO1_IO07__UART5_DCE_TX 0x001C 0x004C 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO07__UART5_DTE_RX 0x001C 0x004C 0x0714 0x3 0x5 -#define MX7D_PAD_GPIO1_IO07__I2C2_SDA 0x001C 0x004C 0x05E0 0x4 0x2 -#define MX7D_PAD_GPIO1_IO07__CCM_STOP 0x001C 0x004C 0x0000 0x5 0x0 -#define MX7D_PAD_GPIO1_IO07__KPP_COL4 0x001C 0x004C 0x0604 0x6 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO01__SAI1_MCLK 0x0004 0x0034 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO01__ANATOP_24M_OUT 0x0004 0x0034 0x0000 0x4 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO01__OBSERVE0_OUT 0x0004 0x0034 0x0000 0x6 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x0008 0x0038 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO02__PWM2_OUT 0x0008 0x0038 0x0000 0x1 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO02__CCM_ENET_REF_CLK1 0x0008 0x0038 0x0564 0x2 0x3 +#define MX7D_PAD_LPSR_GPIO1_IO02__SAI2_MCLK 0x0008 0x0038 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO02__CCM_CLKO1 0x0008 0x0038 0x0000 0x5 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO02__OBSERVE1_OUT 0x0008 0x0038 0x0000 0x6 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO02__USB_OTG1_ID 0x0008 0x0038 0x0734 0x7 0x3 +#define MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x000C 0x003C 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO03__PWM3_OUT 0x000C 0x003C 0x0000 0x1 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_ENET_REF_CLK2 0x000C 0x003C 0x0570 0x2 0x3 +#define MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK 0x000C 0x003C 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2 0x000C 0x003C 0x0000 0x5 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO03__OBSERVE2_OUT 0x000C 0x003C 0x0000 0x6 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO03__USB_OTG2_ID 0x000C 0x003C 0x0730 0x7 0x3 +#define MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x0010 0x0040 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x0010 0x0040 0x072C 0x1 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO04__FLEXTIMER1_CH4 0x0010 0x0040 0x0594 0x2 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO04__UART5_DCE_CTS 0x0010 0x0040 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO04__UART5_DTE_RTS 0x0010 0x0040 0x0710 0x3 0x4 +#define MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL 0x0010 0x0040 0x05D4 0x4 0x2 +#define MX7D_PAD_LPSR_GPIO1_IO04__OBSERVE3_OUT 0x0010 0x0040 0x0000 0x6 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x0014 0x0044 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR 0x0014 0x0044 0x0000 0x1 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO05__FLEXTIMER1_CH5 0x0014 0x0044 0x0598 0x2 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO05__UART5_DCE_RTS 0x0014 0x0044 0x0710 0x3 0x5 +#define MX7D_PAD_LPSR_GPIO1_IO05__UART5_DTE_CTS 0x0014 0x0044 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x0014 0x0044 0x05D8 0x4 0x2 +#define MX7D_PAD_LPSR_GPIO1_IO05__OBSERVE4_OUT 0x0014 0x0044 0x0000 0x6 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x0018 0x0048 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC 0x0018 0x0048 0x0728 0x1 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO06__FLEXTIMER1_CH6 0x0018 0x0048 0x059C 0x2 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO06__UART5_DCE_RX 0x0018 0x0048 0x0714 0x3 0x4 +#define MX7D_PAD_LPSR_GPIO1_IO06__UART5_DTE_TX 0x0018 0x0048 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO06__I2C2_SCL 0x0018 0x0048 0x05DC 0x4 0x2 +#define MX7D_PAD_LPSR_GPIO1_IO06__CCM_WAIT 0x0018 0x0048 0x0000 0x5 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO06__KPP_ROW4 0x0018 0x0048 0x0624 0x6 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x001C 0x004C 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO07__USB_OTG2_PWR 0x001C 0x004C 0x0000 0x1 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO07__FLEXTIMER1_CH7 0x001C 0x004C 0x05A0 0x2 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO07__UART5_DCE_TX 0x001C 0x004C 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO07__UART5_DTE_RX 0x001C 0x004C 0x0714 0x3 0x5 +#define MX7D_PAD_LPSR_GPIO1_IO07__I2C2_SDA 0x001C 0x004C 0x05E0 0x4 0x2 +#define MX7D_PAD_LPSR_GPIO1_IO07__CCM_STOP 0x001C 0x004C 0x0000 0x5 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO07__KPP_COL4 0x001C 0x004C 0x0604 0x6 0x1 #define MX7D_PAD_GPIO1_IO08__GPIO1_IO8 0x0014 0x026C 0x0000 0x0 0x0 #define MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x0014 0x026C 0x0000 0x1 0x0 #define MX7D_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0014 0x026C 0x0000 0x2 0x0 diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 2f33c463cbce..5be01a1bf840 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -111,7 +111,6 @@ }; &ecspi3 { - fsl,spi-num-chipselects = <1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; @@ -502,12 +501,6 @@ >; }; - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x110b0 - >; - }; - pinctrl_tsc2046_pendown: tsc2046_pendown { fsl,pins = < MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x59 @@ -635,11 +628,19 @@ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b >; }; + }; +}; - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74 - >; - }; +&iomuxc_lpsr { + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x74 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x110b0 + >; }; }; diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index 0345267f3390..d5237fd0fa65 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -437,10 +437,12 @@ MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x1b >; }; +}; +&iomuxc_lpsr { pinctrl_wdog: wdoggrp { fsl,pins = < - MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74 + MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x74 >; }; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 8ff2cbdd8f0d..5d3a43b8de20 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -50,6 +50,14 @@ / { #address-cells = <1>; #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { gpio0 = &gpio1; @@ -509,7 +517,6 @@ anatop-min-bit-val = <8>; anatop-min-voltage = <800000>; anatop-max-voltage = <1200000>; - anatop-enable-bit = <31>; }; }; diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi index ac990f679725..ba828cb59587 100644 --- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi @@ -138,7 +138,8 @@ netcp: netcp@24000000 { /* NetCP address range */ ranges = <0 0x24000000 0x1000000>; - clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>; + clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; + clock-names = "pa_clk", "ethss_clk", "cpts"; dma-coherent; ti,navigator-dmas = <&dma_gbe 0>, diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi index 497c417db5b6..0dd4cdd6d40c 100644 --- a/arch/arm/boot/dts/keystone-k2e.dtsi +++ b/arch/arm/boot/dts/keystone-k2e.dtsi @@ -8,6 +8,8 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/reset/ti-syscon.h> + / { compatible = "ti,k2e", "ti,keystone"; model = "Texas Instruments Keystone 2 Edison SoC"; @@ -82,6 +84,29 @@ }; }; + msm_ram: msmram@0c000000 { + compatible = "mmio-sram"; + reg = <0x0c000000 0x200000>; + ranges = <0x0 0x0c000000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + + sram-bm@1f0000 { + reg = <0x001f0000 0x8000>; + }; + }; + + psc: power-sleep-controller@02350000 { + pscrst: reset-controller { + compatible = "ti,k2e-pscrst", "ti,syscon-reset"; + #reset-cells = <1>; + + ti,reset-bits = < + 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */ + >; + }; + }; + dspgpio0: keystone_dsp_gpio@02620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index 63c7cf0c6b6d..f59567fe7d91 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -40,12 +40,12 @@ }; gic: interrupt-controller@02561000 { - compatible = "arm,cortex-a15-gic"; + compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x0 0x02561000 0x0 0x1000>, <0x0 0x02562000 0x0 0x2000>, - <0x0 0x02564000 0x0 0x1000>, + <0x0 0x02564000 0x0 0x2000>, <0x0 0x02566000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; @@ -77,6 +77,18 @@ ranges = <0x0 0x0 0x0 0xc0000000>; dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; + msm_ram: msmram@0c000000 { + compatible = "mmio-sram"; + reg = <0x0c000000 0x100000>; + ranges = <0x0 0x0c000000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + + sram-bm@f7000 { + reg = <0x000f7000 0x8000>; + }; + }; + k2g_pinctrl: pinmux@02621000 { compatible = "pinctrl-single"; reg = <0x02621000 0x410>; @@ -90,7 +102,7 @@ }; uart0: serial@02530c00 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi index f86d6ddb832b..a5ac845464bf 100644 --- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi @@ -155,7 +155,8 @@ netcp: netcp@2000000 { /* NetCP address range */ ranges = <0 0x2000000 0x100000>; - clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>; + clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; + clock-names = "pa_clk", "ethss_clk", "cpts"; dma-coherent; ti,navigator-dmas = <&dma_gbe 22>, diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi index 8f67fa8df936..69d449430511 100644 --- a/arch/arm/boot/dts/keystone-k2hk.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk.dtsi @@ -8,6 +8,8 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/reset/ti-syscon.h> + / { compatible = "ti,k2hk", "ti,keystone"; model = "Texas Instruments Keystone 2 Kepler/Hawking SoC"; @@ -46,6 +48,36 @@ soc { /include/ "keystone-k2hk-clocks.dtsi" + msm_ram: msmram@0c000000 { + compatible = "mmio-sram"; + reg = <0x0c000000 0x600000>; + ranges = <0x0 0x0c000000 0x600000>; + #address-cells = <1>; + #size-cells = <1>; + + sram-bm@5f0000 { + reg = <0x5f0000 0x8000>; + }; + }; + + psc: power-sleep-controller@02350000 { + pscrst: reset-controller { + compatible = "ti,k2hk-pscrst", "ti,syscon-reset"; + #reset-cells = <1>; + + ti,reset-bits = < + 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */ + 0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */ + 0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */ + 0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */ + 0xa4c 8 0xa4c 8 0x84c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 4: dsp4 */ + 0xa50 8 0xa50 8 0x850 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 5: dsp5 */ + 0xa54 8 0xa54 8 0x854 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 6: dsp6 */ + 0xa58 8 0xa58 8 0x858 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 7: dsp7 */ + >; + }; + }; + dspgpio0: keystone_dsp_gpio@02620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi index 5acbd0dcc2ab..b6f26824e83a 100644 --- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi @@ -137,7 +137,8 @@ netcp: netcp@26000000 { /* NetCP address range */ ranges = <0 0x26000000 0x1000000>; - clocks = <&clkosr>, <&papllclk>, <&clkcpgmac>, <&chipclk12>; + clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>, <&clkosr>; + clock-names = "pa_clk", "ethss_clk", "cpts", "osr_clk"; dma-coherent; ti,navigator-dmas = <&dma_gbe 0>, diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi index 0c5e74e79ba2..b58e7ebc0919 100644 --- a/arch/arm/boot/dts/keystone-k2l.dtsi +++ b/arch/arm/boot/dts/keystone-k2l.dtsi @@ -8,6 +8,8 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/reset/ti-syscon.h> + / { compatible = "ti,k2l", "ti,keystone"; model = "Texas Instruments Keystone 2 Lamarr SoC"; @@ -35,7 +37,7 @@ /include/ "keystone-k2l-clocks.dtsi" uart2: serial@02348400 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; @@ -45,7 +47,7 @@ }; uart3: serial@02348800 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; @@ -204,6 +206,32 @@ }; }; + msm_ram: msmram@0c000000 { + compatible = "mmio-sram"; + reg = <0x0c000000 0x200000>; + ranges = <0x0 0x0c000000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + + sram-bm@1f8000 { + reg = <0x001f8000 0x8000>; + }; + }; + + psc: power-sleep-controller@02350000 { + pscrst: reset-controller { + compatible = "ti,k2l-pscrst", "ti,syscon-reset"; + #reset-cells = <1>; + + ti,reset-bits = < + 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */ + 0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */ + 0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */ + 0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */ + >; + }; + }; + dspgpio0: keystone_dsp_gpio@02620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 02708ba2d4f4..8dd74f48a6d3 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -30,12 +30,12 @@ }; gic: interrupt-controller { - compatible = "arm,cortex-a15-gic"; + compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x0 0x02561000 0x0 0x1000>, <0x0 0x02562000 0x0 0x2000>, - <0x0 0x02564000 0x0 0x1000>, + <0x0 0x02564000 0x0 0x2000>, <0x0 0x02566000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; @@ -83,6 +83,11 @@ reg = <0x02310000 0x200>; }; + psc: power-sleep-controller@02350000 { + compatible = "syscon", "simple-mfd"; + reg = <0x02350000 0x1000>; + }; + devctrl: device-state-control@02620000 { compatible = "ti,keystone-devctrl", "syscon"; reg = <0x02620000 0x1000>; @@ -98,7 +103,7 @@ /include/ "keystone-clocks.dtsi" uart0: serial@02530c00 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; @@ -108,7 +113,7 @@ }; uart1: serial@02531000 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts index 41acbb6dd6ab..4d2b15d6244a 100644 --- a/arch/arm/boot/dts/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -194,6 +194,8 @@ }; dsa { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -241,6 +243,53 @@ &mdio { status = "okay"; + + switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <ð0port>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; /* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set diff --git a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi index 6548e68a20d0..b9125e5ed076 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi index cf2e69f0d54f..29d929535453 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts index 6dc0df2969f0..9cc05203baee 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts index edcba5c44b05..ff37e76ab551 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts index 4b6450186af5..f602c059c718 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts index 954ec1d5b6dc..ef8fc1a077f8 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts index ecd5c12a805d..ce41d553b693 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/kirkwood-linkstation.dtsi index 36c54c9dfa30..b459042a904a 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation.dtsi +++ b/arch/arm/boot/dts/kirkwood-linkstation.dtsi @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts index 345fcac48dc7..df7851820507 100644 --- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts +++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts @@ -70,6 +70,8 @@ }; dsa { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -207,6 +209,53 @@ &mdio { status = "okay"; + + switch@10 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <16>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "ethernet1"; + }; + + port@1 { + reg = <1>; + label = "ethernet2"; + }; + + port@2 { + reg = <2>; + label = "ethernet3"; + }; + + port@3 { + reg = <3>; + label = "ethernet4"; + }; + + port@4 { + reg = <4>; + label = "internet"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0port>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; &uart0 { diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index 172a38c0b8a9..327023a477b8 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -112,6 +112,8 @@ }; dsa { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <1>; #size-cells = <0>; @@ -159,6 +161,53 @@ &mdio { status = "okay"; + + switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0port>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; ð0 { diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts index 6f771a99cb02..9ec5a65561e9 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts @@ -19,11 +19,6 @@ model = "Marvell RD88f6281 Reference design, with A0 or higher SoC"; compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood"; - dsa { - switch@0 { - reg = <10 0>; /* MDIO address 10, switch 0 in tree */ - }; - }; }; &mdio { @@ -34,6 +29,10 @@ }; }; +&switch { + reg = <10>; +}; + ð1 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts index 1a797381d3d4..6a4a65ec7944 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts @@ -33,3 +33,14 @@ ð1 { status = "disabled"; }; + +&switch { + reg = <0>; + + ports { + port@4 { + reg = <4>; + label = "wan"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi index d5aacf137e40..91f5da5dae5f 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi @@ -54,6 +54,8 @@ }; dsa { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -115,6 +117,48 @@ &mdio { status = "okay"; + + switch: switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0port>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + }; + }; }; ð0 { diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts index da8598402ab8..38faa90007d7 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -158,7 +158,7 @@ &mmc1 { interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins &mmc1_cd>; + pinctrl-0 = <&mmc1_pins>; wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>; /* gpio_110 */ vmmc-supply = <&vmmc1>; @@ -193,7 +193,8 @@ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ - OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 sdmmc1_wp*/ + OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 */ + OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */ >; }; @@ -242,12 +243,6 @@ OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* sys_boot6.gpio_8 */ >; }; - - mmc1_cd: pinmux_mmc1_cd { - pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */ - >; - }; }; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 282d854f4342..45ea57fafa18 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -110,11 +110,11 @@ ranges; gic: interrupt-controller@1400000 { - compatible = "arm,cortex-a7-gic"; + compatible = "arm,gic-400", "arm,cortex-a7-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x0 0x1401000 0x0 0x1000>, - <0x0 0x1402000 0x0 0x1000>, + <0x0 0x1402000 0x0 0x2000>, <0x0 0x1404000 0x0 0x2000>, <0x0 0x1406000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts index 082ca8807c62..a4837985b7a7 100644 --- a/arch/arm/boot/dts/mt2701-evb.dts +++ b/arch/arm/boot/dts/mt2701-evb.dts @@ -24,6 +24,60 @@ }; }; +&auxadc { + status = "okay"; +}; + +&pio { + spi_pins_a: spi0@0 { + pins_spi { + pinmux = <MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS>, + <MT2701_PIN_54_SPI0_CK__FUNC_SPI0_CK>, + <MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MI>, + <MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MO>; + bias-disable; + }; + }; + + spi_pins_b: spi1@0 { + pins_spi { + pinmux = <MT2701_PIN_7_SPI1_CSN__FUNC_SPI1_CS>, + <MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MI>, + <MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MO>, + <MT2701_PIN_199_SPI1_CLK__FUNC_SPI1_CK>; + bias-disable; + }; + }; + + spi_pins_c: spi2@0 { + pins_spi { + pinmux = <MT2701_PIN_101_SPI2_CSN__FUNC_SPI2_CS>, + <MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MI>, + <MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MO>, + <MT2701_PIN_104_SPI2_CLK__FUNC_SPI2_CK>; + bias-disable; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_a>; + status = "disabled"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_b>; + status = "disabled"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_c>; + status = "disabled"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 7eab6f4c4665..803721050116 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -13,6 +13,7 @@ */ #include <dt-bindings/clock/mt2701-clk.h> +#include <dt-bindings/power/mt2701-power.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/mt2701-resets.h> @@ -87,6 +88,36 @@ clock-output-names = "rtc32k"; }; + thermal-zones { + cpu_thermal: cpu_thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + thermal-sensors = <&thermal 0>; + sustainable-power = <1000>; + + trips { + threshold: trip-point@0 { + temperature = <68000>; + hysteresis = <2000>; + type = "passive"; + }; + + target: trip-point@1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit@0 { + temperature = <115000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupt-parent = <&gic>; @@ -96,24 +127,6 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; - pio: pinctrl@10005000 { - compatible = "mediatek,mt2701-pinctrl"; - reg = <0 0x1000b000 0 0x1000>; - mediatek,pctl-regmap = <&syscfg_pctl_a>; - pins-are-numbered; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - }; - - syscfg_pctl_a: syscfg@10005000 { - compatible = "mediatek,mt2701-pctl-a-syscfg", "syscon"; - reg = <0 0x10005000 0 0x1000>; - }; - topckgen: syscon@10000000 { compatible = "mediatek,mt2701-topckgen", "syscon"; reg = <0 0x10000000 0 0x1000>; @@ -134,6 +147,22 @@ #reset-cells = <1>; }; + syscfg_pctl_a: syscfg@10005000 { + compatible = "mediatek,mt2701-pctl-a-syscfg", "syscon"; + reg = <0 0x10005000 0 0x1000>; + }; + + scpsys: scpsys@10006000 { + compatible = "mediatek,mt2701-scpsys", "syscon"; + #power-domain-cells = <1>; + reg = <0 0x10006000 0 0x1000>; + infracfg = <&infracfg>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_MFG_SEL>, + <&topckgen CLK_TOP_ETHIF_SEL>; + clock-names = "mm", "mfg", "ethif"; + }; + watchdog: watchdog@10007000 { compatible = "mediatek,mt2701-wdt", "mediatek,mt6589-wdt"; @@ -149,6 +178,29 @@ clock-names = "system-clk", "rtc-clk"; }; + pio: pinctrl@1000b000 { + compatible = "mediatek,mt2701-pinctrl"; + reg = <0 0x1000b000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl_a>; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + }; + + smi_common: smi@1000c000 { + compatible = "mediatek,mt2701-smi-common"; + reg = <0 0x1000c000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_SMI>, + <&mmsys CLK_MM_SMI_COMMON>, + <&infracfg CLK_INFRA_SMI>; + clock-names = "apb", "smi", "async"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; + }; + sysirq: interrupt-controller@10200100 { compatible = "mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq"; @@ -158,6 +210,16 @@ reg = <0 0x10200100 0 0x1c>; }; + iommu: mmsys_iommu@10205000 { + compatible = "mediatek,mt2701-m4u"; + reg = <0 0x10205000 0 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_M4U>; + clock-names = "bclk"; + mediatek,larbs = <&larb0 &larb1 &larb2>; + #iommu-cells = <1>; + }; + apmixedsys: syscon@10209000 { compatible = "mediatek,mt2701-apmixedsys", "syscon"; reg = <0 0x10209000 0 0x1000>; @@ -170,11 +232,20 @@ #interrupt-cells = <3>; interrupt-parent = <&gic>; reg = <0 0x10211000 0 0x1000>, - <0 0x10212000 0 0x1000>, + <0 0x10212000 0 0x2000>, <0 0x10214000 0 0x2000>, <0 0x10216000 0 0x2000>; }; + auxadc: adc@11001000 { + compatible = "mediatek,mt2701-auxadc"; + reg = <0 0x11001000 0 0x1000>; + clocks = <&pericfg CLK_PERI_AUXADC>; + clock-names = "main"; + #io-channel-cells = <1>; + status = "disabled"; + }; + uart0: serial@11002000 { compatible = "mediatek,mt2701-uart", "mediatek,mt6577-uart"; @@ -214,4 +285,144 @@ clock-names = "baud", "bus"; status = "disabled"; }; + + spi0: spi@1100a000 { + compatible = "mediatek,mt2701-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x100>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI0_SEL>, + <&pericfg CLK_PERI_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + thermal: thermal@1100b000 { + #thermal-sensor-cells = <0>; + compatible = "mediatek,mt2701-thermal"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; + clock-names = "therm", "auxadc"; + resets = <&pericfg MT2701_PERI_THERM_SW_RST>; + reset-names = "therm"; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + }; + + nandc: nfi@1100d000 { + compatible = "mediatek,mt2701-nfc"; + reg = <0 0x1100d000 0 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_NFI>, + <&pericfg CLK_PERI_NFI_PAD>; + clock-names = "nfi_clk", "pad_clk"; + status = "disabled"; + ecc-engine = <&bch>; + #address-cells = <1>; + #size-cells = <0>; + }; + + bch: ecc@1100e000 { + compatible = "mediatek,mt2701-ecc"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_NFI_ECC>; + clock-names = "nfiecc_clk"; + status = "disabled"; + }; + + spi1: spi@11016000 { + compatible = "mediatek,mt2701-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11016000 0 0x100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI1_SEL>, + <&pericfg CLK_PERI_SPI1>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi2: spi@11017000 { + compatible = "mediatek,mt2701-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11017000 0 0x1000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI2_SEL>, + <&pericfg CLK_PERI_SPI2>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + mmsys: syscon@14000000 { + compatible = "mediatek,mt2701-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb0: larb@14010000 { + compatible = "mediatek,mt2701-smi-larb"; + reg = <0 0x14010000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&mmsys CLK_MM_SMI_LARB0>, + <&mmsys CLK_MM_SMI_LARB0>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; + }; + + imgsys: syscon@15000000 { + compatible = "mediatek,mt2701-imgsys", "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb2: larb@15001000 { + compatible = "mediatek,mt2701-smi-larb"; + reg = <0 0x15001000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&imgsys CLK_IMG_SMI_COMM>, + <&imgsys CLK_IMG_SMI_COMM>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + }; + + vdecsys: syscon@16000000 { + compatible = "mediatek,mt2701-vdecsys", "syscon"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb1: larb@16010000 { + compatible = "mediatek,mt2701-smi-larb"; + reg = <0 0x16010000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&vdecsys CLK_VDEC_CKGEN>, + <&vdecsys CLK_VDEC_LARB>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>; + }; + + hifsys: syscon@1a000000 { + compatible = "mediatek,mt2701-hifsys", "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + }; + + ethsys: syscon@1b000000 { + compatible = "mediatek,mt2701-ethsys", "syscon"; + reg = <0 0x1b000000 0 0x1000>; + #clock-cells = <1>; + }; + + bdpsys: syscon@1c000000 { + compatible = "mediatek,mt2701-bdpsys", "syscon"; + reg = <0 0x1c000000 0 0x1000>; + #clock-cells = <1>; + }; }; diff --git a/arch/arm/boot/dts/mt6580.dtsi b/arch/arm/boot/dts/mt6580.dtsi index 06fdf6c2d5fd..a349dba5ff79 100644 --- a/arch/arm/boot/dts/mt6580.dtsi +++ b/arch/arm/boot/dts/mt6580.dtsi @@ -91,7 +91,7 @@ #interrupt-cells = <3>; interrupt-parent = <&gic>; reg = <0x10211000 0x1000>, - <0x10212000 0x1000>, + <0x10212000 0x2000>, <0x10214000 0x2000>, <0x10216000 0x2000>; }; diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi index 88b3cb128698..0d6f60af7640 100644 --- a/arch/arm/boot/dts/mt6589.dtsi +++ b/arch/arm/boot/dts/mt6589.dtsi @@ -102,7 +102,7 @@ #interrupt-cells = <3>; interrupt-parent = <&gic>; reg = <0x10211000 0x1000>, - <0x10212000 0x1000>, + <0x10212000 0x2000>, <0x10214000 0x2000>, <0x10216000 0x2000>; }; diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts index a9ee2d64c6f7..b60b41cad592 100644 --- a/arch/arm/boot/dts/mt7623-evb.dts +++ b/arch/arm/boot/dts/mt7623-evb.dts @@ -1,6 +1,6 @@ /* * Copyright (c) 2016 MediaTek Inc. - * Author: John Crispin <blogic@openwrt.org> + * Author: John Crispin <john@phrozen.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index fd2b614ae6f3..402579ab70d2 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -1,6 +1,6 @@ /* * Copyright (c) 2016 MediaTek Inc. - * Author: John Crispin <blogic@openwrt.org> + * Author: John Crispin <john@phrozen.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -104,7 +104,7 @@ #interrupt-cells = <3>; interrupt-parent = <&gic>; reg = <0 0x10211000 0 0x1000>, - <0 0x10212000 0 0x1000>, + <0 0x10212000 0 0x2000>, <0 0x10214000 0 0x2000>, <0 0x10216000 0 0x2000>; }; diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi index 52086c8018e2..916c095d11b9 100644 --- a/arch/arm/boot/dts/mt8127.dtsi +++ b/arch/arm/boot/dts/mt8127.dtsi @@ -129,7 +129,7 @@ #interrupt-cells = <3>; interrupt-parent = <&gic>; reg = <0 0x10211000 0 0x1000>, - <0 0x10212000 0 0x1000>, + <0 0x10212000 0 0x2000>, <0 0x10214000 0 0x2000>, <0 0x10216000 0 0x2000>; }; diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi index 1d7f92bdcb9c..a97b4ee4ae79 100644 --- a/arch/arm/boot/dts/mt8135.dtsi +++ b/arch/arm/boot/dts/mt8135.dtsi @@ -221,7 +221,7 @@ #interrupt-cells = <3>; interrupt-parent = <&gic>; reg = <0 0x10211000 0 0x1000>, - <0 0x10212000 0 0x1000>, + <0 0x10212000 0 0x2000>, <0 0x10214000 0 0x2000>, <0 0x10216000 0 0x2000>; }; diff --git a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi index e211a3c47a76..e172029a0c4d 100644 --- a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi +++ b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi index 68d75e79a360..c2d87ba6190a 100644 --- a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi +++ b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 4f793a025a72..f1d6de8b3c19 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -17,6 +17,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { serial0 = &uart1; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 85e297ed0ea1..673cee2234b2 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -27,6 +27,7 @@ aliases { display0 = &dvi0; display1 = &tv0; + ethernet = ðernet; }; leds { @@ -348,6 +349,21 @@ &usbhsehci { phys = <0 &hsusb2_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + hub@2 { + compatible = "usb424,9514"; + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; }; &vaux2 { diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 54c4c07bbe4a..e268efde6c6d 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -126,27 +126,6 @@ #address-cells = <1>; #size-cells = <1>; - - partition@0 { - label = "SPL"; - reg = <0 0x100000>; - }; - partition@80000 { - label = "U-Boot"; - reg = <0x100000 0x180000>; - }; - partition@1c0000 { - label = "Environment"; - reg = <0x280000 0x100000>; - }; - partition@280000 { - label = "Kernel"; - reg = <0x380000 0x300000>; - }; - partition@780000 { - label = "Filesystem"; - reg = <0x680000 0x1f980000>; - }; }; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 87ca50b53002..b64cfda8dbb7 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -47,7 +47,7 @@ compatible = "gpio-leds"; heartbeat { label = "debug::sleep"; - gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio162 */ + gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* 162 */ linux,default-trigger = "default-on"; pinctrl-names = "default"; pinctrl-0 = <&debug_leds>; @@ -625,6 +625,7 @@ reg = <0x55>; }; + /* Stereo headphone amplifier */ tpa6130a2: tpa6130a2@60 { compatible = "ti,tpa6130a2"; reg = <0x60>; @@ -734,6 +735,8 @@ vmmc_aux-supply = <&vsim>; bus-width = <8>; non-removable; + no-sdio; + no-sd; }; &mmc3 { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index ecf5eb584c75..a3ff4933dbc1 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -17,6 +17,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 1673689e6705..edbc4090297d 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -16,6 +16,7 @@ aliases { display0 = &dvi0; display1 = &hdmi0; + ethernet = ðernet; }; leds: leds { @@ -520,6 +521,21 @@ &usbhsehci { phys = <&hsusb1_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; }; &dss { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 8087456b5fbe..578c53f08309 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -15,6 +15,7 @@ interrupt-parent = <&wakeupgen>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts index 8fc19218057e..fef2a446b61c 100644 --- a/arch/arm/boot/dts/omap5-igep0050.dts +++ b/arch/arm/boot/dts/omap5-igep0050.dts @@ -19,6 +19,10 @@ reg = <0x0 0x80000000 0 0x7f000000>; /* 2032 MB */ }; + aliases { + ethernet = ðernet; + }; + gpio_keys { compatible = "gpio-keys"; pinctrl-0 = <&power_button_pin>; @@ -116,3 +120,20 @@ OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */ >; }; + +&usbhsehci { + #address-cells = <1>; + #size-cells = <0>; + + hub@2 { + compatible = "usb424,3503"; + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@3 { + compatible = "usb424,7500"; + reg = <3>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index a8c72611fbe3..0d42c46f13e7 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -18,6 +18,10 @@ reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */ }; + aliases { + ethernet = ðernet; + }; + leds { compatible = "gpio-leds"; led1 { @@ -164,6 +168,23 @@ >; }; +&usbhsehci { + #address-cells = <1>; + #size-cells = <0>; + + hub@2 { + compatible = "usb424,3503"; + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + ethernet: usbether@3 { + compatible = "usb424,9730"; + reg = <3>; + }; +}; + &wlcore { compatible = "ti,wl1837"; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 968c67a49dbd..222155ca8ad7 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -17,6 +17,7 @@ compatible = "ti,omap5"; interrupt-parent = <&wakeupgen>; + chosen { }; aliases { i2c0 = &i2c1; @@ -91,7 +92,7 @@ interrupt-controller; #interrupt-cells = <3>; reg = <0 0x48211000 0 0x1000>, - <0 0x48212000 0 0x1000>, + <0 0x48212000 0 0x2000>, <0 0x48214000 0 0x2000>, <0 0x48216000 0 0x2000>; interrupt-parent = <&gic>; @@ -987,6 +988,7 @@ phy-names = "sata-phy"; clocks = <&sata_ref_clk>; ti,hwmods = "sata"; + ports-implemented = <0x1>; }; dss: dss@58000000 { diff --git a/arch/arm/boot/dts/orion5x-kuroboxpro.dts b/arch/arm/boot/dts/orion5x-kuroboxpro.dts index 1a672b098d0b..e28b568e741a 100644 --- a/arch/arm/boot/dts/orion5x-kuroboxpro.dts +++ b/arch/arm/boot/dts/orion5x-kuroboxpro.dts @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/orion5x-lschl.dts b/arch/arm/boot/dts/orion5x-linkstation-lschl.dts index 947409252845..ee751995c8d0 100644 --- a/arch/arm/boot/dts/orion5x-lschl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lschl.dts @@ -2,7 +2,7 @@ * Device Tree file for Buffalo Linkstation LS-CHLv3 * * Copyright (C) 2016 Ash Hughes <ashley.hughes@blueyonder.co.uk> - * Copyright (C) 2015, 2016 + * Copyright (C) 2015-2017 * Roger Shimizu <rogershimizu@gmail.com> * * This file is dual-licensed: you can use it either under the terms @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -52,7 +52,7 @@ #include <dt-bindings/gpio/gpio.h> / { - model = "Buffalo Linkstation Live v3 (LS-CHL)"; + model = "Buffalo Linkstation LiveV3 (LS-CHL)"; compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { /* 128 MB */ diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts index 51dc734cd5b9..9f6fedd39170 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts @@ -18,17 +18,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -37,11 +37,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts index 0eead400f427..7f77ce8cc1fc 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi index ed456ab35fd8..e9991c83d7b7 100644 --- a/arch/arm/boot/dts/orion5x-linkstation.dtsi +++ b/arch/arm/boot/dts/orion5x-linkstation.dtsi @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/orion5x-lswsgl.dts b/arch/arm/boot/dts/orion5x-lswsgl.dts index 6b47a52ceb9c..ea966ec03dd0 100644 --- a/arch/arm/boot/dts/orion5x-lswsgl.dts +++ b/arch/arm/boot/dts/orion5x-lswsgl.dts @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi index ce13705c38d4..46aa6db8353a 100644 --- a/arch/arm/boot/dts/ox810se.dtsi +++ b/arch/arm/boot/dts/ox810se.dtsi @@ -7,6 +7,8 @@ */ /include/ "skeleton.dtsi" +#include <dt-bindings/clock/oxsemi,ox810se.h> +#include <dt-bindings/reset/oxsemi,ox810se.h> / { compatible = "oxsemi,ox810se"; @@ -242,7 +244,7 @@ current-speed = <115200>; no-loopback-test; status = "disabled"; - resets = <&reset 17>; + resets = <&reset RESET_UART1>; }; uart1: serial@300000 { @@ -256,7 +258,7 @@ current-speed = <115200>; no-loopback-test; status = "disabled"; - resets = <&reset 18>; + resets = <&reset RESET_UART2>; }; uart2: serial@900000 { @@ -270,7 +272,7 @@ current-speed = <115200>; no-loopback-test; status = "disabled"; - resets = <&reset 22>; + resets = <&reset RESET_UART3>; }; uart3: serial@a00000 { @@ -284,7 +286,7 @@ current-speed = <115200>; no-loopback-test; status = "disabled"; - resets = <&reset 23>; + resets = <&reset RESET_UART4>; }; }; diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi index e40f282a023a..459207536a46 100644 --- a/arch/arm/boot/dts/ox820.dtsi +++ b/arch/arm/boot/dts/ox820.dtsi @@ -8,6 +8,8 @@ /include/ "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/oxsemi,ox820.h> +#include <dt-bindings/reset/oxsemi,ox820.h> / { compatible = "oxsemi,ox820"; @@ -83,8 +85,8 @@ nandc: nand-controller@41000000 { compatible = "oxsemi,ox820-nand"; reg = <0x41000000 0x100000>; - clocks = <&stdclk 11>; - resets = <&reset 15>; + clocks = <&stdclk CLK_820_NAND>; + resets = <&reset RESET_NAND>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -99,9 +101,9 @@ mac-address = [000000000000]; /* Filled in by U-Boot */ phy-mode = "rgmii"; - clocks = <&stdclk 9>, <&gmacclk>; + clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>; clock-names = "gmac", "stmmaceth"; - resets = <&reset 6>; + resets = <&reset RESET_MAC>; /* Regmap for sys registers */ oxsemi,sys-ctrl = <&sys>; @@ -208,7 +210,7 @@ no-loopback-test; status = "disabled"; clocks = <&sysclk>; - resets = <&reset 17>; + resets = <&reset RESET_UART1>; }; uart1: serial@300000 { @@ -222,7 +224,7 @@ no-loopback-test; status = "disabled"; clocks = <&sysclk>; - resets = <&reset 18>; + resets = <&reset RESET_UART2>; }; rps@400000 { diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 4b8872cc8bf9..39d9e6ddefed 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -220,6 +220,14 @@ function = "ebi2"; }; }; + + /* Interrupt line for the KXSD9 accelerometer */ + dragon_kxsd9_gpios: kxsd9 { + irq { + pins = "gpio57"; /* IRQ line */ + bias-pull-up; + }; + }; }; qcom,ssbi@500000 { @@ -272,6 +280,15 @@ power-source = <PM8058_GPIO_S3>; }; }; + dragon_mpu3050_gpios: mpu3050-gpios { + pinconf { + pins = "gpio17"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; dragon_sdcc3_gpios: sdcc3-gpios { pinconf { pins = "gpio22"; @@ -369,8 +386,8 @@ ak8975@0c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; - /* GPIO33 has interrupt 224 on the PM8058 */ - interrupt-parent = <&pm8058_gpio>; + /* FIXME: GPIO33 has interrupt 224 on the PM8058 */ + interrupt-parent = <&pm8058>; interrupts = <224 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&dragon_ak8975_gpios>; @@ -380,8 +397,8 @@ bmp085@77 { compatible = "bosch,bmp085"; reg = <0x77>; - /* GPIO16 has interrupt 207 on the PM8058 */ - interrupt-parent = <&pm8058_gpio>; + /* FIXME: GPIO16 has interrupt 207 on the PM8058 */ + interrupt-parent = <&pm8058>; interrupts = <207 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -389,6 +406,41 @@ vddd-supply = <&pm8058_lvs0>; // 1.8V vdda-supply = <&pm8058_l14>; // 2.85V }; + mpu3050@68 { + compatible = "invensense,mpu3050"; + reg = <0x68>; + /* + * GPIO17 has interrupt 208 on the + * PM8058, it is pulled high by a 10k + * resistor to VLOGIC so needs to be + * active low/falling edge. + */ + interrupts-extended = <&pm8058 208 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_mpu3050_gpios>; + vlogic-supply = <&pm8058_lvs0>; // 1.8V + vdd-supply = <&pm8058_l14>; // 2.85V + + /* + * The MPU-3050 acts as a hub for the + * accelerometer. + */ + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + + kxsd9@18 { + compatible = "kionix,kxsd9"; + reg = <0x18>; + interrupt-parent = <&tlmm>; + interrupts = <57 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_kxsd9_gpios>; + iovdd-supply = <&pm8058_lvs0>; // 1.8V + vdd-supply = <&pm8058_l14>; // 2.85V + }; + }; + }; }; }; @@ -412,7 +464,7 @@ * The second interrupt is the PME interrupt * for network wakeup, connected to the TLMM. */ - interrupts-extended = <&pmicintc 198 IRQ_TYPE_EDGE_FALLING>, + interrupts-extended = <&pm8058 198 IRQ_TYPE_EDGE_FALLING>, <&tlmm 29 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; vdd33a-supply = <&dragon_veth>; diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts index 39ae2bc8cb08..8f5de029bca9 100644 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts @@ -39,6 +39,17 @@ }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + soc { rpm@108000 { regulators { @@ -74,6 +85,14 @@ bias-pull-down; }; + s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + regulator-always-on; + }; + s3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1400000>; @@ -121,6 +140,16 @@ bias-pull-down; }; + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + l23 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; @@ -347,5 +376,45 @@ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>; }; }; + + riva-pil@3204000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; + }; + + hdmi-tx@4a00000 { + status = "okay"; + core-vdda-supply = <&pm8921_hdmi_switch>; + hdmi-mux-supply = <&vcc3v3>; + + hpd-gpio = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + + hdmi-phy@4a00400 { + status = "okay"; + core-vdda-supply = <&pm8921_hdmi_switch>; + }; + + mdp@5100000 { + status = "okay"; + + ports { + port@3 { + endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 3d37cab3b9a9..881ce707311a 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -75,25 +75,6 @@ bias-disable; }; }; - - hdmi_pinctrl: hdmi-pinctrl { - mux { - pins = "gpio70", "gpio71", "gpio72"; - function = "hdmi"; - }; - - pinconf_ddc { - pins = "gpio70", "gpio71"; - bias-pull-up; - drive-strength = <2>; - }; - - pinconf_hpd { - pins = "gpio72"; - bias-pull-down; - drive-strength = <16>; - }; - }; }; rpm@108000 { @@ -368,9 +349,6 @@ hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_pinctrl>; - ports { port@0 { endpoint { diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi index 6b801e7e57a2..173ab7c299ce 100644 --- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi @@ -284,4 +284,41 @@ bias-disable = <0>; }; }; + + riva_fm_pin_a: riva-fm-active { + pins = "gpio14", "gpio15"; + function = "riva_fm"; + }; + + riva_bt_pin_a: riva-bt-active { + pins = "gpio16", "gpio17"; + function = "riva_bt"; + }; + + riva_wlan_pin_a: riva-wlan-active { + pins = "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; + function = "riva_wlan"; + + drive-strength = <6>; + bias-pull-down; + }; + + hdmi_pinctrl: hdmi-pinctrl { + mux { + pins = "gpio70", "gpio71", "gpio72"; + function = "hdmi"; + }; + + pinconf_ddc { + pins = "gpio70", "gpio71"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf_hpd { + pins = "gpio72"; + bias-pull-down; + drive-strength = <16>; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts index ebd675ca94b4..a34ba3555454 100644 --- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts +++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts @@ -390,5 +390,12 @@ pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>; }; }; + + riva-pil@3204000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 268bd470c865..14a6f5ed02de 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/clock/qcom,gcc-msm8960.h> #include <dt-bindings/reset/qcom,gcc-msm8960.h> #include <dt-bindings/clock/qcom,mmcc-msm8960.h> +#include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/soc/qcom,gsbi.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -21,13 +22,18 @@ reg = <0x80000000 0x200000>; no-map; }; + + wcnss_mem: wcnss@8f000000 { + reg = <0x8f000000 0x700000>; + no-map; + }; }; cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + CPU0: cpu@0 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -38,7 +44,7 @@ cpu-idle-states = <&CPU_SPC>; }; - cpu@1 { + CPU1: cpu@1 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -49,7 +55,7 @@ cpu-idle-states = <&CPU_SPC>; }; - cpu@2 { + CPU2: cpu@2 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -60,7 +66,7 @@ cpu-idle-states = <&CPU_SPC>; }; - cpu@3 { + CPU3: cpu@3 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -179,7 +185,7 @@ }; clocks { - cxo_board { + cxo_board: cxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; @@ -303,6 +309,9 @@ firmware { scm { compatible = "qcom,scm-apq8064"; + + clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>; + clock-names = "core"; }; }; @@ -627,6 +636,33 @@ clock-names = "core"; }; + ssbi@c00000 { + compatible = "qcom,ssbi"; + reg = <0x00c00000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + + pm8821: pmic@1 { + compatible = "qcom,pm8821"; + interrupt-parent = <&tlmm_pinmux>; + interrupts = <76 IRQ_TYPE_LEVEL_LOW>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pm8821_mpps: mpps@50 { + compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp"; + reg = <0x50>; + interrupts = <24 IRQ_TYPE_NONE>, + <25 IRQ_TYPE_NONE>, + <26 IRQ_TYPE_NONE>, + <27 IRQ_TYPE_NONE>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; + qcom,ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x00500000 0x1000>; @@ -1323,6 +1359,8 @@ hdmi: hdmi-tx@4a00000 { compatible = "qcom,hdmi-tx-8960"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pinctrl>; reg = <0x04a00000 0x2f0>; reg-names = "core_physical"; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; @@ -1416,6 +1454,249 @@ }; }; }; + + riva: riva-pil@3204000 { + compatible = "qcom,riva-pil"; + + reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>; + reg-names = "ccu", "dxe", "pmu"; + + interrupts-extended = <&intc GIC_SPI 199 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smsm 6 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal"; + + memory-region = <&wcnss_mem>; + + vddcx-supply = <&pm8921_s3>; + vddmx-supply = <&pm8921_l24>; + vddpx-supply = <&pm8921_s4>; + + status = "disabled"; + + iris { + compatible = "qcom,wcn3660"; + + clocks = <&cxo_board>; + clock-names = "xo"; + + vddxo-supply = <&pm8921_l4>; + vddrfa-supply = <&pm8921_s2>; + vddpa-supply = <&pm8921_l10>; + vdddig-supply = <&pm8921_lvs2>; + }; + + smd-edge { + interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&l2cc 8 25>; + qcom,smd-edge = <6>; + + label = "riva"; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&riva>; + + bt { + compatible = "qcom,wcnss-bt"; + }; + + wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + }; + }; + }; + }; + + etb@1a01000 { + compatible = "coresight-etb10", "arm,primecell"; + reg = <0x1a01000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + port { + etb_in: endpoint { + slave-mode; + remote-endpoint = <&replicator_out0>; + }; + }; + }; + + tpiu@1a03000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x1a03000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + port { + tpiu_in: endpoint { + slave-mode; + remote-endpoint = <&replicator_out1>; + }; + }; + }; + + replicator { + compatible = "arm,coresight-replicator"; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etb_in>; + }; + }; + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&tpiu_in>; + }; + }; + port@2 { + reg = <0>; + replicator_in: endpoint { + slave-mode; + remote-endpoint = <&funnel_out>; + }; + }; + }; + }; + + funnel@1a04000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x1a04000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * Not described input ports: + * 2 - connected to STM component + * 3 - not-connected + * 6 - not-connected + * 7 - not-connected + */ + port@0 { + reg = <0>; + funnel_in0: endpoint { + slave-mode; + remote-endpoint = <&etm0_out>; + }; + }; + port@1 { + reg = <1>; + funnel_in1: endpoint { + slave-mode; + remote-endpoint = <&etm1_out>; + }; + }; + port@4 { + reg = <4>; + funnel_in4: endpoint { + slave-mode; + remote-endpoint = <&etm2_out>; + }; + }; + port@5 { + reg = <5>; + funnel_in5: endpoint { + slave-mode; + remote-endpoint = <&etm3_out>; + }; + }; + port@8 { + reg = <0>; + funnel_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + }; + + etm@1a1c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1c000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU0>; + + port { + etm0_out: endpoint { + remote-endpoint = <&funnel_in0>; + }; + }; + }; + + etm@1a1d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1d000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + + port { + etm1_out: endpoint { + remote-endpoint = <&funnel_in1>; + }; + }; + }; + + etm@1a1e000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1e000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU2>; + + port { + etm2_out: endpoint { + remote-endpoint = <&funnel_in4>; + }; + }; + }; + + etm@1a1f000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1f000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU3>; + + port { + etm3_out: endpoint { + remote-endpoint = <&funnel_in5>; + }; + }; + }; }; }; #include "qcom-apq8064-pins.dtsi" diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 2e375576ffd0..76f4e8921d58 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -65,13 +65,13 @@ cxo_board { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <19200000>; + clock-frequency = <25000000>; }; pxo_board { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <27000000>; + clock-frequency = <25000000>; }; sleep_clk: sleep_clk { diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index 5ae4ec59e6ea..c852b69229c9 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -357,7 +357,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 23de764558ab..1adc04978a47 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -48,7 +48,7 @@ }; }; -&pmicintc { +&pm8058 { keypad@148 { linux,keymap = < MATRIX_KEY(0, 0, KEY_FN_F1) diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 4d828f810746..91c9a62ae725 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -163,7 +163,7 @@ reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - pmicintc: pmic@0 { + pm8058: pmic@0 { compatible = "qcom,pm8058"; interrupt-parent = <&tlmm>; interrupts = <88 8>; @@ -176,7 +176,7 @@ compatible = "qcom,pm8058-gpio", "qcom,ssbi-gpio"; reg = <0x150>; - interrupt-parent = <&pmicintc>; + interrupt-parent = <&pm8058>; interrupts = <192 IRQ_TYPE_NONE>, <193 IRQ_TYPE_NONE>, <194 IRQ_TYPE_NONE>, @@ -232,7 +232,7 @@ reg = <0x50>; gpio-controller; #gpio-cells = <2>; - interrupt-parent = <&pmicintc>; + interrupt-parent = <&pm8058>; interrupts = <128 IRQ_TYPE_NONE>, <129 IRQ_TYPE_NONE>, @@ -251,7 +251,7 @@ pwrkey@1c { compatible = "qcom,pm8058-pwrkey"; reg = <0x1c>; - interrupt-parent = <&pmicintc>; + interrupt-parent = <&pm8058>; interrupts = <50 1>, <51 1>; debounce = <15625>; pull-up; @@ -260,7 +260,7 @@ keypad@148 { compatible = "qcom,pm8058-keypad"; reg = <0x148>; - interrupt-parent = <&pmicintc>; + interrupt-parent = <&pm8058>; interrupts = <74 1>, <75 1>; debounce = <15>; scan-delay = <32>; @@ -270,7 +270,7 @@ rtc@1e8 { compatible = "qcom,pm8058-rtc"; reg = <0x1e8>; - interrupt-parent = <&pmicintc>; + interrupt-parent = <&pm8058>; interrupts = <39 1>; allow-set-time; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index e7c1577d56f4..96c853bab8ba 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -413,6 +413,14 @@ dma-controller@f9944000 { qcom,controlled-remotely; }; + + usb-phy@f9a55000 { + status = "ok"; + }; + + usb@f9a55000 { + status = "ok"; + }; }; &spmi_bus { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 49d579f28865..d3e1a61b8671 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/reset/qcom,gcc-msm8974.h> #include "skeleton.dtsi" / { @@ -30,7 +31,7 @@ no-map; }; - adsp@0dc00000 { + adsp_region: adsp@0dc00000 { reg = <0x0dc00000 0x1900000>; no-map; }; @@ -59,11 +60,6 @@ reg = <0x0fd80000 0x180000>; no-map; }; - - unused@0ff00000 { - reg = <0x0ff00000 0x10100000>; - no-map; - }; }; cpus { @@ -242,6 +238,24 @@ clock-frequency = <19200000>; }; + adsp-pil { + compatible = "qcom,msm8974-adsp-pil"; + + interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + cx-supply = <&pm8841_s2>; + + memory-region = <&adsp_region>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + }; + smem { compatible = "qcom,smem"; @@ -251,6 +265,31 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupt-parent = <&intc>; + interrupts = <0 158 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + smp2p-modem { compatible = "qcom,smp2p"; qcom,smem = <435>, <428>; @@ -655,11 +694,56 @@ #dma-cells = <1>; qcom,ee = <0>; }; + + usb1_phy: usb-phy@f9a55000 { + compatible = "qcom,usb-otg-snps"; + + reg = <0xf9a55000 0x400>; + interrupts-extended = <&intc 0 134 0>, <&intc 0 140 0>, + <&spmi_bus 0 0x9 0 0>; + interrupt-names = "core_irq", "async_irq", "pmic_id_irq"; + + vddcx-supply = <&pm8841_s2>; + v3p3-supply = <&pm8941_l24>; + v1p8-supply = <&pm8941_l6>; + + dr_mode = "otg"; + qcom,phy-init-sequence = <0x63 0x81 0xfffffff>; + qcom,otg-control = <1>; + qcom,phy-num = <0>; + + resets = <&gcc GCC_USB2A_PHY_BCR>, <&gcc GCC_USB_HS_BCR>; + reset-names = "phy", "link"; + + clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>, + <&gcc GCC_USB_HS_AHB_CLK>; + clock-names = "phy", "core", "iface"; + + status = "disabled"; + }; + + usb@f9a55000 { + compatible = "qcom,ci-hdrc"; + reg = <0xf9a55000 0x400>; + dr_mode = "otg"; + interrupts = <0 134 0>, <0 140 0>; + interrupt-names = "core_irq", "async_irq"; + usb-phy = <&usb1_phy>; + + status = "disabled"; + }; }; smd { compatible = "qcom,smd"; + adsp { + interrupts = <0 156 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 8>; + qcom,smd-edge = <1>; + }; + modem { interrupts = <0 25 IRQ_TYPE_EDGE_RISING>; diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts index dd4418195ca6..02b59c5b3c53 100644 --- a/arch/arm/boot/dts/r7s72100-rskrza1.dts +++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts @@ -61,6 +61,14 @@ status = "okay"; }; +&ostm0 { + status = "okay"; +}; + +&ostm1 { + status = "okay"; +}; + &scif2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 3dd427d68c83..b8aa256bd515 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -108,6 +108,15 @@ clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7"; }; + mstp5_clks: mstp5_clks@fcfe0428 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe0428 4>; + clocks = <&p0_clk>, <&p0_clk>; + clock-indices = <R7S72100_CLK_OSTM0 R7S72100_CLK_OSTM1>; + clock-output-names = "ostm0", "ostm1"; + }; + mstp7_clks: mstp7_clks@fcfe0430 { #clock-cells = <1>; compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -466,6 +475,7 @@ GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R7S72100_CLK_MMCIF>; + power-domains = <&cpg_clocks>; reg-io-width = <4>; bus-width = <8>; status = "disabled"; @@ -496,4 +506,22 @@ cap-sdio-irq; status = "disabled"; }; + + ostm0: timer@fcfec000 { + compatible = "renesas,r7s72100-ostm", "renesas,ostm"; + reg = <0xfcfec000 0x30>; + interrupts = <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>; + clocks = <&mstp5_clks R7S72100_CLK_OSTM0>; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + ostm1: timer@fcfec400 { + compatible = "renesas,r7s72100-ostm", "renesas,ostm"; + reg = <0xfcfec400 0x30>; + interrupts = <GIC_SPI 103 IRQ_TYPE_EDGE_RISING>; + clocks = <&mstp5_clks R7S72100_CLK_OSTM1>; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 53183ffe04c1..00eb9a7114dc 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -440,7 +440,7 @@ }; mmcif0: mmc@ee200000 { - compatible = "renesas,sh-mmcif"; + compatible = "renesas,mmcif-r8a73a4", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>; @@ -450,7 +450,7 @@ }; mmcif1: mmc@ee220000 { - compatible = "renesas,sh-mmcif"; + compatible = "renesas,mmcif-r8a73a4", "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>; @@ -465,7 +465,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 216cb1f37f87..d8393b97768b 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -55,11 +55,14 @@ #address-cells = <0>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; }; irqc: interrupt-controller@e61c0000 { @@ -102,10 +105,9 @@ #power-domain-cells = <0>; }; - sysc: system-controller@e6180000 { - compatible = "renesas,r8a7743-sysc"; - reg = <0 0xe6180000 0 0x200>; - #power-domain-cells = <1>; + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; }; rst: reset-controller@e6160000 { @@ -113,6 +115,12 @@ reg = <0 0xe6160000 0 0x100>; }; + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7743-sysc"; + reg = <0 0xe6180000 0 0x200>; + #power-domain-cells = <1>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7743", "renesas,rcar-dmac"; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index 0b2e2f37150f..1f65ff68a469 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -55,11 +55,14 @@ #address-cells = <0>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; }; irqc: interrupt-controller@e61c0000 { @@ -102,10 +105,9 @@ #power-domain-cells = <0>; }; - sysc: system-controller@e6180000 { - compatible = "renesas,r8a7745-sysc"; - reg = <0 0xe6180000 0 0x200>; - #power-domain-cells = <1>; + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; }; rst: reset-controller@e6160000 { @@ -113,6 +115,12 @@ reg = <0 0xe6160000 0 0x100>; }; + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7745-sysc"; + reg = <0 0xe6180000 0 0x200>; + #power-domain-cells = <1>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7745", "renesas,rcar-dmac"; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index d0db998effc8..1e93c94a9eac 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -150,7 +150,7 @@ i2c0: i2c@ffc70000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7778"; + compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c"; reg = <0xffc70000 0x1000>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C0>; @@ -161,7 +161,7 @@ i2c1: i2c@ffc71000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7778"; + compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c"; reg = <0xffc71000 0x1000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C1>; @@ -172,7 +172,7 @@ i2c2: i2c@ffc72000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7778"; + compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c"; reg = <0xffc72000 0x1000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C2>; @@ -183,7 +183,7 @@ i2c3: i2c@ffc73000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7778"; + compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c"; reg = <0xffc73000 0x1000>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C3>; @@ -369,7 +369,7 @@ }; mmcif: mmc@ffe4e000 { - compatible = "renesas,sh-mmcif"; + compatible = "renesas,mmcif-r8a7778", "renesas,sh-mmcif"; reg = <0xffe4e000 0x100>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_MMC>; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 676151b70185..89c5b24a3d03 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -216,6 +216,10 @@ }; }; +&sata { + status = "okay"; +}; + &scif2 { pinctrl-0 = <&scif2_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 55a7c1e37c57..ae2d9a9c65af 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -173,7 +173,7 @@ i2c0: i2c@ffc70000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7779"; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; reg = <0xffc70000 0x1000>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C0>; @@ -184,7 +184,7 @@ i2c1: i2c@ffc71000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7779"; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; reg = <0xffc71000 0x1000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C1>; @@ -195,7 +195,7 @@ i2c2: i2c@ffc72000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7779"; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; reg = <0xffc72000 0x1000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C2>; @@ -206,7 +206,7 @@ i2c3: i2c@ffc73000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7779"; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; reg = <0xffc73000 0x1000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C3>; @@ -347,6 +347,7 @@ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_SATA>; power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; }; sdhi0: sd@ffe4c000 { diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 0c8900d4b824..6d10450de6d7 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -183,7 +183,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; @@ -480,7 +480,7 @@ i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7790"; + compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C0>; @@ -492,7 +492,7 @@ i2c1: i2c@e6518000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7790"; + compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C1>; @@ -504,7 +504,7 @@ i2c2: i2c@e6530000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7790"; + compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C2>; @@ -516,7 +516,7 @@ i2c3: i2c@e6540000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7790"; + compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C3>; @@ -528,7 +528,8 @@ iic0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC0>; @@ -542,7 +543,8 @@ iic1: i2c@e6510000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC1>; @@ -556,7 +558,8 @@ iic2: i2c@e6520000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x425>; interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC2>; @@ -570,7 +573,8 @@ iic3: i2c@e60b0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>; @@ -883,7 +887,8 @@ }; usbphy: usb-phy@e6590100 { - compatible = "renesas,usb-phy-r8a7790"; + compatible = "renesas,usb-phy-r8a7790", + "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; #address-cells = <1>; #size-cells = <0>; @@ -1503,7 +1508,8 @@ }; msiof0: spi@e6e20000 { - compatible = "renesas,msiof-r8a7790"; + compatible = "renesas,msiof-r8a7790", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; @@ -1517,7 +1523,8 @@ }; msiof1: spi@e6e10000 { - compatible = "renesas,msiof-r8a7790"; + compatible = "renesas,msiof-r8a7790", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e10000 0 0x0064>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; @@ -1531,7 +1538,8 @@ }; msiof2: spi@e6e00000 { - compatible = "renesas,msiof-r8a7790"; + compatible = "renesas,msiof-r8a7790", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e00000 0 0x0064>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; @@ -1545,7 +1553,8 @@ }; msiof3: spi@e6c90000 { - compatible = "renesas,msiof-r8a7790"; + compatible = "renesas,msiof-r8a7790", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6c90000 0 0x0064>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 87214668d70f..9f9e48511836 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -114,7 +114,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; @@ -444,7 +444,7 @@ i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7791"; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C0>; @@ -456,7 +456,7 @@ i2c1: i2c@e6518000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7791"; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C1>; @@ -468,7 +468,7 @@ i2c2: i2c@e6530000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7791"; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C2>; @@ -480,7 +480,7 @@ i2c3: i2c@e6540000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7791"; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C3>; @@ -492,7 +492,7 @@ i2c4: i2c@e6520000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7791"; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C4>; @@ -505,7 +505,7 @@ /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7791"; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C5>; @@ -518,7 +518,8 @@ /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>; @@ -532,7 +533,8 @@ i2c7: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_IIC0>; @@ -546,7 +548,8 @@ i2c8: i2c@e6510000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_IIC1>; @@ -934,7 +937,8 @@ }; usbphy: usb-phy@e6590100 { - compatible = "renesas,usb-phy-r8a7791"; + compatible = "renesas,usb-phy-r8a7791", + "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; #address-cells = <1>; #size-cells = <0>; @@ -1517,7 +1521,8 @@ }; msiof0: spi@e6e20000 { - compatible = "renesas,msiof-r8a7791"; + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; @@ -1531,7 +1536,8 @@ }; msiof1: spi@e6e10000 { - compatible = "renesas,msiof-r8a7791"; + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e10000 0 0x0064>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; @@ -1545,7 +1551,8 @@ }; msiof2: spi@e6e00000 { - compatible = "renesas,msiof-r8a7791"; + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e00000 0 0x0064>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 6ced3c1ec377..8ecfda7a004e 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -88,7 +88,7 @@ #interrupt-cells = <3>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | @@ -498,7 +498,8 @@ /* I2C doesn't need pinmux */ i2c0: i2c@e6508000 { - compatible = "renesas,i2c-r8a7792"; + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7792_CLK_I2C0>; @@ -510,7 +511,8 @@ }; i2c1: i2c@e6518000 { - compatible = "renesas,i2c-r8a7792"; + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7792_CLK_I2C1>; @@ -522,7 +524,8 @@ }; i2c2: i2c@e6530000 { - compatible = "renesas,i2c-r8a7792"; + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7792_CLK_I2C2>; @@ -534,7 +537,8 @@ }; i2c3: i2c@e6540000 { - compatible = "renesas,i2c-r8a7792"; + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7792_CLK_I2C3>; @@ -546,7 +550,8 @@ }; i2c4: i2c@e6520000 { - compatible = "renesas,i2c-r8a7792"; + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7792_CLK_I2C4>; @@ -558,7 +563,8 @@ }; i2c5: i2c@e6528000 { - compatible = "renesas,i2c-r8a7792"; + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7792_CLK_I2C5>; @@ -585,7 +591,8 @@ }; msiof0: spi@e6e20000 { - compatible = "renesas,msiof-r8a7792"; + compatible = "renesas,msiof-r8a7792", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7792_CLK_MSIOF0>; @@ -599,7 +606,8 @@ }; msiof1: spi@e6e10000 { - compatible = "renesas,msiof-r8a7792"; + compatible = "renesas,msiof-r8a7792", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e10000 0 0x0064>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7792_CLK_MSIOF1>; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index dc311eba4444..92fff07c5e2b 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -538,6 +538,27 @@ }; }; +&i2c6 { + status = "okay"; + clock-frequency = <100000>; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; +}; + &rcar_sound { pinctrl-0 = <&sound_pins &sound_clk_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 2fb527ca0b15..48ce21c5e8db 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -105,7 +105,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; @@ -411,7 +411,7 @@ i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7793"; + compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C0>; @@ -423,7 +423,7 @@ i2c1: i2c@e6518000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7793"; + compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C1>; @@ -435,7 +435,7 @@ i2c2: i2c@e6530000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7793"; + compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C2>; @@ -447,7 +447,7 @@ i2c3: i2c@e6540000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7793"; + compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C3>; @@ -459,7 +459,7 @@ i2c4: i2c@e6520000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7793"; + compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C4>; @@ -472,7 +472,7 @@ /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7793"; + compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C5>; @@ -485,7 +485,8 @@ /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>; @@ -499,7 +500,8 @@ i2c7: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_IIC0>; @@ -513,7 +515,8 @@ i2c8: i2c@e6510000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_IIC1>; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index fb576dba748c..319c1069b7ee 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -71,7 +71,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; @@ -611,7 +611,7 @@ /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { - compatible = "renesas,i2c-r8a7794"; + compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C0>; @@ -623,7 +623,7 @@ }; i2c1: i2c@e6518000 { - compatible = "renesas,i2c-r8a7794"; + compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C1>; @@ -635,7 +635,7 @@ }; i2c2: i2c@e6530000 { - compatible = "renesas,i2c-r8a7794"; + compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C2>; @@ -647,7 +647,7 @@ }; i2c3: i2c@e6540000 { - compatible = "renesas,i2c-r8a7794"; + compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C3>; @@ -659,7 +659,7 @@ }; i2c4: i2c@e6520000 { - compatible = "renesas,i2c-r8a7794"; + compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C4>; @@ -671,7 +671,7 @@ }; i2c5: i2c@e6528000 { - compatible = "renesas,i2c-r8a7794"; + compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C5>; @@ -683,7 +683,8 @@ }; i2c6: i2c@e6500000 { - compatible = "renesas,iic-r8a7794", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7794", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_IIC0>; @@ -697,7 +698,8 @@ }; i2c7: i2c@e6510000 { - compatible = "renesas,iic-r8a7794", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7794", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_IIC1>; @@ -878,7 +880,8 @@ }; usbphy: usb-phy@e6590100 { - compatible = "renesas,usb-phy-r8a7794"; + compatible = "renesas,usb-phy-r8a7794", + "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rk1108.dtsi index d7700235e0f5..d6194bff7afe 100644 --- a/arch/arm/boot/dts/rk1108.dtsi +++ b/arch/arm/boot/dts/rk1108.dtsi @@ -215,7 +215,7 @@ #address-cells = <0>; reg = <0x32011000 0x1000>, - <0x32012000 0x1000>, + <0x32012000 0x2000>, <0x32014000 0x2000>, <0x32016000 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index 2f5f15524fba..c0953410121b 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -56,7 +56,7 @@ pinctrl-names = "default"; pinctrl-0 = <&emac_xfer>, <&emac_mdio>; phy = <&phy0>; - phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ + phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */ phy-reset-duration = <10>; /* millisecond */ status = "okay"; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index 3de958ec29c0..5726135b7f8a 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -55,7 +55,7 @@ compatible = "gpio-leds"; work { - gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; label = "kylin:red:led"; pinctrl-names = "default"; pinctrl-0 = <&led_ctl>; @@ -74,9 +74,9 @@ * - SDIO_RESET_L_WL_RST * - SDIO_RESET_L_BT_EN */ - reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ - <&gpio0 27 GPIO_ACTIVE_LOW>, /* WL_RST */ - <&gpio2 9 GPIO_ACTIVE_LOW>; /* BT_EN */ + reset-gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ + <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>, /* WL_RST */ + <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; /* BT_EN */ }; sound { @@ -121,7 +121,7 @@ pinctrl-names = "default"; pinctrl-0 = <&emac_xfer>, <&emac_mdio>; phy = <&phy0>; - phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ + phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */ phy-reset-duration = <10>; /* millisecond */ status = "okay"; @@ -148,7 +148,7 @@ compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio2>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int &global_pwroff>; rockchip,system-power-controller; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 4ed49a243e5c..ff9b90bfaefd 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -189,7 +189,7 @@ #address-cells = <0>; reg = <0x10139000 0x1000>, - <0x1013a000 0x1000>, + <0x1013a000 0x2000>, <0x1013c000 0x2000>, <0x1013e000 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index c0d8b5446ba7..e1f5198723b2 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -71,7 +71,7 @@ regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -81,7 +81,7 @@ autorepeat; power { - gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ + gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -89,7 +89,7 @@ debounce-interval = <100>; }; volume-down { - gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ + gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ linux,code = <KEY_VOLUMEDOWN>; label = "GPIO Key Vol-"; linux,input-type = <1>; @@ -111,7 +111,7 @@ reg = <0x2d>; interrupt-parent = <&gpio6>; - interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>; vcc5-supply = <&vcc_io>; vcc6-supply = <&vcc_io>; diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index 0a54c4beff8d..c6d92c25df42 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -69,7 +69,7 @@ regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -91,7 +91,7 @@ reg = <0x2d>; interrupt-parent = <&gpio6>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; vcc1-supply = <&vsys>; vcc2-supply = <&vsys>; @@ -186,7 +186,7 @@ phy0: ethernet-phy@0 { reg = <0>; interrupt-parent = <&gpio1>; - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts index 658eb7ddeaf5..7ca1cf5241e0 100644 --- a/arch/arm/boot/dts/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rk3066a-mk808.dts @@ -61,7 +61,7 @@ blue { label = "mk808:blue:power"; - gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "default-on"; }; @@ -77,7 +77,7 @@ vcc_host: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&host_drv>; pinctrl-names = "default"; regulator-always-on; @@ -91,7 +91,7 @@ vcc_otg: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&otg_drv>; pinctrl-names = "default"; regulator-always-on; @@ -104,7 +104,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; pinctrl-0 = <&sdmmc_pwr>; pinctrl-names = "default"; regulator-name = "vcc_sd"; @@ -117,7 +117,7 @@ vcc_wifi: sdio-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>; + gpio = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&wifi_pwr>; pinctrl-names = "default"; regulator-name = "vcc_wifi"; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 82465b644443..8907deaab18e 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -55,7 +55,7 @@ ir: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio6 1 GPIO_ACTIVE_LOW>; + gpios = <&gpio6 RK_PA1 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; @@ -65,7 +65,7 @@ power { wakeup-source; - gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; pinctrl-names = "default"; @@ -115,7 +115,7 @@ vcc_sata: sata-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&sata_pwr>; regulator-name = "usb_5v"; @@ -127,7 +127,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -140,7 +140,7 @@ vcc_host: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_drv>; regulator-name = "host-pwr"; @@ -153,7 +153,7 @@ vcc_otg: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_drv>; regulator-name = "vcc_otg"; @@ -201,7 +201,7 @@ compatible = "asahi-kasei,ak8975"; reg = <0x0d>; interrupt-parent = <&gpio4>; - interrupts = <17 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PC1 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&comp_int>; }; @@ -210,7 +210,7 @@ compatible = "fsl,mma8452"; reg = <0x1d>; interrupt-parent = <&gpio4>; - interrupts = <16 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PC0 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&gsensor_int>; }; @@ -223,7 +223,7 @@ tps: tps@2d { reg = <0x2d>; interrupt-parent = <&gpio6>; - interrupts = <4 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>, <&pwr_hold>; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index e498c362b9e7..f50481fd8e5c 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -687,6 +687,7 @@ }; &uart0 { + compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart"; dmas = <&dmac1_s 0>, <&dmac1_s 1>; dma-names = "tx", "rx"; pinctrl-names = "default"; @@ -694,6 +695,7 @@ }; &uart1 { + compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart"; dmas = <&dmac1_s 2>, <&dmac1_s 3>; dma-names = "tx", "rx"; pinctrl-names = "default"; @@ -701,6 +703,7 @@ }; &uart2 { + compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart"; dmas = <&dmac2 6>, <&dmac2 7>; dma-names = "tx", "rx"; pinctrl-names = "default"; @@ -708,6 +711,7 @@ }; &uart3 { + compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart"; dmas = <&dmac2 8>, <&dmac2 9>; dma-names = "tx", "rx"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts index df727bafd6dc..5b2a0b6885cd 100644 --- a/arch/arm/boot/dts/rk3188-px3-evb.dts +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts @@ -62,7 +62,7 @@ autorepeat; power { - gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -102,7 +102,7 @@ compatible = "bosch,bma250"; reg = <0x18>; interrupt-parent = <&gpio0>; - interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -114,7 +114,7 @@ compatible = "rockchip,rk818"; reg = <0x1c>; interrupt-parent = <&gpio0>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PB3 IRQ_TYPE_LEVEL_LOW>; rockchip,system-power-controller; wakeup-source; #clock-cells = <1>; @@ -247,8 +247,8 @@ compatible = "silead,gsl1680"; reg = <0x40>; interrupt-parent = <&gpio1>; - interrupts = <15 IRQ_TYPE_EDGE_FALLING>; - power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>; + power-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; touchscreen-size-x = <800>; touchscreen-size-y = <1280>; silead,max-fingers = <5>; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 5e8a235ed02d..ca0a1c4bc15c 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -58,7 +58,7 @@ autorepeat; power { - gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -72,19 +72,19 @@ green { label = "rock:green:user1"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>; default-state = "off"; }; blue { label = "rock:blue:user2"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; default-state = "off"; }; sleep { label = "rock:red:power"; - gpios = <&gpio0 15 0>; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; default-state = "off"; }; }; @@ -106,7 +106,7 @@ ir_recv: gpio-ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio0 10 1>; + gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_recv_pin>; }; @@ -114,7 +114,7 @@ vcc_otg: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "otg-vbus"; @@ -129,7 +129,7 @@ regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio3 1 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -137,7 +137,7 @@ vcc_host: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "host-pwr"; @@ -168,7 +168,7 @@ phy0: ethernet-phy@0 { reg = <0>; interrupt-parent = <&gpio3>; - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -184,7 +184,7 @@ compatible = "haoyu,hym8563"; reg = <0x51>; interrupt-parent = <&gpio0>; - interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&rtc_int>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 869e189331ec..cf91254d0a43 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -599,21 +599,25 @@ }; &uart0 { + compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart"; pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>; }; &uart1 { + compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart"; pinctrl-names = "default"; pinctrl-0 = <&uart1_xfer>; }; &uart2 { + compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart"; pinctrl-names = "default"; pinctrl-0 = <&uart2_xfer>; }; &uart3 { + compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart"; pinctrl-names = "default"; pinctrl-0 = <&uart3_xfer>; }; diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts index dcdd0cee619e..275092a950ef 100644 --- a/arch/arm/boot/dts/rk3229-evb.dts +++ b/arch/arm/boot/dts/rk3229-evb.dts @@ -77,7 +77,7 @@ phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio2 24 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; tx_delay = <0x30>; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 9d3aee5abc15..9dff8221112c 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -443,7 +443,7 @@ #address-cells = <0>; reg = <0x32011000 0x1000>, - <0x32012000 0x1000>, + <0x32012000 0x2000>, <0x32014000 0x2000>, <0x32016000 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index 041dd5d2d18c..b9418d170502 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -47,7 +47,7 @@ vcc_lcd: vcc-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_en>; regulator-name = "vcc_lcd"; @@ -57,7 +57,7 @@ vcc_wl: vcc-wl { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&wifi_pwr>; regulator-name = "vcc_wl"; @@ -96,7 +96,7 @@ reg = <0x51>; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>; diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index 44ebc6e59b3a..56c266df01c1 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -52,7 +52,7 @@ compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int &global_pwroff>; rockchip,system-power-controller; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index bf7ccfad3260..0dec94c3583b 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -84,7 +84,7 @@ 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; default-brightness-level = <128>; - enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_en>; pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>; @@ -100,7 +100,7 @@ panel: panel { compatible ="lg,lp079qx1-sp0v", "simple-panel"; backlight = <&backlight>; - enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&lcd_cs>; ports { @@ -120,7 +120,7 @@ pinctrl-0 = <&pwrbtn>; power { - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -133,7 +133,7 @@ vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host"; @@ -144,7 +144,7 @@ vcc_phy: vcc-phy-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <ð_phy_pwr>; regulator-name = "vcc_phy"; @@ -170,7 +170,7 @@ */ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -236,7 +236,7 @@ phy-supply = <&vcc_phy>; phy-mode = "rgmii"; clock_in_out = "input"; - snps,reset-gpio = <&gpio4 7 0>; + snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; assigned-clocks = <&cru SCLK_MAC>; diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts index 805c0d26770b..61d1c1028317 100644 --- a/arch/arm/boot/dts/rk3288-fennec.dts +++ b/arch/arm/boot/dts/rk3288-fennec.dts @@ -93,7 +93,7 @@ phy-mode = "rgmii"; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; status = "okay"; @@ -111,7 +111,7 @@ compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; #clock-cells = <1>; clock-output-names = "xin32k", "rk808-clkout2"; pinctrl-names = "default"; @@ -345,7 +345,7 @@ &usbphy { pinctrl-names = "default"; pinctrl-0 = <&host_drv>; - vbus_drv-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + vbus_drv-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts b/arch/arm/boot/dts/rk3288-firefly-beta.dts index 75d77e38e0d6..0195d9721660 100644 --- a/arch/arm/boot/dts/rk3288-firefly-beta.dts +++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts @@ -49,7 +49,7 @@ }; &ir { - gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>; }; &pinctrl { diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi index d242588bae0d..813496618d08 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi @@ -96,7 +96,7 @@ phy-mode = "rgmii"; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; status = "ok"; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index 751bee81128e..d0b3204a4799 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -53,7 +53,7 @@ power { wakeup-source; - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; pinctrl-names = "default"; @@ -63,14 +63,14 @@ ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>; }; leds { compatible = "gpio-leds"; power { - gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>; label = "firefly:blue:power"; pinctrl-names = "default"; pinctrl-0 = <&power_led>; @@ -78,7 +78,7 @@ }; work { - gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; label = "firefly:blue:user"; linux,default-trigger = "rc-feedback"; pinctrl-names = "default"; @@ -92,7 +92,7 @@ clock-names = "ext_clock"; pinctrl-names = "default"; pinctrl-0 = <&wifi_enable>; - reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; }; sound { @@ -112,7 +112,7 @@ vcc_host_5v: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host_5v"; @@ -133,7 +133,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -146,7 +146,7 @@ vcc_otg_5v: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "vcc_otg_5v"; @@ -159,7 +159,7 @@ dovdd_1v8: dovdd-1v8-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&dvp_pwr>; regulator-name = "dovdd_1v8"; @@ -171,7 +171,7 @@ vcc28_dvp: vcc28-dvp-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&dvp_pwr>; regulator-name = "vcc28_dvp"; @@ -183,7 +183,7 @@ af_28: af_28-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&dvp_pwr>; regulator-name = "af_28"; @@ -195,7 +195,7 @@ dvdd_1v2: af_28-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cif_pwr>; regulator-name = "dvdd_1v2"; @@ -221,7 +221,7 @@ clock-frequency = <32768>; clock-output-names = "xin32k"; interrupt-parent = <&gpio7>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&rtc_int>; }; diff --git a/arch/arm/boot/dts/rk3288-firefly.dts b/arch/arm/boot/dts/rk3288-firefly.dts index c07fe92dc69f..14271be72f30 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dts +++ b/arch/arm/boot/dts/rk3288-firefly.dts @@ -49,7 +49,7 @@ }; &ir { - gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>; }; &pinctrl { diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 44935af1fb0e..10793ac18599 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -75,7 +75,7 @@ power { wakeup-source; - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; pinctrl-names = "default"; @@ -87,7 +87,7 @@ compatible = "gpio-leds"; work { - gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; label = "firefly:blue:user"; linux,default-trigger = "rc-feedback"; pinctrl-names = "default"; @@ -95,7 +95,7 @@ }; power { - gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>; label = "firefly:green:power"; linux,default-trigger = "default-on"; pinctrl-names = "default"; @@ -114,7 +114,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -145,7 +145,7 @@ vcc_host_5v: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host_5v"; @@ -158,7 +158,7 @@ vcc_otg_5v: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "vcc_otg_5v"; @@ -175,7 +175,7 @@ vcc28_dvp: vcc28-dvp-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&dvp_pwr>; regulator-name = "vcc28_dvp"; @@ -213,7 +213,7 @@ phy-mode = "rgmii"; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; status = "ok"; @@ -260,7 +260,7 @@ clock-frequency = <32768>; clock-output-names = "xin32k"; interrupt-parent = <&gpio7>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&rtc_int>; }; diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index 441d450fd151..21326f3e8564 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -68,7 +68,7 @@ compatible = "gpio-leds"; work { - gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_LOW>; label = "miqi:green:user"; linux,default-trigger = "default-on"; pinctrl-names = "default"; @@ -87,7 +87,7 @@ vcc_host: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host"; @@ -99,7 +99,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -146,7 +146,7 @@ phy-mode = "rgmii"; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; status = "ok"; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index bc6d10054f6a..aa1f9ecff231 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -180,7 +180,7 @@ phy-supply = <&vcc_lan>; phy-mode = "rgmii"; clock_in_out = "input"; - snps,reset-gpio = <&gpio4 RK_PB0 0>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; assigned-clocks = <&cru SCLK_MAC>; @@ -205,7 +205,7 @@ compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int &global_pwroff>; rockchip,system-power-controller; @@ -390,7 +390,7 @@ compatible = "asahi-kasei,ak8975"; reg = <0x0d>; interrupt-parent = <&gpio8>; - interrupts = <1 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PA1 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&comp_int>; vdd-supply = <&vcc_io>; @@ -409,7 +409,7 @@ compatible = "fsl,mma8452"; reg = <0x1d>; interrupt-parent = <&gpio8>; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PA0 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&gsensor_int>; }; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index 04faa72dbd95..1145b62edde7 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -68,7 +68,7 @@ pinctrl-0 = <&pwrbtn>; power { - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -79,7 +79,7 @@ ir: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; @@ -87,7 +87,7 @@ vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host"; @@ -98,7 +98,7 @@ vcc_otg: vcc-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "vcc_otg"; @@ -111,7 +111,7 @@ regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -134,7 +134,7 @@ phy-supply = <&vcc_lan>; phy-mode = "rgmii"; clock_in_out = "input"; - snps,reset-gpio = <&gpio4 7 0>; + snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; assigned-clocks = <&cru SCLK_MAC>; @@ -187,7 +187,7 @@ #clock-cells = <0>; clock-output-names = "xin32k"; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index b25ba806d5ee..1c0bbc9b928b 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -51,7 +51,7 @@ compatible = "mmc-pwrseq-emmc"; pinctrl-0 = <&emmc_reset>; pinctrl-names = "default"; - reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; }; ext_gmac: external-gmac-clock { @@ -106,7 +106,7 @@ phy-supply = <&vccio_pmu>; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins &phy_rst>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 30000>; rx_delay = <0x10>; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index dd3ad2e93a6d..96a2e745bb93 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -53,13 +53,13 @@ compatible = "gpio-leds"; heartbeat { - gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PB7 GPIO_ACTIVE_LOW>; label = "rock2:green:state1"; linux,default-trigger = "heartbeat"; }; mmc { - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>; label = "rock2:blue:state2"; linux,default-trigger = "mmc0"; }; @@ -67,7 +67,7 @@ ir: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; @@ -92,13 +92,13 @@ clock-names = "ext_clock"; pinctrl-names = "default"; pinctrl-0 = <&wifi_enable>; - reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; }; vcc_usb_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; /* Always on as the rockchip usb phy doesn't have a vbus-supply @@ -110,7 +110,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -166,7 +166,7 @@ clock-frequency = <32768>; clock-output-names = "xin32k"; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>; diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi index 6d105914a4f3..280aceae25d5 100644 --- a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi @@ -17,8 +17,8 @@ rockchip,model = "VEYRON-I2S"; rockchip,i2s-controller = <&i2s>; rockchip,audio-codec = <&max98090>; - rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; - rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + rockchip,hp-det-gpios = <&gpio6 RK_PA5 GPIO_ACTIVE_HIGH>; + rockchip,mic-det-gpios = <&gpio6 RK_PB3 GPIO_ACTIVE_LOW>; rockchip,headset-codec = <&headsetcodec>; }; }; @@ -28,7 +28,7 @@ compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpio6>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA7 IRQ_TYPE_EDGE_FALLING>; clock-names = "mclk"; clocks = <&cru SCLK_I2S0_OUT>; pinctrl-names = "default"; @@ -41,7 +41,7 @@ compatible = "ti,ts3a227e"; reg = <0x3b>; interrupt-parent = <&gpio0>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ts3a227e_int_l>; ti,micbias = <7>; /* MICBIAS = 2.8V */ diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts index cf5311d2617c..ed4255294ad4 100644 --- a/arch/arm/boot/dts/rk3288-veyron-brain.dts +++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts @@ -67,7 +67,7 @@ vcc5_host2: vcc5-host2-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb2_pwr_en>; regulator-name = "vcc5_host2"; @@ -103,8 +103,8 @@ &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; - dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, - <&gpio7 15 GPIO_ACTIVE_HIGH>; + dvs-gpios = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>, + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; /delete-property/ vcc6-supply; @@ -133,7 +133,7 @@ &vcc50_hdmi { enable-active-high; - gpio = <&gpio7 2 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index ce1f87980bcb..d752a315f884 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -91,7 +91,7 @@ 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; default-brightness-level = <128>; - enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; backlight-boot-off; pinctrl-names = "default"; pinctrl-0 = <&bl_en>; @@ -102,7 +102,7 @@ gpio-charger { compatible = "gpio-charger"; charger-type = "mains"; - gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&ac_present_ap>; }; @@ -142,7 +142,7 @@ vcc5_host1: vcc5-host1-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host1_pwr_en>; regulator-name = "vcc5_host1"; @@ -154,7 +154,7 @@ vcc5v_otg: vcc5v-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usbotg_pwren_h>; regulator-name = "vcc5_host2"; @@ -190,7 +190,7 @@ pinctrl-0 = <&pwr_key_l &ap_lid_int_l>; lid { label = "Lid"; - gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; wakeup-source; linux,code = <0>; /* SW_LID */ linux,input-type = <5>; /* EV_SW */ @@ -228,7 +228,7 @@ reg = <0>; google,cros-ec-spi-pre-delay = <30>; interrupt-parent = <&gpio7>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ec_int>; spi-max-frequency = <3000000>; @@ -247,7 +247,7 @@ compatible = "elan,ekth3000"; reg = <0x15>; interrupt-parent = <&gpio7>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&trackpad_int>; vcc-supply = <&vcc33_io>; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index 3748abf562b1..d33f5763c39c 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -57,7 +57,7 @@ panel_regulator: panel-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; @@ -68,7 +68,7 @@ vcc18_lcd: vcc18-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&avdd_1v8_disp_en>; regulator-name = "vcc18_lcd"; @@ -80,7 +80,7 @@ backlight_regulator: backlight-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_pwr_en>; regulator-name = "backlight_regulator"; @@ -134,8 +134,8 @@ &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; - dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>, - <&gpio7 15 GPIO_ACTIVE_HIGH>; + dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>, + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; regulators { mic_vcc: LDO_REG2 { @@ -160,14 +160,14 @@ &vcc_5v { enable-active-high; - gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&drv_5v>; }; &vcc50_hdmi { enable-active-high; - gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts index f6b2eaaebb9a..cdea751f2a8c 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -56,7 +56,7 @@ panel_regulator: panel-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; @@ -67,7 +67,7 @@ vcc18_lcd: vcc18-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&avdd_1v8_disp_en>; regulator-name = "vcc18_lcd"; @@ -79,7 +79,7 @@ backlight_regulator: backlight-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_pwr_en>; regulator-name = "backlight_regulator"; @@ -123,14 +123,14 @@ &vcc_5v { enable-active-high; - gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&drv_5v>; }; &vcc50_hdmi { enable-active-high; - gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; @@ -197,7 +197,7 @@ trackpad@2c { compatible = "hid-over-i2c"; interrupt-parent = <&gpio7>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>; reg = <0x2c>; hid-descr-addr = <0x0020>; vcc-supply = <&vcc33_io>; diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts index f36f6f459225..f0994f0e5774 100644 --- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts @@ -182,8 +182,8 @@ &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; - dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>, - <&gpio7 15 GPIO_ACTIVE_HIGH>; + dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>, + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; /delete-property/ vcc6-supply; /delete-property/ vcc12-supply; @@ -244,7 +244,7 @@ &vcc50_hdmi { enable-active-high; - gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&power_hdmi_on>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index f72d616d1bf8..544de6027aaa 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -55,7 +55,7 @@ backlight_regulator: backlight-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_pwr_en>; regulator-name = "backlight_regulator"; @@ -66,7 +66,7 @@ panel_regulator: panel-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; @@ -77,7 +77,7 @@ vcc18_lcd: vcc18-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&avdd_1v8_disp_en>; regulator-name = "vcc18_lcd"; @@ -134,14 +134,14 @@ volum_down { label = "Volum_down"; - gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <100>; }; volum_up { label = "Volum_up"; - gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; debounce-interval = <100>; }; @@ -165,10 +165,10 @@ compatible = "elan,ekth3500"; reg = <0x10>; interrupt-parent = <&gpio2>; - interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PB6 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&touch_int &touch_rst>; - reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>; vcc33-supply = <&vcc33_touch>; vccio-supply = <&vcc33_touch>; }; @@ -211,14 +211,14 @@ &vcc_5v { enable-active-high; - gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&drv_5v>; }; &vcc50_hdmi { enable-active-high; - gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index d44351ec2333..995cff42fa43 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -76,7 +76,7 @@ pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; power { - gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; }; }; @@ -126,7 +126,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio &sdmmc_wp_gpio &sdmmc_bus4>; - wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>; }; &tsadc { diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi index fec076eb7aef..aef07101e9ab 100644 --- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi @@ -115,7 +115,7 @@ cap-mmc-highspeed; cap-sd-highspeed; card-detect-delay = <200>; - cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>; rockchip,default-sample-phase = <90>; num-slots = <1>; sd-uhs-sdr12; diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index a0d033f6fe52..cc0b78cefe34 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -57,7 +57,7 @@ panel_regulator: panel-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; @@ -68,7 +68,7 @@ vcc18_lcd: vcc18-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&avdd_1v8_disp_en>; regulator-name = "vcc18_lcd"; @@ -80,7 +80,7 @@ backlight_regulator: backlight-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_pwr_en>; regulator-name = "backlight_regulator"; @@ -126,14 +126,14 @@ &vcc_5v { enable-active-high; - gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&drv_5v>; }; &vcc50_hdmi { enable-active-high; - gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 2251d28e9d2a..5d1eb0a25827 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -61,7 +61,7 @@ pinctrl-0 = <&pwr_key_l>; power { label = "Power"; - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; debounce-interval = <100>; wakeup-source; @@ -70,7 +70,7 @@ gpio-restart { compatible = "gpio-restart"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&ap_warm_reset_h>; priority = <200>; @@ -80,7 +80,7 @@ compatible = "mmc-pwrseq-emmc"; pinctrl-0 = <&emmc_reset>; pinctrl-names = "default"; - reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>; }; sdio_pwrseq: sdio-pwrseq { @@ -96,7 +96,7 @@ * - SDIO_RESET_L_WL_REG_ON * - PDN (power down when low) */ - reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; }; vcc_5v: vcc-5v { @@ -178,7 +178,7 @@ reg = <0x1b>; clock-output-names = "xin32k", "wifibt_32kin"; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; rockchip,system-power-controller; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 4fad13368a7b..df8a0dbe9d91 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -762,6 +762,15 @@ <&cru SCLK_ISP_JPE>, <&cru SCLK_ISP>, <&cru SCLK_RGA>; + pm_qos = <&qos_vio0_iep>, + <&qos_vio1_vop>, + <&qos_vio1_isp_w0>, + <&qos_vio1_isp_w1>, + <&qos_vio0_vop>, + <&qos_vio0_vip>, + <&qos_vio2_rga_r>, + <&qos_vio2_rga_w>, + <&qos_vio1_isp_r>; }; /* @@ -773,6 +782,8 @@ clocks = <&cru ACLK_HEVC>, <&cru SCLK_HEVC_CABAC>, <&cru SCLK_HEVC_CORE>; + pm_qos = <&qos_hevc_r>, + <&qos_hevc_w>; }; /* @@ -784,6 +795,7 @@ reg = <RK3288_PD_VIDEO>; clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; + pm_qos = <&qos_video>; }; /* @@ -793,6 +805,8 @@ pd_gpu@RK3288_PD_GPU { reg = <RK3288_PD_GPU>; clocks = <&cru ACLK_GPU>; + pm_qos = <&qos_gpu_r>, + <&qos_gpu_w>; }; }; @@ -1103,6 +1117,76 @@ }; }; + qos_gpu_r: qos@ffaa0000 { + compatible = "syscon"; + reg = <0xffaa0000 0x20>; + }; + + qos_gpu_w: qos@ffaa0080 { + compatible = "syscon"; + reg = <0xffaa0080 0x20>; + }; + + qos_vio1_vop: qos@ffad0000 { + compatible = "syscon"; + reg = <0xffad0000 0x20>; + }; + + qos_vio1_isp_w0: qos@ffad0100 { + compatible = "syscon"; + reg = <0xffad0100 0x20>; + }; + + qos_vio1_isp_w1: qos@ffad0180 { + compatible = "syscon"; + reg = <0xffad0180 0x20>; + }; + + qos_vio0_vop: qos@ffad0400 { + compatible = "syscon"; + reg = <0xffad0400 0x20>; + }; + + qos_vio0_vip: qos@ffad0480 { + compatible = "syscon"; + reg = <0xffad0480 0x20>; + }; + + qos_vio0_iep: qos@ffad0500 { + compatible = "syscon"; + reg = <0xffad0500 0x20>; + }; + + qos_vio2_rga_r: qos@ffad0800 { + compatible = "syscon"; + reg = <0xffad0800 0x20>; + }; + + qos_vio2_rga_w: qos@ffad0880 { + compatible = "syscon"; + reg = <0xffad0880 0x20>; + }; + + qos_vio1_isp_r: qos@ffad0900 { + compatible = "syscon"; + reg = <0xffad0900 0x20>; + }; + + qos_video: qos@ffae0000 { + compatible = "syscon"; + reg = <0xffae0000 0x20>; + }; + + qos_hevc_r: qos@ffaf0000 { + compatible = "syscon"; + reg = <0xffaf0000 0x20>; + }; + + qos_hevc_w: qos@ffaf0080 { + compatible = "syscon"; + reg = <0xffaf0080 0x20>; + }; + gic: interrupt-controller@ffc01000 { compatible = "arm,gic-400"; interrupt-controller; @@ -1110,7 +1194,7 @@ #address-cells = <0>; reg = <0xffc01000 0x1000>, - <0xffc02000 0x1000>, + <0xffc02000 0x2000>, <0xffc04000 0x2000>, <0xffc06000 0x2000>; interrupts = <GIC_PPI 9 0xf04>; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index ceb9783ff7e1..22332be72140 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -395,6 +395,16 @@ clock-names = "dma_clk"; }; + /* Place dma1 here despite its address */ + dma1: dma-controller@f0004000 { + compatible = "atmel,sama5d4-dma"; + reg = <0xf0004000 0x1000>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + clocks = <&dma1_clk>; + clock-names = "dma_clk"; + }; + pmc: pmc@f0014000 { compatible = "atmel,sama5d2-pmc", "syscon"; reg = <0xf0014000 0x160>; @@ -931,6 +941,22 @@ status = "disabled"; }; + ssc0: ssc@f8004000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf8004000 0x4000>; + interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(21))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(22))>; + dma-names = "tx", "rx"; + clocks = <&ssc0_clk>; + clock-names = "pclk"; + status = "disabled"; + }; + macb0: ethernet@f8008000 { compatible = "atmel,sama5d2-gem"; reg = <0xf8008000 0x1000>; @@ -1141,10 +1167,10 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xfc008000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 + dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(41))>, - <&dma0 + <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(42))>; dma-names = "tx", "rx"; diff --git a/arch/arm/boot/dts/sama5d36ek_cmp.dts b/arch/arm/boot/dts/sama5d36ek_cmp.dts new file mode 100644 index 000000000000..b632143844e5 --- /dev/null +++ b/arch/arm/boot/dts/sama5d36ek_cmp.dts @@ -0,0 +1,87 @@ +/* + * sama5d36ek_cmp.dts - Device Tree file for SAMA5D36-EK CMP board + * + * Copyright (C) 2016 Atmel, + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include "sama5d36.dtsi" +#include "sama5d3xmb_cmp.dtsi" + +/ { + model = "Atmel SAMA5D36EK-CMP"; + compatible = "atmel,sama5d36ek-cmp", "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + spi0: spi@f0004000 { + status = "okay"; + }; + + ssc0: ssc@f0008000 { + status = "okay"; + }; + + can0: can@f000c000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb0: ethernet@f0028000 { + status = "okay"; + }; + + macb1: ethernet@f802c000 { + status = "okay"; + }; + }; + }; + + sound { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index 2511d748867b..186377d41c91 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -55,7 +55,7 @@ uart0: serial@f0024000 { compatible = "atmel,at91sam9260-usart"; - reg = <0xf0024000 0x200>; + reg = <0xf0024000 0x100>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; @@ -66,7 +66,7 @@ uart1: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; - reg = <0xf8028000 0x200>; + reg = <0xf8028000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi new file mode 100644 index 000000000000..dc7572bc7ff0 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi @@ -0,0 +1,201 @@ +/* + * sama5d3xcm_cmp.dtsi - Device Tree Include file for SAMA5D36 CMP CPU Module + * + * Copyright (C) 2016 Atmel, + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + compatible = "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x20000000 0x20000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + spi0: spi@f0004000 { + cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; + }; + + macb0: ethernet@f0028000 { + phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; + + ethernet-phy@7 { + reg = <0x7>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; + }; + + i2c1: i2c@f0018000 { + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + status = "disabled"; + + regulators { + vcc_1v8_reg: DCDC_REG1 { + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_1v2_reg: DCDC_REG2 { + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + vcc_3v3_reg: DCDC_REG3 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddana_reg: LDO_REG1 { + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddfuse_reg: LDO_REG2 { + regulator-name = "FUSE_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + }; + }; + }; + }; + + nand0: nand@60000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + d2 { + label = "d2"; + gpios = <&pioE 25 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi new file mode 100644 index 000000000000..252e0d35f846 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi @@ -0,0 +1,301 @@ +/* + * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board + * + * Copyright (C) 2016 Atmel, + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "sama5d3xcm_cmp.dtsi" + +/ { + compatible = "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + mmc0: mmc@f0000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>; + }; + }; + + spi0: spi@f0004000 { + dmas = <0>, <0>; /* Do not use DMA for spi0 */ + + m25p80@0 { + compatible = "atmel,at25df321a"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; + + ssc0: ssc@f0008000 { + atmel,clk-from-rk-pin; + }; + + /* + * i2c0 conflicts with ISI: + * disable it to allow the use of ISI + * can not enable audio when i2c0 disabled + */ + i2c0: i2c@f0014000 { + wm8904: wm8904@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&pck0>; + clock-names = "mclk"; + }; + }; + + i2c1: i2c@f0018000 { + ov2640: camera@0x30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; + /* use pck1 for the master clock of ov2640 */ + clocks = <&pck1>; + clock-names = "xvclk"; + assigned-clocks = <&pck1>; + assigned-clock-rates = <25000000>; + + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + bus-width = <8>; + }; + }; + }; + }; + + usart1: serial@f0020000 { + dmas = <0>, <0>; /* Do not use DMA for usart1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; + status = "okay"; + }; + + isi: isi@f0034000 { + port { + isi_0: endpoint { + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + vsync-active = <1>; + hsync-active = <1>; + }; + }; + }; + + mmc1: mmc@f8000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>; + }; + }; + + adc0: adc@f8018000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + >; + pinctrl-1 = < + &pinctrl_adc0_adtrg_sleep + &pinctrl_adc0_ad0_sleep + &pinctrl_adc0_ad1_sleep + &pinctrl_adc0_ad2_sleep + &pinctrl_adc0_ad3_sleep + &pinctrl_adc0_ad4_sleep + >; + status = "okay"; + }; + + macb1: ethernet@f802c000 { + phy-mode = "rmii"; + + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@1 { + /*interrupt-parent = <&pioE>;*/ + /*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/ + reg = <1>; + }; + }; + + pinctrl@fffff200 { + adc0 { + pinctrl_adc0_adtrg_sleep: adc0_adtrg_1 { + atmel,pins = + <AT91_PIOD 19 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + pinctrl_adc0_ad0_sleep: adc0_ad0_1 { + atmel,pins = + <AT91_PIOD 20 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + pinctrl_adc0_ad1_sleep: adc0_ad1_1 { + atmel,pins = + <AT91_PIOD 21 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + pinctrl_adc0_ad2_sleep: adc0_ad2_1 { + atmel,pins = + <AT91_PIOD 22 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + pinctrl_adc0_ad3_sleep: adc0_ad3_1 { + atmel,pins = + <AT91_PIOD 23 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + pinctrl_adc0_ad4_sleep: adc0_ad4_1 { + atmel,pins = + <AT91_PIOD 24 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + }; + + board { + pinctrl_gpio_keys: gpio_keys { + atmel,pins = + <AT91_PIOE 27 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = + <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_mmc1_cd: mmc1_cd { + atmel,pins = + <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { + atmel,pins = + <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 { + atmel,pins = + <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_sensor_reset: sensor_reset-0 { + atmel,pins = + <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_sensor_power: sensor_power-0 { + atmel,pins = + <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + }; + }; + + dbgu: serial@ffffee00 { + dmas = <0>, <0>; /* Do not use DMA for dbgu */ + status = "okay"; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + + usb0: gadget@00500000 { + atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + }; + + sound { + compatible = "atmel,asoc-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_audio_mck>; + + atmel,model = "wm8904 @ SAMA5D3EK"; + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Mic", "MICBIAS", + "IN1L", "Mic"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; + + status = "disabled"; + }; + + /* Conflict with LCD pins */ + gpio_keys { + compatible = "gpio-keys"; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + pb_user1 { + label = "pb_user1"; + gpios = <&pioE 27 GPIO_ACTIVE_HIGH>; + linux,code = <0x100>; + wakeup-source; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 4f60c1b7b137..d3889c9d25a9 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -854,10 +854,10 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8004000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>; - dmas = <&dma1 + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(22))>, - <&dma1 + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(23))>; dma-names = "tx", "rx"; @@ -938,10 +938,10 @@ compatible = "atmel,sama5d4-i2c"; reg = <0xf8018000 0x4000>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>; - dmas = <&dma1 + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(4))>, - <&dma1 + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(5))>; dma-names = "tx", "rx"; @@ -1055,10 +1055,10 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xfc004000 0x100>; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; - dmas = <&dma1 + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(24))>, - <&dma1 + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>; dma-names = "tx", "rx"; @@ -1167,10 +1167,10 @@ compatible = "atmel,at91rm9200-spi"; reg = <0xfc01c000 0x100>; interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>; - dmas = <&dma1 + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(14))>, - <&dma1 + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(15))>; dma-names = "tx", "rx"; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index e1267590b575..6b01ab354e88 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -263,7 +263,7 @@ }; mmcif: mmc@e6bd0000 { - compatible = "renesas,sh-mmcif"; + compatible = "renesas,mmcif-sh73a0", "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index da689659131f..2c43c4d85dee 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -93,6 +93,14 @@ }; }; + base_fpga_region { + compatible = "fpga-region"; + fpga-mgr = <&fpgamgr0>; + + #address-cells = <0x1>; + #size-cells = <0x1>; + }; + can0: can@ffc00000 { compatible = "bosch,d_can"; reg = <0xffc00000 0x1000>; @@ -513,10 +521,24 @@ }; }; + fpga_bridge0: fpga_bridge@ff400000 { + compatible = "altr,socfpga-lwhps2fpga-bridge"; + reg = <0xff400000 0x100000>; + resets = <&rst LWHPS2FPGA_RESET>; + clocks = <&l4_main_clk>; + }; + + fpga_bridge1: fpga_bridge@ff500000 { + compatible = "altr,socfpga-hps2fpga-bridge"; + reg = <0xff500000 0x10000>; + resets = <&rst HPS2FPGA_RESET>; + clocks = <&l4_main_clk>; + }; + fpgamgr0: fpgamgr@ff706000 { compatible = "altr,socfpga-fpga-mgr"; reg = <0xff706000 0x1000 - 0xffb90000 0x1000>; + 0xffb90000 0x4>; interrupts = <0 175 4>; }; @@ -694,6 +716,11 @@ arm,prefetch-offset = <7>; }; + l3regs@0xff800000 { + compatible = "altr,l3regs", "syscon"; + reg = <0xff800000 0x1000>; + }; + mmc: dwmmc0@ff704000 { compatible = "altr,socfpga-dw-mshc"; reg = <0xff704000 0x1000>; @@ -751,7 +778,7 @@ }; sdr: sdr@ffc25000 { - compatible = "syscon"; + compatible = "altr,sdr-ctl", "syscon"; reg = <0xffc25000 0x1000>; }; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 551c636a4f01..6b0b7463f36f 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -83,6 +83,14 @@ }; }; + base_fpga_region { + #address-cells = <0x1>; + #size-cells = <0x1>; + + compatible = "fpga-region"; + fpga-mgr = <&fpga_mgr>; + }; + clkmgr@ffd04000 { compatible = "altr,clk-mgr"; reg = <0xffd04000 0x1000>; @@ -400,6 +408,12 @@ }; }; + socfpga_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <0 0 0 0 16 0 0>; + }; + gmac0: ethernet@ff800000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; altr,sysmgr-syscon = <&sysmgr 0x44 0>; @@ -416,6 +430,7 @@ clock-names = "stmmaceth"; resets = <&rst EMAC0_RESET>; reset-names = "stmmaceth"; + snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; @@ -435,6 +450,7 @@ clock-names = "stmmaceth"; resets = <&rst EMAC1_RESET>; reset-names = "stmmaceth"; + snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; @@ -452,6 +468,7 @@ rx-fifo-depth = <16384>; clocks = <&l4_mp_clk>; clock-names = "stmmaceth"; + snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; @@ -512,6 +529,15 @@ }; }; + fpga_mgr: fpga-mgr@ffd03000 { + compatible = "altr,socfpga-a10-fpga-mgr"; + reg = <0xffd03000 0x100 + 0xffcfe400 0x20>; + clocks = <&l4_mp_clk>; + resets = <&rst FPGAMGR_RESET>; + reset-names = "fpgamgr"; + }; + i2c0: i2c@ffc02200 { #address-cells = <1>; #size-cells = <0>; @@ -578,7 +604,7 @@ }; sdr: sdr@ffc25000 { - compatible = "syscon"; + compatible = "altr,sdr-ctl", "syscon"; reg = <0xffcfb100 0x80>; }; @@ -605,6 +631,19 @@ status = "disabled"; }; + nand: nand@ffb90000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "denali,denali-nand-dt", "altr,socfpga-denali-nand"; + reg = <0xffb90000 0x72000>, + <0xffb80000 0x10000>; + reg-names = "nand_data", "denali_reg"; + interrupts = <0 99 4>; + dma-mask = <0xffffffff>; + clocks = <&nand_clk>; + status = "disabled"; + }; + ocram: sram@ffe00000 { compatible = "mmio-sram"; reg = <0xffe00000 0x40000>; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi index eb00ae37f316..c57e6cea0d83 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -145,6 +145,11 @@ compatible = "dallas,ds1339"; reg = <0x68>; }; + + ltc@5c { + compatible = "ltc2977"; + reg = <0x5c>; + }; }; &uart1 { @@ -154,3 +159,7 @@ &usb0 { status = "okay"; }; + +&watchdog1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts new file mode 100644 index 000000000000..d14f9ccb6e10 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2015 Altera Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/dts-v1/; +#include "socfpga_arria10_socdk.dtsi" + +&nand { + status = "okay"; + + partition@nand-boot { + label = "Boot and fpga data"; + reg = <0x0 0x1C00000>; + }; + partition@nand-rootfs { + label = "Root Filesystem - JFFS2"; + reg = <0x1C00000 0x6400000>; + }; +}; diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi index 1907cc600452..8c037297296c 100644 --- a/arch/arm/boot/dts/socfpga_arria5.dtsi +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi @@ -42,3 +42,7 @@ }; }; }; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index f739ead074a2..8672edf9ba4e 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -39,6 +39,29 @@ ethernet0 = &gmac1; }; + leds { + compatible = "gpio-leds"; + hps0 { + label = "hps_led0"; + gpios = <&porta 0 1>; + }; + + hps1 { + label = "hps_led1"; + gpios = <&portb 11 1>; + }; + + hps2 { + label = "hps_led2"; + gpios = <&porta 17 1>; + }; + + hps3 { + label = "hps_led3"; + gpios = <&porta 18 1>; + }; + }; + regulator_3_3v: 3-3-v-regulator { compatible = "regulator-fixed"; regulator-name = "3.3V"; @@ -61,8 +84,28 @@ rxc-skew-ps = <2000>; }; +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + &i2c0 { status = "okay"; + clock-frequency = <100000>; + + /* + * adjust the falling times to decrease the i2c frequency to 50Khz + * because the LCD module does not work at the standard 100Khz + */ + i2c-sda-falling-time-ns = <5000>; + i2c-scl-falling-time-ns = <5000>; eeprom@51 { compatible = "atmel,24c32"; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index 6306d008f01b..7ea32c81e720 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -39,6 +39,29 @@ ethernet0 = &gmac1; }; + leds { + compatible = "gpio-leds"; + hps0 { + label = "hps_led0"; + gpios = <&portb 15 1>; + }; + + hps1 { + label = "hps_led1"; + gpios = <&portb 14 1>; + }; + + hps2 { + label = "hps_led2"; + gpios = <&portb 13 1>; + }; + + hps3 { + label = "hps_led3"; + gpios = <&portb 12 1>; + }; + }; + regulator_3_3v: 3-3-v-regulator { compatible = "regulator-fixed"; regulator-name = "3.3V"; @@ -47,6 +70,10 @@ }; }; +&can0 { + status = "okay"; +}; + &gmac1 { status = "okay"; phy-mode = "rgmii"; @@ -61,12 +88,28 @@ rxc-skew-ps = <2000>; }; +&gpio0 { + status = "okay"; +}; + &gpio1 { status = "okay"; }; +&gpio2 { + status = "okay"; +}; + &i2c0 { status = "okay"; + clock-frequency = <100000>; + + /* + * adjust the falling times to decrease the i2c frequency to 50Khz + * because the LCD module does not work at the standard 100Khz + */ + i2c-sda-falling-time-ns = <5000>; + i2c-scl-falling-time-ns = <5000>; eeprom@51 { compatible = "atmel,24c32"; @@ -120,6 +163,16 @@ }; }; +&spi0 { + status = "okay"; + + spidev@0 { + compatible = "rohm,dh2228fv"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + &usb1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index d309314f3a36..82d8c4771293 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -669,6 +669,8 @@ vddulpivio18-supply = <&ab8500_ldo_intcore_reg>; v-ape-supply = <&db8500_vape_reg>; musb_1v8-supply = <&db8500_vsmps2_reg>; + clocks = <&prcmu_clk PRCMU_SYSCLK>; + clock-names = "sysclk"; }; ab8500-ponkey { diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 48dc38482633..f37f9e10713c 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -19,12 +19,6 @@ }; soc { - usb_per5@a03e0000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&musb_default_mode>; - pinctrl-1 = <&musb_sleep_mode>; - }; - uart@80120000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart0_default_mode>; @@ -111,6 +105,7 @@ pinctrl-1 = <&i2c3_sleep_mode>; }; + /* ST6G3244ME level translator for 1.8/2.9 V */ vmmci: regulator-gpio { compatible = "regulator-gpio"; @@ -120,7 +115,6 @@ regulator-type = "voltage"; startup-delay-us = <100>; - enable-active-high; states = <1800000 0x1 2900000 0x0>; @@ -197,6 +191,8 @@ stericsson,cpu-dai = <&msp1 &msp3>; stericsson,audio-codec = <&codec>; + clocks = <&prcmu_clk PRCMU_SYSCLK>; + clock-names = "sysclk"; }; msp0: msp@80123000 { @@ -225,6 +221,12 @@ ab8500-gpio { }; + ab8500_usb { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&musb_default_mode>; + pinctrl-1 = <&musb_sleep_mode>; + }; + ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index ece222d51717..5882a2606ac3 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -74,6 +74,7 @@ vmmci: regulator-gpio { gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>; enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>; + enable-active-high; }; pinctrl { diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index 7187676836be..bf259bbd1d0a 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -146,6 +146,7 @@ vmmci: regulator-gpio { gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + enable-active-high; }; pinctrl { diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 386eee6de232..dd5514def604 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -159,17 +159,13 @@ "", "", "", "", "", "", "", ""; }; - usb_per5@a03e0000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&musb_default_mode>; - pinctrl-1 = <&musb_sleep_mode>; - }; - sound { compatible = "stericsson,snd-soc-mop500"; stericsson,cpu-dai = <&msp1 &msp3>; stericsson,audio-codec = <&codec>; + clocks = <&prcmu_clk PRCMU_SYSCLK>; + clock-names = "sysclk"; }; msp0: msp@80123000 { @@ -216,11 +212,15 @@ }; }; + /* ST6G3244ME level translator for 1.8/2.9 V */ vmmci: regulator-gpio { compatible = "regulator-gpio"; + /* GPIO228 SD_SEL */ gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + /* GPIO217 MMC_EN */ enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>; + enable-active-high; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2900000>; @@ -228,7 +228,6 @@ regulator-type = "voltage"; startup-delay-us = <100>; - enable-active-high; states = <1800000 0x1 2900000 0x0>; @@ -448,6 +447,12 @@ "PM_GPIO42"; /* AB8500 GPIO42 */ }; + ab8500_usb { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&musb_default_mode>; + pinctrl-1 = <&musb_sleep_mode>; + }; + ext_regulators: ab8500-ext-regulators { ab8500_ext1_reg: ab8500_ext1 { regulator-name = "ab8500-ext-supply1"; @@ -546,6 +551,7 @@ sdi0_default_mode: sdi0_default { snowball_mux { function = "mc0"; + /* Add the DAT31 pin even if it is not really used */ groups = "mc0dat31dir_a_1"; }; snowball_cfg1 { diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index c8b2944e304a..d753ac36788f 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -20,30 +20,15 @@ #size-cells = <1>; ranges; - gp0_reserved: rproc@40000000 { + gp0_reserved: rproc@45000000 { compatible = "shared-dma-pool"; - reg = <0x40000000 0x01000000>; + reg = <0x45000000 0x00400000>; no-map; - status = "disabled"; - }; - - gp1_reserved: rproc@41000000 { - compatible = "shared-dma-pool"; - reg = <0x41000000 0x01000000>; - no-map; - status = "disabled"; - }; - - audio_reserved: rproc@42000000 { - compatible = "shared-dma-pool"; - reg = <0x42000000 0x01000000>; - no-map; - status = "disabled"; }; - dmu_reserved: rproc@43000000 { + delta_reserved: rproc@44000000 { compatible = "shared-dma-pool"; - reg = <0x43000000 0x01000000>; + reg = <0x44000000 0x01000000>; no-map; }; }; @@ -222,9 +207,8 @@ compatible = "st,asc"; reg = <0x9830000 0x2c>; interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_serial0>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + /* Pinctrl moved out to a per-board configuration */ status = "disabled"; }; @@ -680,6 +664,7 @@ phy-names = "usb2-phy", "usb3-phy"; phys = <&usb2_picophy0>, <&phy_port2 PHY_TYPE_USB3>; + snps,dis_u3_susphy_quirk; }; }; @@ -703,6 +688,7 @@ compatible = "st,sti-pwm"; #pwm-cells = <2>; reg = <0x9510000 0x68>; + interrupts = <GIC_SPI 131 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1_chan0_default &pinctrl_pwm1_chan1_default @@ -823,37 +809,22 @@ clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>; clock-frequency = <600000000>; st,syscfg = <&syscfg_core 0x22c>; + #mbox-cells = <1>; + mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx"; + mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>; }; - - st231_gp1: remote-processor { - compatible = "st,st231-rproc"; - memory-region = <&gp1_reserved>; - resets = <&softreset STIH407_ST231_GP1_SOFTRESET>; - reset-names = "sw_reset"; - clocks = <&clk_s_c0_flexgen CLK_ST231_GP_1>; - clock-frequency = <600000000>; - st,syscfg = <&syscfg_core 0x220>; - }; - - st231_audio: remote-processor { - compatible = "st,st231-rproc"; - memory-region = <&audio_reserved>; - resets = <&softreset STIH407_ST231_AUD_SOFTRESET>; - reset-names = "sw_reset"; - clocks = <&clk_s_c0_flexgen CLK_ST231_AUD_0>; - clock-frequency = <600000000>; - st,syscfg = <&syscfg_core 0x228>; - }; - - st231_dmu: remote-processor { + st231_delta: remote-processor { compatible = "st,st231-rproc"; - memory-region = <&dmu_reserved>; + memory-region = <&delta_reserved>; resets = <&softreset STIH407_ST231_DMU_SOFTRESET>; reset-names = "sw_reset"; clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>; clock-frequency = <600000000>; st,syscfg = <&syscfg_core 0x224>; + #mbox-cells = <1>; + mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx"; + mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>; }; /* fdma audio */ @@ -889,6 +860,8 @@ interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; dma-channels = <16>; #dma-cells = <3>; + + status = "disabled"; }; /* fdma free running */ @@ -906,6 +879,8 @@ <&clk_s_c0_flexgen CLK_EXT2F_A9>, <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, <&clk_s_c0_flexgen CLK_EXT2F_A9>; + + status = "disabled"; }; sti_sasg_codec: sti-sasg-codec { @@ -1002,5 +977,15 @@ status = "disabled"; }; + + delta0 { + compatible = "st,st-delta"; + clock-names = "delta", + "delta-st231", + "delta-flash-promip"; + clocks = <&clk_s_c0_flexgen CLK_VID_DMU>, + <&clk_s_c0_flexgen CLK_ST231_DMU>, + <&clk_s_c0_flexgen CLK_FLASH_PROMIP>; + }; }; }; diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index daab16b5ae64..bd1a82e8fffe 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -465,8 +465,16 @@ serial0 { pinctrl_serial0: serial0-0 { st,pins { - tx = <&pio17 0 ALT1 OUT>; - rx = <&pio17 1 ALT1 IN>; + tx = <&pio17 0 ALT1 OUT>; + rx = <&pio17 1 ALT1 IN>; + }; + }; + pinctrl_serial0_hw_flowctrl: serial0-0_hw_flowctrl { + st,pins { + tx = <&pio17 0 ALT1 OUT>; + rx = <&pio17 1 ALT1 IN>; + cts = <&pio17 2 ALT1 IN>; + rts = <&pio17 3 ALT1 OUT>; }; }; }; diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts index 118ac284fc4b..83313b51915d 100644 --- a/arch/arm/boot/dts/stih410-b2120.dts +++ b/arch/arm/boot/dts/stih410-b2120.dts @@ -60,5 +60,11 @@ ehci1: usb@9a83e00 { status = "okay"; }; + + sti-display-subsystem { + sti-hda@8d02000 { + status = "okay"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts index 06b0696cb6b8..93c14d183e29 100644 --- a/arch/arm/boot/dts/stih410-b2260.dts +++ b/arch/arm/boot/dts/stih410-b2260.dts @@ -62,6 +62,11 @@ /* Low speed expansion connector */ uart0: serial@9830000 { label = "LS-UART0"; + pinctrl-names = "default", "no-hw-flowctrl"; + pinctrl-0 = <&pinctrl_serial0_hw_flowctrl>; + pinctrl-1 = <&pinctrl_serial0>; + rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index 281a12424cf6..3c9672c5b09f 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -131,7 +131,7 @@ <&clk_s_d2_quadfs 0>; assigned-clock-rates = <297000000>, - <108000000>, + <297000000>, <0>, <400000000>, <400000000>; @@ -221,6 +221,7 @@ sti-hda@8d02000 { compatible = "st,stih407-hda"; + status = "disabled"; reg = <0x8d02000 0x400>, <0x92b0120 0x4>; reg-names = "hda-reg", "video-dacs-ctrl"; clock-names = "pix", @@ -232,6 +233,17 @@ <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>; }; + + sti-hqvdp@9c000000 { + compatible = "st,stih407-hqvdp"; + reg = <0x9C00000 0x100000>; + clock-names = "hqvdp", "pix_main"; + clocks = <&clk_s_c0_flexgen CLK_MAIN_DISP>, + <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>; + reset-names = "hqvdp"; + resets = <&softreset STIH407_HDQVDP_SOFTRESET>; + st,vtg = <&vtg_main>; + }; }; bdisp0:bdisp@9f10000 { @@ -259,5 +271,15 @@ clocks = <&clk_sysin>; interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>; }; + + delta0 { + compatible = "st,st-delta"; + clock-names = "delta", + "delta-st231", + "delta-flash-promip"; + clocks = <&clk_s_c0_flexgen CLK_VID_DMU>, + <&clk_s_c0_flexgen CLK_ST231_DMU>, + <&clk_s_c0_flexgen CLK_FLASH_PROMIP>; + }; }; }; diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 5436e880e28f..3c99466989b1 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -70,6 +70,20 @@ dma-ranges = <0xc0000000 0x0 0x10000000>; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_vref: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vref"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + leds { compatible = "gpio-leds"; green { @@ -107,15 +121,32 @@ usbotg_hs_phy: usbphy { #phy-cells = <0>; compatible = "usb-nop-xceiv"; - clocks = <&rcc 0 30>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>; clock-names = "main_clk"; }; }; +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc3_in8_pin>; + vref-supply = <®_vref>; + status = "okay"; + adc3: adc@200 { + st,adc-channels = <8>; + status = "okay"; + }; +}; + &clk_hse { clock-frequency = <25000000>; }; +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &mac { status = "okay"; pinctrl-0 = <ðernet_mii>; @@ -132,6 +163,10 @@ }; }; +&rtc { + status = "okay"; +}; + &usart1 { pinctrl-0 = <&usart1_pins_a>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index 7d0415e80668..9222b9f37bc0 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -94,6 +94,12 @@ clock-frequency = <8000000>; }; +&rtc { + assigned-clocks = <&rcc 1 CLK_RTC>; + assigned-clock-parents = <&rcc 1 CLK_LSI>; + status = "okay"; +}; + &usart1 { pinctrl-0 = <&usart1_pins_a>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index e4dae0eda3cd..ee0da970e8ad 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -48,6 +48,8 @@ #include "skeleton.dtsi" #include "armv7-m.dtsi" #include <dt-bindings/pinctrl/stm32f429-pinfunc.h> +#include <dt-bindings/clock/stm32fx-clock.h> +#include <dt-bindings/mfd/stm32f4-rcc.h> / { clocks { @@ -68,6 +70,12 @@ compatible = "fixed-clock"; clock-frequency = <32000>; }; + + clk_i2s_ckin: i2s-ckin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; }; soc { @@ -75,46 +83,227 @@ compatible = "st,stm32-timer"; reg = <0x40000000 0x400>; interrupts = <28>; - clocks = <&rcc 0 128>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>; + status = "disabled"; + }; + + timers2: timers@40000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000000 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>; + clock-names = "int"; status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@1 { + compatible = "st,stm32-timer-trigger"; + reg = <1>; + status = "disabled"; + }; }; timer3: timer@40000400 { compatible = "st,stm32-timer"; reg = <0x40000400 0x400>; interrupts = <29>; - clocks = <&rcc 0 129>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>; + status = "disabled"; + }; + + timers3: timers@40000400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000400 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>; + clock-names = "int"; status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@2 { + compatible = "st,stm32-timer-trigger"; + reg = <2>; + status = "disabled"; + }; }; timer4: timer@40000800 { compatible = "st,stm32-timer"; reg = <0x40000800 0x400>; interrupts = <30>; - clocks = <&rcc 0 130>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>; + status = "disabled"; + }; + + timers4: timers@40000800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000800 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>; + clock-names = "int"; status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@3 { + compatible = "st,stm32-timer-trigger"; + reg = <3>; + status = "disabled"; + }; }; timer5: timer@40000c00 { compatible = "st,stm32-timer"; reg = <0x40000c00 0x400>; interrupts = <50>; - clocks = <&rcc 0 131>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>; + }; + + timers5: timers@40000c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000C00 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@4 { + compatible = "st,stm32-timer-trigger"; + reg = <4>; + status = "disabled"; + }; }; timer6: timer@40001000 { compatible = "st,stm32-timer"; reg = <0x40001000 0x400>; interrupts = <54>; - clocks = <&rcc 0 132>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>; status = "disabled"; }; + timers6: timers@40001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001000 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>; + clock-names = "int"; + status = "disabled"; + + timer@5 { + compatible = "st,stm32-timer-trigger"; + reg = <5>; + status = "disabled"; + }; + }; + timer7: timer@40001400 { compatible = "st,stm32-timer"; reg = <0x40001400 0x400>; interrupts = <55>; - clocks = <&rcc 0 133>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>; + status = "disabled"; + }; + + timers7: timers@40001400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001400 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>; + clock-names = "int"; + status = "disabled"; + + timer@6 { + compatible = "st,stm32-timer-trigger"; + reg = <6>; + status = "disabled"; + }; + }; + + timers12: timers@40001800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001800 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM12)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@11 { + compatible = "st,stm32-timer-trigger"; + reg = <11>; + status = "disabled"; + }; + }; + + timers13: timers@40001c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001C00 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + timers14: timers@40002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40002000 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + rtc: rtc@40002800 { + compatible = "st,stm32-rtc"; + reg = <0x40002800 0x400>; + clocks = <&rcc 1 CLK_RTC>; + clock-names = "ck_rtc"; + assigned-clocks = <&rcc 1 CLK_RTC>; + assigned-clock-parents = <&rcc 1 CLK_LSE>; + interrupt-parent = <&exti>; + interrupts = <17 1>; + interrupt-names = "alarm"; + st,syscfg = <&pwrcfg>; status = "disabled"; }; @@ -122,7 +311,7 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40004400 0x400>; interrupts = <38>; - clocks = <&rcc 0 145>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART2)>; status = "disabled"; }; @@ -130,7 +319,7 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40004800 0x400>; interrupts = <39>; - clocks = <&rcc 0 146>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART3)>; status = "disabled"; dmas = <&dma1 1 4 0x400 0x0>, <&dma1 3 4 0x400 0x0>; @@ -141,7 +330,7 @@ compatible = "st,stm32-uart"; reg = <0x40004c00 0x400>; interrupts = <52>; - clocks = <&rcc 0 147>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART4)>; status = "disabled"; }; @@ -149,7 +338,19 @@ compatible = "st,stm32-uart"; reg = <0x40005000 0x400>; interrupts = <53>; - clocks = <&rcc 0 148>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART5)>; + status = "disabled"; + }; + + i2c1: i2c@40005400 { + compatible = "st,stm32f4-i2c"; + reg = <0x40005400 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc STM32F4_APB1_RESET(I2C1)>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C1)>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -157,7 +358,7 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40007800 0x400>; interrupts = <82>; - clocks = <&rcc 0 158>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART7)>; status = "disabled"; }; @@ -165,15 +366,57 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40007c00 0x400>; interrupts = <83>; - clocks = <&rcc 0 159>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART8)>; + status = "disabled"; + }; + + timers1: timers@40010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010000 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM1)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@0 { + compatible = "st,stm32-timer-trigger"; + reg = <0>; + status = "disabled"; + }; + }; + + timers8: timers@40010400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010400 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM8)>; + clock-names = "int"; status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@7 { + compatible = "st,stm32-timer-trigger"; + reg = <7>; + status = "disabled"; + }; }; usart1: serial@40011000 { compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40011000 0x400>; interrupts = <37>; - clocks = <&rcc 0 164>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART1)>; status = "disabled"; dmas = <&dma2 2 4 0x400 0x0>, <&dma2 7 4 0x400 0x0>; @@ -184,10 +427,53 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40011400 0x400>; interrupts = <71>; - clocks = <&rcc 0 165>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART6)>; status = "disabled"; }; + adc: adc@40012000 { + compatible = "st,stm32f4-adc-core"; + reg = <0x40012000 0x400>; + interrupts = <18>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>; + clock-names = "adc"; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + adc1: adc@0 { + compatible = "st,stm32f4-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>; + interrupt-parent = <&adc>; + interrupts = <0>; + status = "disabled"; + }; + + adc2: adc@100 { + compatible = "st,stm32f4-adc"; + #io-channel-cells = <1>; + reg = <0x100>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC2)>; + interrupt-parent = <&adc>; + interrupts = <1>; + status = "disabled"; + }; + + adc3: adc@200 { + compatible = "st,stm32f4-adc"; + #io-channel-cells = <1>; + reg = <0x200>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC3)>; + interrupt-parent = <&adc>; + interrupts = <2>; + status = "disabled"; + }; + }; + syscfg: system-config@40013800 { compatible = "syscon"; reg = <0x40013800 0x400>; @@ -201,6 +487,57 @@ interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; }; + timers9: timers@40014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014000 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM9)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@8 { + compatible = "st,stm32-timer-trigger"; + reg = <8>; + status = "disabled"; + }; + }; + + timers10: timers@40014400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014400 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + timers11: timers@40014800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014800 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + pwrcfg: power-config@40007000 { compatible = "syscon"; reg = <0x40007000 0x400>; @@ -219,7 +556,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x0 0x400>; - clocks = <&rcc 0 0>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>; st,bank-name = "GPIOA"; }; @@ -227,7 +564,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x400 0x400>; - clocks = <&rcc 0 1>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>; st,bank-name = "GPIOB"; }; @@ -235,7 +572,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x800 0x400>; - clocks = <&rcc 0 2>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>; st,bank-name = "GPIOC"; }; @@ -243,7 +580,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0xc00 0x400>; - clocks = <&rcc 0 3>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>; st,bank-name = "GPIOD"; }; @@ -251,7 +588,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1000 0x400>; - clocks = <&rcc 0 4>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>; st,bank-name = "GPIOE"; }; @@ -259,7 +596,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1400 0x400>; - clocks = <&rcc 0 5>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>; st,bank-name = "GPIOF"; }; @@ -267,7 +604,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1800 0x400>; - clocks = <&rcc 0 6>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>; st,bank-name = "GPIOG"; }; @@ -275,7 +612,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1c00 0x400>; - clocks = <&rcc 0 7>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>; st,bank-name = "GPIOH"; }; @@ -283,7 +620,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2000 0x400>; - clocks = <&rcc 0 8>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>; st,bank-name = "GPIOI"; }; @@ -291,7 +628,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2400 0x400>; - clocks = <&rcc 0 9>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>; st,bank-name = "GPIOJ"; }; @@ -299,7 +636,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2800 0x400>; - clocks = <&rcc 0 10>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>; st,bank-name = "GPIOK"; }; @@ -316,6 +653,19 @@ }; }; + usart3_pins_a: usart3@0 { + pins1 { + pinmux = <STM32F429_PB10_FUNC_USART3_TX>; + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32F429_PB11_FUNC_USART3_RX>; + bias-disable; + }; + }; + usbotg_hs_pins_a: usbotg_hs@0 { pins { pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>, @@ -355,6 +705,37 @@ slew-rate = <2>; }; }; + + adc3_in8_pin: adc@200 { + pins { + pinmux = <STM32F429_PF10_FUNC_ANALOG>; + }; + }; + + pwm1_pins: pwm@1 { + pins { + pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>, + <STM32F429_PB13_FUNC_TIM1_CH1N>, + <STM32F429_PB12_FUNC_TIM1_BKIN>; + }; + }; + + pwm3_pins: pwm@3 { + pins { + pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>, + <STM32F429_PB5_FUNC_TIM3_CH2>; + }; + }; + + i2c1_pins: i2c1@0 { + pins { + pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>, + <STM32F429_PB6_FUNC_I2C1_SCL>; + bias-disable; + drive-open-drain; + slew-rate = <3>; + }; + }; }; rcc: rcc@40023810 { @@ -362,8 +743,10 @@ #clock-cells = <2>; compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; reg = <0x40023800 0x400>; - clocks = <&clk_hse>; + clocks = <&clk_hse>, <&clk_i2s_ckin>; st,syscfg = <&pwrcfg>; + assigned-clocks = <&rcc 1 CLK_HSE_RTC>; + assigned-clock-rates = <1000000>; }; dma1: dma-controller@40026000 { @@ -377,7 +760,7 @@ <16>, <17>, <47>; - clocks = <&rcc 0 21>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA1)>; #dma-cells = <4>; }; @@ -392,7 +775,7 @@ <68>, <69>, <70>; - clocks = <&rcc 0 22>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2)>; #dma-cells = <4>; st,mem2mem; }; @@ -404,7 +787,9 @@ interrupts = <61>; interrupt-names = "macirq"; clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; - clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(ETHMAC)>, + <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACTX)>, + <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACRX)>; st,syscon = <&syscfg 0x4>; snps,pbl = <8>; snps,mixed-burst; @@ -415,7 +800,7 @@ compatible = "snps,dwc2"; reg = <0x40040000 0x40000>; interrupts = <77>; - clocks = <&rcc 0 29>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHS)>; clock-names = "otg"; status = "disabled"; }; @@ -424,12 +809,13 @@ compatible = "st,stm32-rng"; reg = <0x50060800 0x400>; interrupts = <80>; - clocks = <&rcc 0 38>; + clocks = <&rcc 0 STM32F4_AHB2_CLOCK(RNG)>; + }; }; }; &systick { - clocks = <&rcc 1 0>; + clocks = <&rcc 1 SYSTICK>; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts index 8877c00ce8e8..0dd56ef574fa 100644 --- a/arch/arm/boot/dts/stm32f469-disco.dts +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -58,7 +58,7 @@ }; memory { - reg = <0x00000000 0x800000>; + reg = <0x00000000 0x1000000>; }; aliases { @@ -78,6 +78,40 @@ clock-frequency = <8000000>; }; +&rtc { + status = "okay"; +}; + +&timers1 { + status = "okay"; + + pwm { + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + timer@0 { + status = "okay"; + }; +}; + +&timers3 { + status = "okay"; + + pwm { + pinctrl-0 = <&pwm3_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + timer@2 { + status = "okay"; + }; +}; + &usart3 { + pinctrl-0 = <&usart3_pins_a>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 39e368ec3428..f3fc27412a67 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -117,6 +117,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; @@ -186,20 +190,43 @@ &pio { emac_power_pin_a1000: emac_power_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15"; + function = "gpio_out"; }; led_pins_a1000: led_pins@0 { - allwinner,pins = "PH10", "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH10", "PH20"; + function = "gpio_out"; }; }; +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + ®_usb1_vbus { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index 5f98582232d6..942d739a4384 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -127,7 +127,7 @@ &pio { usb2_vbus_pin_a: usb2_vbus_pin@0 { - allwinner,pins = "PH12"; + pins = "PH12"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index 023b03efa5ff..17f8c5ec011c 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -142,17 +142,15 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 710e2ef516a8..04e040e6233d 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -165,17 +165,15 @@ &pio { led_pins_cubieboard: led_pins@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH20", "PH21"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts index 893497e397da..8317fbfeec4a 100644 --- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts +++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts @@ -178,45 +178,35 @@ &pio { bl_en_pin_dsrv9703c: bl_en_pin@0 { - allwinner,pins = "PH7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH7"; + function = "gpio_out"; }; codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15"; + function = "gpio_out"; }; motor_pins: motor_pins@0 { - allwinner,pins = "PB3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB3"; + function = "gpio_out"; }; touchscreen_pins: touchscreen_pins@0 { - allwinner,pins = "PB13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB13"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts index ac64781a0a9c..9616cdecce93 100644 --- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts +++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts @@ -156,10 +156,8 @@ &pio { codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index 6de83a6187d0..a48b46474417 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -129,17 +129,13 @@ pinctrl-0 = <&hackberry_hogs>; hackberry_hogs: hogs@0 { - allwinner,pins = "PH19"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH19"; + function = "gpio_out"; }; usb2_vbus_pin_hackberry: usb2_vbus_pin@0 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts index 9103864fef90..85dcf81ab64e 100644 --- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -93,17 +93,15 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; @@ -123,7 +121,7 @@ }; &usb2_vbus_pin_a { - allwinner,pins = "PH6"; + pins = "PH6"; }; &usb_otg { diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts index e09053bf5e1f..f3092703a1a6 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet1.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts @@ -180,31 +180,25 @@ &pio { bl_en_pin_inet: bl_en_pin@0 { - allwinner,pins = "PH7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH7"; + function = "gpio_out"; }; touchscreen_wake_pin: touchscreen_wake_pin@0 { - allwinner,pins = "PB13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB13"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 04b0d2d1ae6c..a1a2bbb3f9d3 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -161,17 +161,15 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index bba4f9cf9bf5..4ef2a60a8cd4 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -320,28 +320,25 @@ &pio { key_pins_inet9f: key_pins@0 { - allwinner,pins = "PA0", "PA1", "PA3", "PA4", - "PA5", "PA6", "PA8", "PA9", - "PA11", "PA12", "PA13", - "PA14", "PA15", "PA16", "PA17", - "PH22", "PH23", "PH24", "PH25", "PH26"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA0", "PA1", "PA3", "PA4", + "PA5", "PA6", "PA8", "PA9", + "PA11", "PA12", "PA13", + "PA14", "PA15", "PA16", "PA17", + "PH22", "PH23", "PH24", "PH25", "PH26"; + function = "gpio_in"; + bias-pull-up; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts index e28f080b1fd5..fc4d4d49e2e2 100644 --- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -163,17 +163,13 @@ &pio { emac_power_pin_q5: emac_power_pin@0 { - allwinner,pins = "PH19"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH19"; + function = "gpio_out"; }; led_pins_q5: led_pins@0 { - allwinner,pins = "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH20"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index 8e50723dbe02..a2885039d5f1 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -164,17 +164,14 @@ &pio { led_pins_marsboard: led_pins@0 { - allwinner,pins = "PB5", "PB6", "PB7", "PB8"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB5", "PB6", "PB7", "PB8"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index a7dd86d30fa2..af42ebb3a97b 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -93,7 +93,7 @@ &ir0_rx_pins_a { /* The ir receiver is not always populated */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &mmc0 { diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts index ee46ea854832..9c1afd4277d7 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts @@ -91,24 +91,18 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH4"; + function = "gpio_in"; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH5"; + function = "gpio_in"; }; usb2_vbus_pin_mk802: usb2_vbus_pin@0 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index b350448c7217..214a5accfe93 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -168,31 +168,26 @@ &pio { ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC3"; + function = "gpio_out"; }; led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 39034aa8e1ae..b0365d63ba70 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -170,24 +170,19 @@ &pio { led_pins_pcduino: led_pins@0 { - allwinner,pins = "PH15", "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15", "PH16"; + function = "gpio_out"; }; key_pins_pcduino: key_pins@0 { - allwinner,pins = "PH17", "PH18", "PH19"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH17", "PH18", "PH19"; + function = "gpio_in"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts index de483a1bf36a..811d00ee2ade 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts @@ -57,10 +57,8 @@ &pio { usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 { - allwinner,pins = "PD2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PD2"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts index 918f97294b33..bfa6bbdaab27 100644 --- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts @@ -164,38 +164,30 @@ &pio { bl_en_pin_protab: bl_en_pin@0 { - allwinner,pins = "PH7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH7"; + function = "gpio_out"; }; codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15"; + function = "gpio_out"; }; touchscreen_pins: touchscreen_pins@0 { - allwinner,pins = "PA5", "PB13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA5", "PB13"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index b14a4281058d..ba20b48c0702 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -975,190 +975,142 @@ #gpio-cells = <3>; emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "emac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + function = "emac"; }; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB0", "PB1"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB18", "PB19"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB18", "PB19"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB20", "PB21"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB20", "PB21"; + function = "i2c2"; }; ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB4"; + function = "ir0"; }; ir0_tx_pins_a: ir0@1 { - allwinner,pins = "PB3"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB3"; + function = "ir0"; }; ir1_rx_pins_a: ir1@0 { - allwinner,pins = "PB23"; - allwinner,function = "ir1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB23"; + function = "ir1"; }; ir1_tx_pins_a: ir1@1 { - allwinner,pins = "PB22"; - allwinner,function = "ir1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB22"; + function = "ir1"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", - "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH1"; + function = "gpio_in"; + bias-pull-up; }; ps20_pins_a: ps20@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "ps2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI20", "PI21"; + function = "ps2"; }; ps21_pins_a: ps21@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "ps2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12", "PH13"; + function = "ps2"; }; pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "pwm"; }; pwm1_pins_a: pwm1@0 { - allwinner,pins = "PI3"; - allwinner,function = "pwm"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI3"; + function = "pwm"; }; spdif_tx_pins_a: spdif@0 { - allwinner,pins = "PB13"; - allwinner,function = "spdif"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB13"; + function = "spdif"; + bias-pull-up; }; spi0_pins_a: spi0@0 { - allwinner,pins = "PI11", "PI12", "PI13"; - allwinner,function = "spi0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI11", "PI12", "PI13"; + function = "spi0"; }; spi0_cs0_pins_a: spi0_cs0@0 { - allwinner,pins = "PI10"; - allwinner,function = "spi0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI10"; + function = "spi0"; }; spi1_pins_a: spi1@0 { - allwinner,pins = "PI17", "PI18", "PI19"; - allwinner,function = "spi1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI17", "PI18", "PI19"; + function = "spi1"; }; spi1_cs0_pins_a: spi1_cs0@0 { - allwinner,pins = "PI16"; - allwinner,function = "spi1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI16"; + function = "spi1"; }; spi2_pins_a: spi2@0 { - allwinner,pins = "PC20", "PC21", "PC22"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC20", "PC21", "PC22"; + function = "spi2"; }; spi2_pins_b: spi2@1 { - allwinner,pins = "PB15", "PB16", "PB17"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB15", "PB16", "PB17"; + function = "spi2"; }; spi2_cs0_pins_a: spi2_cs0@0 { - allwinner,pins = "PC19"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC19"; + function = "spi2"; }; spi2_cs0_pins_b: spi2_cs0@1 { - allwinner,pins = "PB14"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB14"; + function = "spi2"; }; uart0_pins_a: uart0@0 { - allwinner,pins = "PB22", "PB23"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB22", "PB23"; + function = "uart0"; }; uart0_pins_b: uart0@1 { - allwinner,pins = "PF2", "PF4"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF2", "PF4"; + function = "uart0"; }; uart1_pins_a: uart1@0 { - allwinner,pins = "PA10", "PA11"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA10", "PA11"; + function = "uart1"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts index d4ad02182353..a539b72ce093 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts @@ -109,17 +109,15 @@ &pio { mmc0_cd_pin_t003: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; led_pins_t003: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "gpio_out"; + drive-strength = <20>; }; }; @@ -140,11 +138,11 @@ }; &usb0_vbus_pin_a { - allwinner,pins = "PG13"; + pins = "PG13"; }; &usb1_vbus_pin_a { - allwinner,pins = "PB10"; + pins = "PB10"; }; &usb_otg { diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index 2150e15e115a..e1b5e8a446fe 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -130,31 +130,26 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG12"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG12"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_t004: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 { - allwinner,pins = "PB18"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB18"; + function = "gpio_out"; }; led_pins_t004: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "gpio_out"; + drive-strength = <20>; }; }; @@ -175,7 +170,7 @@ }; &usb1_vbus_pin_a { - allwinner,pins = "PG13"; + pins = "PG13"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts index c84ac005342e..020aa9d6c31d 100644 --- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts +++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts @@ -116,24 +116,19 @@ &pio { led_pins_mk802: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "gpio_out"; }; mmc0_cd_pin_mk802: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_mk802: usb1_vbus_pin@0 { - allwinner,pins = "PB10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB10"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 0684d7930d65..d8245c6314a7 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -202,38 +202,32 @@ &pio { mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { - allwinner,pins = "PG13"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG13"; + function = "gpio_in"; + bias-pull-up; }; led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PE3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE3"; + function = "gpio_out"; + drive-strength = <20>; }; usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 { - allwinner,pins = "PB10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB10"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG12"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG12"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -279,7 +273,7 @@ }; &usb0_vbus_pin_a { - allwinner,pins = "PG11"; + pins = "PG11"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts index 3b057983c74a..51371f9b1cf0 100644 --- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -101,24 +101,20 @@ &pio { mmc0_cd_pin_r7: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; led_pins_r7: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "gpio_out"; + drive-strength = <20>; }; usb1_vbus_pin_r7: usb1_vbus_pin@0 { - allwinner,pins = "PG13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG13"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts index b5de75f4c710..2b8adda0deda 100644 --- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts +++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts @@ -146,24 +146,19 @@ &pio { led_pins_wobo_i5: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "gpio_out"; }; mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 { - allwinner,pins = "PB3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB3"; + function = "gpio_in"; + bias-pull-up; }; emac_power_pin_wobo: emac_power_pin@0 { - allwinner,pins = "PA02"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA02"; + function = "gpio_out"; }; }; @@ -223,7 +218,7 @@ }; &usb1_vbus_pin_a { - allwinner,pins = "PG12"; + pins = "PG12"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 7aa8c7aa0153..24b0f5f556f8 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -65,8 +65,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, - <&ahb_gates 43>, <&ahb_gates 44>; + clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_HDMI>, + <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DRAM_DE_BE>, + <&ccu CLK_DE_BE>, <&ccu CLK_HDMI>; status = "disabled"; }; @@ -74,8 +75,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, - <&ahb_gates 44>; + clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>; status = "disabled"; }; @@ -83,77 +84,19 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 34>, - <&ahb_gates 36>, <&ahb_gates 44>; + clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>, + <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>; status = "disabled"; }; }; - clocks { - ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a10s-ahb-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb>; - clock-indices = <0>, <1>, - <2>, <5>, <6>, - <7>, <8>, <9>, - <10>, <13>, - <14>, <17>, <18>, - <20>, <21>, <22>, - <26>, <28>, <32>, - <34>, <36>, <40>, - <43>, <44>, - <46>, <51>, - <52>; - clock-output-names = "ahb_usbotg", "ahb_ehci", - "ahb_ohci", "ahb_ss", "ahb_dma", - "ahb_bist", "ahb_mmc0", "ahb_mmc1", - "ahb_mmc2", "ahb_nand", - "ahb_sdram", "ahb_emac", "ahb_ts", - "ahb_spi0", "ahb_spi1", "ahb_spi2", - "ahb_gps", "ahb_stimer", "ahb_ve", - "ahb_tve", "ahb_lcd", "ahb_csi", - "ahb_hdmi", "ahb_de_be", - "ahb_de_fe", "ahb_iep", - "ahb_mali400"; - }; - - apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a10s-apb0-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb0>; - clock-indices = <0>, <3>, - <5>, <6>, - <10>; - clock-output-names = "apb0_codec", "apb0_iis", - "apb0_pio", "apb0_ir", - "apb0_keypad"; - }; - - apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a10s-apb1-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <16>, - <17>, <18>, - <19>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_uart0", - "apb1_uart1", "apb1_uart2", - "apb1_uart3"; - }; - }; - soc@01c00000 { emac: ethernet@01c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <55>; - clocks = <&ahb_gates 17>; + clocks = <&ccu CLK_AHB_EMAC>; allwinner,sram = <&emac_sram 1>; status = "disabled"; }; @@ -169,7 +112,7 @@ pwm: pwm@01c20e00 { compatible = "allwinner,sun5i-a10s-pwm"; reg = <0x01c20e00 0xc>; - clocks = <&osc24M>; + clocks = <&ccu CLK_HOSC>; #pwm-cells = <3>; status = "disabled"; }; @@ -180,7 +123,7 @@ interrupts = <1>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 16>; + clocks = <&ccu CLK_APB1_UART0>; status = "disabled"; }; @@ -190,71 +133,62 @@ interrupts = <3>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 18>; + clocks = <&ccu CLK_APB1_UART2>; status = "disabled"; }; }; }; +&ccu { + compatible = "allwinner,sun5i-a10s-ccu"; +}; + &pio { compatible = "allwinner,sun5i-a10s-pinctrl"; uart0_pins_a: uart0@0 { - allwinner,pins = "PB19", "PB20"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB19", "PB20"; + function = "uart0"; }; uart2_pins_a: uart2@0 { - allwinner,pins = "PC18", "PC19"; - allwinner,function = "uart2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC18", "PC19"; + function = "uart2"; }; emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", + pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PA16"; - allwinner,function = "emac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "emac"; }; emac_pins_b: emac0@1 { - allwinner,pins = "PD6", "PD7", "PD10", + pins = "PD6", "PD7", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", "PD24", "PD25", "PD26", "PD27"; - allwinner,function = "emac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "emac"; }; mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG3", "PG4", "PG5", + pins = "PG3", "PG4", "PG5", "PG6", "PG7", "PG8"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc1"; + drive-strength = <30>; }; spi2_pins_b: spi2@1 { - allwinner,pins = "PB12", "PB13", "PB14"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB12", "PB13", "PB14"; + function = "spi2"; }; spi2_cs0_pins_b: spi2_cs0@1 { - allwinner,pins = "PB11"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB11"; + function = "spi2"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts index 6efbba6d40a9..42435454acef 100644 --- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts +++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts @@ -137,24 +137,21 @@ &pio { mmc0_cd_pin_d709: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-down; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -212,7 +209,7 @@ }; &usb0_vbus_pin_a { - allwinner,pins = "PG12"; + pins = "PG12"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index 3724b988064e..5879a75cf97a 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -136,24 +136,20 @@ &pio { mmc0_cd_pin_h702: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG1"; + function = "gpio_in"; }; }; @@ -208,7 +204,7 @@ }; &usb0_vbus_pin_a { - allwinner,pins = "PG12"; + pins = "PG12"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts new file mode 100644 index 000000000000..566cda91a66b --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts @@ -0,0 +1,224 @@ +/* + * Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz> + * + * Based on sun5i-a13-olinuxino.dts, which is + * Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com> + * Copyright 2013 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Lichee Pi One"; + compatible = "licheepi,licheepi-one", "allwinner,sun5i-a13"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + red { + label ="licheepi:red:usr"; + gpios = <&pio 2 5 GPIO_ACTIVE_LOW>; + }; + + green { + label ="licheepi:green:usr"; + gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + blue { + label ="licheepi:blue:usr"; + gpios = <&pio 2 4 GPIO_ACTIVE_LOW>; + }; + + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "disabled"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "disabled"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@984 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <984126>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + broken-cd; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + broken-cd; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "csi-1.8v"; +}; + +®_ldo4 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "csi-2.8v"; +}; + +®_usb0_vbus { + gpio = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 081329e2b80b..60e393e28783 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -115,45 +115,37 @@ &pio { mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; }; led_pins_olinuxinom: led_pins@0 { - allwinner,pins = "PG9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG9"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-down; }; usb0_vbus_pin_olinuxinom: usb0_vbus_pin@0 { - allwinner,pins = "PG12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG12"; + function = "gpio_out"; }; usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 { - allwinner,pins = "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG11"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index bb7210e0e4a9..940d47e88056 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -206,38 +206,32 @@ &pio { mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; }; led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PG9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG9"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-down; }; usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { - allwinner,pins = "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG11"; + function = "gpio_out"; }; }; @@ -277,7 +271,7 @@ }; &usb0_vbus_pin_a { - allwinner,pins = "PG12"; + pins = "PG12"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts index 3d7ff10a48e9..bfdd38d6bfcc 100644 --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -80,7 +80,7 @@ }; &codec_pa_pin { - allwinner,pins = "PG3"; + pins = "PG3"; }; &mmc2 { @@ -100,10 +100,9 @@ &pio { i2c_lcd_pins: i2c_lcd_pin@0 { - allwinner,pins = "PG10", "PG12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG10", "PG12"; + function = "gpio_out"; + bias-pull-up; }; }; @@ -131,5 +130,5 @@ }; &usb0_vbus_pin_a { - allwinner,pins = "PB4"; + pins = "PB4"; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index a17ba0243db3..fb2ddb9a04c9 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -61,8 +61,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&de_be_clk>, - <&tcon_ch0_clk>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>; status = "disabled"; }; }; @@ -99,114 +99,6 @@ }; }; - clocks { - ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-ahb-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb>; - clock-indices = <0>, <1>, - <2>, <5>, <6>, - <7>, <8>, <9>, - <10>, <13>, - <14>, <20>, - <21>, <22>, - <28>, <32>, <34>, - <36>, <40>, <44>, - <46>, <51>, - <52>; - clock-output-names = "ahb_usbotg", "ahb_ehci", - "ahb_ohci", "ahb_ss", "ahb_dma", - "ahb_bist", "ahb_mmc0", "ahb_mmc1", - "ahb_mmc2", "ahb_nand", - "ahb_sdram", "ahb_spi0", - "ahb_spi1", "ahb_spi2", - "ahb_stimer", "ahb_ve", "ahb_tve", - "ahb_lcd", "ahb_csi", "ahb_de_be", - "ahb_de_fe", "ahb_iep", - "ahb_mali400"; - }; - - apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-apb0-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb0>; - clock-indices = <0>, <5>, - <6>; - clock-output-names = "apb0_codec", "apb0_pio", - "apb0_ir"; - }; - - apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-apb1-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <17>, - <19>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_uart1", - "apb1_uart3"; - }; - - dram_gates: clk@01c20100 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-dram-gates-clk", - "allwinner,sun4i-a10-gates-clk"; - reg = <0x01c20100 0x4>; - clocks = <&pll5 0>; - clock-indices = <0>, - <1>, - <25>, - <26>, - <29>, - <31>; - clock-output-names = "dram_ve", - "dram_csi", - "dram_de_fe", - "dram_de_be", - "dram_ace", - "dram_iep"; - }; - - de_be_clk: clk@01c20104 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20104 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-be"; - }; - - de_fe_clk: clk@01c2010c { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c2010c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-fe"; - }; - - tcon_ch0_clk: clk@01c20118 { - #clock-cells = <0>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; - reg = <0x01c20118 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon-ch0-sclk"; - }; - - tcon_ch1_clk: clk@01c2012c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; - reg = <0x01c2012c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon-ch1-sclk"; - }; - }; - display-engine { compatible = "allwinner,sun5i-a13-display-engine"; allwinner,pipelines = <&fe0>; @@ -217,11 +109,11 @@ compatible = "allwinner,sun5i-a13-tcon"; reg = <0x01c0c000 0x1000>; interrupts = <44>; - resets = <&tcon_ch0_clk 1>; + resets = <&ccu RST_LCD>; reset-names = "lcd"; - clocks = <&ahb_gates 36>, - <&tcon_ch0_clk>, - <&tcon_ch1_clk>; + clocks = <&ccu CLK_AHB_LCD>, + <&ccu CLK_TCON_CH0>, + <&ccu CLK_TCON_CH1>; clock-names = "ahb", "tcon-ch0", "tcon-ch1"; @@ -254,7 +146,7 @@ pwm: pwm@01c20e00 { compatible = "allwinner,sun5i-a13-pwm"; reg = <0x01c20e00 0xc>; - clocks = <&osc24M>; + clocks = <&ccu CLK_HOSC>; #pwm-cells = <3>; status = "disabled"; }; @@ -263,11 +155,11 @@ compatible = "allwinner,sun5i-a13-display-frontend"; reg = <0x01e00000 0x20000>; interrupts = <47>; - clocks = <&ahb_gates 46>, <&de_fe_clk>, - <&dram_gates 25>; + clocks = <&ccu CLK_DE_FE>, <&ccu CLK_DE_FE>, + <&ccu CLK_DRAM_DE_FE>; clock-names = "ahb", "mod", "ram"; - resets = <&de_fe_clk>; + resets = <&ccu RST_DE_FE>; status = "disabled"; ports { @@ -290,14 +182,14 @@ be0: display-backend@01e60000 { compatible = "allwinner,sun5i-a13-display-backend"; reg = <0x01e60000 0x10000>; - clocks = <&ahb_gates 44>, <&de_be_clk>, - <&dram_gates 26>; + clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>; clock-names = "ahb", "mod", "ram"; - resets = <&de_be_clk>; + resets = <&ccu RST_DE_BE>; status = "disabled"; - assigned-clocks = <&de_be_clk>; + assigned-clocks = <&ccu CLK_DE_BE>; assigned-clock-rates = <300000000>; ports { @@ -330,6 +222,10 @@ }; }; +&ccu { + compatible = "allwinner,sun5i-a13-ccu"; +}; + &cpu0 { clock-latency = <244144>; /* 8 32k periods */ operating-points = < @@ -350,26 +246,20 @@ compatible = "allwinner,sun5i-a13-pinctrl"; lcd_rgb666_pins: lcd_rgb666@0 { - allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", - "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", - "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", - "PD24", "PD25", "PD26", "PD27"; - allwinner,function = "lcd0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; }; uart1_pins_a: uart1@0 { - allwinner,pins = "PE10", "PE11"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE10", "PE11"; + function = "uart1"; }; uart1_pins_b: uart1@1 { - allwinner,pins = "PG3", "PG4"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG3", "PG4"; + function = "uart1"; }; }; diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts index 92a2dc6250a5..0cf0813d363a 100644 --- a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts +++ b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts @@ -159,17 +159,13 @@ &pio { usb0_id_pin_chip_pro: usb0-id-pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG2"; + function = "gpio_in"; }; wifi_reg_on_pin_chip_pro: wifi-reg-on-pin@0 { - allwinner,pins = "PB10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB10"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts index 030605aa8065..1a845af4d4db 100644 --- a/arch/arm/boot/dts/sun5i-gr8-evb.dts +++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts @@ -259,31 +259,23 @@ &pio { mmc0_cd_pin_gr8_evb: mmc0-cd-pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG0"; + function = "gpio_in"; }; usb0_id_pin_gr8_evb: usb0-id-pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG2"; + function = "gpio_in"; }; usb0_vbus_det_pin_gr8_evb: usb0-vbus-det-pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG1"; + function = "gpio_in"; }; usb1_vbus_pin_gr8_evb: usb1-vbus-pin@0 { - allwinner,pins = "PG13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG13"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun5i-gr8.dtsi b/arch/arm/boot/dts/sun5i-gr8.dtsi index ea86d4d58db6..cb9b2aaf7297 100644 --- a/arch/arm/boot/dts/sun5i-gr8.dtsi +++ b/arch/arm/boot/dts/sun5i-gr8.dtsi @@ -42,9 +42,10 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include <dt-bindings/clock/sun4i-a10-pll2.h> +#include <dt-bindings/clock/sun5i-ccu.h> #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/reset/sun5i-ccu.h> / { interrupt-parent = <&intc>; @@ -59,7 +60,7 @@ device_type = "cpu"; compatible = "arm,cortex-a8"; reg = <0x0>; - clocks = <&cpu>; + clocks = <&ccu CLK_CPU>; }; }; @@ -68,419 +69,19 @@ #size-cells = <1>; ranges; - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - osc24M: clk@01c20050 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; + compatible = "fixed-clock"; clock-frequency = <24000000>; clock-output-names = "osc24M"; }; - osc3M: osc3M-clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "osc3M"; - }; - osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; clock-output-names = "osc32k"; }; - - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll2: clk@01c20008 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-pll2-clk"; - reg = <0x01c20008 0x8>; - clocks = <&osc24M>; - clock-output-names = "pll2-1x", "pll2-2x", - "pll2-4x", "pll2-8x"; - }; - - pll3: clk@01c20010 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20010 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll3"; - }; - - pll3x2: pll3x2-clk { - compatible = "allwinner,sun4i-a10-pll3-2x-clk"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll3>; - clock-output-names = "pll3-2x"; - }; - - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - - pll7: clk@01c20030 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20030 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll7"; - }; - - pll7x2: pll7x2-clk { - compatible = "allwinner,sun4i-a10-pll3-2x-clk"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll7>; - clock-output-names = "pll7-2x"; - }; - - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb: ahb@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>, <&cpu>, <&pll6 1>; - clock-output-names = "ahb"; - /* - * Use PLL6 as parent, instead of CPU/AXI - * which has rate changes due to cpufreq - */ - assigned-clocks = <&ahb>; - assigned-clock-parents = <&pll6 1>; - }; - - apb0: apb0@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; - clock-output-names = "apb0"; - }; - - apb1: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1"; - }; - - axi_gates: clk@01c2005c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-gates-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&axi>; - clock-indices = <0>; - clock-output-names = "axi_dram"; - }; - - ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-ahb-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb>; - clock-indices = <0>, <1>, - <2>, <5>, <6>, - <7>, <8>, <9>, - <10>, <13>, - <14>, <17>, <20>, - <21>, <22>, - <28>, <32>, <34>, - <36>, <40>, <44>, - <46>, <51>, - <52>; - clock-output-names = "ahb_usbotg", "ahb_ehci", - "ahb_ohci", "ahb_ss", "ahb_dma", - "ahb_bist", "ahb_mmc0", "ahb_mmc1", - "ahb_mmc2", "ahb_nand", - "ahb_sdram", "ahb_emac", "ahb_spi0", - "ahb_spi1", "ahb_spi2", - "ahb_hstimer", "ahb_ve", "ahb_tve", - "ahb_lcd", "ahb_csi", "ahb_de_be", - "ahb_de_fe", "ahb_iep", - "ahb_mali400"; - }; - - apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb0>; - clock-indices = <0>, <3>, - <5>, <6>; - clock-output-names = "apb0_codec", "apb0_i2s0", - "apb0_pio", "apb0_ir"; - }; - - apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <17>, - <18>, <19>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_uart1", - "apb1_uart2", "apb1_uart3"; - }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "nand"; - }; - - ms_clk: clk@01c20084 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20084 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ms"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - ts_clk: clk@01c20098 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20098 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ts"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi2"; - }; - - ir0_clk: clk@01c200b0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; - - i2s0_clk: clk@01c200b8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200b8 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "i2s0"; - }; - - spdif_clk: clk@01c200c0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200c0 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "spdif"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_phy"; - }; - - dram_gates: clk@01c20100 { - #clock-cells = <1>; - compatible = "nextthing,gr8-dram-gates-clk", - "allwinner,sun4i-a10-gates-clk"; - reg = <0x01c20100 0x4>; - clocks = <&pll5 0>; - clock-indices = <0>, - <1>, - <25>, - <26>, - <29>, - <31>; - clock-output-names = "dram_ve", - "dram_csi", - "dram_de_fe", - "dram_de_be", - "dram_ace", - "dram_iep"; - }; - - de_be_clk: clk@01c20104 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20104 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-be"; - }; - - de_fe_clk: clk@01c2010c { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c2010c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-fe"; - }; - - tcon_ch0_clk: clk@01c20118 { - #clock-cells = <0>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; - reg = <0x01c20118 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon-ch0-sclk"; - }; - - tcon_ch1_clk: clk@01c2012c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; - reg = <0x01c2012c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon-ch1-sclk"; - }; - - codec_clk: clk@01c20140 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-codec-clk"; - reg = <0x01c20140 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "codec"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mbus"; - }; }; display-engine { @@ -528,7 +129,7 @@ compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; interrupts = <27>; - clocks = <&ahb_gates 6>; + clocks = <&ccu CLK_AHB_DMA>; #dma-cells = <2>; }; @@ -536,7 +137,7 @@ compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <37>; - clocks = <&ahb_gates 13>, <&nand_clk>; + clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 3>; dma-names = "rxtx"; @@ -549,7 +150,7 @@ compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; - clocks = <&ahb_gates 20>, <&spi0_clk>; + clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 27>, <&dma SUN4I_DMA_DEDICATED 26>; @@ -563,7 +164,7 @@ compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c06000 0x1000>; interrupts = <11>; - clocks = <&ahb_gates 21>, <&spi1_clk>; + clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 9>, <&dma SUN4I_DMA_DEDICATED 8>; @@ -576,8 +177,8 @@ tve0: tv-encoder@01c0a000 { compatible = "allwinner,sun4i-a10-tv-encoder"; reg = <0x01c0a000 0x1000>; - clocks = <&ahb_gates 34>; - resets = <&tcon_ch0_clk 0>; + clocks = <&ccu CLK_AHB_TVE>; + resets = <&ccu RST_TVE>; status = "disabled"; port { @@ -595,11 +196,11 @@ compatible = "allwinner,sun5i-a13-tcon"; reg = <0x01c0c000 0x1000>; interrupts = <44>; - resets = <&tcon_ch0_clk 1>; + resets = <&ccu RST_LCD>; reset-names = "lcd"; - clocks = <&ahb_gates 36>, - <&tcon_ch0_clk>, - <&tcon_ch1_clk>; + clocks = <&ccu CLK_AHB_LCD>, + <&ccu CLK_TCON_CH0>, + <&ccu CLK_TCON_CH1>; clock-names = "ahb", "tcon-ch0", "tcon-ch1"; @@ -637,14 +238,8 @@ mmc0: mmc@01c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; interrupts = <32>; status = "disabled"; #address-cells = <1>; @@ -654,14 +249,8 @@ mmc1: mmc@01c10000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ahb_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; interrupts = <33>; status = "disabled"; #address-cells = <1>; @@ -671,14 +260,8 @@ mmc2: mmc@01c11000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; interrupts = <34>; status = "disabled"; #address-cells = <1>; @@ -688,7 +271,7 @@ usb_otg: usb@01c13000 { compatible = "allwinner,sun4i-a10-musb"; reg = <0x01c13000 0x0400>; - clocks = <&ahb_gates 0>; + clocks = <&ccu CLK_AHB_OTG>; interrupts = <38>; interrupt-names = "mc"; phys = <&usbphy 0>; @@ -705,9 +288,9 @@ compatible = "allwinner,sun5i-a13-usb-phy"; reg = <0x01c13400 0x10 0x01c14800 0x4>; reg-names = "phy_ctrl", "pmu1"; - clocks = <&usb_clk 8>; + clocks = <&ccu CLK_USB_PHY0>; clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>; + resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>; reset-names = "usb0_reset", "usb1_reset"; status = "disabled"; }; @@ -716,7 +299,7 @@ compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; interrupts = <39>; - clocks = <&ahb_gates 1>; + clocks = <&ccu CLK_AHB_EHCI>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; @@ -726,7 +309,7 @@ compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; interrupts = <40>; - clocks = <&usb_clk 6>, <&ahb_gates 2>; + clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; @@ -736,7 +319,7 @@ compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; interrupts = <12>; - clocks = <&ahb_gates 22>, <&spi2_clk>; + clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 29>, <&dma SUN4I_DMA_DEDICATED 28>; @@ -746,6 +329,15 @@ #size-cells = <0>; }; + ccu: clock@01c20000 { + compatible = "nextthing,gr8-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + intc: interrupt-controller@01c20400 { compatible = "allwinner,sun4i-a10-ic"; reg = <0x01c20400 0x400>; @@ -757,164 +349,126 @@ compatible = "nextthing,gr8-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <28>; - clocks = <&apb0_gates 5>; + clocks = <&ccu CLK_APB0_PIO>; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB0", "PB1"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB15", "PB16"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB15", "PB16"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB17", "PB18"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB17", "PB18"; + function = "i2c2"; }; i2s0_data_pins_a: i2s0-data@0 { - allwinner,pins = "PB6", "PB7", "PB8", "PB9"; - allwinner,function = "i2s0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB6", "PB7", "PB8", "PB9"; + function = "i2s0"; }; i2s0_mclk_pins_a: i2s0-mclk@0 { - allwinner,pins = "PB5"; - allwinner,function = "i2s0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB5"; + function = "i2s0"; }; ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB4"; + function = "ir0"; }; lcd_rgb666_pins: lcd-rgb666@0 { - allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", "PD24", "PD25", "PD26", "PD27"; - allwinner,function = "lcd0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "lcd0"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", "PF3", + pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc0"; + drive-strength = <30>; }; nand_pins_a: nand-base0@0 { - allwinner,pins = "PC0", "PC1", "PC2", + pins = "PC0", "PC1", "PC2", "PC5", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15"; - allwinner,function = "nand0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "nand0"; }; nand_cs0_pins_a: nand-cs@0 { - allwinner,pins = "PC4"; - allwinner,function = "nand0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC4"; + function = "nand0"; }; nand_rb0_pins_a: nand-rb@0 { - allwinner,pins = "PC6"; - allwinner,function = "nand0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC6"; + function = "nand0"; }; pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "pwm0"; }; pwm1_pins: pwm1 { - allwinner,pins = "PG13"; - allwinner,function = "pwm1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG13"; + function = "pwm1"; }; spdif_tx_pins_a: spdif@0 { - allwinner,pins = "PB10"; - allwinner,function = "spdif"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB10"; + function = "spdif"; + bias-pull-up; }; uart1_pins_a: uart1@1 { - allwinner,pins = "PG3", "PG4"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG3", "PG4"; + function = "uart1"; }; uart1_cts_rts_pins_a: uart1-cts-rts@0 { - allwinner,pins = "PG5", "PG6"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG5", "PG6"; + function = "uart1"; }; uart2_pins_a: uart2@1 { - allwinner,pins = "PD2", "PD3"; - allwinner,function = "uart2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PD2", "PD3"; + function = "uart2"; }; uart2_cts_rts_pins_a: uart2-cts-rts@0 { - allwinner,pins = "PD4", "PD5"; - allwinner,function = "uart2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PD4", "PD5"; + function = "uart2"; }; uart3_pins_a: uart3@1 { - allwinner,pins = "PG9", "PG10"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG9", "PG10"; + function = "uart3"; }; uart3_cts_rts_pins_a: uart3-cts-rts@0 { - allwinner,pins = "PG11", "PG12"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG11", "PG12"; + function = "uart3"; }; }; pwm: pwm@01c20e00 { compatible = "allwinner,sun5i-a10s-pwm"; reg = <0x01c20e00 0xc>; - clocks = <&osc24M>; + clocks = <&ccu CLK_HOSC>; #pwm-cells = <3>; status = "disabled"; }; @@ -923,7 +477,7 @@ compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; interrupts = <22>; - clocks = <&osc24M>; + clocks = <&ccu CLK_HOSC>; }; wdt: watchdog@01c20c90 { @@ -936,7 +490,7 @@ compatible = "allwinner,sun4i-a10-spdif"; reg = <0x01c21000 0x400>; interrupts = <13>; - clocks = <&apb0_gates 1>, <&spdif_clk>; + clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>; clock-names = "apb", "spdif"; dmas = <&dma SUN4I_DMA_NORMAL 2>, <&dma SUN4I_DMA_NORMAL 2>; @@ -946,7 +500,7 @@ ir0: ir@01c21800 { compatible = "allwinner,sun4i-a10-ir"; - clocks = <&apb0_gates 6>, <&ir0_clk>; + clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>; clock-names = "apb", "ir"; interrupts = <5>; reg = <0x01c21800 0x40>; @@ -958,7 +512,7 @@ compatible = "allwinner,sun4i-a10-i2s"; reg = <0x01c22400 0x400>; interrupts = <16>; - clocks = <&apb0_gates 3>, <&i2s0_clk>; + clocks = <&ccu CLK_APB0_I2S>, <&ccu CLK_I2S>; clock-names = "apb", "mod"; dmas = <&dma SUN4I_DMA_NORMAL 3>, <&dma SUN4I_DMA_NORMAL 3>; @@ -978,7 +532,7 @@ compatible = "allwinner,sun4i-a10-codec"; reg = <0x01c22c00 0x40>; interrupts = <30>; - clocks = <&apb0_gates 0>, <&codec_clk>; + clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; clock-names = "apb", "codec"; dmas = <&dma SUN4I_DMA_NORMAL 19>, <&dma SUN4I_DMA_NORMAL 19>; @@ -999,7 +553,7 @@ interrupts = <2>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 17>; + clocks = <&ccu CLK_APB1_UART1>; status = "disabled"; }; @@ -1009,7 +563,7 @@ interrupts = <3>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 18>; + clocks = <&ccu CLK_APB1_UART2>; status = "disabled"; }; @@ -1019,7 +573,7 @@ interrupts = <4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 19>; + clocks = <&ccu CLK_APB1_UART3>; status = "disabled"; }; @@ -1027,7 +581,7 @@ compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; - clocks = <&apb1_gates 0>; + clocks = <&ccu CLK_APB1_I2C0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -1037,7 +591,7 @@ compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; - clocks = <&apb1_gates 1>; + clocks = <&ccu CLK_APB1_I2C1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -1047,7 +601,7 @@ compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; - clocks = <&apb1_gates 2>; + clocks = <&ccu CLK_APB1_I2C2>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -1057,18 +611,18 @@ compatible = "allwinner,sun5i-a13-hstimer"; reg = <0x01c60000 0x1000>; interrupts = <82>, <83>; - clocks = <&ahb_gates 28>; + clocks = <&ccu CLK_AHB_HSTIMER>; }; fe0: display-frontend@01e00000 { compatible = "allwinner,sun5i-a13-display-frontend"; reg = <0x01e00000 0x20000>; interrupts = <47>; - clocks = <&ahb_gates 46>, <&de_fe_clk>, - <&dram_gates 25>; + clocks = <&ccu CLK_AHB_DE_FE>, <&ccu CLK_DE_FE>, + <&ccu CLK_DRAM_DE_FE>; clock-names = "ahb", "mod", "ram"; - resets = <&de_fe_clk>; + resets = <&ccu RST_DE_FE>; status = "disabled"; ports { @@ -1091,14 +645,14 @@ be0: display-backend@01e60000 { compatible = "allwinner,sun5i-a13-display-backend"; reg = <0x01e60000 0x10000>; - clocks = <&ahb_gates 44>, <&de_be_clk>, - <&dram_gates 26>; + clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>; clock-names = "ahb", "mod", "ram"; - resets = <&de_be_clk>; + resets = <&ccu RST_DE_BE>; status = "disabled"; - assigned-clocks = <&de_be_clk>; + assigned-clocks = <&ccu CLK_DE_BE>; assigned-clock-rates = <300000000>; ports { diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index c6da5ad37152..e86fa46fdd45 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -154,7 +154,7 @@ }; &mmc0_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &mmc0 { @@ -177,31 +177,24 @@ &pio { chip_vbus_pin: chip_vbus_pin@0 { - allwinner,pins = "PB10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB10"; + function = "gpio_out"; }; chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 { - allwinner,pins = "PC19"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC19"; + function = "gpio_out"; }; chip_id_det_pin: chip_id_det_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG2"; + function = "gpio_in"; }; chip_w1_pin: chip_w1_pin@0 { - allwinner,pins = "PD2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PD2"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/sun5i-r8.dtsi index 8b058f53b7dc..4c1141396c99 100644 --- a/arch/arm/boot/dts/sun5i-r8.dtsi +++ b/arch/arm/boot/dts/sun5i-r8.dtsi @@ -51,9 +51,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>, <&de_be_clk>, - <&tcon_ch1_clk>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>, + <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>; status = "disabled"; }; }; @@ -62,8 +62,8 @@ tve0: tv-encoder@01c0a000 { compatible = "allwinner,sun4i-a10-tv-encoder"; reg = <0x01c0a000 0x1000>; - clocks = <&ahb_gates 34>; - resets = <&tcon_ch0_clk 0>; + clocks = <&ccu CLK_AHB_TVE>; + resets = <&ccu RST_TVE>; status = "disabled"; port { diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi index 82f87cdcd164..8a4d2277826f 100644 --- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi @@ -130,17 +130,14 @@ &pio { codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PG10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG10"; + function = "gpio_out"; }; mmc0_cd_pin: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; }; ts_power_pin: ts_power_pin { @@ -151,24 +148,20 @@ }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-down; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PG12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG12"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index b0fca4ef4dae..a9574a6cd95c 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -44,9 +44,10 @@ #include "skeleton.dtsi" -#include <dt-bindings/clock/sun4i-a10-pll2.h> +#include <dt-bindings/clock/sun5i-ccu.h> #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/reset/sun5i-ccu.h> / { interrupt-parent = <&intc>; @@ -59,7 +60,7 @@ device_type = "cpu"; compatible = "arm,cortex-a8"; reg = <0x0>; - clocks = <&cpu>; + clocks = <&ccu CLK_CPU>; }; }; @@ -68,291 +69,19 @@ #size-cells = <1>; ranges; - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - osc24M: clk@01c20050 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; + compatible = "fixed-clock"; clock-frequency = <24000000>; clock-output-names = "osc24M"; }; - osc3M: osc3M_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "osc3M"; - }; - osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; clock-output-names = "osc32k"; }; - - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll2: clk@01c20008 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-pll2-clk"; - reg = <0x01c20008 0x8>; - clocks = <&osc24M>; - clock-output-names = "pll2-1x", "pll2-2x", - "pll2-4x", "pll2-8x"; - }; - - pll3: clk@01c20010 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20010 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll3"; - }; - - pll3x2: pll3x2_clk { - compatible = "allwinner,sun4i-a10-pll3-2x-clk", "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll3>; - clock-output-names = "pll3-2x"; - }; - - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - - pll7: clk@01c20030 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20030 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll7"; - }; - - pll7x2: pll7x2_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll7>; - clock-output-names = "pll7-2x"; - }; - - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb: ahb@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>, <&cpu>, <&pll6 1>; - clock-output-names = "ahb"; - /* - * Use PLL6 as parent, instead of CPU/AXI - * which has rate changes due to cpufreq - */ - assigned-clocks = <&ahb>; - assigned-clock-parents = <&pll6 1>; - }; - - apb0: apb0@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; - clock-output-names = "apb0"; - }; - - apb1: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1"; - }; - - axi_gates: clk@01c2005c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-axi-gates-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&axi>; - clock-indices = <0>; - clock-output-names = "axi_dram"; - }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "nand"; - }; - - ms_clk: clk@01c20084 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20084 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ms"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - ts_clk: clk@01c20098 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20098 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ts"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi2"; - }; - - ir0_clk: clk@01c200b0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_phy"; - }; - - codec_clk: clk@01c20140 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-codec-clk"; - reg = <0x01c20140 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "codec"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mbus"; - }; }; soc@01c00000 { @@ -395,7 +124,7 @@ compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; interrupts = <27>; - clocks = <&ahb_gates 6>; + clocks = <&ccu CLK_AHB_DMA>; #dma-cells = <2>; }; @@ -403,7 +132,7 @@ compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; - clocks = <&ahb_gates 20>, <&spi0_clk>; + clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 27>, <&dma SUN4I_DMA_DEDICATED 26>; @@ -417,7 +146,7 @@ compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c06000 0x1000>; interrupts = <11>; - clocks = <&ahb_gates 21>, <&spi1_clk>; + clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 9>, <&dma SUN4I_DMA_DEDICATED 8>; @@ -430,14 +159,8 @@ mmc0: mmc@01c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; interrupts = <32>; status = "disabled"; #address-cells = <1>; @@ -447,14 +170,8 @@ mmc1: mmc@01c10000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ahb_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; interrupts = <33>; status = "disabled"; #address-cells = <1>; @@ -464,14 +181,8 @@ mmc2: mmc@01c11000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; interrupts = <34>; status = "disabled"; #address-cells = <1>; @@ -481,7 +192,7 @@ usb_otg: usb@01c13000 { compatible = "allwinner,sun4i-a10-musb"; reg = <0x01c13000 0x0400>; - clocks = <&ahb_gates 0>; + clocks = <&ccu CLK_AHB_OTG>; interrupts = <38>; interrupt-names = "mc"; phys = <&usbphy 0>; @@ -496,9 +207,9 @@ compatible = "allwinner,sun5i-a13-usb-phy"; reg = <0x01c13400 0x10 0x01c14800 0x4>; reg-names = "phy_ctrl", "pmu1"; - clocks = <&usb_clk 8>; + clocks = <&ccu CLK_USB_PHY0>; clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>; + resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>; reset-names = "usb0_reset", "usb1_reset"; status = "disabled"; }; @@ -507,7 +218,7 @@ compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; interrupts = <39>; - clocks = <&ahb_gates 1>; + clocks = <&ccu CLK_AHB_EHCI>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; @@ -517,7 +228,7 @@ compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; interrupts = <40>; - clocks = <&usb_clk 6>, <&ahb_gates 2>; + clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; @@ -527,7 +238,7 @@ compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; interrupts = <12>; - clocks = <&ahb_gates 22>, <&spi2_clk>; + clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 29>, <&dma SUN4I_DMA_DEDICATED 28>; @@ -537,6 +248,14 @@ #size-cells = <0>; }; + ccu: clock@01c20000 { + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + intc: interrupt-controller@01c20400 { compatible = "allwinner,sun4i-a10-ic"; reg = <0x01c20400 0x400>; @@ -547,7 +266,7 @@ pio: pinctrl@01c20800 { reg = <0x01c20800 0x400>; interrupts = <28>; - clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -555,86 +274,76 @@ #gpio-cells = <3>; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB0", "PB1"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB15", "PB16"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB15", "PB16"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB17", "PB18"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB17", "PB18"; + function = "i2c2"; }; lcd_rgb565_pins: lcd_rgb565@0 { - allwinner,pins = "PD3", "PD4", "PD5", "PD6", "PD7", + pins = "PD3", "PD4", "PD5", "PD6", "PD7", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD19", "PD20", "PD21", "PD22", "PD23", "PD24", "PD25", "PD26", "PD27"; - allwinner,function = "lcd0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "lcd0"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", "PF3", - "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc2_pins_a: mmc2@0 { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", - "PC10", "PC11", "PC12", "PC13", - "PC14", "PC15"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", "PC13", + "PC14", "PC15"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_4bit_pins_a: mmc2-4bit@0 { + pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; spi2_pins_a: spi2@0 { - allwinner,pins = "PE1", "PE2", "PE3"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE1", "PE2", "PE3"; + function = "spi2"; }; spi2_cs0_pins_a: spi2-cs0@0 { - allwinner,pins = "PE0"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE0"; + function = "spi2"; }; uart3_pins_a: uart3@0 { - allwinner,pins = "PG9", "PG10"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG9", "PG10"; + function = "uart3"; }; uart3_pins_cts_rts_a: uart3-cts-rts@0 { - allwinner,pins = "PG11", "PG12"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG11", "PG12"; + function = "uart3"; }; pwm0_pins: pwm0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "pwm"; }; }; @@ -642,7 +351,7 @@ compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; interrupts = <22>; - clocks = <&osc24M>; + clocks = <&ccu CLK_HOSC>; }; wdt: watchdog@01c20c90 { @@ -662,7 +371,7 @@ compatible = "allwinner,sun4i-a10-codec"; reg = <0x01c22c00 0x40>; interrupts = <30>; - clocks = <&apb0_gates 0>, <&codec_clk>; + clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; clock-names = "apb", "codec"; dmas = <&dma SUN4I_DMA_NORMAL 19>, <&dma SUN4I_DMA_NORMAL 19>; @@ -688,7 +397,7 @@ interrupts = <2>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 17>; + clocks = <&ccu CLK_APB1_UART1>; status = "disabled"; }; @@ -698,7 +407,7 @@ interrupts = <4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 19>; + clocks = <&ccu CLK_APB1_UART3>; status = "disabled"; }; @@ -706,7 +415,7 @@ compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; - clocks = <&apb1_gates 0>; + clocks = <&ccu CLK_APB1_I2C0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -716,7 +425,7 @@ compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; - clocks = <&apb1_gates 1>; + clocks = <&ccu CLK_APB1_I2C1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -726,7 +435,7 @@ compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; - clocks = <&apb1_gates 2>; + clocks = <&ccu CLK_APB1_I2C2>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -736,7 +445,7 @@ compatible = "allwinner,sun5i-a13-hstimer"; reg = <0x01c60000 0x1000>; interrupts = <82>, <83>; - clocks = <&ahb_gates 28>; + clocks = <&ccu CLK_AHB_HSTIMER>; }; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts index 2f8cfab771e2..effbdc766938 100644 --- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts @@ -68,10 +68,8 @@ &pio { usb1_vbus_pin_a: usb1_vbus_pin@0 { - allwinner,pins = "PH27"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH27"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index f9cf36888d93..f5ececd45bc0 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -124,29 +124,25 @@ }; &mmc0_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &pio { mmc0_cd_pin_colombus: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; usb2_vbus_pin_colombus: usb2_vbus_pin@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24"; + function = "gpio_out"; }; i2c_lcd_pins: i2c_lcd_pin@0 { - allwinner,pins = "PA23", "PA24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA23", "PA24"; + function = "gpio_out"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 735914f6ae44..f094eeb6c499 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -140,6 +140,10 @@ cpu-supply = <®_dcdc3>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -201,7 +205,7 @@ &mmc0_pins_a { /* external pull-ups missing for some pins */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &mmc1 { @@ -220,24 +224,19 @@ &pio { gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 { - allwinner,pins = "PA21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA21"; + function = "gpio_out"; }; mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; wifi_reset_pin_hummingbird: wifi_reset_pin@0 { - allwinner,pins = "PG10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG10"; + function = "gpio_out"; }; }; @@ -249,6 +248,7 @@ reg = <0x68>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; }; }; @@ -307,6 +307,11 @@ regulator-name = "vcc-dram"; }; +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + ®_usb1_vbus { gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ status = "okay"; @@ -331,12 +336,25 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usb1_vbus_pin_a { /* different pin from sunxi-common-regulators */ - allwinner,pins = "PH24"; + pins = "PH24"; }; &usbphy { + usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts index e9185dad67ee..2bc57d2dcd80 100644 --- a/arch/arm/boot/dts/sun6i-a31-i7.dts +++ b/arch/arm/boot/dts/sun6i-a31-i7.dts @@ -69,6 +69,29 @@ gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; }; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; +}; + +&codec { + allwinner,audio-routing = + "Headphone", "HP"; + status = "okay"; }; &ehci0 { @@ -109,24 +132,19 @@ &pio { led_pins_i7: led_pins@0 { - allwinner,pins = "PH13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH13"; + function = "gpio_out"; }; mmc0_cd_pin_i7: mmc0_cd_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH22"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_i7: usb1_vbus_pin@0 { - allwinner,pins = "PC27"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC27"; + function = "gpio_out"; }; }; @@ -137,6 +155,13 @@ status = "okay"; }; +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_pins_a>; + spdif-out = "okay"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 29016a13a2c1..8af5b667a46d 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -128,24 +128,19 @@ &pio { led_pins_m9: led_pins@0 { - allwinner,pins = "PH13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH13"; + function = "gpio_out"; }; mmc0_cd_pin_m9: mmc0_cd_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH22"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_m9: usb1_vbus_pin@0 { - allwinner,pins = "PC27"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC27"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts index 5faeae429e2a..bf0f5831126f 100644 --- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts @@ -128,24 +128,19 @@ &pio { led_pins_m9: led_pins@0 { - allwinner,pins = "PH13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH13"; + function = "gpio_out"; }; mmc0_cd_pin_m9: mmc0_cd_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH22"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_m9: usb1_vbus_pin@0 { - allwinner,pins = "PC27"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC27"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 2b26175d55d1..a4b96184cac1 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -234,6 +234,7 @@ de: display-engine { compatible = "allwinner,sun6i-a31-display-engine"; allwinner,pipelines = <&fe0>; + status = "disabled"; }; soc@01c00000 { @@ -479,130 +480,121 @@ #gpio-cells = <3>; gmac_pins_gmii_a: gmac_gmii@0 { - allwinner,pins = "PA0", "PA1", "PA2", "PA3", + pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PA16", "PA17", "PA18", "PA19", "PA20", "PA21", "PA22", "PA23", "PA24", "PA25", "PA26", "PA27"; - allwinner,function = "gmac"; + function = "gmac"; /* * data lines in GMII mode run at 125MHz and * might need a higher signal drive strength */ - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + drive-strength = <30>; }; gmac_pins_mii_a: gmac_mii@0 { - allwinner,pins = "PA0", "PA1", "PA2", "PA3", + pins = "PA0", "PA1", "PA2", "PA3", "PA8", "PA9", "PA11", "PA12", "PA13", "PA14", "PA19", "PA20", "PA21", "PA22", "PA23", "PA24", "PA26", "PA27"; - allwinner,function = "gmac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "gmac"; }; gmac_pins_rgmii_a: gmac_rgmii@0 { - allwinner,pins = "PA0", "PA1", "PA2", "PA3", + pins = "PA0", "PA1", "PA2", "PA3", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA19", "PA20", "PA25", "PA26", "PA27"; - allwinner,function = "gmac"; + function = "gmac"; /* * data lines in RGMII mode use DDR mode * and need a higher signal drive strength */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + drive-strength = <40>; }; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PH14", "PH15"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH14", "PH15"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PH16", "PH17"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH16", "PH17"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PH18", "PH19"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH18", "PH19"; + function = "i2c2"; }; lcd0_rgb888_pins: lcd0_rgb888 { - allwinner,pins = "PD0", "PD1", "PD2", "PD3", + pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD16", "PD17", "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", "PD24", "PD25", "PD26", "PD27"; - allwinner,function = "lcd0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "lcd0"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", + pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG0", "PG1", "PG2", "PG3", + pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; }; mmc2_pins_a: mmc2@0 { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", + pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; mmc2_8bit_emmc_pins: mmc2@1 { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", + pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PC24"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; mmc3_8bit_emmc_pins: mmc3@1 { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", + pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PC24"; - allwinner,function = "mmc3"; - allwinner,drive = <SUN4I_PINCTRL_40_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc3"; + drive-strength = <40>; + bias-pull-up; + }; + + spdif_pins_a: spdif@0 { + pins = "PH28"; + function = "spdif"; }; uart0_pins_a: uart0@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH20", "PH21"; + function = "uart0"; }; }; @@ -622,6 +614,19 @@ reg = <0x01c20ca0 0x20>; }; + spdif: spdif@01c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-spdif"; + reg = <0x01c21000 0x400>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1_SPDIF>, <&ccu CLK_SPDIF>; + resets = <&ccu RST_APB1_SPDIF>; + clock-names = "apb", "spdif"; + dmas = <&dma 2>, <&dma 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + lradc: lradc@01c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; @@ -861,7 +866,7 @@ gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; @@ -1075,17 +1080,13 @@ #gpio-cells = <3>; ir_pins_a: ir@0 { - allwinner,pins = "PL4"; - allwinner,function = "s_ir"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL4"; + function = "s_ir"; }; p2wi_pins: p2wi { - allwinner,pins = "PL0", "PL1"; - allwinner,function = "s_p2wi"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL0", "PL1"; + function = "s_p2wi"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 73c133f5e79c..2238eda318f6 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -134,24 +134,20 @@ &pio { gt911_int_primo81: gt911_int_pin@0 { - allwinner,pins = "PA3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA3"; + function = "gpio_in"; }; mma8452_int_primo81: mma8452_int_pin@0 { - allwinner,pins = "PA9"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA9"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_primo81: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts index c35ec112f5a0..7ff68bdd7109 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts @@ -136,17 +136,14 @@ &pio { led_pin_sina31s: led_pin@0 { - allwinner,pins = "PH13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH13"; + function = "gpio_out"; }; mmc0_cd_pin_sina31s: mmc0_cd_pin@0 { - allwinner,pins = "PA4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA4"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -156,6 +153,11 @@ regulator-name = "vcc-gmac-phy"; }; +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + &usbphy { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index db7fa13f5425..3bd862bf82a9 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -122,7 +122,7 @@ }; &mmc0_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &mmc2 { @@ -144,7 +144,7 @@ }; &mmc2_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &ohci0 { @@ -153,33 +153,26 @@ &pio { gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 { - allwinner,pins = "PA21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA21"; + function = "gpio_out"; }; led_pins_bpi_m2: led_pins@0 { - allwinner,pins = "PG5", "PG10", "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG5", "PG10", "PG11"; + function = "gpio_out"; }; mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 { - allwinner,pins = "PA4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA4"; + function = "gpio_in"; + bias-pull-up; }; }; &r_pio { mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 { - allwinner,pins = "PL8"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL8"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index d6ad6196a768..154ebf5082ed 100644 --- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -92,10 +92,9 @@ &pio { mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -110,7 +109,7 @@ }; &mmc0_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &p2wi { diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi index 0c434304e040..edaba5f904fd 100644 --- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi @@ -77,17 +77,15 @@ &pio { mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA15"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index 532f1a160560..08e776ae095a 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -183,7 +183,7 @@ &mmc3_pins_a { /* AP6210 requires pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &ohci0 { @@ -200,31 +200,24 @@ &pio { gmac_power_pin_bpi_m1p: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH23"; + function = "gpio_out"; }; led_pins_bpi_m1p: led_pins@0 { - allwinner,pins = "PH24", "PH25"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24", "PH25"; + function = "gpio_out"; }; mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; mmc3_pwrseq_pin_bpi_m1p: mmc3_pwrseq_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH22"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 67c8a7644b99..91f2e5f9efcb 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -179,31 +179,25 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; gmac_power_pin_bananapi: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH23"; + function = "gpio_out"; }; led_pins_bananapi: led_pins@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts index 18fcc87f4621..83516bc81225 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -76,6 +76,13 @@ }; }; + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc3_pin_bananapro>; + reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; + }; + reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -87,23 +94,16 @@ enable-active-high; gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; }; - - reg_vmmc3: vmmc3 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&vmmc3_pin_bananapro>; - regulator-name = "vmmc3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; - }; }; &ahci { status = "okay"; }; +&codec { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -166,10 +166,19 @@ &mmc3 { pinctrl-names = "default"; pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; }; &ohci0 { @@ -182,45 +191,34 @@ &pio { gmac_power_pin_bananapro: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH23"; + function = "gpio_out"; }; led_pins_bananapro: led_pins@0 { - allwinner,pins = "PH24", "PG2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24", "PG2"; + function = "gpio_out"; }; mmc0_cd_pin_bananapro: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - allwinner,pins = "PH0"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH0"; + function = "gpio_out"; }; usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH1"; + function = "gpio_out"; }; vmmc3_pin_bananapro: vmmc3_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH22"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 1fa832d7b469..4dc1e10f88c4 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -160,17 +160,14 @@ &pio { led_pins_cubieboard2: led_pins@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH20", "PH21"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 83f39b0362cb..f019aa3fe96d 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -207,7 +207,7 @@ &mmc3_pins_a { /* AP6210 requires pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &ohci0 { @@ -224,45 +224,33 @@ &pio { ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12"; + function = "gpio_out"; }; led_pins_cubietruck: led_pins@0 { - allwinner,pins = "PH7", "PH11", "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH7", "PH11", "PH20", "PH21"; + function = "gpio_out"; }; mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 { - allwinner,pins = "PH9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH9"; + function = "gpio_out"; }; usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PH17"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH17"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH19"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH19"; + function = "gpio_in"; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH22"; + function = "gpio_in"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index 37f4a5497452..e921ba42f170 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -188,31 +188,23 @@ &pio { ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15"; + function = "gpio_out"; }; usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; }; mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 { - allwinner,pins = "PH9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH9"; + function = "gpio_out"; }; gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 { - allwinner,pins = "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH16"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 1e6bd360dac0..385fd8232ae0 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -185,7 +185,7 @@ &mmc3_pins_a { /* AP6210 / AP6330 requires pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &ohci0 { @@ -198,31 +198,23 @@ &pio { vmmc3_pin_i12_tvbox: vmmc3_pin@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; }; vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12"; + function = "gpio_out"; }; gmac_power_pin_i12_tvbox: gmac_power_pin@0 { - allwinner,pins = "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH21"; + function = "gpio_out"; }; led_pins_i12_tvbox: led_pins@0 { - allwinner,pins = "PH9", "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH9", "PH20"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts index 10d48cbf81ff..d52222c82cb8 100644 --- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts +++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts @@ -131,10 +131,9 @@ &pio { led_pins_itead_core: led_pins@0 { - allwinner,pins = "PH20","PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH20","PH21"; + function = "gpio_out"; + drive-strength = <20>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index 73c05dab0a69..72ec0d5ae052 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -87,7 +87,7 @@ }; &ahci_pwr_pin_a { - allwinner,pins = "PB3"; + pins = "PB3"; }; &ahci { @@ -222,31 +222,25 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; gmac_power_pin_lamobo_r1: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH23"; + function = "gpio_out"; }; led_pins_lamobo_r1: led_pins@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24"; + function = "gpio_out"; }; }; @@ -327,7 +321,7 @@ }; &usb2_vbus_pin_a { - allwinner,pins = "PH12"; + pins = "PH12"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index 8d9ea48dd98c..0e074bd0e8c9 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -145,10 +145,8 @@ &pio { led_pins_m3: led_pins@0 { - allwinner,pins = "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH20"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts index 90ff4a267025..97d7a8b65a03 100644 --- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts +++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts @@ -132,17 +132,13 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH4"; + function = "gpio_in"; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH5"; + function = "gpio_in"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index 134e0c1b129d..a1450c10b08e 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -120,6 +120,18 @@ }; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + &lradc { vref-supply = <®_vcc3v0>; status = "okay"; @@ -208,38 +220,30 @@ &pio { ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC3"; + function = "gpio_out"; }; led_pins_olimex_som_evb: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 { - allwinner,pins = "PH0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH0"; + function = "gpio_in"; + bias-pull-up; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH4"; + function = "gpio_in"; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH5"; + function = "gpio_in"; }; }; @@ -288,12 +292,38 @@ status = "okay"; }; +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>, + <&spi1_cs0_pins_a>; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>, + <&spi2_cs0_pins_a>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&uart6_pins_a>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + &usb_otg { dr_mode = "otg"; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 35ad7006c53c..1297432c2802 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -153,31 +153,26 @@ &pio { ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC3"; + function = "gpio_out"; }; led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts index 5ea4915f6d75..81f376f2a44d 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts @@ -56,11 +56,9 @@ }; &pio { - mmc2_pins_nrst: mmc2@0 { - allwinner,pins = "PC16"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + mmc2_pins_nrst: mmc2-rst-pin { + pins = "PC16"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index d5c796c8d16f..71cca5360728 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -112,57 +112,9 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; - - acin-supply = <®_axp_ipsout>; - vin2-supply = <®_axp_ipsout>; - vin3-supply = <®_axp_ipsout>; - ldo24in-supply = <®_axp_ipsout>; - ldo3in-supply = <®_axp_ipsout>; - - regulators { - vdd_rtc: ldo1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - }; - - avcc: ldo2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vcc_csi0: ldo3 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <3500000>; - regulator-always-on; - }; - - vcc_csi1: ldo4 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_cpu: dcdc2 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <2275000>; - regulator-always-on; - }; - - vdd_int: dcdc3 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <3500000>; - regulator-always-on; - }; - }; }; }; @@ -202,38 +154,31 @@ &pio { ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC3"; + function = "gpio_out"; }; led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; usb0_vbus_pin_lime2: usb0_vbus_pin@0 { - allwinner,pins = "PC17"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC17"; + function = "gpio_out"; }; }; @@ -243,6 +188,48 @@ status = "okay"; }; +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-always-on; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vddio-csi0"; +}; + +®_ldo4 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vddio-csi1"; +}; + ®_usb0_vbus { pinctrl-0 = <&usb0_vbus_pin_lime2>; gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 7e3006f6a775..223fbd9f7c62 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -227,31 +227,27 @@ &pio { mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { - allwinner,pins = "PH11"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH11"; + function = "gpio_in"; + bias-pull-up; }; led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts index 2be04c438b1e..a74265749227 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -166,52 +166,41 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; mmc3_cd_pin_orangepi: mmc3_cd_pin@0 { - allwinner,pins = "PH11"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH11"; + function = "gpio_in"; + bias-pull-up; }; usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH22"; + function = "gpio_out"; }; gmac_power_pin_orangepi: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH23"; + function = "gpio_out"; }; led_pins_orangepi: led_pins@0 { - allwinner,pins = "PH24", "PH25"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24", "PH25"; + function = "gpio_out"; }; usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - allwinner,pins = "PH26"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH26"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts index 71125bf64575..3de980c8f8ff 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -147,45 +147,35 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH22"; + function = "gpio_out"; }; gmac_power_pin_orangepi: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH23"; + function = "gpio_out"; }; led_pins_orangepi: led_pins@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24"; + function = "gpio_out"; }; usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - allwinner,pins = "PH26"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH26"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index ddac7328b852..f47a5c46bc20 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -152,31 +152,24 @@ &pio { ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; }; led_pins_pcduino3_nano: led_pins@0 { - allwinner,pins = "PH16", "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH16", "PH15"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 { - allwinner,pins = "PD2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PD2"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 1a8b39be1d61..4599f98a3aee 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -108,7 +108,7 @@ }; &ahci_pwr_pin_a { - allwinner,pins = "PH2"; + pins = "PH2"; }; &codec { @@ -183,24 +183,19 @@ &pio { led_pins_pcduino3: led_pins@0 { - allwinner,pins = "PH15", "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15", "PH16"; + function = "gpio_out"; }; key_pins_pcduino3: key_pins@0 { - allwinner,pins = "PH17", "PH18", "PH19"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH17", "PH18", "PH19"; + function = "gpio_in"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index 2f6b21adddd9..e19f17177755 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -173,31 +173,24 @@ &pio { bl_enable_pin: bl_enable_pin@0 { - allwinner,pins = "PH7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH7"; + function = "gpio_out"; }; codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15"; + function = "gpio_out"; }; ts_reset_pin: ts_reset_pin@0 { - allwinner,pins = "PB13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB13"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts index dc31d476ef81..c3078d4f1093 100644 --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -160,17 +160,14 @@ &pio { vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 { - allwinner,pins = "PH9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH9"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index f7db067b0de0..2db97fc820dd 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -871,6 +871,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + num-cs = <4>; }; spi1: spi@01c06000 { @@ -885,6 +886,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + num-cs = <1>; }; emac: ethernet@01c0b000 { @@ -1037,6 +1039,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + num-cs = <1>; }; ahci: sata@01c18000 { @@ -1079,6 +1082,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + num-cs = <1>; }; pio: pinctrl@01c20800 { @@ -1093,302 +1097,231 @@ #gpio-cells = <3>; clk_out_a_pins_a: clk_out_a@0 { - allwinner,pins = "PI12"; - allwinner,function = "clk_out_a"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI12"; + function = "clk_out_a"; }; clk_out_b_pins_a: clk_out_b@0 { - allwinner,pins = "PI13"; - allwinner,function = "clk_out_b"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI13"; + function = "clk_out_b"; }; emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "emac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + function = "emac"; }; gmac_pins_mii_a: gmac_mii@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "gmac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + function = "gmac"; }; gmac_pins_rgmii_a: gmac_rgmii@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA10", - "PA11", "PA12", "PA13", - "PA15", "PA16"; - allwinner,function = "gmac"; + pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA10", + "PA11", "PA12", "PA13", + "PA15", "PA16"; + function = "gmac"; /* * data lines in RGMII mode use DDR mode * and need a higher signal drive strength */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + drive-strength = <40>; }; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB0", "PB1"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB18", "PB19"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB18", "PB19"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB20", "PB21"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB20", "PB21"; + function = "i2c2"; }; i2c3_pins_a: i2c3@0 { - allwinner,pins = "PI0", "PI1"; - allwinner,function = "i2c3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI0", "PI1"; + function = "i2c3"; }; ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB4"; + function = "ir0"; }; ir0_tx_pins_a: ir0@1 { - allwinner,pins = "PB3"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB3"; + function = "ir0"; }; ir1_rx_pins_a: ir1@0 { - allwinner,pins = "PB23"; - allwinner,function = "ir1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB23"; + function = "ir1"; }; ir1_tx_pins_a: ir1@1 { - allwinner,pins = "PB22"; - allwinner,function = "ir1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB22"; + function = "ir1"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", - "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH1"; + function = "gpio_in"; + bias-pull-up; }; mmc2_pins_a: mmc2@0 { - allwinner,pins = "PC6", "PC7", "PC8", - "PC9", "PC10", "PC11"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PC6", "PC7", "PC8", + "PC9", "PC10", "PC11"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; mmc3_pins_a: mmc3@0 { - allwinner,pins = "PI4", "PI5", "PI6", - "PI7", "PI8", "PI9"; - allwinner,function = "mmc3"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI4", "PI5", "PI6", + "PI7", "PI8", "PI9"; + function = "mmc3"; + drive-strength = <30>; + bias-pull-up; }; ps20_pins_a: ps20@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "ps2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI20", "PI21"; + function = "ps2"; }; ps21_pins_a: ps21@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "ps2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12", "PH13"; + function = "ps2"; }; pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "pwm"; }; pwm1_pins_a: pwm1@0 { - allwinner,pins = "PI3"; - allwinner,function = "pwm"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI3"; + function = "pwm"; }; spdif_tx_pins_a: spdif@0 { - allwinner,pins = "PB13"; - allwinner,function = "spdif"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB13"; + function = "spdif"; + bias-pull-up; }; spi0_pins_a: spi0@0 { - allwinner,pins = "PI11", "PI12", "PI13"; - allwinner,function = "spi0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI11", "PI12", "PI13"; + function = "spi0"; }; spi0_cs0_pins_a: spi0_cs0@0 { - allwinner,pins = "PI10"; - allwinner,function = "spi0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI10"; + function = "spi0"; }; spi0_cs1_pins_a: spi0_cs1@0 { - allwinner,pins = "PI14"; - allwinner,function = "spi0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI14"; + function = "spi0"; }; spi1_pins_a: spi1@0 { - allwinner,pins = "PI17", "PI18", "PI19"; - allwinner,function = "spi1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI17", "PI18", "PI19"; + function = "spi1"; }; spi1_cs0_pins_a: spi1_cs0@0 { - allwinner,pins = "PI16"; - allwinner,function = "spi1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI16"; + function = "spi1"; }; spi2_pins_a: spi2@0 { - allwinner,pins = "PC20", "PC21", "PC22"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC20", "PC21", "PC22"; + function = "spi2"; }; spi2_pins_b: spi2@1 { - allwinner,pins = "PB15", "PB16", "PB17"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB15", "PB16", "PB17"; + function = "spi2"; }; spi2_cs0_pins_a: spi2_cs0@0 { - allwinner,pins = "PC19"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC19"; + function = "spi2"; }; spi2_cs0_pins_b: spi2_cs0@1 { - allwinner,pins = "PB14"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB14"; + function = "spi2"; }; uart0_pins_a: uart0@0 { - allwinner,pins = "PB22", "PB23"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB22", "PB23"; + function = "uart0"; }; uart2_pins_a: uart2@0 { - allwinner,pins = "PI16", "PI17", "PI18", "PI19"; - allwinner,function = "uart2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI16", "PI17", "PI18", "PI19"; + function = "uart2"; }; uart3_pins_a: uart3@0 { - allwinner,pins = "PG6", "PG7", "PG8", "PG9"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG6", "PG7", "PG8", "PG9"; + function = "uart3"; }; uart3_pins_b: uart3@1 { - allwinner,pins = "PH0", "PH1"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH0", "PH1"; + function = "uart3"; }; uart4_pins_a: uart4@0 { - allwinner,pins = "PG10", "PG11"; - allwinner,function = "uart4"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG10", "PG11"; + function = "uart4"; }; uart4_pins_b: uart4@1 { - allwinner,pins = "PH4", "PH5"; - allwinner,function = "uart4"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH4", "PH5"; + function = "uart4"; }; uart5_pins_a: uart5@0 { - allwinner,pins = "PI10", "PI11"; - allwinner,function = "uart5"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI10", "PI11"; + function = "uart5"; }; uart6_pins_a: uart6@0 { - allwinner,pins = "PI12", "PI13"; - allwinner,function = "uart6"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI12", "PI13"; + function = "uart6"; }; uart7_pins_a: uart7@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "uart7"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI20", "PI21"; + function = "uart7"; }; }; @@ -1686,9 +1619,9 @@ }; gic: interrupt-controller@01c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index e4991a78ad73..a952cc0703cc 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -84,7 +84,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; @@ -106,14 +106,16 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-accuracy = <50000>; clock-output-names = "osc24M"; }; - osc32k: osc32k_clk { + ext_osc32k: ext_osc32k_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; + clock-accuracy = <50000>; + clock-output-names = "ext-osc32k"; }; }; @@ -256,7 +258,7 @@ ccu: clock@01c20000 { reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -266,7 +268,7 @@ /* compatible gets set in SoC specific dtsi file */ reg = <0x01c20800 0x400>; /* interrupts get set in SoC specific dtsi file */ - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -274,88 +276,72 @@ #gpio-cells = <3>; uart0_pins_a: uart0@0 { - allwinner,pins = "PF2", "PF4"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF2", "PF4"; + function = "uart0"; }; uart1_pins_a: uart1@0 { - allwinner,pins = "PG6", "PG7"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG6", "PG7"; + function = "uart1"; }; uart1_pins_cts_rts_a: uart1-cts-rts@0 { - allwinner,pins = "PG8", "PG9"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG8", "PG9"; + function = "uart1"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", - "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG0", "PG1", "PG2", - "PG3", "PG4", "PG5"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG0", "PG1", "PG2", + "PG3", "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; }; mmc2_8bit_pins: mmc2_8bit { - allwinner,pins = "PC5", "PC6", "PC8", - "PC9", "PC10", "PC11", - "PC12", "PC13", "PC14", - "PC15", "PC16"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC5", "PC6", "PC8", + "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", + "PC15", "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; pwm0_pins: pwm0 { - allwinner,pins = "PH0"; - allwinner,function = "pwm0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH0"; + function = "pwm0"; }; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PH2", "PH3"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2", "PH3"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PH4", "PH5"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH4", "PH5"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PE12", "PE13"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE12", "PE13"; + function = "i2c2"; }; lcd_rgb666_pins: lcd-rgb666@0 { - allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", - "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", - "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", - "PD24", "PD25", "PD26", "PD27"; - allwinner,function = "lcd0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; }; }; @@ -486,10 +472,36 @@ #size-cells = <0>; }; + mali: gpu@1c40000 { + compatible = "allwinner,sun8i-a23-mali", + "allwinner,sun7i-a20-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pmu"; + clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_BUS_GPU>; + + assigned-clocks = <&ccu CLK_GPU>; + assigned-clock-rates = <408000000>; + }; + gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; @@ -502,6 +514,9 @@ reg = <0x01f00000 0x54>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clock-output-names = "osc32k"; + clocks = <&ext_osc32k>; + #clock-cells = <1>; }; nmi_intc: interrupt-controller@01f00c0c { @@ -554,6 +569,10 @@ compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; }; + + codec_analog: codec-analog { + compatible = "allwinner,sun8i-a23-codec-analog"; + }; }; cpucfg@01f01c00 { @@ -576,7 +595,7 @@ compatible = "allwinner,sun8i-a23-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>; + clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; resets = <&apb0_rst 0>; gpio-controller; @@ -587,17 +606,15 @@ #gpio-cells = <3>; r_rsb_pins: r_rsb { - allwinner,pins = "PL0", "PL1"; - allwinner,function = "s_rsb"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PL0", "PL1"; + function = "s_rsb"; + drive-strength = <20>; + bias-pull-up; }; r_uart_pins_a: r_uart@0 { - allwinner,pins = "PL2", "PL3"; - allwinner,function = "s_uart"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL2", "PL3"; + function = "s_uart"; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-evb.dts b/arch/arm/boot/dts/sun8i-a23-evb.dts index 610786e635fa..c21f5b1b255e 100644 --- a/arch/arm/boot/dts/sun8i-a23-evb.dts +++ b/arch/arm/boot/dts/sun8i-a23-evb.dts @@ -115,10 +115,9 @@ &pio { mmc0_cd_pin_evb: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts index 21bb291b9568..649e31339662 100644 --- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts +++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts @@ -86,15 +86,13 @@ }; &mmc1_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &r_pio { wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 { - allwinner,pins = "PL6"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL6"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts index 9955f85f9147..6b3bcae089f2 100644 --- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts +++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts @@ -79,15 +79,13 @@ }; &mmc1_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &r_pio { wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 { - allwinner,pins = "PL6"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL6"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts index 956320a6cc78..3ab5c0c09d93 100644 --- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts +++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts @@ -48,3 +48,26 @@ model = "Q8 A23 Tablet"; compatible = "allwinner,q8-a23", "allwinner,sun8i-a23"; }; + +&codec { + pinctrl-0 = <&codec_pa_pin>; + allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + allwinner,audio-routing = + "Headphone", "HP", + "Headphone", "HPCOM", + "Speaker", "HP", + "MIC1", "Mic", + "MIC2", "Headset Mic", + "Mic", "MBIAS", + "Headset Mic", "HBIAS"; + status = "okay"; +}; + +&pio { + codec_pa_pin: codec_pa_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 54d045dab825..4d1f929780a8 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -48,6 +48,22 @@ memory { reg = <0x40000000 0x40000000>; }; + + soc@01c00000 { + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-a23-codec"; + reg = <0x01c22c00 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "apb", "codec"; + resets = <&ccu RST_BUS_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + allwinner,codec-analog-controls = <&codec_analog>; + status = "disabled"; + }; + }; }; &ccu { diff --git a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts index fb4665576dff..3e05959104f1 100644 --- a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts +++ b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts @@ -71,7 +71,7 @@ }; &mmc1_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &mmc1 { @@ -89,10 +89,9 @@ &r_pio { led_pin_d978: led_pin_d978@0 { - allwinner,pins = "PL5"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL5"; + function = "gpio_out"; + drive-strength = <20>; }; }; diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts index 9ea637e82b2d..be9a6b8d7a1e 100644 --- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts +++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts @@ -92,24 +92,18 @@ &pio { led_pin_olinuxino: led_pins@0 { - allwinner,pins = "PB7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB7"; + function = "gpio_out"; }; mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB4"; + function = "gpio_in"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PB3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB3"; + function = "gpio_in"; }; }; @@ -126,7 +120,7 @@ }; }; -#include "axp22x.dtsi" +#include "axp223.dtsi" ®_aldo1 { regulator-always-on; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index 71bb9418c5f9..03b89bdd55ba 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -61,6 +61,35 @@ chosen { stdout-path = "serial0:115200n8"; }; + + panel { + compatible = "netron-dy,e231732"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_panel>; + }; + }; + }; +}; + +&codec { + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&dai { + status = "okay"; }; &ehci0 { @@ -115,9 +144,9 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; + drive-strength = <40>; /* eMMC is missing pull-ups */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &ohci0 { @@ -126,10 +155,9 @@ &pio { mmc0_cd_pin_sina33: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB4"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -145,7 +173,7 @@ }; }; -#include "axp22x.dtsi" +#include "axp223.dtsi" ®_aldo1 { regulator-always-on; @@ -207,6 +235,23 @@ regulator-name = "vcc-rtc"; }; +&sound { + status = "okay"; +}; + +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + status = "okay"; +}; + +&tcon0_out { + tcon0_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_b>; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index fd1e1cddd4a8..18c174fef84f 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -45,7 +45,42 @@ #include "sun8i-a23-a33.dtsi" / { + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp@648000000 { + opp-hz = /bits/ 64 <648000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1200000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1320000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + }; + cpus { + cpu@0 { + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; + }; + cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; @@ -69,6 +104,28 @@ reg = <0x40000000 0x80000000>; }; + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "sun8i-a33-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&link_codec>; + simple-audio-card,bitclock-master = <&link_codec>; + simple-audio-card,mclk-fs = <512>; + simple-audio-card,aux-devs = <&codec_analog>; + simple-audio-card,routing = + "Left DAC", "Digital Left DAC", + "Right DAC", "Digital Right DAC"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&dai>; + }; + + link_codec: simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; + soc@01c00000 { tcon0: lcd-controller@01c0c000 { compatible = "allwinner,sun8i-a33-tcon"; @@ -116,6 +173,29 @@ reset-names = "ahb"; }; + dai: dai@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-i2s"; + reg = <0x01c22c00 0x200>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + codec: codec@01c22e00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-a33-codec"; + reg = <0x01c22e00 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "bus", "mod"; + status = "disabled"; + }; + fe0: display-frontend@01e00000 { compatible = "allwinner,sun8i-a33-display-frontend"; reg = <0x01e00000 0x20000>; @@ -238,10 +318,8 @@ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; uart0_pins_b: uart0@1 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB0", "PB1"; + function = "uart0"; }; }; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index d3473f81b12f..a789a7caf217 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -167,25 +167,21 @@ #gpio-cells = <3>; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", - "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; uart0_pins_a: uart0@0 { - allwinner,pins = "PF2", "PF4"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF2", "PF4"; + function = "uart0"; }; uart0_pins_b: uart0@1 { - allwinner,pins = "PB9", "PB10"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB9", "PB10"; + function = "uart0"; }; }; @@ -217,7 +213,7 @@ gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts new file mode 100644 index 000000000000..b7ca916d871d --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -0,0 +1,160 @@ +/* + * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz> + * + * Based on sun8i-h3-orangepi-one.dts, which is: + * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Xunlong Orange Pi Zero"; + compatible = "xunlong,orangepi-zero", "allwinner,sun8i-h2-plus"; + + aliases { + serial0 = &uart0; + /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet1 = &xr819; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr_led { + label = "orangepi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status_led { + label = "orangepi:red:status"; + gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_vcc_wifi: reg_vcc_wifi { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; + enable-active-high; + gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <200>; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc_wifi>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + /* + * Explicitly define the sdio device, so that we can add an ethernet + * alias for it (which e.g. makes u-boot set a mac-address). + */ + xr819: sdio_wifi@1 { + reg = <1>; + }; +}; + +&mmc1_pins_a { + bias-pull-up; +}; + +&ohci1 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +&usbphy { + /* USB VBUS is always on */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts index 06fddaae8edd..c0c49dd4d3b2 100644 --- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts @@ -156,24 +156,18 @@ &r_pio { pwr_led_bpi_m2p: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL10"; + function = "gpio_out"; }; sw_r_bpi_m2p: key_pins@0 { - allwinner,pins = "PL3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL3"; + function = "gpio_in"; }; wifi_en_bpi_m2p: wifi_en_pin { - allwinner,pins = "PL7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL7"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts new file mode 100644 index 000000000000..25b225b7dfd6 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -0,0 +1,160 @@ +/* + * Copyright (C) 2017 Marcus Cooper <codekipper@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Beelink X2"; + compatible = "roofull,beelink-x2", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet1 = &sdiowifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "beelink-x2:blue:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + + red { + label = "beelink-x2:red:standby"; + gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + }; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; + + sound_spdif { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; + + /* + * Explicitly define the sdio device, so that we can add an ethernet + * alias for it (which e.g. makes u-boot set a mac-address). + */ + sdiowifi: sdio_wifi@1 { + reg = <1>; + }; +}; + +&ohci1 { + status = "okay"; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + /* USB VBUS is on as long as VCC-IO is on */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi index 8038aa29a5a7..2216e68d1838 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi @@ -110,26 +110,20 @@ &pio { leds_npi: led_pins@0 { - allwinner,pins = "PA10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA10"; + function = "gpio_out"; }; }; &r_pio { leds_r_npi: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL10"; + function = "gpio_out"; }; sw_r_npi: key_pins@0 { - allwinner,pins = "PL3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL3"; + function = "gpio_in"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts index e5bcaba3e87f..047e9e1c6093 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts @@ -145,33 +145,25 @@ &pio { leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA15"; + function = "gpio_out"; }; }; &r_pio { leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL10"; + function = "gpio_out"; }; sw_r_opc: key_pins@0 { - allwinner,pins = "PL3", "PL4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL3", "PL4"; + function = "gpio_in"; }; wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin@0 { - allwinner,pins = "PL7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL7"; + function = "gpio_out"; }; }; @@ -205,7 +197,7 @@ }; &usb1_vbus_pin_a { - allwinner,pins = "PG13"; + pins = "PG13"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts index 1550fee1ec68..22b99b407019 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts @@ -143,26 +143,20 @@ &pio { leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA15"; + function = "gpio_out"; }; }; &r_pio { leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL10"; + function = "gpio_out"; }; sw_r_opc: key_pins@0 { - allwinner,pins = "PL3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL3"; + function = "gpio_in"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 5c9b5bfa5c21..34da853ee037 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -110,26 +110,20 @@ &pio { leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA15"; + function = "gpio_out"; }; }; &r_pio { leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL10"; + function = "gpio_out"; }; sw_r_opc: key_pins@0 { - allwinner,pins = "PL3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL3"; + function = "gpio_in"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts index 851fd2c2cc8c..8b93f5c781a7 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts @@ -82,7 +82,7 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; + drive-strength = <40>; /* eMMC is missing pull-ups */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index 3ec971285aa3..d43978d3294e 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -90,6 +90,14 @@ }; }; +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -132,26 +140,20 @@ &pio { leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA15"; + function = "gpio_out"; }; }; &r_pio { leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL10"; + function = "gpio_out"; }; sw_r_opc: key_pins@0 { - allwinner,pins = "PL3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL3"; + function = "gpio_in"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index bb585918cf54..8c40ab7bfa72 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -76,17 +76,15 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; + drive-strength = <40>; /* eMMC is missing pull-ups */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &pio { usb3_vbus_pin_a: usb3_vbus_pin@0 { - allwinner,pins = "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG11"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 6c14a6f72820..27780b97c863 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -329,106 +329,90 @@ #interrupt-cells = <3>; i2c0_pins: i2c0 { - allwinner,pins = "PA11", "PA12"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA11", "PA12"; + function = "i2c0"; }; i2c1_pins: i2c1 { - allwinner,pins = "PA18", "PA19"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA18", "PA19"; + function = "i2c1"; }; i2c2_pins: i2c2 { - allwinner,pins = "PE12", "PE13"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE12", "PE13"; + function = "i2c2"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", "PF3", - "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc0_cd_pin: mmc0_cd_pin@0 { - allwinner,pins = "PF6"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PF6"; + function = "gpio_in"; + bias-pull-up; }; mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG0", "PG1", "PG2", "PG3", - "PG4", "PG5"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; }; mmc2_8bit_pins: mmc2_8bit { - allwinner,pins = "PC5", "PC6", "PC8", - "PC9", "PC10", "PC11", - "PC12", "PC13", "PC14", - "PC15", "PC16"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC5", "PC6", "PC8", + "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", + "PC15", "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + spdif_tx_pins_a: spdif@0 { + pins = "PA17"; + function = "spdif"; }; spi0_pins: spi0 { - allwinner,pins = "PC0", "PC1", "PC2", "PC3"; - allwinner,function = "spi0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC0", "PC1", "PC2", "PC3"; + function = "spi0"; }; spi1_pins: spi1 { - allwinner,pins = "PA15", "PA16", "PA14", "PA13"; - allwinner,function = "spi1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA15", "PA16", "PA14", "PA13"; + function = "spi1"; }; uart0_pins_a: uart0@0 { - allwinner,pins = "PA4", "PA5"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA4", "PA5"; + function = "uart0"; }; uart1_pins: uart1 { - allwinner,pins = "PG6", "PG7"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG6", "PG7"; + function = "uart1"; }; uart1_rts_cts_pins: uart1_rts_cts { - allwinner,pins = "PG8", "PG9"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG8", "PG9"; + function = "uart1"; }; uart2_pins: uart2 { - allwinner,pins = "PA0", "PA1"; - allwinner,function = "uart2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA0", "PA1"; + function = "uart2"; }; uart3_pins: uart3 { - allwinner,pins = "PA13", "PA14"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA13", "PA14"; + function = "uart3"; }; }; @@ -478,6 +462,19 @@ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; }; + spdif: spdif@01c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-h3-spdif"; + reg = <0x01c21000 0x400>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; + resets = <&ccu RST_BUS_SPDIF>; + clock-names = "apb", "spdif"; + dmas = <&dma 2>; + dma-names = "tx"; + status = "disabled"; + }; + pwm: pwm@01c21400 { compatible = "allwinner,sun8i-h3-pwm"; reg = <0x01c21400 0x8>; @@ -486,6 +483,20 @@ status = "disabled"; }; + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-h3-codec"; + reg = <0x01c22c00 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "apb", "codec"; + resets = <&ccu RST_BUS_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + allwinner,codec-analog-controls = <&codec_analog>; + status = "disabled"; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -580,7 +591,7 @@ gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; @@ -601,6 +612,11 @@ #reset-cells = <1>; }; + codec_analog: codec-analog@01f015c0 { + compatible = "allwinner,sun8i-h3-codec-analog"; + reg = <0x01f015c0 0x4>; + }; + ir: ir@01f02000 { compatible = "allwinner,sun5i-a13-ir"; clocks = <&apb0_gates 1>, <&ir_clk>; @@ -624,10 +640,8 @@ #interrupt-cells = <3>; ir_pins_a: ir@0 { - allwinner,pins = "PL11"; - allwinner,function = "s_cir_rx"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL11"; + function = "s_cir_rx"; }; }; }; diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 29f837a47771..c676940a96da 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -83,15 +83,14 @@ }; &mmc1_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &r_pio { wifi_pwrseq_pin_q8: wifi_pwrseq_pin@0 { - allwinner,pins = "PL6", "PL7", "PL11"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PL6", "PL7", "PL11"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts index 47553e522982..472c03b7aeab 100644 --- a/arch/arm/boot/dts/sun8i-r16-parrot.dts +++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts @@ -84,6 +84,14 @@ }; +&codec { + status = "okay"; +}; + +&dai { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -149,8 +157,8 @@ }; &mmc2_8bit_pins { - allwinner,drive = <SUN4I_PINCTRL_40_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + drive-strength = <40>; + bias-pull-up; }; &ohci0 { @@ -159,40 +167,32 @@ &pio { mmc0_cd_pin_parrot: mmc0_cd_pin@0 { - allwinner,pins = "PD14"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PD14"; + function = "gpio_in"; + bias-pull-up; }; led_pins_parrot: led_pins@0 { - allwinner,pins = "PE16", "PE17"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE16", "PE17"; + function = "gpio_out"; }; usb0_id_det: usb0_id_detect_pin@0 { - allwinner,pins = "PD10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PD10"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_parrot: usb1_vbus_pin@0 { - allwinner,pins = "PD12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PD12"; + function = "gpio_out"; }; }; &r_pio { wifi_reset_pin_parrot: wifi_reset_pin@0 { - allwinner,pins = "PL6"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL6"; + function = "gpio_out"; }; }; @@ -209,7 +209,7 @@ }; }; -#include "axp22x.dtsi" +#include "axp223.dtsi" ®_aldo1 { regulator-always-on; @@ -325,6 +325,10 @@ status = "okay"; }; +&sound { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_b>; diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi index 69bc0cd26ca7..7097c18ff487 100644 --- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi @@ -94,31 +94,25 @@ &pio { bl_en_pin: bl_en_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH6"; + function = "gpio_in"; }; mmc0_cd_pin: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB4"; + function = "gpio_in"; + bias-pull-up; }; ts_power_pin: ts_power_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH1"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH8"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -136,7 +130,7 @@ }; }; -#include "axp22x.dtsi" +#include "axp223.dtsi" ®_aldo1 { regulator-always-on; @@ -220,6 +214,10 @@ regulator-name = "vcc-rtc"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &r_uart { pinctrl-names = "default"; pinctrl-0 = <&r_uart_pins_a>; diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts new file mode 100644 index 000000000000..387fc2aa546d --- /dev/null +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-v3s.dtsi" +#include "sunxi-common-regulators.dtsi" + +/ { + model = "Lichee Pi Zero"; + compatible = "licheepi,licheepi-zero", "allwinner,sun8i-v3s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + blue_led { + label = "licheepi:blue:usr"; + gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ + }; + + green_led { + label = "licheepi:green:usr"; + gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ + default-state = "on"; + }; + + red_led { + label = "licheepi:red:usr"; + gpios = <&pio 6 2 GPIO_ACTIVE_LOW>; /* PG2 */ + }; + }; +}; + +&mmc0 { + pinctrl-0 = <&mmc0_pins_a>; + pinctrl-names = "default"; + broken-cd; + bus-width = <4>; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi new file mode 100644 index 000000000000..71075969e5e6 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -0,0 +1,309 @@ +/* + * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + clocks = <&ccu 14>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun7i-a20-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ccu 22>, + <&ccu 45>, + <&ccu 47>, + <&ccu 46>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ccu 7>; + reset-names = "ahb"; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun7i-a20-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ccu 23>, + <&ccu 48>, + <&ccu 50>, + <&ccu 49>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ccu 8>; + reset-names = "ahb"; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun7i-a20-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ccu 24>, + <&ccu 51>, + <&ccu 53>, + <&ccu 52>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ccu 9>; + reset-names = "ahb"; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + usb_otg: usb@01c19000 { + compatible = "allwinner,sun8i-h3-musb"; + reg = <0x01c19000 0x0400>; + clocks = <&ccu 29>; + resets = <&ccu 17>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + status = "disabled"; + }; + + usbphy: phy@01c19400 { + compatible = "allwinner,sun8i-v3s-usb-phy"; + reg = <0x01c19400 0x2c>, + <0x01c1a800 0x4>; + reg-names = "phy_ctrl", + "pmu0"; + clocks = <&ccu 56>; + clock-names = "usb0_phy"; + resets = <&ccu 0>; + reset-names = "usb0_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ccu: clock@01c20000 { + compatible = "allwinner,sun8i-v3s-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + rtc: rtc@01c20400 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01c20400 0x54>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + }; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun8i-v3s-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 37>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + i2c0_pins: i2c0 { + pins = "PB6", "PB7"; + function = "i2c0"; + }; + + uart0_pins_a: uart0@0 { + pins = "PB8", "PB9"; + function = "uart0"; + }; + + mmc0_pins_a: mmc0@0 { + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + + wdt0: watchdog@01c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 40>; + resets = <&ccu 49>; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 41>; + resets = <&ccu 50>; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 42>; + resets = <&ccu 51>; + status = "disabled"; + }; + + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 38>; + resets = <&ccu 46>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 39>; + resets = <&ccu 47>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 67b02fe7f11c..9112a200fd5e 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -108,7 +108,7 @@ }; &mmc1_pins { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &mmc2 { @@ -123,7 +123,7 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; + drive-strength = <40>; }; &osc32k { @@ -133,17 +133,14 @@ &pio { led_pins_cubieboard4: led-pins@0 { - allwinner,pins = "PH6", "PH17"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH6", "PH17"; + function = "gpio_out"; }; mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 { - allwinner,pins = "PH18"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH18"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -153,10 +150,8 @@ &r_pio { wifi_en_pin_cubieboard4: wifi_en_pin@0 { - allwinner,pins = "PL2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL2"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 7e036b2be762..0fc3a87f5576 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -150,7 +150,7 @@ }; &mmc1_pins { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &mmc2 { @@ -165,7 +165,7 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; + drive-strength = <40>; }; &ohci0 { @@ -183,31 +183,24 @@ &pio { led_pins_optimus: led-pins@0 { - allwinner,pins = "PH0", "PH1"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH0", "PH1"; + function = "gpio_out"; }; mmc0_cd_pin_optimus: mmc0_cd_pin@0 { - allwinner,pins = "PH18"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH18"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_optimus: usb1_vbus_pin@1 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH4"; + function = "gpio_out"; }; usb3_vbus_pin_optimus: usb3_vbus_pin@1 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH5"; + function = "gpio_out"; }; }; @@ -217,17 +210,13 @@ &r_pio { led_r_pins_optimus: led-pins@1 { - allwinner,pins = "PM15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PM15"; + function = "gpio_out"; }; wifi_en_pin_optimus: wifi_en_pin@0 { - allwinner,pins = "PL2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL2"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 979ad1aacfb1..15b6d122f878 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -48,6 +48,13 @@ #include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/clock/sun9i-a80-ccu.h> +#include <dt-bindings/clock/sun9i-a80-de.h> +#include <dt-bindings/clock/sun9i-a80-usb.h> +#include <dt-bindings/reset/sun9i-a80-ccu.h> +#include <dt-bindings/reset/sun9i-a80-de.h> +#include <dt-bindings/reset/sun9i-a80-usb.h> + / { interrupt-parent = <&gic>; @@ -159,228 +166,13 @@ clock-output-names = "osc32k"; }; - usb_mod_clk: clk@00a08000 { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun9i-a80-usb-mod-clk"; - reg = <0x00a08000 0x4>; - clocks = <&ahb1_gates 1>; - clock-output-names = "usb0_ahb", "usb_ohci0", - "usb1_ahb", "usb_ohci1", - "usb2_ahb", "usb_ohci2"; - }; - - usb_phy_clk: clk@00a08004 { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun9i-a80-usb-phy-clk"; - reg = <0x00a08004 0x4>; - clocks = <&ahb1_gates 1>; - clock-output-names = "usb_phy0", "usb_hsic1_480M", - "usb_phy1", "usb_hsic2_480M", - "usb_phy2", "usb_hsic_12M"; - }; - - pll3: clk@06000008 { - /* placeholder until implemented */ - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-rate = <0>; - clock-output-names = "pll3"; - }; - - pll4: clk@0600000c { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-pll4-clk"; - reg = <0x0600000c 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll12: clk@0600002c { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-pll4-clk"; - reg = <0x0600002c 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll12"; - }; - - gt_clk: clk@0600005c { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-gt-clk"; - reg = <0x0600005c 0x4>; - clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "gt"; - }; - - ahb0: clk@06000060 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-ahb-clk"; - reg = <0x06000060 0x4>; - clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "ahb0"; - }; - - ahb1: clk@06000064 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-ahb-clk"; - reg = <0x06000064 0x4>; - clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "ahb1"; - }; - - ahb2: clk@06000068 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-ahb-clk"; - reg = <0x06000068 0x4>; - clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "ahb2"; - }; - - apb0: clk@06000070 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-apb0-clk"; - reg = <0x06000070 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "apb0"; - }; - - apb1: clk@06000074 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-apb1-clk"; - reg = <0x06000074 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "apb1"; - }; - - cci400_clk: clk@06000078 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-gt-clk"; - reg = <0x06000078 0x4>; - clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "cci400"; - }; - - mmc0_clk: clk@06000410 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-mmc-clk"; - reg = <0x06000410 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "mmc0", "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@06000414 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-mmc-clk"; - reg = <0x06000414 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "mmc1", "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@06000418 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-mmc-clk"; - reg = <0x06000418 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "mmc2", "mmc2_output", - "mmc2_sample"; - }; - - mmc3_clk: clk@0600041c { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-mmc-clk"; - reg = <0x0600041c 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "mmc3", "mmc3_output", - "mmc3_sample"; - }; - - ahb0_gates: clk@06000580 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-ahb0-gates-clk"; - reg = <0x06000580 0x4>; - clocks = <&ahb0>; - clock-indices = <0>, <1>, <3>, - <5>, <8>, <12>, - <13>, <14>, - <15>, <16>, <18>, - <20>, <21>, <22>, - <23>; - clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu", - "ahb0_ss", "ahb0_sd", "ahb0_nand1", - "ahb0_nand0", "ahb0_sdram", - "ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts", - "ahb0_spi0", "ahb0_spi1", "ahb0_spi2", - "ahb0_spi3"; - }; - - ahb1_gates: clk@06000584 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-ahb1-gates-clk"; - reg = <0x06000584 0x4>; - clocks = <&ahb1>; - clock-indices = <0>, <1>, - <17>, <21>, - <22>, <23>, - <24>; - clock-output-names = "ahb1_usbotg", "ahb1_usbhci", - "ahb1_gmac", "ahb1_msgbox", - "ahb1_spinlock", "ahb1_hstimer", - "ahb1_dma"; - }; - - ahb2_gates: clk@06000588 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-ahb2-gates-clk"; - reg = <0x06000588 0x4>; - clocks = <&ahb2>; - clock-indices = <0>, <1>, - <2>, <4>, <5>, - <7>, <8>, <11>; - clock-output-names = "ahb2_lcd0", "ahb2_lcd1", - "ahb2_edp", "ahb2_csi", "ahb2_hdmi", - "ahb2_de", "ahb2_mp", "ahb2_mipi_dsi"; - }; - - apb0_gates: clk@06000590 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-apb0-gates-clk"; - reg = <0x06000590 0x4>; - clocks = <&apb0>; - clock-indices = <1>, <5>, - <11>, <12>, <13>, - <15>, <17>, <18>, - <19>; - clock-output-names = "apb0_spdif", "apb0_pio", - "apb0_ac97", "apb0_i2s0", "apb0_i2s1", - "apb0_lradc", "apb0_gpadc", "apb0_twd", - "apb0_cirtx"; - }; - - apb1_gates: clk@06000594 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-apb1-gates-clk"; - reg = <0x06000594 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <3>, <4>, - <16>, <17>, - <18>, <19>, - <20>, <21>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_i2c3", "apb1_i2c4", - "apb1_uart0", "apb1_uart1", - "apb1_uart2", "apb1_uart3", - "apb1_uart4", "apb1_uart5"; - }; - cpus_clk: clk@08001410 { compatible = "allwinner,sun9i-a80-cpus-clk"; reg = <0x08001410 0x4>; #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>; + clocks = <&osc32k>, <&osc24M>, + <&ccu CLK_PLL_PERIPH0>, + <&ccu CLK_PLL_AUDIO>; clock-output-names = "cpus"; }; @@ -453,8 +245,8 @@ compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a00000 0x100>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 1>; - resets = <&usb_mod_clk 17>; + clocks = <&usb_clocks CLK_BUS_HCI0>; + resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; phy-names = "usb"; status = "disabled"; @@ -464,8 +256,9 @@ compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; reg = <0x00a00400 0x100>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 1>, <&usb_mod_clk 2>; - resets = <&usb_mod_clk 17>; + clocks = <&usb_clocks CLK_BUS_HCI0>, + <&usb_clocks CLK_USB_OHCI0>; + resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; phy-names = "usb"; status = "disabled"; @@ -474,9 +267,9 @@ usbphy1: phy@00a00800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a00800 0x4>; - clocks = <&usb_phy_clk 1>; + clocks = <&usb_clocks CLK_USB0_PHY>; clock-names = "phy"; - resets = <&usb_phy_clk 17>; + resets = <&usb_clocks RST_USB0_PHY>; reset-names = "phy"; status = "disabled"; #phy-cells = <0>; @@ -486,8 +279,8 @@ compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a01000 0x100>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 3>; - resets = <&usb_mod_clk 18>; + clocks = <&usb_clocks CLK_BUS_HCI1>; + resets = <&usb_clocks RST_USB1_HCI>; phys = <&usbphy2>; phy-names = "usb"; status = "disabled"; @@ -496,11 +289,16 @@ usbphy2: phy@00a01800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a01800 0x4>; - clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>, - <&usb_phy_clk 3>; - clock-names = "hsic_480M", "hsic_12M", "phy"; - resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>; - reset-names = "hsic", "phy"; + clocks = <&usb_clocks CLK_USB1_HSIC>, + <&usb_clocks CLK_USB_HSIC>, + <&usb_clocks CLK_USB1_PHY>; + clock-names = "hsic_480M", + "hsic_12M", + "phy"; + resets = <&usb_clocks RST_USB1_HSIC>, + <&usb_clocks RST_USB1_PHY>; + reset-names = "hsic", + "phy"; status = "disabled"; #phy-cells = <0>; /* usb1 is always used with HSIC */ @@ -511,8 +309,8 @@ compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a02000 0x100>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 5>; - resets = <&usb_mod_clk 19>; + clocks = <&usb_clocks CLK_BUS_HCI2>; + resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; phy-names = "usb"; status = "disabled"; @@ -522,8 +320,9 @@ compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; reg = <0x00a02400 0x100>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 5>, <&usb_mod_clk 6>; - resets = <&usb_mod_clk 19>; + clocks = <&usb_clocks CLK_BUS_HCI2>, + <&usb_clocks CLK_USB_OHCI2>; + resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; phy-names = "usb"; status = "disabled"; @@ -532,20 +331,35 @@ usbphy3: phy@00a02800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a02800 0x4>; - clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>, - <&usb_phy_clk 5>; - clock-names = "hsic_480M", "hsic_12M", "phy"; - resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>; - reset-names = "hsic", "phy"; + clocks = <&usb_clocks CLK_USB2_HSIC>, + <&usb_clocks CLK_USB_HSIC>, + <&usb_clocks CLK_USB2_PHY>; + clock-names = "hsic_480M", + "hsic_12M", + "phy"; + resets = <&usb_clocks RST_USB2_HSIC>, + <&usb_clocks RST_USB2_PHY>; + reset-names = "hsic", + "phy"; status = "disabled"; #phy-cells = <0>; }; + usb_clocks: clock@00a08000 { + compatible = "allwinner,sun9i-a80-usb-clks"; + reg = <0x00a08000 0x8>; + clocks = <&ccu CLK_BUS_USB>, <&osc24M>; + clock-names = "bus", "hosc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + mmc0: mmc@01c0f000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>, - <&mmc0_clk 1>, <&mmc0_clk 2>; + clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&mmc_config_clk 0>; reset-names = "ahb"; @@ -558,8 +372,9 @@ mmc1: mmc@01c10000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>, - <&mmc1_clk 1>, <&mmc1_clk 2>; + clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&mmc_config_clk 1>; reset-names = "ahb"; @@ -572,8 +387,9 @@ mmc2: mmc@01c11000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>, - <&mmc2_clk 1>, <&mmc2_clk 2>; + clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&mmc_config_clk 2>; reset-names = "ahb"; @@ -586,8 +402,9 @@ mmc3: mmc@01c12000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c12000 0x1000>; - clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>, - <&mmc3_clk 1>, <&mmc3_clk 2>; + clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>, + <&ccu CLK_MMC3_OUTPUT>, + <&ccu CLK_MMC3_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&mmc_config_clk 3>; reset-names = "ahb"; @@ -600,9 +417,9 @@ mmc_config_clk: clk@01c13000 { compatible = "allwinner,sun9i-a80-mmc-config-clk"; reg = <0x01c13000 0x10>; - clocks = <&ahb0_gates 8>; + clocks = <&ccu CLK_BUS_MMC>; clock-names = "ahb"; - resets = <&ahb0_resets 8>; + resets = <&ccu RST_BUS_MMC>; reset-names = "ahb"; #clock-cells = <1>; #reset-cells = <1>; @@ -613,7 +430,7 @@ gic: interrupt-controller@01c41000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c41000 0x1000>, - <0x01c42000 0x1000>, + <0x01c42000 0x2000>, <0x01c44000 0x2000>, <0x01c46000 0x2000>; interrupt-controller; @@ -621,34 +438,27 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; - ahb0_resets: reset@060005a0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005a0 0x4>; - }; - - ahb1_resets: reset@060005a4 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005a4 0x4>; - }; - - ahb2_resets: reset@060005a8 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005a8 0x4>; - }; - - apb0_resets: reset@060005b0 { + de_clocks: clock@03000000 { + compatible = "allwinner,sun9i-a80-de-clks"; + reg = <0x03000000 0x30>; + clocks = <&ccu CLK_DE>, + <&ccu CLK_SDRAM>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "dram", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005b0 0x4>; }; - apb1_resets: reset@060005b4 { + ccu: clock@06000000 { + compatible = "allwinner,sun9i-a80-ccu"; + reg = <0x06000000 0x800>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005b4 0x4>; }; timer@06000c00 { @@ -678,7 +488,7 @@ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -687,50 +497,44 @@ #gpio-cells = <3>; i2c3_pins_a: i2c3@0 { - allwinner,pins = "PG10", "PG11"; - allwinner,function = "i2c3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG10", "PG11"; + function = "i2c3"; }; mmc0_pins: mmc0 { - allwinner,pins = "PF0", "PF1" ,"PF2", "PF3", - "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1" ,"PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc1_pins: mmc1 { - allwinner,pins = "PG0", "PG1" ,"PG2", "PG3", + pins = "PG0", "PG1" ,"PG2", "PG3", "PG4", "PG5"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; }; mmc2_8bit_pins: mmc2_8bit { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", - "PC10", "PC11", "PC12", - "PC13", "PC14", "PC15", - "PC16"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", + "PC13", "PC14", "PC15", + "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; uart0_pins_a: uart0@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12", "PH13"; + function = "uart0"; }; uart4_pins_a: uart4@0 { - allwinner,pins = "PG12", "PG13", "PG14", "PG15"; - allwinner,function = "uart4"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG12", "PG13", "PG14", "PG15"; + function = "uart4"; }; }; @@ -740,8 +544,8 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 16>; - resets = <&apb1_resets 16>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; @@ -751,8 +555,8 @@ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 17>; - resets = <&apb1_resets 17>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; @@ -762,8 +566,8 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 18>; - resets = <&apb1_resets 18>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; status = "disabled"; }; @@ -773,8 +577,8 @@ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 19>; - resets = <&apb1_resets 19>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; status = "disabled"; }; @@ -784,8 +588,8 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 20>; - resets = <&apb1_resets 20>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; status = "disabled"; }; @@ -795,8 +599,8 @@ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 21>; - resets = <&apb1_resets 21>; + clocks = <&ccu CLK_BUS_UART5>; + resets = <&ccu RST_BUS_UART5>; status = "disabled"; }; @@ -804,8 +608,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07002800 0x400>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 0>; - resets = <&apb1_resets 0>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -815,8 +619,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07002c00 0x400>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 1>; - resets = <&apb1_resets 1>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -826,8 +630,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003000 0x400>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 2>; - resets = <&apb1_resets 2>; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -837,8 +641,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003400 0x400>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 3>; - resets = <&apb1_resets 3>; + clocks = <&ccu CLK_BUS_I2C3>; + resets = <&ccu RST_BUS_I2C3>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -848,8 +652,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003800 0x400>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 4>; - resets = <&apb1_resets 4>; + clocks = <&ccu CLK_BUS_I2C4>; + resets = <&ccu RST_BUS_I2C4>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -912,17 +716,15 @@ #gpio-cells = <3>; r_ir_pins: r_ir { - allwinner,pins = "PL6"; - allwinner,function = "s_cir_rx"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL6"; + function = "s_cir_rx"; }; r_rsb_pins: r_rsb { - allwinner,pins = "PN0", "PN1"; - allwinner,function = "s_rsb"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PN0", "PN1"; + function = "s_rsb"; + drive-strength = <20>; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index f1953b0c5059..17c09fed9e84 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -47,31 +47,23 @@ &pio { ahci_pwr_pin_a: ahci_pwr_pin@0 { - allwinner,pins = "PB8"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB8"; + function = "gpio_out"; }; usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PB9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB9"; + function = "gpio_out"; }; usb1_vbus_pin_a: usb1_vbus_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH6"; + function = "gpio_out"; }; usb2_vbus_pin_a: usb2_vbus_pin@0 { - allwinner,pins = "PH3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH3"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi index dd7eb5f624d9..0c8cad4d6ee6 100644 --- a/arch/arm/boot/dts/tango4-common.dtsi +++ b/arch/arm/boot/dts/tango4-common.dtsi @@ -97,6 +97,52 @@ clocks = <&xtal>; }; + mmc0: mmc@21000 { + compatible = "arasan,sdhci-8.9a"; + reg = <0x21000 0x200>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&clkgen SDIO_CLK>, <&clkgen SYS_CLK>; + interrupts = <60 IRQ_TYPE_LEVEL_HIGH>; + }; + + mmc1: mmc@21200 { + compatible = "arasan,sdhci-8.9a"; + reg = <0x21200 0x200>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&clkgen SDIO_CLK>, <&clkgen SYS_CLK>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + }; + + usb0: usb@21400 { + compatible = "chipidea,usb2"; + reg = <0x21400 0x200>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb0_phy>; + phy-names = "usb-phy"; + }; + + usb0_phy: phy@21700 { + compatible = "sigma,smp8642-usb-phy"; + reg = <0x21700 0x100>; + #phy-cells = <0>; + clocks = <&clkgen USB_CLK>; + }; + + usb1: usb@25400 { + compatible = "chipidea,usb2"; + reg = <0x25400 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb1_phy>; + phy-names = "usb-phy"; + }; + + usb1_phy: phy@25700 { + compatible = "sigma,smp8642-usb-phy"; + reg = <0x25700 0x100>; + #phy-cells = <0>; + clocks = <&clkgen USB_CLK>; + }; + eth0: ethernet@26000 { compatible = "sigma,smp8734-ethernet"; reg = <0x26000 0x800>; diff --git a/arch/arm/boot/dts/tango4-vantage-1172.dts b/arch/arm/boot/dts/tango4-vantage-1172.dts index 4cab64cb581e..86d8df98802f 100644 --- a/arch/arm/boot/dts/tango4-vantage-1172.dts +++ b/arch/arm/boot/dts/tango4-vantage-1172.dts @@ -8,6 +8,7 @@ aliases { serial = &uart; + eth0 = ð0; }; memory@80000000 { @@ -34,3 +35,7 @@ reg = <4>; }; }; + +&mmc1 { + non-removable; /* eMMC */ +}; diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts index 653044a44f0d..5b860ad5cbee 100644 --- a/arch/arm/boot/dts/tegra124-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts @@ -187,14 +187,8 @@ /* Apalis SD1 */ sdhci@700b0400 { status = "okay"; - /* - * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it - * features some magic properties even though the external - * loopback is disabled and the internal loopback used as per - * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits being - * set to 0xfffd according to the TRM! - * cd-gpios = <&gpio TEGRA_GPIO(EE, 4) GPIO_ACTIVE_LOW>; - */ + /* SD1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; bus-width = <4>; vqmmc-supply = <&vddio_sdmmc3>; }; diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index 0819721dda59..f9e623bdd5c3 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -44,7 +44,7 @@ /* * Toradex Apalis TK1 Module Device Tree - * Compatible for Revisions 2GB: V1.0A + * Compatible for Revisions 2GB: V1.0A, V1.0B, V1.1A */ / { model = "Toradex Apalis TK1"; @@ -257,7 +257,7 @@ }; dp_hpd_pff0 { nvidia,pins = "dp_hpd_pff0"; - nvidia,function = "rsvd2"; + nvidia,function = "dp"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -416,18 +416,10 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - /* - * Don't use MMC1_D6 aka SDMMC3_CLK_LB_IN for now as it - * features some magic properties even though the - * external loopback is disabled and the internal - * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0 - * register's SDMMC_SPARE1 bits being set to 0xfffd - * according to the TRM! - */ sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */ nvidia,pins = "sdmmc3_clk_lb_in_pee5"; - nvidia,function = "sdmmc3"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; @@ -522,20 +514,12 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - /* - * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it - * features some magic properties even though the - * external loopback is disabled and the internal - * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0 - * register's SDMMC_SPARE1 bits being set to 0xfffd - * according to the TRM! - */ - sdmmc3_clk_lb_out_pee4 { /* CD# GPIO */ - nvidia,pins = "sdmmc3_clk_lb_out_pee4"; - nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; + sdmmc3_cd_n_pv2 { /* CD# GPIO */ + nvidia,pins = "sdmmc3_cd_n_pv2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; /* Apalis SPDIF */ @@ -1153,11 +1137,11 @@ nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - /* GPIO_PI6 aka TEMP_ALERT_L */ + /* GPIO_PI6 aka TMP451 ALERT#/THERM2# */ pi6 { nvidia,pins = "pi6"; nvidia,function = "rsvd1"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; @@ -1514,13 +1498,6 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - sdmmc3_cd_n_pv2 { /* NC */ - nvidia,pins = "sdmmc3_cd_n_pv2"; - nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - }; gpio_x1_aud_px1 { /* NC */ nvidia,pins = "gpio_x1_aud_px1"; nvidia,function = "rsvd2"; @@ -1570,6 +1547,22 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; + /* + * Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output + * driver enabled aka not tristated and input driver + * enabled as well as it features some magic properties + * even though the external loopback is disabled and the + * internal loopback used as per + * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 + * bits being set to 0xfffd according to the TRM! + */ + sdmmc3_clk_lb_out_pee4 { /* NC */ + nvidia,pins = "sdmmc3_clk_lb_out_pee4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; }; }; diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts index 67d7cfb32541..12eb7809d9ab 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big.dts +++ b/arch/arm/boot/dts/tegra124-nyan-big.dts @@ -6,7 +6,11 @@ / { model = "Acer Chromebook 13 CB5-311"; - compatible = "google,nyan-big", "nvidia,tegra124"; + compatible = "google,nyan-big-rev7", "google,nyan-big-rev6", + "google,nyan-big-rev5", "google,nyan-big-rev4", + "google,nyan-big-rev3", "google,nyan-big-rev2", + "google,nyan-big-rev1", "google,nyan-big-rev0", + "google,nyan-big", "google,nyan", "nvidia,tegra124"; panel: panel { compatible = "auo,b133xtn01"; @@ -1098,19 +1102,19 @@ }; cam_i2c_scl_pbb1 { nvidia,pins = "cam_i2c_scl_pbb1"; - nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; cam_i2c_sda_pbb2 { nvidia,pins = "cam_i2c_sda_pbb2"; - nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; pbb3 { nvidia,pins = "pbb3"; diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/tegra124-nyan-blaze.dts index c9582361c26e..1078a73d5092 100644 --- a/arch/arm/boot/dts/tegra124-nyan-blaze.dts +++ b/arch/arm/boot/dts/tegra124-nyan-blaze.dts @@ -6,7 +6,13 @@ / { model = "HP Chromebook 14"; - compatible = "google,nyan-blaze", "google,nyan", "nvidia,tegra124"; + compatible = "google,nyan-blaze-rev10", "google,nyan-blaze-rev9", + "google,nyan-blaze-rev8", "google,nyan-blaze-rev7", + "google,nyan-blaze-rev6", "google,nyan-blaze-rev5", + "google,nyan-blaze-rev4", "google,nyan-blaze-rev3", + "google,nyan-blaze-rev2", "google,nyan-blaze-rev1", + "google,nyan-blaze-rev0", "google,nyan-blaze", + "google,nyan", "nvidia,tegra124"; panel: panel { compatible = "samsung,ltn140at29-301"; @@ -1094,19 +1100,19 @@ }; cam_i2c_scl_pbb1 { nvidia,pins = "cam_i2c_scl_pbb1"; - nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; cam_i2c_sda_pbb2 { nvidia,pins = "cam_i2c_sda_pbb2"; - nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; pbb3 { nvidia,pins = "pbb3"; diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index eabfa655a3cd..5cf987b5401e 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -65,7 +65,7 @@ compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>; }; temperature-sensor@4c { @@ -331,10 +331,11 @@ reg = <0x9>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(J, 0) - GPIO_ACTIVE_HIGH>; + IRQ_TYPE_EDGE_BOTH>; ti,ac-detect-gpios = <&gpio TEGRA_GPIO(J, 0) GPIO_ACTIVE_HIGH>; + ti,external-control; }; battery: sbs-battery@b { diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 4e361a8c167e..b4bfa5586c23 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -569,6 +569,7 @@ regulator-name = "+3VS,vdd_pnl"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-boot-on; gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>; enable-active-high; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 381747f114a9..87b07fbadbbe 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -366,6 +366,7 @@ sdhci@c8000000 { status = "okay"; + broken-cd; bus-width = <4>; }; diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi index 10a711041b4a..8ee79da9af7c 100644 --- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi @@ -1,7 +1,8 @@ /* * Device Tree Source for UniPhier SoCs default pinctrl settings * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2017 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -43,6 +44,11 @@ */ &pinctrl { + pinctrl_emmc: emmc_grp { + groups = "emmc"; + function = "emmc"; + }; + pinctrl_i2c0: i2c0_grp { groups = "i2c0"; function = "i2c0"; @@ -78,6 +84,16 @@ function = "nand"; }; + pinctrl_sd: sd_grp { + groups = "sd"; + function = "sd"; + }; + + pinctrl_sd1: sd1_grp { + groups = "sd1"; + function = "sd1"; + }; + pinctrl_system_bus: system_bus_grp { groups = "system_bus", "system_bus_cs1"; function = "system_bus"; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 102838fcc588..15f4fd3f4695 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -81,7 +81,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0x2c001000 0 0x1000>, - <0 0x2c002000 0 0x1000>, + <0 0x2c002000 0 0x2000>, <0 0x2c004000 0 0x2000>, <0 0x2c006000 0 0x2000>; interrupts = <1 9 0xf04>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 45d08cc37b01..bd107c5a0226 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -131,7 +131,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0x2c001000 0 0x1000>, - <0 0x2c002000 0 0x1000>, + <0 0x2c002000 0 0x2000>, <0 0x2c004000 0 0x2000>, <0 0x2c006000 0 0x2000>; interrupts = <1 9 0xf04>; diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index 1e0b823f7e8f..091b738041a0 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index 21bfef957b68..b6a1eeeb2bb4 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts index b3aeab58f718..076998968fb5 100644 --- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi index 1a8a0efa19a6..515c4d2f28b0 100644 --- a/arch/arm/boot/dts/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi index d7fdb2a7d97b..3d9896171bfc 100644 --- a/arch/arm/boot/dts/vf500.dtsi +++ b/arch/arm/boot/dts/vf500.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts index dbca4f86fdbb..ef9b4d6209f6 100644 --- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index 9ec9e337f5a8..395812c52933 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index cdc100732514..53e3b8b250c6 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 7ea617e47fe4..7940408838df 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -13,17 +13,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,43 +32,23 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -#include "vf610.dtsi" +#include "vf610-zii-dev.dtsi" / { model = "ZII VF610 Development Board, Rev B"; compatible = "zii,vf610dev-b", "zii,vf610dev", "fsl,vf610"; - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory { - reg = <0x80000000 0x20000000>; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pinctrl_leds_debug>; - pinctrl-names = "default"; - - debug { - label = "zii:green:debug1"; - gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - mdio-mux { compatible = "mdio-mux-gpio"; pinctrl-0 = <&pinctrl_mdio_mux>; @@ -86,7 +66,7 @@ #address-cells = <1>; #size-cells = <0>; - switch0: switch0@0 { + switch0: switch@0 { compatible = "marvell,mv88e6085"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -102,6 +82,7 @@ ports { #address-cells = <1>; #size-cells = <0>; + port@0 { reg = <0>; label = "lan0"; @@ -136,6 +117,7 @@ reg = <6>; label = "cpu"; ethernet = <&fec1>; + fixed-link { speed = <100>; full-duplex; @@ -153,7 +135,8 @@ switch0phy1: switch1phy0@1 { reg = <1>; interrupt-parent = <&switch0>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + }; switch0phy2: switch1phy0@2 { reg = <2>; interrupt-parent = <&switch0>; @@ -168,7 +151,7 @@ #address-cells = <1>; #size-cells = <0>; - switch1: switch1@0 { + switch1: switch@0 { compatible = "marvell,mv88e6085"; pinctrl-0 = <&pinctrl_gpio_switch1>; pinctrl-names = "default"; @@ -184,6 +167,7 @@ ports { #address-cells = <1>; #size-cells = <0>; + port@0 { reg = <0>; label = "lan3"; @@ -207,6 +191,7 @@ label = "dsa"; link = <&switch2port9>; phy-mode = "rgmii-txid"; + fixed-link { speed = <1000>; full-duplex; @@ -227,16 +212,19 @@ mdio { #address-cells = <1>; #size-cells = <0>; + switch1phy0: switch1phy0@0 { reg = <0>; interrupt-parent = <&switch1>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; }; + switch1phy1: switch1phy0@1 { reg = <1>; interrupt-parent = <&switch1>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; + switch1phy2: switch1phy0@2 { reg = <2>; interrupt-parent = <&switch1>; @@ -261,6 +249,7 @@ ports { #address-cells = <1>; #size-cells = <0>; + port@0 { reg = <0>; label = "lan6"; @@ -279,6 +268,7 @@ port@3 { reg = <3>; label = "optical3"; + fixed-link { speed = <1000>; full-duplex; @@ -290,6 +280,7 @@ port@4 { reg = <4>; label = "optical4"; + fixed-link { speed = <1000>; full-duplex; @@ -304,6 +295,7 @@ phy-mode = "rgmii-txid"; link = <&switch1port5 &switch0port5>; + fixed-link { speed = <1000>; full-duplex; @@ -320,25 +312,6 @@ }; }; - reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { - compatible = "regulator-fixed"; - regulator-name = "vcc_3v3_mcu"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - usb0_vbus: regulator-usb0-vbus { - compatible = "regulator-fixed"; - pinctrl-0 = <&pinctrl_usb_vbus>; - regulator-name = "usb_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 6 0>; - }; - spi0 { compatible = "spi-gpio"; pinctrl-0 = <&pinctrl_gpio_spi0>; @@ -375,49 +348,6 @@ }; }; -&adc0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_adc0_ad5>; - vref-supply = <®_vcc_3v3_mcu>; - status = "okay"; -}; - -&edma0 { - status = "okay"; -}; - -&esdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1>; - bus-width = <4>; - status = "okay"; -}; - -&fec0 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec0>; - status = "okay"; -}; - -&fec1 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; - status = "okay"; - - fixed-link { - speed = <100>; - full-duplex; - }; - - mdio1: mdio { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - }; -}; - &i2c0 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -442,33 +372,6 @@ interrupt-parent = <&gpio2>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; }; - - lm75@48 { - compatible = "national,lm75"; - reg = <0x48>; - }; - - at24c04@50 { - compatible = "atmel,24c04"; - reg = <0x50>; - }; - - at24c04@52 { - compatible = "atmel,24c04"; - reg = <0x52>; - }; - - ds1682@6b { - compatible = "dallas,ds1682"; - reg = <0x6b>; - }; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; }; &i2c2 { @@ -538,120 +441,8 @@ }; }; -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&usbdev0 { - disable-over-current; - vbus-supply = <&usb0_vbus>; - dr_mode = "host"; - status = "okay"; -}; - -&usbh1 { - disable-over-current; - status = "okay"; -}; - -&usbmisc0 { - status = "okay"; -}; - -&usbmisc1 { - status = "okay"; -}; - -&usbphy0 { - status = "okay"; -}; - -&usbphy1 { - status = "okay"; -}; &iomuxc { - pinctrl_adc0_ad5: adc0ad5grp { - fsl,pins = < - VF610_PAD_PTC30__ADC0_SE5 0x00a1 - >; - }; - - pinctrl_dspi0: dspi0grp { - fsl,pins = < - VF610_PAD_PTB18__DSPI0_CS1 0x1182 - VF610_PAD_PTB19__DSPI0_CS0 0x1182 - VF610_PAD_PTB20__DSPI0_SIN 0x1181 - VF610_PAD_PTB21__DSPI0_SOUT 0x1182 - VF610_PAD_PTB22__DSPI0_SCK 0x1182 - >; - }; - - pinctrl_dspi2: dspi2grp { - fsl,pins = < - VF610_PAD_PTD31__DSPI2_CS1 0x1182 - VF610_PAD_PTD30__DSPI2_CS0 0x1182 - VF610_PAD_PTD29__DSPI2_SIN 0x1181 - VF610_PAD_PTD28__DSPI2_SOUT 0x1182 - VF610_PAD_PTD27__DSPI2_SCK 0x1182 - >; - }; - - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - VF610_PAD_PTA24__ESDHC1_CLK 0x31ef - VF610_PAD_PTA25__ESDHC1_CMD 0x31ef - VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef - VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef - VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef - VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef - VF610_PAD_PTA7__GPIO_134 0x219d - >; - }; - - pinctrl_fec0: fec0grp { - fsl,pins = < - VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2 - VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3 - VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 - VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 - VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 - VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 - VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 - VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 - VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 - >; - }; - - pinctrl_fec1: fec1grp { - fsl,pins = < - VF610_PAD_PTA6__RMII_CLKIN 0x30d1 - VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 - VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 - VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 - VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 - VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 - VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 - VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 - VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 - VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 - >; - }; - pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 { fsl,pins = < VF610_PAD_PTE27__GPIO_132 0x33e2 @@ -680,39 +471,6 @@ >; }; - pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset { - fsl,pins = < - VF610_PAD_PTE14__GPIO_119 0x31c2 - >; - }; - - pinctrl_i2c0: i2c0grp { - fsl,pins = < - VF610_PAD_PTB14__I2C0_SCL 0x37ff - VF610_PAD_PTB15__I2C0_SDA 0x37ff - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - VF610_PAD_PTB16__I2C1_SCL 0x37ff - VF610_PAD_PTB17__I2C1_SDA 0x37ff - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - VF610_PAD_PTA22__I2C2_SCL 0x37ff - VF610_PAD_PTA23__I2C2_SDA 0x37ff - >; - }; - - pinctrl_leds_debug: pinctrl-leds-debug { - fsl,pins = < - VF610_PAD_PTD20__GPIO_74 0x31c2 - >; - }; - pinctrl_mdio_mux: pinctrl-mdio-mux { fsl,pins = < VF610_PAD_PTA18__GPIO_8 0x31c2 @@ -727,57 +485,4 @@ VF610_PAD_PTB28__GPIO_98 0x219d >; }; - - pinctrl_pwm0: pwm0grp { - fsl,pins = < - VF610_PAD_PTB0__FTM0_CH0 0x1582 - VF610_PAD_PTB1__FTM0_CH1 0x1582 - VF610_PAD_PTB2__FTM0_CH2 0x1582 - VF610_PAD_PTB3__FTM0_CH3 0x1582 - >; - }; - - pinctrl_qspi0: qspi0grp { - fsl,pins = < - VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3 - VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff - VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3 - VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3 - VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3 - VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3 - >; - }; - - pinctrl_uart0: uart0grp { - fsl,pins = < - VF610_PAD_PTB10__UART0_TX 0x21a2 - VF610_PAD_PTB11__UART0_RX 0x21a1 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - VF610_PAD_PTB23__UART1_TX 0x21a2 - VF610_PAD_PTB24__UART1_RX 0x21a1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - VF610_PAD_PTD0__UART2_TX 0x21a2 - VF610_PAD_PTD1__UART2_RX 0x21a1 - >; - }; - - pinctrl_usb_vbus: pinctrl-usb-vbus { - fsl,pins = < - VF610_PAD_PTA16__GPIO_6 0x31c2 - >; - }; - - pinctrl_usb0_host: usb0-host-grp { - fsl,pins = < - VF610_PAD_PTD6__GPIO_85 0x0062 - >; - }; }; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts new file mode 100644 index 000000000000..6a45bd24ffe6 --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -0,0 +1,416 @@ +/* + * Copyright (C) 2015, 2016 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "vf610-zii-dev.dtsi" + +/ { + model = "ZII VF610 Development Board, Rev C"; + compatible = "zii,vf610dev-c", "zii,vf610dev", "fsl,vf610"; + + mdio-mux { + compatible = "mdio-mux-gpio"; + pinctrl-0 = <&pinctrl_mdio_mux>; + pinctrl-names = "default"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH + &gpio0 9 GPIO_ACTIVE_HIGH + &gpio0 25 GPIO_ACTIVE_HIGH>; + mdio-parent-bus = <&mdio1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio_mux_1: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + switch0: switch@0 { + compatible = "marvell,mv88e6190"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dsa,member = <0 0>; + eeprom-length = <512>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan4"; + }; + + switch0port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch1port10>; + }; + }; + }; + }; + + mdio_mux_2: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + switch1: switch@0 { + compatible = "marvell,mv88e6190"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dsa,member = <0 1>; + eeprom-length = <512>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan5"; + }; + + port@2 { + reg = <2>; + label = "lan6"; + }; + + port@3 { + reg = <3>; + label = "lan7"; + }; + + port@4 { + reg = <4>; + label = "lan8"; + }; + + + switch1port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch0port10>; + }; + }; + }; + }; + + mdio_mux_4: mdio@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&dspi0 { + bus-num = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi0>; + status = "okay"; + spi-num-chipselects = <2>; + + m25p128@0 { + compatible = "m25p128", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <1000000>; + }; + + atzb-rf-233@1 { + compatible = "atmel,at86rf233"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctr_atzb_rf_233>; + + spi-max-frequency = <7500000>; + reg = <1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpio3>; + xtal-trim = /bits/ 8 <0x06>; + + sleep-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio6 10 GPIO_ACTIVE_HIGH>; + + fsl,spi-cs-sck-delay = <180>; + fsl,spi-sck-cs-delay = <250>; + }; +}; + +&i2c0 { + /* + * U712 + * + * Exposed signals: + * P1 - WE2_CMD + * P2 - WE2_CLK + */ + gpio5: pca9557@18 { + compatible = "nxp,pca9557"; + reg = <0x18>; + gpio-controller; + #gpio-cells = <2>; + }; + + /* + * U121 + * + * Exposed signals: + * I/O0 - ENET_SWR_EN + * I/O1 - ESW1_RESETn + * I/O2 - ARINC_RESET + * I/O3 - DD1_IO_RESET + * I/O4 - ESW2_RESETn + * I/O5 - ESW3_RESETn + * I/O6 - ESW4_RESETn + * I/O8 - TP909 + * I/O9 - FEM_SEL + * I/O10 - WIFI_RESETn + * I/O11 - PHY_RSTn + * I/O12 - OPT1_SD + * I/O13 - OPT2_SD + * I/O14 - OPT1_TX_DIS + * I/O15 - OPT2_TX_DIS + */ + gpio6: sx1503@20 { + compatible = "semtech,sx1503q"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sx1503_20>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + interrupt-controller; + + enet_swr_en { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "enet-swr-en"; + }; + }; + + /* + * U715 + * + * Exposed signals: + * IO0 - WE1_CLK + * IO1 - WE1_CMD + */ + gpio7: pca9554@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + + }; +}; + +&i2c1 { + at24mac602@00 { + compatible = "atmel,24c02"; + reg = <0x50>; + read-only; + }; +}; + +&i2c2 { + tca9548@70 { + compatible = "nxp,pca9548"; + pinctrl-0 = <&pinctrl_i2c_mux_reset>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + sfp2: at24c04@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + sfp3: at24c04@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&gpio0 { + eth0_intrp { + gpio-hog; + gpios = <23 GPIO_ACTIVE_HIGH>; + input; + line-name = "sx1503-irq"; + }; +}; + +&gpio3 { + eth0_intrp { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + input; + line-name = "eth0-intrp"; + }; +}; + +&fec0 { + mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec0_phy_int>; + + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + reg = <0>; + }; + }; +}; + +&iomuxc { + pinctr_atzb_rf_233: pinctrl-atzb-rf-233 { + fsl,pins = < + VF610_PAD_PTB2__GPIO_24 0x31c2 + VF610_PAD_PTE27__GPIO_132 0x33e2 + >; + }; + + + pinctrl_sx1503_20: pinctrl-sx1503-20 { + fsl,pins = < + VF610_PAD_PTB1__GPIO_23 0x219d + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + VF610_PAD_PTA20__UART3_TX 0x21a2 + VF610_PAD_PTA21__UART3_RX 0x21a1 + >; + }; + + pinctrl_mdio_mux: pinctrl-mdio-mux { + fsl,pins = < + VF610_PAD_PTA18__GPIO_8 0x31c2 + VF610_PAD_PTA19__GPIO_9 0x31c2 + VF610_PAD_PTB3__GPIO_25 0x31c2 + >; + }; + + pinctrl_fec0_phy_int: pinctrl-fec0-phy-int { + fsl,pins = < + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; +}; diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi new file mode 100644 index 000000000000..ca9e1bc35e45 --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -0,0 +1,383 @@ +/* + * Copyright (C) 2015, 2016 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "vf610.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + debug { + label = "zii:green:debug1"; + gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + usb0_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + pinctrl-0 = <&pinctrl_usb_vbus>; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 6 0>; + }; +}; + +&adc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_ad5>; + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&edma0 { + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec0>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + status = "okay"; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + + at24c04@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; + + ds1682@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbdev0 { + disable-over-current; + vbus-supply = <&usb0_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +}; + +&usbmisc0 { + status = "okay"; +}; + +&usbmisc1 { + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; + +&iomuxc { + pinctrl_adc0_ad5: adc0ad5grp { + fsl,pins = < + VF610_PAD_PTC30__ADC0_SE5 0x00a1 + >; + }; + + pinctrl_dspi0: dspi0grp { + fsl,pins = < + VF610_PAD_PTB18__DSPI0_CS1 0x1182 + VF610_PAD_PTB19__DSPI0_CS0 0x1182 + VF610_PAD_PTB20__DSPI0_SIN 0x1181 + VF610_PAD_PTB21__DSPI0_SOUT 0x1182 + VF610_PAD_PTB22__DSPI0_SCK 0x1182 + >; + }; + + pinctrl_dspi2: dspi2grp { + fsl,pins = < + VF610_PAD_PTD31__DSPI2_CS1 0x1182 + VF610_PAD_PTD30__DSPI2_CS0 0x1182 + VF610_PAD_PTD29__DSPI2_SIN 0x1181 + VF610_PAD_PTD28__DSPI2_SOUT 0x1182 + VF610_PAD_PTD27__DSPI2_SCK 0x1182 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTA7__GPIO_134 0x219d + >; + }; + + pinctrl_fec0: fec0grp { + fsl,pins = < + VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2 + VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3 + VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 + VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 + VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 + VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 + VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 + VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 + VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_gpio_spi0: pinctrl-gpio-spi0 { + fsl,pins = < + VF610_PAD_PTB22__GPIO_44 0x33e2 + VF610_PAD_PTB21__GPIO_43 0x33e2 + VF610_PAD_PTB20__GPIO_42 0x33e1 + VF610_PAD_PTB19__GPIO_41 0x33e2 + VF610_PAD_PTB18__GPIO_40 0x33e2 + >; + }; + + pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset { + fsl,pins = < + VF610_PAD_PTE14__GPIO_119 0x31c2 + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_i2c0_gpio: i2c0grp-gpio { + fsl,pins = < + VF610_PAD_PTB14__GPIO_36 0x31c2 + VF610_PAD_PTB15__GPIO_37 0x31c2 + >; + }; + + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + VF610_PAD_PTA22__I2C2_SCL 0x37ff + VF610_PAD_PTA23__I2C2_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD20__GPIO_74 0x31c2 + >; + }; + + pinctrl_qspi0: qspi0grp { + fsl,pins = < + VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3 + VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff + VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3 + VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3 + VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3 + VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB23__UART1_TX 0x21a2 + VF610_PAD_PTB24__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + >; + }; + + pinctrl_usb_vbus: pinctrl-usb-vbus { + fsl,pins = < + VF610_PAD_PTA16__GPIO_6 0x31c2 + >; + }; + + pinctrl_usb0_host: usb0-host-grp { + fsl,pins = < + VF610_PAD_PTD6__GPIO_85 0x0062 + >; + }; +}; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 0cfc060f94d7..80fef182c672 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts index 2931a80caccb..7198e8cceb0d 100644 --- a/arch/arm/boot/dts/vf610m4-colibri.dts +++ b/arch/arm/boot/dts/vf610m4-colibri.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610m4-cosmic.dts b/arch/arm/boot/dts/vf610m4-cosmic.dts index 8944a2d2054c..f7474c11aabd 100644 --- a/arch/arm/boot/dts/vf610m4-cosmic.dts +++ b/arch/arm/boot/dts/vf610m4-cosmic.dts @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610m4.dtsi b/arch/arm/boot/dts/vf610m4.dtsi index 9f2c731839f2..1474bd34d0f1 100644 --- a/arch/arm/boot/dts/vf610m4.dtsi +++ b/arch/arm/boot/dts/vf610m4.dtsi @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index e9d28474c26a..5d654b5b4ce6 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 75055df1cda3..9b1b7be2ec0e 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -452,7 +452,7 @@ static int dmabounce_set_mask(struct device *dev, u64 dma_mask) return arm_dma_ops.set_dma_mask(dev, dma_mask); } -static struct dma_map_ops dmabounce_ops = { +static const struct dma_map_ops dmabounce_ops = { .alloc = arm_dma_alloc, .free = arm_dma_free, .mmap = arm_dma_mmap, diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig index ca39c04fec6b..d25010e3a0bc 100644 --- a/arch/arm/configs/aspeed_g4_defconfig +++ b/arch/arm/configs/aspeed_g4_defconfig @@ -25,26 +25,52 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_ASPEED=y CONFIG_MACH_ASPEED_G4=y -CONFIG_DEBUG_RODATA=y CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_SECCOMP=y -# CONFIG_ATAGS is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_KEXEC=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_INET=y +CONFIG_NET_NCSI=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_ALACRITECH is not set +# CONFIG_NET_VENDOR_AMAZON is not set +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_EZCHIP is not set +CONFIG_FTGMAC100=y +# CONFIG_NET_VENDOR_HISILICON is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NETRONOME is not set +# CONFIG_NET_VENDOR_QUALCOMM is not set +# CONFIG_NET_VENDOR_RENESAS is not set +# CONFIG_NET_VENDOR_ROCKER is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SOLARFLARE is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SYNOPSYS is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_WLAN is not set # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set # CONFIG_LEGACY_PTYS is not set -# CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_CONSOLE=y @@ -53,7 +79,10 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_ASPEED_BT_IPMI_BMC=y # CONFIG_HW_RANDOM is not set +CONFIG_GPIOLIB=y +CONFIG_GPIO_ASPEED=y # CONFIG_USB_SUPPORT is not set # CONFIG_IOMMU_SUPPORT is not set CONFIG_FIRMWARE_MEMMAP=y @@ -79,7 +108,8 @@ CONFIG_DEBUG_LL_UART_8250=y CONFIG_DEBUG_UART_PHYS=0x1e784000 CONFIG_DEBUG_UART_VIRT=0xe8784000 CONFIG_EARLY_PRINTK=y -CONFIG_DEBUG_SET_MODULE_RONX=y +CONFIG_STRICT_MODULE_RWX=y +CONFIG_STRICT_KERNEL_RWX=y # CONFIG_XZ_DEC_X86 is not set # CONFIG_XZ_DEC_POWERPC is not set # CONFIG_XZ_DEC_IA64 is not set diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig index 4f366b0370e9..5f660b02abd9 100644 --- a/arch/arm/configs/aspeed_g5_defconfig +++ b/arch/arm/configs/aspeed_g5_defconfig @@ -26,7 +26,7 @@ CONFIG_ARCH_MULTI_V6=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_ASPEED=y CONFIG_MACH_ASPEED_G5=y -CONFIG_DEBUG_RODATA=y +CONFIG_VMSPLIT_2G=y CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_SECCOMP=y @@ -37,15 +37,46 @@ CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_KEXEC=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_NET_NCSI=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_ALACRITECH is not set +# CONFIG_NET_VENDOR_AMAZON is not set +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_EZCHIP is not set +CONFIG_FTGMAC100=y +# CONFIG_NET_VENDOR_HISILICON is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NETRONOME is not set +# CONFIG_NET_VENDOR_QUALCOMM is not set +# CONFIG_NET_VENDOR_RENESAS is not set +# CONFIG_NET_VENDOR_ROCKER is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SOLARFLARE is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SYNOPSYS is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_WLAN is not set # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set # CONFIG_LEGACY_PTYS is not set -# CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_CONSOLE=y @@ -54,7 +85,10 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_ASPEED_BT_IPMI_BMC=y # CONFIG_HW_RANDOM is not set +CONFIG_GPIOLIB=y +CONFIG_GPIO_ASPEED=y # CONFIG_USB_SUPPORT is not set # CONFIG_IOMMU_SUPPORT is not set CONFIG_FIRMWARE_MEMMAP=y @@ -81,7 +115,9 @@ CONFIG_DEBUG_LL_UART_8250=y CONFIG_DEBUG_UART_PHYS=0x1e784000 CONFIG_DEBUG_UART_VIRT=0xe8784000 CONFIG_EARLY_PRINTK=y -CONFIG_DEBUG_SET_MODULE_RONX=y +CONFIG_STRICT_MODULE_RWX=y +CONFIG_STRICT_KERNEL_RWX=y +CONFIG_CRYPTO_ECHAINIV=y # CONFIG_XZ_DEC_X86 is not set # CONFIG_XZ_DEC_POWERPC is not set # CONFIG_XZ_DEC_IA64 is not set diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 8806754f7175..c8663eac9b1b 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -78,6 +78,8 @@ CONFIG_IDE=m CONFIG_BLK_DEV_PALMCHIP_BK3710=m CONFIG_SCSI=m CONFIG_BLK_DEV_SD=m +CONFIG_ATA=m +CONFIG_AHCI_DA850=m CONFIG_NETDEVICES=y CONFIG_NETCONSOLE=y CONFIG_TUN=m @@ -100,6 +102,7 @@ CONFIG_KEYBOARD_XTKBD=m # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_MISC=y +CONFIG_INPUT_PWM_BEEPER=m CONFIG_INPUT_DM355EVM=m CONFIG_SERIO_LIBPS2=y # CONFIG_VT_CONSOLE is not set @@ -114,6 +117,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_DAVINCI=y CONFIG_SPI=y CONFIG_SPI_DAVINCI=m +CONFIG_PINCTRL_DA850_PUPD=m CONFIG_PINCTRL_SINGLE=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PCA953X=y @@ -126,8 +130,15 @@ CONFIG_TPS6507X=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_TPS6507X=y +CONFIG_MEDIA_SUPPORT=m +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE=m +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_VIDEO_TVP514X=m CONFIG_DRM=m CONFIG_DRM_TILCDC=m +CONFIG_DRM_DUMB_VGA_DAC=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DA8XX=y @@ -192,6 +203,18 @@ CONFIG_TI_EDMA=y CONFIG_MEMORY=y CONFIG_TI_AEMIF=m CONFIG_DA8XX_DDRCTL=y +CONFIG_IIO=m +CONFIG_IIO_BUFFER=y +CONFIG_IIO_BUFFER_CB=m +CONFIG_IIO_KFIFO_BUF=m +CONFIG_IIO_TRIGGER=y +CONFIG_IIO_SW_DEVICE=m +CONFIG_IIO_SW_TRIGGER=m +CONFIG_IIO_HRTIMER_TRIGGER=m +CONFIG_IIO_SYSFS_TRIGGER=m +CONFIG_PWM=y +CONFIG_PWM_TIECAP=m +CONFIG_PWM_TIEHRPWM=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS_POSIX_ACL=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 79c415c33f69..742baf067e1c 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -24,7 +24,7 @@ CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m @@ -43,6 +43,7 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y +CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index ea316c4b890e..d3f1768840e2 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -64,8 +64,8 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CT_PROTO_SCTP=y +CONFIG_NF_CT_PROTO_UDPLITE=y CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig index 18e59feaa307..7f479cdb3479 100644 --- a/arch/arm/configs/imote2_defconfig +++ b/arch/arm/configs/imote2_defconfig @@ -56,8 +56,8 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CT_PROTO_SCTP=y +CONFIG_NF_CT_PROTO_UDPLITE=y CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index cbe7faf55245..eaba3b165d72 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -79,6 +79,7 @@ CONFIG_BT_HCIUART=y CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_LL=y CONFIG_CFG80211=y +CONFIG_CFG80211_WEXT=y CONFIG_MAC80211=y CONFIG_RFKILL=y CONFIG_RFKILL_INPUT=y @@ -174,7 +175,6 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_MMA8450=y CONFIG_SERIO_SERPORT=m # CONFIG_LEGACY_PTYS is not set -# CONFIG_DEVKMEM is not set CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_FSL_LPUART=y @@ -194,11 +194,11 @@ CONFIG_GPIO_SYSFS=y CONFIG_GPIO_MC9S08DZ60=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_STMPE=y -CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_IMX=y CONFIG_POWER_RESET_SYSCON=y CONFIG_POWER_RESET_SYSCON_POWEROFF=y +CONFIG_POWER_SUPPLY=y CONFIG_SENSORS_GPIO_FAN=y CONFIG_SENSORS_IIO_HWMON=y CONFIG_THERMAL=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index 78cd2f197e01..1331f6dc456a 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -126,6 +126,7 @@ CONFIG_MTD_NAND_DAVINCI=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y +CONFIG_SRAM=y CONFIG_EEPROM_AT24=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 361686a362f1..69a4bd13eea5 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -58,7 +58,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y CONFIG_ARM_KIRKWOOD_CPUIDLE=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index b01a43851294..a94126fb02c2 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -87,6 +87,8 @@ CONFIG_ARCH_EMEV2=y CONFIG_ARCH_R7S72100=y CONFIG_ARCH_R8A73A4=y CONFIG_ARCH_R8A7740=y +CONFIG_ARCH_R8A7743=y +CONFIG_ARCH_R8A7745=y CONFIG_ARCH_R8A7778=y CONFIG_ARCH_R8A7779=y CONFIG_ARCH_R8A7790=y @@ -132,7 +134,7 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_KEXEC=y CONFIG_EFI=y CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m @@ -253,7 +255,8 @@ CONFIG_R8169=y CONFIG_SH_ETH=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y -CONFIG_SYNOPSYS_DWC_ETH_QOS=y +CONFIG_STMMAC_PLATFORM=y +CONFIG_DWMAC_DWC_QOS_ETH=y CONFIG_TI_CPSW=y CONFIG_XILINX_EMACLITE=y CONFIG_AT803X_PHY=y @@ -296,7 +299,6 @@ CONFIG_TOUCHSCREEN_WM97XX=m CONFIG_INPUT_MISC=y CONFIG_INPUT_MAX77693_HAPTIC=m CONFIG_INPUT_MAX8997_HAPTIC=m -CONFIG_INPUT_MPU3050=y CONFIG_INPUT_AXP20X_PEK=m CONFIG_INPUT_ADXL34X=m CONFIG_SERIO_AMBAKMI=y @@ -471,7 +473,7 @@ CONFIG_MESON_WATCHDOG=y CONFIG_DW_WATCHDOG=y CONFIG_DIGICOLOR_WATCHDOG=y CONFIG_BCM2835_WDT=y -CONFIG_BCM47XX_WATCHDOG=y +CONFIG_BCM47XX_WDT=y CONFIG_BCM7038_WDT=m CONFIG_BCM_KONA_WDT=y CONFIG_MFD_ACT8945A=y @@ -569,6 +571,7 @@ CONFIG_VIDEO_SAMSUNG_S5P_MFC=m CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m CONFIG_VIDEO_STI_BDISP=m CONFIG_VIDEO_STI_HVA=m +CONFIG_VIDEO_STI_DELTA=m CONFIG_VIDEO_RENESAS_JPU=m CONFIG_VIDEO_RENESAS_VSP1=m CONFIG_V4L_TEST_DRIVERS=y @@ -824,6 +827,7 @@ CONFIG_QCOM_SMSM=y CONFIG_QCOM_WCNSS_CTRL=m CONFIG_ROCKCHIP_PM_DOMAINS=y CONFIG_COMMON_CLK_QCOM=y +CONFIG_QCOM_CLK_RPM=y CONFIG_CHROME_PLATFORMS=y CONFIG_STAGING_BOARD=y CONFIG_CROS_EC_CHARDEV=m @@ -847,15 +851,18 @@ CONFIG_MEMORY=y CONFIG_EXTCON=y CONFIG_TI_AEMIF=y CONFIG_IIO=y +CONFIG_IIO_SW_TRIGGER=y CONFIG_AT91_ADC=m CONFIG_AT91_SAMA5D2_ADC=m CONFIG_BERLIN2_ADC=m CONFIG_EXYNOS_ADC=m CONFIG_VF610_ADC=m CONFIG_XILINX_XADC=y +CONFIG_MPU3050_I2C=y CONFIG_CM36651=m CONFIG_AK8975=y CONFIG_RASPBERRYPI_POWER=y +CONFIG_IIO_HRTIMER_TRIGGER=y CONFIG_PWM=y CONFIG_PWM_ATMEL=m CONFIG_PWM_ATMEL_HLCDC_PWM=m @@ -893,7 +900,7 @@ CONFIG_BCM2835_MBOX=y CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_EFI_VARS=m CONFIG_EFI_CAPSULE_LOADER=m -CONFIG_CONFIG_BCM47XX_NVRAM=y +CONFIG_BCM47XX_NVRAM=y CONFIG_BCM47XX_SPROM=y CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y @@ -906,6 +913,10 @@ CONFIG_TMPFS=y CONFIG_SQUASHFS=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y +CONFIG_PSTORE=y +CONFIG_PSTORE_CONSOLE=y +CONFIG_PSTORE_PMSG=y +CONFIG_PSTORE_RAM=y CONFIG_NFS_FS=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y @@ -936,6 +947,9 @@ CONFIG_CRYPTO_SHA512_ARM=m CONFIG_CRYPTO_AES_ARM=m CONFIG_CRYPTO_AES_ARM_BS=m CONFIG_CRYPTO_AES_ARM_CE=m +CONFIG_CRYPTO_CHACHA20_NEON=m +CONFIG_CRYPTO_CRC32_ARM_CE=m +CONFIG_CRYPTO_CRCT10DIF_ARM_CE=m CONFIG_CRYPTO_GHASH_ARM_CE=m CONFIG_CRYPTO_DEV_ATMEL_AES=m CONFIG_CRYPTO_DEV_ATMEL_TDES=m diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig index f7f6039419aa..4b598da0d086 100644 --- a/arch/arm/configs/mvebu_v5_defconfig +++ b/arch/arm/configs/mvebu_v5_defconfig @@ -44,7 +44,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y CONFIG_ARM_KIRKWOOD_CPUIDLE=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 195c98b85568..f2462a6bdba6 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -137,7 +137,6 @@ CONFIG_BLK_DEV_RAM_SIZE=16384 CONFIG_SENSORS_TSL2550=m CONFIG_SRAM=y CONFIG_EEPROM_AT24=m -CONFIG_SENSORS_LIS3_I2C=m CONFIG_BLK_DEV_SD=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_ATA=y @@ -168,6 +167,7 @@ CONFIG_TI_CPTS=y # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set CONFIG_AT803X_PHY=y +CONFIG_MICREL_PHY=y CONFIG_SMSC_PHY=y CONFIG_USB_USBNET=m CONFIG_USB_NET_SMSC75XX=m @@ -213,6 +213,7 @@ CONFIG_SERIO=m CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y @@ -413,6 +414,7 @@ CONFIG_LEDS_TRIGGER_GPIO=m CONFIG_LEDS_TRIGGER_DEFAULT_ON=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=m +CONFIG_RTC_DRV_M41T80=m CONFIG_RTC_DRV_TWL92330=y CONFIG_RTC_DRV_TWL4030=m CONFIG_RTC_DRV_PALMAS=m @@ -426,6 +428,9 @@ CONFIG_EXTCON_PALMAS=m CONFIG_EXTCON_USB_GPIO=m CONFIG_TI_EMIF=m CONFIG_IIO=m +CONFIG_IIO_SW_DEVICE=m +CONFIG_IIO_SW_TRIGGER=m +CONFIG_IIO_ST_ACCEL_3AXIS=m CONFIG_TI_AM335X_ADC=m CONFIG_BMP280=m CONFIG_PWM=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index e4314b1227a3..2aac99fd1c41 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -97,7 +97,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/ram0 ro" CONFIG_KEXEC=y CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m @@ -334,7 +334,6 @@ CONFIG_TOUCHSCREEN_TOUCHIT213=m CONFIG_TOUCHSCREEN_PCAP=m CONFIG_TOUCHSCREEN_ST1232=m CONFIG_INPUT_MISC=y -CONFIG_INPUT_MPU3050=m CONFIG_INPUT_AXP20X_PEK=m CONFIG_INPUT_UINPUT=m CONFIG_INPUT_GPIO_ROTARY_ENCODER=m diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 8c3a0108a231..4ffdd607205d 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -24,6 +24,9 @@ CONFIG_ARCH_MSM8X60=y CONFIG_ARCH_MSM8960=y CONFIG_ARCH_MSM8974=y CONFIG_ARCH_MDM9615=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCIE_QCOM=y CONFIG_SMP=y CONFIG_HAVE_ARM_ARCH_TIMER=y CONFIG_PREEMPT=y @@ -55,6 +58,7 @@ CONFIG_CFG80211=y CONFIG_RFKILL=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_QCOM_EBI2=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y @@ -68,9 +72,14 @@ CONFIG_CHR_DEV_SCH=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_ATA=y +CONFIG_SATA_AHCI=y +CONFIG_SATA_AHCI_PLATFORM=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y +CONFIG_ATL1C=y CONFIG_KS8851=y +CONFIG_SMSC911X=y CONFIG_MDIO_BITBANG=y CONFIG_MDIO_GPIO=y CONFIG_SLIP=y @@ -118,6 +127,7 @@ CONFIG_CHARGER_QCOM_SMBB=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_MSM=y CONFIG_THERMAL=y +CONFIG_QCOM_TSENS=y CONFIG_MFD_PM8XXX=y CONFIG_MFD_QCOM_RPM=y CONFIG_MFD_SPMI_PMIC=y @@ -137,10 +147,16 @@ CONFIG_SND_SOC=y CONFIG_HID_BATTERY_STRENGTH=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_OTG=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MSM=y CONFIG_USB_ACM=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_SERIAL=y +CONFIG_USB_MSM_OTG=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_VBUS_DRAW=500 @@ -151,12 +167,20 @@ CONFIG_MMC_QCOM_DML=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_MSM=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PM8058=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PM8XXX=y CONFIG_DMADEVICES=y CONFIG_QCOM_BAM_DMA=y CONFIG_STAGING=y CONFIG_COMMON_CLK_QCOM=y +CONFIG_QCOM_CLK_RPM=y +CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_APQ_MMCC_8084=y CONFIG_IPQ_LCC_806X=y CONFIG_MSM_GCC_8660=y @@ -171,8 +195,18 @@ CONFIG_QCOM_PM=y CONFIG_QCOM_SMEM=y CONFIG_QCOM_SMD=y CONFIG_QCOM_SMD_RPM=y +CONFIG_IIO=y +CONFIG_IIO_BUFFER_CB=y +CONFIG_IIO_SW_TRIGGER=y +CONFIG_KXSD9=y +CONFIG_MPU3050_I2C=y +CONFIG_AK8975=y +CONFIG_IIO_HRTIMER_TRIGGER=y +CONFIG_BMP280=y CONFIG_PHY_QCOM_APQ8064_SATA=y CONFIG_PHY_QCOM_IPQ806X_SATA=y +CONFIG_NVMEM=y +CONFIG_QCOM_QFPROM=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT3_FS=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 4364040ed696..1e6c48dd7b11 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -86,9 +86,9 @@ CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_DCCP=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CT_PROTO_DCCP=y +CONFIG_NF_CT_PROTO_SCTP=y +CONFIG_NF_CT_PROTO_UDPLITE=y CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig index fa989902236d..c51f0f02012b 100644 --- a/arch/arm/configs/s5pv210_defconfig +++ b/arch/arm/configs/s5pv210_defconfig @@ -9,10 +9,6 @@ CONFIG_ARCH_S5PV210=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_S3C_DEV_FB=y CONFIG_S5PV210_SETUP_FB_24BPP=y -CONFIG_MACH_AQUILA=y -CONFIG_MACH_GONI=y -CONFIG_MACH_SMDKC110=y -CONFIG_MACH_SMDKV210=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_VMSPLIT_2G=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index aca8625b6fc9..777c9e986425 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -131,7 +131,7 @@ CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY=y CONFIG_BATTERY_ACT8945A=y CONFIG_POWER_RESET=y -# CONFIG_HWMON is not set +CONFIG_SENSORS_JC42=m CONFIG_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_SAMA5D4_WATCHDOG=y @@ -142,6 +142,7 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_ACT8865=y CONFIG_REGULATOR_ACT8945A=y +CONFIG_REGULATOR_PWM=m CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y @@ -164,6 +165,7 @@ CONFIG_SND_ATMEL_SOC=y CONFIG_SND_ATMEL_SOC_WM8904=y # CONFIG_HID_GENERIC is not set CONFIG_SND_ATMEL_SOC_PDMIC=y +CONFIG_SND_ATMEL_SOC_TSE850_PCM5142=m CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_EHCI_HCD=y @@ -199,6 +201,9 @@ CONFIG_AT_XDMAC=y CONFIG_IIO=y CONFIG_AT91_ADC=y CONFIG_AT91_SAMA5D2_ADC=y +CONFIG_ENVELOPE_DETECTOR=m +CONFIG_DPOT_DAC=m +CONFIG_MCP4531=m CONFIG_PWM=y CONFIG_PWM_ATMEL=y CONFIG_PWM_ATMEL_HLCDC_PWM=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 1b0f8ae36fb3..3c66a422fb4d 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -14,6 +14,8 @@ CONFIG_ARCH_EMEV2=y CONFIG_ARCH_R7S72100=y CONFIG_ARCH_R8A73A4=y CONFIG_ARCH_R8A7740=y +CONFIG_ARCH_R8A7743=y +CONFIG_ARCH_R8A7745=y CONFIG_ARCH_R8A7778=y CONFIG_ARCH_R8A7779=y CONFIG_ARCH_R8A7790=y @@ -33,12 +35,13 @@ CONFIG_HAVE_ARM_ARCH_TIMER=y CONFIG_NR_CPUS=8 CONFIG_AEABI=y CONFIG_HIGHMEM=y +CONFIG_CMA=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_KEXEC=y CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y @@ -58,6 +61,8 @@ CONFIG_CAN_RCAR=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=64 CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y @@ -145,6 +150,7 @@ CONFIG_VIDEO_RENESAS_JPU=y CONFIG_VIDEO_RENESAS_VSP1=y # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_ADV7180=y +CONFIG_VIDEO_ADV7604=y CONFIG_VIDEO_ML86V7667=y CONFIG_DRM=y CONFIG_DRM_I2C_ADV7511=y diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig index 2e1d254e06a2..030264c98eec 100644 --- a/arch/arm/configs/socfpga_defconfig +++ b/arch/arm/configs/socfpga_defconfig @@ -52,14 +52,20 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_DENALI_DT=y CONFIG_MTD_SPI_NOR=y CONFIG_SPI_CADENCE_QUADSPI=y CONFIG_OF_OVERLAY=y +CONFIG_OF_CONFIGFS=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=2 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_NVME=m CONFIG_SRAM=y +CONFIG_EEPROM_AT24=y CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y @@ -69,6 +75,7 @@ CONFIG_E1000E=m CONFIG_IGB=m CONFIG_IXGBE=m CONFIG_STMMAC_ETH=y +CONFIG_MARVELL_PHY=y CONFIG_MICREL_PHY=y CONFIG_INPUT_EVDEV=y CONFIG_INPUT_TOUCHSCREEN=y @@ -84,14 +91,22 @@ CONFIG_SERIAL_8250_DW=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_SPI=y +CONFIG_SPI_DESIGNWARE=y +CONFIG_SPI_DW_MMIO=y +CONFIG_SPI_SPIDEV=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_ALTERA=y CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_ALTERA_A10SR=y +CONFIG_SENSORS_MAX1619=y CONFIG_PMBUS=y CONFIG_SENSORS_LTC2978=y CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_WATCHDOG=y CONFIG_DW_WATCHDOG=y +CONFIG_MFD_ALTERA_A10SR=y CONFIG_MFD_STMPE=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y @@ -102,6 +117,14 @@ CONFIG_NOP_USB_XCEIV=y CONFIG_USB_GADGET=y CONFIG_MMC=y CONFIG_MMC_DW=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=y CONFIG_DMADEVICES=y CONFIG_PL330_DMA=y CONFIG_DMATEST=m @@ -121,9 +144,10 @@ CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y CONFIG_NTFS_RW=y CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y +CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3_ACL=y @@ -135,5 +159,5 @@ CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_SCHED_DEBUG is not set -CONFIG_ENABLE_DEFAULT_TRACERS=y +CONFIG_FUNCTION_TRACER=y CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig index 5a72d694662f..a9d8e3c9b487 100644 --- a/arch/arm/configs/stm32_defconfig +++ b/arch/arm/configs/stm32_defconfig @@ -48,14 +48,21 @@ CONFIG_SERIAL_STM32=y CONFIG_SERIAL_STM32_CONSOLE=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y # CONFIG_USB_SUPPORT is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_STM32=y CONFIG_DMADEVICES=y CONFIG_STM32_DMA=y +CONFIG_IIO=y +CONFIG_STM32_ADC_CORE=y +CONFIG_STM32_ADC=y # CONFIG_FILE_LOCKING is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY_USER is not set diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index dfeee5c51b40..da92c25eb7cc 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -83,6 +83,7 @@ CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY=y CONFIG_AXP20X_POWER=y CONFIG_THERMAL=y +CONFIG_THERMAL_OF=y CONFIG_CPU_THERMAL=y CONFIG_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y diff --git a/arch/arm/configs/tango4_defconfig b/arch/arm/configs/tango4_defconfig new file mode 100644 index 000000000000..68725d4eae45 --- /dev/null +++ b/arch/arm/configs/tango4_defconfig @@ -0,0 +1,94 @@ +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_ARCH_TANGO=y +# CONFIG_ARM_ERRATA_643719 is not set +CONFIG_SMP=y +CONFIG_PREEMPT=y +CONFIG_HZ_300=y +CONFIG_AEABI=y +CONFIG_HIGHMEM=y +# CONFIG_ATAGS is not set +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPUFREQ_DT=y +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_IPV6 is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_MTD=y +CONFIG_MTD_TESTS=m +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_TANGO=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +CONFIG_NET_VENDOR_AURORA=y +CONFIG_AURORA_NB8800=y +CONFIG_AT803X_PHY=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_RT288X=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_XLR=y +CONFIG_GPIOLIB=y +CONFIG_THERMAL=y +CONFIG_CPU_THERMAL=y +CONFIG_TANGO_THERMAL=y +CONFIG_WATCHDOG=y +CONFIG_TANGOX_WATCHDOG=y +CONFIG_FB=y +# CONFIG_HID is not set +# CONFIG_USB_HID is not set +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_ARASAN=y +CONFIG_DMADEVICES=y +CONFIG_EXT4_FS=y +CONFIG_FUSE_FS=m +CONFIG_VFAT_FS=m +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V2 is not set +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_UTF8=m +CONFIG_PRINTK_TIME=y +# CONFIG_CRYPTO_ECHAINIV is not set diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 844eeef5a509..f0efc854b5a2 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -120,7 +120,6 @@ CONFIG_TOUCHSCREEN_WM97XX=y # CONFIG_TOUCHSCREEN_WM9713 is not set CONFIG_TOUCHSCREEN_STMPE=y CONFIG_INPUT_MISC=y -CONFIG_INPUT_MPU3050=y # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y @@ -263,6 +262,7 @@ CONFIG_ARCH_TEGRA_114_SOC=y CONFIG_ARCH_TEGRA_124_SOC=y CONFIG_MEMORY=y CONFIG_IIO=y +CONFIG_MPU3050_I2C=y CONFIG_AK8975=y CONFIG_PWM=y CONFIG_PWM_TEGRA=y diff --git a/arch/arm/configs/vf610m4_defconfig b/arch/arm/configs/vf610m4_defconfig index aeb2482c492e..b7ecb83a95b6 100644 --- a/arch/arm/configs/vf610m4_defconfig +++ b/arch/arm/configs/vf610m4_defconfig @@ -7,7 +7,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y # CONFIG_MMU is not set -CONFIG_ARM_SINGLE_ARMV7M=y CONFIG_ARCH_MXC=y CONFIG_SOC_VF610=y CONFIG_SET_MEM_PARAM=y @@ -38,5 +37,5 @@ CONFIG_SERIAL_FSL_LPUART_CONSOLE=y CONFIG_MFD_SYSCON=y # CONFIG_HID is not set # CONFIG_USB_SUPPORT is not set +CONFIG_EXT4_FS=y # CONFIG_MISC_FILESYSTEMS is not set -# CONFIG_FTRACE is not set diff --git a/arch/arm/crypto/Kconfig b/arch/arm/crypto/Kconfig index 13f1b4c289d4..a8fce93137fb 100644 --- a/arch/arm/crypto/Kconfig +++ b/arch/arm/crypto/Kconfig @@ -62,35 +62,18 @@ config CRYPTO_SHA512_ARM using optimized ARM assembler and NEON, when available. config CRYPTO_AES_ARM - tristate "AES cipher algorithms (ARM-asm)" - depends on ARM + tristate "Scalar AES cipher for ARM" select CRYPTO_ALGAPI select CRYPTO_AES help Use optimized AES assembler routines for ARM platforms. - AES cipher algorithms (FIPS-197). AES uses the Rijndael - algorithm. - - Rijndael appears to be consistently a very good performer in - both hardware and software across a wide range of computing - environments regardless of its use in feedback or non-feedback - modes. Its key setup time is excellent, and its key agility is - good. Rijndael's very low memory requirements make it very well - suited for restricted-space environments, in which it also - demonstrates excellent performance. Rijndael's operations are - among the easiest to defend against power and timing attacks. - - The AES specifies three key sizes: 128, 192 and 256 bits - - See <http://csrc.nist.gov/encryption/aes/> for more information. - config CRYPTO_AES_ARM_BS tristate "Bit sliced AES using NEON instructions" depends on KERNEL_MODE_NEON - select CRYPTO_AES_ARM select CRYPTO_BLKCIPHER select CRYPTO_SIMD + select CRYPTO_AES_ARM help Use a faster and more secure NEON based implementation of AES in CBC, CTR and XTS modes @@ -130,4 +113,10 @@ config CRYPTO_CRC32_ARM_CE depends on KERNEL_MODE_NEON && CRC32 select CRYPTO_HASH +config CRYPTO_CHACHA20_NEON + tristate "NEON accelerated ChaCha20 symmetric cipher" + depends on KERNEL_MODE_NEON + select CRYPTO_BLKCIPHER + select CRYPTO_CHACHA20 + endif diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile index b578a1820ab1..1822c4697278 100644 --- a/arch/arm/crypto/Makefile +++ b/arch/arm/crypto/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha512-arm.o +obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha20-neon.o ce-obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o ce-obj-$(CONFIG_CRYPTO_SHA1_ARM_CE) += sha1-arm-ce.o @@ -26,8 +27,8 @@ $(warning $(ce-obj-y) $(ce-obj-m)) endif endif -aes-arm-y := aes-armv4.o aes_glue.o -aes-arm-bs-y := aesbs-core.o aesbs-glue.o +aes-arm-y := aes-cipher-core.o aes-cipher-glue.o +aes-arm-bs-y := aes-neonbs-core.o aes-neonbs-glue.o sha1-arm-y := sha1-armv4-large.o sha1_glue.o sha1-arm-neon-y := sha1-armv7-neon.o sha1_neon_glue.o sha256-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha256_neon_glue.o @@ -40,17 +41,15 @@ aes-arm-ce-y := aes-ce-core.o aes-ce-glue.o ghash-arm-ce-y := ghash-ce-core.o ghash-ce-glue.o crct10dif-arm-ce-y := crct10dif-ce-core.o crct10dif-ce-glue.o crc32-arm-ce-y:= crc32-ce-core.o crc32-ce-glue.o +chacha20-neon-y := chacha20-neon-core.o chacha20-neon-glue.o quiet_cmd_perl = PERL $@ cmd_perl = $(PERL) $(<) > $(@) -$(src)/aesbs-core.S_shipped: $(src)/bsaes-armv7.pl - $(call cmd,perl) - $(src)/sha256-core.S_shipped: $(src)/sha256-armv4.pl $(call cmd,perl) $(src)/sha512-core.S_shipped: $(src)/sha512-armv4.pl $(call cmd,perl) -.PRECIOUS: $(obj)/aesbs-core.S $(obj)/sha256-core.S $(obj)/sha512-core.S +.PRECIOUS: $(obj)/sha256-core.S $(obj)/sha512-core.S diff --git a/arch/arm/crypto/aes-armv4.S b/arch/arm/crypto/aes-armv4.S deleted file mode 100644 index ebb9761fb572..000000000000 --- a/arch/arm/crypto/aes-armv4.S +++ /dev/null @@ -1,1089 +0,0 @@ -#define __ARM_ARCH__ __LINUX_ARM_ARCH__ -@ ==================================================================== -@ Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -@ project. The module is, however, dual licensed under OpenSSL and -@ CRYPTOGAMS licenses depending on where you obtain it. For further -@ details see http://www.openssl.org/~appro/cryptogams/. -@ ==================================================================== - -@ AES for ARMv4 - -@ January 2007. -@ -@ Code uses single 1K S-box and is >2 times faster than code generated -@ by gcc-3.4.1. This is thanks to unique feature of ARMv4 ISA, which -@ allows to merge logical or arithmetic operation with shift or rotate -@ in one instruction and emit combined result every cycle. The module -@ is endian-neutral. The performance is ~42 cycles/byte for 128-bit -@ key [on single-issue Xscale PXA250 core]. - -@ May 2007. -@ -@ AES_set_[en|de]crypt_key is added. - -@ July 2010. -@ -@ Rescheduling for dual-issue pipeline resulted in 12% improvement on -@ Cortex A8 core and ~25 cycles per byte processed with 128-bit key. - -@ February 2011. -@ -@ Profiler-assisted and platform-specific optimization resulted in 16% -@ improvement on Cortex A8 core and ~21.5 cycles per byte. - -@ A little glue here to select the correct code below for the ARM CPU -@ that is being targetted. - -#include <linux/linkage.h> -#include <asm/assembler.h> - -.text - -.type AES_Te,%object -.align 5 -AES_Te: -.word 0xc66363a5, 0xf87c7c84, 0xee777799, 0xf67b7b8d -.word 0xfff2f20d, 0xd66b6bbd, 0xde6f6fb1, 0x91c5c554 -.word 0x60303050, 0x02010103, 0xce6767a9, 0x562b2b7d -.word 0xe7fefe19, 0xb5d7d762, 0x4dababe6, 0xec76769a -.word 0x8fcaca45, 0x1f82829d, 0x89c9c940, 0xfa7d7d87 -.word 0xeffafa15, 0xb25959eb, 0x8e4747c9, 0xfbf0f00b -.word 0x41adadec, 0xb3d4d467, 0x5fa2a2fd, 0x45afafea -.word 0x239c9cbf, 0x53a4a4f7, 0xe4727296, 0x9bc0c05b -.word 0x75b7b7c2, 0xe1fdfd1c, 0x3d9393ae, 0x4c26266a -.word 0x6c36365a, 0x7e3f3f41, 0xf5f7f702, 0x83cccc4f -.word 0x6834345c, 0x51a5a5f4, 0xd1e5e534, 0xf9f1f108 -.word 0xe2717193, 0xabd8d873, 0x62313153, 0x2a15153f -.word 0x0804040c, 0x95c7c752, 0x46232365, 0x9dc3c35e -.word 0x30181828, 0x379696a1, 0x0a05050f, 0x2f9a9ab5 -.word 0x0e070709, 0x24121236, 0x1b80809b, 0xdfe2e23d -.word 0xcdebeb26, 0x4e272769, 0x7fb2b2cd, 0xea75759f -.word 0x1209091b, 0x1d83839e, 0x582c2c74, 0x341a1a2e -.word 0x361b1b2d, 0xdc6e6eb2, 0xb45a5aee, 0x5ba0a0fb -.word 0xa45252f6, 0x763b3b4d, 0xb7d6d661, 0x7db3b3ce -.word 0x5229297b, 0xdde3e33e, 0x5e2f2f71, 0x13848497 -.word 0xa65353f5, 0xb9d1d168, 0x00000000, 0xc1eded2c -.word 0x40202060, 0xe3fcfc1f, 0x79b1b1c8, 0xb65b5bed -.word 0xd46a6abe, 0x8dcbcb46, 0x67bebed9, 0x7239394b -.word 0x944a4ade, 0x984c4cd4, 0xb05858e8, 0x85cfcf4a -.word 0xbbd0d06b, 0xc5efef2a, 0x4faaaae5, 0xedfbfb16 -.word 0x864343c5, 0x9a4d4dd7, 0x66333355, 0x11858594 -.word 0x8a4545cf, 0xe9f9f910, 0x04020206, 0xfe7f7f81 -.word 0xa05050f0, 0x783c3c44, 0x259f9fba, 0x4ba8a8e3 -.word 0xa25151f3, 0x5da3a3fe, 0x804040c0, 0x058f8f8a -.word 0x3f9292ad, 0x219d9dbc, 0x70383848, 0xf1f5f504 -.word 0x63bcbcdf, 0x77b6b6c1, 0xafdada75, 0x42212163 -.word 0x20101030, 0xe5ffff1a, 0xfdf3f30e, 0xbfd2d26d -.word 0x81cdcd4c, 0x180c0c14, 0x26131335, 0xc3ecec2f -.word 0xbe5f5fe1, 0x359797a2, 0x884444cc, 0x2e171739 -.word 0x93c4c457, 0x55a7a7f2, 0xfc7e7e82, 0x7a3d3d47 -.word 0xc86464ac, 0xba5d5de7, 0x3219192b, 0xe6737395 -.word 0xc06060a0, 0x19818198, 0x9e4f4fd1, 0xa3dcdc7f -.word 0x44222266, 0x542a2a7e, 0x3b9090ab, 0x0b888883 -.word 0x8c4646ca, 0xc7eeee29, 0x6bb8b8d3, 0x2814143c -.word 0xa7dede79, 0xbc5e5ee2, 0x160b0b1d, 0xaddbdb76 -.word 0xdbe0e03b, 0x64323256, 0x743a3a4e, 0x140a0a1e -.word 0x924949db, 0x0c06060a, 0x4824246c, 0xb85c5ce4 -.word 0x9fc2c25d, 0xbdd3d36e, 0x43acacef, 0xc46262a6 -.word 0x399191a8, 0x319595a4, 0xd3e4e437, 0xf279798b -.word 0xd5e7e732, 0x8bc8c843, 0x6e373759, 0xda6d6db7 -.word 0x018d8d8c, 0xb1d5d564, 0x9c4e4ed2, 0x49a9a9e0 -.word 0xd86c6cb4, 0xac5656fa, 0xf3f4f407, 0xcfeaea25 -.word 0xca6565af, 0xf47a7a8e, 0x47aeaee9, 0x10080818 -.word 0x6fbabad5, 0xf0787888, 0x4a25256f, 0x5c2e2e72 -.word 0x381c1c24, 0x57a6a6f1, 0x73b4b4c7, 0x97c6c651 -.word 0xcbe8e823, 0xa1dddd7c, 0xe874749c, 0x3e1f1f21 -.word 0x964b4bdd, 0x61bdbddc, 0x0d8b8b86, 0x0f8a8a85 -.word 0xe0707090, 0x7c3e3e42, 0x71b5b5c4, 0xcc6666aa -.word 0x904848d8, 0x06030305, 0xf7f6f601, 0x1c0e0e12 -.word 0xc26161a3, 0x6a35355f, 0xae5757f9, 0x69b9b9d0 -.word 0x17868691, 0x99c1c158, 0x3a1d1d27, 0x279e9eb9 -.word 0xd9e1e138, 0xebf8f813, 0x2b9898b3, 0x22111133 -.word 0xd26969bb, 0xa9d9d970, 0x078e8e89, 0x339494a7 -.word 0x2d9b9bb6, 0x3c1e1e22, 0x15878792, 0xc9e9e920 -.word 0x87cece49, 0xaa5555ff, 0x50282878, 0xa5dfdf7a -.word 0x038c8c8f, 0x59a1a1f8, 0x09898980, 0x1a0d0d17 -.word 0x65bfbfda, 0xd7e6e631, 0x844242c6, 0xd06868b8 -.word 0x824141c3, 0x299999b0, 0x5a2d2d77, 0x1e0f0f11 -.word 0x7bb0b0cb, 0xa85454fc, 0x6dbbbbd6, 0x2c16163a -@ Te4[256] -.byte 0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5 -.byte 0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76 -.byte 0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0 -.byte 0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0 -.byte 0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc -.byte 0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15 -.byte 0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a -.byte 0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75 -.byte 0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0 -.byte 0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84 -.byte 0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b -.byte 0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf -.byte 0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85 -.byte 0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8 -.byte 0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5 -.byte 0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2 -.byte 0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17 -.byte 0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73 -.byte 0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88 -.byte 0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb -.byte 0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c -.byte 0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79 -.byte 0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9 -.byte 0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08 -.byte 0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6 -.byte 0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a -.byte 0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e -.byte 0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e -.byte 0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94 -.byte 0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf -.byte 0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68 -.byte 0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16 -@ rcon[] -.word 0x01000000, 0x02000000, 0x04000000, 0x08000000 -.word 0x10000000, 0x20000000, 0x40000000, 0x80000000 -.word 0x1B000000, 0x36000000, 0, 0, 0, 0, 0, 0 -.size AES_Te,.-AES_Te - -@ void AES_encrypt(const unsigned char *in, unsigned char *out, -@ const AES_KEY *key) { -.align 5 -ENTRY(AES_encrypt) - adr r3,AES_encrypt - stmdb sp!,{r1,r4-r12,lr} - mov r12,r0 @ inp - mov r11,r2 - sub r10,r3,#AES_encrypt-AES_Te @ Te -#if __ARM_ARCH__<7 - ldrb r0,[r12,#3] @ load input data in endian-neutral - ldrb r4,[r12,#2] @ manner... - ldrb r5,[r12,#1] - ldrb r6,[r12,#0] - orr r0,r0,r4,lsl#8 - ldrb r1,[r12,#7] - orr r0,r0,r5,lsl#16 - ldrb r4,[r12,#6] - orr r0,r0,r6,lsl#24 - ldrb r5,[r12,#5] - ldrb r6,[r12,#4] - orr r1,r1,r4,lsl#8 - ldrb r2,[r12,#11] - orr r1,r1,r5,lsl#16 - ldrb r4,[r12,#10] - orr r1,r1,r6,lsl#24 - ldrb r5,[r12,#9] - ldrb r6,[r12,#8] - orr r2,r2,r4,lsl#8 - ldrb r3,[r12,#15] - orr r2,r2,r5,lsl#16 - ldrb r4,[r12,#14] - orr r2,r2,r6,lsl#24 - ldrb r5,[r12,#13] - ldrb r6,[r12,#12] - orr r3,r3,r4,lsl#8 - orr r3,r3,r5,lsl#16 - orr r3,r3,r6,lsl#24 -#else - ldr r0,[r12,#0] - ldr r1,[r12,#4] - ldr r2,[r12,#8] - ldr r3,[r12,#12] -#ifdef __ARMEL__ - rev r0,r0 - rev r1,r1 - rev r2,r2 - rev r3,r3 -#endif -#endif - bl _armv4_AES_encrypt - - ldr r12,[sp],#4 @ pop out -#if __ARM_ARCH__>=7 -#ifdef __ARMEL__ - rev r0,r0 - rev r1,r1 - rev r2,r2 - rev r3,r3 -#endif - str r0,[r12,#0] - str r1,[r12,#4] - str r2,[r12,#8] - str r3,[r12,#12] -#else - mov r4,r0,lsr#24 @ write output in endian-neutral - mov r5,r0,lsr#16 @ manner... - mov r6,r0,lsr#8 - strb r4,[r12,#0] - strb r5,[r12,#1] - mov r4,r1,lsr#24 - strb r6,[r12,#2] - mov r5,r1,lsr#16 - strb r0,[r12,#3] - mov r6,r1,lsr#8 - strb r4,[r12,#4] - strb r5,[r12,#5] - mov r4,r2,lsr#24 - strb r6,[r12,#6] - mov r5,r2,lsr#16 - strb r1,[r12,#7] - mov r6,r2,lsr#8 - strb r4,[r12,#8] - strb r5,[r12,#9] - mov r4,r3,lsr#24 - strb r6,[r12,#10] - mov r5,r3,lsr#16 - strb r2,[r12,#11] - mov r6,r3,lsr#8 - strb r4,[r12,#12] - strb r5,[r12,#13] - strb r6,[r12,#14] - strb r3,[r12,#15] -#endif - ldmia sp!,{r4-r12,pc} -ENDPROC(AES_encrypt) - -.type _armv4_AES_encrypt,%function -.align 2 -_armv4_AES_encrypt: - str lr,[sp,#-4]! @ push lr - ldmia r11!,{r4-r7} - eor r0,r0,r4 - ldr r12,[r11,#240-16] - eor r1,r1,r5 - eor r2,r2,r6 - eor r3,r3,r7 - sub r12,r12,#1 - mov lr,#255 - - and r7,lr,r0 - and r8,lr,r0,lsr#8 - and r9,lr,r0,lsr#16 - mov r0,r0,lsr#24 -.Lenc_loop: - ldr r4,[r10,r7,lsl#2] @ Te3[s0>>0] - and r7,lr,r1,lsr#16 @ i0 - ldr r5,[r10,r8,lsl#2] @ Te2[s0>>8] - and r8,lr,r1 - ldr r6,[r10,r9,lsl#2] @ Te1[s0>>16] - and r9,lr,r1,lsr#8 - ldr r0,[r10,r0,lsl#2] @ Te0[s0>>24] - mov r1,r1,lsr#24 - - ldr r7,[r10,r7,lsl#2] @ Te1[s1>>16] - ldr r8,[r10,r8,lsl#2] @ Te3[s1>>0] - ldr r9,[r10,r9,lsl#2] @ Te2[s1>>8] - eor r0,r0,r7,ror#8 - ldr r1,[r10,r1,lsl#2] @ Te0[s1>>24] - and r7,lr,r2,lsr#8 @ i0 - eor r5,r5,r8,ror#8 - and r8,lr,r2,lsr#16 @ i1 - eor r6,r6,r9,ror#8 - and r9,lr,r2 - ldr r7,[r10,r7,lsl#2] @ Te2[s2>>8] - eor r1,r1,r4,ror#24 - ldr r8,[r10,r8,lsl#2] @ Te1[s2>>16] - mov r2,r2,lsr#24 - - ldr r9,[r10,r9,lsl#2] @ Te3[s2>>0] - eor r0,r0,r7,ror#16 - ldr r2,[r10,r2,lsl#2] @ Te0[s2>>24] - and r7,lr,r3 @ i0 - eor r1,r1,r8,ror#8 - and r8,lr,r3,lsr#8 @ i1 - eor r6,r6,r9,ror#16 - and r9,lr,r3,lsr#16 @ i2 - ldr r7,[r10,r7,lsl#2] @ Te3[s3>>0] - eor r2,r2,r5,ror#16 - ldr r8,[r10,r8,lsl#2] @ Te2[s3>>8] - mov r3,r3,lsr#24 - - ldr r9,[r10,r9,lsl#2] @ Te1[s3>>16] - eor r0,r0,r7,ror#24 - ldr r7,[r11],#16 - eor r1,r1,r8,ror#16 - ldr r3,[r10,r3,lsl#2] @ Te0[s3>>24] - eor r2,r2,r9,ror#8 - ldr r4,[r11,#-12] - eor r3,r3,r6,ror#8 - - ldr r5,[r11,#-8] - eor r0,r0,r7 - ldr r6,[r11,#-4] - and r7,lr,r0 - eor r1,r1,r4 - and r8,lr,r0,lsr#8 - eor r2,r2,r5 - and r9,lr,r0,lsr#16 - eor r3,r3,r6 - mov r0,r0,lsr#24 - - subs r12,r12,#1 - bne .Lenc_loop - - add r10,r10,#2 - - ldrb r4,[r10,r7,lsl#2] @ Te4[s0>>0] - and r7,lr,r1,lsr#16 @ i0 - ldrb r5,[r10,r8,lsl#2] @ Te4[s0>>8] - and r8,lr,r1 - ldrb r6,[r10,r9,lsl#2] @ Te4[s0>>16] - and r9,lr,r1,lsr#8 - ldrb r0,[r10,r0,lsl#2] @ Te4[s0>>24] - mov r1,r1,lsr#24 - - ldrb r7,[r10,r7,lsl#2] @ Te4[s1>>16] - ldrb r8,[r10,r8,lsl#2] @ Te4[s1>>0] - ldrb r9,[r10,r9,lsl#2] @ Te4[s1>>8] - eor r0,r7,r0,lsl#8 - ldrb r1,[r10,r1,lsl#2] @ Te4[s1>>24] - and r7,lr,r2,lsr#8 @ i0 - eor r5,r8,r5,lsl#8 - and r8,lr,r2,lsr#16 @ i1 - eor r6,r9,r6,lsl#8 - and r9,lr,r2 - ldrb r7,[r10,r7,lsl#2] @ Te4[s2>>8] - eor r1,r4,r1,lsl#24 - ldrb r8,[r10,r8,lsl#2] @ Te4[s2>>16] - mov r2,r2,lsr#24 - - ldrb r9,[r10,r9,lsl#2] @ Te4[s2>>0] - eor r0,r7,r0,lsl#8 - ldrb r2,[r10,r2,lsl#2] @ Te4[s2>>24] - and r7,lr,r3 @ i0 - eor r1,r1,r8,lsl#16 - and r8,lr,r3,lsr#8 @ i1 - eor r6,r9,r6,lsl#8 - and r9,lr,r3,lsr#16 @ i2 - ldrb r7,[r10,r7,lsl#2] @ Te4[s3>>0] - eor r2,r5,r2,lsl#24 - ldrb r8,[r10,r8,lsl#2] @ Te4[s3>>8] - mov r3,r3,lsr#24 - - ldrb r9,[r10,r9,lsl#2] @ Te4[s3>>16] - eor r0,r7,r0,lsl#8 - ldr r7,[r11,#0] - ldrb r3,[r10,r3,lsl#2] @ Te4[s3>>24] - eor r1,r1,r8,lsl#8 - ldr r4,[r11,#4] - eor r2,r2,r9,lsl#16 - ldr r5,[r11,#8] - eor r3,r6,r3,lsl#24 - ldr r6,[r11,#12] - - eor r0,r0,r7 - eor r1,r1,r4 - eor r2,r2,r5 - eor r3,r3,r6 - - sub r10,r10,#2 - ldr pc,[sp],#4 @ pop and return -.size _armv4_AES_encrypt,.-_armv4_AES_encrypt - -.align 5 -ENTRY(private_AES_set_encrypt_key) -_armv4_AES_set_encrypt_key: - adr r3,_armv4_AES_set_encrypt_key - teq r0,#0 - moveq r0,#-1 - beq .Labrt - teq r2,#0 - moveq r0,#-1 - beq .Labrt - - teq r1,#128 - beq .Lok - teq r1,#192 - beq .Lok - teq r1,#256 - movne r0,#-1 - bne .Labrt - -.Lok: stmdb sp!,{r4-r12,lr} - sub r10,r3,#_armv4_AES_set_encrypt_key-AES_Te-1024 @ Te4 - - mov r12,r0 @ inp - mov lr,r1 @ bits - mov r11,r2 @ key - -#if __ARM_ARCH__<7 - ldrb r0,[r12,#3] @ load input data in endian-neutral - ldrb r4,[r12,#2] @ manner... - ldrb r5,[r12,#1] - ldrb r6,[r12,#0] - orr r0,r0,r4,lsl#8 - ldrb r1,[r12,#7] - orr r0,r0,r5,lsl#16 - ldrb r4,[r12,#6] - orr r0,r0,r6,lsl#24 - ldrb r5,[r12,#5] - ldrb r6,[r12,#4] - orr r1,r1,r4,lsl#8 - ldrb r2,[r12,#11] - orr r1,r1,r5,lsl#16 - ldrb r4,[r12,#10] - orr r1,r1,r6,lsl#24 - ldrb r5,[r12,#9] - ldrb r6,[r12,#8] - orr r2,r2,r4,lsl#8 - ldrb r3,[r12,#15] - orr r2,r2,r5,lsl#16 - ldrb r4,[r12,#14] - orr r2,r2,r6,lsl#24 - ldrb r5,[r12,#13] - ldrb r6,[r12,#12] - orr r3,r3,r4,lsl#8 - str r0,[r11],#16 - orr r3,r3,r5,lsl#16 - str r1,[r11,#-12] - orr r3,r3,r6,lsl#24 - str r2,[r11,#-8] - str r3,[r11,#-4] -#else - ldr r0,[r12,#0] - ldr r1,[r12,#4] - ldr r2,[r12,#8] - ldr r3,[r12,#12] -#ifdef __ARMEL__ - rev r0,r0 - rev r1,r1 - rev r2,r2 - rev r3,r3 -#endif - str r0,[r11],#16 - str r1,[r11,#-12] - str r2,[r11,#-8] - str r3,[r11,#-4] -#endif - - teq lr,#128 - bne .Lnot128 - mov r12,#10 - str r12,[r11,#240-16] - add r6,r10,#256 @ rcon - mov lr,#255 - -.L128_loop: - and r5,lr,r3,lsr#24 - and r7,lr,r3,lsr#16 - ldrb r5,[r10,r5] - and r8,lr,r3,lsr#8 - ldrb r7,[r10,r7] - and r9,lr,r3 - ldrb r8,[r10,r8] - orr r5,r5,r7,lsl#24 - ldrb r9,[r10,r9] - orr r5,r5,r8,lsl#16 - ldr r4,[r6],#4 @ rcon[i++] - orr r5,r5,r9,lsl#8 - eor r5,r5,r4 - eor r0,r0,r5 @ rk[4]=rk[0]^... - eor r1,r1,r0 @ rk[5]=rk[1]^rk[4] - str r0,[r11],#16 - eor r2,r2,r1 @ rk[6]=rk[2]^rk[5] - str r1,[r11,#-12] - eor r3,r3,r2 @ rk[7]=rk[3]^rk[6] - str r2,[r11,#-8] - subs r12,r12,#1 - str r3,[r11,#-4] - bne .L128_loop - sub r2,r11,#176 - b .Ldone - -.Lnot128: -#if __ARM_ARCH__<7 - ldrb r8,[r12,#19] - ldrb r4,[r12,#18] - ldrb r5,[r12,#17] - ldrb r6,[r12,#16] - orr r8,r8,r4,lsl#8 - ldrb r9,[r12,#23] - orr r8,r8,r5,lsl#16 - ldrb r4,[r12,#22] - orr r8,r8,r6,lsl#24 - ldrb r5,[r12,#21] - ldrb r6,[r12,#20] - orr r9,r9,r4,lsl#8 - orr r9,r9,r5,lsl#16 - str r8,[r11],#8 - orr r9,r9,r6,lsl#24 - str r9,[r11,#-4] -#else - ldr r8,[r12,#16] - ldr r9,[r12,#20] -#ifdef __ARMEL__ - rev r8,r8 - rev r9,r9 -#endif - str r8,[r11],#8 - str r9,[r11,#-4] -#endif - - teq lr,#192 - bne .Lnot192 - mov r12,#12 - str r12,[r11,#240-24] - add r6,r10,#256 @ rcon - mov lr,#255 - mov r12,#8 - -.L192_loop: - and r5,lr,r9,lsr#24 - and r7,lr,r9,lsr#16 - ldrb r5,[r10,r5] - and r8,lr,r9,lsr#8 - ldrb r7,[r10,r7] - and r9,lr,r9 - ldrb r8,[r10,r8] - orr r5,r5,r7,lsl#24 - ldrb r9,[r10,r9] - orr r5,r5,r8,lsl#16 - ldr r4,[r6],#4 @ rcon[i++] - orr r5,r5,r9,lsl#8 - eor r9,r5,r4 - eor r0,r0,r9 @ rk[6]=rk[0]^... - eor r1,r1,r0 @ rk[7]=rk[1]^rk[6] - str r0,[r11],#24 - eor r2,r2,r1 @ rk[8]=rk[2]^rk[7] - str r1,[r11,#-20] - eor r3,r3,r2 @ rk[9]=rk[3]^rk[8] - str r2,[r11,#-16] - subs r12,r12,#1 - str r3,[r11,#-12] - subeq r2,r11,#216 - beq .Ldone - - ldr r7,[r11,#-32] - ldr r8,[r11,#-28] - eor r7,r7,r3 @ rk[10]=rk[4]^rk[9] - eor r9,r8,r7 @ rk[11]=rk[5]^rk[10] - str r7,[r11,#-8] - str r9,[r11,#-4] - b .L192_loop - -.Lnot192: -#if __ARM_ARCH__<7 - ldrb r8,[r12,#27] - ldrb r4,[r12,#26] - ldrb r5,[r12,#25] - ldrb r6,[r12,#24] - orr r8,r8,r4,lsl#8 - ldrb r9,[r12,#31] - orr r8,r8,r5,lsl#16 - ldrb r4,[r12,#30] - orr r8,r8,r6,lsl#24 - ldrb r5,[r12,#29] - ldrb r6,[r12,#28] - orr r9,r9,r4,lsl#8 - orr r9,r9,r5,lsl#16 - str r8,[r11],#8 - orr r9,r9,r6,lsl#24 - str r9,[r11,#-4] -#else - ldr r8,[r12,#24] - ldr r9,[r12,#28] -#ifdef __ARMEL__ - rev r8,r8 - rev r9,r9 -#endif - str r8,[r11],#8 - str r9,[r11,#-4] -#endif - - mov r12,#14 - str r12,[r11,#240-32] - add r6,r10,#256 @ rcon - mov lr,#255 - mov r12,#7 - -.L256_loop: - and r5,lr,r9,lsr#24 - and r7,lr,r9,lsr#16 - ldrb r5,[r10,r5] - and r8,lr,r9,lsr#8 - ldrb r7,[r10,r7] - and r9,lr,r9 - ldrb r8,[r10,r8] - orr r5,r5,r7,lsl#24 - ldrb r9,[r10,r9] - orr r5,r5,r8,lsl#16 - ldr r4,[r6],#4 @ rcon[i++] - orr r5,r5,r9,lsl#8 - eor r9,r5,r4 - eor r0,r0,r9 @ rk[8]=rk[0]^... - eor r1,r1,r0 @ rk[9]=rk[1]^rk[8] - str r0,[r11],#32 - eor r2,r2,r1 @ rk[10]=rk[2]^rk[9] - str r1,[r11,#-28] - eor r3,r3,r2 @ rk[11]=rk[3]^rk[10] - str r2,[r11,#-24] - subs r12,r12,#1 - str r3,[r11,#-20] - subeq r2,r11,#256 - beq .Ldone - - and r5,lr,r3 - and r7,lr,r3,lsr#8 - ldrb r5,[r10,r5] - and r8,lr,r3,lsr#16 - ldrb r7,[r10,r7] - and r9,lr,r3,lsr#24 - ldrb r8,[r10,r8] - orr r5,r5,r7,lsl#8 - ldrb r9,[r10,r9] - orr r5,r5,r8,lsl#16 - ldr r4,[r11,#-48] - orr r5,r5,r9,lsl#24 - - ldr r7,[r11,#-44] - ldr r8,[r11,#-40] - eor r4,r4,r5 @ rk[12]=rk[4]^... - ldr r9,[r11,#-36] - eor r7,r7,r4 @ rk[13]=rk[5]^rk[12] - str r4,[r11,#-16] - eor r8,r8,r7 @ rk[14]=rk[6]^rk[13] - str r7,[r11,#-12] - eor r9,r9,r8 @ rk[15]=rk[7]^rk[14] - str r8,[r11,#-8] - str r9,[r11,#-4] - b .L256_loop - -.Ldone: mov r0,#0 - ldmia sp!,{r4-r12,lr} -.Labrt: ret lr -ENDPROC(private_AES_set_encrypt_key) - -.align 5 -ENTRY(private_AES_set_decrypt_key) - str lr,[sp,#-4]! @ push lr -#if 0 - @ kernel does both of these in setkey so optimise this bit out by - @ expecting the key to already have the enc_key work done (see aes_glue.c) - bl _armv4_AES_set_encrypt_key -#else - mov r0,#0 -#endif - teq r0,#0 - ldrne lr,[sp],#4 @ pop lr - bne .Labrt - - stmdb sp!,{r4-r12} - - ldr r12,[r2,#240] @ AES_set_encrypt_key preserves r2, - mov r11,r2 @ which is AES_KEY *key - mov r7,r2 - add r8,r2,r12,lsl#4 - -.Linv: ldr r0,[r7] - ldr r1,[r7,#4] - ldr r2,[r7,#8] - ldr r3,[r7,#12] - ldr r4,[r8] - ldr r5,[r8,#4] - ldr r6,[r8,#8] - ldr r9,[r8,#12] - str r0,[r8],#-16 - str r1,[r8,#16+4] - str r2,[r8,#16+8] - str r3,[r8,#16+12] - str r4,[r7],#16 - str r5,[r7,#-12] - str r6,[r7,#-8] - str r9,[r7,#-4] - teq r7,r8 - bne .Linv - ldr r0,[r11,#16]! @ prefetch tp1 - mov r7,#0x80 - mov r8,#0x1b - orr r7,r7,#0x8000 - orr r8,r8,#0x1b00 - orr r7,r7,r7,lsl#16 - orr r8,r8,r8,lsl#16 - sub r12,r12,#1 - mvn r9,r7 - mov r12,r12,lsl#2 @ (rounds-1)*4 - -.Lmix: and r4,r0,r7 - and r1,r0,r9 - sub r4,r4,r4,lsr#7 - and r4,r4,r8 - eor r1,r4,r1,lsl#1 @ tp2 - - and r4,r1,r7 - and r2,r1,r9 - sub r4,r4,r4,lsr#7 - and r4,r4,r8 - eor r2,r4,r2,lsl#1 @ tp4 - - and r4,r2,r7 - and r3,r2,r9 - sub r4,r4,r4,lsr#7 - and r4,r4,r8 - eor r3,r4,r3,lsl#1 @ tp8 - - eor r4,r1,r2 - eor r5,r0,r3 @ tp9 - eor r4,r4,r3 @ tpe - eor r4,r4,r1,ror#24 - eor r4,r4,r5,ror#24 @ ^= ROTATE(tpb=tp9^tp2,8) - eor r4,r4,r2,ror#16 - eor r4,r4,r5,ror#16 @ ^= ROTATE(tpd=tp9^tp4,16) - eor r4,r4,r5,ror#8 @ ^= ROTATE(tp9,24) - - ldr r0,[r11,#4] @ prefetch tp1 - str r4,[r11],#4 - subs r12,r12,#1 - bne .Lmix - - mov r0,#0 - ldmia sp!,{r4-r12,pc} -ENDPROC(private_AES_set_decrypt_key) - -.type AES_Td,%object -.align 5 -AES_Td: -.word 0x51f4a750, 0x7e416553, 0x1a17a4c3, 0x3a275e96 -.word 0x3bab6bcb, 0x1f9d45f1, 0xacfa58ab, 0x4be30393 -.word 0x2030fa55, 0xad766df6, 0x88cc7691, 0xf5024c25 -.word 0x4fe5d7fc, 0xc52acbd7, 0x26354480, 0xb562a38f -.word 0xdeb15a49, 0x25ba1b67, 0x45ea0e98, 0x5dfec0e1 -.word 0xc32f7502, 0x814cf012, 0x8d4697a3, 0x6bd3f9c6 -.word 0x038f5fe7, 0x15929c95, 0xbf6d7aeb, 0x955259da -.word 0xd4be832d, 0x587421d3, 0x49e06929, 0x8ec9c844 -.word 0x75c2896a, 0xf48e7978, 0x99583e6b, 0x27b971dd -.word 0xbee14fb6, 0xf088ad17, 0xc920ac66, 0x7dce3ab4 -.word 0x63df4a18, 0xe51a3182, 0x97513360, 0x62537f45 -.word 0xb16477e0, 0xbb6bae84, 0xfe81a01c, 0xf9082b94 -.word 0x70486858, 0x8f45fd19, 0x94de6c87, 0x527bf8b7 -.word 0xab73d323, 0x724b02e2, 0xe31f8f57, 0x6655ab2a -.word 0xb2eb2807, 0x2fb5c203, 0x86c57b9a, 0xd33708a5 -.word 0x302887f2, 0x23bfa5b2, 0x02036aba, 0xed16825c -.word 0x8acf1c2b, 0xa779b492, 0xf307f2f0, 0x4e69e2a1 -.word 0x65daf4cd, 0x0605bed5, 0xd134621f, 0xc4a6fe8a -.word 0x342e539d, 0xa2f355a0, 0x058ae132, 0xa4f6eb75 -.word 0x0b83ec39, 0x4060efaa, 0x5e719f06, 0xbd6e1051 -.word 0x3e218af9, 0x96dd063d, 0xdd3e05ae, 0x4de6bd46 -.word 0x91548db5, 0x71c45d05, 0x0406d46f, 0x605015ff -.word 0x1998fb24, 0xd6bde997, 0x894043cc, 0x67d99e77 -.word 0xb0e842bd, 0x07898b88, 0xe7195b38, 0x79c8eedb -.word 0xa17c0a47, 0x7c420fe9, 0xf8841ec9, 0x00000000 -.word 0x09808683, 0x322bed48, 0x1e1170ac, 0x6c5a724e -.word 0xfd0efffb, 0x0f853856, 0x3daed51e, 0x362d3927 -.word 0x0a0fd964, 0x685ca621, 0x9b5b54d1, 0x24362e3a -.word 0x0c0a67b1, 0x9357e70f, 0xb4ee96d2, 0x1b9b919e -.word 0x80c0c54f, 0x61dc20a2, 0x5a774b69, 0x1c121a16 -.word 0xe293ba0a, 0xc0a02ae5, 0x3c22e043, 0x121b171d -.word 0x0e090d0b, 0xf28bc7ad, 0x2db6a8b9, 0x141ea9c8 -.word 0x57f11985, 0xaf75074c, 0xee99ddbb, 0xa37f60fd -.word 0xf701269f, 0x5c72f5bc, 0x44663bc5, 0x5bfb7e34 -.word 0x8b432976, 0xcb23c6dc, 0xb6edfc68, 0xb8e4f163 -.word 0xd731dcca, 0x42638510, 0x13972240, 0x84c61120 -.word 0x854a247d, 0xd2bb3df8, 0xaef93211, 0xc729a16d -.word 0x1d9e2f4b, 0xdcb230f3, 0x0d8652ec, 0x77c1e3d0 -.word 0x2bb3166c, 0xa970b999, 0x119448fa, 0x47e96422 -.word 0xa8fc8cc4, 0xa0f03f1a, 0x567d2cd8, 0x223390ef -.word 0x87494ec7, 0xd938d1c1, 0x8ccaa2fe, 0x98d40b36 -.word 0xa6f581cf, 0xa57ade28, 0xdab78e26, 0x3fadbfa4 -.word 0x2c3a9de4, 0x5078920d, 0x6a5fcc9b, 0x547e4662 -.word 0xf68d13c2, 0x90d8b8e8, 0x2e39f75e, 0x82c3aff5 -.word 0x9f5d80be, 0x69d0937c, 0x6fd52da9, 0xcf2512b3 -.word 0xc8ac993b, 0x10187da7, 0xe89c636e, 0xdb3bbb7b -.word 0xcd267809, 0x6e5918f4, 0xec9ab701, 0x834f9aa8 -.word 0xe6956e65, 0xaaffe67e, 0x21bccf08, 0xef15e8e6 -.word 0xbae79bd9, 0x4a6f36ce, 0xea9f09d4, 0x29b07cd6 -.word 0x31a4b2af, 0x2a3f2331, 0xc6a59430, 0x35a266c0 -.word 0x744ebc37, 0xfc82caa6, 0xe090d0b0, 0x33a7d815 -.word 0xf104984a, 0x41ecdaf7, 0x7fcd500e, 0x1791f62f -.word 0x764dd68d, 0x43efb04d, 0xccaa4d54, 0xe49604df -.word 0x9ed1b5e3, 0x4c6a881b, 0xc12c1fb8, 0x4665517f -.word 0x9d5eea04, 0x018c355d, 0xfa877473, 0xfb0b412e -.word 0xb3671d5a, 0x92dbd252, 0xe9105633, 0x6dd64713 -.word 0x9ad7618c, 0x37a10c7a, 0x59f8148e, 0xeb133c89 -.word 0xcea927ee, 0xb761c935, 0xe11ce5ed, 0x7a47b13c -.word 0x9cd2df59, 0x55f2733f, 0x1814ce79, 0x73c737bf -.word 0x53f7cdea, 0x5ffdaa5b, 0xdf3d6f14, 0x7844db86 -.word 0xcaaff381, 0xb968c43e, 0x3824342c, 0xc2a3405f -.word 0x161dc372, 0xbce2250c, 0x283c498b, 0xff0d9541 -.word 0x39a80171, 0x080cb3de, 0xd8b4e49c, 0x6456c190 -.word 0x7bcb8461, 0xd532b670, 0x486c5c74, 0xd0b85742 -@ Td4[256] -.byte 0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38 -.byte 0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb -.byte 0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87 -.byte 0x34, 0x8e, 0x43, 0x44, 0xc4, 0xde, 0xe9, 0xcb -.byte 0x54, 0x7b, 0x94, 0x32, 0xa6, 0xc2, 0x23, 0x3d -.byte 0xee, 0x4c, 0x95, 0x0b, 0x42, 0xfa, 0xc3, 0x4e -.byte 0x08, 0x2e, 0xa1, 0x66, 0x28, 0xd9, 0x24, 0xb2 -.byte 0x76, 0x5b, 0xa2, 0x49, 0x6d, 0x8b, 0xd1, 0x25 -.byte 0x72, 0xf8, 0xf6, 0x64, 0x86, 0x68, 0x98, 0x16 -.byte 0xd4, 0xa4, 0x5c, 0xcc, 0x5d, 0x65, 0xb6, 0x92 -.byte 0x6c, 0x70, 0x48, 0x50, 0xfd, 0xed, 0xb9, 0xda -.byte 0x5e, 0x15, 0x46, 0x57, 0xa7, 0x8d, 0x9d, 0x84 -.byte 0x90, 0xd8, 0xab, 0x00, 0x8c, 0xbc, 0xd3, 0x0a -.byte 0xf7, 0xe4, 0x58, 0x05, 0xb8, 0xb3, 0x45, 0x06 -.byte 0xd0, 0x2c, 0x1e, 0x8f, 0xca, 0x3f, 0x0f, 0x02 -.byte 0xc1, 0xaf, 0xbd, 0x03, 0x01, 0x13, 0x8a, 0x6b -.byte 0x3a, 0x91, 0x11, 0x41, 0x4f, 0x67, 0xdc, 0xea -.byte 0x97, 0xf2, 0xcf, 0xce, 0xf0, 0xb4, 0xe6, 0x73 -.byte 0x96, 0xac, 0x74, 0x22, 0xe7, 0xad, 0x35, 0x85 -.byte 0xe2, 0xf9, 0x37, 0xe8, 0x1c, 0x75, 0xdf, 0x6e -.byte 0x47, 0xf1, 0x1a, 0x71, 0x1d, 0x29, 0xc5, 0x89 -.byte 0x6f, 0xb7, 0x62, 0x0e, 0xaa, 0x18, 0xbe, 0x1b -.byte 0xfc, 0x56, 0x3e, 0x4b, 0xc6, 0xd2, 0x79, 0x20 -.byte 0x9a, 0xdb, 0xc0, 0xfe, 0x78, 0xcd, 0x5a, 0xf4 -.byte 0x1f, 0xdd, 0xa8, 0x33, 0x88, 0x07, 0xc7, 0x31 -.byte 0xb1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xec, 0x5f -.byte 0x60, 0x51, 0x7f, 0xa9, 0x19, 0xb5, 0x4a, 0x0d -.byte 0x2d, 0xe5, 0x7a, 0x9f, 0x93, 0xc9, 0x9c, 0xef -.byte 0xa0, 0xe0, 0x3b, 0x4d, 0xae, 0x2a, 0xf5, 0xb0 -.byte 0xc8, 0xeb, 0xbb, 0x3c, 0x83, 0x53, 0x99, 0x61 -.byte 0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26 -.byte 0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d -.size AES_Td,.-AES_Td - -@ void AES_decrypt(const unsigned char *in, unsigned char *out, -@ const AES_KEY *key) { -.align 5 -ENTRY(AES_decrypt) - adr r3,AES_decrypt - stmdb sp!,{r1,r4-r12,lr} - mov r12,r0 @ inp - mov r11,r2 - sub r10,r3,#AES_decrypt-AES_Td @ Td -#if __ARM_ARCH__<7 - ldrb r0,[r12,#3] @ load input data in endian-neutral - ldrb r4,[r12,#2] @ manner... - ldrb r5,[r12,#1] - ldrb r6,[r12,#0] - orr r0,r0,r4,lsl#8 - ldrb r1,[r12,#7] - orr r0,r0,r5,lsl#16 - ldrb r4,[r12,#6] - orr r0,r0,r6,lsl#24 - ldrb r5,[r12,#5] - ldrb r6,[r12,#4] - orr r1,r1,r4,lsl#8 - ldrb r2,[r12,#11] - orr r1,r1,r5,lsl#16 - ldrb r4,[r12,#10] - orr r1,r1,r6,lsl#24 - ldrb r5,[r12,#9] - ldrb r6,[r12,#8] - orr r2,r2,r4,lsl#8 - ldrb r3,[r12,#15] - orr r2,r2,r5,lsl#16 - ldrb r4,[r12,#14] - orr r2,r2,r6,lsl#24 - ldrb r5,[r12,#13] - ldrb r6,[r12,#12] - orr r3,r3,r4,lsl#8 - orr r3,r3,r5,lsl#16 - orr r3,r3,r6,lsl#24 -#else - ldr r0,[r12,#0] - ldr r1,[r12,#4] - ldr r2,[r12,#8] - ldr r3,[r12,#12] -#ifdef __ARMEL__ - rev r0,r0 - rev r1,r1 - rev r2,r2 - rev r3,r3 -#endif -#endif - bl _armv4_AES_decrypt - - ldr r12,[sp],#4 @ pop out -#if __ARM_ARCH__>=7 -#ifdef __ARMEL__ - rev r0,r0 - rev r1,r1 - rev r2,r2 - rev r3,r3 -#endif - str r0,[r12,#0] - str r1,[r12,#4] - str r2,[r12,#8] - str r3,[r12,#12] -#else - mov r4,r0,lsr#24 @ write output in endian-neutral - mov r5,r0,lsr#16 @ manner... - mov r6,r0,lsr#8 - strb r4,[r12,#0] - strb r5,[r12,#1] - mov r4,r1,lsr#24 - strb r6,[r12,#2] - mov r5,r1,lsr#16 - strb r0,[r12,#3] - mov r6,r1,lsr#8 - strb r4,[r12,#4] - strb r5,[r12,#5] - mov r4,r2,lsr#24 - strb r6,[r12,#6] - mov r5,r2,lsr#16 - strb r1,[r12,#7] - mov r6,r2,lsr#8 - strb r4,[r12,#8] - strb r5,[r12,#9] - mov r4,r3,lsr#24 - strb r6,[r12,#10] - mov r5,r3,lsr#16 - strb r2,[r12,#11] - mov r6,r3,lsr#8 - strb r4,[r12,#12] - strb r5,[r12,#13] - strb r6,[r12,#14] - strb r3,[r12,#15] -#endif - ldmia sp!,{r4-r12,pc} -ENDPROC(AES_decrypt) - -.type _armv4_AES_decrypt,%function -.align 2 -_armv4_AES_decrypt: - str lr,[sp,#-4]! @ push lr - ldmia r11!,{r4-r7} - eor r0,r0,r4 - ldr r12,[r11,#240-16] - eor r1,r1,r5 - eor r2,r2,r6 - eor r3,r3,r7 - sub r12,r12,#1 - mov lr,#255 - - and r7,lr,r0,lsr#16 - and r8,lr,r0,lsr#8 - and r9,lr,r0 - mov r0,r0,lsr#24 -.Ldec_loop: - ldr r4,[r10,r7,lsl#2] @ Td1[s0>>16] - and r7,lr,r1 @ i0 - ldr r5,[r10,r8,lsl#2] @ Td2[s0>>8] - and r8,lr,r1,lsr#16 - ldr r6,[r10,r9,lsl#2] @ Td3[s0>>0] - and r9,lr,r1,lsr#8 - ldr r0,[r10,r0,lsl#2] @ Td0[s0>>24] - mov r1,r1,lsr#24 - - ldr r7,[r10,r7,lsl#2] @ Td3[s1>>0] - ldr r8,[r10,r8,lsl#2] @ Td1[s1>>16] - ldr r9,[r10,r9,lsl#2] @ Td2[s1>>8] - eor r0,r0,r7,ror#24 - ldr r1,[r10,r1,lsl#2] @ Td0[s1>>24] - and r7,lr,r2,lsr#8 @ i0 - eor r5,r8,r5,ror#8 - and r8,lr,r2 @ i1 - eor r6,r9,r6,ror#8 - and r9,lr,r2,lsr#16 - ldr r7,[r10,r7,lsl#2] @ Td2[s2>>8] - eor r1,r1,r4,ror#8 - ldr r8,[r10,r8,lsl#2] @ Td3[s2>>0] - mov r2,r2,lsr#24 - - ldr r9,[r10,r9,lsl#2] @ Td1[s2>>16] - eor r0,r0,r7,ror#16 - ldr r2,[r10,r2,lsl#2] @ Td0[s2>>24] - and r7,lr,r3,lsr#16 @ i0 - eor r1,r1,r8,ror#24 - and r8,lr,r3,lsr#8 @ i1 - eor r6,r9,r6,ror#8 - and r9,lr,r3 @ i2 - ldr r7,[r10,r7,lsl#2] @ Td1[s3>>16] - eor r2,r2,r5,ror#8 - ldr r8,[r10,r8,lsl#2] @ Td2[s3>>8] - mov r3,r3,lsr#24 - - ldr r9,[r10,r9,lsl#2] @ Td3[s3>>0] - eor r0,r0,r7,ror#8 - ldr r7,[r11],#16 - eor r1,r1,r8,ror#16 - ldr r3,[r10,r3,lsl#2] @ Td0[s3>>24] - eor r2,r2,r9,ror#24 - - ldr r4,[r11,#-12] - eor r0,r0,r7 - ldr r5,[r11,#-8] - eor r3,r3,r6,ror#8 - ldr r6,[r11,#-4] - and r7,lr,r0,lsr#16 - eor r1,r1,r4 - and r8,lr,r0,lsr#8 - eor r2,r2,r5 - and r9,lr,r0 - eor r3,r3,r6 - mov r0,r0,lsr#24 - - subs r12,r12,#1 - bne .Ldec_loop - - add r10,r10,#1024 - - ldr r5,[r10,#0] @ prefetch Td4 - ldr r6,[r10,#32] - ldr r4,[r10,#64] - ldr r5,[r10,#96] - ldr r6,[r10,#128] - ldr r4,[r10,#160] - ldr r5,[r10,#192] - ldr r6,[r10,#224] - - ldrb r0,[r10,r0] @ Td4[s0>>24] - ldrb r4,[r10,r7] @ Td4[s0>>16] - and r7,lr,r1 @ i0 - ldrb r5,[r10,r8] @ Td4[s0>>8] - and r8,lr,r1,lsr#16 - ldrb r6,[r10,r9] @ Td4[s0>>0] - and r9,lr,r1,lsr#8 - - ldrb r7,[r10,r7] @ Td4[s1>>0] - ARM( ldrb r1,[r10,r1,lsr#24] ) @ Td4[s1>>24] - THUMB( add r1,r10,r1,lsr#24 ) @ Td4[s1>>24] - THUMB( ldrb r1,[r1] ) - ldrb r8,[r10,r8] @ Td4[s1>>16] - eor r0,r7,r0,lsl#24 - ldrb r9,[r10,r9] @ Td4[s1>>8] - eor r1,r4,r1,lsl#8 - and r7,lr,r2,lsr#8 @ i0 - eor r5,r5,r8,lsl#8 - and r8,lr,r2 @ i1 - ldrb r7,[r10,r7] @ Td4[s2>>8] - eor r6,r6,r9,lsl#8 - ldrb r8,[r10,r8] @ Td4[s2>>0] - and r9,lr,r2,lsr#16 - - ARM( ldrb r2,[r10,r2,lsr#24] ) @ Td4[s2>>24] - THUMB( add r2,r10,r2,lsr#24 ) @ Td4[s2>>24] - THUMB( ldrb r2,[r2] ) - eor r0,r0,r7,lsl#8 - ldrb r9,[r10,r9] @ Td4[s2>>16] - eor r1,r8,r1,lsl#16 - and r7,lr,r3,lsr#16 @ i0 - eor r2,r5,r2,lsl#16 - and r8,lr,r3,lsr#8 @ i1 - ldrb r7,[r10,r7] @ Td4[s3>>16] - eor r6,r6,r9,lsl#16 - ldrb r8,[r10,r8] @ Td4[s3>>8] - and r9,lr,r3 @ i2 - - ldrb r9,[r10,r9] @ Td4[s3>>0] - ARM( ldrb r3,[r10,r3,lsr#24] ) @ Td4[s3>>24] - THUMB( add r3,r10,r3,lsr#24 ) @ Td4[s3>>24] - THUMB( ldrb r3,[r3] ) - eor r0,r0,r7,lsl#16 - ldr r7,[r11,#0] - eor r1,r1,r8,lsl#8 - ldr r4,[r11,#4] - eor r2,r9,r2,lsl#8 - ldr r5,[r11,#8] - eor r3,r6,r3,lsl#24 - ldr r6,[r11,#12] - - eor r0,r0,r7 - eor r1,r1,r4 - eor r2,r2,r5 - eor r3,r3,r6 - - sub r10,r10,#1024 - ldr pc,[sp],#4 @ pop and return -.size _armv4_AES_decrypt,.-_armv4_AES_decrypt -.asciz "AES for ARMv4, CRYPTOGAMS by <appro@openssl.org>" -.align 2 diff --git a/arch/arm/crypto/aes-ce-core.S b/arch/arm/crypto/aes-ce-core.S index 987aa632c9f0..ba8e6a32fdc9 100644 --- a/arch/arm/crypto/aes-ce-core.S +++ b/arch/arm/crypto/aes-ce-core.S @@ -169,19 +169,19 @@ ENTRY(ce_aes_ecb_encrypt) .Lecbencloop3x: subs r4, r4, #3 bmi .Lecbenc1x - vld1.8 {q0-q1}, [r1, :64]! - vld1.8 {q2}, [r1, :64]! + vld1.8 {q0-q1}, [r1]! + vld1.8 {q2}, [r1]! bl aes_encrypt_3x - vst1.8 {q0-q1}, [r0, :64]! - vst1.8 {q2}, [r0, :64]! + vst1.8 {q0-q1}, [r0]! + vst1.8 {q2}, [r0]! b .Lecbencloop3x .Lecbenc1x: adds r4, r4, #3 beq .Lecbencout .Lecbencloop: - vld1.8 {q0}, [r1, :64]! + vld1.8 {q0}, [r1]! bl aes_encrypt - vst1.8 {q0}, [r0, :64]! + vst1.8 {q0}, [r0]! subs r4, r4, #1 bne .Lecbencloop .Lecbencout: @@ -195,19 +195,19 @@ ENTRY(ce_aes_ecb_decrypt) .Lecbdecloop3x: subs r4, r4, #3 bmi .Lecbdec1x - vld1.8 {q0-q1}, [r1, :64]! - vld1.8 {q2}, [r1, :64]! + vld1.8 {q0-q1}, [r1]! + vld1.8 {q2}, [r1]! bl aes_decrypt_3x - vst1.8 {q0-q1}, [r0, :64]! - vst1.8 {q2}, [r0, :64]! + vst1.8 {q0-q1}, [r0]! + vst1.8 {q2}, [r0]! b .Lecbdecloop3x .Lecbdec1x: adds r4, r4, #3 beq .Lecbdecout .Lecbdecloop: - vld1.8 {q0}, [r1, :64]! + vld1.8 {q0}, [r1]! bl aes_decrypt - vst1.8 {q0}, [r0, :64]! + vst1.8 {q0}, [r0]! subs r4, r4, #1 bne .Lecbdecloop .Lecbdecout: @@ -226,10 +226,10 @@ ENTRY(ce_aes_cbc_encrypt) vld1.8 {q0}, [r5] prepare_key r2, r3 .Lcbcencloop: - vld1.8 {q1}, [r1, :64]! @ get next pt block + vld1.8 {q1}, [r1]! @ get next pt block veor q0, q0, q1 @ ..and xor with iv bl aes_encrypt - vst1.8 {q0}, [r0, :64]! + vst1.8 {q0}, [r0]! subs r4, r4, #1 bne .Lcbcencloop vst1.8 {q0}, [r5] @@ -244,8 +244,8 @@ ENTRY(ce_aes_cbc_decrypt) .Lcbcdecloop3x: subs r4, r4, #3 bmi .Lcbcdec1x - vld1.8 {q0-q1}, [r1, :64]! - vld1.8 {q2}, [r1, :64]! + vld1.8 {q0-q1}, [r1]! + vld1.8 {q2}, [r1]! vmov q3, q0 vmov q4, q1 vmov q5, q2 @@ -254,19 +254,19 @@ ENTRY(ce_aes_cbc_decrypt) veor q1, q1, q3 veor q2, q2, q4 vmov q6, q5 - vst1.8 {q0-q1}, [r0, :64]! - vst1.8 {q2}, [r0, :64]! + vst1.8 {q0-q1}, [r0]! + vst1.8 {q2}, [r0]! b .Lcbcdecloop3x .Lcbcdec1x: adds r4, r4, #3 beq .Lcbcdecout vmov q15, q14 @ preserve last round key .Lcbcdecloop: - vld1.8 {q0}, [r1, :64]! @ get next ct block + vld1.8 {q0}, [r1]! @ get next ct block veor q14, q15, q6 @ combine prev ct with last key vmov q6, q0 bl aes_decrypt - vst1.8 {q0}, [r0, :64]! + vst1.8 {q0}, [r0]! subs r4, r4, #1 bne .Lcbcdecloop .Lcbcdecout: @@ -300,15 +300,15 @@ ENTRY(ce_aes_ctr_encrypt) rev ip, r6 add r6, r6, #1 vmov s11, ip - vld1.8 {q3-q4}, [r1, :64]! - vld1.8 {q5}, [r1, :64]! + vld1.8 {q3-q4}, [r1]! + vld1.8 {q5}, [r1]! bl aes_encrypt_3x veor q0, q0, q3 veor q1, q1, q4 veor q2, q2, q5 rev ip, r6 - vst1.8 {q0-q1}, [r0, :64]! - vst1.8 {q2}, [r0, :64]! + vst1.8 {q0-q1}, [r0]! + vst1.8 {q2}, [r0]! vmov s27, ip b .Lctrloop3x .Lctr1x: @@ -318,10 +318,10 @@ ENTRY(ce_aes_ctr_encrypt) vmov q0, q6 bl aes_encrypt subs r4, r4, #1 - bmi .Lctrhalfblock @ blocks < 0 means 1/2 block - vld1.8 {q3}, [r1, :64]! + bmi .Lctrtailblock @ blocks < 0 means tail block + vld1.8 {q3}, [r1]! veor q3, q0, q3 - vst1.8 {q3}, [r0, :64]! + vst1.8 {q3}, [r0]! adds r6, r6, #1 @ increment BE ctr rev ip, r6 @@ -333,10 +333,8 @@ ENTRY(ce_aes_ctr_encrypt) vst1.8 {q6}, [r5] pop {r4-r6, pc} -.Lctrhalfblock: - vld1.8 {d1}, [r1, :64] - veor d0, d0, d1 - vst1.8 {d0}, [r0, :64] +.Lctrtailblock: + vst1.8 {q0}, [r0, :64] @ return just the key stream pop {r4-r6, pc} .Lctrcarry: @@ -405,8 +403,8 @@ ENTRY(ce_aes_xts_encrypt) .Lxtsenc3x: subs r4, r4, #3 bmi .Lxtsenc1x - vld1.8 {q0-q1}, [r1, :64]! @ get 3 pt blocks - vld1.8 {q2}, [r1, :64]! + vld1.8 {q0-q1}, [r1]! @ get 3 pt blocks + vld1.8 {q2}, [r1]! next_tweak q4, q3, q7, q6 veor q0, q0, q3 next_tweak q5, q4, q7, q6 @@ -416,8 +414,8 @@ ENTRY(ce_aes_xts_encrypt) veor q0, q0, q3 veor q1, q1, q4 veor q2, q2, q5 - vst1.8 {q0-q1}, [r0, :64]! @ write 3 ct blocks - vst1.8 {q2}, [r0, :64]! + vst1.8 {q0-q1}, [r0]! @ write 3 ct blocks + vst1.8 {q2}, [r0]! vmov q3, q5 teq r4, #0 beq .Lxtsencout @@ -426,11 +424,11 @@ ENTRY(ce_aes_xts_encrypt) adds r4, r4, #3 beq .Lxtsencout .Lxtsencloop: - vld1.8 {q0}, [r1, :64]! + vld1.8 {q0}, [r1]! veor q0, q0, q3 bl aes_encrypt veor q0, q0, q3 - vst1.8 {q0}, [r0, :64]! + vst1.8 {q0}, [r0]! subs r4, r4, #1 beq .Lxtsencout next_tweak q3, q3, q7, q6 @@ -456,8 +454,8 @@ ENTRY(ce_aes_xts_decrypt) .Lxtsdec3x: subs r4, r4, #3 bmi .Lxtsdec1x - vld1.8 {q0-q1}, [r1, :64]! @ get 3 ct blocks - vld1.8 {q2}, [r1, :64]! + vld1.8 {q0-q1}, [r1]! @ get 3 ct blocks + vld1.8 {q2}, [r1]! next_tweak q4, q3, q7, q6 veor q0, q0, q3 next_tweak q5, q4, q7, q6 @@ -467,8 +465,8 @@ ENTRY(ce_aes_xts_decrypt) veor q0, q0, q3 veor q1, q1, q4 veor q2, q2, q5 - vst1.8 {q0-q1}, [r0, :64]! @ write 3 pt blocks - vst1.8 {q2}, [r0, :64]! + vst1.8 {q0-q1}, [r0]! @ write 3 pt blocks + vst1.8 {q2}, [r0]! vmov q3, q5 teq r4, #0 beq .Lxtsdecout @@ -477,12 +475,12 @@ ENTRY(ce_aes_xts_decrypt) adds r4, r4, #3 beq .Lxtsdecout .Lxtsdecloop: - vld1.8 {q0}, [r1, :64]! + vld1.8 {q0}, [r1]! veor q0, q0, q3 add ip, r2, #32 @ 3rd round key bl aes_decrypt veor q0, q0, q3 - vst1.8 {q0}, [r0, :64]! + vst1.8 {q0}, [r0]! subs r4, r4, #1 beq .Lxtsdecout next_tweak q3, q3, q7, q6 diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c index 8857531915bf..883b84d828c5 100644 --- a/arch/arm/crypto/aes-ce-glue.c +++ b/arch/arm/crypto/aes-ce-glue.c @@ -278,14 +278,15 @@ static int ctr_encrypt(struct skcipher_request *req) u8 *tsrc = walk.src.virt.addr; /* - * Minimum alignment is 8 bytes, so if nbytes is <= 8, we need - * to tell aes_ctr_encrypt() to only read half a block. + * Tell aes_ctr_encrypt() to process a tail block. */ - blocks = (nbytes <= 8) ? -1 : 1; + blocks = -1; - ce_aes_ctr_encrypt(tail, tsrc, (u8 *)ctx->key_enc, + ce_aes_ctr_encrypt(tail, NULL, (u8 *)ctx->key_enc, num_rounds(ctx), blocks, walk.iv); - memcpy(tdst, tail, nbytes); + if (tdst != tsrc) + memcpy(tdst, tsrc, nbytes); + crypto_xor(tdst, tail, nbytes); err = skcipher_walk_done(&walk, 0); } kernel_neon_end(); @@ -345,7 +346,6 @@ static struct skcipher_alg aes_algs[] = { { .cra_flags = CRYPTO_ALG_INTERNAL, .cra_blocksize = AES_BLOCK_SIZE, .cra_ctxsize = sizeof(struct crypto_aes_ctx), - .cra_alignmask = 7, .cra_module = THIS_MODULE, }, .min_keysize = AES_MIN_KEY_SIZE, @@ -361,7 +361,6 @@ static struct skcipher_alg aes_algs[] = { { .cra_flags = CRYPTO_ALG_INTERNAL, .cra_blocksize = AES_BLOCK_SIZE, .cra_ctxsize = sizeof(struct crypto_aes_ctx), - .cra_alignmask = 7, .cra_module = THIS_MODULE, }, .min_keysize = AES_MIN_KEY_SIZE, @@ -378,7 +377,6 @@ static struct skcipher_alg aes_algs[] = { { .cra_flags = CRYPTO_ALG_INTERNAL, .cra_blocksize = 1, .cra_ctxsize = sizeof(struct crypto_aes_ctx), - .cra_alignmask = 7, .cra_module = THIS_MODULE, }, .min_keysize = AES_MIN_KEY_SIZE, @@ -396,7 +394,6 @@ static struct skcipher_alg aes_algs[] = { { .cra_flags = CRYPTO_ALG_INTERNAL, .cra_blocksize = AES_BLOCK_SIZE, .cra_ctxsize = sizeof(struct crypto_aes_xts_ctx), - .cra_alignmask = 7, .cra_module = THIS_MODULE, }, .min_keysize = 2 * AES_MIN_KEY_SIZE, diff --git a/arch/arm/crypto/aes-cipher-core.S b/arch/arm/crypto/aes-cipher-core.S new file mode 100644 index 000000000000..c817a86c4ca8 --- /dev/null +++ b/arch/arm/crypto/aes-cipher-core.S @@ -0,0 +1,179 @@ +/* + * Scalar AES core transform + * + * Copyright (C) 2017 Linaro Ltd. + * Author: Ard Biesheuvel <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> + + .text + .align 5 + + rk .req r0 + rounds .req r1 + in .req r2 + out .req r3 + ttab .req ip + + t0 .req lr + t1 .req r2 + t2 .req r3 + + .macro __select, out, in, idx + .if __LINUX_ARM_ARCH__ < 7 + and \out, \in, #0xff << (8 * \idx) + .else + ubfx \out, \in, #(8 * \idx), #8 + .endif + .endm + + .macro __load, out, in, idx + .if __LINUX_ARM_ARCH__ < 7 && \idx > 0 + ldr \out, [ttab, \in, lsr #(8 * \idx) - 2] + .else + ldr \out, [ttab, \in, lsl #2] + .endif + .endm + + .macro __hround, out0, out1, in0, in1, in2, in3, t3, t4, enc + __select \out0, \in0, 0 + __select t0, \in1, 1 + __load \out0, \out0, 0 + __load t0, t0, 1 + + .if \enc + __select \out1, \in1, 0 + __select t1, \in2, 1 + .else + __select \out1, \in3, 0 + __select t1, \in0, 1 + .endif + __load \out1, \out1, 0 + __select t2, \in2, 2 + __load t1, t1, 1 + __load t2, t2, 2 + + eor \out0, \out0, t0, ror #24 + + __select t0, \in3, 3 + .if \enc + __select \t3, \in3, 2 + __select \t4, \in0, 3 + .else + __select \t3, \in1, 2 + __select \t4, \in2, 3 + .endif + __load \t3, \t3, 2 + __load t0, t0, 3 + __load \t4, \t4, 3 + + eor \out1, \out1, t1, ror #24 + eor \out0, \out0, t2, ror #16 + ldm rk!, {t1, t2} + eor \out1, \out1, \t3, ror #16 + eor \out0, \out0, t0, ror #8 + eor \out1, \out1, \t4, ror #8 + eor \out0, \out0, t1 + eor \out1, \out1, t2 + .endm + + .macro fround, out0, out1, out2, out3, in0, in1, in2, in3 + __hround \out0, \out1, \in0, \in1, \in2, \in3, \out2, \out3, 1 + __hround \out2, \out3, \in2, \in3, \in0, \in1, \in1, \in2, 1 + .endm + + .macro iround, out0, out1, out2, out3, in0, in1, in2, in3 + __hround \out0, \out1, \in0, \in3, \in2, \in1, \out2, \out3, 0 + __hround \out2, \out3, \in2, \in1, \in0, \in3, \in1, \in0, 0 + .endm + + .macro __rev, out, in + .if __LINUX_ARM_ARCH__ < 6 + lsl t0, \in, #24 + and t1, \in, #0xff00 + and t2, \in, #0xff0000 + orr \out, t0, \in, lsr #24 + orr \out, \out, t1, lsl #8 + orr \out, \out, t2, lsr #8 + .else + rev \out, \in + .endif + .endm + + .macro __adrl, out, sym, c + .if __LINUX_ARM_ARCH__ < 7 + ldr\c \out, =\sym + .else + movw\c \out, #:lower16:\sym + movt\c \out, #:upper16:\sym + .endif + .endm + + .macro do_crypt, round, ttab, ltab + push {r3-r11, lr} + + ldr r4, [in] + ldr r5, [in, #4] + ldr r6, [in, #8] + ldr r7, [in, #12] + + ldm rk!, {r8-r11} + +#ifdef CONFIG_CPU_BIG_ENDIAN + __rev r4, r4 + __rev r5, r5 + __rev r6, r6 + __rev r7, r7 +#endif + + eor r4, r4, r8 + eor r5, r5, r9 + eor r6, r6, r10 + eor r7, r7, r11 + + __adrl ttab, \ttab + + tst rounds, #2 + bne 1f + +0: \round r8, r9, r10, r11, r4, r5, r6, r7 + \round r4, r5, r6, r7, r8, r9, r10, r11 + +1: subs rounds, rounds, #4 + \round r8, r9, r10, r11, r4, r5, r6, r7 + __adrl ttab, \ltab, ls + \round r4, r5, r6, r7, r8, r9, r10, r11 + bhi 0b + +#ifdef CONFIG_CPU_BIG_ENDIAN + __rev r4, r4 + __rev r5, r5 + __rev r6, r6 + __rev r7, r7 +#endif + + ldr out, [sp] + + str r4, [out] + str r5, [out, #4] + str r6, [out, #8] + str r7, [out, #12] + + pop {r3-r11, pc} + + .align 3 + .ltorg + .endm + +ENTRY(__aes_arm_encrypt) + do_crypt fround, crypto_ft_tab, crypto_fl_tab +ENDPROC(__aes_arm_encrypt) + +ENTRY(__aes_arm_decrypt) + do_crypt iround, crypto_it_tab, crypto_il_tab +ENDPROC(__aes_arm_decrypt) diff --git a/arch/arm/crypto/aes-cipher-glue.c b/arch/arm/crypto/aes-cipher-glue.c new file mode 100644 index 000000000000..c222f6e072ad --- /dev/null +++ b/arch/arm/crypto/aes-cipher-glue.c @@ -0,0 +1,74 @@ +/* + * Scalar AES core transform + * + * Copyright (C) 2017 Linaro Ltd. + * Author: Ard Biesheuvel <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <crypto/aes.h> +#include <linux/crypto.h> +#include <linux/module.h> + +asmlinkage void __aes_arm_encrypt(u32 *rk, int rounds, const u8 *in, u8 *out); +EXPORT_SYMBOL(__aes_arm_encrypt); + +asmlinkage void __aes_arm_decrypt(u32 *rk, int rounds, const u8 *in, u8 *out); +EXPORT_SYMBOL(__aes_arm_decrypt); + +static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) +{ + struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm); + int rounds = 6 + ctx->key_length / 4; + + __aes_arm_encrypt(ctx->key_enc, rounds, in, out); +} + +static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) +{ + struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm); + int rounds = 6 + ctx->key_length / 4; + + __aes_arm_decrypt(ctx->key_dec, rounds, in, out); +} + +static struct crypto_alg aes_alg = { + .cra_name = "aes", + .cra_driver_name = "aes-arm", + .cra_priority = 200, + .cra_flags = CRYPTO_ALG_TYPE_CIPHER, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_ctx), + .cra_module = THIS_MODULE, + + .cra_cipher.cia_min_keysize = AES_MIN_KEY_SIZE, + .cra_cipher.cia_max_keysize = AES_MAX_KEY_SIZE, + .cra_cipher.cia_setkey = crypto_aes_set_key, + .cra_cipher.cia_encrypt = aes_encrypt, + .cra_cipher.cia_decrypt = aes_decrypt, + +#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS + .cra_alignmask = 3, +#endif +}; + +static int __init aes_init(void) +{ + return crypto_register_alg(&aes_alg); +} + +static void __exit aes_fini(void) +{ + crypto_unregister_alg(&aes_alg); +} + +module_init(aes_init); +module_exit(aes_fini); + +MODULE_DESCRIPTION("Scalar AES cipher for ARM"); +MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CRYPTO("aes"); diff --git a/arch/arm/crypto/aes-neonbs-core.S b/arch/arm/crypto/aes-neonbs-core.S new file mode 100644 index 000000000000..2b625c6d4712 --- /dev/null +++ b/arch/arm/crypto/aes-neonbs-core.S @@ -0,0 +1,1023 @@ +/* + * Bit sliced AES using NEON instructions + * + * Copyright (C) 2017 Linaro Ltd. + * Author: Ard Biesheuvel <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * The algorithm implemented here is described in detail by the paper + * 'Faster and Timing-Attack Resistant AES-GCM' by Emilia Kaesper and + * Peter Schwabe (https://eprint.iacr.org/2009/129.pdf) + * + * This implementation is based primarily on the OpenSSL implementation + * for 32-bit ARM written by Andy Polyakov <appro@openssl.org> + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + + .text + .fpu neon + + rounds .req ip + bskey .req r4 + + q0l .req d0 + q0h .req d1 + q1l .req d2 + q1h .req d3 + q2l .req d4 + q2h .req d5 + q3l .req d6 + q3h .req d7 + q4l .req d8 + q4h .req d9 + q5l .req d10 + q5h .req d11 + q6l .req d12 + q6h .req d13 + q7l .req d14 + q7h .req d15 + q8l .req d16 + q8h .req d17 + q9l .req d18 + q9h .req d19 + q10l .req d20 + q10h .req d21 + q11l .req d22 + q11h .req d23 + q12l .req d24 + q12h .req d25 + q13l .req d26 + q13h .req d27 + q14l .req d28 + q14h .req d29 + q15l .req d30 + q15h .req d31 + + .macro __tbl, out, tbl, in, tmp + .ifc \out, \tbl + .ifb \tmp + .error __tbl needs temp register if out == tbl + .endif + vmov \tmp, \out + .endif + vtbl.8 \out\()l, {\tbl}, \in\()l + .ifc \out, \tbl + vtbl.8 \out\()h, {\tmp}, \in\()h + .else + vtbl.8 \out\()h, {\tbl}, \in\()h + .endif + .endm + + .macro __ldr, out, sym + vldr \out\()l, \sym + vldr \out\()h, \sym + 8 + .endm + + .macro __adr, reg, lbl + adr \reg, \lbl +THUMB( orr \reg, \reg, #1 ) + .endm + + .macro in_bs_ch, b0, b1, b2, b3, b4, b5, b6, b7 + veor \b2, \b2, \b1 + veor \b5, \b5, \b6 + veor \b3, \b3, \b0 + veor \b6, \b6, \b2 + veor \b5, \b5, \b0 + veor \b6, \b6, \b3 + veor \b3, \b3, \b7 + veor \b7, \b7, \b5 + veor \b3, \b3, \b4 + veor \b4, \b4, \b5 + veor \b2, \b2, \b7 + veor \b3, \b3, \b1 + veor \b1, \b1, \b5 + .endm + + .macro out_bs_ch, b0, b1, b2, b3, b4, b5, b6, b7 + veor \b0, \b0, \b6 + veor \b1, \b1, \b4 + veor \b4, \b4, \b6 + veor \b2, \b2, \b0 + veor \b6, \b6, \b1 + veor \b1, \b1, \b5 + veor \b5, \b5, \b3 + veor \b3, \b3, \b7 + veor \b7, \b7, \b5 + veor \b2, \b2, \b5 + veor \b4, \b4, \b7 + .endm + + .macro inv_in_bs_ch, b6, b1, b2, b4, b7, b0, b3, b5 + veor \b1, \b1, \b7 + veor \b4, \b4, \b7 + veor \b7, \b7, \b5 + veor \b1, \b1, \b3 + veor \b2, \b2, \b5 + veor \b3, \b3, \b7 + veor \b6, \b6, \b1 + veor \b2, \b2, \b0 + veor \b5, \b5, \b3 + veor \b4, \b4, \b6 + veor \b0, \b0, \b6 + veor \b1, \b1, \b4 + .endm + + .macro inv_out_bs_ch, b6, b5, b0, b3, b7, b1, b4, b2 + veor \b1, \b1, \b5 + veor \b2, \b2, \b7 + veor \b3, \b3, \b1 + veor \b4, \b4, \b5 + veor \b7, \b7, \b5 + veor \b3, \b3, \b4 + veor \b5, \b5, \b0 + veor \b3, \b3, \b7 + veor \b6, \b6, \b2 + veor \b2, \b2, \b1 + veor \b6, \b6, \b3 + veor \b3, \b3, \b0 + veor \b5, \b5, \b6 + .endm + + .macro mul_gf4, x0, x1, y0, y1, t0, t1 + veor \t0, \y0, \y1 + vand \t0, \t0, \x0 + veor \x0, \x0, \x1 + vand \t1, \x1, \y0 + vand \x0, \x0, \y1 + veor \x1, \t1, \t0 + veor \x0, \x0, \t1 + .endm + + .macro mul_gf4_n_gf4, x0, x1, y0, y1, t0, x2, x3, y2, y3, t1 + veor \t0, \y0, \y1 + veor \t1, \y2, \y3 + vand \t0, \t0, \x0 + vand \t1, \t1, \x2 + veor \x0, \x0, \x1 + veor \x2, \x2, \x3 + vand \x1, \x1, \y0 + vand \x3, \x3, \y2 + vand \x0, \x0, \y1 + vand \x2, \x2, \y3 + veor \x1, \x1, \x0 + veor \x2, \x2, \x3 + veor \x0, \x0, \t0 + veor \x3, \x3, \t1 + .endm + + .macro mul_gf16_2, x0, x1, x2, x3, x4, x5, x6, x7, \ + y0, y1, y2, y3, t0, t1, t2, t3 + veor \t0, \x0, \x2 + veor \t1, \x1, \x3 + mul_gf4 \x0, \x1, \y0, \y1, \t2, \t3 + veor \y0, \y0, \y2 + veor \y1, \y1, \y3 + mul_gf4_n_gf4 \t0, \t1, \y0, \y1, \t3, \x2, \x3, \y2, \y3, \t2 + veor \x0, \x0, \t0 + veor \x2, \x2, \t0 + veor \x1, \x1, \t1 + veor \x3, \x3, \t1 + veor \t0, \x4, \x6 + veor \t1, \x5, \x7 + mul_gf4_n_gf4 \t0, \t1, \y0, \y1, \t3, \x6, \x7, \y2, \y3, \t2 + veor \y0, \y0, \y2 + veor \y1, \y1, \y3 + mul_gf4 \x4, \x5, \y0, \y1, \t2, \t3 + veor \x4, \x4, \t0 + veor \x6, \x6, \t0 + veor \x5, \x5, \t1 + veor \x7, \x7, \t1 + .endm + + .macro inv_gf256, x0, x1, x2, x3, x4, x5, x6, x7, \ + t0, t1, t2, t3, s0, s1, s2, s3 + veor \t3, \x4, \x6 + veor \t0, \x5, \x7 + veor \t1, \x1, \x3 + veor \s1, \x7, \x6 + veor \s0, \x0, \x2 + veor \s3, \t3, \t0 + vorr \t2, \t0, \t1 + vand \s2, \t3, \s0 + vorr \t3, \t3, \s0 + veor \s0, \s0, \t1 + vand \t0, \t0, \t1 + veor \t1, \x3, \x2 + vand \s3, \s3, \s0 + vand \s1, \s1, \t1 + veor \t1, \x4, \x5 + veor \s0, \x1, \x0 + veor \t3, \t3, \s1 + veor \t2, \t2, \s1 + vand \s1, \t1, \s0 + vorr \t1, \t1, \s0 + veor \t3, \t3, \s3 + veor \t0, \t0, \s1 + veor \t2, \t2, \s2 + veor \t1, \t1, \s3 + veor \t0, \t0, \s2 + vand \s0, \x7, \x3 + veor \t1, \t1, \s2 + vand \s1, \x6, \x2 + vand \s2, \x5, \x1 + vorr \s3, \x4, \x0 + veor \t3, \t3, \s0 + veor \t1, \t1, \s2 + veor \s0, \t0, \s3 + veor \t2, \t2, \s1 + vand \s2, \t3, \t1 + veor \s1, \t2, \s2 + veor \s3, \s0, \s2 + vbsl \s1, \t1, \s0 + vmvn \t0, \s0 + vbsl \s0, \s1, \s3 + vbsl \t0, \s1, \s3 + vbsl \s3, \t3, \t2 + veor \t3, \t3, \t2 + vand \s2, \s0, \s3 + veor \t1, \t1, \t0 + veor \s2, \s2, \t3 + mul_gf16_2 \x0, \x1, \x2, \x3, \x4, \x5, \x6, \x7, \ + \s3, \s2, \s1, \t1, \s0, \t0, \t2, \t3 + .endm + + .macro sbox, b0, b1, b2, b3, b4, b5, b6, b7, \ + t0, t1, t2, t3, s0, s1, s2, s3 + in_bs_ch \b0, \b1, \b2, \b3, \b4, \b5, \b6, \b7 + inv_gf256 \b6, \b5, \b0, \b3, \b7, \b1, \b4, \b2, \ + \t0, \t1, \t2, \t3, \s0, \s1, \s2, \s3 + out_bs_ch \b7, \b1, \b4, \b2, \b6, \b5, \b0, \b3 + .endm + + .macro inv_sbox, b0, b1, b2, b3, b4, b5, b6, b7, \ + t0, t1, t2, t3, s0, s1, s2, s3 + inv_in_bs_ch \b0, \b1, \b2, \b3, \b4, \b5, \b6, \b7 + inv_gf256 \b5, \b1, \b2, \b6, \b3, \b7, \b0, \b4, \ + \t0, \t1, \t2, \t3, \s0, \s1, \s2, \s3 + inv_out_bs_ch \b3, \b7, \b0, \b4, \b5, \b1, \b2, \b6 + .endm + + .macro shift_rows, x0, x1, x2, x3, x4, x5, x6, x7, \ + t0, t1, t2, t3, mask + vld1.8 {\t0-\t1}, [bskey, :256]! + veor \t0, \t0, \x0 + vld1.8 {\t2-\t3}, [bskey, :256]! + veor \t1, \t1, \x1 + __tbl \x0, \t0, \mask + veor \t2, \t2, \x2 + __tbl \x1, \t1, \mask + vld1.8 {\t0-\t1}, [bskey, :256]! + veor \t3, \t3, \x3 + __tbl \x2, \t2, \mask + __tbl \x3, \t3, \mask + vld1.8 {\t2-\t3}, [bskey, :256]! + veor \t0, \t0, \x4 + veor \t1, \t1, \x5 + __tbl \x4, \t0, \mask + veor \t2, \t2, \x6 + __tbl \x5, \t1, \mask + veor \t3, \t3, \x7 + __tbl \x6, \t2, \mask + __tbl \x7, \t3, \mask + .endm + + .macro inv_shift_rows, x0, x1, x2, x3, x4, x5, x6, x7, \ + t0, t1, t2, t3, mask + __tbl \x0, \x0, \mask, \t0 + __tbl \x1, \x1, \mask, \t1 + __tbl \x2, \x2, \mask, \t2 + __tbl \x3, \x3, \mask, \t3 + __tbl \x4, \x4, \mask, \t0 + __tbl \x5, \x5, \mask, \t1 + __tbl \x6, \x6, \mask, \t2 + __tbl \x7, \x7, \mask, \t3 + .endm + + .macro mix_cols, x0, x1, x2, x3, x4, x5, x6, x7, \ + t0, t1, t2, t3, t4, t5, t6, t7, inv + vext.8 \t0, \x0, \x0, #12 + vext.8 \t1, \x1, \x1, #12 + veor \x0, \x0, \t0 + vext.8 \t2, \x2, \x2, #12 + veor \x1, \x1, \t1 + vext.8 \t3, \x3, \x3, #12 + veor \x2, \x2, \t2 + vext.8 \t4, \x4, \x4, #12 + veor \x3, \x3, \t3 + vext.8 \t5, \x5, \x5, #12 + veor \x4, \x4, \t4 + vext.8 \t6, \x6, \x6, #12 + veor \x5, \x5, \t5 + vext.8 \t7, \x7, \x7, #12 + veor \x6, \x6, \t6 + veor \t1, \t1, \x0 + veor.8 \x7, \x7, \t7 + vext.8 \x0, \x0, \x0, #8 + veor \t2, \t2, \x1 + veor \t0, \t0, \x7 + veor \t1, \t1, \x7 + vext.8 \x1, \x1, \x1, #8 + veor \t5, \t5, \x4 + veor \x0, \x0, \t0 + veor \t6, \t6, \x5 + veor \x1, \x1, \t1 + vext.8 \t0, \x4, \x4, #8 + veor \t4, \t4, \x3 + vext.8 \t1, \x5, \x5, #8 + veor \t7, \t7, \x6 + vext.8 \x4, \x3, \x3, #8 + veor \t3, \t3, \x2 + vext.8 \x5, \x7, \x7, #8 + veor \t4, \t4, \x7 + vext.8 \x3, \x6, \x6, #8 + veor \t3, \t3, \x7 + vext.8 \x6, \x2, \x2, #8 + veor \x7, \t1, \t5 + .ifb \inv + veor \x2, \t0, \t4 + veor \x4, \x4, \t3 + veor \x5, \x5, \t7 + veor \x3, \x3, \t6 + veor \x6, \x6, \t2 + .else + veor \t3, \t3, \x4 + veor \x5, \x5, \t7 + veor \x2, \x3, \t6 + veor \x3, \t0, \t4 + veor \x4, \x6, \t2 + vmov \x6, \t3 + .endif + .endm + + .macro inv_mix_cols, x0, x1, x2, x3, x4, x5, x6, x7, \ + t0, t1, t2, t3, t4, t5, t6, t7 + vld1.8 {\t0-\t1}, [bskey, :256]! + veor \x0, \x0, \t0 + vld1.8 {\t2-\t3}, [bskey, :256]! + veor \x1, \x1, \t1 + vld1.8 {\t4-\t5}, [bskey, :256]! + veor \x2, \x2, \t2 + vld1.8 {\t6-\t7}, [bskey, :256] + sub bskey, bskey, #224 + veor \x3, \x3, \t3 + veor \x4, \x4, \t4 + veor \x5, \x5, \t5 + veor \x6, \x6, \t6 + veor \x7, \x7, \t7 + vext.8 \t0, \x0, \x0, #8 + vext.8 \t6, \x6, \x6, #8 + vext.8 \t7, \x7, \x7, #8 + veor \t0, \t0, \x0 + vext.8 \t1, \x1, \x1, #8 + veor \t6, \t6, \x6 + vext.8 \t2, \x2, \x2, #8 + veor \t7, \t7, \x7 + vext.8 \t3, \x3, \x3, #8 + veor \t1, \t1, \x1 + vext.8 \t4, \x4, \x4, #8 + veor \t2, \t2, \x2 + vext.8 \t5, \x5, \x5, #8 + veor \t3, \t3, \x3 + veor \t4, \t4, \x4 + veor \t5, \t5, \x5 + veor \x0, \x0, \t6 + veor \x1, \x1, \t6 + veor \x2, \x2, \t0 + veor \x4, \x4, \t2 + veor \x3, \x3, \t1 + veor \x1, \x1, \t7 + veor \x2, \x2, \t7 + veor \x4, \x4, \t6 + veor \x5, \x5, \t3 + veor \x3, \x3, \t6 + veor \x6, \x6, \t4 + veor \x4, \x4, \t7 + veor \x5, \x5, \t7 + veor \x7, \x7, \t5 + mix_cols \x0, \x1, \x2, \x3, \x4, \x5, \x6, \x7, \ + \t0, \t1, \t2, \t3, \t4, \t5, \t6, \t7, 1 + .endm + + .macro swapmove_2x, a0, b0, a1, b1, n, mask, t0, t1 + vshr.u64 \t0, \b0, #\n + vshr.u64 \t1, \b1, #\n + veor \t0, \t0, \a0 + veor \t1, \t1, \a1 + vand \t0, \t0, \mask + vand \t1, \t1, \mask + veor \a0, \a0, \t0 + vshl.s64 \t0, \t0, #\n + veor \a1, \a1, \t1 + vshl.s64 \t1, \t1, #\n + veor \b0, \b0, \t0 + veor \b1, \b1, \t1 + .endm + + .macro bitslice, x7, x6, x5, x4, x3, x2, x1, x0, t0, t1, t2, t3 + vmov.i8 \t0, #0x55 + vmov.i8 \t1, #0x33 + swapmove_2x \x0, \x1, \x2, \x3, 1, \t0, \t2, \t3 + swapmove_2x \x4, \x5, \x6, \x7, 1, \t0, \t2, \t3 + vmov.i8 \t0, #0x0f + swapmove_2x \x0, \x2, \x1, \x3, 2, \t1, \t2, \t3 + swapmove_2x \x4, \x6, \x5, \x7, 2, \t1, \t2, \t3 + swapmove_2x \x0, \x4, \x1, \x5, 4, \t0, \t2, \t3 + swapmove_2x \x2, \x6, \x3, \x7, 4, \t0, \t2, \t3 + .endm + + .align 4 +M0: .quad 0x02060a0e03070b0f, 0x0004080c0105090d + + /* + * void aesbs_convert_key(u8 out[], u32 const rk[], int rounds) + */ +ENTRY(aesbs_convert_key) + vld1.32 {q7}, [r1]! // load round 0 key + vld1.32 {q15}, [r1]! // load round 1 key + + vmov.i8 q8, #0x01 // bit masks + vmov.i8 q9, #0x02 + vmov.i8 q10, #0x04 + vmov.i8 q11, #0x08 + vmov.i8 q12, #0x10 + vmov.i8 q13, #0x20 + __ldr q14, M0 + + sub r2, r2, #1 + vst1.8 {q7}, [r0, :128]! // save round 0 key + +.Lkey_loop: + __tbl q7, q15, q14 + vmov.i8 q6, #0x40 + vmov.i8 q15, #0x80 + + vtst.8 q0, q7, q8 + vtst.8 q1, q7, q9 + vtst.8 q2, q7, q10 + vtst.8 q3, q7, q11 + vtst.8 q4, q7, q12 + vtst.8 q5, q7, q13 + vtst.8 q6, q7, q6 + vtst.8 q7, q7, q15 + vld1.32 {q15}, [r1]! // load next round key + vmvn q0, q0 + vmvn q1, q1 + vmvn q5, q5 + vmvn q6, q6 + + subs r2, r2, #1 + vst1.8 {q0-q1}, [r0, :256]! + vst1.8 {q2-q3}, [r0, :256]! + vst1.8 {q4-q5}, [r0, :256]! + vst1.8 {q6-q7}, [r0, :256]! + bne .Lkey_loop + + vmov.i8 q7, #0x63 // compose .L63 + veor q15, q15, q7 + vst1.8 {q15}, [r0, :128] + bx lr +ENDPROC(aesbs_convert_key) + + .align 4 +M0SR: .quad 0x0a0e02060f03070b, 0x0004080c05090d01 + +aesbs_encrypt8: + vld1.8 {q9}, [bskey, :128]! // round 0 key + __ldr q8, M0SR + + veor q10, q0, q9 // xor with round0 key + veor q11, q1, q9 + __tbl q0, q10, q8 + veor q12, q2, q9 + __tbl q1, q11, q8 + veor q13, q3, q9 + __tbl q2, q12, q8 + veor q14, q4, q9 + __tbl q3, q13, q8 + veor q15, q5, q9 + __tbl q4, q14, q8 + veor q10, q6, q9 + __tbl q5, q15, q8 + veor q11, q7, q9 + __tbl q6, q10, q8 + __tbl q7, q11, q8 + + bitslice q0, q1, q2, q3, q4, q5, q6, q7, q8, q9, q10, q11 + + sub rounds, rounds, #1 + b .Lenc_sbox + + .align 5 +SR: .quad 0x0504070600030201, 0x0f0e0d0c0a09080b +SRM0: .quad 0x0304090e00050a0f, 0x01060b0c0207080d + +.Lenc_last: + __ldr q12, SRM0 +.Lenc_loop: + shift_rows q0, q1, q2, q3, q4, q5, q6, q7, q8, q9, q10, q11, q12 +.Lenc_sbox: + sbox q0, q1, q2, q3, q4, q5, q6, q7, q8, q9, q10, q11, q12, \ + q13, q14, q15 + subs rounds, rounds, #1 + bcc .Lenc_done + + mix_cols q0, q1, q4, q6, q3, q7, q2, q5, q8, q9, q10, q11, q12, \ + q13, q14, q15 + + beq .Lenc_last + __ldr q12, SR + b .Lenc_loop + +.Lenc_done: + vld1.8 {q12}, [bskey, :128] // last round key + + bitslice q0, q1, q4, q6, q3, q7, q2, q5, q8, q9, q10, q11 + + veor q0, q0, q12 + veor q1, q1, q12 + veor q4, q4, q12 + veor q6, q6, q12 + veor q3, q3, q12 + veor q7, q7, q12 + veor q2, q2, q12 + veor q5, q5, q12 + bx lr +ENDPROC(aesbs_encrypt8) + + .align 4 +M0ISR: .quad 0x0a0e0206070b0f03, 0x0004080c0d010509 + +aesbs_decrypt8: + add bskey, bskey, rounds, lsl #7 + sub bskey, bskey, #112 + vld1.8 {q9}, [bskey, :128] // round 0 key + sub bskey, bskey, #128 + __ldr q8, M0ISR + + veor q10, q0, q9 // xor with round0 key + veor q11, q1, q9 + __tbl q0, q10, q8 + veor q12, q2, q9 + __tbl q1, q11, q8 + veor q13, q3, q9 + __tbl q2, q12, q8 + veor q14, q4, q9 + __tbl q3, q13, q8 + veor q15, q5, q9 + __tbl q4, q14, q8 + veor q10, q6, q9 + __tbl q5, q15, q8 + veor q11, q7, q9 + __tbl q6, q10, q8 + __tbl q7, q11, q8 + + bitslice q0, q1, q2, q3, q4, q5, q6, q7, q8, q9, q10, q11 + + sub rounds, rounds, #1 + b .Ldec_sbox + + .align 5 +ISR: .quad 0x0504070602010003, 0x0f0e0d0c080b0a09 +ISRM0: .quad 0x01040b0e0205080f, 0x0306090c00070a0d + +.Ldec_last: + __ldr q12, ISRM0 +.Ldec_loop: + inv_shift_rows q0, q1, q2, q3, q4, q5, q6, q7, q8, q9, q10, q11, q12 +.Ldec_sbox: + inv_sbox q0, q1, q2, q3, q4, q5, q6, q7, q8, q9, q10, q11, q12, \ + q13, q14, q15 + subs rounds, rounds, #1 + bcc .Ldec_done + + inv_mix_cols q0, q1, q6, q4, q2, q7, q3, q5, q8, q9, q10, q11, q12, \ + q13, q14, q15 + + beq .Ldec_last + __ldr q12, ISR + b .Ldec_loop + +.Ldec_done: + add bskey, bskey, #112 + vld1.8 {q12}, [bskey, :128] // last round key + + bitslice q0, q1, q6, q4, q2, q7, q3, q5, q8, q9, q10, q11 + + veor q0, q0, q12 + veor q1, q1, q12 + veor q6, q6, q12 + veor q4, q4, q12 + veor q2, q2, q12 + veor q7, q7, q12 + veor q3, q3, q12 + veor q5, q5, q12 + bx lr +ENDPROC(aesbs_decrypt8) + + /* + * aesbs_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, + * int blocks) + * aesbs_ecb_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, + * int blocks) + */ + .macro __ecb_crypt, do8, o0, o1, o2, o3, o4, o5, o6, o7 + push {r4-r6, lr} + ldr r5, [sp, #16] // number of blocks + +99: __adr ip, 0f + and lr, r5, #7 + cmp r5, #8 + sub ip, ip, lr, lsl #2 + bxlt ip // computed goto if blocks < 8 + + vld1.8 {q0}, [r1]! + vld1.8 {q1}, [r1]! + vld1.8 {q2}, [r1]! + vld1.8 {q3}, [r1]! + vld1.8 {q4}, [r1]! + vld1.8 {q5}, [r1]! + vld1.8 {q6}, [r1]! + vld1.8 {q7}, [r1]! + +0: mov bskey, r2 + mov rounds, r3 + bl \do8 + + __adr ip, 1f + and lr, r5, #7 + cmp r5, #8 + sub ip, ip, lr, lsl #2 + bxlt ip // computed goto if blocks < 8 + + vst1.8 {\o0}, [r0]! + vst1.8 {\o1}, [r0]! + vst1.8 {\o2}, [r0]! + vst1.8 {\o3}, [r0]! + vst1.8 {\o4}, [r0]! + vst1.8 {\o5}, [r0]! + vst1.8 {\o6}, [r0]! + vst1.8 {\o7}, [r0]! + +1: subs r5, r5, #8 + bgt 99b + + pop {r4-r6, pc} + .endm + + .align 4 +ENTRY(aesbs_ecb_encrypt) + __ecb_crypt aesbs_encrypt8, q0, q1, q4, q6, q3, q7, q2, q5 +ENDPROC(aesbs_ecb_encrypt) + + .align 4 +ENTRY(aesbs_ecb_decrypt) + __ecb_crypt aesbs_decrypt8, q0, q1, q6, q4, q2, q7, q3, q5 +ENDPROC(aesbs_ecb_decrypt) + + /* + * aesbs_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[], + * int rounds, int blocks, u8 iv[]) + */ + .align 4 +ENTRY(aesbs_cbc_decrypt) + mov ip, sp + push {r4-r6, lr} + ldm ip, {r5-r6} // load args 4-5 + +99: __adr ip, 0f + and lr, r5, #7 + cmp r5, #8 + sub ip, ip, lr, lsl #2 + mov lr, r1 + bxlt ip // computed goto if blocks < 8 + + vld1.8 {q0}, [lr]! + vld1.8 {q1}, [lr]! + vld1.8 {q2}, [lr]! + vld1.8 {q3}, [lr]! + vld1.8 {q4}, [lr]! + vld1.8 {q5}, [lr]! + vld1.8 {q6}, [lr]! + vld1.8 {q7}, [lr] + +0: mov bskey, r2 + mov rounds, r3 + bl aesbs_decrypt8 + + vld1.8 {q8}, [r6] + vmov q9, q8 + vmov q10, q8 + vmov q11, q8 + vmov q12, q8 + vmov q13, q8 + vmov q14, q8 + vmov q15, q8 + + __adr ip, 1f + and lr, r5, #7 + cmp r5, #8 + sub ip, ip, lr, lsl #2 + bxlt ip // computed goto if blocks < 8 + + vld1.8 {q9}, [r1]! + vld1.8 {q10}, [r1]! + vld1.8 {q11}, [r1]! + vld1.8 {q12}, [r1]! + vld1.8 {q13}, [r1]! + vld1.8 {q14}, [r1]! + vld1.8 {q15}, [r1]! + W(nop) + +1: __adr ip, 2f + sub ip, ip, lr, lsl #3 + bxlt ip // computed goto if blocks < 8 + + veor q0, q0, q8 + vst1.8 {q0}, [r0]! + veor q1, q1, q9 + vst1.8 {q1}, [r0]! + veor q6, q6, q10 + vst1.8 {q6}, [r0]! + veor q4, q4, q11 + vst1.8 {q4}, [r0]! + veor q2, q2, q12 + vst1.8 {q2}, [r0]! + veor q7, q7, q13 + vst1.8 {q7}, [r0]! + veor q3, q3, q14 + vst1.8 {q3}, [r0]! + veor q5, q5, q15 + vld1.8 {q8}, [r1]! // load next round's iv +2: vst1.8 {q5}, [r0]! + + subs r5, r5, #8 + vst1.8 {q8}, [r6] // store next round's iv + bgt 99b + + pop {r4-r6, pc} +ENDPROC(aesbs_cbc_decrypt) + + .macro next_ctr, q + vmov.32 \q\()h[1], r10 + adds r10, r10, #1 + vmov.32 \q\()h[0], r9 + adcs r9, r9, #0 + vmov.32 \q\()l[1], r8 + adcs r8, r8, #0 + vmov.32 \q\()l[0], r7 + adc r7, r7, #0 + vrev32.8 \q, \q + .endm + + /* + * aesbs_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[], + * int rounds, int blocks, u8 ctr[], u8 final[]) + */ +ENTRY(aesbs_ctr_encrypt) + mov ip, sp + push {r4-r10, lr} + + ldm ip, {r5-r7} // load args 4-6 + teq r7, #0 + addne r5, r5, #1 // one extra block if final != 0 + + vld1.8 {q0}, [r6] // load counter + vrev32.8 q1, q0 + vmov r9, r10, d3 + vmov r7, r8, d2 + + adds r10, r10, #1 + adcs r9, r9, #0 + adcs r8, r8, #0 + adc r7, r7, #0 + +99: vmov q1, q0 + vmov q2, q0 + vmov q3, q0 + vmov q4, q0 + vmov q5, q0 + vmov q6, q0 + vmov q7, q0 + + __adr ip, 0f + sub lr, r5, #1 + and lr, lr, #7 + cmp r5, #8 + sub ip, ip, lr, lsl #5 + sub ip, ip, lr, lsl #2 + bxlt ip // computed goto if blocks < 8 + + next_ctr q1 + next_ctr q2 + next_ctr q3 + next_ctr q4 + next_ctr q5 + next_ctr q6 + next_ctr q7 + +0: mov bskey, r2 + mov rounds, r3 + bl aesbs_encrypt8 + + __adr ip, 1f + and lr, r5, #7 + cmp r5, #8 + movgt r4, #0 + ldrle r4, [sp, #40] // load final in the last round + sub ip, ip, lr, lsl #2 + bxlt ip // computed goto if blocks < 8 + + vld1.8 {q8}, [r1]! + vld1.8 {q9}, [r1]! + vld1.8 {q10}, [r1]! + vld1.8 {q11}, [r1]! + vld1.8 {q12}, [r1]! + vld1.8 {q13}, [r1]! + vld1.8 {q14}, [r1]! + teq r4, #0 // skip last block if 'final' +1: bne 2f + vld1.8 {q15}, [r1]! + +2: __adr ip, 3f + cmp r5, #8 + sub ip, ip, lr, lsl #3 + bxlt ip // computed goto if blocks < 8 + + veor q0, q0, q8 + vst1.8 {q0}, [r0]! + veor q1, q1, q9 + vst1.8 {q1}, [r0]! + veor q4, q4, q10 + vst1.8 {q4}, [r0]! + veor q6, q6, q11 + vst1.8 {q6}, [r0]! + veor q3, q3, q12 + vst1.8 {q3}, [r0]! + veor q7, q7, q13 + vst1.8 {q7}, [r0]! + veor q2, q2, q14 + vst1.8 {q2}, [r0]! + teq r4, #0 // skip last block if 'final' + W(bne) 5f +3: veor q5, q5, q15 + vst1.8 {q5}, [r0]! + +4: next_ctr q0 + + subs r5, r5, #8 + bgt 99b + + vst1.8 {q0}, [r6] + pop {r4-r10, pc} + +5: vst1.8 {q5}, [r4] + b 4b +ENDPROC(aesbs_ctr_encrypt) + + .macro next_tweak, out, in, const, tmp + vshr.s64 \tmp, \in, #63 + vand \tmp, \tmp, \const + vadd.u64 \out, \in, \in + vext.8 \tmp, \tmp, \tmp, #8 + veor \out, \out, \tmp + .endm + + .align 4 +.Lxts_mul_x: + .quad 1, 0x87 + + /* + * aesbs_xts_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, + * int blocks, u8 iv[]) + * aesbs_xts_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, + * int blocks, u8 iv[]) + */ +__xts_prepare8: + vld1.8 {q14}, [r7] // load iv + __ldr q15, .Lxts_mul_x // load tweak mask + vmov q12, q14 + + __adr ip, 0f + and r4, r6, #7 + cmp r6, #8 + sub ip, ip, r4, lsl #5 + mov r4, sp + bxlt ip // computed goto if blocks < 8 + + vld1.8 {q0}, [r1]! + next_tweak q12, q14, q15, q13 + veor q0, q0, q14 + vst1.8 {q14}, [r4, :128]! + + vld1.8 {q1}, [r1]! + next_tweak q14, q12, q15, q13 + veor q1, q1, q12 + vst1.8 {q12}, [r4, :128]! + + vld1.8 {q2}, [r1]! + next_tweak q12, q14, q15, q13 + veor q2, q2, q14 + vst1.8 {q14}, [r4, :128]! + + vld1.8 {q3}, [r1]! + next_tweak q14, q12, q15, q13 + veor q3, q3, q12 + vst1.8 {q12}, [r4, :128]! + + vld1.8 {q4}, [r1]! + next_tweak q12, q14, q15, q13 + veor q4, q4, q14 + vst1.8 {q14}, [r4, :128]! + + vld1.8 {q5}, [r1]! + next_tweak q14, q12, q15, q13 + veor q5, q5, q12 + vst1.8 {q12}, [r4, :128]! + + vld1.8 {q6}, [r1]! + next_tweak q12, q14, q15, q13 + veor q6, q6, q14 + vst1.8 {q14}, [r4, :128]! + + vld1.8 {q7}, [r1]! + next_tweak q14, q12, q15, q13 + veor q7, q7, q12 + vst1.8 {q12}, [r4, :128] + +0: vst1.8 {q14}, [r7] // store next iv + bx lr +ENDPROC(__xts_prepare8) + + .macro __xts_crypt, do8, o0, o1, o2, o3, o4, o5, o6, o7 + push {r4-r8, lr} + mov r5, sp // preserve sp + ldrd r6, r7, [sp, #24] // get blocks and iv args + sub ip, sp, #128 // make room for 8x tweak + bic ip, ip, #0xf // align sp to 16 bytes + mov sp, ip + +99: bl __xts_prepare8 + + mov bskey, r2 + mov rounds, r3 + bl \do8 + + __adr ip, 0f + and lr, r6, #7 + cmp r6, #8 + sub ip, ip, lr, lsl #2 + mov r4, sp + bxlt ip // computed goto if blocks < 8 + + vld1.8 {q8}, [r4, :128]! + vld1.8 {q9}, [r4, :128]! + vld1.8 {q10}, [r4, :128]! + vld1.8 {q11}, [r4, :128]! + vld1.8 {q12}, [r4, :128]! + vld1.8 {q13}, [r4, :128]! + vld1.8 {q14}, [r4, :128]! + vld1.8 {q15}, [r4, :128] + +0: __adr ip, 1f + sub ip, ip, lr, lsl #3 + bxlt ip // computed goto if blocks < 8 + + veor \o0, \o0, q8 + vst1.8 {\o0}, [r0]! + veor \o1, \o1, q9 + vst1.8 {\o1}, [r0]! + veor \o2, \o2, q10 + vst1.8 {\o2}, [r0]! + veor \o3, \o3, q11 + vst1.8 {\o3}, [r0]! + veor \o4, \o4, q12 + vst1.8 {\o4}, [r0]! + veor \o5, \o5, q13 + vst1.8 {\o5}, [r0]! + veor \o6, \o6, q14 + vst1.8 {\o6}, [r0]! + veor \o7, \o7, q15 + vst1.8 {\o7}, [r0]! + +1: subs r6, r6, #8 + bgt 99b + + mov sp, r5 + pop {r4-r8, pc} + .endm + +ENTRY(aesbs_xts_encrypt) + __xts_crypt aesbs_encrypt8, q0, q1, q4, q6, q3, q7, q2, q5 +ENDPROC(aesbs_xts_encrypt) + +ENTRY(aesbs_xts_decrypt) + __xts_crypt aesbs_decrypt8, q0, q1, q6, q4, q2, q7, q3, q5 +ENDPROC(aesbs_xts_decrypt) diff --git a/arch/arm/crypto/aes-neonbs-glue.c b/arch/arm/crypto/aes-neonbs-glue.c new file mode 100644 index 000000000000..2920b96dbd36 --- /dev/null +++ b/arch/arm/crypto/aes-neonbs-glue.c @@ -0,0 +1,406 @@ +/* + * Bit sliced AES using NEON instructions + * + * Copyright (C) 2017 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <asm/neon.h> +#include <crypto/aes.h> +#include <crypto/cbc.h> +#include <crypto/internal/simd.h> +#include <crypto/internal/skcipher.h> +#include <crypto/xts.h> +#include <linux/module.h> + +MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); +MODULE_LICENSE("GPL v2"); + +MODULE_ALIAS_CRYPTO("ecb(aes)"); +MODULE_ALIAS_CRYPTO("cbc(aes)"); +MODULE_ALIAS_CRYPTO("ctr(aes)"); +MODULE_ALIAS_CRYPTO("xts(aes)"); + +asmlinkage void aesbs_convert_key(u8 out[], u32 const rk[], int rounds); + +asmlinkage void aesbs_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks); +asmlinkage void aesbs_ecb_decrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks); + +asmlinkage void aesbs_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks, u8 iv[]); + +asmlinkage void aesbs_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks, u8 ctr[], u8 final[]); + +asmlinkage void aesbs_xts_encrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks, u8 iv[]); +asmlinkage void aesbs_xts_decrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks, u8 iv[]); + +asmlinkage void __aes_arm_encrypt(const u32 rk[], int rounds, const u8 in[], + u8 out[]); + +struct aesbs_ctx { + int rounds; + u8 rk[13 * (8 * AES_BLOCK_SIZE) + 32] __aligned(AES_BLOCK_SIZE); +}; + +struct aesbs_cbc_ctx { + struct aesbs_ctx key; + u32 enc[AES_MAX_KEYLENGTH_U32]; +}; + +struct aesbs_xts_ctx { + struct aesbs_ctx key; + u32 twkey[AES_MAX_KEYLENGTH_U32]; +}; + +static int aesbs_setkey(struct crypto_skcipher *tfm, const u8 *in_key, + unsigned int key_len) +{ + struct aesbs_ctx *ctx = crypto_skcipher_ctx(tfm); + struct crypto_aes_ctx rk; + int err; + + err = crypto_aes_expand_key(&rk, in_key, key_len); + if (err) + return err; + + ctx->rounds = 6 + key_len / 4; + + kernel_neon_begin(); + aesbs_convert_key(ctx->rk, rk.key_enc, ctx->rounds); + kernel_neon_end(); + + return 0; +} + +static int __ecb_crypt(struct skcipher_request *req, + void (*fn)(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks)) +{ + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct aesbs_ctx *ctx = crypto_skcipher_ctx(tfm); + struct skcipher_walk walk; + int err; + + err = skcipher_walk_virt(&walk, req, true); + + kernel_neon_begin(); + while (walk.nbytes >= AES_BLOCK_SIZE) { + unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE; + + if (walk.nbytes < walk.total) + blocks = round_down(blocks, + walk.stride / AES_BLOCK_SIZE); + + fn(walk.dst.virt.addr, walk.src.virt.addr, ctx->rk, + ctx->rounds, blocks); + err = skcipher_walk_done(&walk, + walk.nbytes - blocks * AES_BLOCK_SIZE); + } + kernel_neon_end(); + + return err; +} + +static int ecb_encrypt(struct skcipher_request *req) +{ + return __ecb_crypt(req, aesbs_ecb_encrypt); +} + +static int ecb_decrypt(struct skcipher_request *req) +{ + return __ecb_crypt(req, aesbs_ecb_decrypt); +} + +static int aesbs_cbc_setkey(struct crypto_skcipher *tfm, const u8 *in_key, + unsigned int key_len) +{ + struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); + struct crypto_aes_ctx rk; + int err; + + err = crypto_aes_expand_key(&rk, in_key, key_len); + if (err) + return err; + + ctx->key.rounds = 6 + key_len / 4; + + memcpy(ctx->enc, rk.key_enc, sizeof(ctx->enc)); + + kernel_neon_begin(); + aesbs_convert_key(ctx->key.rk, rk.key_enc, ctx->key.rounds); + kernel_neon_end(); + + return 0; +} + +static void cbc_encrypt_one(struct crypto_skcipher *tfm, const u8 *src, u8 *dst) +{ + struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); + + __aes_arm_encrypt(ctx->enc, ctx->key.rounds, src, dst); +} + +static int cbc_encrypt(struct skcipher_request *req) +{ + return crypto_cbc_encrypt_walk(req, cbc_encrypt_one); +} + +static int cbc_decrypt(struct skcipher_request *req) +{ + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); + struct skcipher_walk walk; + int err; + + err = skcipher_walk_virt(&walk, req, true); + + kernel_neon_begin(); + while (walk.nbytes >= AES_BLOCK_SIZE) { + unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE; + + if (walk.nbytes < walk.total) + blocks = round_down(blocks, + walk.stride / AES_BLOCK_SIZE); + + aesbs_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr, + ctx->key.rk, ctx->key.rounds, blocks, + walk.iv); + err = skcipher_walk_done(&walk, + walk.nbytes - blocks * AES_BLOCK_SIZE); + } + kernel_neon_end(); + + return err; +} + +static int ctr_encrypt(struct skcipher_request *req) +{ + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct aesbs_ctx *ctx = crypto_skcipher_ctx(tfm); + struct skcipher_walk walk; + u8 buf[AES_BLOCK_SIZE]; + int err; + + err = skcipher_walk_virt(&walk, req, true); + + kernel_neon_begin(); + while (walk.nbytes > 0) { + unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE; + u8 *final = (walk.total % AES_BLOCK_SIZE) ? buf : NULL; + + if (walk.nbytes < walk.total) { + blocks = round_down(blocks, + walk.stride / AES_BLOCK_SIZE); + final = NULL; + } + + aesbs_ctr_encrypt(walk.dst.virt.addr, walk.src.virt.addr, + ctx->rk, ctx->rounds, blocks, walk.iv, final); + + if (final) { + u8 *dst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE; + u8 *src = walk.src.virt.addr + blocks * AES_BLOCK_SIZE; + + if (dst != src) + memcpy(dst, src, walk.total % AES_BLOCK_SIZE); + crypto_xor(dst, final, walk.total % AES_BLOCK_SIZE); + + err = skcipher_walk_done(&walk, 0); + break; + } + err = skcipher_walk_done(&walk, + walk.nbytes - blocks * AES_BLOCK_SIZE); + } + kernel_neon_end(); + + return err; +} + +static int aesbs_xts_setkey(struct crypto_skcipher *tfm, const u8 *in_key, + unsigned int key_len) +{ + struct aesbs_xts_ctx *ctx = crypto_skcipher_ctx(tfm); + struct crypto_aes_ctx rk; + int err; + + err = xts_verify_key(tfm, in_key, key_len); + if (err) + return err; + + key_len /= 2; + err = crypto_aes_expand_key(&rk, in_key + key_len, key_len); + if (err) + return err; + + memcpy(ctx->twkey, rk.key_enc, sizeof(ctx->twkey)); + + return aesbs_setkey(tfm, in_key, key_len); +} + +static int __xts_crypt(struct skcipher_request *req, + void (*fn)(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks, u8 iv[])) +{ + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct aesbs_xts_ctx *ctx = crypto_skcipher_ctx(tfm); + struct skcipher_walk walk; + int err; + + err = skcipher_walk_virt(&walk, req, true); + + __aes_arm_encrypt(ctx->twkey, ctx->key.rounds, walk.iv, walk.iv); + + kernel_neon_begin(); + while (walk.nbytes >= AES_BLOCK_SIZE) { + unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE; + + if (walk.nbytes < walk.total) + blocks = round_down(blocks, + walk.stride / AES_BLOCK_SIZE); + + fn(walk.dst.virt.addr, walk.src.virt.addr, ctx->key.rk, + ctx->key.rounds, blocks, walk.iv); + err = skcipher_walk_done(&walk, + walk.nbytes - blocks * AES_BLOCK_SIZE); + } + kernel_neon_end(); + + return err; +} + +static int xts_encrypt(struct skcipher_request *req) +{ + return __xts_crypt(req, aesbs_xts_encrypt); +} + +static int xts_decrypt(struct skcipher_request *req) +{ + return __xts_crypt(req, aesbs_xts_decrypt); +} + +static struct skcipher_alg aes_algs[] = { { + .base.cra_name = "__ecb(aes)", + .base.cra_driver_name = "__ecb-aes-neonbs", + .base.cra_priority = 250, + .base.cra_blocksize = AES_BLOCK_SIZE, + .base.cra_ctxsize = sizeof(struct aesbs_ctx), + .base.cra_module = THIS_MODULE, + .base.cra_flags = CRYPTO_ALG_INTERNAL, + + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .walksize = 8 * AES_BLOCK_SIZE, + .setkey = aesbs_setkey, + .encrypt = ecb_encrypt, + .decrypt = ecb_decrypt, +}, { + .base.cra_name = "__cbc(aes)", + .base.cra_driver_name = "__cbc-aes-neonbs", + .base.cra_priority = 250, + .base.cra_blocksize = AES_BLOCK_SIZE, + .base.cra_ctxsize = sizeof(struct aesbs_cbc_ctx), + .base.cra_module = THIS_MODULE, + .base.cra_flags = CRYPTO_ALG_INTERNAL, + + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .walksize = 8 * AES_BLOCK_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = aesbs_cbc_setkey, + .encrypt = cbc_encrypt, + .decrypt = cbc_decrypt, +}, { + .base.cra_name = "__ctr(aes)", + .base.cra_driver_name = "__ctr-aes-neonbs", + .base.cra_priority = 250, + .base.cra_blocksize = 1, + .base.cra_ctxsize = sizeof(struct aesbs_ctx), + .base.cra_module = THIS_MODULE, + .base.cra_flags = CRYPTO_ALG_INTERNAL, + + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .chunksize = AES_BLOCK_SIZE, + .walksize = 8 * AES_BLOCK_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = aesbs_setkey, + .encrypt = ctr_encrypt, + .decrypt = ctr_encrypt, +}, { + .base.cra_name = "__xts(aes)", + .base.cra_driver_name = "__xts-aes-neonbs", + .base.cra_priority = 250, + .base.cra_blocksize = AES_BLOCK_SIZE, + .base.cra_ctxsize = sizeof(struct aesbs_xts_ctx), + .base.cra_module = THIS_MODULE, + .base.cra_flags = CRYPTO_ALG_INTERNAL, + + .min_keysize = 2 * AES_MIN_KEY_SIZE, + .max_keysize = 2 * AES_MAX_KEY_SIZE, + .walksize = 8 * AES_BLOCK_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = aesbs_xts_setkey, + .encrypt = xts_encrypt, + .decrypt = xts_decrypt, +} }; + +static struct simd_skcipher_alg *aes_simd_algs[ARRAY_SIZE(aes_algs)]; + +static void aes_exit(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(aes_simd_algs); i++) + if (aes_simd_algs[i]) + simd_skcipher_free(aes_simd_algs[i]); + + crypto_unregister_skciphers(aes_algs, ARRAY_SIZE(aes_algs)); +} + +static int __init aes_init(void) +{ + struct simd_skcipher_alg *simd; + const char *basename; + const char *algname; + const char *drvname; + int err; + int i; + + if (!(elf_hwcap & HWCAP_NEON)) + return -ENODEV; + + err = crypto_register_skciphers(aes_algs, ARRAY_SIZE(aes_algs)); + if (err) + return err; + + for (i = 0; i < ARRAY_SIZE(aes_algs); i++) { + if (!(aes_algs[i].base.cra_flags & CRYPTO_ALG_INTERNAL)) + continue; + + algname = aes_algs[i].base.cra_name + 2; + drvname = aes_algs[i].base.cra_driver_name + 2; + basename = aes_algs[i].base.cra_driver_name; + simd = simd_skcipher_create_compat(algname, drvname, basename); + err = PTR_ERR(simd); + if (IS_ERR(simd)) + goto unregister_simds; + + aes_simd_algs[i] = simd; + } + return 0; + +unregister_simds: + aes_exit(); + return err; +} + +module_init(aes_init); +module_exit(aes_exit); diff --git a/arch/arm/crypto/aes_glue.c b/arch/arm/crypto/aes_glue.c deleted file mode 100644 index 0409b8f89782..000000000000 --- a/arch/arm/crypto/aes_glue.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - * Glue Code for the asm optimized version of the AES Cipher Algorithm - */ - -#include <linux/module.h> -#include <linux/crypto.h> -#include <crypto/aes.h> - -#include "aes_glue.h" - -EXPORT_SYMBOL(AES_encrypt); -EXPORT_SYMBOL(AES_decrypt); -EXPORT_SYMBOL(private_AES_set_encrypt_key); -EXPORT_SYMBOL(private_AES_set_decrypt_key); - -static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) -{ - struct AES_CTX *ctx = crypto_tfm_ctx(tfm); - AES_encrypt(src, dst, &ctx->enc_key); -} - -static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) -{ - struct AES_CTX *ctx = crypto_tfm_ctx(tfm); - AES_decrypt(src, dst, &ctx->dec_key); -} - -static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, - unsigned int key_len) -{ - struct AES_CTX *ctx = crypto_tfm_ctx(tfm); - - switch (key_len) { - case AES_KEYSIZE_128: - key_len = 128; - break; - case AES_KEYSIZE_192: - key_len = 192; - break; - case AES_KEYSIZE_256: - key_len = 256; - break; - default: - tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; - return -EINVAL; - } - - if (private_AES_set_encrypt_key(in_key, key_len, &ctx->enc_key) == -1) { - tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; - return -EINVAL; - } - /* private_AES_set_decrypt_key expects an encryption key as input */ - ctx->dec_key = ctx->enc_key; - if (private_AES_set_decrypt_key(in_key, key_len, &ctx->dec_key) == -1) { - tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; - return -EINVAL; - } - return 0; -} - -static struct crypto_alg aes_alg = { - .cra_name = "aes", - .cra_driver_name = "aes-asm", - .cra_priority = 200, - .cra_flags = CRYPTO_ALG_TYPE_CIPHER, - .cra_blocksize = AES_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct AES_CTX), - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT(aes_alg.cra_list), - .cra_u = { - .cipher = { - .cia_min_keysize = AES_MIN_KEY_SIZE, - .cia_max_keysize = AES_MAX_KEY_SIZE, - .cia_setkey = aes_set_key, - .cia_encrypt = aes_encrypt, - .cia_decrypt = aes_decrypt - } - } -}; - -static int __init aes_init(void) -{ - return crypto_register_alg(&aes_alg); -} - -static void __exit aes_fini(void) -{ - crypto_unregister_alg(&aes_alg); -} - -module_init(aes_init); -module_exit(aes_fini); - -MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm (ASM)"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CRYPTO("aes"); -MODULE_ALIAS_CRYPTO("aes-asm"); -MODULE_AUTHOR("David McCullough <ucdevel@gmail.com>"); diff --git a/arch/arm/crypto/aes_glue.h b/arch/arm/crypto/aes_glue.h deleted file mode 100644 index cca3e51eb606..000000000000 --- a/arch/arm/crypto/aes_glue.h +++ /dev/null @@ -1,19 +0,0 @@ - -#define AES_MAXNR 14 - -struct AES_KEY { - unsigned int rd_key[4 * (AES_MAXNR + 1)]; - int rounds; -}; - -struct AES_CTX { - struct AES_KEY enc_key; - struct AES_KEY dec_key; -}; - -asmlinkage void AES_encrypt(const u8 *in, u8 *out, struct AES_KEY *ctx); -asmlinkage void AES_decrypt(const u8 *in, u8 *out, struct AES_KEY *ctx); -asmlinkage int private_AES_set_decrypt_key(const unsigned char *userKey, - const int bits, struct AES_KEY *key); -asmlinkage int private_AES_set_encrypt_key(const unsigned char *userKey, - const int bits, struct AES_KEY *key); diff --git a/arch/arm/crypto/aesbs-core.S_shipped b/arch/arm/crypto/aesbs-core.S_shipped deleted file mode 100644 index 1d1800f71c5b..000000000000 --- a/arch/arm/crypto/aesbs-core.S_shipped +++ /dev/null @@ -1,2548 +0,0 @@ - -@ ==================================================================== -@ Written by Andy Polyakov <appro@openssl.org> for the OpenSSL -@ project. The module is, however, dual licensed under OpenSSL and -@ CRYPTOGAMS licenses depending on where you obtain it. For further -@ details see http://www.openssl.org/~appro/cryptogams/. -@ -@ Specific modes and adaptation for Linux kernel by Ard Biesheuvel -@ <ard.biesheuvel@linaro.org>. Permission to use under GPL terms is -@ granted. -@ ==================================================================== - -@ Bit-sliced AES for ARM NEON -@ -@ February 2012. -@ -@ This implementation is direct adaptation of bsaes-x86_64 module for -@ ARM NEON. Except that this module is endian-neutral [in sense that -@ it can be compiled for either endianness] by courtesy of vld1.8's -@ neutrality. Initial version doesn't implement interface to OpenSSL, -@ only low-level primitives and unsupported entry points, just enough -@ to collect performance results, which for Cortex-A8 core are: -@ -@ encrypt 19.5 cycles per byte processed with 128-bit key -@ decrypt 22.1 cycles per byte processed with 128-bit key -@ key conv. 440 cycles per 128-bit key/0.18 of 8x block -@ -@ Snapdragon S4 encrypts byte in 17.6 cycles and decrypts in 19.7, -@ which is [much] worse than anticipated (for further details see -@ http://www.openssl.org/~appro/Snapdragon-S4.html). -@ -@ Cortex-A15 manages in 14.2/16.1 cycles [when integer-only code -@ manages in 20.0 cycles]. -@ -@ When comparing to x86_64 results keep in mind that NEON unit is -@ [mostly] single-issue and thus can't [fully] benefit from -@ instruction-level parallelism. And when comparing to aes-armv4 -@ results keep in mind key schedule conversion overhead (see -@ bsaes-x86_64.pl for further details)... -@ -@ <appro@openssl.org> - -@ April-August 2013 -@ -@ Add CBC, CTR and XTS subroutines, adapt for kernel use. -@ -@ <ard.biesheuvel@linaro.org> - -#ifndef __KERNEL__ -# include "arm_arch.h" - -# define VFP_ABI_PUSH vstmdb sp!,{d8-d15} -# define VFP_ABI_POP vldmia sp!,{d8-d15} -# define VFP_ABI_FRAME 0x40 -#else -# define VFP_ABI_PUSH -# define VFP_ABI_POP -# define VFP_ABI_FRAME 0 -# define BSAES_ASM_EXTENDED_KEY -# define XTS_CHAIN_TWEAK -# define __ARM_ARCH__ __LINUX_ARM_ARCH__ -# define __ARM_MAX_ARCH__ 7 -#endif - -#ifdef __thumb__ -# define adrl adr -#endif - -#if __ARM_MAX_ARCH__>=7 -.arch armv7-a -.fpu neon - -.text -.syntax unified @ ARMv7-capable assembler is expected to handle this -#ifdef __thumb2__ -.thumb -#else -.code 32 -#endif - -.type _bsaes_decrypt8,%function -.align 4 -_bsaes_decrypt8: - adr r6,_bsaes_decrypt8 - vldmia r4!, {q9} @ round 0 key - add r6,r6,#.LM0ISR-_bsaes_decrypt8 - - vldmia r6!, {q8} @ .LM0ISR - veor q10, q0, q9 @ xor with round0 key - veor q11, q1, q9 - vtbl.8 d0, {q10}, d16 - vtbl.8 d1, {q10}, d17 - veor q12, q2, q9 - vtbl.8 d2, {q11}, d16 - vtbl.8 d3, {q11}, d17 - veor q13, q3, q9 - vtbl.8 d4, {q12}, d16 - vtbl.8 d5, {q12}, d17 - veor q14, q4, q9 - vtbl.8 d6, {q13}, d16 - vtbl.8 d7, {q13}, d17 - veor q15, q5, q9 - vtbl.8 d8, {q14}, d16 - vtbl.8 d9, {q14}, d17 - veor q10, q6, q9 - vtbl.8 d10, {q15}, d16 - vtbl.8 d11, {q15}, d17 - veor q11, q7, q9 - vtbl.8 d12, {q10}, d16 - vtbl.8 d13, {q10}, d17 - vtbl.8 d14, {q11}, d16 - vtbl.8 d15, {q11}, d17 - vmov.i8 q8,#0x55 @ compose .LBS0 - vmov.i8 q9,#0x33 @ compose .LBS1 - vshr.u64 q10, q6, #1 - vshr.u64 q11, q4, #1 - veor q10, q10, q7 - veor q11, q11, q5 - vand q10, q10, q8 - vand q11, q11, q8 - veor q7, q7, q10 - vshl.u64 q10, q10, #1 - veor q5, q5, q11 - vshl.u64 q11, q11, #1 - veor q6, q6, q10 - veor q4, q4, q11 - vshr.u64 q10, q2, #1 - vshr.u64 q11, q0, #1 - veor q10, q10, q3 - veor q11, q11, q1 - vand q10, q10, q8 - vand q11, q11, q8 - veor q3, q3, q10 - vshl.u64 q10, q10, #1 - veor q1, q1, q11 - vshl.u64 q11, q11, #1 - veor q2, q2, q10 - veor q0, q0, q11 - vmov.i8 q8,#0x0f @ compose .LBS2 - vshr.u64 q10, q5, #2 - vshr.u64 q11, q4, #2 - veor q10, q10, q7 - veor q11, q11, q6 - vand q10, q10, q9 - vand q11, q11, q9 - veor q7, q7, q10 - vshl.u64 q10, q10, #2 - veor q6, q6, q11 - vshl.u64 q11, q11, #2 - veor q5, q5, q10 - veor q4, q4, q11 - vshr.u64 q10, q1, #2 - vshr.u64 q11, q0, #2 - veor q10, q10, q3 - veor q11, q11, q2 - vand q10, q10, q9 - vand q11, q11, q9 - veor q3, q3, q10 - vshl.u64 q10, q10, #2 - veor q2, q2, q11 - vshl.u64 q11, q11, #2 - veor q1, q1, q10 - veor q0, q0, q11 - vshr.u64 q10, q3, #4 - vshr.u64 q11, q2, #4 - veor q10, q10, q7 - veor q11, q11, q6 - vand q10, q10, q8 - vand q11, q11, q8 - veor q7, q7, q10 - vshl.u64 q10, q10, #4 - veor q6, q6, q11 - vshl.u64 q11, q11, #4 - veor q3, q3, q10 - veor q2, q2, q11 - vshr.u64 q10, q1, #4 - vshr.u64 q11, q0, #4 - veor q10, q10, q5 - veor q11, q11, q4 - vand q10, q10, q8 - vand q11, q11, q8 - veor q5, q5, q10 - vshl.u64 q10, q10, #4 - veor q4, q4, q11 - vshl.u64 q11, q11, #4 - veor q1, q1, q10 - veor q0, q0, q11 - sub r5,r5,#1 - b .Ldec_sbox -.align 4 -.Ldec_loop: - vldmia r4!, {q8-q11} - veor q8, q8, q0 - veor q9, q9, q1 - vtbl.8 d0, {q8}, d24 - vtbl.8 d1, {q8}, d25 - vldmia r4!, {q8} - veor q10, q10, q2 - vtbl.8 d2, {q9}, d24 - vtbl.8 d3, {q9}, d25 - vldmia r4!, {q9} - veor q11, q11, q3 - vtbl.8 d4, {q10}, d24 - vtbl.8 d5, {q10}, d25 - vldmia r4!, {q10} - vtbl.8 d6, {q11}, d24 - vtbl.8 d7, {q11}, d25 - vldmia r4!, {q11} - veor q8, q8, q4 - veor q9, q9, q5 - vtbl.8 d8, {q8}, d24 - vtbl.8 d9, {q8}, d25 - veor q10, q10, q6 - vtbl.8 d10, {q9}, d24 - vtbl.8 d11, {q9}, d25 - veor q11, q11, q7 - vtbl.8 d12, {q10}, d24 - vtbl.8 d13, {q10}, d25 - vtbl.8 d14, {q11}, d24 - vtbl.8 d15, {q11}, d25 -.Ldec_sbox: - veor q1, q1, q4 - veor q3, q3, q4 - - veor q4, q4, q7 - veor q1, q1, q6 - veor q2, q2, q7 - veor q6, q6, q4 - - veor q0, q0, q1 - veor q2, q2, q5 - veor q7, q7, q6 - veor q3, q3, q0 - veor q5, q5, q0 - veor q1, q1, q3 - veor q11, q3, q0 - veor q10, q7, q4 - veor q9, q1, q6 - veor q13, q4, q0 - vmov q8, q10 - veor q12, q5, q2 - - vorr q10, q10, q9 - veor q15, q11, q8 - vand q14, q11, q12 - vorr q11, q11, q12 - veor q12, q12, q9 - vand q8, q8, q9 - veor q9, q6, q2 - vand q15, q15, q12 - vand q13, q13, q9 - veor q9, q3, q7 - veor q12, q1, q5 - veor q11, q11, q13 - veor q10, q10, q13 - vand q13, q9, q12 - vorr q9, q9, q12 - veor q11, q11, q15 - veor q8, q8, q13 - veor q10, q10, q14 - veor q9, q9, q15 - veor q8, q8, q14 - vand q12, q4, q6 - veor q9, q9, q14 - vand q13, q0, q2 - vand q14, q7, q1 - vorr q15, q3, q5 - veor q11, q11, q12 - veor q9, q9, q14 - veor q8, q8, q15 - veor q10, q10, q13 - - @ Inv_GF16 0, 1, 2, 3, s0, s1, s2, s3 - - @ new smaller inversion - - vand q14, q11, q9 - vmov q12, q8 - - veor q13, q10, q14 - veor q15, q8, q14 - veor q14, q8, q14 @ q14=q15 - - vbsl q13, q9, q8 - vbsl q15, q11, q10 - veor q11, q11, q10 - - vbsl q12, q13, q14 - vbsl q8, q14, q13 - - vand q14, q12, q15 - veor q9, q9, q8 - - veor q14, q14, q11 - veor q12, q5, q2 - veor q8, q1, q6 - veor q10, q15, q14 - vand q10, q10, q5 - veor q5, q5, q1 - vand q11, q1, q15 - vand q5, q5, q14 - veor q1, q11, q10 - veor q5, q5, q11 - veor q15, q15, q13 - veor q14, q14, q9 - veor q11, q15, q14 - veor q10, q13, q9 - vand q11, q11, q12 - vand q10, q10, q2 - veor q12, q12, q8 - veor q2, q2, q6 - vand q8, q8, q15 - vand q6, q6, q13 - vand q12, q12, q14 - vand q2, q2, q9 - veor q8, q8, q12 - veor q2, q2, q6 - veor q12, q12, q11 - veor q6, q6, q10 - veor q5, q5, q12 - veor q2, q2, q12 - veor q1, q1, q8 - veor q6, q6, q8 - - veor q12, q3, q0 - veor q8, q7, q4 - veor q11, q15, q14 - veor q10, q13, q9 - vand q11, q11, q12 - vand q10, q10, q0 - veor q12, q12, q8 - veor q0, q0, q4 - vand q8, q8, q15 - vand q4, q4, q13 - vand q12, q12, q14 - vand q0, q0, q9 - veor q8, q8, q12 - veor q0, q0, q4 - veor q12, q12, q11 - veor q4, q4, q10 - veor q15, q15, q13 - veor q14, q14, q9 - veor q10, q15, q14 - vand q10, q10, q3 - veor q3, q3, q7 - vand q11, q7, q15 - vand q3, q3, q14 - veor q7, q11, q10 - veor q3, q3, q11 - veor q3, q3, q12 - veor q0, q0, q12 - veor q7, q7, q8 - veor q4, q4, q8 - veor q1, q1, q7 - veor q6, q6, q5 - - veor q4, q4, q1 - veor q2, q2, q7 - veor q5, q5, q7 - veor q4, q4, q2 - veor q7, q7, q0 - veor q4, q4, q5 - veor q3, q3, q6 - veor q6, q6, q1 - veor q3, q3, q4 - - veor q4, q4, q0 - veor q7, q7, q3 - subs r5,r5,#1 - bcc .Ldec_done - @ multiplication by 0x05-0x00-0x04-0x00 - vext.8 q8, q0, q0, #8 - vext.8 q14, q3, q3, #8 - vext.8 q15, q5, q5, #8 - veor q8, q8, q0 - vext.8 q9, q1, q1, #8 - veor q14, q14, q3 - vext.8 q10, q6, q6, #8 - veor q15, q15, q5 - vext.8 q11, q4, q4, #8 - veor q9, q9, q1 - vext.8 q12, q2, q2, #8 - veor q10, q10, q6 - vext.8 q13, q7, q7, #8 - veor q11, q11, q4 - veor q12, q12, q2 - veor q13, q13, q7 - - veor q0, q0, q14 - veor q1, q1, q14 - veor q6, q6, q8 - veor q2, q2, q10 - veor q4, q4, q9 - veor q1, q1, q15 - veor q6, q6, q15 - veor q2, q2, q14 - veor q7, q7, q11 - veor q4, q4, q14 - veor q3, q3, q12 - veor q2, q2, q15 - veor q7, q7, q15 - veor q5, q5, q13 - vext.8 q8, q0, q0, #12 @ x0 <<< 32 - vext.8 q9, q1, q1, #12 - veor q0, q0, q8 @ x0 ^ (x0 <<< 32) - vext.8 q10, q6, q6, #12 - veor q1, q1, q9 - vext.8 q11, q4, q4, #12 - veor q6, q6, q10 - vext.8 q12, q2, q2, #12 - veor q4, q4, q11 - vext.8 q13, q7, q7, #12 - veor q2, q2, q12 - vext.8 q14, q3, q3, #12 - veor q7, q7, q13 - vext.8 q15, q5, q5, #12 - veor q3, q3, q14 - - veor q9, q9, q0 - veor q5, q5, q15 - vext.8 q0, q0, q0, #8 @ (x0 ^ (x0 <<< 32)) <<< 64) - veor q10, q10, q1 - veor q8, q8, q5 - veor q9, q9, q5 - vext.8 q1, q1, q1, #8 - veor q13, q13, q2 - veor q0, q0, q8 - veor q14, q14, q7 - veor q1, q1, q9 - vext.8 q8, q2, q2, #8 - veor q12, q12, q4 - vext.8 q9, q7, q7, #8 - veor q15, q15, q3 - vext.8 q2, q4, q4, #8 - veor q11, q11, q6 - vext.8 q7, q5, q5, #8 - veor q12, q12, q5 - vext.8 q4, q3, q3, #8 - veor q11, q11, q5 - vext.8 q3, q6, q6, #8 - veor q5, q9, q13 - veor q11, q11, q2 - veor q7, q7, q15 - veor q6, q4, q14 - veor q4, q8, q12 - veor q2, q3, q10 - vmov q3, q11 - @ vmov q5, q9 - vldmia r6, {q12} @ .LISR - ite eq @ Thumb2 thing, sanity check in ARM - addeq r6,r6,#0x10 - bne .Ldec_loop - vldmia r6, {q12} @ .LISRM0 - b .Ldec_loop -.align 4 -.Ldec_done: - vmov.i8 q8,#0x55 @ compose .LBS0 - vmov.i8 q9,#0x33 @ compose .LBS1 - vshr.u64 q10, q3, #1 - vshr.u64 q11, q2, #1 - veor q10, q10, q5 - veor q11, q11, q7 - vand q10, q10, q8 - vand q11, q11, q8 - veor q5, q5, q10 - vshl.u64 q10, q10, #1 - veor q7, q7, q11 - vshl.u64 q11, q11, #1 - veor q3, q3, q10 - veor q2, q2, q11 - vshr.u64 q10, q6, #1 - vshr.u64 q11, q0, #1 - veor q10, q10, q4 - veor q11, q11, q1 - vand q10, q10, q8 - vand q11, q11, q8 - veor q4, q4, q10 - vshl.u64 q10, q10, #1 - veor q1, q1, q11 - vshl.u64 q11, q11, #1 - veor q6, q6, q10 - veor q0, q0, q11 - vmov.i8 q8,#0x0f @ compose .LBS2 - vshr.u64 q10, q7, #2 - vshr.u64 q11, q2, #2 - veor q10, q10, q5 - veor q11, q11, q3 - vand q10, q10, q9 - vand q11, q11, q9 - veor q5, q5, q10 - vshl.u64 q10, q10, #2 - veor q3, q3, q11 - vshl.u64 q11, q11, #2 - veor q7, q7, q10 - veor q2, q2, q11 - vshr.u64 q10, q1, #2 - vshr.u64 q11, q0, #2 - veor q10, q10, q4 - veor q11, q11, q6 - vand q10, q10, q9 - vand q11, q11, q9 - veor q4, q4, q10 - vshl.u64 q10, q10, #2 - veor q6, q6, q11 - vshl.u64 q11, q11, #2 - veor q1, q1, q10 - veor q0, q0, q11 - vshr.u64 q10, q4, #4 - vshr.u64 q11, q6, #4 - veor q10, q10, q5 - veor q11, q11, q3 - vand q10, q10, q8 - vand q11, q11, q8 - veor q5, q5, q10 - vshl.u64 q10, q10, #4 - veor q3, q3, q11 - vshl.u64 q11, q11, #4 - veor q4, q4, q10 - veor q6, q6, q11 - vshr.u64 q10, q1, #4 - vshr.u64 q11, q0, #4 - veor q10, q10, q7 - veor q11, q11, q2 - vand q10, q10, q8 - vand q11, q11, q8 - veor q7, q7, q10 - vshl.u64 q10, q10, #4 - veor q2, q2, q11 - vshl.u64 q11, q11, #4 - veor q1, q1, q10 - veor q0, q0, q11 - vldmia r4, {q8} @ last round key - veor q6, q6, q8 - veor q4, q4, q8 - veor q2, q2, q8 - veor q7, q7, q8 - veor q3, q3, q8 - veor q5, q5, q8 - veor q0, q0, q8 - veor q1, q1, q8 - bx lr -.size _bsaes_decrypt8,.-_bsaes_decrypt8 - -.type _bsaes_const,%object -.align 6 -_bsaes_const: -.LM0ISR: @ InvShiftRows constants - .quad 0x0a0e0206070b0f03, 0x0004080c0d010509 -.LISR: - .quad 0x0504070602010003, 0x0f0e0d0c080b0a09 -.LISRM0: - .quad 0x01040b0e0205080f, 0x0306090c00070a0d -.LM0SR: @ ShiftRows constants - .quad 0x0a0e02060f03070b, 0x0004080c05090d01 -.LSR: - .quad 0x0504070600030201, 0x0f0e0d0c0a09080b -.LSRM0: - .quad 0x0304090e00050a0f, 0x01060b0c0207080d -.LM0: - .quad 0x02060a0e03070b0f, 0x0004080c0105090d -.LREVM0SR: - .quad 0x090d01050c000408, 0x03070b0f060a0e02 -.asciz "Bit-sliced AES for NEON, CRYPTOGAMS by <appro@openssl.org>" -.align 6 -.size _bsaes_const,.-_bsaes_const - -.type _bsaes_encrypt8,%function -.align 4 -_bsaes_encrypt8: - adr r6,_bsaes_encrypt8 - vldmia r4!, {q9} @ round 0 key - sub r6,r6,#_bsaes_encrypt8-.LM0SR - - vldmia r6!, {q8} @ .LM0SR -_bsaes_encrypt8_alt: - veor q10, q0, q9 @ xor with round0 key - veor q11, q1, q9 - vtbl.8 d0, {q10}, d16 - vtbl.8 d1, {q10}, d17 - veor q12, q2, q9 - vtbl.8 d2, {q11}, d16 - vtbl.8 d3, {q11}, d17 - veor q13, q3, q9 - vtbl.8 d4, {q12}, d16 - vtbl.8 d5, {q12}, d17 - veor q14, q4, q9 - vtbl.8 d6, {q13}, d16 - vtbl.8 d7, {q13}, d17 - veor q15, q5, q9 - vtbl.8 d8, {q14}, d16 - vtbl.8 d9, {q14}, d17 - veor q10, q6, q9 - vtbl.8 d10, {q15}, d16 - vtbl.8 d11, {q15}, d17 - veor q11, q7, q9 - vtbl.8 d12, {q10}, d16 - vtbl.8 d13, {q10}, d17 - vtbl.8 d14, {q11}, d16 - vtbl.8 d15, {q11}, d17 -_bsaes_encrypt8_bitslice: - vmov.i8 q8,#0x55 @ compose .LBS0 - vmov.i8 q9,#0x33 @ compose .LBS1 - vshr.u64 q10, q6, #1 - vshr.u64 q11, q4, #1 - veor q10, q10, q7 - veor q11, q11, q5 - vand q10, q10, q8 - vand q11, q11, q8 - veor q7, q7, q10 - vshl.u64 q10, q10, #1 - veor q5, q5, q11 - vshl.u64 q11, q11, #1 - veor q6, q6, q10 - veor q4, q4, q11 - vshr.u64 q10, q2, #1 - vshr.u64 q11, q0, #1 - veor q10, q10, q3 - veor q11, q11, q1 - vand q10, q10, q8 - vand q11, q11, q8 - veor q3, q3, q10 - vshl.u64 q10, q10, #1 - veor q1, q1, q11 - vshl.u64 q11, q11, #1 - veor q2, q2, q10 - veor q0, q0, q11 - vmov.i8 q8,#0x0f @ compose .LBS2 - vshr.u64 q10, q5, #2 - vshr.u64 q11, q4, #2 - veor q10, q10, q7 - veor q11, q11, q6 - vand q10, q10, q9 - vand q11, q11, q9 - veor q7, q7, q10 - vshl.u64 q10, q10, #2 - veor q6, q6, q11 - vshl.u64 q11, q11, #2 - veor q5, q5, q10 - veor q4, q4, q11 - vshr.u64 q10, q1, #2 - vshr.u64 q11, q0, #2 - veor q10, q10, q3 - veor q11, q11, q2 - vand q10, q10, q9 - vand q11, q11, q9 - veor q3, q3, q10 - vshl.u64 q10, q10, #2 - veor q2, q2, q11 - vshl.u64 q11, q11, #2 - veor q1, q1, q10 - veor q0, q0, q11 - vshr.u64 q10, q3, #4 - vshr.u64 q11, q2, #4 - veor q10, q10, q7 - veor q11, q11, q6 - vand q10, q10, q8 - vand q11, q11, q8 - veor q7, q7, q10 - vshl.u64 q10, q10, #4 - veor q6, q6, q11 - vshl.u64 q11, q11, #4 - veor q3, q3, q10 - veor q2, q2, q11 - vshr.u64 q10, q1, #4 - vshr.u64 q11, q0, #4 - veor q10, q10, q5 - veor q11, q11, q4 - vand q10, q10, q8 - vand q11, q11, q8 - veor q5, q5, q10 - vshl.u64 q10, q10, #4 - veor q4, q4, q11 - vshl.u64 q11, q11, #4 - veor q1, q1, q10 - veor q0, q0, q11 - sub r5,r5,#1 - b .Lenc_sbox -.align 4 -.Lenc_loop: - vldmia r4!, {q8-q11} - veor q8, q8, q0 - veor q9, q9, q1 - vtbl.8 d0, {q8}, d24 - vtbl.8 d1, {q8}, d25 - vldmia r4!, {q8} - veor q10, q10, q2 - vtbl.8 d2, {q9}, d24 - vtbl.8 d3, {q9}, d25 - vldmia r4!, {q9} - veor q11, q11, q3 - vtbl.8 d4, {q10}, d24 - vtbl.8 d5, {q10}, d25 - vldmia r4!, {q10} - vtbl.8 d6, {q11}, d24 - vtbl.8 d7, {q11}, d25 - vldmia r4!, {q11} - veor q8, q8, q4 - veor q9, q9, q5 - vtbl.8 d8, {q8}, d24 - vtbl.8 d9, {q8}, d25 - veor q10, q10, q6 - vtbl.8 d10, {q9}, d24 - vtbl.8 d11, {q9}, d25 - veor q11, q11, q7 - vtbl.8 d12, {q10}, d24 - vtbl.8 d13, {q10}, d25 - vtbl.8 d14, {q11}, d24 - vtbl.8 d15, {q11}, d25 -.Lenc_sbox: - veor q2, q2, q1 - veor q5, q5, q6 - veor q3, q3, q0 - veor q6, q6, q2 - veor q5, q5, q0 - - veor q6, q6, q3 - veor q3, q3, q7 - veor q7, q7, q5 - veor q3, q3, q4 - veor q4, q4, q5 - - veor q2, q2, q7 - veor q3, q3, q1 - veor q1, q1, q5 - veor q11, q7, q4 - veor q10, q1, q2 - veor q9, q5, q3 - veor q13, q2, q4 - vmov q8, q10 - veor q12, q6, q0 - - vorr q10, q10, q9 - veor q15, q11, q8 - vand q14, q11, q12 - vorr q11, q11, q12 - veor q12, q12, q9 - vand q8, q8, q9 - veor q9, q3, q0 - vand q15, q15, q12 - vand q13, q13, q9 - veor q9, q7, q1 - veor q12, q5, q6 - veor q11, q11, q13 - veor q10, q10, q13 - vand q13, q9, q12 - vorr q9, q9, q12 - veor q11, q11, q15 - veor q8, q8, q13 - veor q10, q10, q14 - veor q9, q9, q15 - veor q8, q8, q14 - vand q12, q2, q3 - veor q9, q9, q14 - vand q13, q4, q0 - vand q14, q1, q5 - vorr q15, q7, q6 - veor q11, q11, q12 - veor q9, q9, q14 - veor q8, q8, q15 - veor q10, q10, q13 - - @ Inv_GF16 0, 1, 2, 3, s0, s1, s2, s3 - - @ new smaller inversion - - vand q14, q11, q9 - vmov q12, q8 - - veor q13, q10, q14 - veor q15, q8, q14 - veor q14, q8, q14 @ q14=q15 - - vbsl q13, q9, q8 - vbsl q15, q11, q10 - veor q11, q11, q10 - - vbsl q12, q13, q14 - vbsl q8, q14, q13 - - vand q14, q12, q15 - veor q9, q9, q8 - - veor q14, q14, q11 - veor q12, q6, q0 - veor q8, q5, q3 - veor q10, q15, q14 - vand q10, q10, q6 - veor q6, q6, q5 - vand q11, q5, q15 - vand q6, q6, q14 - veor q5, q11, q10 - veor q6, q6, q11 - veor q15, q15, q13 - veor q14, q14, q9 - veor q11, q15, q14 - veor q10, q13, q9 - vand q11, q11, q12 - vand q10, q10, q0 - veor q12, q12, q8 - veor q0, q0, q3 - vand q8, q8, q15 - vand q3, q3, q13 - vand q12, q12, q14 - vand q0, q0, q9 - veor q8, q8, q12 - veor q0, q0, q3 - veor q12, q12, q11 - veor q3, q3, q10 - veor q6, q6, q12 - veor q0, q0, q12 - veor q5, q5, q8 - veor q3, q3, q8 - - veor q12, q7, q4 - veor q8, q1, q2 - veor q11, q15, q14 - veor q10, q13, q9 - vand q11, q11, q12 - vand q10, q10, q4 - veor q12, q12, q8 - veor q4, q4, q2 - vand q8, q8, q15 - vand q2, q2, q13 - vand q12, q12, q14 - vand q4, q4, q9 - veor q8, q8, q12 - veor q4, q4, q2 - veor q12, q12, q11 - veor q2, q2, q10 - veor q15, q15, q13 - veor q14, q14, q9 - veor q10, q15, q14 - vand q10, q10, q7 - veor q7, q7, q1 - vand q11, q1, q15 - vand q7, q7, q14 - veor q1, q11, q10 - veor q7, q7, q11 - veor q7, q7, q12 - veor q4, q4, q12 - veor q1, q1, q8 - veor q2, q2, q8 - veor q7, q7, q0 - veor q1, q1, q6 - veor q6, q6, q0 - veor q4, q4, q7 - veor q0, q0, q1 - - veor q1, q1, q5 - veor q5, q5, q2 - veor q2, q2, q3 - veor q3, q3, q5 - veor q4, q4, q5 - - veor q6, q6, q3 - subs r5,r5,#1 - bcc .Lenc_done - vext.8 q8, q0, q0, #12 @ x0 <<< 32 - vext.8 q9, q1, q1, #12 - veor q0, q0, q8 @ x0 ^ (x0 <<< 32) - vext.8 q10, q4, q4, #12 - veor q1, q1, q9 - vext.8 q11, q6, q6, #12 - veor q4, q4, q10 - vext.8 q12, q3, q3, #12 - veor q6, q6, q11 - vext.8 q13, q7, q7, #12 - veor q3, q3, q12 - vext.8 q14, q2, q2, #12 - veor q7, q7, q13 - vext.8 q15, q5, q5, #12 - veor q2, q2, q14 - - veor q9, q9, q0 - veor q5, q5, q15 - vext.8 q0, q0, q0, #8 @ (x0 ^ (x0 <<< 32)) <<< 64) - veor q10, q10, q1 - veor q8, q8, q5 - veor q9, q9, q5 - vext.8 q1, q1, q1, #8 - veor q13, q13, q3 - veor q0, q0, q8 - veor q14, q14, q7 - veor q1, q1, q9 - vext.8 q8, q3, q3, #8 - veor q12, q12, q6 - vext.8 q9, q7, q7, #8 - veor q15, q15, q2 - vext.8 q3, q6, q6, #8 - veor q11, q11, q4 - vext.8 q7, q5, q5, #8 - veor q12, q12, q5 - vext.8 q6, q2, q2, #8 - veor q11, q11, q5 - vext.8 q2, q4, q4, #8 - veor q5, q9, q13 - veor q4, q8, q12 - veor q3, q3, q11 - veor q7, q7, q15 - veor q6, q6, q14 - @ vmov q4, q8 - veor q2, q2, q10 - @ vmov q5, q9 - vldmia r6, {q12} @ .LSR - ite eq @ Thumb2 thing, samity check in ARM - addeq r6,r6,#0x10 - bne .Lenc_loop - vldmia r6, {q12} @ .LSRM0 - b .Lenc_loop -.align 4 -.Lenc_done: - vmov.i8 q8,#0x55 @ compose .LBS0 - vmov.i8 q9,#0x33 @ compose .LBS1 - vshr.u64 q10, q2, #1 - vshr.u64 q11, q3, #1 - veor q10, q10, q5 - veor q11, q11, q7 - vand q10, q10, q8 - vand q11, q11, q8 - veor q5, q5, q10 - vshl.u64 q10, q10, #1 - veor q7, q7, q11 - vshl.u64 q11, q11, #1 - veor q2, q2, q10 - veor q3, q3, q11 - vshr.u64 q10, q4, #1 - vshr.u64 q11, q0, #1 - veor q10, q10, q6 - veor q11, q11, q1 - vand q10, q10, q8 - vand q11, q11, q8 - veor q6, q6, q10 - vshl.u64 q10, q10, #1 - veor q1, q1, q11 - vshl.u64 q11, q11, #1 - veor q4, q4, q10 - veor q0, q0, q11 - vmov.i8 q8,#0x0f @ compose .LBS2 - vshr.u64 q10, q7, #2 - vshr.u64 q11, q3, #2 - veor q10, q10, q5 - veor q11, q11, q2 - vand q10, q10, q9 - vand q11, q11, q9 - veor q5, q5, q10 - vshl.u64 q10, q10, #2 - veor q2, q2, q11 - vshl.u64 q11, q11, #2 - veor q7, q7, q10 - veor q3, q3, q11 - vshr.u64 q10, q1, #2 - vshr.u64 q11, q0, #2 - veor q10, q10, q6 - veor q11, q11, q4 - vand q10, q10, q9 - vand q11, q11, q9 - veor q6, q6, q10 - vshl.u64 q10, q10, #2 - veor q4, q4, q11 - vshl.u64 q11, q11, #2 - veor q1, q1, q10 - veor q0, q0, q11 - vshr.u64 q10, q6, #4 - vshr.u64 q11, q4, #4 - veor q10, q10, q5 - veor q11, q11, q2 - vand q10, q10, q8 - vand q11, q11, q8 - veor q5, q5, q10 - vshl.u64 q10, q10, #4 - veor q2, q2, q11 - vshl.u64 q11, q11, #4 - veor q6, q6, q10 - veor q4, q4, q11 - vshr.u64 q10, q1, #4 - vshr.u64 q11, q0, #4 - veor q10, q10, q7 - veor q11, q11, q3 - vand q10, q10, q8 - vand q11, q11, q8 - veor q7, q7, q10 - vshl.u64 q10, q10, #4 - veor q3, q3, q11 - vshl.u64 q11, q11, #4 - veor q1, q1, q10 - veor q0, q0, q11 - vldmia r4, {q8} @ last round key - veor q4, q4, q8 - veor q6, q6, q8 - veor q3, q3, q8 - veor q7, q7, q8 - veor q2, q2, q8 - veor q5, q5, q8 - veor q0, q0, q8 - veor q1, q1, q8 - bx lr -.size _bsaes_encrypt8,.-_bsaes_encrypt8 -.type _bsaes_key_convert,%function -.align 4 -_bsaes_key_convert: - adr r6,_bsaes_key_convert - vld1.8 {q7}, [r4]! @ load round 0 key - sub r6,r6,#_bsaes_key_convert-.LM0 - vld1.8 {q15}, [r4]! @ load round 1 key - - vmov.i8 q8, #0x01 @ bit masks - vmov.i8 q9, #0x02 - vmov.i8 q10, #0x04 - vmov.i8 q11, #0x08 - vmov.i8 q12, #0x10 - vmov.i8 q13, #0x20 - vldmia r6, {q14} @ .LM0 - -#ifdef __ARMEL__ - vrev32.8 q7, q7 - vrev32.8 q15, q15 -#endif - sub r5,r5,#1 - vstmia r12!, {q7} @ save round 0 key - b .Lkey_loop - -.align 4 -.Lkey_loop: - vtbl.8 d14,{q15},d28 - vtbl.8 d15,{q15},d29 - vmov.i8 q6, #0x40 - vmov.i8 q15, #0x80 - - vtst.8 q0, q7, q8 - vtst.8 q1, q7, q9 - vtst.8 q2, q7, q10 - vtst.8 q3, q7, q11 - vtst.8 q4, q7, q12 - vtst.8 q5, q7, q13 - vtst.8 q6, q7, q6 - vtst.8 q7, q7, q15 - vld1.8 {q15}, [r4]! @ load next round key - vmvn q0, q0 @ "pnot" - vmvn q1, q1 - vmvn q5, q5 - vmvn q6, q6 -#ifdef __ARMEL__ - vrev32.8 q15, q15 -#endif - subs r5,r5,#1 - vstmia r12!,{q0-q7} @ write bit-sliced round key - bne .Lkey_loop - - vmov.i8 q7,#0x63 @ compose .L63 - @ don't save last round key - bx lr -.size _bsaes_key_convert,.-_bsaes_key_convert -.extern AES_cbc_encrypt -.extern AES_decrypt - -.global bsaes_cbc_encrypt -.type bsaes_cbc_encrypt,%function -.align 5 -bsaes_cbc_encrypt: -#ifndef __KERNEL__ - cmp r2, #128 -#ifndef __thumb__ - blo AES_cbc_encrypt -#else - bhs 1f - b AES_cbc_encrypt -1: -#endif -#endif - - @ it is up to the caller to make sure we are called with enc == 0 - - mov ip, sp - stmdb sp!, {r4-r10, lr} - VFP_ABI_PUSH - ldr r8, [ip] @ IV is 1st arg on the stack - mov r2, r2, lsr#4 @ len in 16 byte blocks - sub sp, #0x10 @ scratch space to carry over the IV - mov r9, sp @ save sp - - ldr r10, [r3, #240] @ get # of rounds -#ifndef BSAES_ASM_EXTENDED_KEY - @ allocate the key schedule on the stack - sub r12, sp, r10, lsl#7 @ 128 bytes per inner round key - add r12, #96 @ sifze of bit-slices key schedule - - @ populate the key schedule - mov r4, r3 @ pass key - mov r5, r10 @ pass # of rounds - mov sp, r12 @ sp is sp - bl _bsaes_key_convert - vldmia sp, {q6} - vstmia r12, {q15} @ save last round key - veor q7, q7, q6 @ fix up round 0 key - vstmia sp, {q7} -#else - ldr r12, [r3, #244] - eors r12, #1 - beq 0f - - @ populate the key schedule - str r12, [r3, #244] - mov r4, r3 @ pass key - mov r5, r10 @ pass # of rounds - add r12, r3, #248 @ pass key schedule - bl _bsaes_key_convert - add r4, r3, #248 - vldmia r4, {q6} - vstmia r12, {q15} @ save last round key - veor q7, q7, q6 @ fix up round 0 key - vstmia r4, {q7} - -.align 2 -0: -#endif - - vld1.8 {q15}, [r8] @ load IV - b .Lcbc_dec_loop - -.align 4 -.Lcbc_dec_loop: - subs r2, r2, #0x8 - bmi .Lcbc_dec_loop_finish - - vld1.8 {q0-q1}, [r0]! @ load input - vld1.8 {q2-q3}, [r0]! -#ifndef BSAES_ASM_EXTENDED_KEY - mov r4, sp @ pass the key -#else - add r4, r3, #248 -#endif - vld1.8 {q4-q5}, [r0]! - mov r5, r10 - vld1.8 {q6-q7}, [r0] - sub r0, r0, #0x60 - vstmia r9, {q15} @ put aside IV - - bl _bsaes_decrypt8 - - vldmia r9, {q14} @ reload IV - vld1.8 {q8-q9}, [r0]! @ reload input - veor q0, q0, q14 @ ^= IV - vld1.8 {q10-q11}, [r0]! - veor q1, q1, q8 - veor q6, q6, q9 - vld1.8 {q12-q13}, [r0]! - veor q4, q4, q10 - veor q2, q2, q11 - vld1.8 {q14-q15}, [r0]! - veor q7, q7, q12 - vst1.8 {q0-q1}, [r1]! @ write output - veor q3, q3, q13 - vst1.8 {q6}, [r1]! - veor q5, q5, q14 - vst1.8 {q4}, [r1]! - vst1.8 {q2}, [r1]! - vst1.8 {q7}, [r1]! - vst1.8 {q3}, [r1]! - vst1.8 {q5}, [r1]! - - b .Lcbc_dec_loop - -.Lcbc_dec_loop_finish: - adds r2, r2, #8 - beq .Lcbc_dec_done - - vld1.8 {q0}, [r0]! @ load input - cmp r2, #2 - blo .Lcbc_dec_one - vld1.8 {q1}, [r0]! -#ifndef BSAES_ASM_EXTENDED_KEY - mov r4, sp @ pass the key -#else - add r4, r3, #248 -#endif - mov r5, r10 - vstmia r9, {q15} @ put aside IV - beq .Lcbc_dec_two - vld1.8 {q2}, [r0]! - cmp r2, #4 - blo .Lcbc_dec_three - vld1.8 {q3}, [r0]! - beq .Lcbc_dec_four - vld1.8 {q4}, [r0]! - cmp r2, #6 - blo .Lcbc_dec_five - vld1.8 {q5}, [r0]! - beq .Lcbc_dec_six - vld1.8 {q6}, [r0]! - sub r0, r0, #0x70 - - bl _bsaes_decrypt8 - - vldmia r9, {q14} @ reload IV - vld1.8 {q8-q9}, [r0]! @ reload input - veor q0, q0, q14 @ ^= IV - vld1.8 {q10-q11}, [r0]! - veor q1, q1, q8 - veor q6, q6, q9 - vld1.8 {q12-q13}, [r0]! - veor q4, q4, q10 - veor q2, q2, q11 - vld1.8 {q15}, [r0]! - veor q7, q7, q12 - vst1.8 {q0-q1}, [r1]! @ write output - veor q3, q3, q13 - vst1.8 {q6}, [r1]! - vst1.8 {q4}, [r1]! - vst1.8 {q2}, [r1]! - vst1.8 {q7}, [r1]! - vst1.8 {q3}, [r1]! - b .Lcbc_dec_done -.align 4 -.Lcbc_dec_six: - sub r0, r0, #0x60 - bl _bsaes_decrypt8 - vldmia r9,{q14} @ reload IV - vld1.8 {q8-q9}, [r0]! @ reload input - veor q0, q0, q14 @ ^= IV - vld1.8 {q10-q11}, [r0]! - veor q1, q1, q8 - veor q6, q6, q9 - vld1.8 {q12}, [r0]! - veor q4, q4, q10 - veor q2, q2, q11 - vld1.8 {q15}, [r0]! - veor q7, q7, q12 - vst1.8 {q0-q1}, [r1]! @ write output - vst1.8 {q6}, [r1]! - vst1.8 {q4}, [r1]! - vst1.8 {q2}, [r1]! - vst1.8 {q7}, [r1]! - b .Lcbc_dec_done -.align 4 -.Lcbc_dec_five: - sub r0, r0, #0x50 - bl _bsaes_decrypt8 - vldmia r9, {q14} @ reload IV - vld1.8 {q8-q9}, [r0]! @ reload input - veor q0, q0, q14 @ ^= IV - vld1.8 {q10-q11}, [r0]! - veor q1, q1, q8 - veor q6, q6, q9 - vld1.8 {q15}, [r0]! - veor q4, q4, q10 - vst1.8 {q0-q1}, [r1]! @ write output - veor q2, q2, q11 - vst1.8 {q6}, [r1]! - vst1.8 {q4}, [r1]! - vst1.8 {q2}, [r1]! - b .Lcbc_dec_done -.align 4 -.Lcbc_dec_four: - sub r0, r0, #0x40 - bl _bsaes_decrypt8 - vldmia r9, {q14} @ reload IV - vld1.8 {q8-q9}, [r0]! @ reload input - veor q0, q0, q14 @ ^= IV - vld1.8 {q10}, [r0]! - veor q1, q1, q8 - veor q6, q6, q9 - vld1.8 {q15}, [r0]! - veor q4, q4, q10 - vst1.8 {q0-q1}, [r1]! @ write output - vst1.8 {q6}, [r1]! - vst1.8 {q4}, [r1]! - b .Lcbc_dec_done -.align 4 -.Lcbc_dec_three: - sub r0, r0, #0x30 - bl _bsaes_decrypt8 - vldmia r9, {q14} @ reload IV - vld1.8 {q8-q9}, [r0]! @ reload input - veor q0, q0, q14 @ ^= IV - vld1.8 {q15}, [r0]! - veor q1, q1, q8 - veor q6, q6, q9 - vst1.8 {q0-q1}, [r1]! @ write output - vst1.8 {q6}, [r1]! - b .Lcbc_dec_done -.align 4 -.Lcbc_dec_two: - sub r0, r0, #0x20 - bl _bsaes_decrypt8 - vldmia r9, {q14} @ reload IV - vld1.8 {q8}, [r0]! @ reload input - veor q0, q0, q14 @ ^= IV - vld1.8 {q15}, [r0]! @ reload input - veor q1, q1, q8 - vst1.8 {q0-q1}, [r1]! @ write output - b .Lcbc_dec_done -.align 4 -.Lcbc_dec_one: - sub r0, r0, #0x10 - mov r10, r1 @ save original out pointer - mov r1, r9 @ use the iv scratch space as out buffer - mov r2, r3 - vmov q4,q15 @ just in case ensure that IV - vmov q5,q0 @ and input are preserved - bl AES_decrypt - vld1.8 {q0}, [r9,:64] @ load result - veor q0, q0, q4 @ ^= IV - vmov q15, q5 @ q5 holds input - vst1.8 {q0}, [r10] @ write output - -.Lcbc_dec_done: -#ifndef BSAES_ASM_EXTENDED_KEY - vmov.i32 q0, #0 - vmov.i32 q1, #0 -.Lcbc_dec_bzero: @ wipe key schedule [if any] - vstmia sp!, {q0-q1} - cmp sp, r9 - bne .Lcbc_dec_bzero -#endif - - mov sp, r9 - add sp, #0x10 @ add sp,r9,#0x10 is no good for thumb - vst1.8 {q15}, [r8] @ return IV - VFP_ABI_POP - ldmia sp!, {r4-r10, pc} -.size bsaes_cbc_encrypt,.-bsaes_cbc_encrypt -.extern AES_encrypt -.global bsaes_ctr32_encrypt_blocks -.type bsaes_ctr32_encrypt_blocks,%function -.align 5 -bsaes_ctr32_encrypt_blocks: - cmp r2, #8 @ use plain AES for - blo .Lctr_enc_short @ small sizes - - mov ip, sp - stmdb sp!, {r4-r10, lr} - VFP_ABI_PUSH - ldr r8, [ip] @ ctr is 1st arg on the stack - sub sp, sp, #0x10 @ scratch space to carry over the ctr - mov r9, sp @ save sp - - ldr r10, [r3, #240] @ get # of rounds -#ifndef BSAES_ASM_EXTENDED_KEY - @ allocate the key schedule on the stack - sub r12, sp, r10, lsl#7 @ 128 bytes per inner round key - add r12, #96 @ size of bit-sliced key schedule - - @ populate the key schedule - mov r4, r3 @ pass key - mov r5, r10 @ pass # of rounds - mov sp, r12 @ sp is sp - bl _bsaes_key_convert - veor q7,q7,q15 @ fix up last round key - vstmia r12, {q7} @ save last round key - - vld1.8 {q0}, [r8] @ load counter - add r8, r6, #.LREVM0SR-.LM0 @ borrow r8 - vldmia sp, {q4} @ load round0 key -#else - ldr r12, [r3, #244] - eors r12, #1 - beq 0f - - @ populate the key schedule - str r12, [r3, #244] - mov r4, r3 @ pass key - mov r5, r10 @ pass # of rounds - add r12, r3, #248 @ pass key schedule - bl _bsaes_key_convert - veor q7,q7,q15 @ fix up last round key - vstmia r12, {q7} @ save last round key - -.align 2 -0: add r12, r3, #248 - vld1.8 {q0}, [r8] @ load counter - adrl r8, .LREVM0SR @ borrow r8 - vldmia r12, {q4} @ load round0 key - sub sp, #0x10 @ place for adjusted round0 key -#endif - - vmov.i32 q8,#1 @ compose 1<<96 - veor q9,q9,q9 - vrev32.8 q0,q0 - vext.8 q8,q9,q8,#4 - vrev32.8 q4,q4 - vadd.u32 q9,q8,q8 @ compose 2<<96 - vstmia sp, {q4} @ save adjusted round0 key - b .Lctr_enc_loop - -.align 4 -.Lctr_enc_loop: - vadd.u32 q10, q8, q9 @ compose 3<<96 - vadd.u32 q1, q0, q8 @ +1 - vadd.u32 q2, q0, q9 @ +2 - vadd.u32 q3, q0, q10 @ +3 - vadd.u32 q4, q1, q10 - vadd.u32 q5, q2, q10 - vadd.u32 q6, q3, q10 - vadd.u32 q7, q4, q10 - vadd.u32 q10, q5, q10 @ next counter - - @ Borrow prologue from _bsaes_encrypt8 to use the opportunity - @ to flip byte order in 32-bit counter - - vldmia sp, {q9} @ load round0 key -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x10 @ pass next round key -#else - add r4, r3, #264 -#endif - vldmia r8, {q8} @ .LREVM0SR - mov r5, r10 @ pass rounds - vstmia r9, {q10} @ save next counter - sub r6, r8, #.LREVM0SR-.LSR @ pass constants - - bl _bsaes_encrypt8_alt - - subs r2, r2, #8 - blo .Lctr_enc_loop_done - - vld1.8 {q8-q9}, [r0]! @ load input - vld1.8 {q10-q11}, [r0]! - veor q0, q8 - veor q1, q9 - vld1.8 {q12-q13}, [r0]! - veor q4, q10 - veor q6, q11 - vld1.8 {q14-q15}, [r0]! - veor q3, q12 - vst1.8 {q0-q1}, [r1]! @ write output - veor q7, q13 - veor q2, q14 - vst1.8 {q4}, [r1]! - veor q5, q15 - vst1.8 {q6}, [r1]! - vmov.i32 q8, #1 @ compose 1<<96 - vst1.8 {q3}, [r1]! - veor q9, q9, q9 - vst1.8 {q7}, [r1]! - vext.8 q8, q9, q8, #4 - vst1.8 {q2}, [r1]! - vadd.u32 q9,q8,q8 @ compose 2<<96 - vst1.8 {q5}, [r1]! - vldmia r9, {q0} @ load counter - - bne .Lctr_enc_loop - b .Lctr_enc_done - -.align 4 -.Lctr_enc_loop_done: - add r2, r2, #8 - vld1.8 {q8}, [r0]! @ load input - veor q0, q8 - vst1.8 {q0}, [r1]! @ write output - cmp r2, #2 - blo .Lctr_enc_done - vld1.8 {q9}, [r0]! - veor q1, q9 - vst1.8 {q1}, [r1]! - beq .Lctr_enc_done - vld1.8 {q10}, [r0]! - veor q4, q10 - vst1.8 {q4}, [r1]! - cmp r2, #4 - blo .Lctr_enc_done - vld1.8 {q11}, [r0]! - veor q6, q11 - vst1.8 {q6}, [r1]! - beq .Lctr_enc_done - vld1.8 {q12}, [r0]! - veor q3, q12 - vst1.8 {q3}, [r1]! - cmp r2, #6 - blo .Lctr_enc_done - vld1.8 {q13}, [r0]! - veor q7, q13 - vst1.8 {q7}, [r1]! - beq .Lctr_enc_done - vld1.8 {q14}, [r0] - veor q2, q14 - vst1.8 {q2}, [r1]! - -.Lctr_enc_done: - vmov.i32 q0, #0 - vmov.i32 q1, #0 -#ifndef BSAES_ASM_EXTENDED_KEY -.Lctr_enc_bzero: @ wipe key schedule [if any] - vstmia sp!, {q0-q1} - cmp sp, r9 - bne .Lctr_enc_bzero -#else - vstmia sp, {q0-q1} -#endif - - mov sp, r9 - add sp, #0x10 @ add sp,r9,#0x10 is no good for thumb - VFP_ABI_POP - ldmia sp!, {r4-r10, pc} @ return - -.align 4 -.Lctr_enc_short: - ldr ip, [sp] @ ctr pointer is passed on stack - stmdb sp!, {r4-r8, lr} - - mov r4, r0 @ copy arguments - mov r5, r1 - mov r6, r2 - mov r7, r3 - ldr r8, [ip, #12] @ load counter LSW - vld1.8 {q1}, [ip] @ load whole counter value -#ifdef __ARMEL__ - rev r8, r8 -#endif - sub sp, sp, #0x10 - vst1.8 {q1}, [sp,:64] @ copy counter value - sub sp, sp, #0x10 - -.Lctr_enc_short_loop: - add r0, sp, #0x10 @ input counter value - mov r1, sp @ output on the stack - mov r2, r7 @ key - - bl AES_encrypt - - vld1.8 {q0}, [r4]! @ load input - vld1.8 {q1}, [sp,:64] @ load encrypted counter - add r8, r8, #1 -#ifdef __ARMEL__ - rev r0, r8 - str r0, [sp, #0x1c] @ next counter value -#else - str r8, [sp, #0x1c] @ next counter value -#endif - veor q0,q0,q1 - vst1.8 {q0}, [r5]! @ store output - subs r6, r6, #1 - bne .Lctr_enc_short_loop - - vmov.i32 q0, #0 - vmov.i32 q1, #0 - vstmia sp!, {q0-q1} - - ldmia sp!, {r4-r8, pc} -.size bsaes_ctr32_encrypt_blocks,.-bsaes_ctr32_encrypt_blocks -.globl bsaes_xts_encrypt -.type bsaes_xts_encrypt,%function -.align 4 -bsaes_xts_encrypt: - mov ip, sp - stmdb sp!, {r4-r10, lr} @ 0x20 - VFP_ABI_PUSH - mov r6, sp @ future r3 - - mov r7, r0 - mov r8, r1 - mov r9, r2 - mov r10, r3 - - sub r0, sp, #0x10 @ 0x10 - bic r0, #0xf @ align at 16 bytes - mov sp, r0 - -#ifdef XTS_CHAIN_TWEAK - ldr r0, [ip] @ pointer to input tweak -#else - @ generate initial tweak - ldr r0, [ip, #4] @ iv[] - mov r1, sp - ldr r2, [ip, #0] @ key2 - bl AES_encrypt - mov r0,sp @ pointer to initial tweak -#endif - - ldr r1, [r10, #240] @ get # of rounds - mov r3, r6 -#ifndef BSAES_ASM_EXTENDED_KEY - @ allocate the key schedule on the stack - sub r12, sp, r1, lsl#7 @ 128 bytes per inner round key - @ add r12, #96 @ size of bit-sliced key schedule - sub r12, #48 @ place for tweak[9] - - @ populate the key schedule - mov r4, r10 @ pass key - mov r5, r1 @ pass # of rounds - mov sp, r12 - add r12, #0x90 @ pass key schedule - bl _bsaes_key_convert - veor q7, q7, q15 @ fix up last round key - vstmia r12, {q7} @ save last round key -#else - ldr r12, [r10, #244] - eors r12, #1 - beq 0f - - str r12, [r10, #244] - mov r4, r10 @ pass key - mov r5, r1 @ pass # of rounds - add r12, r10, #248 @ pass key schedule - bl _bsaes_key_convert - veor q7, q7, q15 @ fix up last round key - vstmia r12, {q7} - -.align 2 -0: sub sp, #0x90 @ place for tweak[9] -#endif - - vld1.8 {q8}, [r0] @ initial tweak - adr r2, .Lxts_magic - - subs r9, #0x80 - blo .Lxts_enc_short - b .Lxts_enc_loop - -.align 4 -.Lxts_enc_loop: - vldmia r2, {q5} @ load XTS magic - vshr.s64 q6, q8, #63 - mov r0, sp - vand q6, q6, q5 - vadd.u64 q9, q8, q8 - vst1.64 {q8}, [r0,:128]! - vswp d13,d12 - vshr.s64 q7, q9, #63 - veor q9, q9, q6 - vand q7, q7, q5 - vadd.u64 q10, q9, q9 - vst1.64 {q9}, [r0,:128]! - vswp d15,d14 - vshr.s64 q6, q10, #63 - veor q10, q10, q7 - vand q6, q6, q5 - vld1.8 {q0}, [r7]! - vadd.u64 q11, q10, q10 - vst1.64 {q10}, [r0,:128]! - vswp d13,d12 - vshr.s64 q7, q11, #63 - veor q11, q11, q6 - vand q7, q7, q5 - vld1.8 {q1}, [r7]! - veor q0, q0, q8 - vadd.u64 q12, q11, q11 - vst1.64 {q11}, [r0,:128]! - vswp d15,d14 - vshr.s64 q6, q12, #63 - veor q12, q12, q7 - vand q6, q6, q5 - vld1.8 {q2}, [r7]! - veor q1, q1, q9 - vadd.u64 q13, q12, q12 - vst1.64 {q12}, [r0,:128]! - vswp d13,d12 - vshr.s64 q7, q13, #63 - veor q13, q13, q6 - vand q7, q7, q5 - vld1.8 {q3}, [r7]! - veor q2, q2, q10 - vadd.u64 q14, q13, q13 - vst1.64 {q13}, [r0,:128]! - vswp d15,d14 - vshr.s64 q6, q14, #63 - veor q14, q14, q7 - vand q6, q6, q5 - vld1.8 {q4}, [r7]! - veor q3, q3, q11 - vadd.u64 q15, q14, q14 - vst1.64 {q14}, [r0,:128]! - vswp d13,d12 - vshr.s64 q7, q15, #63 - veor q15, q15, q6 - vand q7, q7, q5 - vld1.8 {q5}, [r7]! - veor q4, q4, q12 - vadd.u64 q8, q15, q15 - vst1.64 {q15}, [r0,:128]! - vswp d15,d14 - veor q8, q8, q7 - vst1.64 {q8}, [r0,:128] @ next round tweak - - vld1.8 {q6-q7}, [r7]! - veor q5, q5, q13 -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, r10, #248 @ pass key schedule -#endif - veor q6, q6, q14 - mov r5, r1 @ pass rounds - veor q7, q7, q15 - mov r0, sp - - bl _bsaes_encrypt8 - - vld1.64 {q8-q9}, [r0,:128]! - vld1.64 {q10-q11}, [r0,:128]! - veor q0, q0, q8 - vld1.64 {q12-q13}, [r0,:128]! - veor q1, q1, q9 - veor q8, q4, q10 - vst1.8 {q0-q1}, [r8]! - veor q9, q6, q11 - vld1.64 {q14-q15}, [r0,:128]! - veor q10, q3, q12 - vst1.8 {q8-q9}, [r8]! - veor q11, q7, q13 - veor q12, q2, q14 - vst1.8 {q10-q11}, [r8]! - veor q13, q5, q15 - vst1.8 {q12-q13}, [r8]! - - vld1.64 {q8}, [r0,:128] @ next round tweak - - subs r9, #0x80 - bpl .Lxts_enc_loop - -.Lxts_enc_short: - adds r9, #0x70 - bmi .Lxts_enc_done - - vldmia r2, {q5} @ load XTS magic - vshr.s64 q7, q8, #63 - mov r0, sp - vand q7, q7, q5 - vadd.u64 q9, q8, q8 - vst1.64 {q8}, [r0,:128]! - vswp d15,d14 - vshr.s64 q6, q9, #63 - veor q9, q9, q7 - vand q6, q6, q5 - vadd.u64 q10, q9, q9 - vst1.64 {q9}, [r0,:128]! - vswp d13,d12 - vshr.s64 q7, q10, #63 - veor q10, q10, q6 - vand q7, q7, q5 - vld1.8 {q0}, [r7]! - subs r9, #0x10 - bmi .Lxts_enc_1 - vadd.u64 q11, q10, q10 - vst1.64 {q10}, [r0,:128]! - vswp d15,d14 - vshr.s64 q6, q11, #63 - veor q11, q11, q7 - vand q6, q6, q5 - vld1.8 {q1}, [r7]! - subs r9, #0x10 - bmi .Lxts_enc_2 - veor q0, q0, q8 - vadd.u64 q12, q11, q11 - vst1.64 {q11}, [r0,:128]! - vswp d13,d12 - vshr.s64 q7, q12, #63 - veor q12, q12, q6 - vand q7, q7, q5 - vld1.8 {q2}, [r7]! - subs r9, #0x10 - bmi .Lxts_enc_3 - veor q1, q1, q9 - vadd.u64 q13, q12, q12 - vst1.64 {q12}, [r0,:128]! - vswp d15,d14 - vshr.s64 q6, q13, #63 - veor q13, q13, q7 - vand q6, q6, q5 - vld1.8 {q3}, [r7]! - subs r9, #0x10 - bmi .Lxts_enc_4 - veor q2, q2, q10 - vadd.u64 q14, q13, q13 - vst1.64 {q13}, [r0,:128]! - vswp d13,d12 - vshr.s64 q7, q14, #63 - veor q14, q14, q6 - vand q7, q7, q5 - vld1.8 {q4}, [r7]! - subs r9, #0x10 - bmi .Lxts_enc_5 - veor q3, q3, q11 - vadd.u64 q15, q14, q14 - vst1.64 {q14}, [r0,:128]! - vswp d15,d14 - vshr.s64 q6, q15, #63 - veor q15, q15, q7 - vand q6, q6, q5 - vld1.8 {q5}, [r7]! - subs r9, #0x10 - bmi .Lxts_enc_6 - veor q4, q4, q12 - sub r9, #0x10 - vst1.64 {q15}, [r0,:128] @ next round tweak - - vld1.8 {q6}, [r7]! - veor q5, q5, q13 -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, r10, #248 @ pass key schedule -#endif - veor q6, q6, q14 - mov r5, r1 @ pass rounds - mov r0, sp - - bl _bsaes_encrypt8 - - vld1.64 {q8-q9}, [r0,:128]! - vld1.64 {q10-q11}, [r0,:128]! - veor q0, q0, q8 - vld1.64 {q12-q13}, [r0,:128]! - veor q1, q1, q9 - veor q8, q4, q10 - vst1.8 {q0-q1}, [r8]! - veor q9, q6, q11 - vld1.64 {q14}, [r0,:128]! - veor q10, q3, q12 - vst1.8 {q8-q9}, [r8]! - veor q11, q7, q13 - veor q12, q2, q14 - vst1.8 {q10-q11}, [r8]! - vst1.8 {q12}, [r8]! - - vld1.64 {q8}, [r0,:128] @ next round tweak - b .Lxts_enc_done -.align 4 -.Lxts_enc_6: - vst1.64 {q14}, [r0,:128] @ next round tweak - - veor q4, q4, q12 -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, r10, #248 @ pass key schedule -#endif - veor q5, q5, q13 - mov r5, r1 @ pass rounds - mov r0, sp - - bl _bsaes_encrypt8 - - vld1.64 {q8-q9}, [r0,:128]! - vld1.64 {q10-q11}, [r0,:128]! - veor q0, q0, q8 - vld1.64 {q12-q13}, [r0,:128]! - veor q1, q1, q9 - veor q8, q4, q10 - vst1.8 {q0-q1}, [r8]! - veor q9, q6, q11 - veor q10, q3, q12 - vst1.8 {q8-q9}, [r8]! - veor q11, q7, q13 - vst1.8 {q10-q11}, [r8]! - - vld1.64 {q8}, [r0,:128] @ next round tweak - b .Lxts_enc_done - -@ put this in range for both ARM and Thumb mode adr instructions -.align 5 -.Lxts_magic: - .quad 1, 0x87 - -.align 5 -.Lxts_enc_5: - vst1.64 {q13}, [r0,:128] @ next round tweak - - veor q3, q3, q11 -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, r10, #248 @ pass key schedule -#endif - veor q4, q4, q12 - mov r5, r1 @ pass rounds - mov r0, sp - - bl _bsaes_encrypt8 - - vld1.64 {q8-q9}, [r0,:128]! - vld1.64 {q10-q11}, [r0,:128]! - veor q0, q0, q8 - vld1.64 {q12}, [r0,:128]! - veor q1, q1, q9 - veor q8, q4, q10 - vst1.8 {q0-q1}, [r8]! - veor q9, q6, q11 - veor q10, q3, q12 - vst1.8 {q8-q9}, [r8]! - vst1.8 {q10}, [r8]! - - vld1.64 {q8}, [r0,:128] @ next round tweak - b .Lxts_enc_done -.align 4 -.Lxts_enc_4: - vst1.64 {q12}, [r0,:128] @ next round tweak - - veor q2, q2, q10 -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, r10, #248 @ pass key schedule -#endif - veor q3, q3, q11 - mov r5, r1 @ pass rounds - mov r0, sp - - bl _bsaes_encrypt8 - - vld1.64 {q8-q9}, [r0,:128]! - vld1.64 {q10-q11}, [r0,:128]! - veor q0, q0, q8 - veor q1, q1, q9 - veor q8, q4, q10 - vst1.8 {q0-q1}, [r8]! - veor q9, q6, q11 - vst1.8 {q8-q9}, [r8]! - - vld1.64 {q8}, [r0,:128] @ next round tweak - b .Lxts_enc_done -.align 4 -.Lxts_enc_3: - vst1.64 {q11}, [r0,:128] @ next round tweak - - veor q1, q1, q9 -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, r10, #248 @ pass key schedule -#endif - veor q2, q2, q10 - mov r5, r1 @ pass rounds - mov r0, sp - - bl _bsaes_encrypt8 - - vld1.64 {q8-q9}, [r0,:128]! - vld1.64 {q10}, [r0,:128]! - veor q0, q0, q8 - veor q1, q1, q9 - veor q8, q4, q10 - vst1.8 {q0-q1}, [r8]! - vst1.8 {q8}, [r8]! - - vld1.64 {q8}, [r0,:128] @ next round tweak - b .Lxts_enc_done -.align 4 -.Lxts_enc_2: - vst1.64 {q10}, [r0,:128] @ next round tweak - - veor q0, q0, q8 -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, r10, #248 @ pass key schedule -#endif - veor q1, q1, q9 - mov r5, r1 @ pass rounds - mov r0, sp - - bl _bsaes_encrypt8 - - vld1.64 {q8-q9}, [r0,:128]! - veor q0, q0, q8 - veor q1, q1, q9 - vst1.8 {q0-q1}, [r8]! - - vld1.64 {q8}, [r0,:128] @ next round tweak - b .Lxts_enc_done -.align 4 -.Lxts_enc_1: - mov r0, sp - veor q0, q8 - mov r1, sp - vst1.8 {q0}, [sp,:128] - mov r2, r10 - mov r4, r3 @ preserve fp - - bl AES_encrypt - - vld1.8 {q0}, [sp,:128] - veor q0, q0, q8 - vst1.8 {q0}, [r8]! - mov r3, r4 - - vmov q8, q9 @ next round tweak - -.Lxts_enc_done: -#ifndef XTS_CHAIN_TWEAK - adds r9, #0x10 - beq .Lxts_enc_ret - sub r6, r8, #0x10 - -.Lxts_enc_steal: - ldrb r0, [r7], #1 - ldrb r1, [r8, #-0x10] - strb r0, [r8, #-0x10] - strb r1, [r8], #1 - - subs r9, #1 - bhi .Lxts_enc_steal - - vld1.8 {q0}, [r6] - mov r0, sp - veor q0, q0, q8 - mov r1, sp - vst1.8 {q0}, [sp,:128] - mov r2, r10 - mov r4, r3 @ preserve fp - - bl AES_encrypt - - vld1.8 {q0}, [sp,:128] - veor q0, q0, q8 - vst1.8 {q0}, [r6] - mov r3, r4 -#endif - -.Lxts_enc_ret: - bic r0, r3, #0xf - vmov.i32 q0, #0 - vmov.i32 q1, #0 -#ifdef XTS_CHAIN_TWEAK - ldr r1, [r3, #0x20+VFP_ABI_FRAME] @ chain tweak -#endif -.Lxts_enc_bzero: @ wipe key schedule [if any] - vstmia sp!, {q0-q1} - cmp sp, r0 - bne .Lxts_enc_bzero - - mov sp, r3 -#ifdef XTS_CHAIN_TWEAK - vst1.8 {q8}, [r1] -#endif - VFP_ABI_POP - ldmia sp!, {r4-r10, pc} @ return - -.size bsaes_xts_encrypt,.-bsaes_xts_encrypt - -.globl bsaes_xts_decrypt -.type bsaes_xts_decrypt,%function -.align 4 -bsaes_xts_decrypt: - mov ip, sp - stmdb sp!, {r4-r10, lr} @ 0x20 - VFP_ABI_PUSH - mov r6, sp @ future r3 - - mov r7, r0 - mov r8, r1 - mov r9, r2 - mov r10, r3 - - sub r0, sp, #0x10 @ 0x10 - bic r0, #0xf @ align at 16 bytes - mov sp, r0 - -#ifdef XTS_CHAIN_TWEAK - ldr r0, [ip] @ pointer to input tweak -#else - @ generate initial tweak - ldr r0, [ip, #4] @ iv[] - mov r1, sp - ldr r2, [ip, #0] @ key2 - bl AES_encrypt - mov r0, sp @ pointer to initial tweak -#endif - - ldr r1, [r10, #240] @ get # of rounds - mov r3, r6 -#ifndef BSAES_ASM_EXTENDED_KEY - @ allocate the key schedule on the stack - sub r12, sp, r1, lsl#7 @ 128 bytes per inner round key - @ add r12, #96 @ size of bit-sliced key schedule - sub r12, #48 @ place for tweak[9] - - @ populate the key schedule - mov r4, r10 @ pass key - mov r5, r1 @ pass # of rounds - mov sp, r12 - add r12, #0x90 @ pass key schedule - bl _bsaes_key_convert - add r4, sp, #0x90 - vldmia r4, {q6} - vstmia r12, {q15} @ save last round key - veor q7, q7, q6 @ fix up round 0 key - vstmia r4, {q7} -#else - ldr r12, [r10, #244] - eors r12, #1 - beq 0f - - str r12, [r10, #244] - mov r4, r10 @ pass key - mov r5, r1 @ pass # of rounds - add r12, r10, #248 @ pass key schedule - bl _bsaes_key_convert - add r4, r10, #248 - vldmia r4, {q6} - vstmia r12, {q15} @ save last round key - veor q7, q7, q6 @ fix up round 0 key - vstmia r4, {q7} - -.align 2 -0: sub sp, #0x90 @ place for tweak[9] -#endif - vld1.8 {q8}, [r0] @ initial tweak - adr r2, .Lxts_magic - -#ifndef XTS_CHAIN_TWEAK - tst r9, #0xf @ if not multiple of 16 - it ne @ Thumb2 thing, sanity check in ARM - subne r9, #0x10 @ subtract another 16 bytes -#endif - subs r9, #0x80 - - blo .Lxts_dec_short - b .Lxts_dec_loop - -.align 4 -.Lxts_dec_loop: - vldmia r2, {q5} @ load XTS magic - vshr.s64 q6, q8, #63 - mov r0, sp - vand q6, q6, q5 - vadd.u64 q9, q8, q8 - vst1.64 {q8}, [r0,:128]! - vswp d13,d12 - vshr.s64 q7, q9, #63 - veor q9, q9, q6 - vand q7, q7, q5 - vadd.u64 q10, q9, q9 - vst1.64 {q9}, [r0,:128]! - vswp d15,d14 - vshr.s64 q6, q10, #63 - veor q10, q10, q7 - vand q6, q6, q5 - vld1.8 {q0}, [r7]! - vadd.u64 q11, q10, q10 - vst1.64 {q10}, [r0,:128]! - vswp d13,d12 - vshr.s64 q7, q11, #63 - veor q11, q11, q6 - vand q7, q7, q5 - vld1.8 {q1}, [r7]! - veor q0, q0, q8 - vadd.u64 q12, q11, q11 - vst1.64 {q11}, [r0,:128]! - vswp d15,d14 - vshr.s64 q6, q12, #63 - veor q12, q12, q7 - vand q6, q6, q5 - vld1.8 {q2}, [r7]! - veor q1, q1, q9 - vadd.u64 q13, q12, q12 - vst1.64 {q12}, [r0,:128]! - vswp d13,d12 - vshr.s64 q7, q13, #63 - veor q13, q13, q6 - vand q7, q7, q5 - vld1.8 {q3}, [r7]! - veor q2, q2, q10 - vadd.u64 q14, q13, q13 - vst1.64 {q13}, [r0,:128]! - vswp d15,d14 - vshr.s64 q6, q14, #63 - veor q14, q14, q7 - vand q6, q6, q5 - vld1.8 {q4}, [r7]! - veor q3, q3, q11 - vadd.u64 q15, q14, q14 - vst1.64 {q14}, [r0,:128]! - vswp d13,d12 - vshr.s64 q7, q15, #63 - veor q15, q15, q6 - vand q7, q7, q5 - vld1.8 {q5}, [r7]! - veor q4, q4, q12 - vadd.u64 q8, q15, q15 - vst1.64 {q15}, [r0,:128]! - vswp d15,d14 - veor q8, q8, q7 - vst1.64 {q8}, [r0,:128] @ next round tweak - - vld1.8 {q6-q7}, [r7]! - veor q5, q5, q13 -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, r10, #248 @ pass key schedule -#endif - veor q6, q6, q14 - mov r5, r1 @ pass rounds - veor q7, q7, q15 - mov r0, sp - - bl _bsaes_decrypt8 - - vld1.64 {q8-q9}, [r0,:128]! - vld1.64 {q10-q11}, [r0,:128]! - veor q0, q0, q8 - vld1.64 {q12-q13}, [r0,:128]! - veor q1, q1, q9 - veor q8, q6, q10 - vst1.8 {q0-q1}, [r8]! - veor q9, q4, q11 - vld1.64 {q14-q15}, [r0,:128]! - veor q10, q2, q12 - vst1.8 {q8-q9}, [r8]! - veor q11, q7, q13 - veor q12, q3, q14 - vst1.8 {q10-q11}, [r8]! - veor q13, q5, q15 - vst1.8 {q12-q13}, [r8]! - - vld1.64 {q8}, [r0,:128] @ next round tweak - - subs r9, #0x80 - bpl .Lxts_dec_loop - -.Lxts_dec_short: - adds r9, #0x70 - bmi .Lxts_dec_done - - vldmia r2, {q5} @ load XTS magic - vshr.s64 q7, q8, #63 - mov r0, sp - vand q7, q7, q5 - vadd.u64 q9, q8, q8 - vst1.64 {q8}, [r0,:128]! - vswp d15,d14 - vshr.s64 q6, q9, #63 - veor q9, q9, q7 - vand q6, q6, q5 - vadd.u64 q10, q9, q9 - vst1.64 {q9}, [r0,:128]! - vswp d13,d12 - vshr.s64 q7, q10, #63 - veor q10, q10, q6 - vand q7, q7, q5 - vld1.8 {q0}, [r7]! - subs r9, #0x10 - bmi .Lxts_dec_1 - vadd.u64 q11, q10, q10 - vst1.64 {q10}, [r0,:128]! - vswp d15,d14 - vshr.s64 q6, q11, #63 - veor q11, q11, q7 - vand q6, q6, q5 - vld1.8 {q1}, [r7]! - subs r9, #0x10 - bmi .Lxts_dec_2 - veor q0, q0, q8 - vadd.u64 q12, q11, q11 - vst1.64 {q11}, [r0,:128]! - vswp d13,d12 - vshr.s64 q7, q12, #63 - veor q12, q12, q6 - vand q7, q7, q5 - vld1.8 {q2}, [r7]! - subs r9, #0x10 - bmi .Lxts_dec_3 - veor q1, q1, q9 - vadd.u64 q13, q12, q12 - vst1.64 {q12}, [r0,:128]! - vswp d15,d14 - vshr.s64 q6, q13, #63 - veor q13, q13, q7 - vand q6, q6, q5 - vld1.8 {q3}, [r7]! - subs r9, #0x10 - bmi .Lxts_dec_4 - veor q2, q2, q10 - vadd.u64 q14, q13, q13 - vst1.64 {q13}, [r0,:128]! - vswp d13,d12 - vshr.s64 q7, q14, #63 - veor q14, q14, q6 - vand q7, q7, q5 - vld1.8 {q4}, [r7]! - subs r9, #0x10 - bmi .Lxts_dec_5 - veor q3, q3, q11 - vadd.u64 q15, q14, q14 - vst1.64 {q14}, [r0,:128]! - vswp d15,d14 - vshr.s64 q6, q15, #63 - veor q15, q15, q7 - vand q6, q6, q5 - vld1.8 {q5}, [r7]! - subs r9, #0x10 - bmi .Lxts_dec_6 - veor q4, q4, q12 - sub r9, #0x10 - vst1.64 {q15}, [r0,:128] @ next round tweak - - vld1.8 {q6}, [r7]! - veor q5, q5, q13 -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, r10, #248 @ pass key schedule -#endif - veor q6, q6, q14 - mov r5, r1 @ pass rounds - mov r0, sp - - bl _bsaes_decrypt8 - - vld1.64 {q8-q9}, [r0,:128]! - vld1.64 {q10-q11}, [r0,:128]! - veor q0, q0, q8 - vld1.64 {q12-q13}, [r0,:128]! - veor q1, q1, q9 - veor q8, q6, q10 - vst1.8 {q0-q1}, [r8]! - veor q9, q4, q11 - vld1.64 {q14}, [r0,:128]! - veor q10, q2, q12 - vst1.8 {q8-q9}, [r8]! - veor q11, q7, q13 - veor q12, q3, q14 - vst1.8 {q10-q11}, [r8]! - vst1.8 {q12}, [r8]! - - vld1.64 {q8}, [r0,:128] @ next round tweak - b .Lxts_dec_done -.align 4 -.Lxts_dec_6: - vst1.64 {q14}, [r0,:128] @ next round tweak - - veor q4, q4, q12 -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, r10, #248 @ pass key schedule -#endif - veor q5, q5, q13 - mov r5, r1 @ pass rounds - mov r0, sp - - bl _bsaes_decrypt8 - - vld1.64 {q8-q9}, [r0,:128]! - vld1.64 {q10-q11}, [r0,:128]! - veor q0, q0, q8 - vld1.64 {q12-q13}, [r0,:128]! - veor q1, q1, q9 - veor q8, q6, q10 - vst1.8 {q0-q1}, [r8]! - veor q9, q4, q11 - veor q10, q2, q12 - vst1.8 {q8-q9}, [r8]! - veor q11, q7, q13 - vst1.8 {q10-q11}, [r8]! - - vld1.64 {q8}, [r0,:128] @ next round tweak - b .Lxts_dec_done -.align 4 -.Lxts_dec_5: - vst1.64 {q13}, [r0,:128] @ next round tweak - - veor q3, q3, q11 -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, r10, #248 @ pass key schedule -#endif - veor q4, q4, q12 - mov r5, r1 @ pass rounds - mov r0, sp - - bl _bsaes_decrypt8 - - vld1.64 {q8-q9}, [r0,:128]! - vld1.64 {q10-q11}, [r0,:128]! - veor q0, q0, q8 - vld1.64 {q12}, [r0,:128]! - veor q1, q1, q9 - veor q8, q6, q10 - vst1.8 {q0-q1}, [r8]! - veor q9, q4, q11 - veor q10, q2, q12 - vst1.8 {q8-q9}, [r8]! - vst1.8 {q10}, [r8]! - - vld1.64 {q8}, [r0,:128] @ next round tweak - b .Lxts_dec_done -.align 4 -.Lxts_dec_4: - vst1.64 {q12}, [r0,:128] @ next round tweak - - veor q2, q2, q10 -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, r10, #248 @ pass key schedule -#endif - veor q3, q3, q11 - mov r5, r1 @ pass rounds - mov r0, sp - - bl _bsaes_decrypt8 - - vld1.64 {q8-q9}, [r0,:128]! - vld1.64 {q10-q11}, [r0,:128]! - veor q0, q0, q8 - veor q1, q1, q9 - veor q8, q6, q10 - vst1.8 {q0-q1}, [r8]! - veor q9, q4, q11 - vst1.8 {q8-q9}, [r8]! - - vld1.64 {q8}, [r0,:128] @ next round tweak - b .Lxts_dec_done -.align 4 -.Lxts_dec_3: - vst1.64 {q11}, [r0,:128] @ next round tweak - - veor q1, q1, q9 -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, r10, #248 @ pass key schedule -#endif - veor q2, q2, q10 - mov r5, r1 @ pass rounds - mov r0, sp - - bl _bsaes_decrypt8 - - vld1.64 {q8-q9}, [r0,:128]! - vld1.64 {q10}, [r0,:128]! - veor q0, q0, q8 - veor q1, q1, q9 - veor q8, q6, q10 - vst1.8 {q0-q1}, [r8]! - vst1.8 {q8}, [r8]! - - vld1.64 {q8}, [r0,:128] @ next round tweak - b .Lxts_dec_done -.align 4 -.Lxts_dec_2: - vst1.64 {q10}, [r0,:128] @ next round tweak - - veor q0, q0, q8 -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, r10, #248 @ pass key schedule -#endif - veor q1, q1, q9 - mov r5, r1 @ pass rounds - mov r0, sp - - bl _bsaes_decrypt8 - - vld1.64 {q8-q9}, [r0,:128]! - veor q0, q0, q8 - veor q1, q1, q9 - vst1.8 {q0-q1}, [r8]! - - vld1.64 {q8}, [r0,:128] @ next round tweak - b .Lxts_dec_done -.align 4 -.Lxts_dec_1: - mov r0, sp - veor q0, q8 - mov r1, sp - vst1.8 {q0}, [sp,:128] - mov r2, r10 - mov r4, r3 @ preserve fp - mov r5, r2 @ preserve magic - - bl AES_decrypt - - vld1.8 {q0}, [sp,:128] - veor q0, q0, q8 - vst1.8 {q0}, [r8]! - mov r3, r4 - mov r2, r5 - - vmov q8, q9 @ next round tweak - -.Lxts_dec_done: -#ifndef XTS_CHAIN_TWEAK - adds r9, #0x10 - beq .Lxts_dec_ret - - @ calculate one round of extra tweak for the stolen ciphertext - vldmia r2, {q5} - vshr.s64 q6, q8, #63 - vand q6, q6, q5 - vadd.u64 q9, q8, q8 - vswp d13,d12 - veor q9, q9, q6 - - @ perform the final decryption with the last tweak value - vld1.8 {q0}, [r7]! - mov r0, sp - veor q0, q0, q9 - mov r1, sp - vst1.8 {q0}, [sp,:128] - mov r2, r10 - mov r4, r3 @ preserve fp - - bl AES_decrypt - - vld1.8 {q0}, [sp,:128] - veor q0, q0, q9 - vst1.8 {q0}, [r8] - - mov r6, r8 -.Lxts_dec_steal: - ldrb r1, [r8] - ldrb r0, [r7], #1 - strb r1, [r8, #0x10] - strb r0, [r8], #1 - - subs r9, #1 - bhi .Lxts_dec_steal - - vld1.8 {q0}, [r6] - mov r0, sp - veor q0, q8 - mov r1, sp - vst1.8 {q0}, [sp,:128] - mov r2, r10 - - bl AES_decrypt - - vld1.8 {q0}, [sp,:128] - veor q0, q0, q8 - vst1.8 {q0}, [r6] - mov r3, r4 -#endif - -.Lxts_dec_ret: - bic r0, r3, #0xf - vmov.i32 q0, #0 - vmov.i32 q1, #0 -#ifdef XTS_CHAIN_TWEAK - ldr r1, [r3, #0x20+VFP_ABI_FRAME] @ chain tweak -#endif -.Lxts_dec_bzero: @ wipe key schedule [if any] - vstmia sp!, {q0-q1} - cmp sp, r0 - bne .Lxts_dec_bzero - - mov sp, r3 -#ifdef XTS_CHAIN_TWEAK - vst1.8 {q8}, [r1] -#endif - VFP_ABI_POP - ldmia sp!, {r4-r10, pc} @ return - -.size bsaes_xts_decrypt,.-bsaes_xts_decrypt -#endif diff --git a/arch/arm/crypto/aesbs-glue.c b/arch/arm/crypto/aesbs-glue.c deleted file mode 100644 index d8e06de72ef3..000000000000 --- a/arch/arm/crypto/aesbs-glue.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - * linux/arch/arm/crypto/aesbs-glue.c - glue code for NEON bit sliced AES - * - * Copyright (C) 2013 Linaro Ltd <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <asm/neon.h> -#include <crypto/aes.h> -#include <crypto/cbc.h> -#include <crypto/internal/simd.h> -#include <crypto/internal/skcipher.h> -#include <linux/module.h> -#include <crypto/xts.h> - -#include "aes_glue.h" - -#define BIT_SLICED_KEY_MAXSIZE (128 * (AES_MAXNR - 1) + 2 * AES_BLOCK_SIZE) - -struct BS_KEY { - struct AES_KEY rk; - int converted; - u8 __aligned(8) bs[BIT_SLICED_KEY_MAXSIZE]; -} __aligned(8); - -asmlinkage void bsaes_enc_key_convert(u8 out[], struct AES_KEY const *in); -asmlinkage void bsaes_dec_key_convert(u8 out[], struct AES_KEY const *in); - -asmlinkage void bsaes_cbc_encrypt(u8 const in[], u8 out[], u32 bytes, - struct BS_KEY *key, u8 iv[]); - -asmlinkage void bsaes_ctr32_encrypt_blocks(u8 const in[], u8 out[], u32 blocks, - struct BS_KEY *key, u8 const iv[]); - -asmlinkage void bsaes_xts_encrypt(u8 const in[], u8 out[], u32 bytes, - struct BS_KEY *key, u8 tweak[]); - -asmlinkage void bsaes_xts_decrypt(u8 const in[], u8 out[], u32 bytes, - struct BS_KEY *key, u8 tweak[]); - -struct aesbs_cbc_ctx { - struct AES_KEY enc; - struct BS_KEY dec; -}; - -struct aesbs_ctr_ctx { - struct BS_KEY enc; -}; - -struct aesbs_xts_ctx { - struct BS_KEY enc; - struct BS_KEY dec; - struct AES_KEY twkey; -}; - -static int aesbs_cbc_set_key(struct crypto_skcipher *tfm, const u8 *in_key, - unsigned int key_len) -{ - struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); - int bits = key_len * 8; - - if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc)) { - crypto_skcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); - return -EINVAL; - } - ctx->dec.rk = ctx->enc; - private_AES_set_decrypt_key(in_key, bits, &ctx->dec.rk); - ctx->dec.converted = 0; - return 0; -} - -static int aesbs_ctr_set_key(struct crypto_skcipher *tfm, const u8 *in_key, - unsigned int key_len) -{ - struct aesbs_ctr_ctx *ctx = crypto_skcipher_ctx(tfm); - int bits = key_len * 8; - - if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc.rk)) { - crypto_skcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); - return -EINVAL; - } - ctx->enc.converted = 0; - return 0; -} - -static int aesbs_xts_set_key(struct crypto_skcipher *tfm, const u8 *in_key, - unsigned int key_len) -{ - struct aesbs_xts_ctx *ctx = crypto_skcipher_ctx(tfm); - int bits = key_len * 4; - int err; - - err = xts_verify_key(tfm, in_key, key_len); - if (err) - return err; - - if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc.rk)) { - crypto_skcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); - return -EINVAL; - } - ctx->dec.rk = ctx->enc.rk; - private_AES_set_decrypt_key(in_key, bits, &ctx->dec.rk); - private_AES_set_encrypt_key(in_key + key_len / 2, bits, &ctx->twkey); - ctx->enc.converted = ctx->dec.converted = 0; - return 0; -} - -static inline void aesbs_encrypt_one(struct crypto_skcipher *tfm, - const u8 *src, u8 *dst) -{ - struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); - - AES_encrypt(src, dst, &ctx->enc); -} - -static int aesbs_cbc_encrypt(struct skcipher_request *req) -{ - return crypto_cbc_encrypt_walk(req, aesbs_encrypt_one); -} - -static inline void aesbs_decrypt_one(struct crypto_skcipher *tfm, - const u8 *src, u8 *dst) -{ - struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); - - AES_decrypt(src, dst, &ctx->dec.rk); -} - -static int aesbs_cbc_decrypt(struct skcipher_request *req) -{ - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); - struct skcipher_walk walk; - unsigned int nbytes; - int err; - - for (err = skcipher_walk_virt(&walk, req, false); - (nbytes = walk.nbytes); err = skcipher_walk_done(&walk, nbytes)) { - u32 blocks = nbytes / AES_BLOCK_SIZE; - u8 *dst = walk.dst.virt.addr; - u8 *src = walk.src.virt.addr; - u8 *iv = walk.iv; - - if (blocks >= 8) { - kernel_neon_begin(); - bsaes_cbc_encrypt(src, dst, nbytes, &ctx->dec, iv); - kernel_neon_end(); - nbytes %= AES_BLOCK_SIZE; - continue; - } - - nbytes = crypto_cbc_decrypt_blocks(&walk, tfm, - aesbs_decrypt_one); - } - return err; -} - -static void inc_be128_ctr(__be32 ctr[], u32 addend) -{ - int i; - - for (i = 3; i >= 0; i--, addend = 1) { - u32 n = be32_to_cpu(ctr[i]) + addend; - - ctr[i] = cpu_to_be32(n); - if (n >= addend) - break; - } -} - -static int aesbs_ctr_encrypt(struct skcipher_request *req) -{ - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - struct aesbs_ctr_ctx *ctx = crypto_skcipher_ctx(tfm); - struct skcipher_walk walk; - u32 blocks; - int err; - - err = skcipher_walk_virt(&walk, req, false); - - while ((blocks = walk.nbytes / AES_BLOCK_SIZE)) { - u32 tail = walk.nbytes % AES_BLOCK_SIZE; - __be32 *ctr = (__be32 *)walk.iv; - u32 headroom = UINT_MAX - be32_to_cpu(ctr[3]); - - /* avoid 32 bit counter overflow in the NEON code */ - if (unlikely(headroom < blocks)) { - blocks = headroom + 1; - tail = walk.nbytes - blocks * AES_BLOCK_SIZE; - } - kernel_neon_begin(); - bsaes_ctr32_encrypt_blocks(walk.src.virt.addr, - walk.dst.virt.addr, blocks, - &ctx->enc, walk.iv); - kernel_neon_end(); - inc_be128_ctr(ctr, blocks); - - err = skcipher_walk_done(&walk, tail); - } - if (walk.nbytes) { - u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE; - u8 *tsrc = walk.src.virt.addr + blocks * AES_BLOCK_SIZE; - u8 ks[AES_BLOCK_SIZE]; - - AES_encrypt(walk.iv, ks, &ctx->enc.rk); - if (tdst != tsrc) - memcpy(tdst, tsrc, walk.nbytes); - crypto_xor(tdst, ks, walk.nbytes); - err = skcipher_walk_done(&walk, 0); - } - return err; -} - -static int aesbs_xts_encrypt(struct skcipher_request *req) -{ - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - struct aesbs_xts_ctx *ctx = crypto_skcipher_ctx(tfm); - struct skcipher_walk walk; - int err; - - err = skcipher_walk_virt(&walk, req, false); - - /* generate the initial tweak */ - AES_encrypt(walk.iv, walk.iv, &ctx->twkey); - - while (walk.nbytes) { - kernel_neon_begin(); - bsaes_xts_encrypt(walk.src.virt.addr, walk.dst.virt.addr, - walk.nbytes, &ctx->enc, walk.iv); - kernel_neon_end(); - err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); - } - return err; -} - -static int aesbs_xts_decrypt(struct skcipher_request *req) -{ - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - struct aesbs_xts_ctx *ctx = crypto_skcipher_ctx(tfm); - struct skcipher_walk walk; - int err; - - err = skcipher_walk_virt(&walk, req, false); - - /* generate the initial tweak */ - AES_encrypt(walk.iv, walk.iv, &ctx->twkey); - - while (walk.nbytes) { - kernel_neon_begin(); - bsaes_xts_decrypt(walk.src.virt.addr, walk.dst.virt.addr, - walk.nbytes, &ctx->dec, walk.iv); - kernel_neon_end(); - err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); - } - return err; -} - -static struct skcipher_alg aesbs_algs[] = { { - .base = { - .cra_name = "__cbc(aes)", - .cra_driver_name = "__cbc-aes-neonbs", - .cra_priority = 300, - .cra_flags = CRYPTO_ALG_INTERNAL, - .cra_blocksize = AES_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct aesbs_cbc_ctx), - .cra_alignmask = 7, - .cra_module = THIS_MODULE, - }, - .min_keysize = AES_MIN_KEY_SIZE, - .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, - .setkey = aesbs_cbc_set_key, - .encrypt = aesbs_cbc_encrypt, - .decrypt = aesbs_cbc_decrypt, -}, { - .base = { - .cra_name = "__ctr(aes)", - .cra_driver_name = "__ctr-aes-neonbs", - .cra_priority = 300, - .cra_flags = CRYPTO_ALG_INTERNAL, - .cra_blocksize = 1, - .cra_ctxsize = sizeof(struct aesbs_ctr_ctx), - .cra_alignmask = 7, - .cra_module = THIS_MODULE, - }, - .min_keysize = AES_MIN_KEY_SIZE, - .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, - .chunksize = AES_BLOCK_SIZE, - .setkey = aesbs_ctr_set_key, - .encrypt = aesbs_ctr_encrypt, - .decrypt = aesbs_ctr_encrypt, -}, { - .base = { - .cra_name = "__xts(aes)", - .cra_driver_name = "__xts-aes-neonbs", - .cra_priority = 300, - .cra_flags = CRYPTO_ALG_INTERNAL, - .cra_blocksize = AES_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct aesbs_xts_ctx), - .cra_alignmask = 7, - .cra_module = THIS_MODULE, - }, - .min_keysize = 2 * AES_MIN_KEY_SIZE, - .max_keysize = 2 * AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, - .setkey = aesbs_xts_set_key, - .encrypt = aesbs_xts_encrypt, - .decrypt = aesbs_xts_decrypt, -} }; - -struct simd_skcipher_alg *aesbs_simd_algs[ARRAY_SIZE(aesbs_algs)]; - -static void aesbs_mod_exit(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(aesbs_simd_algs) && aesbs_simd_algs[i]; i++) - simd_skcipher_free(aesbs_simd_algs[i]); - - crypto_unregister_skciphers(aesbs_algs, ARRAY_SIZE(aesbs_algs)); -} - -static int __init aesbs_mod_init(void) -{ - struct simd_skcipher_alg *simd; - const char *basename; - const char *algname; - const char *drvname; - int err; - int i; - - if (!cpu_has_neon()) - return -ENODEV; - - err = crypto_register_skciphers(aesbs_algs, ARRAY_SIZE(aesbs_algs)); - if (err) - return err; - - for (i = 0; i < ARRAY_SIZE(aesbs_algs); i++) { - algname = aesbs_algs[i].base.cra_name + 2; - drvname = aesbs_algs[i].base.cra_driver_name + 2; - basename = aesbs_algs[i].base.cra_driver_name; - simd = simd_skcipher_create_compat(algname, drvname, basename); - err = PTR_ERR(simd); - if (IS_ERR(simd)) - goto unregister_simds; - - aesbs_simd_algs[i] = simd; - } - - return 0; - -unregister_simds: - aesbs_mod_exit(); - return err; -} - -module_init(aesbs_mod_init); -module_exit(aesbs_mod_exit); - -MODULE_DESCRIPTION("Bit sliced AES in CBC/CTR/XTS modes using NEON"); -MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/crypto/bsaes-armv7.pl b/arch/arm/crypto/bsaes-armv7.pl deleted file mode 100644 index a4d3856e7d24..000000000000 --- a/arch/arm/crypto/bsaes-armv7.pl +++ /dev/null @@ -1,2471 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# -# Specific modes and adaptation for Linux kernel by Ard Biesheuvel -# <ard.biesheuvel@linaro.org>. Permission to use under GPL terms is -# granted. -# ==================================================================== - -# Bit-sliced AES for ARM NEON -# -# February 2012. -# -# This implementation is direct adaptation of bsaes-x86_64 module for -# ARM NEON. Except that this module is endian-neutral [in sense that -# it can be compiled for either endianness] by courtesy of vld1.8's -# neutrality. Initial version doesn't implement interface to OpenSSL, -# only low-level primitives and unsupported entry points, just enough -# to collect performance results, which for Cortex-A8 core are: -# -# encrypt 19.5 cycles per byte processed with 128-bit key -# decrypt 22.1 cycles per byte processed with 128-bit key -# key conv. 440 cycles per 128-bit key/0.18 of 8x block -# -# Snapdragon S4 encrypts byte in 17.6 cycles and decrypts in 19.7, -# which is [much] worse than anticipated (for further details see -# http://www.openssl.org/~appro/Snapdragon-S4.html). -# -# Cortex-A15 manages in 14.2/16.1 cycles [when integer-only code -# manages in 20.0 cycles]. -# -# When comparing to x86_64 results keep in mind that NEON unit is -# [mostly] single-issue and thus can't [fully] benefit from -# instruction-level parallelism. And when comparing to aes-armv4 -# results keep in mind key schedule conversion overhead (see -# bsaes-x86_64.pl for further details)... -# -# <appro@openssl.org> - -# April-August 2013 -# -# Add CBC, CTR and XTS subroutines, adapt for kernel use. -# -# <ard.biesheuvel@linaro.org> - -while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {} -open STDOUT,">$output"; - -my ($inp,$out,$len,$key)=("r0","r1","r2","r3"); -my @XMM=map("q$_",(0..15)); - -{ -my ($key,$rounds,$const)=("r4","r5","r6"); - -sub Dlo() { shift=~m|q([1]?[0-9])|?"d".($1*2):""; } -sub Dhi() { shift=~m|q([1]?[0-9])|?"d".($1*2+1):""; } - -sub Sbox { -# input in lsb > [b0, b1, b2, b3, b4, b5, b6, b7] < msb -# output in lsb > [b0, b1, b4, b6, b3, b7, b2, b5] < msb -my @b=@_[0..7]; -my @t=@_[8..11]; -my @s=@_[12..15]; - &InBasisChange (@b); - &Inv_GF256 (@b[6,5,0,3,7,1,4,2],@t,@s); - &OutBasisChange (@b[7,1,4,2,6,5,0,3]); -} - -sub InBasisChange { -# input in lsb > [b0, b1, b2, b3, b4, b5, b6, b7] < msb -# output in lsb > [b6, b5, b0, b3, b7, b1, b4, b2] < msb -my @b=@_[0..7]; -$code.=<<___; - veor @b[2], @b[2], @b[1] - veor @b[5], @b[5], @b[6] - veor @b[3], @b[3], @b[0] - veor @b[6], @b[6], @b[2] - veor @b[5], @b[5], @b[0] - - veor @b[6], @b[6], @b[3] - veor @b[3], @b[3], @b[7] - veor @b[7], @b[7], @b[5] - veor @b[3], @b[3], @b[4] - veor @b[4], @b[4], @b[5] - - veor @b[2], @b[2], @b[7] - veor @b[3], @b[3], @b[1] - veor @b[1], @b[1], @b[5] -___ -} - -sub OutBasisChange { -# input in lsb > [b0, b1, b2, b3, b4, b5, b6, b7] < msb -# output in lsb > [b6, b1, b2, b4, b7, b0, b3, b5] < msb -my @b=@_[0..7]; -$code.=<<___; - veor @b[0], @b[0], @b[6] - veor @b[1], @b[1], @b[4] - veor @b[4], @b[4], @b[6] - veor @b[2], @b[2], @b[0] - veor @b[6], @b[6], @b[1] - - veor @b[1], @b[1], @b[5] - veor @b[5], @b[5], @b[3] - veor @b[3], @b[3], @b[7] - veor @b[7], @b[7], @b[5] - veor @b[2], @b[2], @b[5] - - veor @b[4], @b[4], @b[7] -___ -} - -sub InvSbox { -# input in lsb > [b0, b1, b2, b3, b4, b5, b6, b7] < msb -# output in lsb > [b0, b1, b6, b4, b2, b7, b3, b5] < msb -my @b=@_[0..7]; -my @t=@_[8..11]; -my @s=@_[12..15]; - &InvInBasisChange (@b); - &Inv_GF256 (@b[5,1,2,6,3,7,0,4],@t,@s); - &InvOutBasisChange (@b[3,7,0,4,5,1,2,6]); -} - -sub InvInBasisChange { # OutBasisChange in reverse (with twist) -my @b=@_[5,1,2,6,3,7,0,4]; -$code.=<<___ - veor @b[1], @b[1], @b[7] - veor @b[4], @b[4], @b[7] - - veor @b[7], @b[7], @b[5] - veor @b[1], @b[1], @b[3] - veor @b[2], @b[2], @b[5] - veor @b[3], @b[3], @b[7] - - veor @b[6], @b[6], @b[1] - veor @b[2], @b[2], @b[0] - veor @b[5], @b[5], @b[3] - veor @b[4], @b[4], @b[6] - veor @b[0], @b[0], @b[6] - veor @b[1], @b[1], @b[4] -___ -} - -sub InvOutBasisChange { # InBasisChange in reverse -my @b=@_[2,5,7,3,6,1,0,4]; -$code.=<<___; - veor @b[1], @b[1], @b[5] - veor @b[2], @b[2], @b[7] - - veor @b[3], @b[3], @b[1] - veor @b[4], @b[4], @b[5] - veor @b[7], @b[7], @b[5] - veor @b[3], @b[3], @b[4] - veor @b[5], @b[5], @b[0] - veor @b[3], @b[3], @b[7] - veor @b[6], @b[6], @b[2] - veor @b[2], @b[2], @b[1] - veor @b[6], @b[6], @b[3] - - veor @b[3], @b[3], @b[0] - veor @b[5], @b[5], @b[6] -___ -} - -sub Mul_GF4 { -#;************************************************************* -#;* Mul_GF4: Input x0-x1,y0-y1 Output x0-x1 Temp t0 (8) * -#;************************************************************* -my ($x0,$x1,$y0,$y1,$t0,$t1)=@_; -$code.=<<___; - veor $t0, $y0, $y1 - vand $t0, $t0, $x0 - veor $x0, $x0, $x1 - vand $t1, $x1, $y0 - vand $x0, $x0, $y1 - veor $x1, $t1, $t0 - veor $x0, $x0, $t1 -___ -} - -sub Mul_GF4_N { # not used, see next subroutine -# multiply and scale by N -my ($x0,$x1,$y0,$y1,$t0)=@_; -$code.=<<___; - veor $t0, $y0, $y1 - vand $t0, $t0, $x0 - veor $x0, $x0, $x1 - vand $x1, $x1, $y0 - vand $x0, $x0, $y1 - veor $x1, $x1, $x0 - veor $x0, $x0, $t0 -___ -} - -sub Mul_GF4_N_GF4 { -# interleaved Mul_GF4_N and Mul_GF4 -my ($x0,$x1,$y0,$y1,$t0, - $x2,$x3,$y2,$y3,$t1)=@_; -$code.=<<___; - veor $t0, $y0, $y1 - veor $t1, $y2, $y3 - vand $t0, $t0, $x0 - vand $t1, $t1, $x2 - veor $x0, $x0, $x1 - veor $x2, $x2, $x3 - vand $x1, $x1, $y0 - vand $x3, $x3, $y2 - vand $x0, $x0, $y1 - vand $x2, $x2, $y3 - veor $x1, $x1, $x0 - veor $x2, $x2, $x3 - veor $x0, $x0, $t0 - veor $x3, $x3, $t1 -___ -} -sub Mul_GF16_2 { -my @x=@_[0..7]; -my @y=@_[8..11]; -my @t=@_[12..15]; -$code.=<<___; - veor @t[0], @x[0], @x[2] - veor @t[1], @x[1], @x[3] -___ - &Mul_GF4 (@x[0], @x[1], @y[0], @y[1], @t[2..3]); -$code.=<<___; - veor @y[0], @y[0], @y[2] - veor @y[1], @y[1], @y[3] -___ - Mul_GF4_N_GF4 (@t[0], @t[1], @y[0], @y[1], @t[3], - @x[2], @x[3], @y[2], @y[3], @t[2]); -$code.=<<___; - veor @x[0], @x[0], @t[0] - veor @x[2], @x[2], @t[0] - veor @x[1], @x[1], @t[1] - veor @x[3], @x[3], @t[1] - - veor @t[0], @x[4], @x[6] - veor @t[1], @x[5], @x[7] -___ - &Mul_GF4_N_GF4 (@t[0], @t[1], @y[0], @y[1], @t[3], - @x[6], @x[7], @y[2], @y[3], @t[2]); -$code.=<<___; - veor @y[0], @y[0], @y[2] - veor @y[1], @y[1], @y[3] -___ - &Mul_GF4 (@x[4], @x[5], @y[0], @y[1], @t[2..3]); -$code.=<<___; - veor @x[4], @x[4], @t[0] - veor @x[6], @x[6], @t[0] - veor @x[5], @x[5], @t[1] - veor @x[7], @x[7], @t[1] -___ -} -sub Inv_GF256 { -#;******************************************************************** -#;* Inv_GF256: Input x0-x7 Output x0-x7 Temp t0-t3,s0-s3 (144) * -#;******************************************************************** -my @x=@_[0..7]; -my @t=@_[8..11]; -my @s=@_[12..15]; -# direct optimizations from hardware -$code.=<<___; - veor @t[3], @x[4], @x[6] - veor @t[2], @x[5], @x[7] - veor @t[1], @x[1], @x[3] - veor @s[1], @x[7], @x[6] - vmov @t[0], @t[2] - veor @s[0], @x[0], @x[2] - - vorr @t[2], @t[2], @t[1] - veor @s[3], @t[3], @t[0] - vand @s[2], @t[3], @s[0] - vorr @t[3], @t[3], @s[0] - veor @s[0], @s[0], @t[1] - vand @t[0], @t[0], @t[1] - veor @t[1], @x[3], @x[2] - vand @s[3], @s[3], @s[0] - vand @s[1], @s[1], @t[1] - veor @t[1], @x[4], @x[5] - veor @s[0], @x[1], @x[0] - veor @t[3], @t[3], @s[1] - veor @t[2], @t[2], @s[1] - vand @s[1], @t[1], @s[0] - vorr @t[1], @t[1], @s[0] - veor @t[3], @t[3], @s[3] - veor @t[0], @t[0], @s[1] - veor @t[2], @t[2], @s[2] - veor @t[1], @t[1], @s[3] - veor @t[0], @t[0], @s[2] - vand @s[0], @x[7], @x[3] - veor @t[1], @t[1], @s[2] - vand @s[1], @x[6], @x[2] - vand @s[2], @x[5], @x[1] - vorr @s[3], @x[4], @x[0] - veor @t[3], @t[3], @s[0] - veor @t[1], @t[1], @s[2] - veor @t[0], @t[0], @s[3] - veor @t[2], @t[2], @s[1] - - @ Inv_GF16 \t0, \t1, \t2, \t3, \s0, \s1, \s2, \s3 - - @ new smaller inversion - - vand @s[2], @t[3], @t[1] - vmov @s[0], @t[0] - - veor @s[1], @t[2], @s[2] - veor @s[3], @t[0], @s[2] - veor @s[2], @t[0], @s[2] @ @s[2]=@s[3] - - vbsl @s[1], @t[1], @t[0] - vbsl @s[3], @t[3], @t[2] - veor @t[3], @t[3], @t[2] - - vbsl @s[0], @s[1], @s[2] - vbsl @t[0], @s[2], @s[1] - - vand @s[2], @s[0], @s[3] - veor @t[1], @t[1], @t[0] - - veor @s[2], @s[2], @t[3] -___ -# output in s3, s2, s1, t1 - -# Mul_GF16_2 \x0, \x1, \x2, \x3, \x4, \x5, \x6, \x7, \t2, \t3, \t0, \t1, \s0, \s1, \s2, \s3 - -# Mul_GF16_2 \x0, \x1, \x2, \x3, \x4, \x5, \x6, \x7, \s3, \s2, \s1, \t1, \s0, \t0, \t2, \t3 - &Mul_GF16_2(@x,@s[3,2,1],@t[1],@s[0],@t[0,2,3]); - -### output msb > [x3,x2,x1,x0,x7,x6,x5,x4] < lsb -} - -# AES linear components - -sub ShiftRows { -my @x=@_[0..7]; -my @t=@_[8..11]; -my $mask=pop; -$code.=<<___; - vldmia $key!, {@t[0]-@t[3]} - veor @t[0], @t[0], @x[0] - veor @t[1], @t[1], @x[1] - vtbl.8 `&Dlo(@x[0])`, {@t[0]}, `&Dlo($mask)` - vtbl.8 `&Dhi(@x[0])`, {@t[0]}, `&Dhi($mask)` - vldmia $key!, {@t[0]} - veor @t[2], @t[2], @x[2] - vtbl.8 `&Dlo(@x[1])`, {@t[1]}, `&Dlo($mask)` - vtbl.8 `&Dhi(@x[1])`, {@t[1]}, `&Dhi($mask)` - vldmia $key!, {@t[1]} - veor @t[3], @t[3], @x[3] - vtbl.8 `&Dlo(@x[2])`, {@t[2]}, `&Dlo($mask)` - vtbl.8 `&Dhi(@x[2])`, {@t[2]}, `&Dhi($mask)` - vldmia $key!, {@t[2]} - vtbl.8 `&Dlo(@x[3])`, {@t[3]}, `&Dlo($mask)` - vtbl.8 `&Dhi(@x[3])`, {@t[3]}, `&Dhi($mask)` - vldmia $key!, {@t[3]} - veor @t[0], @t[0], @x[4] - veor @t[1], @t[1], @x[5] - vtbl.8 `&Dlo(@x[4])`, {@t[0]}, `&Dlo($mask)` - vtbl.8 `&Dhi(@x[4])`, {@t[0]}, `&Dhi($mask)` - veor @t[2], @t[2], @x[6] - vtbl.8 `&Dlo(@x[5])`, {@t[1]}, `&Dlo($mask)` - vtbl.8 `&Dhi(@x[5])`, {@t[1]}, `&Dhi($mask)` - veor @t[3], @t[3], @x[7] - vtbl.8 `&Dlo(@x[6])`, {@t[2]}, `&Dlo($mask)` - vtbl.8 `&Dhi(@x[6])`, {@t[2]}, `&Dhi($mask)` - vtbl.8 `&Dlo(@x[7])`, {@t[3]}, `&Dlo($mask)` - vtbl.8 `&Dhi(@x[7])`, {@t[3]}, `&Dhi($mask)` -___ -} - -sub MixColumns { -# modified to emit output in order suitable for feeding back to aesenc[last] -my @x=@_[0..7]; -my @t=@_[8..15]; -my $inv=@_[16]; # optional -$code.=<<___; - vext.8 @t[0], @x[0], @x[0], #12 @ x0 <<< 32 - vext.8 @t[1], @x[1], @x[1], #12 - veor @x[0], @x[0], @t[0] @ x0 ^ (x0 <<< 32) - vext.8 @t[2], @x[2], @x[2], #12 - veor @x[1], @x[1], @t[1] - vext.8 @t[3], @x[3], @x[3], #12 - veor @x[2], @x[2], @t[2] - vext.8 @t[4], @x[4], @x[4], #12 - veor @x[3], @x[3], @t[3] - vext.8 @t[5], @x[5], @x[5], #12 - veor @x[4], @x[4], @t[4] - vext.8 @t[6], @x[6], @x[6], #12 - veor @x[5], @x[5], @t[5] - vext.8 @t[7], @x[7], @x[7], #12 - veor @x[6], @x[6], @t[6] - - veor @t[1], @t[1], @x[0] - veor @x[7], @x[7], @t[7] - vext.8 @x[0], @x[0], @x[0], #8 @ (x0 ^ (x0 <<< 32)) <<< 64) - veor @t[2], @t[2], @x[1] - veor @t[0], @t[0], @x[7] - veor @t[1], @t[1], @x[7] - vext.8 @x[1], @x[1], @x[1], #8 - veor @t[5], @t[5], @x[4] - veor @x[0], @x[0], @t[0] - veor @t[6], @t[6], @x[5] - veor @x[1], @x[1], @t[1] - vext.8 @t[0], @x[4], @x[4], #8 - veor @t[4], @t[4], @x[3] - vext.8 @t[1], @x[5], @x[5], #8 - veor @t[7], @t[7], @x[6] - vext.8 @x[4], @x[3], @x[3], #8 - veor @t[3], @t[3], @x[2] - vext.8 @x[5], @x[7], @x[7], #8 - veor @t[4], @t[4], @x[7] - vext.8 @x[3], @x[6], @x[6], #8 - veor @t[3], @t[3], @x[7] - vext.8 @x[6], @x[2], @x[2], #8 - veor @x[7], @t[1], @t[5] -___ -$code.=<<___ if (!$inv); - veor @x[2], @t[0], @t[4] - veor @x[4], @x[4], @t[3] - veor @x[5], @x[5], @t[7] - veor @x[3], @x[3], @t[6] - @ vmov @x[2], @t[0] - veor @x[6], @x[6], @t[2] - @ vmov @x[7], @t[1] -___ -$code.=<<___ if ($inv); - veor @t[3], @t[3], @x[4] - veor @x[5], @x[5], @t[7] - veor @x[2], @x[3], @t[6] - veor @x[3], @t[0], @t[4] - veor @x[4], @x[6], @t[2] - vmov @x[6], @t[3] - @ vmov @x[7], @t[1] -___ -} - -sub InvMixColumns_orig { -my @x=@_[0..7]; -my @t=@_[8..15]; - -$code.=<<___; - @ multiplication by 0x0e - vext.8 @t[7], @x[7], @x[7], #12 - vmov @t[2], @x[2] - veor @x[2], @x[2], @x[5] @ 2 5 - veor @x[7], @x[7], @x[5] @ 7 5 - vext.8 @t[0], @x[0], @x[0], #12 - vmov @t[5], @x[5] - veor @x[5], @x[5], @x[0] @ 5 0 [1] - veor @x[0], @x[0], @x[1] @ 0 1 - vext.8 @t[1], @x[1], @x[1], #12 - veor @x[1], @x[1], @x[2] @ 1 25 - veor @x[0], @x[0], @x[6] @ 01 6 [2] - vext.8 @t[3], @x[3], @x[3], #12 - veor @x[1], @x[1], @x[3] @ 125 3 [4] - veor @x[2], @x[2], @x[0] @ 25 016 [3] - veor @x[3], @x[3], @x[7] @ 3 75 - veor @x[7], @x[7], @x[6] @ 75 6 [0] - vext.8 @t[6], @x[6], @x[6], #12 - vmov @t[4], @x[4] - veor @x[6], @x[6], @x[4] @ 6 4 - veor @x[4], @x[4], @x[3] @ 4 375 [6] - veor @x[3], @x[3], @x[7] @ 375 756=36 - veor @x[6], @x[6], @t[5] @ 64 5 [7] - veor @x[3], @x[3], @t[2] @ 36 2 - vext.8 @t[5], @t[5], @t[5], #12 - veor @x[3], @x[3], @t[4] @ 362 4 [5] -___ - my @y = @x[7,5,0,2,1,3,4,6]; -$code.=<<___; - @ multiplication by 0x0b - veor @y[1], @y[1], @y[0] - veor @y[0], @y[0], @t[0] - vext.8 @t[2], @t[2], @t[2], #12 - veor @y[1], @y[1], @t[1] - veor @y[0], @y[0], @t[5] - vext.8 @t[4], @t[4], @t[4], #12 - veor @y[1], @y[1], @t[6] - veor @y[0], @y[0], @t[7] - veor @t[7], @t[7], @t[6] @ clobber t[7] - - veor @y[3], @y[3], @t[0] - veor @y[1], @y[1], @y[0] - vext.8 @t[0], @t[0], @t[0], #12 - veor @y[2], @y[2], @t[1] - veor @y[4], @y[4], @t[1] - vext.8 @t[1], @t[1], @t[1], #12 - veor @y[2], @y[2], @t[2] - veor @y[3], @y[3], @t[2] - veor @y[5], @y[5], @t[2] - veor @y[2], @y[2], @t[7] - vext.8 @t[2], @t[2], @t[2], #12 - veor @y[3], @y[3], @t[3] - veor @y[6], @y[6], @t[3] - veor @y[4], @y[4], @t[3] - veor @y[7], @y[7], @t[4] - vext.8 @t[3], @t[3], @t[3], #12 - veor @y[5], @y[5], @t[4] - veor @y[7], @y[7], @t[7] - veor @t[7], @t[7], @t[5] @ clobber t[7] even more - veor @y[3], @y[3], @t[5] - veor @y[4], @y[4], @t[4] - - veor @y[5], @y[5], @t[7] - vext.8 @t[4], @t[4], @t[4], #12 - veor @y[6], @y[6], @t[7] - veor @y[4], @y[4], @t[7] - - veor @t[7], @t[7], @t[5] - vext.8 @t[5], @t[5], @t[5], #12 - - @ multiplication by 0x0d - veor @y[4], @y[4], @y[7] - veor @t[7], @t[7], @t[6] @ restore t[7] - veor @y[7], @y[7], @t[4] - vext.8 @t[6], @t[6], @t[6], #12 - veor @y[2], @y[2], @t[0] - veor @y[7], @y[7], @t[5] - vext.8 @t[7], @t[7], @t[7], #12 - veor @y[2], @y[2], @t[2] - - veor @y[3], @y[3], @y[1] - veor @y[1], @y[1], @t[1] - veor @y[0], @y[0], @t[0] - veor @y[3], @y[3], @t[0] - veor @y[1], @y[1], @t[5] - veor @y[0], @y[0], @t[5] - vext.8 @t[0], @t[0], @t[0], #12 - veor @y[1], @y[1], @t[7] - veor @y[0], @y[0], @t[6] - veor @y[3], @y[3], @y[1] - veor @y[4], @y[4], @t[1] - vext.8 @t[1], @t[1], @t[1], #12 - - veor @y[7], @y[7], @t[7] - veor @y[4], @y[4], @t[2] - veor @y[5], @y[5], @t[2] - veor @y[2], @y[2], @t[6] - veor @t[6], @t[6], @t[3] @ clobber t[6] - vext.8 @t[2], @t[2], @t[2], #12 - veor @y[4], @y[4], @y[7] - veor @y[3], @y[3], @t[6] - - veor @y[6], @y[6], @t[6] - veor @y[5], @y[5], @t[5] - vext.8 @t[5], @t[5], @t[5], #12 - veor @y[6], @y[6], @t[4] - vext.8 @t[4], @t[4], @t[4], #12 - veor @y[5], @y[5], @t[6] - veor @y[6], @y[6], @t[7] - vext.8 @t[7], @t[7], @t[7], #12 - veor @t[6], @t[6], @t[3] @ restore t[6] - vext.8 @t[3], @t[3], @t[3], #12 - - @ multiplication by 0x09 - veor @y[4], @y[4], @y[1] - veor @t[1], @t[1], @y[1] @ t[1]=y[1] - veor @t[0], @t[0], @t[5] @ clobber t[0] - vext.8 @t[6], @t[6], @t[6], #12 - veor @t[1], @t[1], @t[5] - veor @y[3], @y[3], @t[0] - veor @t[0], @t[0], @y[0] @ t[0]=y[0] - veor @t[1], @t[1], @t[6] - veor @t[6], @t[6], @t[7] @ clobber t[6] - veor @y[4], @y[4], @t[1] - veor @y[7], @y[7], @t[4] - veor @y[6], @y[6], @t[3] - veor @y[5], @y[5], @t[2] - veor @t[4], @t[4], @y[4] @ t[4]=y[4] - veor @t[3], @t[3], @y[3] @ t[3]=y[3] - veor @t[5], @t[5], @y[5] @ t[5]=y[5] - veor @t[2], @t[2], @y[2] @ t[2]=y[2] - veor @t[3], @t[3], @t[7] - veor @XMM[5], @t[5], @t[6] - veor @XMM[6], @t[6], @y[6] @ t[6]=y[6] - veor @XMM[2], @t[2], @t[6] - veor @XMM[7], @t[7], @y[7] @ t[7]=y[7] - - vmov @XMM[0], @t[0] - vmov @XMM[1], @t[1] - @ vmov @XMM[2], @t[2] - vmov @XMM[3], @t[3] - vmov @XMM[4], @t[4] - @ vmov @XMM[5], @t[5] - @ vmov @XMM[6], @t[6] - @ vmov @XMM[7], @t[7] -___ -} - -sub InvMixColumns { -my @x=@_[0..7]; -my @t=@_[8..15]; - -# Thanks to Jussi Kivilinna for providing pointer to -# -# | 0e 0b 0d 09 | | 02 03 01 01 | | 05 00 04 00 | -# | 09 0e 0b 0d | = | 01 02 03 01 | x | 00 05 00 04 | -# | 0d 09 0e 0b | | 01 01 02 03 | | 04 00 05 00 | -# | 0b 0d 09 0e | | 03 01 01 02 | | 00 04 00 05 | - -$code.=<<___; - @ multiplication by 0x05-0x00-0x04-0x00 - vext.8 @t[0], @x[0], @x[0], #8 - vext.8 @t[6], @x[6], @x[6], #8 - vext.8 @t[7], @x[7], @x[7], #8 - veor @t[0], @t[0], @x[0] - vext.8 @t[1], @x[1], @x[1], #8 - veor @t[6], @t[6], @x[6] - vext.8 @t[2], @x[2], @x[2], #8 - veor @t[7], @t[7], @x[7] - vext.8 @t[3], @x[3], @x[3], #8 - veor @t[1], @t[1], @x[1] - vext.8 @t[4], @x[4], @x[4], #8 - veor @t[2], @t[2], @x[2] - vext.8 @t[5], @x[5], @x[5], #8 - veor @t[3], @t[3], @x[3] - veor @t[4], @t[4], @x[4] - veor @t[5], @t[5], @x[5] - - veor @x[0], @x[0], @t[6] - veor @x[1], @x[1], @t[6] - veor @x[2], @x[2], @t[0] - veor @x[4], @x[4], @t[2] - veor @x[3], @x[3], @t[1] - veor @x[1], @x[1], @t[7] - veor @x[2], @x[2], @t[7] - veor @x[4], @x[4], @t[6] - veor @x[5], @x[5], @t[3] - veor @x[3], @x[3], @t[6] - veor @x[6], @x[6], @t[4] - veor @x[4], @x[4], @t[7] - veor @x[5], @x[5], @t[7] - veor @x[7], @x[7], @t[5] -___ - &MixColumns (@x,@t,1); # flipped 2<->3 and 4<->6 -} - -sub swapmove { -my ($a,$b,$n,$mask,$t)=@_; -$code.=<<___; - vshr.u64 $t, $b, #$n - veor $t, $t, $a - vand $t, $t, $mask - veor $a, $a, $t - vshl.u64 $t, $t, #$n - veor $b, $b, $t -___ -} -sub swapmove2x { -my ($a0,$b0,$a1,$b1,$n,$mask,$t0,$t1)=@_; -$code.=<<___; - vshr.u64 $t0, $b0, #$n - vshr.u64 $t1, $b1, #$n - veor $t0, $t0, $a0 - veor $t1, $t1, $a1 - vand $t0, $t0, $mask - vand $t1, $t1, $mask - veor $a0, $a0, $t0 - vshl.u64 $t0, $t0, #$n - veor $a1, $a1, $t1 - vshl.u64 $t1, $t1, #$n - veor $b0, $b0, $t0 - veor $b1, $b1, $t1 -___ -} - -sub bitslice { -my @x=reverse(@_[0..7]); -my ($t0,$t1,$t2,$t3)=@_[8..11]; -$code.=<<___; - vmov.i8 $t0,#0x55 @ compose .LBS0 - vmov.i8 $t1,#0x33 @ compose .LBS1 -___ - &swapmove2x(@x[0,1,2,3],1,$t0,$t2,$t3); - &swapmove2x(@x[4,5,6,7],1,$t0,$t2,$t3); -$code.=<<___; - vmov.i8 $t0,#0x0f @ compose .LBS2 -___ - &swapmove2x(@x[0,2,1,3],2,$t1,$t2,$t3); - &swapmove2x(@x[4,6,5,7],2,$t1,$t2,$t3); - - &swapmove2x(@x[0,4,1,5],4,$t0,$t2,$t3); - &swapmove2x(@x[2,6,3,7],4,$t0,$t2,$t3); -} - -$code.=<<___; -#ifndef __KERNEL__ -# include "arm_arch.h" - -# define VFP_ABI_PUSH vstmdb sp!,{d8-d15} -# define VFP_ABI_POP vldmia sp!,{d8-d15} -# define VFP_ABI_FRAME 0x40 -#else -# define VFP_ABI_PUSH -# define VFP_ABI_POP -# define VFP_ABI_FRAME 0 -# define BSAES_ASM_EXTENDED_KEY -# define XTS_CHAIN_TWEAK -# define __ARM_ARCH__ __LINUX_ARM_ARCH__ -# define __ARM_MAX_ARCH__ 7 -#endif - -#ifdef __thumb__ -# define adrl adr -#endif - -#if __ARM_MAX_ARCH__>=7 -.arch armv7-a -.fpu neon - -.text -.syntax unified @ ARMv7-capable assembler is expected to handle this -#ifdef __thumb2__ -.thumb -#else -.code 32 -#endif - -.type _bsaes_decrypt8,%function -.align 4 -_bsaes_decrypt8: - adr $const,_bsaes_decrypt8 - vldmia $key!, {@XMM[9]} @ round 0 key - add $const,$const,#.LM0ISR-_bsaes_decrypt8 - - vldmia $const!, {@XMM[8]} @ .LM0ISR - veor @XMM[10], @XMM[0], @XMM[9] @ xor with round0 key - veor @XMM[11], @XMM[1], @XMM[9] - vtbl.8 `&Dlo(@XMM[0])`, {@XMM[10]}, `&Dlo(@XMM[8])` - vtbl.8 `&Dhi(@XMM[0])`, {@XMM[10]}, `&Dhi(@XMM[8])` - veor @XMM[12], @XMM[2], @XMM[9] - vtbl.8 `&Dlo(@XMM[1])`, {@XMM[11]}, `&Dlo(@XMM[8])` - vtbl.8 `&Dhi(@XMM[1])`, {@XMM[11]}, `&Dhi(@XMM[8])` - veor @XMM[13], @XMM[3], @XMM[9] - vtbl.8 `&Dlo(@XMM[2])`, {@XMM[12]}, `&Dlo(@XMM[8])` - vtbl.8 `&Dhi(@XMM[2])`, {@XMM[12]}, `&Dhi(@XMM[8])` - veor @XMM[14], @XMM[4], @XMM[9] - vtbl.8 `&Dlo(@XMM[3])`, {@XMM[13]}, `&Dlo(@XMM[8])` - vtbl.8 `&Dhi(@XMM[3])`, {@XMM[13]}, `&Dhi(@XMM[8])` - veor @XMM[15], @XMM[5], @XMM[9] - vtbl.8 `&Dlo(@XMM[4])`, {@XMM[14]}, `&Dlo(@XMM[8])` - vtbl.8 `&Dhi(@XMM[4])`, {@XMM[14]}, `&Dhi(@XMM[8])` - veor @XMM[10], @XMM[6], @XMM[9] - vtbl.8 `&Dlo(@XMM[5])`, {@XMM[15]}, `&Dlo(@XMM[8])` - vtbl.8 `&Dhi(@XMM[5])`, {@XMM[15]}, `&Dhi(@XMM[8])` - veor @XMM[11], @XMM[7], @XMM[9] - vtbl.8 `&Dlo(@XMM[6])`, {@XMM[10]}, `&Dlo(@XMM[8])` - vtbl.8 `&Dhi(@XMM[6])`, {@XMM[10]}, `&Dhi(@XMM[8])` - vtbl.8 `&Dlo(@XMM[7])`, {@XMM[11]}, `&Dlo(@XMM[8])` - vtbl.8 `&Dhi(@XMM[7])`, {@XMM[11]}, `&Dhi(@XMM[8])` -___ - &bitslice (@XMM[0..7, 8..11]); -$code.=<<___; - sub $rounds,$rounds,#1 - b .Ldec_sbox -.align 4 -.Ldec_loop: -___ - &ShiftRows (@XMM[0..7, 8..12]); -$code.=".Ldec_sbox:\n"; - &InvSbox (@XMM[0..7, 8..15]); -$code.=<<___; - subs $rounds,$rounds,#1 - bcc .Ldec_done -___ - &InvMixColumns (@XMM[0,1,6,4,2,7,3,5, 8..15]); -$code.=<<___; - vldmia $const, {@XMM[12]} @ .LISR - ite eq @ Thumb2 thing, sanity check in ARM - addeq $const,$const,#0x10 - bne .Ldec_loop - vldmia $const, {@XMM[12]} @ .LISRM0 - b .Ldec_loop -.align 4 -.Ldec_done: -___ - &bitslice (@XMM[0,1,6,4,2,7,3,5, 8..11]); -$code.=<<___; - vldmia $key, {@XMM[8]} @ last round key - veor @XMM[6], @XMM[6], @XMM[8] - veor @XMM[4], @XMM[4], @XMM[8] - veor @XMM[2], @XMM[2], @XMM[8] - veor @XMM[7], @XMM[7], @XMM[8] - veor @XMM[3], @XMM[3], @XMM[8] - veor @XMM[5], @XMM[5], @XMM[8] - veor @XMM[0], @XMM[0], @XMM[8] - veor @XMM[1], @XMM[1], @XMM[8] - bx lr -.size _bsaes_decrypt8,.-_bsaes_decrypt8 - -.type _bsaes_const,%object -.align 6 -_bsaes_const: -.LM0ISR: @ InvShiftRows constants - .quad 0x0a0e0206070b0f03, 0x0004080c0d010509 -.LISR: - .quad 0x0504070602010003, 0x0f0e0d0c080b0a09 -.LISRM0: - .quad 0x01040b0e0205080f, 0x0306090c00070a0d -.LM0SR: @ ShiftRows constants - .quad 0x0a0e02060f03070b, 0x0004080c05090d01 -.LSR: - .quad 0x0504070600030201, 0x0f0e0d0c0a09080b -.LSRM0: - .quad 0x0304090e00050a0f, 0x01060b0c0207080d -.LM0: - .quad 0x02060a0e03070b0f, 0x0004080c0105090d -.LREVM0SR: - .quad 0x090d01050c000408, 0x03070b0f060a0e02 -.asciz "Bit-sliced AES for NEON, CRYPTOGAMS by <appro\@openssl.org>" -.align 6 -.size _bsaes_const,.-_bsaes_const - -.type _bsaes_encrypt8,%function -.align 4 -_bsaes_encrypt8: - adr $const,_bsaes_encrypt8 - vldmia $key!, {@XMM[9]} @ round 0 key - sub $const,$const,#_bsaes_encrypt8-.LM0SR - - vldmia $const!, {@XMM[8]} @ .LM0SR -_bsaes_encrypt8_alt: - veor @XMM[10], @XMM[0], @XMM[9] @ xor with round0 key - veor @XMM[11], @XMM[1], @XMM[9] - vtbl.8 `&Dlo(@XMM[0])`, {@XMM[10]}, `&Dlo(@XMM[8])` - vtbl.8 `&Dhi(@XMM[0])`, {@XMM[10]}, `&Dhi(@XMM[8])` - veor @XMM[12], @XMM[2], @XMM[9] - vtbl.8 `&Dlo(@XMM[1])`, {@XMM[11]}, `&Dlo(@XMM[8])` - vtbl.8 `&Dhi(@XMM[1])`, {@XMM[11]}, `&Dhi(@XMM[8])` - veor @XMM[13], @XMM[3], @XMM[9] - vtbl.8 `&Dlo(@XMM[2])`, {@XMM[12]}, `&Dlo(@XMM[8])` - vtbl.8 `&Dhi(@XMM[2])`, {@XMM[12]}, `&Dhi(@XMM[8])` - veor @XMM[14], @XMM[4], @XMM[9] - vtbl.8 `&Dlo(@XMM[3])`, {@XMM[13]}, `&Dlo(@XMM[8])` - vtbl.8 `&Dhi(@XMM[3])`, {@XMM[13]}, `&Dhi(@XMM[8])` - veor @XMM[15], @XMM[5], @XMM[9] - vtbl.8 `&Dlo(@XMM[4])`, {@XMM[14]}, `&Dlo(@XMM[8])` - vtbl.8 `&Dhi(@XMM[4])`, {@XMM[14]}, `&Dhi(@XMM[8])` - veor @XMM[10], @XMM[6], @XMM[9] - vtbl.8 `&Dlo(@XMM[5])`, {@XMM[15]}, `&Dlo(@XMM[8])` - vtbl.8 `&Dhi(@XMM[5])`, {@XMM[15]}, `&Dhi(@XMM[8])` - veor @XMM[11], @XMM[7], @XMM[9] - vtbl.8 `&Dlo(@XMM[6])`, {@XMM[10]}, `&Dlo(@XMM[8])` - vtbl.8 `&Dhi(@XMM[6])`, {@XMM[10]}, `&Dhi(@XMM[8])` - vtbl.8 `&Dlo(@XMM[7])`, {@XMM[11]}, `&Dlo(@XMM[8])` - vtbl.8 `&Dhi(@XMM[7])`, {@XMM[11]}, `&Dhi(@XMM[8])` -_bsaes_encrypt8_bitslice: -___ - &bitslice (@XMM[0..7, 8..11]); -$code.=<<___; - sub $rounds,$rounds,#1 - b .Lenc_sbox -.align 4 -.Lenc_loop: -___ - &ShiftRows (@XMM[0..7, 8..12]); -$code.=".Lenc_sbox:\n"; - &Sbox (@XMM[0..7, 8..15]); -$code.=<<___; - subs $rounds,$rounds,#1 - bcc .Lenc_done -___ - &MixColumns (@XMM[0,1,4,6,3,7,2,5, 8..15]); -$code.=<<___; - vldmia $const, {@XMM[12]} @ .LSR - ite eq @ Thumb2 thing, samity check in ARM - addeq $const,$const,#0x10 - bne .Lenc_loop - vldmia $const, {@XMM[12]} @ .LSRM0 - b .Lenc_loop -.align 4 -.Lenc_done: -___ - # output in lsb > [t0, t1, t4, t6, t3, t7, t2, t5] < msb - &bitslice (@XMM[0,1,4,6,3,7,2,5, 8..11]); -$code.=<<___; - vldmia $key, {@XMM[8]} @ last round key - veor @XMM[4], @XMM[4], @XMM[8] - veor @XMM[6], @XMM[6], @XMM[8] - veor @XMM[3], @XMM[3], @XMM[8] - veor @XMM[7], @XMM[7], @XMM[8] - veor @XMM[2], @XMM[2], @XMM[8] - veor @XMM[5], @XMM[5], @XMM[8] - veor @XMM[0], @XMM[0], @XMM[8] - veor @XMM[1], @XMM[1], @XMM[8] - bx lr -.size _bsaes_encrypt8,.-_bsaes_encrypt8 -___ -} -{ -my ($out,$inp,$rounds,$const)=("r12","r4","r5","r6"); - -sub bitslice_key { -my @x=reverse(@_[0..7]); -my ($bs0,$bs1,$bs2,$t2,$t3)=@_[8..12]; - - &swapmove (@x[0,1],1,$bs0,$t2,$t3); -$code.=<<___; - @ &swapmove(@x[2,3],1,$t0,$t2,$t3); - vmov @x[2], @x[0] - vmov @x[3], @x[1] -___ - #&swapmove2x(@x[4,5,6,7],1,$t0,$t2,$t3); - - &swapmove2x (@x[0,2,1,3],2,$bs1,$t2,$t3); -$code.=<<___; - @ &swapmove2x(@x[4,6,5,7],2,$t1,$t2,$t3); - vmov @x[4], @x[0] - vmov @x[6], @x[2] - vmov @x[5], @x[1] - vmov @x[7], @x[3] -___ - &swapmove2x (@x[0,4,1,5],4,$bs2,$t2,$t3); - &swapmove2x (@x[2,6,3,7],4,$bs2,$t2,$t3); -} - -$code.=<<___; -.type _bsaes_key_convert,%function -.align 4 -_bsaes_key_convert: - adr $const,_bsaes_key_convert - vld1.8 {@XMM[7]}, [$inp]! @ load round 0 key - sub $const,$const,#_bsaes_key_convert-.LM0 - vld1.8 {@XMM[15]}, [$inp]! @ load round 1 key - - vmov.i8 @XMM[8], #0x01 @ bit masks - vmov.i8 @XMM[9], #0x02 - vmov.i8 @XMM[10], #0x04 - vmov.i8 @XMM[11], #0x08 - vmov.i8 @XMM[12], #0x10 - vmov.i8 @XMM[13], #0x20 - vldmia $const, {@XMM[14]} @ .LM0 - -#ifdef __ARMEL__ - vrev32.8 @XMM[7], @XMM[7] - vrev32.8 @XMM[15], @XMM[15] -#endif - sub $rounds,$rounds,#1 - vstmia $out!, {@XMM[7]} @ save round 0 key - b .Lkey_loop - -.align 4 -.Lkey_loop: - vtbl.8 `&Dlo(@XMM[7])`,{@XMM[15]},`&Dlo(@XMM[14])` - vtbl.8 `&Dhi(@XMM[7])`,{@XMM[15]},`&Dhi(@XMM[14])` - vmov.i8 @XMM[6], #0x40 - vmov.i8 @XMM[15], #0x80 - - vtst.8 @XMM[0], @XMM[7], @XMM[8] - vtst.8 @XMM[1], @XMM[7], @XMM[9] - vtst.8 @XMM[2], @XMM[7], @XMM[10] - vtst.8 @XMM[3], @XMM[7], @XMM[11] - vtst.8 @XMM[4], @XMM[7], @XMM[12] - vtst.8 @XMM[5], @XMM[7], @XMM[13] - vtst.8 @XMM[6], @XMM[7], @XMM[6] - vtst.8 @XMM[7], @XMM[7], @XMM[15] - vld1.8 {@XMM[15]}, [$inp]! @ load next round key - vmvn @XMM[0], @XMM[0] @ "pnot" - vmvn @XMM[1], @XMM[1] - vmvn @XMM[5], @XMM[5] - vmvn @XMM[6], @XMM[6] -#ifdef __ARMEL__ - vrev32.8 @XMM[15], @XMM[15] -#endif - subs $rounds,$rounds,#1 - vstmia $out!,{@XMM[0]-@XMM[7]} @ write bit-sliced round key - bne .Lkey_loop - - vmov.i8 @XMM[7],#0x63 @ compose .L63 - @ don't save last round key - bx lr -.size _bsaes_key_convert,.-_bsaes_key_convert -___ -} - -if (0) { # following four functions are unsupported interface - # used for benchmarking... -$code.=<<___; -.globl bsaes_enc_key_convert -.type bsaes_enc_key_convert,%function -.align 4 -bsaes_enc_key_convert: - stmdb sp!,{r4-r6,lr} - vstmdb sp!,{d8-d15} @ ABI specification says so - - ldr r5,[$inp,#240] @ pass rounds - mov r4,$inp @ pass key - mov r12,$out @ pass key schedule - bl _bsaes_key_convert - veor @XMM[7],@XMM[7],@XMM[15] @ fix up last round key - vstmia r12, {@XMM[7]} @ save last round key - - vldmia sp!,{d8-d15} - ldmia sp!,{r4-r6,pc} -.size bsaes_enc_key_convert,.-bsaes_enc_key_convert - -.globl bsaes_encrypt_128 -.type bsaes_encrypt_128,%function -.align 4 -bsaes_encrypt_128: - stmdb sp!,{r4-r6,lr} - vstmdb sp!,{d8-d15} @ ABI specification says so -.Lenc128_loop: - vld1.8 {@XMM[0]-@XMM[1]}, [$inp]! @ load input - vld1.8 {@XMM[2]-@XMM[3]}, [$inp]! - mov r4,$key @ pass the key - vld1.8 {@XMM[4]-@XMM[5]}, [$inp]! - mov r5,#10 @ pass rounds - vld1.8 {@XMM[6]-@XMM[7]}, [$inp]! - - bl _bsaes_encrypt8 - - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! @ write output - vst1.8 {@XMM[4]}, [$out]! - vst1.8 {@XMM[6]}, [$out]! - vst1.8 {@XMM[3]}, [$out]! - vst1.8 {@XMM[7]}, [$out]! - vst1.8 {@XMM[2]}, [$out]! - subs $len,$len,#0x80 - vst1.8 {@XMM[5]}, [$out]! - bhi .Lenc128_loop - - vldmia sp!,{d8-d15} - ldmia sp!,{r4-r6,pc} -.size bsaes_encrypt_128,.-bsaes_encrypt_128 - -.globl bsaes_dec_key_convert -.type bsaes_dec_key_convert,%function -.align 4 -bsaes_dec_key_convert: - stmdb sp!,{r4-r6,lr} - vstmdb sp!,{d8-d15} @ ABI specification says so - - ldr r5,[$inp,#240] @ pass rounds - mov r4,$inp @ pass key - mov r12,$out @ pass key schedule - bl _bsaes_key_convert - vldmia $out, {@XMM[6]} - vstmia r12, {@XMM[15]} @ save last round key - veor @XMM[7], @XMM[7], @XMM[6] @ fix up round 0 key - vstmia $out, {@XMM[7]} - - vldmia sp!,{d8-d15} - ldmia sp!,{r4-r6,pc} -.size bsaes_dec_key_convert,.-bsaes_dec_key_convert - -.globl bsaes_decrypt_128 -.type bsaes_decrypt_128,%function -.align 4 -bsaes_decrypt_128: - stmdb sp!,{r4-r6,lr} - vstmdb sp!,{d8-d15} @ ABI specification says so -.Ldec128_loop: - vld1.8 {@XMM[0]-@XMM[1]}, [$inp]! @ load input - vld1.8 {@XMM[2]-@XMM[3]}, [$inp]! - mov r4,$key @ pass the key - vld1.8 {@XMM[4]-@XMM[5]}, [$inp]! - mov r5,#10 @ pass rounds - vld1.8 {@XMM[6]-@XMM[7]}, [$inp]! - - bl _bsaes_decrypt8 - - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! @ write output - vst1.8 {@XMM[6]}, [$out]! - vst1.8 {@XMM[4]}, [$out]! - vst1.8 {@XMM[2]}, [$out]! - vst1.8 {@XMM[7]}, [$out]! - vst1.8 {@XMM[3]}, [$out]! - subs $len,$len,#0x80 - vst1.8 {@XMM[5]}, [$out]! - bhi .Ldec128_loop - - vldmia sp!,{d8-d15} - ldmia sp!,{r4-r6,pc} -.size bsaes_decrypt_128,.-bsaes_decrypt_128 -___ -} -{ -my ($inp,$out,$len,$key, $ivp,$fp,$rounds)=map("r$_",(0..3,8..10)); -my ($keysched)=("sp"); - -$code.=<<___; -.extern AES_cbc_encrypt -.extern AES_decrypt - -.global bsaes_cbc_encrypt -.type bsaes_cbc_encrypt,%function -.align 5 -bsaes_cbc_encrypt: -#ifndef __KERNEL__ - cmp $len, #128 -#ifndef __thumb__ - blo AES_cbc_encrypt -#else - bhs 1f - b AES_cbc_encrypt -1: -#endif -#endif - - @ it is up to the caller to make sure we are called with enc == 0 - - mov ip, sp - stmdb sp!, {r4-r10, lr} - VFP_ABI_PUSH - ldr $ivp, [ip] @ IV is 1st arg on the stack - mov $len, $len, lsr#4 @ len in 16 byte blocks - sub sp, #0x10 @ scratch space to carry over the IV - mov $fp, sp @ save sp - - ldr $rounds, [$key, #240] @ get # of rounds -#ifndef BSAES_ASM_EXTENDED_KEY - @ allocate the key schedule on the stack - sub r12, sp, $rounds, lsl#7 @ 128 bytes per inner round key - add r12, #`128-32` @ sifze of bit-slices key schedule - - @ populate the key schedule - mov r4, $key @ pass key - mov r5, $rounds @ pass # of rounds - mov sp, r12 @ sp is $keysched - bl _bsaes_key_convert - vldmia $keysched, {@XMM[6]} - vstmia r12, {@XMM[15]} @ save last round key - veor @XMM[7], @XMM[7], @XMM[6] @ fix up round 0 key - vstmia $keysched, {@XMM[7]} -#else - ldr r12, [$key, #244] - eors r12, #1 - beq 0f - - @ populate the key schedule - str r12, [$key, #244] - mov r4, $key @ pass key - mov r5, $rounds @ pass # of rounds - add r12, $key, #248 @ pass key schedule - bl _bsaes_key_convert - add r4, $key, #248 - vldmia r4, {@XMM[6]} - vstmia r12, {@XMM[15]} @ save last round key - veor @XMM[7], @XMM[7], @XMM[6] @ fix up round 0 key - vstmia r4, {@XMM[7]} - -.align 2 -0: -#endif - - vld1.8 {@XMM[15]}, [$ivp] @ load IV - b .Lcbc_dec_loop - -.align 4 -.Lcbc_dec_loop: - subs $len, $len, #0x8 - bmi .Lcbc_dec_loop_finish - - vld1.8 {@XMM[0]-@XMM[1]}, [$inp]! @ load input - vld1.8 {@XMM[2]-@XMM[3]}, [$inp]! -#ifndef BSAES_ASM_EXTENDED_KEY - mov r4, $keysched @ pass the key -#else - add r4, $key, #248 -#endif - vld1.8 {@XMM[4]-@XMM[5]}, [$inp]! - mov r5, $rounds - vld1.8 {@XMM[6]-@XMM[7]}, [$inp] - sub $inp, $inp, #0x60 - vstmia $fp, {@XMM[15]} @ put aside IV - - bl _bsaes_decrypt8 - - vldmia $fp, {@XMM[14]} @ reload IV - vld1.8 {@XMM[8]-@XMM[9]}, [$inp]! @ reload input - veor @XMM[0], @XMM[0], @XMM[14] @ ^= IV - vld1.8 {@XMM[10]-@XMM[11]}, [$inp]! - veor @XMM[1], @XMM[1], @XMM[8] - veor @XMM[6], @XMM[6], @XMM[9] - vld1.8 {@XMM[12]-@XMM[13]}, [$inp]! - veor @XMM[4], @XMM[4], @XMM[10] - veor @XMM[2], @XMM[2], @XMM[11] - vld1.8 {@XMM[14]-@XMM[15]}, [$inp]! - veor @XMM[7], @XMM[7], @XMM[12] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! @ write output - veor @XMM[3], @XMM[3], @XMM[13] - vst1.8 {@XMM[6]}, [$out]! - veor @XMM[5], @XMM[5], @XMM[14] - vst1.8 {@XMM[4]}, [$out]! - vst1.8 {@XMM[2]}, [$out]! - vst1.8 {@XMM[7]}, [$out]! - vst1.8 {@XMM[3]}, [$out]! - vst1.8 {@XMM[5]}, [$out]! - - b .Lcbc_dec_loop - -.Lcbc_dec_loop_finish: - adds $len, $len, #8 - beq .Lcbc_dec_done - - vld1.8 {@XMM[0]}, [$inp]! @ load input - cmp $len, #2 - blo .Lcbc_dec_one - vld1.8 {@XMM[1]}, [$inp]! -#ifndef BSAES_ASM_EXTENDED_KEY - mov r4, $keysched @ pass the key -#else - add r4, $key, #248 -#endif - mov r5, $rounds - vstmia $fp, {@XMM[15]} @ put aside IV - beq .Lcbc_dec_two - vld1.8 {@XMM[2]}, [$inp]! - cmp $len, #4 - blo .Lcbc_dec_three - vld1.8 {@XMM[3]}, [$inp]! - beq .Lcbc_dec_four - vld1.8 {@XMM[4]}, [$inp]! - cmp $len, #6 - blo .Lcbc_dec_five - vld1.8 {@XMM[5]}, [$inp]! - beq .Lcbc_dec_six - vld1.8 {@XMM[6]}, [$inp]! - sub $inp, $inp, #0x70 - - bl _bsaes_decrypt8 - - vldmia $fp, {@XMM[14]} @ reload IV - vld1.8 {@XMM[8]-@XMM[9]}, [$inp]! @ reload input - veor @XMM[0], @XMM[0], @XMM[14] @ ^= IV - vld1.8 {@XMM[10]-@XMM[11]}, [$inp]! - veor @XMM[1], @XMM[1], @XMM[8] - veor @XMM[6], @XMM[6], @XMM[9] - vld1.8 {@XMM[12]-@XMM[13]}, [$inp]! - veor @XMM[4], @XMM[4], @XMM[10] - veor @XMM[2], @XMM[2], @XMM[11] - vld1.8 {@XMM[15]}, [$inp]! - veor @XMM[7], @XMM[7], @XMM[12] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! @ write output - veor @XMM[3], @XMM[3], @XMM[13] - vst1.8 {@XMM[6]}, [$out]! - vst1.8 {@XMM[4]}, [$out]! - vst1.8 {@XMM[2]}, [$out]! - vst1.8 {@XMM[7]}, [$out]! - vst1.8 {@XMM[3]}, [$out]! - b .Lcbc_dec_done -.align 4 -.Lcbc_dec_six: - sub $inp, $inp, #0x60 - bl _bsaes_decrypt8 - vldmia $fp,{@XMM[14]} @ reload IV - vld1.8 {@XMM[8]-@XMM[9]}, [$inp]! @ reload input - veor @XMM[0], @XMM[0], @XMM[14] @ ^= IV - vld1.8 {@XMM[10]-@XMM[11]}, [$inp]! - veor @XMM[1], @XMM[1], @XMM[8] - veor @XMM[6], @XMM[6], @XMM[9] - vld1.8 {@XMM[12]}, [$inp]! - veor @XMM[4], @XMM[4], @XMM[10] - veor @XMM[2], @XMM[2], @XMM[11] - vld1.8 {@XMM[15]}, [$inp]! - veor @XMM[7], @XMM[7], @XMM[12] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! @ write output - vst1.8 {@XMM[6]}, [$out]! - vst1.8 {@XMM[4]}, [$out]! - vst1.8 {@XMM[2]}, [$out]! - vst1.8 {@XMM[7]}, [$out]! - b .Lcbc_dec_done -.align 4 -.Lcbc_dec_five: - sub $inp, $inp, #0x50 - bl _bsaes_decrypt8 - vldmia $fp, {@XMM[14]} @ reload IV - vld1.8 {@XMM[8]-@XMM[9]}, [$inp]! @ reload input - veor @XMM[0], @XMM[0], @XMM[14] @ ^= IV - vld1.8 {@XMM[10]-@XMM[11]}, [$inp]! - veor @XMM[1], @XMM[1], @XMM[8] - veor @XMM[6], @XMM[6], @XMM[9] - vld1.8 {@XMM[15]}, [$inp]! - veor @XMM[4], @XMM[4], @XMM[10] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! @ write output - veor @XMM[2], @XMM[2], @XMM[11] - vst1.8 {@XMM[6]}, [$out]! - vst1.8 {@XMM[4]}, [$out]! - vst1.8 {@XMM[2]}, [$out]! - b .Lcbc_dec_done -.align 4 -.Lcbc_dec_four: - sub $inp, $inp, #0x40 - bl _bsaes_decrypt8 - vldmia $fp, {@XMM[14]} @ reload IV - vld1.8 {@XMM[8]-@XMM[9]}, [$inp]! @ reload input - veor @XMM[0], @XMM[0], @XMM[14] @ ^= IV - vld1.8 {@XMM[10]}, [$inp]! - veor @XMM[1], @XMM[1], @XMM[8] - veor @XMM[6], @XMM[6], @XMM[9] - vld1.8 {@XMM[15]}, [$inp]! - veor @XMM[4], @XMM[4], @XMM[10] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! @ write output - vst1.8 {@XMM[6]}, [$out]! - vst1.8 {@XMM[4]}, [$out]! - b .Lcbc_dec_done -.align 4 -.Lcbc_dec_three: - sub $inp, $inp, #0x30 - bl _bsaes_decrypt8 - vldmia $fp, {@XMM[14]} @ reload IV - vld1.8 {@XMM[8]-@XMM[9]}, [$inp]! @ reload input - veor @XMM[0], @XMM[0], @XMM[14] @ ^= IV - vld1.8 {@XMM[15]}, [$inp]! - veor @XMM[1], @XMM[1], @XMM[8] - veor @XMM[6], @XMM[6], @XMM[9] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! @ write output - vst1.8 {@XMM[6]}, [$out]! - b .Lcbc_dec_done -.align 4 -.Lcbc_dec_two: - sub $inp, $inp, #0x20 - bl _bsaes_decrypt8 - vldmia $fp, {@XMM[14]} @ reload IV - vld1.8 {@XMM[8]}, [$inp]! @ reload input - veor @XMM[0], @XMM[0], @XMM[14] @ ^= IV - vld1.8 {@XMM[15]}, [$inp]! @ reload input - veor @XMM[1], @XMM[1], @XMM[8] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! @ write output - b .Lcbc_dec_done -.align 4 -.Lcbc_dec_one: - sub $inp, $inp, #0x10 - mov $rounds, $out @ save original out pointer - mov $out, $fp @ use the iv scratch space as out buffer - mov r2, $key - vmov @XMM[4],@XMM[15] @ just in case ensure that IV - vmov @XMM[5],@XMM[0] @ and input are preserved - bl AES_decrypt - vld1.8 {@XMM[0]}, [$fp,:64] @ load result - veor @XMM[0], @XMM[0], @XMM[4] @ ^= IV - vmov @XMM[15], @XMM[5] @ @XMM[5] holds input - vst1.8 {@XMM[0]}, [$rounds] @ write output - -.Lcbc_dec_done: -#ifndef BSAES_ASM_EXTENDED_KEY - vmov.i32 q0, #0 - vmov.i32 q1, #0 -.Lcbc_dec_bzero: @ wipe key schedule [if any] - vstmia $keysched!, {q0-q1} - cmp $keysched, $fp - bne .Lcbc_dec_bzero -#endif - - mov sp, $fp - add sp, #0x10 @ add sp,$fp,#0x10 is no good for thumb - vst1.8 {@XMM[15]}, [$ivp] @ return IV - VFP_ABI_POP - ldmia sp!, {r4-r10, pc} -.size bsaes_cbc_encrypt,.-bsaes_cbc_encrypt -___ -} -{ -my ($inp,$out,$len,$key, $ctr,$fp,$rounds)=(map("r$_",(0..3,8..10))); -my $const = "r6"; # shared with _bsaes_encrypt8_alt -my $keysched = "sp"; - -$code.=<<___; -.extern AES_encrypt -.global bsaes_ctr32_encrypt_blocks -.type bsaes_ctr32_encrypt_blocks,%function -.align 5 -bsaes_ctr32_encrypt_blocks: - cmp $len, #8 @ use plain AES for - blo .Lctr_enc_short @ small sizes - - mov ip, sp - stmdb sp!, {r4-r10, lr} - VFP_ABI_PUSH - ldr $ctr, [ip] @ ctr is 1st arg on the stack - sub sp, sp, #0x10 @ scratch space to carry over the ctr - mov $fp, sp @ save sp - - ldr $rounds, [$key, #240] @ get # of rounds -#ifndef BSAES_ASM_EXTENDED_KEY - @ allocate the key schedule on the stack - sub r12, sp, $rounds, lsl#7 @ 128 bytes per inner round key - add r12, #`128-32` @ size of bit-sliced key schedule - - @ populate the key schedule - mov r4, $key @ pass key - mov r5, $rounds @ pass # of rounds - mov sp, r12 @ sp is $keysched - bl _bsaes_key_convert - veor @XMM[7],@XMM[7],@XMM[15] @ fix up last round key - vstmia r12, {@XMM[7]} @ save last round key - - vld1.8 {@XMM[0]}, [$ctr] @ load counter - add $ctr, $const, #.LREVM0SR-.LM0 @ borrow $ctr - vldmia $keysched, {@XMM[4]} @ load round0 key -#else - ldr r12, [$key, #244] - eors r12, #1 - beq 0f - - @ populate the key schedule - str r12, [$key, #244] - mov r4, $key @ pass key - mov r5, $rounds @ pass # of rounds - add r12, $key, #248 @ pass key schedule - bl _bsaes_key_convert - veor @XMM[7],@XMM[7],@XMM[15] @ fix up last round key - vstmia r12, {@XMM[7]} @ save last round key - -.align 2 -0: add r12, $key, #248 - vld1.8 {@XMM[0]}, [$ctr] @ load counter - adrl $ctr, .LREVM0SR @ borrow $ctr - vldmia r12, {@XMM[4]} @ load round0 key - sub sp, #0x10 @ place for adjusted round0 key -#endif - - vmov.i32 @XMM[8],#1 @ compose 1<<96 - veor @XMM[9],@XMM[9],@XMM[9] - vrev32.8 @XMM[0],@XMM[0] - vext.8 @XMM[8],@XMM[9],@XMM[8],#4 - vrev32.8 @XMM[4],@XMM[4] - vadd.u32 @XMM[9],@XMM[8],@XMM[8] @ compose 2<<96 - vstmia $keysched, {@XMM[4]} @ save adjusted round0 key - b .Lctr_enc_loop - -.align 4 -.Lctr_enc_loop: - vadd.u32 @XMM[10], @XMM[8], @XMM[9] @ compose 3<<96 - vadd.u32 @XMM[1], @XMM[0], @XMM[8] @ +1 - vadd.u32 @XMM[2], @XMM[0], @XMM[9] @ +2 - vadd.u32 @XMM[3], @XMM[0], @XMM[10] @ +3 - vadd.u32 @XMM[4], @XMM[1], @XMM[10] - vadd.u32 @XMM[5], @XMM[2], @XMM[10] - vadd.u32 @XMM[6], @XMM[3], @XMM[10] - vadd.u32 @XMM[7], @XMM[4], @XMM[10] - vadd.u32 @XMM[10], @XMM[5], @XMM[10] @ next counter - - @ Borrow prologue from _bsaes_encrypt8 to use the opportunity - @ to flip byte order in 32-bit counter - - vldmia $keysched, {@XMM[9]} @ load round0 key -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, $keysched, #0x10 @ pass next round key -#else - add r4, $key, #`248+16` -#endif - vldmia $ctr, {@XMM[8]} @ .LREVM0SR - mov r5, $rounds @ pass rounds - vstmia $fp, {@XMM[10]} @ save next counter - sub $const, $ctr, #.LREVM0SR-.LSR @ pass constants - - bl _bsaes_encrypt8_alt - - subs $len, $len, #8 - blo .Lctr_enc_loop_done - - vld1.8 {@XMM[8]-@XMM[9]}, [$inp]! @ load input - vld1.8 {@XMM[10]-@XMM[11]}, [$inp]! - veor @XMM[0], @XMM[8] - veor @XMM[1], @XMM[9] - vld1.8 {@XMM[12]-@XMM[13]}, [$inp]! - veor @XMM[4], @XMM[10] - veor @XMM[6], @XMM[11] - vld1.8 {@XMM[14]-@XMM[15]}, [$inp]! - veor @XMM[3], @XMM[12] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! @ write output - veor @XMM[7], @XMM[13] - veor @XMM[2], @XMM[14] - vst1.8 {@XMM[4]}, [$out]! - veor @XMM[5], @XMM[15] - vst1.8 {@XMM[6]}, [$out]! - vmov.i32 @XMM[8], #1 @ compose 1<<96 - vst1.8 {@XMM[3]}, [$out]! - veor @XMM[9], @XMM[9], @XMM[9] - vst1.8 {@XMM[7]}, [$out]! - vext.8 @XMM[8], @XMM[9], @XMM[8], #4 - vst1.8 {@XMM[2]}, [$out]! - vadd.u32 @XMM[9],@XMM[8],@XMM[8] @ compose 2<<96 - vst1.8 {@XMM[5]}, [$out]! - vldmia $fp, {@XMM[0]} @ load counter - - bne .Lctr_enc_loop - b .Lctr_enc_done - -.align 4 -.Lctr_enc_loop_done: - add $len, $len, #8 - vld1.8 {@XMM[8]}, [$inp]! @ load input - veor @XMM[0], @XMM[8] - vst1.8 {@XMM[0]}, [$out]! @ write output - cmp $len, #2 - blo .Lctr_enc_done - vld1.8 {@XMM[9]}, [$inp]! - veor @XMM[1], @XMM[9] - vst1.8 {@XMM[1]}, [$out]! - beq .Lctr_enc_done - vld1.8 {@XMM[10]}, [$inp]! - veor @XMM[4], @XMM[10] - vst1.8 {@XMM[4]}, [$out]! - cmp $len, #4 - blo .Lctr_enc_done - vld1.8 {@XMM[11]}, [$inp]! - veor @XMM[6], @XMM[11] - vst1.8 {@XMM[6]}, [$out]! - beq .Lctr_enc_done - vld1.8 {@XMM[12]}, [$inp]! - veor @XMM[3], @XMM[12] - vst1.8 {@XMM[3]}, [$out]! - cmp $len, #6 - blo .Lctr_enc_done - vld1.8 {@XMM[13]}, [$inp]! - veor @XMM[7], @XMM[13] - vst1.8 {@XMM[7]}, [$out]! - beq .Lctr_enc_done - vld1.8 {@XMM[14]}, [$inp] - veor @XMM[2], @XMM[14] - vst1.8 {@XMM[2]}, [$out]! - -.Lctr_enc_done: - vmov.i32 q0, #0 - vmov.i32 q1, #0 -#ifndef BSAES_ASM_EXTENDED_KEY -.Lctr_enc_bzero: @ wipe key schedule [if any] - vstmia $keysched!, {q0-q1} - cmp $keysched, $fp - bne .Lctr_enc_bzero -#else - vstmia $keysched, {q0-q1} -#endif - - mov sp, $fp - add sp, #0x10 @ add sp,$fp,#0x10 is no good for thumb - VFP_ABI_POP - ldmia sp!, {r4-r10, pc} @ return - -.align 4 -.Lctr_enc_short: - ldr ip, [sp] @ ctr pointer is passed on stack - stmdb sp!, {r4-r8, lr} - - mov r4, $inp @ copy arguments - mov r5, $out - mov r6, $len - mov r7, $key - ldr r8, [ip, #12] @ load counter LSW - vld1.8 {@XMM[1]}, [ip] @ load whole counter value -#ifdef __ARMEL__ - rev r8, r8 -#endif - sub sp, sp, #0x10 - vst1.8 {@XMM[1]}, [sp,:64] @ copy counter value - sub sp, sp, #0x10 - -.Lctr_enc_short_loop: - add r0, sp, #0x10 @ input counter value - mov r1, sp @ output on the stack - mov r2, r7 @ key - - bl AES_encrypt - - vld1.8 {@XMM[0]}, [r4]! @ load input - vld1.8 {@XMM[1]}, [sp,:64] @ load encrypted counter - add r8, r8, #1 -#ifdef __ARMEL__ - rev r0, r8 - str r0, [sp, #0x1c] @ next counter value -#else - str r8, [sp, #0x1c] @ next counter value -#endif - veor @XMM[0],@XMM[0],@XMM[1] - vst1.8 {@XMM[0]}, [r5]! @ store output - subs r6, r6, #1 - bne .Lctr_enc_short_loop - - vmov.i32 q0, #0 - vmov.i32 q1, #0 - vstmia sp!, {q0-q1} - - ldmia sp!, {r4-r8, pc} -.size bsaes_ctr32_encrypt_blocks,.-bsaes_ctr32_encrypt_blocks -___ -} -{ -###################################################################### -# void bsaes_xts_[en|de]crypt(const char *inp,char *out,size_t len, -# const AES_KEY *key1, const AES_KEY *key2, -# const unsigned char iv[16]); -# -my ($inp,$out,$len,$key,$rounds,$magic,$fp)=(map("r$_",(7..10,1..3))); -my $const="r6"; # returned by _bsaes_key_convert -my $twmask=@XMM[5]; -my @T=@XMM[6..7]; - -$code.=<<___; -.globl bsaes_xts_encrypt -.type bsaes_xts_encrypt,%function -.align 4 -bsaes_xts_encrypt: - mov ip, sp - stmdb sp!, {r4-r10, lr} @ 0x20 - VFP_ABI_PUSH - mov r6, sp @ future $fp - - mov $inp, r0 - mov $out, r1 - mov $len, r2 - mov $key, r3 - - sub r0, sp, #0x10 @ 0x10 - bic r0, #0xf @ align at 16 bytes - mov sp, r0 - -#ifdef XTS_CHAIN_TWEAK - ldr r0, [ip] @ pointer to input tweak -#else - @ generate initial tweak - ldr r0, [ip, #4] @ iv[] - mov r1, sp - ldr r2, [ip, #0] @ key2 - bl AES_encrypt - mov r0,sp @ pointer to initial tweak -#endif - - ldr $rounds, [$key, #240] @ get # of rounds - mov $fp, r6 -#ifndef BSAES_ASM_EXTENDED_KEY - @ allocate the key schedule on the stack - sub r12, sp, $rounds, lsl#7 @ 128 bytes per inner round key - @ add r12, #`128-32` @ size of bit-sliced key schedule - sub r12, #`32+16` @ place for tweak[9] - - @ populate the key schedule - mov r4, $key @ pass key - mov r5, $rounds @ pass # of rounds - mov sp, r12 - add r12, #0x90 @ pass key schedule - bl _bsaes_key_convert - veor @XMM[7], @XMM[7], @XMM[15] @ fix up last round key - vstmia r12, {@XMM[7]} @ save last round key -#else - ldr r12, [$key, #244] - eors r12, #1 - beq 0f - - str r12, [$key, #244] - mov r4, $key @ pass key - mov r5, $rounds @ pass # of rounds - add r12, $key, #248 @ pass key schedule - bl _bsaes_key_convert - veor @XMM[7], @XMM[7], @XMM[15] @ fix up last round key - vstmia r12, {@XMM[7]} - -.align 2 -0: sub sp, #0x90 @ place for tweak[9] -#endif - - vld1.8 {@XMM[8]}, [r0] @ initial tweak - adr $magic, .Lxts_magic - - subs $len, #0x80 - blo .Lxts_enc_short - b .Lxts_enc_loop - -.align 4 -.Lxts_enc_loop: - vldmia $magic, {$twmask} @ load XTS magic - vshr.s64 @T[0], @XMM[8], #63 - mov r0, sp - vand @T[0], @T[0], $twmask -___ -for($i=9;$i<16;$i++) { -$code.=<<___; - vadd.u64 @XMM[$i], @XMM[$i-1], @XMM[$i-1] - vst1.64 {@XMM[$i-1]}, [r0,:128]! - vswp `&Dhi("@T[0]")`,`&Dlo("@T[0]")` - vshr.s64 @T[1], @XMM[$i], #63 - veor @XMM[$i], @XMM[$i], @T[0] - vand @T[1], @T[1], $twmask -___ - @T=reverse(@T); - -$code.=<<___ if ($i>=10); - vld1.8 {@XMM[$i-10]}, [$inp]! -___ -$code.=<<___ if ($i>=11); - veor @XMM[$i-11], @XMM[$i-11], @XMM[$i-3] -___ -} -$code.=<<___; - vadd.u64 @XMM[8], @XMM[15], @XMM[15] - vst1.64 {@XMM[15]}, [r0,:128]! - vswp `&Dhi("@T[0]")`,`&Dlo("@T[0]")` - veor @XMM[8], @XMM[8], @T[0] - vst1.64 {@XMM[8]}, [r0,:128] @ next round tweak - - vld1.8 {@XMM[6]-@XMM[7]}, [$inp]! - veor @XMM[5], @XMM[5], @XMM[13] -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, $key, #248 @ pass key schedule -#endif - veor @XMM[6], @XMM[6], @XMM[14] - mov r5, $rounds @ pass rounds - veor @XMM[7], @XMM[7], @XMM[15] - mov r0, sp - - bl _bsaes_encrypt8 - - vld1.64 {@XMM[ 8]-@XMM[ 9]}, [r0,:128]! - vld1.64 {@XMM[10]-@XMM[11]}, [r0,:128]! - veor @XMM[0], @XMM[0], @XMM[ 8] - vld1.64 {@XMM[12]-@XMM[13]}, [r0,:128]! - veor @XMM[1], @XMM[1], @XMM[ 9] - veor @XMM[8], @XMM[4], @XMM[10] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! - veor @XMM[9], @XMM[6], @XMM[11] - vld1.64 {@XMM[14]-@XMM[15]}, [r0,:128]! - veor @XMM[10], @XMM[3], @XMM[12] - vst1.8 {@XMM[8]-@XMM[9]}, [$out]! - veor @XMM[11], @XMM[7], @XMM[13] - veor @XMM[12], @XMM[2], @XMM[14] - vst1.8 {@XMM[10]-@XMM[11]}, [$out]! - veor @XMM[13], @XMM[5], @XMM[15] - vst1.8 {@XMM[12]-@XMM[13]}, [$out]! - - vld1.64 {@XMM[8]}, [r0,:128] @ next round tweak - - subs $len, #0x80 - bpl .Lxts_enc_loop - -.Lxts_enc_short: - adds $len, #0x70 - bmi .Lxts_enc_done - - vldmia $magic, {$twmask} @ load XTS magic - vshr.s64 @T[0], @XMM[8], #63 - mov r0, sp - vand @T[0], @T[0], $twmask -___ -for($i=9;$i<16;$i++) { -$code.=<<___; - vadd.u64 @XMM[$i], @XMM[$i-1], @XMM[$i-1] - vst1.64 {@XMM[$i-1]}, [r0,:128]! - vswp `&Dhi("@T[0]")`,`&Dlo("@T[0]")` - vshr.s64 @T[1], @XMM[$i], #63 - veor @XMM[$i], @XMM[$i], @T[0] - vand @T[1], @T[1], $twmask -___ - @T=reverse(@T); - -$code.=<<___ if ($i>=10); - vld1.8 {@XMM[$i-10]}, [$inp]! - subs $len, #0x10 - bmi .Lxts_enc_`$i-9` -___ -$code.=<<___ if ($i>=11); - veor @XMM[$i-11], @XMM[$i-11], @XMM[$i-3] -___ -} -$code.=<<___; - sub $len, #0x10 - vst1.64 {@XMM[15]}, [r0,:128] @ next round tweak - - vld1.8 {@XMM[6]}, [$inp]! - veor @XMM[5], @XMM[5], @XMM[13] -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, $key, #248 @ pass key schedule -#endif - veor @XMM[6], @XMM[6], @XMM[14] - mov r5, $rounds @ pass rounds - mov r0, sp - - bl _bsaes_encrypt8 - - vld1.64 {@XMM[ 8]-@XMM[ 9]}, [r0,:128]! - vld1.64 {@XMM[10]-@XMM[11]}, [r0,:128]! - veor @XMM[0], @XMM[0], @XMM[ 8] - vld1.64 {@XMM[12]-@XMM[13]}, [r0,:128]! - veor @XMM[1], @XMM[1], @XMM[ 9] - veor @XMM[8], @XMM[4], @XMM[10] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! - veor @XMM[9], @XMM[6], @XMM[11] - vld1.64 {@XMM[14]}, [r0,:128]! - veor @XMM[10], @XMM[3], @XMM[12] - vst1.8 {@XMM[8]-@XMM[9]}, [$out]! - veor @XMM[11], @XMM[7], @XMM[13] - veor @XMM[12], @XMM[2], @XMM[14] - vst1.8 {@XMM[10]-@XMM[11]}, [$out]! - vst1.8 {@XMM[12]}, [$out]! - - vld1.64 {@XMM[8]}, [r0,:128] @ next round tweak - b .Lxts_enc_done -.align 4 -.Lxts_enc_6: - vst1.64 {@XMM[14]}, [r0,:128] @ next round tweak - - veor @XMM[4], @XMM[4], @XMM[12] -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, $key, #248 @ pass key schedule -#endif - veor @XMM[5], @XMM[5], @XMM[13] - mov r5, $rounds @ pass rounds - mov r0, sp - - bl _bsaes_encrypt8 - - vld1.64 {@XMM[ 8]-@XMM[ 9]}, [r0,:128]! - vld1.64 {@XMM[10]-@XMM[11]}, [r0,:128]! - veor @XMM[0], @XMM[0], @XMM[ 8] - vld1.64 {@XMM[12]-@XMM[13]}, [r0,:128]! - veor @XMM[1], @XMM[1], @XMM[ 9] - veor @XMM[8], @XMM[4], @XMM[10] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! - veor @XMM[9], @XMM[6], @XMM[11] - veor @XMM[10], @XMM[3], @XMM[12] - vst1.8 {@XMM[8]-@XMM[9]}, [$out]! - veor @XMM[11], @XMM[7], @XMM[13] - vst1.8 {@XMM[10]-@XMM[11]}, [$out]! - - vld1.64 {@XMM[8]}, [r0,:128] @ next round tweak - b .Lxts_enc_done - -@ put this in range for both ARM and Thumb mode adr instructions -.align 5 -.Lxts_magic: - .quad 1, 0x87 - -.align 5 -.Lxts_enc_5: - vst1.64 {@XMM[13]}, [r0,:128] @ next round tweak - - veor @XMM[3], @XMM[3], @XMM[11] -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, $key, #248 @ pass key schedule -#endif - veor @XMM[4], @XMM[4], @XMM[12] - mov r5, $rounds @ pass rounds - mov r0, sp - - bl _bsaes_encrypt8 - - vld1.64 {@XMM[ 8]-@XMM[ 9]}, [r0,:128]! - vld1.64 {@XMM[10]-@XMM[11]}, [r0,:128]! - veor @XMM[0], @XMM[0], @XMM[ 8] - vld1.64 {@XMM[12]}, [r0,:128]! - veor @XMM[1], @XMM[1], @XMM[ 9] - veor @XMM[8], @XMM[4], @XMM[10] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! - veor @XMM[9], @XMM[6], @XMM[11] - veor @XMM[10], @XMM[3], @XMM[12] - vst1.8 {@XMM[8]-@XMM[9]}, [$out]! - vst1.8 {@XMM[10]}, [$out]! - - vld1.64 {@XMM[8]}, [r0,:128] @ next round tweak - b .Lxts_enc_done -.align 4 -.Lxts_enc_4: - vst1.64 {@XMM[12]}, [r0,:128] @ next round tweak - - veor @XMM[2], @XMM[2], @XMM[10] -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, $key, #248 @ pass key schedule -#endif - veor @XMM[3], @XMM[3], @XMM[11] - mov r5, $rounds @ pass rounds - mov r0, sp - - bl _bsaes_encrypt8 - - vld1.64 {@XMM[ 8]-@XMM[ 9]}, [r0,:128]! - vld1.64 {@XMM[10]-@XMM[11]}, [r0,:128]! - veor @XMM[0], @XMM[0], @XMM[ 8] - veor @XMM[1], @XMM[1], @XMM[ 9] - veor @XMM[8], @XMM[4], @XMM[10] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! - veor @XMM[9], @XMM[6], @XMM[11] - vst1.8 {@XMM[8]-@XMM[9]}, [$out]! - - vld1.64 {@XMM[8]}, [r0,:128] @ next round tweak - b .Lxts_enc_done -.align 4 -.Lxts_enc_3: - vst1.64 {@XMM[11]}, [r0,:128] @ next round tweak - - veor @XMM[1], @XMM[1], @XMM[9] -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, $key, #248 @ pass key schedule -#endif - veor @XMM[2], @XMM[2], @XMM[10] - mov r5, $rounds @ pass rounds - mov r0, sp - - bl _bsaes_encrypt8 - - vld1.64 {@XMM[8]-@XMM[9]}, [r0,:128]! - vld1.64 {@XMM[10]}, [r0,:128]! - veor @XMM[0], @XMM[0], @XMM[ 8] - veor @XMM[1], @XMM[1], @XMM[ 9] - veor @XMM[8], @XMM[4], @XMM[10] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! - vst1.8 {@XMM[8]}, [$out]! - - vld1.64 {@XMM[8]}, [r0,:128] @ next round tweak - b .Lxts_enc_done -.align 4 -.Lxts_enc_2: - vst1.64 {@XMM[10]}, [r0,:128] @ next round tweak - - veor @XMM[0], @XMM[0], @XMM[8] -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, $key, #248 @ pass key schedule -#endif - veor @XMM[1], @XMM[1], @XMM[9] - mov r5, $rounds @ pass rounds - mov r0, sp - - bl _bsaes_encrypt8 - - vld1.64 {@XMM[8]-@XMM[9]}, [r0,:128]! - veor @XMM[0], @XMM[0], @XMM[ 8] - veor @XMM[1], @XMM[1], @XMM[ 9] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! - - vld1.64 {@XMM[8]}, [r0,:128] @ next round tweak - b .Lxts_enc_done -.align 4 -.Lxts_enc_1: - mov r0, sp - veor @XMM[0], @XMM[8] - mov r1, sp - vst1.8 {@XMM[0]}, [sp,:128] - mov r2, $key - mov r4, $fp @ preserve fp - - bl AES_encrypt - - vld1.8 {@XMM[0]}, [sp,:128] - veor @XMM[0], @XMM[0], @XMM[8] - vst1.8 {@XMM[0]}, [$out]! - mov $fp, r4 - - vmov @XMM[8], @XMM[9] @ next round tweak - -.Lxts_enc_done: -#ifndef XTS_CHAIN_TWEAK - adds $len, #0x10 - beq .Lxts_enc_ret - sub r6, $out, #0x10 - -.Lxts_enc_steal: - ldrb r0, [$inp], #1 - ldrb r1, [$out, #-0x10] - strb r0, [$out, #-0x10] - strb r1, [$out], #1 - - subs $len, #1 - bhi .Lxts_enc_steal - - vld1.8 {@XMM[0]}, [r6] - mov r0, sp - veor @XMM[0], @XMM[0], @XMM[8] - mov r1, sp - vst1.8 {@XMM[0]}, [sp,:128] - mov r2, $key - mov r4, $fp @ preserve fp - - bl AES_encrypt - - vld1.8 {@XMM[0]}, [sp,:128] - veor @XMM[0], @XMM[0], @XMM[8] - vst1.8 {@XMM[0]}, [r6] - mov $fp, r4 -#endif - -.Lxts_enc_ret: - bic r0, $fp, #0xf - vmov.i32 q0, #0 - vmov.i32 q1, #0 -#ifdef XTS_CHAIN_TWEAK - ldr r1, [$fp, #0x20+VFP_ABI_FRAME] @ chain tweak -#endif -.Lxts_enc_bzero: @ wipe key schedule [if any] - vstmia sp!, {q0-q1} - cmp sp, r0 - bne .Lxts_enc_bzero - - mov sp, $fp -#ifdef XTS_CHAIN_TWEAK - vst1.8 {@XMM[8]}, [r1] -#endif - VFP_ABI_POP - ldmia sp!, {r4-r10, pc} @ return - -.size bsaes_xts_encrypt,.-bsaes_xts_encrypt - -.globl bsaes_xts_decrypt -.type bsaes_xts_decrypt,%function -.align 4 -bsaes_xts_decrypt: - mov ip, sp - stmdb sp!, {r4-r10, lr} @ 0x20 - VFP_ABI_PUSH - mov r6, sp @ future $fp - - mov $inp, r0 - mov $out, r1 - mov $len, r2 - mov $key, r3 - - sub r0, sp, #0x10 @ 0x10 - bic r0, #0xf @ align at 16 bytes - mov sp, r0 - -#ifdef XTS_CHAIN_TWEAK - ldr r0, [ip] @ pointer to input tweak -#else - @ generate initial tweak - ldr r0, [ip, #4] @ iv[] - mov r1, sp - ldr r2, [ip, #0] @ key2 - bl AES_encrypt - mov r0, sp @ pointer to initial tweak -#endif - - ldr $rounds, [$key, #240] @ get # of rounds - mov $fp, r6 -#ifndef BSAES_ASM_EXTENDED_KEY - @ allocate the key schedule on the stack - sub r12, sp, $rounds, lsl#7 @ 128 bytes per inner round key - @ add r12, #`128-32` @ size of bit-sliced key schedule - sub r12, #`32+16` @ place for tweak[9] - - @ populate the key schedule - mov r4, $key @ pass key - mov r5, $rounds @ pass # of rounds - mov sp, r12 - add r12, #0x90 @ pass key schedule - bl _bsaes_key_convert - add r4, sp, #0x90 - vldmia r4, {@XMM[6]} - vstmia r12, {@XMM[15]} @ save last round key - veor @XMM[7], @XMM[7], @XMM[6] @ fix up round 0 key - vstmia r4, {@XMM[7]} -#else - ldr r12, [$key, #244] - eors r12, #1 - beq 0f - - str r12, [$key, #244] - mov r4, $key @ pass key - mov r5, $rounds @ pass # of rounds - add r12, $key, #248 @ pass key schedule - bl _bsaes_key_convert - add r4, $key, #248 - vldmia r4, {@XMM[6]} - vstmia r12, {@XMM[15]} @ save last round key - veor @XMM[7], @XMM[7], @XMM[6] @ fix up round 0 key - vstmia r4, {@XMM[7]} - -.align 2 -0: sub sp, #0x90 @ place for tweak[9] -#endif - vld1.8 {@XMM[8]}, [r0] @ initial tweak - adr $magic, .Lxts_magic - -#ifndef XTS_CHAIN_TWEAK - tst $len, #0xf @ if not multiple of 16 - it ne @ Thumb2 thing, sanity check in ARM - subne $len, #0x10 @ subtract another 16 bytes -#endif - subs $len, #0x80 - - blo .Lxts_dec_short - b .Lxts_dec_loop - -.align 4 -.Lxts_dec_loop: - vldmia $magic, {$twmask} @ load XTS magic - vshr.s64 @T[0], @XMM[8], #63 - mov r0, sp - vand @T[0], @T[0], $twmask -___ -for($i=9;$i<16;$i++) { -$code.=<<___; - vadd.u64 @XMM[$i], @XMM[$i-1], @XMM[$i-1] - vst1.64 {@XMM[$i-1]}, [r0,:128]! - vswp `&Dhi("@T[0]")`,`&Dlo("@T[0]")` - vshr.s64 @T[1], @XMM[$i], #63 - veor @XMM[$i], @XMM[$i], @T[0] - vand @T[1], @T[1], $twmask -___ - @T=reverse(@T); - -$code.=<<___ if ($i>=10); - vld1.8 {@XMM[$i-10]}, [$inp]! -___ -$code.=<<___ if ($i>=11); - veor @XMM[$i-11], @XMM[$i-11], @XMM[$i-3] -___ -} -$code.=<<___; - vadd.u64 @XMM[8], @XMM[15], @XMM[15] - vst1.64 {@XMM[15]}, [r0,:128]! - vswp `&Dhi("@T[0]")`,`&Dlo("@T[0]")` - veor @XMM[8], @XMM[8], @T[0] - vst1.64 {@XMM[8]}, [r0,:128] @ next round tweak - - vld1.8 {@XMM[6]-@XMM[7]}, [$inp]! - veor @XMM[5], @XMM[5], @XMM[13] -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, $key, #248 @ pass key schedule -#endif - veor @XMM[6], @XMM[6], @XMM[14] - mov r5, $rounds @ pass rounds - veor @XMM[7], @XMM[7], @XMM[15] - mov r0, sp - - bl _bsaes_decrypt8 - - vld1.64 {@XMM[ 8]-@XMM[ 9]}, [r0,:128]! - vld1.64 {@XMM[10]-@XMM[11]}, [r0,:128]! - veor @XMM[0], @XMM[0], @XMM[ 8] - vld1.64 {@XMM[12]-@XMM[13]}, [r0,:128]! - veor @XMM[1], @XMM[1], @XMM[ 9] - veor @XMM[8], @XMM[6], @XMM[10] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! - veor @XMM[9], @XMM[4], @XMM[11] - vld1.64 {@XMM[14]-@XMM[15]}, [r0,:128]! - veor @XMM[10], @XMM[2], @XMM[12] - vst1.8 {@XMM[8]-@XMM[9]}, [$out]! - veor @XMM[11], @XMM[7], @XMM[13] - veor @XMM[12], @XMM[3], @XMM[14] - vst1.8 {@XMM[10]-@XMM[11]}, [$out]! - veor @XMM[13], @XMM[5], @XMM[15] - vst1.8 {@XMM[12]-@XMM[13]}, [$out]! - - vld1.64 {@XMM[8]}, [r0,:128] @ next round tweak - - subs $len, #0x80 - bpl .Lxts_dec_loop - -.Lxts_dec_short: - adds $len, #0x70 - bmi .Lxts_dec_done - - vldmia $magic, {$twmask} @ load XTS magic - vshr.s64 @T[0], @XMM[8], #63 - mov r0, sp - vand @T[0], @T[0], $twmask -___ -for($i=9;$i<16;$i++) { -$code.=<<___; - vadd.u64 @XMM[$i], @XMM[$i-1], @XMM[$i-1] - vst1.64 {@XMM[$i-1]}, [r0,:128]! - vswp `&Dhi("@T[0]")`,`&Dlo("@T[0]")` - vshr.s64 @T[1], @XMM[$i], #63 - veor @XMM[$i], @XMM[$i], @T[0] - vand @T[1], @T[1], $twmask -___ - @T=reverse(@T); - -$code.=<<___ if ($i>=10); - vld1.8 {@XMM[$i-10]}, [$inp]! - subs $len, #0x10 - bmi .Lxts_dec_`$i-9` -___ -$code.=<<___ if ($i>=11); - veor @XMM[$i-11], @XMM[$i-11], @XMM[$i-3] -___ -} -$code.=<<___; - sub $len, #0x10 - vst1.64 {@XMM[15]}, [r0,:128] @ next round tweak - - vld1.8 {@XMM[6]}, [$inp]! - veor @XMM[5], @XMM[5], @XMM[13] -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, $key, #248 @ pass key schedule -#endif - veor @XMM[6], @XMM[6], @XMM[14] - mov r5, $rounds @ pass rounds - mov r0, sp - - bl _bsaes_decrypt8 - - vld1.64 {@XMM[ 8]-@XMM[ 9]}, [r0,:128]! - vld1.64 {@XMM[10]-@XMM[11]}, [r0,:128]! - veor @XMM[0], @XMM[0], @XMM[ 8] - vld1.64 {@XMM[12]-@XMM[13]}, [r0,:128]! - veor @XMM[1], @XMM[1], @XMM[ 9] - veor @XMM[8], @XMM[6], @XMM[10] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! - veor @XMM[9], @XMM[4], @XMM[11] - vld1.64 {@XMM[14]}, [r0,:128]! - veor @XMM[10], @XMM[2], @XMM[12] - vst1.8 {@XMM[8]-@XMM[9]}, [$out]! - veor @XMM[11], @XMM[7], @XMM[13] - veor @XMM[12], @XMM[3], @XMM[14] - vst1.8 {@XMM[10]-@XMM[11]}, [$out]! - vst1.8 {@XMM[12]}, [$out]! - - vld1.64 {@XMM[8]}, [r0,:128] @ next round tweak - b .Lxts_dec_done -.align 4 -.Lxts_dec_6: - vst1.64 {@XMM[14]}, [r0,:128] @ next round tweak - - veor @XMM[4], @XMM[4], @XMM[12] -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, $key, #248 @ pass key schedule -#endif - veor @XMM[5], @XMM[5], @XMM[13] - mov r5, $rounds @ pass rounds - mov r0, sp - - bl _bsaes_decrypt8 - - vld1.64 {@XMM[ 8]-@XMM[ 9]}, [r0,:128]! - vld1.64 {@XMM[10]-@XMM[11]}, [r0,:128]! - veor @XMM[0], @XMM[0], @XMM[ 8] - vld1.64 {@XMM[12]-@XMM[13]}, [r0,:128]! - veor @XMM[1], @XMM[1], @XMM[ 9] - veor @XMM[8], @XMM[6], @XMM[10] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! - veor @XMM[9], @XMM[4], @XMM[11] - veor @XMM[10], @XMM[2], @XMM[12] - vst1.8 {@XMM[8]-@XMM[9]}, [$out]! - veor @XMM[11], @XMM[7], @XMM[13] - vst1.8 {@XMM[10]-@XMM[11]}, [$out]! - - vld1.64 {@XMM[8]}, [r0,:128] @ next round tweak - b .Lxts_dec_done -.align 4 -.Lxts_dec_5: - vst1.64 {@XMM[13]}, [r0,:128] @ next round tweak - - veor @XMM[3], @XMM[3], @XMM[11] -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, $key, #248 @ pass key schedule -#endif - veor @XMM[4], @XMM[4], @XMM[12] - mov r5, $rounds @ pass rounds - mov r0, sp - - bl _bsaes_decrypt8 - - vld1.64 {@XMM[ 8]-@XMM[ 9]}, [r0,:128]! - vld1.64 {@XMM[10]-@XMM[11]}, [r0,:128]! - veor @XMM[0], @XMM[0], @XMM[ 8] - vld1.64 {@XMM[12]}, [r0,:128]! - veor @XMM[1], @XMM[1], @XMM[ 9] - veor @XMM[8], @XMM[6], @XMM[10] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! - veor @XMM[9], @XMM[4], @XMM[11] - veor @XMM[10], @XMM[2], @XMM[12] - vst1.8 {@XMM[8]-@XMM[9]}, [$out]! - vst1.8 {@XMM[10]}, [$out]! - - vld1.64 {@XMM[8]}, [r0,:128] @ next round tweak - b .Lxts_dec_done -.align 4 -.Lxts_dec_4: - vst1.64 {@XMM[12]}, [r0,:128] @ next round tweak - - veor @XMM[2], @XMM[2], @XMM[10] -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, $key, #248 @ pass key schedule -#endif - veor @XMM[3], @XMM[3], @XMM[11] - mov r5, $rounds @ pass rounds - mov r0, sp - - bl _bsaes_decrypt8 - - vld1.64 {@XMM[ 8]-@XMM[ 9]}, [r0,:128]! - vld1.64 {@XMM[10]-@XMM[11]}, [r0,:128]! - veor @XMM[0], @XMM[0], @XMM[ 8] - veor @XMM[1], @XMM[1], @XMM[ 9] - veor @XMM[8], @XMM[6], @XMM[10] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! - veor @XMM[9], @XMM[4], @XMM[11] - vst1.8 {@XMM[8]-@XMM[9]}, [$out]! - - vld1.64 {@XMM[8]}, [r0,:128] @ next round tweak - b .Lxts_dec_done -.align 4 -.Lxts_dec_3: - vst1.64 {@XMM[11]}, [r0,:128] @ next round tweak - - veor @XMM[1], @XMM[1], @XMM[9] -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, $key, #248 @ pass key schedule -#endif - veor @XMM[2], @XMM[2], @XMM[10] - mov r5, $rounds @ pass rounds - mov r0, sp - - bl _bsaes_decrypt8 - - vld1.64 {@XMM[8]-@XMM[9]}, [r0,:128]! - vld1.64 {@XMM[10]}, [r0,:128]! - veor @XMM[0], @XMM[0], @XMM[ 8] - veor @XMM[1], @XMM[1], @XMM[ 9] - veor @XMM[8], @XMM[6], @XMM[10] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! - vst1.8 {@XMM[8]}, [$out]! - - vld1.64 {@XMM[8]}, [r0,:128] @ next round tweak - b .Lxts_dec_done -.align 4 -.Lxts_dec_2: - vst1.64 {@XMM[10]}, [r0,:128] @ next round tweak - - veor @XMM[0], @XMM[0], @XMM[8] -#ifndef BSAES_ASM_EXTENDED_KEY - add r4, sp, #0x90 @ pass key schedule -#else - add r4, $key, #248 @ pass key schedule -#endif - veor @XMM[1], @XMM[1], @XMM[9] - mov r5, $rounds @ pass rounds - mov r0, sp - - bl _bsaes_decrypt8 - - vld1.64 {@XMM[8]-@XMM[9]}, [r0,:128]! - veor @XMM[0], @XMM[0], @XMM[ 8] - veor @XMM[1], @XMM[1], @XMM[ 9] - vst1.8 {@XMM[0]-@XMM[1]}, [$out]! - - vld1.64 {@XMM[8]}, [r0,:128] @ next round tweak - b .Lxts_dec_done -.align 4 -.Lxts_dec_1: - mov r0, sp - veor @XMM[0], @XMM[8] - mov r1, sp - vst1.8 {@XMM[0]}, [sp,:128] - mov r2, $key - mov r4, $fp @ preserve fp - mov r5, $magic @ preserve magic - - bl AES_decrypt - - vld1.8 {@XMM[0]}, [sp,:128] - veor @XMM[0], @XMM[0], @XMM[8] - vst1.8 {@XMM[0]}, [$out]! - mov $fp, r4 - mov $magic, r5 - - vmov @XMM[8], @XMM[9] @ next round tweak - -.Lxts_dec_done: -#ifndef XTS_CHAIN_TWEAK - adds $len, #0x10 - beq .Lxts_dec_ret - - @ calculate one round of extra tweak for the stolen ciphertext - vldmia $magic, {$twmask} - vshr.s64 @XMM[6], @XMM[8], #63 - vand @XMM[6], @XMM[6], $twmask - vadd.u64 @XMM[9], @XMM[8], @XMM[8] - vswp `&Dhi("@XMM[6]")`,`&Dlo("@XMM[6]")` - veor @XMM[9], @XMM[9], @XMM[6] - - @ perform the final decryption with the last tweak value - vld1.8 {@XMM[0]}, [$inp]! - mov r0, sp - veor @XMM[0], @XMM[0], @XMM[9] - mov r1, sp - vst1.8 {@XMM[0]}, [sp,:128] - mov r2, $key - mov r4, $fp @ preserve fp - - bl AES_decrypt - - vld1.8 {@XMM[0]}, [sp,:128] - veor @XMM[0], @XMM[0], @XMM[9] - vst1.8 {@XMM[0]}, [$out] - - mov r6, $out -.Lxts_dec_steal: - ldrb r1, [$out] - ldrb r0, [$inp], #1 - strb r1, [$out, #0x10] - strb r0, [$out], #1 - - subs $len, #1 - bhi .Lxts_dec_steal - - vld1.8 {@XMM[0]}, [r6] - mov r0, sp - veor @XMM[0], @XMM[8] - mov r1, sp - vst1.8 {@XMM[0]}, [sp,:128] - mov r2, $key - - bl AES_decrypt - - vld1.8 {@XMM[0]}, [sp,:128] - veor @XMM[0], @XMM[0], @XMM[8] - vst1.8 {@XMM[0]}, [r6] - mov $fp, r4 -#endif - -.Lxts_dec_ret: - bic r0, $fp, #0xf - vmov.i32 q0, #0 - vmov.i32 q1, #0 -#ifdef XTS_CHAIN_TWEAK - ldr r1, [$fp, #0x20+VFP_ABI_FRAME] @ chain tweak -#endif -.Lxts_dec_bzero: @ wipe key schedule [if any] - vstmia sp!, {q0-q1} - cmp sp, r0 - bne .Lxts_dec_bzero - - mov sp, $fp -#ifdef XTS_CHAIN_TWEAK - vst1.8 {@XMM[8]}, [r1] -#endif - VFP_ABI_POP - ldmia sp!, {r4-r10, pc} @ return - -.size bsaes_xts_decrypt,.-bsaes_xts_decrypt -___ -} -$code.=<<___; -#endif -___ - -$code =~ s/\`([^\`]*)\`/eval($1)/gem; - -open SELF,$0; -while(<SELF>) { - next if (/^#!/); - last if (!s/^#/@/ and !/^$/); - print; -} -close SELF; - -print $code; - -close STDOUT; diff --git a/arch/arm/crypto/chacha20-neon-core.S b/arch/arm/crypto/chacha20-neon-core.S new file mode 100644 index 000000000000..3fecb2124c35 --- /dev/null +++ b/arch/arm/crypto/chacha20-neon-core.S @@ -0,0 +1,523 @@ +/* + * ChaCha20 256-bit cipher algorithm, RFC7539, ARM NEON functions + * + * Copyright (C) 2016 Linaro, Ltd. <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Based on: + * ChaCha20 256-bit cipher algorithm, RFC7539, x64 SSE3 functions + * + * Copyright (C) 2015 Martin Willi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/linkage.h> + + .text + .fpu neon + .align 5 + +ENTRY(chacha20_block_xor_neon) + // r0: Input state matrix, s + // r1: 1 data block output, o + // r2: 1 data block input, i + + // + // This function encrypts one ChaCha20 block by loading the state matrix + // in four NEON registers. It performs matrix operation on four words in + // parallel, but requireds shuffling to rearrange the words after each + // round. + // + + // x0..3 = s0..3 + add ip, r0, #0x20 + vld1.32 {q0-q1}, [r0] + vld1.32 {q2-q3}, [ip] + + vmov q8, q0 + vmov q9, q1 + vmov q10, q2 + vmov q11, q3 + + mov r3, #10 + +.Ldoubleround: + // x0 += x1, x3 = rotl32(x3 ^ x0, 16) + vadd.i32 q0, q0, q1 + veor q4, q3, q0 + vshl.u32 q3, q4, #16 + vsri.u32 q3, q4, #16 + + // x2 += x3, x1 = rotl32(x1 ^ x2, 12) + vadd.i32 q2, q2, q3 + veor q4, q1, q2 + vshl.u32 q1, q4, #12 + vsri.u32 q1, q4, #20 + + // x0 += x1, x3 = rotl32(x3 ^ x0, 8) + vadd.i32 q0, q0, q1 + veor q4, q3, q0 + vshl.u32 q3, q4, #8 + vsri.u32 q3, q4, #24 + + // x2 += x3, x1 = rotl32(x1 ^ x2, 7) + vadd.i32 q2, q2, q3 + veor q4, q1, q2 + vshl.u32 q1, q4, #7 + vsri.u32 q1, q4, #25 + + // x1 = shuffle32(x1, MASK(0, 3, 2, 1)) + vext.8 q1, q1, q1, #4 + // x2 = shuffle32(x2, MASK(1, 0, 3, 2)) + vext.8 q2, q2, q2, #8 + // x3 = shuffle32(x3, MASK(2, 1, 0, 3)) + vext.8 q3, q3, q3, #12 + + // x0 += x1, x3 = rotl32(x3 ^ x0, 16) + vadd.i32 q0, q0, q1 + veor q4, q3, q0 + vshl.u32 q3, q4, #16 + vsri.u32 q3, q4, #16 + + // x2 += x3, x1 = rotl32(x1 ^ x2, 12) + vadd.i32 q2, q2, q3 + veor q4, q1, q2 + vshl.u32 q1, q4, #12 + vsri.u32 q1, q4, #20 + + // x0 += x1, x3 = rotl32(x3 ^ x0, 8) + vadd.i32 q0, q0, q1 + veor q4, q3, q0 + vshl.u32 q3, q4, #8 + vsri.u32 q3, q4, #24 + + // x2 += x3, x1 = rotl32(x1 ^ x2, 7) + vadd.i32 q2, q2, q3 + veor q4, q1, q2 + vshl.u32 q1, q4, #7 + vsri.u32 q1, q4, #25 + + // x1 = shuffle32(x1, MASK(2, 1, 0, 3)) + vext.8 q1, q1, q1, #12 + // x2 = shuffle32(x2, MASK(1, 0, 3, 2)) + vext.8 q2, q2, q2, #8 + // x3 = shuffle32(x3, MASK(0, 3, 2, 1)) + vext.8 q3, q3, q3, #4 + + subs r3, r3, #1 + bne .Ldoubleround + + add ip, r2, #0x20 + vld1.8 {q4-q5}, [r2] + vld1.8 {q6-q7}, [ip] + + // o0 = i0 ^ (x0 + s0) + vadd.i32 q0, q0, q8 + veor q0, q0, q4 + + // o1 = i1 ^ (x1 + s1) + vadd.i32 q1, q1, q9 + veor q1, q1, q5 + + // o2 = i2 ^ (x2 + s2) + vadd.i32 q2, q2, q10 + veor q2, q2, q6 + + // o3 = i3 ^ (x3 + s3) + vadd.i32 q3, q3, q11 + veor q3, q3, q7 + + add ip, r1, #0x20 + vst1.8 {q0-q1}, [r1] + vst1.8 {q2-q3}, [ip] + + bx lr +ENDPROC(chacha20_block_xor_neon) + + .align 5 +ENTRY(chacha20_4block_xor_neon) + push {r4-r6, lr} + mov ip, sp // preserve the stack pointer + sub r3, sp, #0x20 // allocate a 32 byte buffer + bic r3, r3, #0x1f // aligned to 32 bytes + mov sp, r3 + + // r0: Input state matrix, s + // r1: 4 data blocks output, o + // r2: 4 data blocks input, i + + // + // This function encrypts four consecutive ChaCha20 blocks by loading + // the state matrix in NEON registers four times. The algorithm performs + // each operation on the corresponding word of each state matrix, hence + // requires no word shuffling. For final XORing step we transpose the + // matrix by interleaving 32- and then 64-bit words, which allows us to + // do XOR in NEON registers. + // + + // x0..15[0-3] = s0..3[0..3] + add r3, r0, #0x20 + vld1.32 {q0-q1}, [r0] + vld1.32 {q2-q3}, [r3] + + adr r3, CTRINC + vdup.32 q15, d7[1] + vdup.32 q14, d7[0] + vld1.32 {q11}, [r3, :128] + vdup.32 q13, d6[1] + vdup.32 q12, d6[0] + vadd.i32 q12, q12, q11 // x12 += counter values 0-3 + vdup.32 q11, d5[1] + vdup.32 q10, d5[0] + vdup.32 q9, d4[1] + vdup.32 q8, d4[0] + vdup.32 q7, d3[1] + vdup.32 q6, d3[0] + vdup.32 q5, d2[1] + vdup.32 q4, d2[0] + vdup.32 q3, d1[1] + vdup.32 q2, d1[0] + vdup.32 q1, d0[1] + vdup.32 q0, d0[0] + + mov r3, #10 + +.Ldoubleround4: + // x0 += x4, x12 = rotl32(x12 ^ x0, 16) + // x1 += x5, x13 = rotl32(x13 ^ x1, 16) + // x2 += x6, x14 = rotl32(x14 ^ x2, 16) + // x3 += x7, x15 = rotl32(x15 ^ x3, 16) + vadd.i32 q0, q0, q4 + vadd.i32 q1, q1, q5 + vadd.i32 q2, q2, q6 + vadd.i32 q3, q3, q7 + + veor q12, q12, q0 + veor q13, q13, q1 + veor q14, q14, q2 + veor q15, q15, q3 + + vrev32.16 q12, q12 + vrev32.16 q13, q13 + vrev32.16 q14, q14 + vrev32.16 q15, q15 + + // x8 += x12, x4 = rotl32(x4 ^ x8, 12) + // x9 += x13, x5 = rotl32(x5 ^ x9, 12) + // x10 += x14, x6 = rotl32(x6 ^ x10, 12) + // x11 += x15, x7 = rotl32(x7 ^ x11, 12) + vadd.i32 q8, q8, q12 + vadd.i32 q9, q9, q13 + vadd.i32 q10, q10, q14 + vadd.i32 q11, q11, q15 + + vst1.32 {q8-q9}, [sp, :256] + + veor q8, q4, q8 + veor q9, q5, q9 + vshl.u32 q4, q8, #12 + vshl.u32 q5, q9, #12 + vsri.u32 q4, q8, #20 + vsri.u32 q5, q9, #20 + + veor q8, q6, q10 + veor q9, q7, q11 + vshl.u32 q6, q8, #12 + vshl.u32 q7, q9, #12 + vsri.u32 q6, q8, #20 + vsri.u32 q7, q9, #20 + + // x0 += x4, x12 = rotl32(x12 ^ x0, 8) + // x1 += x5, x13 = rotl32(x13 ^ x1, 8) + // x2 += x6, x14 = rotl32(x14 ^ x2, 8) + // x3 += x7, x15 = rotl32(x15 ^ x3, 8) + vadd.i32 q0, q0, q4 + vadd.i32 q1, q1, q5 + vadd.i32 q2, q2, q6 + vadd.i32 q3, q3, q7 + + veor q8, q12, q0 + veor q9, q13, q1 + vshl.u32 q12, q8, #8 + vshl.u32 q13, q9, #8 + vsri.u32 q12, q8, #24 + vsri.u32 q13, q9, #24 + + veor q8, q14, q2 + veor q9, q15, q3 + vshl.u32 q14, q8, #8 + vshl.u32 q15, q9, #8 + vsri.u32 q14, q8, #24 + vsri.u32 q15, q9, #24 + + vld1.32 {q8-q9}, [sp, :256] + + // x8 += x12, x4 = rotl32(x4 ^ x8, 7) + // x9 += x13, x5 = rotl32(x5 ^ x9, 7) + // x10 += x14, x6 = rotl32(x6 ^ x10, 7) + // x11 += x15, x7 = rotl32(x7 ^ x11, 7) + vadd.i32 q8, q8, q12 + vadd.i32 q9, q9, q13 + vadd.i32 q10, q10, q14 + vadd.i32 q11, q11, q15 + + vst1.32 {q8-q9}, [sp, :256] + + veor q8, q4, q8 + veor q9, q5, q9 + vshl.u32 q4, q8, #7 + vshl.u32 q5, q9, #7 + vsri.u32 q4, q8, #25 + vsri.u32 q5, q9, #25 + + veor q8, q6, q10 + veor q9, q7, q11 + vshl.u32 q6, q8, #7 + vshl.u32 q7, q9, #7 + vsri.u32 q6, q8, #25 + vsri.u32 q7, q9, #25 + + vld1.32 {q8-q9}, [sp, :256] + + // x0 += x5, x15 = rotl32(x15 ^ x0, 16) + // x1 += x6, x12 = rotl32(x12 ^ x1, 16) + // x2 += x7, x13 = rotl32(x13 ^ x2, 16) + // x3 += x4, x14 = rotl32(x14 ^ x3, 16) + vadd.i32 q0, q0, q5 + vadd.i32 q1, q1, q6 + vadd.i32 q2, q2, q7 + vadd.i32 q3, q3, q4 + + veor q15, q15, q0 + veor q12, q12, q1 + veor q13, q13, q2 + veor q14, q14, q3 + + vrev32.16 q15, q15 + vrev32.16 q12, q12 + vrev32.16 q13, q13 + vrev32.16 q14, q14 + + // x10 += x15, x5 = rotl32(x5 ^ x10, 12) + // x11 += x12, x6 = rotl32(x6 ^ x11, 12) + // x8 += x13, x7 = rotl32(x7 ^ x8, 12) + // x9 += x14, x4 = rotl32(x4 ^ x9, 12) + vadd.i32 q10, q10, q15 + vadd.i32 q11, q11, q12 + vadd.i32 q8, q8, q13 + vadd.i32 q9, q9, q14 + + vst1.32 {q8-q9}, [sp, :256] + + veor q8, q7, q8 + veor q9, q4, q9 + vshl.u32 q7, q8, #12 + vshl.u32 q4, q9, #12 + vsri.u32 q7, q8, #20 + vsri.u32 q4, q9, #20 + + veor q8, q5, q10 + veor q9, q6, q11 + vshl.u32 q5, q8, #12 + vshl.u32 q6, q9, #12 + vsri.u32 q5, q8, #20 + vsri.u32 q6, q9, #20 + + // x0 += x5, x15 = rotl32(x15 ^ x0, 8) + // x1 += x6, x12 = rotl32(x12 ^ x1, 8) + // x2 += x7, x13 = rotl32(x13 ^ x2, 8) + // x3 += x4, x14 = rotl32(x14 ^ x3, 8) + vadd.i32 q0, q0, q5 + vadd.i32 q1, q1, q6 + vadd.i32 q2, q2, q7 + vadd.i32 q3, q3, q4 + + veor q8, q15, q0 + veor q9, q12, q1 + vshl.u32 q15, q8, #8 + vshl.u32 q12, q9, #8 + vsri.u32 q15, q8, #24 + vsri.u32 q12, q9, #24 + + veor q8, q13, q2 + veor q9, q14, q3 + vshl.u32 q13, q8, #8 + vshl.u32 q14, q9, #8 + vsri.u32 q13, q8, #24 + vsri.u32 q14, q9, #24 + + vld1.32 {q8-q9}, [sp, :256] + + // x10 += x15, x5 = rotl32(x5 ^ x10, 7) + // x11 += x12, x6 = rotl32(x6 ^ x11, 7) + // x8 += x13, x7 = rotl32(x7 ^ x8, 7) + // x9 += x14, x4 = rotl32(x4 ^ x9, 7) + vadd.i32 q10, q10, q15 + vadd.i32 q11, q11, q12 + vadd.i32 q8, q8, q13 + vadd.i32 q9, q9, q14 + + vst1.32 {q8-q9}, [sp, :256] + + veor q8, q7, q8 + veor q9, q4, q9 + vshl.u32 q7, q8, #7 + vshl.u32 q4, q9, #7 + vsri.u32 q7, q8, #25 + vsri.u32 q4, q9, #25 + + veor q8, q5, q10 + veor q9, q6, q11 + vshl.u32 q5, q8, #7 + vshl.u32 q6, q9, #7 + vsri.u32 q5, q8, #25 + vsri.u32 q6, q9, #25 + + subs r3, r3, #1 + beq 0f + + vld1.32 {q8-q9}, [sp, :256] + b .Ldoubleround4 + + // x0[0-3] += s0[0] + // x1[0-3] += s0[1] + // x2[0-3] += s0[2] + // x3[0-3] += s0[3] +0: ldmia r0!, {r3-r6} + vdup.32 q8, r3 + vdup.32 q9, r4 + vadd.i32 q0, q0, q8 + vadd.i32 q1, q1, q9 + vdup.32 q8, r5 + vdup.32 q9, r6 + vadd.i32 q2, q2, q8 + vadd.i32 q3, q3, q9 + + // x4[0-3] += s1[0] + // x5[0-3] += s1[1] + // x6[0-3] += s1[2] + // x7[0-3] += s1[3] + ldmia r0!, {r3-r6} + vdup.32 q8, r3 + vdup.32 q9, r4 + vadd.i32 q4, q4, q8 + vadd.i32 q5, q5, q9 + vdup.32 q8, r5 + vdup.32 q9, r6 + vadd.i32 q6, q6, q8 + vadd.i32 q7, q7, q9 + + // interleave 32-bit words in state n, n+1 + vzip.32 q0, q1 + vzip.32 q2, q3 + vzip.32 q4, q5 + vzip.32 q6, q7 + + // interleave 64-bit words in state n, n+2 + vswp d1, d4 + vswp d3, d6 + vswp d9, d12 + vswp d11, d14 + + // xor with corresponding input, write to output + vld1.8 {q8-q9}, [r2]! + veor q8, q8, q0 + veor q9, q9, q4 + vst1.8 {q8-q9}, [r1]! + + vld1.32 {q8-q9}, [sp, :256] + + // x8[0-3] += s2[0] + // x9[0-3] += s2[1] + // x10[0-3] += s2[2] + // x11[0-3] += s2[3] + ldmia r0!, {r3-r6} + vdup.32 q0, r3 + vdup.32 q4, r4 + vadd.i32 q8, q8, q0 + vadd.i32 q9, q9, q4 + vdup.32 q0, r5 + vdup.32 q4, r6 + vadd.i32 q10, q10, q0 + vadd.i32 q11, q11, q4 + + // x12[0-3] += s3[0] + // x13[0-3] += s3[1] + // x14[0-3] += s3[2] + // x15[0-3] += s3[3] + ldmia r0!, {r3-r6} + vdup.32 q0, r3 + vdup.32 q4, r4 + adr r3, CTRINC + vadd.i32 q12, q12, q0 + vld1.32 {q0}, [r3, :128] + vadd.i32 q13, q13, q4 + vadd.i32 q12, q12, q0 // x12 += counter values 0-3 + + vdup.32 q0, r5 + vdup.32 q4, r6 + vadd.i32 q14, q14, q0 + vadd.i32 q15, q15, q4 + + // interleave 32-bit words in state n, n+1 + vzip.32 q8, q9 + vzip.32 q10, q11 + vzip.32 q12, q13 + vzip.32 q14, q15 + + // interleave 64-bit words in state n, n+2 + vswp d17, d20 + vswp d19, d22 + vswp d25, d28 + vswp d27, d30 + + vmov q4, q1 + + vld1.8 {q0-q1}, [r2]! + veor q0, q0, q8 + veor q1, q1, q12 + vst1.8 {q0-q1}, [r1]! + + vld1.8 {q0-q1}, [r2]! + veor q0, q0, q2 + veor q1, q1, q6 + vst1.8 {q0-q1}, [r1]! + + vld1.8 {q0-q1}, [r2]! + veor q0, q0, q10 + veor q1, q1, q14 + vst1.8 {q0-q1}, [r1]! + + vld1.8 {q0-q1}, [r2]! + veor q0, q0, q4 + veor q1, q1, q5 + vst1.8 {q0-q1}, [r1]! + + vld1.8 {q0-q1}, [r2]! + veor q0, q0, q9 + veor q1, q1, q13 + vst1.8 {q0-q1}, [r1]! + + vld1.8 {q0-q1}, [r2]! + veor q0, q0, q3 + veor q1, q1, q7 + vst1.8 {q0-q1}, [r1]! + + vld1.8 {q0-q1}, [r2] + veor q0, q0, q11 + veor q1, q1, q15 + vst1.8 {q0-q1}, [r1] + + mov sp, ip + pop {r4-r6, pc} +ENDPROC(chacha20_4block_xor_neon) + + .align 4 +CTRINC: .word 0, 1, 2, 3 diff --git a/arch/arm/crypto/chacha20-neon-glue.c b/arch/arm/crypto/chacha20-neon-glue.c new file mode 100644 index 000000000000..59a7be08e80c --- /dev/null +++ b/arch/arm/crypto/chacha20-neon-glue.c @@ -0,0 +1,127 @@ +/* + * ChaCha20 256-bit cipher algorithm, RFC7539, ARM NEON functions + * + * Copyright (C) 2016 Linaro, Ltd. <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Based on: + * ChaCha20 256-bit cipher algorithm, RFC7539, SIMD glue code + * + * Copyright (C) 2015 Martin Willi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <crypto/algapi.h> +#include <crypto/chacha20.h> +#include <crypto/internal/skcipher.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#include <asm/hwcap.h> +#include <asm/neon.h> +#include <asm/simd.h> + +asmlinkage void chacha20_block_xor_neon(u32 *state, u8 *dst, const u8 *src); +asmlinkage void chacha20_4block_xor_neon(u32 *state, u8 *dst, const u8 *src); + +static void chacha20_doneon(u32 *state, u8 *dst, const u8 *src, + unsigned int bytes) +{ + u8 buf[CHACHA20_BLOCK_SIZE]; + + while (bytes >= CHACHA20_BLOCK_SIZE * 4) { + chacha20_4block_xor_neon(state, dst, src); + bytes -= CHACHA20_BLOCK_SIZE * 4; + src += CHACHA20_BLOCK_SIZE * 4; + dst += CHACHA20_BLOCK_SIZE * 4; + state[12] += 4; + } + while (bytes >= CHACHA20_BLOCK_SIZE) { + chacha20_block_xor_neon(state, dst, src); + bytes -= CHACHA20_BLOCK_SIZE; + src += CHACHA20_BLOCK_SIZE; + dst += CHACHA20_BLOCK_SIZE; + state[12]++; + } + if (bytes) { + memcpy(buf, src, bytes); + chacha20_block_xor_neon(state, buf, buf); + memcpy(dst, buf, bytes); + } +} + +static int chacha20_neon(struct skcipher_request *req) +{ + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct chacha20_ctx *ctx = crypto_skcipher_ctx(tfm); + struct skcipher_walk walk; + u32 state[16]; + int err; + + if (req->cryptlen <= CHACHA20_BLOCK_SIZE || !may_use_simd()) + return crypto_chacha20_crypt(req); + + err = skcipher_walk_virt(&walk, req, true); + + crypto_chacha20_init(state, ctx, walk.iv); + + kernel_neon_begin(); + while (walk.nbytes > 0) { + unsigned int nbytes = walk.nbytes; + + if (nbytes < walk.total) + nbytes = round_down(nbytes, walk.stride); + + chacha20_doneon(state, walk.dst.virt.addr, walk.src.virt.addr, + nbytes); + err = skcipher_walk_done(&walk, walk.nbytes - nbytes); + } + kernel_neon_end(); + + return err; +} + +static struct skcipher_alg alg = { + .base.cra_name = "chacha20", + .base.cra_driver_name = "chacha20-neon", + .base.cra_priority = 300, + .base.cra_blocksize = 1, + .base.cra_ctxsize = sizeof(struct chacha20_ctx), + .base.cra_module = THIS_MODULE, + + .min_keysize = CHACHA20_KEY_SIZE, + .max_keysize = CHACHA20_KEY_SIZE, + .ivsize = CHACHA20_IV_SIZE, + .chunksize = CHACHA20_BLOCK_SIZE, + .walksize = 4 * CHACHA20_BLOCK_SIZE, + .setkey = crypto_chacha20_setkey, + .encrypt = chacha20_neon, + .decrypt = chacha20_neon, +}; + +static int __init chacha20_simd_mod_init(void) +{ + if (!(elf_hwcap & HWCAP_NEON)) + return -ENODEV; + + return crypto_register_skcipher(&alg); +} + +static void __exit chacha20_simd_mod_fini(void) +{ + crypto_unregister_skcipher(&alg); +} + +module_init(chacha20_simd_mod_init); +module_exit(chacha20_simd_mod_fini); + +MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CRYPTO("chacha20"); diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index efb21757d41f..b14e8c7d71bd 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -2,7 +2,6 @@ generic-y += bitsperlong.h generic-y += clkdev.h -generic-y += cputime.h generic-y += current.h generic-y += early_ioremap.h generic-y += emergency-restart.h diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index bdd283bc5842..02454fa15d2c 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -490,7 +490,7 @@ static inline int set_memory_x(unsigned long addr, int numpages) { return 0; } static inline int set_memory_nx(unsigned long addr, int numpages) { return 0; } #endif -#ifdef CONFIG_DEBUG_RODATA +#ifdef CONFIG_STRICT_KERNEL_RWX void set_kernel_text_rw(void); void set_kernel_text_ro(void); #else diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h index 4111592f0130..220ba207be91 100644 --- a/arch/arm/include/asm/device.h +++ b/arch/arm/include/asm/device.h @@ -7,7 +7,6 @@ #define ASMARM_DEVICE_H struct dev_archdata { - struct dma_map_ops *dma_ops; #ifdef CONFIG_DMABOUNCE struct dmabounce_device_info *dmabounce; #endif diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index bf02dbd9ccda..716656925975 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -13,28 +13,22 @@ #include <asm/xen/hypervisor.h> #define DMA_ERROR_CODE (~(dma_addr_t)0x0) -extern struct dma_map_ops arm_dma_ops; -extern struct dma_map_ops arm_coherent_dma_ops; +extern const struct dma_map_ops arm_dma_ops; +extern const struct dma_map_ops arm_coherent_dma_ops; -static inline struct dma_map_ops *__generic_dma_ops(struct device *dev) +static inline const struct dma_map_ops *__generic_dma_ops(struct device *dev) { - if (dev && dev->archdata.dma_ops) - return dev->archdata.dma_ops; + if (dev && dev->dma_ops) + return dev->dma_ops; return &arm_dma_ops; } -static inline struct dma_map_ops *get_dma_ops(struct device *dev) +static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus) { if (xen_initial_domain()) return xen_dma_ops; else - return __generic_dma_ops(dev); -} - -static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops) -{ - BUG_ON(!dev); - dev->archdata.dma_ops = ops; + return __generic_dma_ops(NULL); } #define HAVE_ARCH_DMA_SUPPORTED 1 diff --git a/arch/arm/include/asm/efi.h b/arch/arm/include/asm/efi.h index 0b06f5341b45..e4e6a9d6a825 100644 --- a/arch/arm/include/asm/efi.h +++ b/arch/arm/include/asm/efi.h @@ -55,6 +55,7 @@ void efi_virtmap_unload(void); #define efi_call_early(f, ...) sys_table_arg->boottime->f(__VA_ARGS__) #define __efi_call_early(f, ...) f(__VA_ARGS__) +#define efi_call_runtime(f, ...) sys_table_arg->runtime->f(__VA_ARGS__) #define efi_is_64bit() (false) #define efi_call_proto(protocol, f, instance, ...) \ diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h index 3ea9be559726..59655459da59 100644 --- a/arch/arm/include/asm/kprobes.h +++ b/arch/arm/include/asm/kprobes.h @@ -16,6 +16,9 @@ #ifndef _ARM_KPROBES_H #define _ARM_KPROBES_H +#include <asm-generic/kprobes.h> + +#ifdef CONFIG_KPROBES #include <linux/types.h> #include <linux/ptrace.h> #include <linux/notifier.h> @@ -83,4 +86,5 @@ struct arch_optimized_insn { */ }; +#endif /* CONFIG_KPROBES */ #endif /* _ARM_KPROBES_H */ diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index d5423ab15ed5..cc495d799c67 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -60,9 +60,6 @@ struct kvm_arch { /* The last vcpu id that ran on each physical CPU */ int __percpu *last_vcpu_ran; - /* Timer */ - struct arch_timer_kvm timer; - /* * Anything that is not used directly from assembly code goes * here. diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index 74a44727f8e1..95f38dcd611d 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -129,8 +129,7 @@ static inline bool vcpu_has_cache_enabled(struct kvm_vcpu *vcpu) static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, kvm_pfn_t pfn, - unsigned long size, - bool ipa_uncached) + unsigned long size) { /* * If we are going to insert an instruction page and the icache is @@ -150,18 +149,12 @@ static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, * and iterate over the range. */ - bool need_flush = !vcpu_has_cache_enabled(vcpu) || ipa_uncached; - VM_BUG_ON(size & ~PAGE_MASK); - if (!need_flush && !icache_is_pipt()) - goto vipt_cache; - while (size) { void *va = kmap_atomic_pfn(pfn); - if (need_flush) - kvm_flush_dcache_to_poc(va, PAGE_SIZE); + kvm_flush_dcache_to_poc(va, PAGE_SIZE); if (icache_is_pipt()) __cpuc_coherent_user_range((unsigned long)va, @@ -173,7 +166,6 @@ static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, kunmap_atomic(va); } -vipt_cache: if (!icache_is_pipt() && !icache_is_vivt_asid_tagged()) { /* any kind of VIPT cache */ __flush_icache_all(); diff --git a/arch/arm/include/asm/mach/flash.h b/arch/arm/include/asm/mach/flash.h index 4ca69fe2c850..bada3f845a97 100644 --- a/arch/arm/include/asm/mach/flash.h +++ b/arch/arm/include/asm/mach/flash.h @@ -22,7 +22,7 @@ struct mtd_info; * set_vpp: method called to enable or disable VPP * mmcontrol: method called to enable or disable Sync. Burst Read in OneNAND * parts: optional array of mtd_partitions for static partitioning - * nr_parts: number of mtd_partitions for static partitoning + * nr_parts: number of mtd_partitions for static partitioning */ struct flash_platform_data { const char *map_name; diff --git a/arch/arm/include/asm/virt.h b/arch/arm/include/asm/virt.h index a2e75b84e2ae..6dae1956c74d 100644 --- a/arch/arm/include/asm/virt.h +++ b/arch/arm/include/asm/virt.h @@ -80,6 +80,11 @@ static inline bool is_kernel_in_hyp_mode(void) return false; } +static inline bool has_vhe(void) +{ + return false; +} + /* The section containing the hypervisor idmap text */ extern char __hyp_idmap_text_start[]; extern char __hyp_idmap_text_end[]; diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h index af05f8e0903e..6ebd3e6a1fd1 100644 --- a/arch/arm/include/uapi/asm/kvm.h +++ b/arch/arm/include/uapi/asm/kvm.h @@ -181,10 +181,23 @@ struct kvm_arch_memory_slot { #define KVM_DEV_ARM_VGIC_GRP_CPU_REGS 2 #define KVM_DEV_ARM_VGIC_CPUID_SHIFT 32 #define KVM_DEV_ARM_VGIC_CPUID_MASK (0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT) +#define KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT 32 +#define KVM_DEV_ARM_VGIC_V3_MPIDR_MASK \ + (0xffffffffULL << KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT) #define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0 #define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT) +#define KVM_DEV_ARM_VGIC_SYSREG_INSTR_MASK (0xffff) #define KVM_DEV_ARM_VGIC_GRP_NR_IRQS 3 #define KVM_DEV_ARM_VGIC_GRP_CTRL 4 +#define KVM_DEV_ARM_VGIC_GRP_REDIST_REGS 5 +#define KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS 6 +#define KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO 7 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT 10 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK \ + (0x3fffffULL << KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT) +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK 0x3ff +#define VGIC_LEVEL_INFO_LINE_LEVEL 0 + #define KVM_DEV_ARM_VGIC_CTRL_INIT 0 /* KVM_IRQ_LINE irq field index values */ diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 7e45f69a0ddc..8e8d20cdbce7 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -178,6 +178,6 @@ EXPORT_SYMBOL(__pv_offset); #endif #ifdef CONFIG_HAVE_ARM_SMCCC -EXPORT_SYMBOL(arm_smccc_smc); -EXPORT_SYMBOL(arm_smccc_hvc); +EXPORT_SYMBOL(__arm_smccc_smc); +EXPORT_SYMBOL(__arm_smccc_hvc); #endif diff --git a/arch/arm/kernel/patch.c b/arch/arm/kernel/patch.c index 69bda1a5707e..020560b2dcb7 100644 --- a/arch/arm/kernel/patch.c +++ b/arch/arm/kernel/patch.c @@ -24,9 +24,9 @@ static void __kprobes *patch_map(void *addr, int fixmap, unsigned long *flags) bool module = !core_kernel_text(uintaddr); struct page *page; - if (module && IS_ENABLED(CONFIG_DEBUG_SET_MODULE_RONX)) + if (module && IS_ENABLED(CONFIG_STRICT_MODULE_RWX)) page = vmalloc_to_page(addr); - else if (!module && IS_ENABLED(CONFIG_DEBUG_RODATA)) + else if (!module && IS_ENABLED(CONFIG_STRICT_KERNEL_RWX)) page = virt_to_page(addr); else return addr; diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index 09413e7b49aa..96b7a477a8db 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -581,9 +581,5 @@ static struct platform_driver armv6_pmu_driver = { .probe = armv6_pmu_device_probe, }; -static int __init register_armv6_pmu_driver(void) -{ - return platform_driver_register(&armv6_pmu_driver); -} -device_initcall(register_armv6_pmu_driver); +builtin_platform_driver(armv6_pmu_driver); #endif /* CONFIG_CPU_V6 || CONFIG_CPU_V6K */ diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index b9423491b9d7..ab6522b43659 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -2034,9 +2034,5 @@ static struct platform_driver armv7_pmu_driver = { .probe = armv7_pmu_device_probe, }; -static int __init register_armv7_pmu_driver(void) -{ - return platform_driver_register(&armv7_pmu_driver); -} -device_initcall(register_armv7_pmu_driver); +builtin_platform_driver(armv7_pmu_driver); #endif /* CONFIG_CPU_V7 */ diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index aa0499e2eef7..0e51f5e4f879 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -767,9 +767,5 @@ static struct platform_driver xscale_pmu_driver = { .probe = xscale_pmu_device_probe, }; -static int __init register_xscale_pmu_driver(void) -{ - return platform_driver_register(&xscale_pmu_driver); -} -device_initcall(register_xscale_pmu_driver); +builtin_platform_driver(xscale_pmu_driver); #endif /* CONFIG_CPU_XSCALE */ diff --git a/arch/arm/kernel/smccc-call.S b/arch/arm/kernel/smccc-call.S index 2e48b674aab1..e5d43066b889 100644 --- a/arch/arm/kernel/smccc-call.S +++ b/arch/arm/kernel/smccc-call.S @@ -46,17 +46,19 @@ UNWIND( .fnend) /* * void smccc_smc(unsigned long a0, unsigned long a1, unsigned long a2, * unsigned long a3, unsigned long a4, unsigned long a5, - * unsigned long a6, unsigned long a7, struct arm_smccc_res *res) + * unsigned long a6, unsigned long a7, struct arm_smccc_res *res, + * struct arm_smccc_quirk *quirk) */ -ENTRY(arm_smccc_smc) +ENTRY(__arm_smccc_smc) SMCCC SMCCC_SMC -ENDPROC(arm_smccc_smc) +ENDPROC(__arm_smccc_smc) /* * void smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2, * unsigned long a3, unsigned long a4, unsigned long a5, - * unsigned long a6, unsigned long a7, struct arm_smccc_res *res) + * unsigned long a6, unsigned long a7, struct arm_smccc_res *res, + * struct arm_smccc_quirk *quirk) */ -ENTRY(arm_smccc_hvc) +ENTRY(__arm_smccc_hvc) SMCCC SMCCC_HVC -ENDPROC(arm_smccc_hvc) +ENDPROC(__arm_smccc_hvc) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 46377c40d056..5a07c5a4b894 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -371,7 +371,7 @@ asmlinkage void secondary_start_kernel(void) * reference and switch to it. */ cpu = smp_processor_id(); - atomic_inc(&mm->mm_count); + mmgrab(mm); current->active_mm = mm; cpumask_set_cpu(cpu, mm_cpumask(mm)); diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index f7f55df0bf7b..ce18007f9e4e 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -97,7 +97,7 @@ SECTIONS HEAD_TEXT } -#ifdef CONFIG_DEBUG_RODATA +#ifdef CONFIG_STRICT_KERNEL_RWX . = ALIGN(1<<SECTION_SHIFT); #endif @@ -158,7 +158,7 @@ SECTIONS NOTES -#ifdef CONFIG_DEBUG_RODATA +#ifdef CONFIG_STRICT_KERNEL_RWX . = ALIGN(1<<SECTION_SHIFT); #else . = ALIGN(PAGE_SIZE); @@ -230,7 +230,7 @@ SECTIONS PERCPU_SECTION(L1_CACHE_BYTES) #endif -#ifdef CONFIG_DEBUG_RODATA +#ifdef CONFIG_STRICT_KERNEL_RWX . = ALIGN(1<<SECTION_SHIFT); #else . = ALIGN(THREAD_SIZE); @@ -325,7 +325,7 @@ SECTIONS STABS_DEBUG } -#ifdef CONFIG_DEBUG_RODATA +#ifdef CONFIG_STRICT_KERNEL_RWX /* * Without CONFIG_DEBUG_ALIGN_RODATA, __start_rodata_section_aligned will * be the first section-aligned location after __start_rodata. Otherwise, diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile index d571243ab4d1..7b3670c2ae7b 100644 --- a/arch/arm/kvm/Makefile +++ b/arch/arm/kvm/Makefile @@ -7,7 +7,7 @@ ifeq ($(plus_virt),+virt) plus_virt_def := -DREQUIRES_VIRT=1 endif -ccflags-y += -Iarch/arm/kvm +ccflags-y += -Iarch/arm/kvm -Ivirt/kvm/arm/vgic CFLAGS_arm.o := -I. $(plus_virt_def) CFLAGS_mmu.o := -I. @@ -20,7 +20,7 @@ kvm-arm-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o $(KVM)/vf obj-$(CONFIG_KVM_ARM_HOST) += hyp/ obj-y += kvm-arm.o init.o interrupts.o obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o -obj-y += coproc.o coproc_a15.o coproc_a7.o mmio.o psci.o perf.o +obj-y += coproc.o coproc_a15.o coproc_a7.o mmio.o psci.o perf.o vgic-v3-coproc.o obj-y += $(KVM)/arm/aarch32.o obj-y += $(KVM)/arm/vgic/vgic.o @@ -33,5 +33,6 @@ obj-y += $(KVM)/arm/vgic/vgic-mmio-v2.o obj-y += $(KVM)/arm/vgic/vgic-mmio-v3.o obj-y += $(KVM)/arm/vgic/vgic-kvm-device.o obj-y += $(KVM)/arm/vgic/vgic-its.o +obj-y += $(KVM)/arm/vgic/vgic-debug.o obj-y += $(KVM)/irqchip.o obj-y += $(KVM)/arm/arch_timer.o diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 11676787ad49..c9a2103faeb9 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -135,7 +135,6 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) goto out_free_stage2_pgd; kvm_vgic_early_init(kvm); - kvm_timer_init(kvm); /* Mark the initial VMID generation invalid */ kvm->arch.vmid_gen = 0; @@ -207,6 +206,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) case KVM_CAP_ARM_PSCI_0_2: case KVM_CAP_READONLY_MEM: case KVM_CAP_MP_STATE: + case KVM_CAP_IMMEDIATE_EXIT: r = 1; break; case KVM_CAP_COALESCED_MMIO: @@ -301,7 +301,8 @@ void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu) int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu) { - return kvm_timer_should_fire(vcpu); + return kvm_timer_should_fire(vcpu_vtimer(vcpu)) || + kvm_timer_should_fire(vcpu_ptimer(vcpu)); } void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu) @@ -604,6 +605,9 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) return ret; } + if (run->immediate_exit) + return -EINTR; + if (vcpu->sigset_active) sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved); @@ -1099,6 +1103,9 @@ static void cpu_init_hyp_mode(void *dummy) __cpu_init_hyp_mode(pgd_ptr, hyp_stack_ptr, vector_ptr); __cpu_init_stage2(); + if (is_kernel_in_hyp_mode()) + kvm_timer_init_vhe(); + kvm_arm_init_debug(); } diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index a5265edbeeab..962616fd4ddd 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -1232,9 +1232,9 @@ void kvm_arch_mmu_enable_log_dirty_pt_masked(struct kvm *kvm, } static void coherent_cache_guest_page(struct kvm_vcpu *vcpu, kvm_pfn_t pfn, - unsigned long size, bool uncached) + unsigned long size) { - __coherent_cache_guest_page(vcpu, pfn, size, uncached); + __coherent_cache_guest_page(vcpu, pfn, size); } static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, @@ -1250,7 +1250,6 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, struct vm_area_struct *vma; kvm_pfn_t pfn; pgprot_t mem_type = PAGE_S2; - bool fault_ipa_uncached; bool logging_active = memslot_is_logging(memslot); unsigned long flags = 0; @@ -1337,8 +1336,6 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, if (!hugetlb && !force_pte) hugetlb = transparent_hugepage_adjust(&pfn, &fault_ipa); - fault_ipa_uncached = memslot->flags & KVM_MEMSLOT_INCOHERENT; - if (hugetlb) { pmd_t new_pmd = pfn_pmd(pfn, mem_type); new_pmd = pmd_mkhuge(new_pmd); @@ -1346,7 +1343,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, new_pmd = kvm_s2pmd_mkwrite(new_pmd); kvm_set_pfn_dirty(pfn); } - coherent_cache_guest_page(vcpu, pfn, PMD_SIZE, fault_ipa_uncached); + coherent_cache_guest_page(vcpu, pfn, PMD_SIZE); ret = stage2_set_pmd_huge(kvm, memcache, fault_ipa, &new_pmd); } else { pte_t new_pte = pfn_pte(pfn, mem_type); @@ -1356,7 +1353,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, kvm_set_pfn_dirty(pfn); mark_page_dirty(kvm, gfn); } - coherent_cache_guest_page(vcpu, pfn, PAGE_SIZE, fault_ipa_uncached); + coherent_cache_guest_page(vcpu, pfn, PAGE_SIZE); ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte, flags); } @@ -1879,15 +1876,6 @@ void kvm_arch_free_memslot(struct kvm *kvm, struct kvm_memory_slot *free, int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot, unsigned long npages) { - /* - * Readonly memslots are not incoherent with the caches by definition, - * but in practice, they are used mostly to emulate ROMs or NOR flashes - * that the guest may consider devices and hence map as uncached. - * To prevent incoherency issues in these cases, tag all readonly - * regions as incoherent. - */ - if (slot->flags & KVM_MEM_READONLY) - slot->flags |= KVM_MEMSLOT_INCOHERENT; return 0; } diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c index 4b5e802e57d1..1da8b2d14550 100644 --- a/arch/arm/kvm/reset.c +++ b/arch/arm/kvm/reset.c @@ -37,6 +37,11 @@ static struct kvm_regs cortexa_regs_reset = { .usr_regs.ARM_cpsr = SVC_MODE | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT, }; +static const struct kvm_irq_level cortexa_ptimer_irq = { + { .irq = 30 }, + .level = 1, +}; + static const struct kvm_irq_level cortexa_vtimer_irq = { { .irq = 27 }, .level = 1, @@ -58,6 +63,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) { struct kvm_regs *reset_regs; const struct kvm_irq_level *cpu_vtimer_irq; + const struct kvm_irq_level *cpu_ptimer_irq; switch (vcpu->arch.target) { case KVM_ARM_TARGET_CORTEX_A7: @@ -65,6 +71,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) reset_regs = &cortexa_regs_reset; vcpu->arch.midr = read_cpuid_id(); cpu_vtimer_irq = &cortexa_vtimer_irq; + cpu_ptimer_irq = &cortexa_ptimer_irq; break; default: return -ENODEV; @@ -77,5 +84,5 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) kvm_reset_coprocs(vcpu); /* Reset arch_timer context */ - return kvm_timer_vcpu_reset(vcpu, cpu_vtimer_irq); + return kvm_timer_vcpu_reset(vcpu, cpu_vtimer_irq, cpu_ptimer_irq); } diff --git a/arch/arm/kvm/vgic-v3-coproc.c b/arch/arm/kvm/vgic-v3-coproc.c new file mode 100644 index 000000000000..f41abf76366f --- /dev/null +++ b/arch/arm/kvm/vgic-v3-coproc.c @@ -0,0 +1,35 @@ +/* + * VGIC system registers handling functions for AArch32 mode + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kvm.h> +#include <linux/kvm_host.h> +#include <asm/kvm_emulate.h> +#include "vgic.h" + +int vgic_v3_has_cpu_sysregs_attr(struct kvm_vcpu *vcpu, bool is_write, u64 id, + u64 *reg) +{ + /* + * TODO: Implement for AArch32 + */ + return -ENXIO; +} + +int vgic_v3_cpu_sysregs_uaccess(struct kvm_vcpu *vcpu, bool is_write, u64 id, + u64 *reg) +{ + /* + * TODO: Implement for AArch32 + */ + return -ENXIO; +} diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig index 5225fbcb250d..f3f8c5c658db 100644 --- a/arch/arm/mach-aspeed/Kconfig +++ b/arch/arm/mach-aspeed/Kconfig @@ -5,6 +5,8 @@ menuconfig ARCH_ASPEED select WATCHDOG select ASPEED_WATCHDOG select MOXART_TIMER + select MFD_SYSCON + select PINCTRL help Say Y here if you want to run your kernel on an ASpeed BMC SoC. @@ -14,6 +16,7 @@ config MACH_ASPEED_G4 bool "Aspeed SoC 4th Generation" depends on ARCH_MULTI_V5 select CPU_ARM926T + select PINCTRL_ASPEED_G4 help Say yes if you intend to run on an Aspeed ast2400 or similar fourth generation BMCs, such as those used by OpenPower Power8 @@ -23,6 +26,7 @@ config MACH_ASPEED_G5 bool "Aspeed SoC 5th Generation" depends on ARCH_MULTI_V6 select CPU_V6 + select PINCTRL_ASPEED_G5 help Say yes if you intend to run on an Aspeed ast2500 or similar fifth generation Aspeed BMCs. diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index b4332b727e9c..3d89b7905bd9 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -55,7 +55,7 @@ static struct { int memctrl; } at91_pm_data; -void __iomem *at91_ramc_base[2]; +static void __iomem *at91_ramc_base[2]; static int at91_pm_valid_state(suspend_state_t state) { diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 3fcf8810f14e..bf980c6ef294 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -18,8 +18,6 @@ #include <soc/at91/at91sam9_sdramc.h> #ifndef __ASSEMBLY__ -extern void __iomem *at91_ramc_base[]; - #define at91_ramc_read(id, field) \ __raw_readl(at91_ramc_base[id] + field) diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 0a2e6da45f28..df96ca9eab6d 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -21,7 +21,7 @@ obj-$(CONFIG_AINTC) += irq.o obj-$(CONFIG_CP_INTC) += cp_intc.o # Board specific -obj-$(CONFIG_MACH_DA8XX_DT) += da8xx-dt.o +obj-$(CONFIG_MACH_DA8XX_DT) += da8xx-dt.o pdata-quirks.o obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o obj-$(CONFIG_MACH_NEUROS_OSD2) += board-neuros-osd2.o diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index aac3ab1a044f..df3ca38778af 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -18,6 +18,7 @@ #include <linux/gpio/machine.h> #include <linux/init.h> #include <linux/kernel.h> +#include <linux/leds.h> #include <linux/i2c.h> #include <linux/platform_data/at24.h> #include <linux/platform_data/pca953x.h> diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 521e40977265..023480b75244 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -25,6 +25,7 @@ #include <linux/videodev2.h> #include <linux/v4l2-dv-timings.h> #include <linux/export.h> +#include <linux/leds.h> #include <media/i2c/tvp514x.h> diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index ad10017203c1..0a7838852649 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -25,6 +25,7 @@ */ #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/leds.h> #include <linux/mtd/partitions.h> #include <linux/platform_data/gpio-davinci.h> #include <linux/platform_data/i2c-davinci.h> diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 41d5500996b2..a3e78074be70 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -12,6 +12,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/console.h> +#include <linux/interrupt.h> #include <linux/gpio.h> #include <linux/gpio/machine.h> #include <linux/platform_data/gpio-davinci.h> diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index df42c93a93d6..f5dce9b4e617 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -31,10 +31,10 @@ static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); static DEFINE_SPINLOCK(clockfw_lock); -static void __clk_enable(struct clk *clk) +void davinci_clk_enable(struct clk *clk) { if (clk->parent) - __clk_enable(clk->parent); + davinci_clk_enable(clk->parent); if (clk->usecount++ == 0) { if (clk->flags & CLK_PSC) davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc, @@ -44,7 +44,7 @@ static void __clk_enable(struct clk *clk) } } -static void __clk_disable(struct clk *clk) +void davinci_clk_disable(struct clk *clk) { if (WARN_ON(clk->usecount == 0)) return; @@ -56,7 +56,7 @@ static void __clk_disable(struct clk *clk) clk->clk_disable(clk); } if (clk->parent) - __clk_disable(clk->parent); + davinci_clk_disable(clk->parent); } int davinci_clk_reset(struct clk *clk, bool reset) @@ -103,7 +103,7 @@ int clk_enable(struct clk *clk) return -EINVAL; spin_lock_irqsave(&clockfw_lock, flags); - __clk_enable(clk); + davinci_clk_enable(clk); spin_unlock_irqrestore(&clockfw_lock, flags); return 0; @@ -118,7 +118,7 @@ void clk_disable(struct clk *clk) return; spin_lock_irqsave(&clockfw_lock, flags); - __clk_disable(clk); + davinci_clk_disable(clk); spin_unlock_irqrestore(&clockfw_lock, flags); } EXPORT_SYMBOL(clk_disable); diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index e2a5437a1aee..fa2b83752e03 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -132,6 +132,8 @@ int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate); int davinci_set_refclk_rate(unsigned long rate); int davinci_simple_set_rate(struct clk *clk, unsigned long rate); int davinci_clk_reset(struct clk *clk, bool reset); +void davinci_clk_enable(struct clk *clk); +void davinci_clk_disable(struct clk *clk); extern struct platform_device davinci_wdt_device; extern void davinci_watchdog_reset(struct platform_device *); diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index e770c97ea45c..ccad2f99dfc9 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -319,6 +319,16 @@ static struct clk emac_clk = { .gpsc = 1, }; +/* + * In order to avoid adding the emac_clk to the clock lookup table twice (and + * screwing up the linked list in the process) create a separate clock for + * mdio inheriting the rate from emac_clk. + */ +static struct clk mdio_clk = { + .name = "mdio", + .parent = &emac_clk, +}; + static struct clk mcasp_clk = { .name = "mcasp", .parent = &async3_clk, @@ -367,6 +377,16 @@ static struct clk aemif_clk = { .flags = ALWAYS_ENABLED, }; +/* + * In order to avoid adding the aemif_clk to the clock lookup table twice (and + * screwing up the linked list in the process) create a separate clock for + * nand inheriting the rate from aemif_clk. + */ +static struct clk aemif_nand_clk = { + .name = "nand", + .parent = &aemif_clk, +}; + static struct clk usb11_clk = { .name = "usb11", .parent = &pll0_sysclk4, @@ -529,7 +549,7 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "arm", &arm_clk), CLK(NULL, "rmii", &rmii_clk), CLK("davinci_emac.1", NULL, &emac_clk), - CLK("davinci_mdio.0", "fck", &emac_clk), + CLK("davinci_mdio.0", "fck", &mdio_clk), CLK("davinci-mcasp.0", NULL, &mcasp_clk), CLK("davinci-mcbsp.0", NULL, &mcbsp0_clk), CLK("davinci-mcbsp.1", NULL, &mcbsp1_clk), @@ -537,13 +557,13 @@ static struct clk_lookup da850_clks[] = { CLK("da830-mmc.0", NULL, &mmcsd0_clk), CLK("da830-mmc.1", NULL, &mmcsd1_clk), CLK("ti-aemif", NULL, &aemif_clk), - CLK(NULL, "aemif", &aemif_clk), + CLK("davinci-nand.0", "aemif", &aemif_nand_clk), CLK("ohci-da8xx", "usb11", &usb11_clk), CLK("musb-da8xx", "usb20", &usb20_clk), CLK("spi_davinci.0", NULL, &spi0_clk), CLK("spi_davinci.1", NULL, &spi1_clk), CLK("vpif", NULL, &vpif_clk), - CLK("ahci_da850", NULL, &sata_clk), + CLK("ahci_da850", "fck", &sata_clk), CLK("davinci-rproc.0", NULL, &dsp_clk), CLK(NULL, NULL, &ehrpwm_clk), CLK("ehrpwm.0", "fck", &ehrpwm0_clk), @@ -1174,14 +1194,28 @@ static int da850_set_armrate(struct clk *clk, unsigned long index) return clk_set_rate(pllclk, index); } -static int da850_set_pll0rate(struct clk *clk, unsigned long index) +static int da850_set_pll0rate(struct clk *clk, unsigned long rate) { - unsigned int prediv, mult, postdiv; - struct da850_opp *opp; struct pll_data *pll = clk->pll_data; + struct cpufreq_frequency_table *freq; + unsigned int prediv, mult, postdiv; + struct da850_opp *opp = NULL; int ret; - opp = (struct da850_opp *) cpufreq_info.freq_table[index].driver_data; + rate /= 1000; + + for (freq = da850_freq_table; + freq->frequency != CPUFREQ_TABLE_END; freq++) { + /* rate is in Hz, freq->frequency is in KHz */ + if (freq->frequency == rate) { + opp = (struct da850_opp *)freq->driver_data; + break; + } + } + + if (!opp) + return -EINVAL; + prediv = opp->prediv; mult = opp->mult; postdiv = opp->postdiv; diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index 9ee44da6eb7b..e3cef503cd8f 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -11,6 +11,7 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/irqdomain.h> +#include <linux/platform_data/ti-aemif.h> #include <asm/mach/arch.h> @@ -18,6 +19,15 @@ #include "cp_intc.h" #include <mach/da8xx.h> +static struct of_dev_auxdata da850_aemif_auxdata_lookup[] = { + OF_DEV_AUXDATA("ti,davinci-nand", 0x62000000, "davinci-nand.0", NULL), + {} +}; + +static struct aemif_platform_data aemif_data = { + .dev_lookup = da850_aemif_auxdata_lookup, +}; + static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL), OF_DEV_AUXDATA("ti,davinci-i2c", 0x01e28000, "i2c_davinci.2", NULL), @@ -37,11 +47,12 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1", NULL), OF_DEV_AUXDATA("ti,da830-mcasp-audio", 0x01d00000, "davinci-mcasp.0", NULL), - OF_DEV_AUXDATA("ti,da850-aemif", 0x68000000, "ti-aemif", NULL), + OF_DEV_AUXDATA("ti,da850-aemif", 0x68000000, "ti-aemif", &aemif_data), OF_DEV_AUXDATA("ti,da850-tilcdc", 0x01e13000, "da8xx_lcdc.0", NULL), OF_DEV_AUXDATA("ti,da830-ohci", 0x01e25000, "ohci-da8xx", NULL), OF_DEV_AUXDATA("ti,da830-musb", 0x01e00000, "musb-da8xx", NULL), OF_DEV_AUXDATA("ti,da830-usb-phy", 0x01c1417c, "da8xx-usb-phy", NULL), + OF_DEV_AUXDATA("ti,da850-ahci", 0x01e18000, "ahci_da850", NULL), {} }; @@ -49,6 +60,9 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { static void __init da850_init_machine(void) { + /* All existing boards use 100MHz SATA refclkpn */ + static const unsigned long sata_refclkpn = 100 * 1000 * 1000; + int ret; ret = da8xx_register_usb20_phy_clk(false); @@ -60,8 +74,14 @@ static void __init da850_init_machine(void) pr_warn("%s: registering USB 1.1 PHY clock failed: %d", __func__, ret); + ret = da850_register_sata_refclk(sata_refclkpn); + if (ret) + pr_warn("%s: registering SATA REFCLK failed: %d", + __func__, ret); + of_platform_default_populate(NULL, da850_auxdata_lookup, NULL); davinci_pm_init(); + pdata_quirks_init(); } static const char *const da850_boards_compat[] __initconst = { diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index c2457b3fdb5f..7cf529ffbe5a 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -24,6 +24,7 @@ #include <mach/common.h> #include <mach/time.h> #include <mach/da8xx.h> +#include <mach/clock.h> #include "cpuidle.h" #include "sram.h" @@ -1023,6 +1024,28 @@ int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect) } #ifdef CONFIG_ARCH_DAVINCI_DA850 +static struct clk sata_refclk = { + .name = "sata_refclk", + .set_rate = davinci_simple_set_rate, +}; + +static struct clk_lookup sata_refclk_lookup = + CLK("ahci_da850", "refclk", &sata_refclk); + +int __init da850_register_sata_refclk(int rate) +{ + int ret; + + sata_refclk.rate = rate; + ret = clk_register(&sata_refclk); + if (ret) + return ret; + + clkdev_add(&sata_refclk_lookup); + + return 0; +} + static struct resource da850_sata_resources[] = { { .start = DA850_SATA_BASE, @@ -1055,8 +1078,11 @@ static struct platform_device da850_sata_device = { int __init da850_register_sata(unsigned long refclkpn) { - /* please see comment in drivers/ata/ahci_da850.c */ - BUG_ON(refclkpn != 100 * 1000 * 1000); + int ret; + + ret = da850_register_sata_refclk(refclkpn); + if (ret) + return ret; return platform_device_register(&da850_sata_device); } diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 0b3c169758ed..037aa66bcac1 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -102,6 +102,8 @@ int davinci_pm_init(void); static inline int davinci_pm_init(void) { return 0; } #endif +void __init pdata_quirks_init(void); + #define SRAM_SIZE SZ_128K #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */ diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 85ff2183b6db..7e464228948b 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -95,6 +95,7 @@ int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); int da8xx_register_usb_refclkin(int rate); int da8xx_register_usb20_phy_clk(bool use_usb_refclkin); int da8xx_register_usb11_phy_clk(bool use_usb_refclkin); +int da850_register_sata_refclk(int rate); int da8xx_register_emac(void); int da8xx_register_uio_pruss(void); int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata); diff --git a/arch/arm/mach-davinci/pdata-quirks.c b/arch/arm/mach-davinci/pdata-quirks.c new file mode 100644 index 000000000000..5b57da475065 --- /dev/null +++ b/arch/arm/mach-davinci/pdata-quirks.c @@ -0,0 +1,39 @@ +/* + * Legacy platform_data quirks + * + * Copyright (C) 2016 BayLibre, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/of_platform.h> + +#include <mach/common.h> + +struct pdata_init { + const char *compatible; + void (*fn)(void); +}; + +static void pdata_quirks_check(struct pdata_init *quirks) +{ + while (quirks->compatible) { + if (of_machine_is_compatible(quirks->compatible)) { + if (quirks->fn) + quirks->fn(); + break; + } + quirks++; + } +} + +static struct pdata_init pdata_quirks[] __initdata = { + { /* sentinel */ }, +}; + +void __init pdata_quirks_init(void) +{ + pdata_quirks_check(pdata_quirks); +} diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c index c6feecf7ae24..9a6af0bd5dc3 100644 --- a/arch/arm/mach-davinci/usb-da8xx.c +++ b/arch/arm/mach-davinci/usb-da8xx.c @@ -22,6 +22,8 @@ #define DA8XX_USB0_BASE 0x01e00000 #define DA8XX_USB1_BASE 0x01e25000 +static struct clk *usb20_clk; + static struct platform_device da8xx_usb_phy = { .name = "da8xx-usb-phy", .id = -1, @@ -158,26 +160,13 @@ int __init da8xx_register_usb_refclkin(int rate) static void usb20_phy_clk_enable(struct clk *clk) { - struct clk *usb20_clk; - int err; u32 val; u32 timeout = 500000; /* 500 msec */ val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20"); - if (IS_ERR(usb20_clk)) { - pr_err("could not get usb20 clk: %ld\n", PTR_ERR(usb20_clk)); - return; - } - /* The USB 2.O PLL requires that the USB 2.O PSC is enabled as well. */ - err = clk_prepare_enable(usb20_clk); - if (err) { - pr_err("failed to enable usb20 clk: %d\n", err); - clk_put(usb20_clk); - return; - } + davinci_clk_enable(usb20_clk); /* * Turn on the USB 2.0 PHY, but just the PLL, and not OTG. The USB 1.1 @@ -197,8 +186,7 @@ static void usb20_phy_clk_enable(struct clk *clk) pr_err("Timeout waiting for USB 2.0 PHY clock good\n"); done: - clk_disable_unprepare(usb20_clk); - clk_put(usb20_clk); + davinci_clk_disable(usb20_clk); } static void usb20_phy_clk_disable(struct clk *clk) @@ -285,11 +273,19 @@ static struct clk_lookup usb20_phy_clk_lookup = int __init da8xx_register_usb20_phy_clk(bool use_usb_refclkin) { struct clk *parent; - int ret = 0; + int ret; + + usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20"); + ret = PTR_ERR_OR_ZERO(usb20_clk); + if (ret) + return ret; parent = clk_get(NULL, use_usb_refclkin ? "usb_refclkin" : "pll0_aux"); - if (IS_ERR(parent)) - return PTR_ERR(parent); + ret = PTR_ERR_OR_ZERO(parent); + if (ret) { + clk_put(usb20_clk); + return ret; + } usb20_phy_clk.parent = parent; ret = clk_register(&usb20_phy_clk); diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index ad92d9f7e4df..0ac176386789 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -27,7 +27,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/gpio.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <linux/spi/spi.h> @@ -106,33 +105,10 @@ static struct cs4271_platform_data edb93xx_cs4271_data = { .gpio_nreset = -EINVAL, /* filled in later */ }; -static int edb93xx_cs4271_hw_setup(struct spi_device *spi) -{ - return gpio_request_one(EP93XX_GPIO_LINE_EGPIO6, - GPIOF_OUT_INIT_HIGH, spi->modalias); -} - -static void edb93xx_cs4271_hw_cleanup(struct spi_device *spi) -{ - gpio_free(EP93XX_GPIO_LINE_EGPIO6); -} - -static void edb93xx_cs4271_hw_cs_control(struct spi_device *spi, int value) -{ - gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, value); -} - -static struct ep93xx_spi_chip_ops edb93xx_cs4271_hw = { - .setup = edb93xx_cs4271_hw_setup, - .cleanup = edb93xx_cs4271_hw_cleanup, - .cs_control = edb93xx_cs4271_hw_cs_control, -}; - static struct spi_board_info edb93xx_spi_board_info[] __initdata = { { .modalias = "cs4271", .platform_data = &edb93xx_cs4271_data, - .controller_data = &edb93xx_cs4271_hw, .max_speed_hz = 6000000, .bus_num = 0, .chip_select = 0, @@ -140,8 +116,13 @@ static struct spi_board_info edb93xx_spi_board_info[] __initdata = { }, }; +static int edb93xx_spi_chipselects[] __initdata = { + EP93XX_GPIO_LINE_EGPIO6, +}; + static struct ep93xx_spi_info edb93xx_spi_info __initdata = { - .num_chipselect = ARRAY_SIZE(edb93xx_spi_board_info), + .chipselect = edb93xx_spi_chipselects, + .num_chipselect = ARRAY_SIZE(edb93xx_spi_chipselects), }; static void __init edb93xx_register_spi(void) diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h index 03c42e5400d2..b0cf2de77f81 100644 --- a/arch/arm/mach-ep93xx/include/mach/uncompress.h +++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h @@ -10,6 +10,7 @@ */ #include <mach/ep93xx-regs.h> +#include <asm/mach-types.h> static unsigned char __raw_readb(unsigned int ptr) { @@ -75,8 +76,19 @@ static void ethernet_reset(void) ; } +#define TS72XX_WDT_CONTROL_PHYS_BASE 0x23800000 +#define TS72XX_WDT_FEED_PHYS_BASE 0x23c00000 +#define TS72XX_WDT_FEED_VAL 0x05 + +static void __maybe_unused ts72xx_watchdog_disable(void) +{ + __raw_writeb(TS72XX_WDT_FEED_VAL, TS72XX_WDT_FEED_PHYS_BASE); + __raw_writeb(0, TS72XX_WDT_CONTROL_PHYS_BASE); +} static void arch_decomp_setup(void) { + if (machine_is_ts72xx()) + ts72xx_watchdog_disable(); ethernet_reset(); } diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index 7bb540c421ee..c7a40f245892 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -49,56 +49,6 @@ static struct ep93xxfb_mach_info __initdata simone_fb_info = { #define MMC_CARD_DETECT_GPIO EP93XX_GPIO_LINE_EGPIO0 /* - * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes - * low between multi-message command blocks. From v1.4, it uses a GPIO instead. - * v1.3 parts will still work, since the signal on SFRMOUT is automatic. - */ -#define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO1 - -/* - * MMC SPI chip select GPIO handling. If you are using SFRMOUT (SFRM1) signal, - * you can leave these empty and pass NULL as .controller_data. - */ - -static int simone_mmc_spi_setup(struct spi_device *spi) -{ - unsigned int gpio = MMC_CHIP_SELECT_GPIO; - int err; - - err = gpio_request(gpio, spi->modalias); - if (err) - return err; - - err = gpio_direction_output(gpio, 1); - if (err) { - gpio_free(gpio); - return err; - } - - return 0; -} - -static void simone_mmc_spi_cleanup(struct spi_device *spi) -{ - unsigned int gpio = MMC_CHIP_SELECT_GPIO; - - gpio_set_value(gpio, 1); - gpio_direction_input(gpio); - gpio_free(gpio); -} - -static void simone_mmc_spi_cs_control(struct spi_device *spi, int value) -{ - gpio_set_value(MMC_CHIP_SELECT_GPIO, value); -} - -static struct ep93xx_spi_chip_ops simone_mmc_spi_ops = { - .setup = simone_mmc_spi_setup, - .cleanup = simone_mmc_spi_cleanup, - .cs_control = simone_mmc_spi_cs_control, -}; - -/* * MMC card detection GPIO setup. */ @@ -152,7 +102,6 @@ static struct mmc_spi_platform_data simone_mmc_spi_data = { static struct spi_board_info simone_spi_devices[] __initdata = { { .modalias = "mmc_spi", - .controller_data = &simone_mmc_spi_ops, .platform_data = &simone_mmc_spi_data, /* * We use 10 MHz even though the maximum is 3.7 MHz. The driver @@ -165,8 +114,18 @@ static struct spi_board_info simone_spi_devices[] __initdata = { }, }; +/* + * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes + * low between multi-message command blocks. From v1.4, it uses a GPIO instead. + * v1.3 parts will still work, since the signal on SFRMOUT is automatic. + */ +static int simone_spi_chipselects[] __initdata = { + EP93XX_GPIO_LINE_EGPIO1, +}; + static struct ep93xx_spi_info simone_spi_info __initdata = { - .num_chipselect = ARRAY_SIZE(simone_spi_devices), + .chipselect = simone_spi_chipselects, + .num_chipselect = ARRAY_SIZE(simone_spi_chipselects), .use_dma = 1, }; diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 3b39ea353d30..8a5b6f059498 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -16,7 +16,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/platform_data/rtc-m48t86.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> @@ -45,16 +44,6 @@ static struct map_desc ts72xx_io_desc[] __initdata = { .pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE), .length = TS72XX_OPTIONS2_SIZE, .type = MT_DEVICE, - }, { - .virtual = (unsigned long)TS72XX_RTC_INDEX_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_RTC_INDEX_PHYS_BASE), - .length = TS72XX_RTC_INDEX_SIZE, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)TS72XX_RTC_DATA_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_RTC_DATA_PHYS_BASE), - .length = TS72XX_RTC_DATA_SIZE, - .type = MT_DEVICE, } }; @@ -179,31 +168,22 @@ static void __init ts72xx_register_flash(void) } } +/************************************************************************* + * RTC M48T86 + *************************************************************************/ +#define TS72XX_RTC_INDEX_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x00800000) +#define TS72XX_RTC_DATA_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x01700000) -static unsigned char ts72xx_rtc_readbyte(unsigned long addr) -{ - __raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE); - return __raw_readb(TS72XX_RTC_DATA_VIRT_BASE); -} - -static void ts72xx_rtc_writebyte(unsigned char value, unsigned long addr) -{ - __raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE); - __raw_writeb(value, TS72XX_RTC_DATA_VIRT_BASE); -} - -static struct m48t86_ops ts72xx_rtc_ops = { - .readbyte = ts72xx_rtc_readbyte, - .writebyte = ts72xx_rtc_writebyte, +static struct resource ts72xx_rtc_resources[] = { + DEFINE_RES_MEM(TS72XX_RTC_INDEX_PHYS_BASE, 0x01), + DEFINE_RES_MEM(TS72XX_RTC_DATA_PHYS_BASE, 0x01), }; static struct platform_device ts72xx_rtc_device = { .name = "rtc-m48t86", .id = -1, - .dev = { - .platform_data = &ts72xx_rtc_ops, - }, - .num_resources = 0, + .resource = ts72xx_rtc_resources, + .num_resources = ARRAY_SIZE(ts72xx_rtc_resources), }; static struct resource ts72xx_wdt_resources[] = { diff --git a/arch/arm/mach-ep93xx/ts72xx.h b/arch/arm/mach-ep93xx/ts72xx.h index 071feaa30adc..2255ba29fdd6 100644 --- a/arch/arm/mach-ep93xx/ts72xx.h +++ b/arch/arm/mach-ep93xx/ts72xx.h @@ -9,8 +9,6 @@ * febff000 22000000 4K model number register (bits 0-2) * febfe000 22400000 4K options register * febfd000 22800000 4K options register #2 - * febf9000 10800000 4K TS-5620 RTC index register - * febf8000 11700000 4K TS-5620 RTC data register */ #define TS72XX_MODEL_PHYS_BASE 0x22000000 @@ -40,15 +38,6 @@ #define TS72XX_OPTIONS2_TS9420 0x04 #define TS72XX_OPTIONS2_TS9420_BOOT 0x02 - -#define TS72XX_RTC_INDEX_VIRT_BASE IOMEM(0xfebf9000) -#define TS72XX_RTC_INDEX_PHYS_BASE 0x10800000 -#define TS72XX_RTC_INDEX_SIZE 0x00001000 - -#define TS72XX_RTC_DATA_VIRT_BASE IOMEM(0xfebf8000) -#define TS72XX_RTC_DATA_PHYS_BASE 0x11700000 -#define TS72XX_RTC_DATA_SIZE 0x00001000 - #define TS72XX_WDT_CONTROL_PHYS_BASE 0x23800000 #define TS72XX_WDT_FEED_PHYS_BASE 0x23c00000 diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 5cced5988498..1daf9441058c 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -175,33 +175,9 @@ static struct cs4271_platform_data vision_cs4271_data = { .gpio_nreset = EP93XX_GPIO_LINE_H(2), }; -static int vision_cs4271_hw_setup(struct spi_device *spi) -{ - return gpio_request_one(EP93XX_GPIO_LINE_EGPIO6, - GPIOF_OUT_INIT_HIGH, spi->modalias); -} - -static void vision_cs4271_hw_cleanup(struct spi_device *spi) -{ - gpio_free(EP93XX_GPIO_LINE_EGPIO6); -} - -static void vision_cs4271_hw_cs_control(struct spi_device *spi, int value) -{ - gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, value); -} - -static struct ep93xx_spi_chip_ops vision_cs4271_hw = { - .setup = vision_cs4271_hw_setup, - .cleanup = vision_cs4271_hw_cleanup, - .cs_control = vision_cs4271_hw_cs_control, -}; - /************************************************************************* * SPI Flash *************************************************************************/ -#define VISION_SPI_FLASH_CS EP93XX_GPIO_LINE_EGPIO7 - static struct mtd_partition vision_spi_flash_partitions[] = { { .name = "SPI bootstrap", @@ -224,68 +200,20 @@ static struct flash_platform_data vision_spi_flash_data = { .nr_parts = ARRAY_SIZE(vision_spi_flash_partitions), }; -static int vision_spi_flash_hw_setup(struct spi_device *spi) -{ - return gpio_request_one(VISION_SPI_FLASH_CS, GPIOF_INIT_HIGH, - spi->modalias); -} - -static void vision_spi_flash_hw_cleanup(struct spi_device *spi) -{ - gpio_free(VISION_SPI_FLASH_CS); -} - -static void vision_spi_flash_hw_cs_control(struct spi_device *spi, int value) -{ - gpio_set_value(VISION_SPI_FLASH_CS, value); -} - -static struct ep93xx_spi_chip_ops vision_spi_flash_hw = { - .setup = vision_spi_flash_hw_setup, - .cleanup = vision_spi_flash_hw_cleanup, - .cs_control = vision_spi_flash_hw_cs_control, -}; - /************************************************************************* * SPI SD/MMC host *************************************************************************/ -#define VISION_SPI_MMC_CS EP93XX_GPIO_LINE_G(2) -#define VISION_SPI_MMC_WP EP93XX_GPIO_LINE_F(0) -#define VISION_SPI_MMC_CD EP93XX_GPIO_LINE_EGPIO15 - static struct mmc_spi_platform_data vision_spi_mmc_data = { .detect_delay = 100, .powerup_msecs = 100, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .flags = MMC_SPI_USE_CD_GPIO | MMC_SPI_USE_RO_GPIO, - .cd_gpio = VISION_SPI_MMC_CD, + .cd_gpio = EP93XX_GPIO_LINE_EGPIO15, .cd_debounce = 1, - .ro_gpio = VISION_SPI_MMC_WP, + .ro_gpio = EP93XX_GPIO_LINE_F(0), .caps2 = MMC_CAP2_RO_ACTIVE_HIGH, }; -static int vision_spi_mmc_hw_setup(struct spi_device *spi) -{ - return gpio_request_one(VISION_SPI_MMC_CS, GPIOF_INIT_HIGH, - spi->modalias); -} - -static void vision_spi_mmc_hw_cleanup(struct spi_device *spi) -{ - gpio_free(VISION_SPI_MMC_CS); -} - -static void vision_spi_mmc_hw_cs_control(struct spi_device *spi, int value) -{ - gpio_set_value(VISION_SPI_MMC_CS, value); -} - -static struct ep93xx_spi_chip_ops vision_spi_mmc_hw = { - .setup = vision_spi_mmc_hw_setup, - .cleanup = vision_spi_mmc_hw_cleanup, - .cs_control = vision_spi_mmc_hw_cs_control, -}; - /************************************************************************* * SPI Bus *************************************************************************/ @@ -293,7 +221,6 @@ static struct spi_board_info vision_spi_board_info[] __initdata = { { .modalias = "cs4271", .platform_data = &vision_cs4271_data, - .controller_data = &vision_cs4271_hw, .max_speed_hz = 6000000, .bus_num = 0, .chip_select = 0, @@ -301,7 +228,6 @@ static struct spi_board_info vision_spi_board_info[] __initdata = { }, { .modalias = "sst25l", .platform_data = &vision_spi_flash_data, - .controller_data = &vision_spi_flash_hw, .max_speed_hz = 20000000, .bus_num = 0, .chip_select = 1, @@ -309,7 +235,6 @@ static struct spi_board_info vision_spi_board_info[] __initdata = { }, { .modalias = "mmc_spi", .platform_data = &vision_spi_mmc_data, - .controller_data = &vision_spi_mmc_hw, .max_speed_hz = 20000000, .bus_num = 0, .chip_select = 2, @@ -317,8 +242,15 @@ static struct spi_board_info vision_spi_board_info[] __initdata = { }, }; +static int vision_spi_chipselects[] __initdata = { + EP93XX_GPIO_LINE_EGPIO6, + EP93XX_GPIO_LINE_EGPIO7, + EP93XX_GPIO_LINE_G(2), +}; + static struct ep93xx_spi_info vision_spi_master __initdata = { - .num_chipselect = ARRAY_SIZE(vision_spi_board_info), + .chipselect = vision_spi_chipselects, + .num_chipselect = ARRAY_SIZE(vision_spi_chipselects), .use_dma = 1, }; diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 0bb63b8d21e7..0a99140b6ba2 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -95,11 +95,6 @@ config SOC_EXYNOS4412 default y depends on ARCH_EXYNOS4 -config SOC_EXYNOS4415 - bool "SAMSUNG EXYNOS4415" - default y - depends on ARCH_EXYNOS4 - config SOC_EXYNOS5250 bool "SAMSUNG EXYNOS5250" default y diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 757fc11de30d..c404c15ad07f 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -45,8 +45,8 @@ static struct platform_device exynos_cpuidle = { .id = -1, }; -void __iomem *sysram_base_addr; -void __iomem *sysram_ns_base_addr; +void __iomem *sysram_base_addr __ro_after_init; +void __iomem *sysram_ns_base_addr __ro_after_init; void __init exynos_sysram_init(void) { @@ -210,7 +210,6 @@ static char const *const exynos_dt_compat[] __initconst = { "samsung,exynos4210", "samsung,exynos4212", "samsung,exynos4412", - "samsung,exynos4415", "samsung,exynos5", "samsung,exynos5250", "samsung,exynos5260", diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c index 214a9cfa92e9..b42622562ea7 100644 --- a/arch/arm/mach-exynos/mcpm-exynos.c +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -32,7 +32,7 @@ #define EXYNOS5420_USE_ARM_CORE_DOWN_STATE BIT(29) #define EXYNOS5420_USE_L2_COMMON_UP_STATE BIT(30) -static void __iomem *ns_sram_base_addr; +static void __iomem *ns_sram_base_addr __ro_after_init; /* * The common v7_exit_coherency_flush API could not be used because of the diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 9f4949f7ed88..5a03bffe7226 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -385,36 +385,6 @@ fail: return pen_release != -1 ? ret : 0; } -/* - * Initialise the CPU possible map early - this describes the CPUs - * which may be present or become present in the system. - */ - -static void __init exynos_smp_init_cpus(void) -{ - void __iomem *scu_base = scu_base_addr(); - unsigned int i, ncores; - - if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) - ncores = scu_base ? scu_get_core_count(scu_base) : 1; - else - /* - * CPU Nodes are passed thru DT and set_cpu_possible - * is set by "arm_dt_init_cpu_maps". - */ - return; - - /* sanity check */ - if (ncores > nr_cpu_ids) { - pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", - ncores, nr_cpu_ids); - ncores = nr_cpu_ids; - } - - for (i = 0; i < ncores; i++) - set_cpu_possible(i, true); -} - static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) { int i; @@ -479,7 +449,6 @@ static void exynos_cpu_die(unsigned int cpu) #endif /* CONFIG_HOTPLUG_CPU */ const struct smp_operations exynos_smp_ops __initconst = { - .smp_init_cpus = exynos_smp_init_cpus, .smp_prepare_cpus = exynos_smp_prepare_cpus, .smp_secondary_init = exynos_secondary_init, .smp_boot_secondary = exynos_boot_secondary, diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index 97765be2cc12..748cfb8d5212 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -57,7 +57,6 @@ struct exynos_wkup_irq { struct exynos_pm_data { const struct exynos_wkup_irq *wkup_irq; unsigned int wake_disable_mask; - unsigned int *release_ret_regs; void (*pm_prepare)(void); void (*pm_resume_prepare)(void); @@ -66,7 +65,7 @@ struct exynos_pm_data { int (*cpu_suspend)(unsigned long); }; -static const struct exynos_pm_data *pm_data; +static const struct exynos_pm_data *pm_data __ro_after_init; static int exynos5420_cpu_state; static unsigned int exynos_pmu_spare3; @@ -95,47 +94,6 @@ static const struct exynos_wkup_irq exynos5250_wkup_irq[] = { { /* sentinel */ }, }; -static unsigned int exynos_release_ret_regs[] = { - S5P_PAD_RET_MAUDIO_OPTION, - S5P_PAD_RET_GPIO_OPTION, - S5P_PAD_RET_UART_OPTION, - S5P_PAD_RET_MMCA_OPTION, - S5P_PAD_RET_MMCB_OPTION, - S5P_PAD_RET_EBIA_OPTION, - S5P_PAD_RET_EBIB_OPTION, - REG_TABLE_END, -}; - -static unsigned int exynos3250_release_ret_regs[] = { - S5P_PAD_RET_MAUDIO_OPTION, - S5P_PAD_RET_GPIO_OPTION, - S5P_PAD_RET_UART_OPTION, - S5P_PAD_RET_MMCA_OPTION, - S5P_PAD_RET_MMCB_OPTION, - S5P_PAD_RET_EBIA_OPTION, - S5P_PAD_RET_EBIB_OPTION, - S5P_PAD_RET_MMC2_OPTION, - S5P_PAD_RET_SPI_OPTION, - REG_TABLE_END, -}; - -static unsigned int exynos5420_release_ret_regs[] = { - EXYNOS_PAD_RET_DRAM_OPTION, - EXYNOS_PAD_RET_MAUDIO_OPTION, - EXYNOS_PAD_RET_JTAG_OPTION, - EXYNOS5420_PAD_RET_GPIO_OPTION, - EXYNOS5420_PAD_RET_UART_OPTION, - EXYNOS5420_PAD_RET_MMCA_OPTION, - EXYNOS5420_PAD_RET_MMCB_OPTION, - EXYNOS5420_PAD_RET_MMCC_OPTION, - EXYNOS5420_PAD_RET_HSI_OPTION, - EXYNOS_PAD_RET_EBIA_OPTION, - EXYNOS_PAD_RET_EBIB_OPTION, - EXYNOS5420_PAD_RET_SPI_OPTION, - EXYNOS5420_PAD_RET_DRAM_COREBLK_OPTION, - REG_TABLE_END, -}; - static int exynos_irq_set_wake(struct irq_data *data, unsigned int state) { const struct exynos_wkup_irq *wkup_irq; @@ -270,7 +228,6 @@ EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu"); EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu"); EXYNOS_PMU_IRQ(exynos4212_pmu_irq, "samsung,exynos4212-pmu"); EXYNOS_PMU_IRQ(exynos4412_pmu_irq, "samsung,exynos4412-pmu"); -EXYNOS_PMU_IRQ(exynos4415_pmu_irq, "samsung,exynos4415-pmu"); EXYNOS_PMU_IRQ(exynos5250_pmu_irq, "samsung,exynos5250-pmu"); EXYNOS_PMU_IRQ(exynos5420_pmu_irq, "samsung,exynos5420-pmu"); @@ -388,9 +345,9 @@ static void exynos5420_pm_prepare(void) if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) pmu_raw_writel(__pa_symbol(mcpm_entry_point), S5P_INFORM0); - tmp = pmu_raw_readl(EXYNOS5_ARM_L2_OPTION); - tmp &= ~EXYNOS5_USE_RETENTION; - pmu_raw_writel(tmp, EXYNOS5_ARM_L2_OPTION); + tmp = pmu_raw_readl(EXYNOS_L2_OPTION(0)); + tmp &= ~EXYNOS_L2_USE_RETENTION; + pmu_raw_writel(tmp, EXYNOS_L2_OPTION(0)); tmp = pmu_raw_readl(EXYNOS5420_SFR_AXI_CGDIS1); tmp |= EXYNOS5420_UFS; @@ -442,15 +399,6 @@ static int exynos5420_pm_suspend(void) return 0; } -static void exynos_pm_release_retention(void) -{ - unsigned int i; - - for (i = 0; (pm_data->release_ret_regs[i] != REG_TABLE_END); i++) - pmu_raw_writel(EXYNOS_WAKEUP_FROM_LOWPWR, - pm_data->release_ret_regs[i]); -} - static void exynos_pm_resume(void) { u32 cpuid = read_cpuid_part(); @@ -458,9 +406,6 @@ static void exynos_pm_resume(void) if (exynos_pm_central_resume()) goto early_wakeup; - /* For release retention */ - exynos_pm_release_retention(); - if (cpuid == ARM_CPU_PART_CORTEX_A9) scu_enable(S5P_VA_SCU); @@ -482,9 +427,6 @@ static void exynos3250_pm_resume(void) if (exynos_pm_central_resume()) goto early_wakeup; - /* For release retention */ - exynos_pm_release_retention(); - pmu_raw_writel(S5P_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION); if (call_firmware_op(resume) == -ENOSYS @@ -522,9 +464,6 @@ static void exynos5420_pm_resume(void) if (exynos_pm_central_resume()) goto early_wakeup; - /* For release retention */ - exynos_pm_release_retention(); - pmu_raw_writel(exynos_pmu_spare3, S5P_PMU_SPARE3); early_wakeup: @@ -637,7 +576,6 @@ static const struct platform_suspend_ops exynos_suspend_ops = { static const struct exynos_pm_data exynos3250_pm_data = { .wkup_irq = exynos3250_wkup_irq, .wake_disable_mask = ((0xFF << 8) | (0x1F << 1)), - .release_ret_regs = exynos3250_release_ret_regs, .pm_suspend = exynos_pm_suspend, .pm_resume = exynos3250_pm_resume, .pm_prepare = exynos3250_pm_prepare, @@ -647,7 +585,6 @@ static const struct exynos_pm_data exynos3250_pm_data = { static const struct exynos_pm_data exynos4_pm_data = { .wkup_irq = exynos4_wkup_irq, .wake_disable_mask = ((0xFF << 8) | (0x1F << 1)), - .release_ret_regs = exynos_release_ret_regs, .pm_suspend = exynos_pm_suspend, .pm_resume = exynos_pm_resume, .pm_prepare = exynos_pm_prepare, @@ -657,7 +594,6 @@ static const struct exynos_pm_data exynos4_pm_data = { static const struct exynos_pm_data exynos5250_pm_data = { .wkup_irq = exynos5250_wkup_irq, .wake_disable_mask = ((0xFF << 8) | (0x1F << 1)), - .release_ret_regs = exynos_release_ret_regs, .pm_suspend = exynos_pm_suspend, .pm_resume = exynos_pm_resume, .pm_prepare = exynos_pm_prepare, @@ -667,7 +603,6 @@ static const struct exynos_pm_data exynos5250_pm_data = { static const struct exynos_pm_data exynos5420_pm_data = { .wkup_irq = exynos5250_wkup_irq, .wake_disable_mask = (0x7F << 7) | (0x1F << 1), - .release_ret_regs = exynos5420_release_ret_regs, .pm_resume_prepare = exynos5420_prepare_pm_resume, .pm_resume = exynos5420_pm_resume, .pm_suspend = exynos5420_pm_suspend, diff --git a/arch/arm/mach-hisi/core.h b/arch/arm/mach-hisi/core.h index e883583a23f1..c58b68ab0cb6 100644 --- a/arch/arm/mach-hisi/core.h +++ b/arch/arm/mach-hisi/core.h @@ -15,5 +15,4 @@ extern void hix5hd2_set_cpu(int cpu, bool enable); extern void hix5hd2_cpu_die(unsigned int cpu); extern void hip01_set_cpu(int cpu, bool enable); -extern void hip01_cpu_die(unsigned int cpu); #endif diff --git a/arch/arm/mach-imx/devices/platform-flexcan.c b/arch/arm/mach-imx/devices/platform-flexcan.c index 55d61eaf63c6..8a1a2fc4ce10 100644 --- a/arch/arm/mach-imx/devices/platform-flexcan.c +++ b/arch/arm/mach-imx/devices/platform-flexcan.c @@ -19,15 +19,6 @@ #define imx_flexcan_data_entry(soc, _id, _hwid, _size) \ [_id] = imx_flexcan_data_entry_single(soc, _id, _hwid, _size) -#ifdef CONFIG_SOC_IMX25 -const struct imx_flexcan_data imx25_flexcan_data[] __initconst = { -#define imx25_flexcan_data_entry(_id, _hwid) \ - imx_flexcan_data_entry(MX25, _id, _hwid, SZ_16K) - imx25_flexcan_data_entry(0, 1), - imx25_flexcan_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX35 const struct imx_flexcan_data imx35_flexcan_data[] __initconst = { #define imx35_flexcan_data_entry(_id, _hwid) \ diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c index 3d039ef021e0..466c9ccc6675 100644 --- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c +++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c @@ -22,16 +22,6 @@ #define imx_sdhci_esdhc_imx_data_entry(soc, devid, id, hwid) \ [id] = imx_sdhci_esdhc_imx_data_entry_single(soc, devid, id, hwid) -#ifdef CONFIG_SOC_IMX25 -const struct imx_sdhci_esdhc_imx_data -imx25_sdhci_esdhc_imx_data[] __initconst = { -#define imx25_sdhci_esdhc_imx_data_entry(_id, _hwid) \ - imx_sdhci_esdhc_imx_data_entry(MX25, "sdhci-esdhc-imx25", _id, _hwid) - imx25_sdhci_esdhc_imx_data_entry(0, 1), - imx25_sdhci_esdhc_imx_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX35 const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[] __initconst = { diff --git a/arch/arm/mach-imx/mach-imx1.c b/arch/arm/mach-imx/mach-imx1.c index de5ab8d88549..3a8406e45b65 100644 --- a/arch/arm/mach-imx/mach-imx1.c +++ b/arch/arm/mach-imx/mach-imx1.c @@ -37,7 +37,6 @@ static const char * const imx1_dt_board_compat[] __initconst = { }; DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)") - .map_io = debug_ll_io_init, .init_early = imx1_init_early, .init_irq = imx1_init_irq, .dt_compat = imx1_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 7ba651a9b5b8..45e16bd7e2f2 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -31,7 +31,6 @@ #include <linux/regulator/machine.h> #include <linux/spi/l4f00242t03.h> -#include <media/soc_camera.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -53,8 +52,6 @@ #define SD1_CD IMX_GPIO_NR(2, 26) #define LCD_RESET IMX_GPIO_NR(1, 3) #define LCD_ENABLE IMX_GPIO_NR(1, 31) -#define CSI_PWRDWN IMX_GPIO_NR(4, 19) -#define CSI_RESET IMX_GPIO_NR(3, 6) static const int mx27pdk_pins[] __initconst = { /* UART1 */ @@ -144,21 +141,6 @@ static const int mx27pdk_pins[] __initconst = { PA30_PF_CONTRAST, LCD_ENABLE | GPIO_GPIO | GPIO_OUT, LCD_RESET | GPIO_GPIO | GPIO_OUT, - /* CSI */ - PB10_PF_CSI_D0, - PB11_PF_CSI_D1, - PB12_PF_CSI_D2, - PB13_PF_CSI_D3, - PB14_PF_CSI_D4, - PB15_PF_CSI_MCLK, - PB16_PF_CSI_PIXCLK, - PB17_PF_CSI_D5, - PB18_PF_CSI_D6, - PB19_PF_CSI_D7, - PB20_PF_CSI_VSYNC, - PB21_PF_CSI_HSYNC, - CSI_PWRDWN | GPIO_GPIO | GPIO_OUT, - CSI_RESET | GPIO_GPIO | GPIO_OUT, /* SSI4 */ PC16_PF_SSI4_FS, PC17_PF_SSI4_RXD, @@ -166,11 +148,6 @@ static const int mx27pdk_pins[] __initconst = { PC19_PF_SSI4_CLK, }; -static struct gpio mx27_3ds_camera_gpios[] = { - { CSI_PWRDWN, GPIOF_OUT_INIT_HIGH, "camera-power" }, - { CSI_RESET, GPIOF_OUT_INIT_HIGH, "camera-reset" }, -}; - static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -270,7 +247,6 @@ static struct regulator_init_data gpo_init = { static struct regulator_consumer_supply vmmc1_consumers[] = { REGULATOR_SUPPLY("vcore", "spi0.0"), - REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"), }; static struct regulator_init_data vmmc1_init = { @@ -299,22 +275,6 @@ static struct regulator_init_data vgen_init = { .consumer_supplies = vgen_consumers, }; -static struct regulator_consumer_supply vvib_consumers[] = { - REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"), -}; - -static struct regulator_init_data vvib_init = { - .constraints = { - .min_uV = 1300000, - .max_uV = 1300000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(vvib_consumers), - .consumer_supplies = vvib_consumers, -}; - static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = { { .id = MC13783_REG_VMMC1, @@ -328,9 +288,6 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = { }, { .id = MC13783_REG_GPO3, /* Turn on 3.3V */ .init_data = &gpo_init, - }, { - .id = MC13783_REG_VVIB, /* Power OV2640 */ - .init_data = &vvib_init, }, }; @@ -370,51 +327,6 @@ static const struct spi_imx_master spi2_pdata __initconst = { .num_chipselect = ARRAY_SIZE(spi2_chipselect), }; -static int mx27_3ds_camera_power(struct device *dev, int on) -{ - /* enable or disable the camera */ - pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE"); - gpio_set_value(CSI_PWRDWN, on ? 0 : 1); - - if (!on) - goto out; - - /* If enabled, give a reset impulse */ - gpio_set_value(CSI_RESET, 0); - msleep(20); - gpio_set_value(CSI_RESET, 1); - msleep(100); - -out: - return 0; -} - -static struct i2c_board_info mx27_3ds_i2c_camera = { - I2C_BOARD_INFO("ov2640", 0x30), -}; - -static struct regulator_bulk_data mx27_3ds_camera_regs[] = { - { .supply = "cmos_vcore" }, - { .supply = "cmos_2v8" }, -}; - -static struct soc_camera_link iclink_ov2640 = { - .bus_id = 0, - .board_info = &mx27_3ds_i2c_camera, - .i2c_adapter_id = 0, - .power = mx27_3ds_camera_power, - .regulators = mx27_3ds_camera_regs, - .num_regulators = ARRAY_SIZE(mx27_3ds_camera_regs), -}; - -static struct platform_device mx27_3ds_ov2640 = { - .name = "soc-camera-pdrv", - .id = 0, - .dev = { - .platform_data = &iclink_ov2640, - }, -}; - static struct imx_fb_videomode mx27_3ds_modes[] = { { /* 480x640 @ 60 Hz */ .mode = { @@ -471,14 +383,6 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { }, }; -static struct platform_device *devices[] __initdata = { - &mx27_3ds_ov2640, -}; - -static const struct mx2_camera_platform_data mx27_3ds_cam_pdata __initconst = { - .clk = 26000000, -}; - static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = { .bitrate = 100000, }; @@ -498,7 +402,6 @@ static void __init mx27pdk_init(void) imx27_add_spi_imx0(&spi1_pdata); imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data); - platform_add_devices(devices, ARRAY_SIZE(devices)); imx27_add_imx_fb(&mx27_3ds_fb_data); imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata); @@ -506,8 +409,6 @@ static void __init mx27pdk_init(void) static void __init mx27pdk_late_init(void) { - int ret; - mx27_3ds_sdhc1_enable_level_translator(); imx27_add_mxc_mmc(0, &sdhc1_pdata); @@ -531,14 +432,6 @@ static void __init mx27pdk_late_init(void) if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28))) pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n"); - ret = gpio_request_array(mx27_3ds_camera_gpios, - ARRAY_SIZE(mx27_3ds_camera_gpios)); - if (ret) { - pr_err("Failed to request camera gpios"); - iclink_ov2640.power = NULL; - } - - imx27_add_mx2_camera(&mx27_3ds_cam_pdata); imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); } diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 12b8a52c9cb4..558e5f8589cb 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -26,16 +26,12 @@ #include <linux/regulator/machine.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> -#include <linux/memblock.h> - -#include <media/soc_camera.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/memory.h> #include <asm/mach/map.h> -#include <asm/memblock.h> #include "3ds_debugboard.h" #include "common.h" @@ -137,23 +133,6 @@ static int mx31_3ds_pins[] = { MX31_PIN_HSYNC__HSYNC, MX31_PIN_FPSHIFT__FPSHIFT, MX31_PIN_CONTRAST__CONTRAST, - /* CSI */ - MX31_PIN_CSI_D6__CSI_D6, - MX31_PIN_CSI_D7__CSI_D7, - MX31_PIN_CSI_D8__CSI_D8, - MX31_PIN_CSI_D9__CSI_D9, - MX31_PIN_CSI_D10__CSI_D10, - MX31_PIN_CSI_D11__CSI_D11, - MX31_PIN_CSI_D12__CSI_D12, - MX31_PIN_CSI_D13__CSI_D13, - MX31_PIN_CSI_D14__CSI_D14, - MX31_PIN_CSI_D15__CSI_D15, - MX31_PIN_CSI_HSYNC__CSI_HSYNC, - MX31_PIN_CSI_MCLK__CSI_MCLK, - MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, - MX31_PIN_CSI_VSYNC__CSI_VSYNC, - MX31_PIN_CSI_D5__GPIO3_5, /* CMOS PWDN */ - IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_GPIO), /* CMOS reset */ /* SSI */ MX31_PIN_STXD4__STXD4, MX31_PIN_SRXD4__SRXD4, @@ -162,98 +141,6 @@ static int mx31_3ds_pins[] = { }; /* - * Camera support - */ -static phys_addr_t mx3_camera_base __initdata; -#define MX31_3DS_CAMERA_BUF_SIZE SZ_8M - -#define MX31_3DS_GPIO_CAMERA_PW IOMUX_TO_GPIO(MX31_PIN_CSI_D5) -#define MX31_3DS_GPIO_CAMERA_RST IOMUX_TO_GPIO(MX31_PIN_RI_DTE1) - -static struct gpio mx31_3ds_camera_gpios[] = { - { MX31_3DS_GPIO_CAMERA_PW, GPIOF_OUT_INIT_HIGH, "camera-power" }, - { MX31_3DS_GPIO_CAMERA_RST, GPIOF_OUT_INIT_HIGH, "camera-reset" }, -}; - -static const struct mx3_camera_pdata mx31_3ds_camera_pdata __initconst = { - .flags = MX3_CAMERA_DATAWIDTH_10, - .mclk_10khz = 2600, -}; - -static int __init mx31_3ds_init_camera(void) -{ - int dma, ret = -ENOMEM; - struct platform_device *pdev = - imx31_alloc_mx3_camera(&mx31_3ds_camera_pdata); - - if (IS_ERR(pdev)) - return PTR_ERR(pdev); - - if (!mx3_camera_base) - goto err; - - dma = dma_declare_coherent_memory(&pdev->dev, - mx3_camera_base, mx3_camera_base, - MX31_3DS_CAMERA_BUF_SIZE, - DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); - - if (!(dma & DMA_MEMORY_MAP)) - goto err; - - ret = platform_device_add(pdev); - if (ret) -err: - platform_device_put(pdev); - - return ret; -} - -static int mx31_3ds_camera_power(struct device *dev, int on) -{ - /* enable or disable the camera */ - pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE"); - gpio_set_value(MX31_3DS_GPIO_CAMERA_PW, on ? 0 : 1); - - if (!on) - goto out; - - /* If enabled, give a reset impulse */ - gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 0); - msleep(20); - gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 1); - msleep(100); - -out: - return 0; -} - -static struct i2c_board_info mx31_3ds_i2c_camera = { - I2C_BOARD_INFO("ov2640", 0x30), -}; - -static struct regulator_bulk_data mx31_3ds_camera_regs[] = { - { .supply = "cmos_vcore" }, - { .supply = "cmos_2v8" }, -}; - -static struct soc_camera_link iclink_ov2640 = { - .bus_id = 0, - .board_info = &mx31_3ds_i2c_camera, - .i2c_adapter_id = 0, - .power = mx31_3ds_camera_power, - .regulators = mx31_3ds_camera_regs, - .num_regulators = ARRAY_SIZE(mx31_3ds_camera_regs), -}; - -static struct platform_device mx31_3ds_ov2640 = { - .name = "soc-camera-pdrv", - .id = 0, - .dev = { - .platform_data = &iclink_ov2640, - }, -}; - -/* * FB support */ static const struct fb_videomode fb_modedb[] = { @@ -410,7 +297,6 @@ static struct regulator_init_data vmmc2_init = { static struct regulator_consumer_supply vmmc1_consumers[] = { REGULATOR_SUPPLY("vcore", "spi0.0"), - REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"), }; static struct regulator_init_data vmmc1_init = { @@ -441,22 +327,6 @@ static struct regulator_init_data vgen_init = { .consumer_supplies = vgen_consumers, }; -static struct regulator_consumer_supply vvib_consumers[] = { - REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"), -}; - -static struct regulator_init_data vvib_init = { - .constraints = { - .min_uV = 1300000, - .max_uV = 1300000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(vvib_consumers), - .consumer_supplies = vvib_consumers, -}; - static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = { { .id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */ @@ -480,9 +350,6 @@ static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = { }, { .id = MC13783_REG_VGEN, /* Power LCD */ .init_data = &vgen_init, - }, { - .id = MC13783_REG_VVIB, /* Power CMOS */ - .init_data = &vvib_init, }, }; @@ -688,10 +555,6 @@ static const struct imxi2c_platform_data mx31_3ds_i2c0_data __initconst = { .bitrate = 100000, }; -static struct platform_device *devices[] __initdata = { - &mx31_3ds_ov2640, -}; - static void __init mx31_3ds_init(void) { imx31_soc_init(); @@ -723,14 +586,10 @@ static void __init mx31_3ds_init(void) static void __init mx31_3ds_late(void) { - int ret; - mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); spi_register_board_info(mx31_3ds_spi_devs, ARRAY_SIZE(mx31_3ds_spi_devs)); - platform_add_devices(devices, ARRAY_SIZE(devices)); - mx31_3ds_usbotg_init(); if (otg_mode_host) { otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | @@ -751,17 +610,6 @@ static void __init mx31_3ds_late(void) "devices on the debug board are unusable.\n"); imx31_add_mxc_mmc(0, &sdhc1_pdata); - - /* CSI */ - /* Camera power: default - off */ - ret = gpio_request_array(mx31_3ds_camera_gpios, - ARRAY_SIZE(mx31_3ds_camera_gpios)); - if (ret) { - pr_err("Failed to request camera gpios"); - iclink_ov2640.power = NULL; - } - - mx31_3ds_init_camera(); } static void __init mx31_3ds_timer_init(void) @@ -769,13 +617,6 @@ static void __init mx31_3ds_timer_init(void) mx31_clocks_init(26000000); } -static void __init mx31_3ds_reserve(void) -{ - /* reserve MX31_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */ - mx3_camera_base = arm_memblock_steal(MX31_3DS_CAMERA_BUF_SIZE, - MX31_3DS_CAMERA_BUF_SIZE); -} - MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ .atag_offset = 0x100, @@ -785,6 +626,5 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") .init_time = mx31_3ds_timer_init, .init_machine = mx31_3ds_init, .init_late = mx31_3ds_late, - .reserve = mx31_3ds_reserve, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index c8c2e0956048..1c33a6ce326c 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -41,12 +41,9 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <asm/memblock.h> #include <video/platform_lcd.h> -#include <media/soc_camera.h> - #include "3ds_debugboard.h" #include "common.h" #include "devices-imx35.h" @@ -233,83 +230,10 @@ static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = { MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, MX35_PAD_D3_REV__IPU_DISPB_D3_REV, MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, - /* CSI */ - MX35_PAD_TX1__IPU_CSI_D_6, - MX35_PAD_TX0__IPU_CSI_D_7, - MX35_PAD_CSI_D8__IPU_CSI_D_8, - MX35_PAD_CSI_D9__IPU_CSI_D_9, - MX35_PAD_CSI_D10__IPU_CSI_D_10, - MX35_PAD_CSI_D11__IPU_CSI_D_11, - MX35_PAD_CSI_D12__IPU_CSI_D_12, - MX35_PAD_CSI_D13__IPU_CSI_D_13, - MX35_PAD_CSI_D14__IPU_CSI_D_14, - MX35_PAD_CSI_D15__IPU_CSI_D_15, - MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC, - MX35_PAD_CSI_MCLK__IPU_CSI_MCLK, - MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK, - MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC, /*PMIC IRQ*/ MX35_PAD_GPIO2_0__GPIO2_0, }; -/* - * Camera support -*/ -static phys_addr_t mx3_camera_base __initdata; -#define MX35_3DS_CAMERA_BUF_SIZE SZ_8M - -static const struct mx3_camera_pdata mx35_3ds_camera_pdata __initconst = { - .flags = MX3_CAMERA_DATAWIDTH_8, - .mclk_10khz = 2000, -}; - -static int __init imx35_3ds_init_camera(void) -{ - int dma, ret = -ENOMEM; - struct platform_device *pdev = - imx35_alloc_mx3_camera(&mx35_3ds_camera_pdata); - - if (IS_ERR(pdev)) - return PTR_ERR(pdev); - - if (!mx3_camera_base) - goto err; - - dma = dma_declare_coherent_memory(&pdev->dev, - mx3_camera_base, mx3_camera_base, - MX35_3DS_CAMERA_BUF_SIZE, - DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); - - if (!(dma & DMA_MEMORY_MAP)) - goto err; - - ret = platform_device_add(pdev); - if (ret) -err: - platform_device_put(pdev); - - return ret; -} - -static struct i2c_board_info mx35_3ds_i2c_camera = { - I2C_BOARD_INFO("ov2640", 0x30), -}; - -static struct soc_camera_link iclink_ov2640 = { - .bus_id = 0, - .board_info = &mx35_3ds_i2c_camera, - .i2c_adapter_id = 0, - .power = NULL, -}; - -static struct platform_device mx35_3ds_ov2640 = { - .name = "soc-camera-pdrv", - .id = 0, - .dev = { - .platform_data = &iclink_ov2640, - }, -}; - static struct regulator_consumer_supply sw1_consumers[] = { { .supply = "cpu_vcc", @@ -321,10 +245,6 @@ static struct regulator_consumer_supply vcam_consumers[] = { REGULATOR_SUPPLY("VDDA", "0-000a"), }; -static struct regulator_consumer_supply vaudio_consumers[] = { - REGULATOR_SUPPLY("cmos_vio", "soc-camera-pdrv.0"), -}; - static struct regulator_init_data sw1_init = { .constraints = { .name = "SW1", @@ -405,18 +325,6 @@ static struct regulator_init_data vvideo_init = { } }; -static struct regulator_init_data vaudio_init = { - .constraints = { - .name = "VAUDIO", - .min_uV = 2300000, - .max_uV = 3000000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .boot_on = 1 - }, - .num_consumer_supplies = ARRAY_SIZE(vaudio_consumers), - .consumer_supplies = vaudio_consumers, -}; - static struct regulator_init_data vcam_init = { .constraints = { .name = "VCAM", @@ -460,7 +368,6 @@ static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = { { .id = MC13892_VDIG, .init_data = &vdig_init }, { .id = MC13892_VUSB2, .init_data = &vusb2_init }, { .id = MC13892_VVIDEO, .init_data = &vvideo_init }, - { .id = MC13892_VAUDIO, .init_data = &vaudio_init }, { .id = MC13892_VCAM, .init_data = &vcam_init }, { .id = MC13892_VGEN1, .init_data = &vgen1_init }, { .id = MC13892_VGEN2, .init_data = &vgen2_init }, @@ -583,8 +490,6 @@ static void __init mx35_3ds_init(void) 0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds)); imx35_add_ipu_core(); - platform_device_register(&mx35_3ds_ov2640); - imx35_3ds_init_camera(); } static void __init mx35_3ds_late_init(void) @@ -607,13 +512,6 @@ static void __init mx35pdk_timer_init(void) mx35_clocks_init(); } -static void __init mx35_3ds_reserve(void) -{ - /* reserve MX35_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */ - mx3_camera_base = arm_memblock_steal(MX35_3DS_CAMERA_BUF_SIZE, - MX35_3DS_CAMERA_BUF_SIZE); -} - MACHINE_START(MX35_3DS, "Freescale MX35PDK") /* Maintainer: Freescale Semiconductor, Inc */ .atag_offset = 0x100, @@ -623,6 +521,5 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK") .init_time = mx35pdk_timer_init, .init_machine = mx35_3ds_init, .init_late = mx35_3ds_late_init, - .reserve = mx35_3ds_reserve, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 9f0f55b0422c..b787ba6897e4 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -31,17 +31,13 @@ #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> #include <linux/gfp.h> -#include <linux/memblock.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> -#include <media/soc_camera.h> - #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <asm/memblock.h> #include "common.h" #include "devices-imx31.h" @@ -150,22 +146,6 @@ static unsigned int pcm037_pins[] = { MX31_PIN_D3_SPL__D3_SPL, MX31_PIN_D3_CLS__D3_CLS, MX31_PIN_LCS0__GPIO3_23, - /* CSI */ - IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO), - MX31_PIN_CSI_D6__CSI_D6, - MX31_PIN_CSI_D7__CSI_D7, - MX31_PIN_CSI_D8__CSI_D8, - MX31_PIN_CSI_D9__CSI_D9, - MX31_PIN_CSI_D10__CSI_D10, - MX31_PIN_CSI_D11__CSI_D11, - MX31_PIN_CSI_D12__CSI_D12, - MX31_PIN_CSI_D13__CSI_D13, - MX31_PIN_CSI_D14__CSI_D14, - MX31_PIN_CSI_D15__CSI_D15, - MX31_PIN_CSI_HSYNC__CSI_HSYNC, - MX31_PIN_CSI_MCLK__CSI_MCLK, - MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, - MX31_PIN_CSI_VSYNC__CSI_VSYNC, /* GPIO */ IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO), /* OTG */ @@ -289,34 +269,6 @@ static struct at24_platform_data board_eeprom = { .flags = AT24_FLAG_ADDR16, }; -static int pcm037_camera_power(struct device *dev, int on) -{ - /* disable or enable the camera in X7 or X8 PCM970 connector */ - gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on); - return 0; -} - -static struct i2c_board_info pcm037_i2c_camera[] = { - { - I2C_BOARD_INFO("mt9t031", 0x5d), - }, { - I2C_BOARD_INFO("mt9v022", 0x48), - }, -}; - -static struct soc_camera_link iclink_mt9v022 = { - .bus_id = 0, /* Must match with the camera ID */ - .board_info = &pcm037_i2c_camera[1], - .i2c_adapter_id = 2, -}; - -static struct soc_camera_link iclink_mt9t031 = { - .bus_id = 0, /* Must match with the camera ID */ - .power = pcm037_camera_power, - .board_info = &pcm037_i2c_camera[0], - .i2c_adapter_id = 2, -}; - static struct i2c_board_info pcm037_i2c_devices[] = { { I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ @@ -326,22 +278,6 @@ static struct i2c_board_info pcm037_i2c_devices[] = { } }; -static struct platform_device pcm037_mt9t031 = { - .name = "soc-camera-pdrv", - .id = 0, - .dev = { - .platform_data = &iclink_mt9t031, - }, -}; - -static struct platform_device pcm037_mt9v022 = { - .name = "soc-camera-pdrv", - .id = 1, - .dev = { - .platform_data = &iclink_mt9v022, - }, -}; - /* Not connected by default */ #ifdef PCM970_SDHC_RW_SWITCH static int pcm970_sdhc1_get_ro(struct device *dev) @@ -403,42 +339,9 @@ static const struct imxmmc_platform_data sdhc_pdata __initconst = { .exit = pcm970_sdhc1_exit, }; -struct mx3_camera_pdata camera_pdata __initdata = { - .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10, - .mclk_10khz = 2000, -}; - -static phys_addr_t mx3_camera_base __initdata; -#define MX3_CAMERA_BUF_SIZE SZ_4M - -static int __init pcm037_init_camera(void) -{ - int dma, ret = -ENOMEM; - struct platform_device *pdev = imx31_alloc_mx3_camera(&camera_pdata); - - if (IS_ERR(pdev)) - return PTR_ERR(pdev); - - dma = dma_declare_coherent_memory(&pdev->dev, - mx3_camera_base, mx3_camera_base, - MX3_CAMERA_BUF_SIZE, - DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); - if (!(dma & DMA_MEMORY_MAP)) - goto err; - - ret = platform_device_add(pdev); - if (ret) -err: - platform_device_put(pdev); - - return ret; -} - static struct platform_device *devices[] __initdata = { &pcm037_flash, &pcm037_sram_device, - &pcm037_mt9t031, - &pcm037_mt9v022, }; static const struct fb_videomode fb_modedb[] = { @@ -651,13 +554,6 @@ static void __init pcm037_timer_init(void) mx31_clocks_init(26000000); } -static void __init pcm037_reserve(void) -{ - /* reserve 4 MiB for mx3-camera */ - mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE, - MX3_CAMERA_BUF_SIZE); -} - static void __init pcm037_init_late(void) { int ret; @@ -677,16 +573,6 @@ static void __init pcm037_init_late(void) imx31_add_mxc_mmc(0, &sdhc_pdata); - /* CSI */ - /* Camera power: default - off */ - ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power"); - if (!ret) - gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1); - else - iclink_mt9t031.power = NULL; - - pcm037_init_camera(); - pcm970_sja1000_resources[1].start = gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105))); pcm970_sja1000_resources[1].end = @@ -699,7 +585,6 @@ static void __init pcm037_init_late(void) MACHINE_START(PCM037, "Phytec Phycore pcm037") /* Maintainer: Pengutronix */ .atag_offset = 0x100, - .reserve = pcm037_reserve, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c index 699157759120..c03bf28d8bbc 100644 --- a/arch/arm/mach-imx/mmdc.c +++ b/arch/arm/mach-imx/mmdc.c @@ -60,7 +60,6 @@ #define to_mmdc_pmu(p) container_of(p, struct mmdc_pmu, pmu) -static enum cpuhp_state cpuhp_mmdc_state; static int ddr_type; struct fsl_mmdc_devtype_data { @@ -82,6 +81,7 @@ static const struct of_device_id imx_mmdc_dt_ids[] = { #ifdef CONFIG_PERF_EVENTS +static enum cpuhp_state cpuhp_mmdc_state; static DEFINE_IDA(mmdc_ida); PMU_EVENT_ATTR_STRING(total-cycles, mmdc_pmu_total_cycles, "event=0x00") diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c index 2e895a82a6eb..922d49175cb4 100644 --- a/arch/arm/mach-imx/mx31moboard-marxbot.c +++ b/arch/arm/mach-imx/mx31moboard-marxbot.c @@ -24,8 +24,6 @@ #include <linux/usb/otg.h> -#include <media/soc_camera.h> - #include "common.h" #include "devices-imx31.h" #include "ehci.h" @@ -39,17 +37,6 @@ static unsigned int marxbot_pins[] = { MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0, MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, - /* CSI */ - MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7, - MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9, - MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11, - MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13, - MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15, - MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK, - MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC, - MX31_PIN_CSI_D4__GPIO3_4, MX31_PIN_CSI_D5__GPIO3_5, - MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1, - MX31_PIN_TXD2__GPIO1_28, /* dsPIC resets */ MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22, /*battery detection */ @@ -143,82 +130,6 @@ static struct spi_board_info marxbot_spi_board_info[] __initdata = { }, }; -#define TURRETCAM_POWER IOMUX_TO_GPIO(MX31_PIN_GPIO3_1) -#define BASECAM_POWER IOMUX_TO_GPIO(MX31_PIN_CSI_D5) -#define TURRETCAM_RST_B IOMUX_TO_GPIO(MX31_PIN_GPIO3_0) -#define BASECAM_RST_B IOMUX_TO_GPIO(MX31_PIN_CSI_D4) -#define CAM_CHOICE IOMUX_TO_GPIO(MX31_PIN_TXD2) - -static int marxbot_basecam_power(struct device *dev, int on) -{ - gpio_set_value(BASECAM_POWER, !on); - return 0; -} - -static int marxbot_basecam_reset(struct device *dev) -{ - gpio_set_value(BASECAM_RST_B, 0); - udelay(100); - gpio_set_value(BASECAM_RST_B, 1); - return 0; -} - -static struct i2c_board_info marxbot_i2c_devices[] = { - { - I2C_BOARD_INFO("mt9t031", 0x5d), - }, -}; - -static struct soc_camera_link base_iclink = { - .bus_id = 0, /* Must match with the camera ID */ - .power = marxbot_basecam_power, - .reset = marxbot_basecam_reset, - .board_info = &marxbot_i2c_devices[0], - .i2c_adapter_id = 0, -}; - -static struct platform_device marxbot_camera[] = { - { - .name = "soc-camera-pdrv", - .id = 0, - .dev = { - .platform_data = &base_iclink, - }, - }, -}; - -static struct platform_device *marxbot_cameras[] __initdata = { - &marxbot_camera[0], -}; - -static int __init marxbot_cam_init(void) -{ - int ret = gpio_request(CAM_CHOICE, "cam-choice"); - if (ret) - return ret; - gpio_direction_output(CAM_CHOICE, 0); - - ret = gpio_request(BASECAM_RST_B, "basecam-reset"); - if (ret) - return ret; - gpio_direction_output(BASECAM_RST_B, 1); - ret = gpio_request(BASECAM_POWER, "basecam-standby"); - if (ret) - return ret; - gpio_direction_output(BASECAM_POWER, 0); - - ret = gpio_request(TURRETCAM_RST_B, "turretcam-reset"); - if (ret) - return ret; - gpio_direction_output(TURRETCAM_RST_B, 1); - ret = gpio_request(TURRETCAM_POWER, "turretcam-standby"); - if (ret) - return ret; - gpio_direction_output(TURRETCAM_POWER, 0); - - return 0; -} - #define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) #define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) #define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) @@ -356,9 +267,6 @@ void __init mx31moboard_marxbot_init(void) spi_register_board_info(marxbot_spi_board_info, ARRAY_SIZE(marxbot_spi_board_info)); - marxbot_cam_init(); - platform_add_devices(marxbot_cameras, ARRAY_SIZE(marxbot_cameras)); - /* battery present pin */ gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present"); gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0)); diff --git a/arch/arm/mach-imx/mx31moboard-smartbot.c b/arch/arm/mach-imx/mx31moboard-smartbot.c index 89fc35a64448..5cdd7abce515 100644 --- a/arch/arm/mach-imx/mx31moboard-smartbot.c +++ b/arch/arm/mach-imx/mx31moboard-smartbot.c @@ -23,8 +23,6 @@ #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> -#include <media/soc_camera.h> - #include "board-mx31moboard.h" #include "common.h" #include "devices-imx31.h" @@ -37,16 +35,6 @@ static unsigned int smartbot_pins[] = { /* UART1 */ MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, - /* CSI */ - MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5, - MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7, - MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9, - MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11, - MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13, - MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15, - MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK, - MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC, - MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1, /* ENABLES */ MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, @@ -56,65 +44,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -#define CAM_POWER IOMUX_TO_GPIO(MX31_PIN_GPIO3_1) -#define CAM_RST_B IOMUX_TO_GPIO(MX31_PIN_GPIO3_0) - -static int smartbot_cam_power(struct device *dev, int on) -{ - gpio_set_value(CAM_POWER, !on); - return 0; -} - -static int smartbot_cam_reset(struct device *dev) -{ - gpio_set_value(CAM_RST_B, 0); - udelay(100); - gpio_set_value(CAM_RST_B, 1); - return 0; -} - -static struct i2c_board_info smartbot_i2c_devices[] = { - { - I2C_BOARD_INFO("mt9t031", 0x5d), - }, -}; - -static struct soc_camera_link base_iclink = { - .bus_id = 0, /* Must match with the camera ID */ - .power = smartbot_cam_power, - .reset = smartbot_cam_reset, - .board_info = &smartbot_i2c_devices[0], - .i2c_adapter_id = 0, -}; - -static struct platform_device smartbot_camera[] = { - { - .name = "soc-camera-pdrv", - .id = 0, - .dev = { - .platform_data = &base_iclink, - }, - }, -}; - -static struct platform_device *smartbot_cameras[] __initdata = { - &smartbot_camera[0], -}; - -static int __init smartbot_cam_init(void) -{ - int ret = gpio_request(CAM_RST_B, "cam-reset"); - if (ret) - return ret; - gpio_direction_output(CAM_RST_B, 1); - ret = gpio_request(CAM_POWER, "cam-standby"); - if (ret) - return ret; - gpio_direction_output(CAM_POWER, 0); - - return 0; -} - static const struct fsl_usb2_platform_data usb_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_ULPI, @@ -201,7 +130,4 @@ void __init mx31moboard_smartbot_init(int board) } smartbot_resets_init(); - - smartbot_cam_init(); - platform_add_devices(smartbot_cameras, ARRAY_SIZE(smartbot_cameras)); } diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig index 24bd64dabdfc..554357035f30 100644 --- a/arch/arm/mach-keystone/Kconfig +++ b/arch/arm/mach-keystone/Kconfig @@ -4,6 +4,7 @@ config ARCH_KEYSTONE select ARM_GIC select HAVE_ARM_ARCH_TIMER select KEYSTONE_TIMER + select ARCH_HAS_RESET_CONTROLLER select ARM_ERRATA_798181 if SMP select COMMON_CLK_KEYSTONE select ARCH_SUPPORTS_BIG_ENDIAN diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index 13a7d72ee0c4..81ff4327a962 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -29,7 +29,7 @@ struct pcie_port { u8 root_bus_nr; void __iomem *base; spinlock_t conf_lock; - char mem_space_name[16]; + char mem_space_name[20]; struct resource res; }; diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index 46c742d3bd41..e62273aacb43 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -184,3 +184,78 @@ const struct smp_operations armada_xp_smp_ops __initconst = { CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp", &armada_xp_smp_ops); + +#define MV98DX3236_CPU_RESUME_CTRL_REG 0x08 +#define MV98DX3236_CPU_RESUME_ADDR_REG 0x04 + +static const struct of_device_id of_mv98dx3236_resume_table[] = { + { + .compatible = "marvell,98dx3336-resume-ctrl", + }, + { /* end of list */ }, +}; + +static int mv98dx3236_resume_set_cpu_boot_addr(int hw_cpu, void *boot_addr) +{ + struct device_node *np; + void __iomem *base; + WARN_ON(hw_cpu != 1); + + np = of_find_matching_node(NULL, of_mv98dx3236_resume_table); + if (!np) + return -ENODEV; + + base = of_io_request_and_map(np, 0, of_node_full_name(np)); + of_node_put(np); + if (IS_ERR(base)) + return PTR_ERR(base); + + writel(0, base + MV98DX3236_CPU_RESUME_CTRL_REG); + writel(virt_to_phys(boot_addr), base + MV98DX3236_CPU_RESUME_ADDR_REG); + + iounmap(base); + + return 0; +} + +static int mv98dx3236_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + int ret, hw_cpu; + + hw_cpu = cpu_logical_map(cpu); + set_secondary_cpu_clock(hw_cpu); + mv98dx3236_resume_set_cpu_boot_addr(hw_cpu, + armada_xp_secondary_startup); + + /* + * This is needed to wake up CPUs in the offline state after + * using CPU hotplug. + */ + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + /* + * This is needed to take secondary CPUs out of reset on the + * initial boot. + */ + ret = mvebu_cpu_reset_deassert(hw_cpu); + if (ret) { + pr_warn("unable to boot CPU: %d\n", ret); + return ret; + } + + return 0; +} + +static const struct smp_operations mv98dx3236_smp_ops __initconst = { + .smp_init_cpus = armada_xp_smp_init_cpus, + .smp_prepare_cpus = armada_xp_smp_prepare_cpus, + .smp_boot_secondary = mv98dx3236_boot_secondary, + .smp_secondary_init = armada_xp_secondary_init, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = armada_xp_cpu_die, + .cpu_kill = armada_xp_cpu_kill, +#endif +}; + +CPU_METHOD_OF_DECLARE(mv98dx3236_smp, "marvell,98dx3236-smp", + &mv98dx3236_smp_ops); diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 4f5fd4a084c0..43e3e188f521 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -720,26 +720,6 @@ EXPORT_SYMBOL(clk_get_parent); * OMAP specific clock functions shared between omap1 and omap2 */ -int __initdata mpurate; - -/* - * By default we use the rate set by the bootloader. - * You can override this with mpurate= cmdline option. - */ -static int __init omap_clk_setup(char *str) -{ - get_option(&str, &mpurate); - - if (!mpurate) - return 1; - - if (mpurate < 1000) - mpurate *= 1000000; - - return 1; -} -__setup("mpurate=", omap_clk_setup); - /* Used for clocks that always have same value as the parent clock */ unsigned long followparent_recalc(struct clk *clk) { diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 1e4918a3a5ee..f2d1be211723 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -173,8 +173,6 @@ struct clk_functions { void (*clk_disable_unused)(struct clk *clk); }; -extern int mpurate; - extern int clk_init(struct clk_functions *custom_clocks); extern void clk_preinit(struct clk *clk); extern int clk_register(struct clk *clk); diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index f6ba589cd312..c821c1d5610e 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -32,7 +32,6 @@ #include "soc.h" #define OMAP1_DMA_BASE (0xfffed800) -#define OMAP1_LOGICAL_DMA_CH_COUNT 17 static u32 enable_1510_mode; @@ -348,8 +347,6 @@ static int __init omap1_system_dma_init(void) goto exit_iounmap; } - d->lch_count = OMAP1_LOGICAL_DMA_CH_COUNT; - /* Valid attributes for omap1 plus processors */ if (cpu_is_omap15xx()) d->dev_caps = ENABLE_1510_MODE; @@ -366,13 +363,14 @@ static int __init omap1_system_dma_init(void) d->dev_caps |= CLEAR_CSR_ON_READ; d->dev_caps |= IS_WORD_16; - if (cpu_is_omap15xx()) - d->chan_count = 9; - else if (cpu_is_omap16xx() || cpu_is_omap7xx()) { - if (!(d->dev_caps & ENABLE_1510_MODE)) - d->chan_count = 16; + /* available logical channels */ + if (cpu_is_omap15xx()) { + d->lch_count = 9; + } else { + if (d->dev_caps & ENABLE_1510_MODE) + d->lch_count = 9; else - d->chan_count = 9; + d->lch_count = 16; } p = dma_plat_info; diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h index a7c5559caef2..eb76628ff843 100644 --- a/arch/arm/mach-omap1/include/mach/usb.h +++ b/arch/arm/mach-omap1/include/mach/usb.h @@ -10,8 +10,6 @@ #include <linux/platform_data/usb-omap1.h> -void omap_otg_init(struct omap_usb_config *config); - #if IS_ENABLED(CONFIG_USB) void omap1_usb_init(struct omap_usb_config *pdata); #else diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 2506e598a067..455e2cf2866d 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -1,5 +1,5 @@ /* - * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx + * Platform level USB initialization for FS USB OTG controller on omap1 * * Copyright (C) 2004 Texas Instruments, Inc. * @@ -58,11 +58,12 @@ #ifdef CONFIG_ARCH_OMAP_OTG -void __init +static void __init omap_otg_init(struct omap_usb_config *config) { u32 syscon; int alt_pingroup = 0; + u16 w; /* NOTE: no bus or clock setup (yet?) */ @@ -87,39 +88,35 @@ omap_otg_init(struct omap_usb_config *config) if (config->otg) syscon |= OTG_EN; #endif - if (cpu_class_is_omap1()) - pr_debug("USB_TRANSCEIVER_CTRL = %03x\n", - omap_readl(USB_TRANSCEIVER_CTRL)); + pr_debug("USB_TRANSCEIVER_CTRL = %03x\n", + omap_readl(USB_TRANSCEIVER_CTRL)); pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2)); omap_writel(syscon, OTG_SYSCON_2); printk("USB: hmc %d", config->hmc_mode); if (!alt_pingroup) - printk(", usb2 alt %d wires", config->pins[2]); + pr_cont(", usb2 alt %d wires", config->pins[2]); else if (config->pins[0]) - printk(", usb0 %d wires%s", config->pins[0], + pr_cont(", usb0 %d wires%s", config->pins[0], is_usb0_device(config) ? " (dev)" : ""); if (config->pins[1]) - printk(", usb1 %d wires", config->pins[1]); + pr_cont(", usb1 %d wires", config->pins[1]); if (!alt_pingroup && config->pins[2]) - printk(", usb2 %d wires", config->pins[2]); + pr_cont(", usb2 %d wires", config->pins[2]); if (config->otg) - printk(", Mini-AB on usb%d", config->otg - 1); - printk("\n"); + pr_cont(", Mini-AB on usb%d", config->otg - 1); + pr_cont("\n"); - if (cpu_class_is_omap1()) { - u16 w; + /* leave USB clocks/controllers off until needed */ + w = omap_readw(ULPD_SOFT_REQ); + w &= ~SOFT_USB_CLK_REQ; + omap_writew(w, ULPD_SOFT_REQ); - /* leave USB clocks/controllers off until needed */ - w = omap_readw(ULPD_SOFT_REQ); - w &= ~SOFT_USB_CLK_REQ; - omap_writew(w, ULPD_SOFT_REQ); + w = omap_readw(ULPD_CLOCK_CTRL); + w &= ~USB_MCLK_EN; + w |= DIS_USB_PVCI_CLK; + omap_writew(w, ULPD_CLOCK_CTRL); - w = omap_readw(ULPD_CLOCK_CTRL); - w &= ~USB_MCLK_EN; - w |= DIS_USB_PVCI_CLK; - omap_writew(w, ULPD_CLOCK_CTRL); - } syscon = omap_readl(OTG_SYSCON_1); syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN; @@ -166,7 +163,7 @@ omap_otg_init(struct omap_usb_config *config) } #else -void omap_otg_init(struct omap_usb_config *config) {} +static void omap_otg_init(struct omap_usb_config *config) {} #endif #if IS_ENABLED(CONFIG_USB_OMAP) @@ -573,13 +570,13 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) printk("USB: hmc %d", config->hmc_mode); if (config->pins[0]) - printk(", usb0 %d wires%s", config->pins[0], + pr_cont(", usb0 %d wires%s", config->pins[0], is_usb0_device(config) ? " (dev)" : ""); if (config->pins[1]) - printk(", usb1 %d wires", config->pins[1]); + pr_cont(", usb1 %d wires", config->pins[1]); if (config->pins[2]) - printk(", usb2 %d wires", config->pins[2]); - printk("\n"); + pr_cont(", usb2 %d wires", config->pins[2]); + pr_cont("\n"); /* use DPLL for 48 MHz function clock */ pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL), diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 469894082fea..093458b62c8d 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -7,7 +7,7 @@ ccflags-y := -I$(srctree)/$(src)/include \ # Common support obj-y := id.o io.o control.o devices.o fb.o timer.o pm.o \ - common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ + common.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ omap_device.o omap-headsmp.o sram.o drm.o hwmod-common = omap_hwmod.o omap_hwmod_reset.o \ diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 36d9943205ca..dc9e34e670a2 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -304,7 +304,7 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)") .init_late = am43xx_init_late, .init_irq = omap_gic_of_init, .init_machine = omap_generic_init, - .init_time = omap4_local_timer_init, + .init_time = omap3_gptimer_timer_init, .dt_compat = am43_boards_compat, .restart = omap44xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index d058125876d8..1270afdcacdf 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -78,8 +78,6 @@ int __init omap2_clk_setup_ll_ops(void) * OMAP2+ specific clock functions */ -/* Private functions */ - /* Public functions */ /** @@ -112,65 +110,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw) } } -static int __initdata mpurate; - -/* - * By default we use the rate set by the bootloader. - * You can override this with mpurate= cmdline option. - */ -static int __init omap_clk_setup(char *str) -{ - get_option(&str, &mpurate); - - if (!mpurate) - return 1; - - if (mpurate < 1000) - mpurate *= 1000000; - - return 1; -} -__setup("mpurate=", omap_clk_setup); - -/** - * omap2_clk_print_new_rates - print summary of current clock tree rates - * @hfclkin_ck_name: clk name for the off-chip HF oscillator - * @core_ck_name: clk name for the on-chip CORE_CLK - * @mpu_ck_name: clk name for the ARM MPU clock - * - * Prints a short message to the console with the HFCLKIN oscillator - * rate, the rate of the CORE clock, and the rate of the ARM MPU clock. - * Called by the boot-time MPU rate switching code. XXX This is intended - * to be handled by the OPP layer code in the near future and should be - * removed from the clock code. No return value. - */ -void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name, - const char *core_ck_name, - const char *mpu_ck_name) -{ - struct clk *hfclkin_ck, *core_ck, *mpu_ck; - unsigned long hfclkin_rate; - - mpu_ck = clk_get(NULL, mpu_ck_name); - if (WARN(IS_ERR(mpu_ck), "clock: failed to get %s.\n", mpu_ck_name)) - return; - - core_ck = clk_get(NULL, core_ck_name); - if (WARN(IS_ERR(core_ck), "clock: failed to get %s.\n", core_ck_name)) - return; - - hfclkin_ck = clk_get(NULL, hfclkin_ck_name); - if (WARN(IS_ERR(hfclkin_ck), "Failed to get %s.\n", hfclkin_ck_name)) - return; - - hfclkin_rate = clk_get_rate(hfclkin_ck); - - pr_info("Switched to new clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n", - (hfclkin_rate / 1000000), ((hfclkin_rate / 100000) % 10), - (clk_get_rate(core_ck) / 1000000), - (clk_get_rate(mpu_ck) / 1000000)); -} - /** * ti_clk_init_features - init clock features struct for the SoC * diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 67da640ba1c7..4e66295dca25 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -64,10 +64,6 @@ #define OMAP4XXX_EN_DPLL_FRBYPASS 0x6 #define OMAP4XXX_EN_DPLL_LOCKED 0x7 -void omap2_clk_print_new_rates(const char *hfclkin_ck_name, - const char *core_ck_name, - const char *mpu_ck_name); - extern u16 cpu_mask; extern const struct clkops clkops_omap2_dflt_wait; diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index e71cca0950e9..8fa01c0ecdb2 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -46,8 +46,6 @@ #define DISPC_CONTROL3 0x0848 #define DISPC_IRQSTATUS 0x0018 -#define DSS_SYSCONFIG 0x10 -#define DSS_SYSSTATUS 0x14 #define DSS_CONTROL 0x40 #define DSS_SDI_CONTROL 0x44 #define DSS_PLL_CONTROL 0x48 @@ -76,36 +74,6 @@ static struct platform_device omap_display_device = { }, }; -struct omap_dss_hwmod_data { - const char *oh_name; - const char *dev_name; - const int id; -}; - -static const struct omap_dss_hwmod_data omap2_dss_hwmod_data[] __initconst = { - { "dss_core", "omapdss_dss", -1 }, - { "dss_dispc", "omapdss_dispc", -1 }, - { "dss_rfbi", "omapdss_rfbi", -1 }, - { "dss_venc", "omapdss_venc", -1 }, -}; - -static const struct omap_dss_hwmod_data omap3_dss_hwmod_data[] __initconst = { - { "dss_core", "omapdss_dss", -1 }, - { "dss_dispc", "omapdss_dispc", -1 }, - { "dss_rfbi", "omapdss_rfbi", -1 }, - { "dss_venc", "omapdss_venc", -1 }, - { "dss_dsi1", "omapdss_dsi", 0 }, -}; - -static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = { - { "dss_core", "omapdss_dss", -1 }, - { "dss_dispc", "omapdss_dispc", -1 }, - { "dss_rfbi", "omapdss_rfbi", -1 }, - { "dss_dsi1", "omapdss_dsi", 0 }, - { "dss_dsi2", "omapdss_dsi", 1 }, - { "dss_hdmi", "omapdss_hdmi", -1 }, -}; - #define OMAP4_DSIPHY_SYSCON_OFFSET 0x78 static struct regmap *omap4_dsi_mux_syscon; @@ -162,104 +130,6 @@ static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput) return omap_pm_set_min_bus_tput(dev, OCP_INITIATOR_AGENT, tput); } -static struct platform_device *create_dss_pdev(const char *pdev_name, - int pdev_id, const char *oh_name, void *pdata, int pdata_len, - struct platform_device *parent) -{ - struct platform_device *pdev; - struct omap_device *od; - struct omap_hwmod *ohs[1]; - struct omap_hwmod *oh; - int r; - - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up %s\n", oh_name); - r = -ENODEV; - goto err; - } - - pdev = platform_device_alloc(pdev_name, pdev_id); - if (!pdev) { - pr_err("Could not create pdev for %s\n", pdev_name); - r = -ENOMEM; - goto err; - } - - if (parent != NULL) - pdev->dev.parent = &parent->dev; - - if (pdev->id != -1) - dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); - else - dev_set_name(&pdev->dev, "%s", pdev->name); - - ohs[0] = oh; - od = omap_device_alloc(pdev, ohs, 1); - if (IS_ERR(od)) { - pr_err("Could not alloc omap_device for %s\n", pdev_name); - r = -ENOMEM; - goto err; - } - - r = platform_device_add_data(pdev, pdata, pdata_len); - if (r) { - pr_err("Could not set pdata for %s\n", pdev_name); - goto err; - } - - r = omap_device_register(pdev); - if (r) { - pr_err("Could not register omap_device for %s\n", pdev_name); - goto err; - } - - return pdev; - -err: - return ERR_PTR(r); -} - -static struct platform_device *create_simple_dss_pdev(const char *pdev_name, - int pdev_id, void *pdata, int pdata_len, - struct platform_device *parent) -{ - struct platform_device *pdev; - int r; - - pdev = platform_device_alloc(pdev_name, pdev_id); - if (!pdev) { - pr_err("Could not create pdev for %s\n", pdev_name); - r = -ENOMEM; - goto err; - } - - if (parent != NULL) - pdev->dev.parent = &parent->dev; - - if (pdev->id != -1) - dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); - else - dev_set_name(&pdev->dev, "%s", pdev->name); - - r = platform_device_add_data(pdev, pdata, pdata_len); - if (r) { - pr_err("Could not set pdata for %s\n", pdev_name); - goto err; - } - - r = platform_device_add(pdev); - if (r) { - pr_err("Could not register platform_device for %s\n", pdev_name); - goto err; - } - - return pdev; - -err: - return ERR_PTR(r); -} - static enum omapdss_version __init omap_display_get_version(void) { if (cpu_is_omap24xx()) @@ -293,132 +163,6 @@ static enum omapdss_version __init omap_display_get_version(void) return OMAPDSS_VER_UNKNOWN; } -int __init omap_display_init(struct omap_dss_board_info *board_data) -{ - int r = 0; - struct platform_device *pdev; - int i, oh_count; - const struct omap_dss_hwmod_data *curr_dss_hwmod; - struct platform_device *dss_pdev; - enum omapdss_version ver; - - /* create omapdss device */ - - ver = omap_display_get_version(); - - if (ver == OMAPDSS_VER_UNKNOWN) { - pr_err("DSS not supported on this SoC\n"); - return -ENODEV; - } - - board_data->version = ver; - board_data->dsi_enable_pads = omap_dsi_enable_pads; - board_data->dsi_disable_pads = omap_dsi_disable_pads; - board_data->set_min_bus_tput = omap_dss_set_min_bus_tput; - - omap_display_device.dev.platform_data = board_data; - - r = platform_device_register(&omap_display_device); - if (r < 0) { - pr_err("Unable to register omapdss device\n"); - return r; - } - - /* create devices for dss hwmods */ - - if (cpu_is_omap24xx()) { - curr_dss_hwmod = omap2_dss_hwmod_data; - oh_count = ARRAY_SIZE(omap2_dss_hwmod_data); - } else if (cpu_is_omap34xx()) { - curr_dss_hwmod = omap3_dss_hwmod_data; - oh_count = ARRAY_SIZE(omap3_dss_hwmod_data); - } else { - curr_dss_hwmod = omap4_dss_hwmod_data; - oh_count = ARRAY_SIZE(omap4_dss_hwmod_data); - } - - /* - * First create the pdev for dss_core, which is used as a parent device - * by the other dss pdevs. Note: dss_core has to be the first item in - * the hwmod list. - */ - dss_pdev = create_dss_pdev(curr_dss_hwmod[0].dev_name, - curr_dss_hwmod[0].id, - curr_dss_hwmod[0].oh_name, - board_data, sizeof(*board_data), - NULL); - - if (IS_ERR(dss_pdev)) { - pr_err("Could not build omap_device for %s\n", - curr_dss_hwmod[0].oh_name); - - return PTR_ERR(dss_pdev); - } - - for (i = 1; i < oh_count; i++) { - pdev = create_dss_pdev(curr_dss_hwmod[i].dev_name, - curr_dss_hwmod[i].id, - curr_dss_hwmod[i].oh_name, - board_data, sizeof(*board_data), - dss_pdev); - - if (IS_ERR(pdev)) { - pr_err("Could not build omap_device for %s\n", - curr_dss_hwmod[i].oh_name); - - return PTR_ERR(pdev); - } - } - - /* Create devices for DPI and SDI */ - - pdev = create_simple_dss_pdev("omapdss_dpi", 0, - board_data, sizeof(*board_data), dss_pdev); - if (IS_ERR(pdev)) { - pr_err("Could not build platform_device for omapdss_dpi\n"); - return PTR_ERR(pdev); - } - - if (cpu_is_omap34xx()) { - pdev = create_simple_dss_pdev("omapdss_sdi", 0, - board_data, sizeof(*board_data), dss_pdev); - if (IS_ERR(pdev)) { - pr_err("Could not build platform_device for omapdss_sdi\n"); - return PTR_ERR(pdev); - } - } - - /* create DRM device */ - r = omap_init_drm(); - if (r < 0) { - pr_err("Unable to register omapdrm device\n"); - return r; - } - - /* create vrfb device */ - r = omap_init_vrfb(); - if (r < 0) { - pr_err("Unable to register omapvrfb device\n"); - return r; - } - - /* create FB device */ - r = omap_init_fb(); - if (r < 0) { - pr_err("Unable to register omapfb device\n"); - return r; - } - - /* create V4L2 display device */ - r = omap_init_vout(); - if (r < 0) { - pr_err("Unable to register omap_vout device\n"); - return r; - } - - return 0; -} - static void dispc_disable_outputs(void) { u32 v, irq_mask = 0; @@ -573,7 +317,7 @@ static const char * const omapdss_compat_names[] __initconst = { "ti,dra7-dss", }; -struct device_node * __init omapdss_find_dss_of_node(void) +static struct device_node * __init omapdss_find_dss_of_node(void) { struct device_node *node; int i; diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h index 78f253005279..9a39646d4316 100644 --- a/arch/arm/mach-omap2/display.h +++ b/arch/arm/mach-omap2/display.h @@ -31,11 +31,4 @@ int omap_init_vrfb(void); int omap_init_fb(void); int omap_init_vout(void); -struct device_node * __init omapdss_find_dss_of_node(void); - -struct omap_dss_board_info; - -/* Init with the board info */ -int omap_display_init(struct omap_dss_board_info *board_data); - #endif diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c deleted file mode 100644 index 7a577145b68b..000000000000 --- a/arch/arm/mach-omap2/gpio.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * OMAP2+ specific gpio initialization - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * Author: - * Charulatha V <charu@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/gpio.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/of.h> -#include <linux/platform_data/gpio-omap.h> - -#include "soc.h" -#include "omap_hwmod.h" -#include "omap_device.h" -#include "omap-pm.h" - -#include "powerdomain.h" - -static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) -{ - struct platform_device *pdev; - struct omap_gpio_platform_data *pdata; - struct omap_gpio_dev_attr *dev_attr; - char *name = "omap_gpio"; - int id; - struct powerdomain *pwrdm; - - /* - * extract the device id from name field available in the - * hwmod database and use the same for constructing ids for - * gpio devices. - * CAUTION: Make sure the name in the hwmod database does - * not change. If changed, make corresponding change here - * or make use of static variable mechanism to handle this. - */ - sscanf(oh->name, "gpio%d", &id); - - pdata = kzalloc(sizeof(struct omap_gpio_platform_data), GFP_KERNEL); - if (!pdata) { - pr_err("gpio%d: Memory allocation failed\n", id); - return -ENOMEM; - } - - dev_attr = (struct omap_gpio_dev_attr *)oh->dev_attr; - pdata->bank_width = dev_attr->bank_width; - pdata->dbck_flag = dev_attr->dbck_flag; - pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; - pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL); - if (!pdata->regs) { - pr_err("gpio%d: Memory allocation failed\n", id); - kfree(pdata); - return -ENOMEM; - } - - switch (oh->class->rev) { - case 0: - if (id == 1) - /* non-wakeup GPIO pins for OMAP2 Bank1 */ - pdata->non_wakeup_gpios = 0xe203ffc0; - else if (id == 2) - /* non-wakeup GPIO pins for OMAP2 Bank2 */ - pdata->non_wakeup_gpios = 0x08700040; - /* fall through */ - - case 1: - pdata->regs->revision = OMAP24XX_GPIO_REVISION; - pdata->regs->direction = OMAP24XX_GPIO_OE; - pdata->regs->datain = OMAP24XX_GPIO_DATAIN; - pdata->regs->dataout = OMAP24XX_GPIO_DATAOUT; - pdata->regs->set_dataout = OMAP24XX_GPIO_SETDATAOUT; - pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT; - pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1; - pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2; - pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1; - pdata->regs->irqenable2 = OMAP24XX_GPIO_IRQENABLE2; - pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1; - pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1; - pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL; - pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN; - pdata->regs->ctrl = OMAP24XX_GPIO_CTRL; - pdata->regs->wkup_en = OMAP24XX_GPIO_WAKE_EN; - pdata->regs->leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0; - pdata->regs->leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1; - pdata->regs->risingdetect = OMAP24XX_GPIO_RISINGDETECT; - pdata->regs->fallingdetect = OMAP24XX_GPIO_FALLINGDETECT; - break; - case 2: - pdata->regs->revision = OMAP4_GPIO_REVISION; - pdata->regs->direction = OMAP4_GPIO_OE; - pdata->regs->datain = OMAP4_GPIO_DATAIN; - pdata->regs->dataout = OMAP4_GPIO_DATAOUT; - pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT; - pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT; - pdata->regs->irqstatus_raw0 = OMAP4_GPIO_IRQSTATUSRAW0; - pdata->regs->irqstatus_raw1 = OMAP4_GPIO_IRQSTATUSRAW1; - pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0; - pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1; - pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0; - pdata->regs->irqenable2 = OMAP4_GPIO_IRQSTATUSSET1; - pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0; - pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0; - pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME; - pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE; - pdata->regs->ctrl = OMAP4_GPIO_CTRL; - pdata->regs->wkup_en = OMAP4_GPIO_IRQWAKEN0; - pdata->regs->leveldetect0 = OMAP4_GPIO_LEVELDETECT0; - pdata->regs->leveldetect1 = OMAP4_GPIO_LEVELDETECT1; - pdata->regs->risingdetect = OMAP4_GPIO_RISINGDETECT; - pdata->regs->fallingdetect = OMAP4_GPIO_FALLINGDETECT; - break; - default: - WARN(1, "Invalid gpio bank_type\n"); - kfree(pdata->regs); - kfree(pdata); - return -EINVAL; - } - - pwrdm = omap_hwmod_get_pwrdm(oh); - pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm); - - pdev = omap_device_build(name, id - 1, oh, pdata, sizeof(*pdata)); - kfree(pdata); - - if (IS_ERR(pdev)) { - WARN(1, "Can't build omap_device for %s:%s.\n", - name, oh->name); - return PTR_ERR(pdev); - } - - return 0; -} - -/* - * gpio_init needs to be done before - * machine_init functions access gpio APIs. - * Hence gpio_init is a omap_postcore_initcall. - */ -static int __init omap2_gpio_init(void) -{ - /* If dtb is there, the devices will be created dynamically */ - if (of_have_populated_dt()) - return -ENODEV; - - return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, NULL); -} -omap_postcore_initcall(omap2_gpio_init); diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index cc6d9fa60924..e2274a162b74 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -223,7 +223,15 @@ static void __init omap3_cpuinfo(void) * and CPU class bits. */ if (soc_is_omap3630()) { - cpu_name = "OMAP3630"; + if (omap3_has_iva() && omap3_has_sgx()) { + cpu_name = (omap3_has_isp()) ? "OMAP3630/DM3730" : "OMAP3621"; + } else if (omap3_has_iva()) { + cpu_name = "DM3725"; + } else if (omap3_has_sgx()) { + cpu_name = "OMAP3615/AM3715"; + } else { + cpu_name = (omap3_has_isp()) ? "AM3703" : "OMAP3611"; + } } else if (soc_is_am35xx()) { cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505"; } else if (soc_is_ti816x()) { diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 759e1d45ba25..0da4f2ea76c4 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -741,14 +741,14 @@ static int _init_main_clk(struct omap_hwmod *oh) int ret = 0; char name[MOD_CLK_MAX_NAME_LEN]; struct clk *clk; + static const char modck[] = "_mod_ck"; - /* +7 magic comes from '_mod_ck' suffix */ - if (strlen(oh->name) + 7 > MOD_CLK_MAX_NAME_LEN) + if (strlen(oh->name) >= MOD_CLK_MAX_NAME_LEN - strlen(modck)) pr_warn("%s: warning: cropping name for %s\n", __func__, oh->name); - strncpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - 7); - strcat(name, "_mod_ck"); + strlcpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - strlen(modck)); + strlcat(name, modck, MOD_CLK_MAX_NAME_LEN); clk = clk_get(NULL, name); if (!IS_ERR(clk)) { @@ -3249,6 +3249,36 @@ int __init omap_hwmod_setup_one(const char *oh_name) } /** + * omap_hwmod_setup_earlycon_flags - set up flags for early console + * + * Enable DEBUG_OMAPUART_FLAGS for uart hwmod that is being used as + * early concole so that hwmod core doesn't reset and keep it in idle + * that specific uart. + */ +#ifdef CONFIG_SERIAL_EARLYCON +static void __init omap_hwmod_setup_earlycon_flags(void) +{ + struct device_node *np; + struct omap_hwmod *oh; + const char *uart; + + np = of_find_node_by_path("/chosen"); + if (np) { + uart = of_get_property(np, "stdout-path", NULL); + if (uart) { + np = of_find_node_by_path(uart); + if (np) { + uart = of_get_property(np, "ti,hwmods", NULL); + oh = omap_hwmod_lookup(uart); + if (oh) + oh->flags |= DEBUG_OMAPUART_FLAGS; + } + } + } +} +#endif + +/** * omap_hwmod_setup_all - set up all registered IP blocks * * Initialize and set up all IP blocks registered with the hwmod code. @@ -3261,6 +3291,9 @@ static int __init omap_hwmod_setup_all(void) _ensure_mpu_hwmod_is_setup(NULL); omap_hwmod_for_each(_init, NULL); +#ifdef CONFIG_SERIAL_EARLYCON + omap_hwmod_setup_earlycon_flags(); +#endif omap_hwmod_for_each(_setup, NULL); return 0; diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 8cdfd9b7ab4f..a2d763a4cc57 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -1748,6 +1748,7 @@ static struct omap_hwmod omap54xx_uart1_hwmod = { .name = "uart1", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { @@ -1763,6 +1764,7 @@ static struct omap_hwmod omap54xx_uart2_hwmod = { .name = "uart2", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { @@ -1778,7 +1780,7 @@ static struct omap_hwmod omap54xx_uart3_hwmod = { .name = "uart3", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", - .flags = DEBUG_OMAP4UART3_FLAGS, + .flags = DEBUG_OMAP4UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { @@ -1794,7 +1796,7 @@ static struct omap_hwmod omap54xx_uart4_hwmod = { .name = "uart4", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", - .flags = DEBUG_OMAP4UART4_FLAGS, + .flags = DEBUG_OMAP4UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { @@ -1810,6 +1812,7 @@ static struct omap_hwmod omap54xx_uart5_hwmod = { .name = "uart5", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { @@ -1825,6 +1828,7 @@ static struct omap_hwmod omap54xx_uart6_hwmod = { .name = "uart6", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index cdfbb44ceb0c..f22e9cb39f4a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -121,10 +121,6 @@ extern struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[]; extern struct omap_hwmod_irq_info omap2_dispc_irqs[]; extern struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[]; extern struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[]; -extern struct omap_hwmod_irq_info omap2_gpio1_irqs[]; -extern struct omap_hwmod_irq_info omap2_gpio2_irqs[]; -extern struct omap_hwmod_irq_info omap2_gpio3_irqs[]; -extern struct omap_hwmod_irq_info omap2_gpio4_irqs[]; extern struct omap_hwmod_irq_info omap2_dma_system_irqs[]; extern struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[]; extern struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[]; diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 6bf626700557..1346b3ab34a5 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -1,5 +1,5 @@ /** - * OMAP and TWL PMIC specific intializations. + * OMAP and TWL PMIC specific initializations. * * Copyright (C) 2010 Texas Instruments Incorporated. * Thara Gopinath diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 477910a48448..9700a8ef0f16 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -161,7 +161,7 @@ static struct ti_st_plat_data wilink7_pdata = { .nshutdown_gpio = 162, .dev_name = "/dev/ttyO1", .flow_cntrl = 1, - .baud_rate = 300000, + .baud_rate = 3000000, }; static struct platform_device wl128x_device = { @@ -484,15 +484,15 @@ static struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = { }; #endif -static struct lirc_rx51_platform_data __maybe_unused rx51_lirc_data = { +static struct ir_rx51_platform_data __maybe_unused rx51_ir_data = { .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat, }; -static struct platform_device __maybe_unused rx51_lirc_device = { - .name = "lirc_rx51", +static struct platform_device __maybe_unused rx51_ir_device = { + .name = "ir_rx51", .id = -1, .dev = { - .platform_data = &rx51_lirc_data, + .platform_data = &rx51_ir_data, }, }; @@ -533,7 +533,7 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { &omap3_iommu_pdata), OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x4809c000, "4809c000.mmc", &mmc_pdata[0]), OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x480b4000, "480b4000.mmc", &mmc_pdata[1]), - OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_lirc_data), + OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_ir_data), /* Only on am3517 */ OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL), OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0", @@ -599,7 +599,6 @@ static void pdata_quirks_check(struct pdata_init *quirks) if (of_machine_is_compatible(quirks->compatible)) { if (quirks->fn) quirks->fn(); - break; } quirks++; } diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 76b0454ddc49..0598630c1778 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -130,17 +130,16 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, freq = clk_get_rate(clk); clk_put(clk); - rcu_read_lock(); opp = dev_pm_opp_find_freq_ceil(dev, &freq); if (IS_ERR(opp)) { - rcu_read_unlock(); pr_err("%s: unable to find boot up OPP for vdd_%s\n", __func__, vdd_name); goto exit; } bootup_volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); + dev_pm_opp_put(opp); + if (!bootup_volt) { pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n", __func__, vdd_name); diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 5b2f5138d938..2b138b65129a 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -295,10 +295,8 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) GFP_KERNEL); if (!prcm_irq_chips || !prcm_irq_setup->saved_mask || - !prcm_irq_setup->priority_mask) { - pr_err("PRCM: kzalloc failed\n"); + !prcm_irq_setup->priority_mask) goto err; - } memset(mask, 0, sizeof(mask)); diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 56128da23c3a..07dd692c4737 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -510,18 +510,19 @@ void __init omap3_secure_sync32k_timer_init(void) } #endif /* CONFIG_ARCH_OMAP3 */ -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \ + defined(CONFIG_SOC_AM43XX) void __init omap3_gptimer_timer_init(void) { __omap_sync32k_timer_init(2, "timer_sys_ck", NULL, 1, "timer_sys_ck", "ti,timer-alwon", true); - - clocksource_probe(); + if (of_have_populated_dt()) + clocksource_probe(); } #endif #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ - defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX) + defined(CONFIG_SOC_DRA7XX) static void __init omap4_sync32k_timer_init(void) { __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon", diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 04910764c385..83a7ec4c16d0 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -105,7 +105,7 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) /***************************************************************************** * Ethernet switch ****************************************************************************/ -void __init orion5x_eth_switch_init(struct dsa_platform_data *d) +void __init orion5x_eth_switch_init(struct dsa_chip_data *d) { orion_ge00_switch_init(d); } diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 8a4115bd441d..efeffc6b4ebb 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -3,7 +3,7 @@ #include <linux/reboot.h> -struct dsa_platform_data; +struct dsa_chip_data; struct mv643xx_eth_platform_data; struct mv_sata_platform_data; @@ -41,7 +41,7 @@ void orion5x_setup_wins(void); void orion5x_ehci0_init(void); void orion5x_ehci1_init(void); void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data); -void orion5x_eth_switch_init(struct dsa_platform_data *d); +void orion5x_eth_switch_init(struct dsa_chip_data *d); void orion5x_i2c_init(void); void orion5x_sata_init(struct mv_sata_platform_data *sata_data); void orion5x_spi_init(void); diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index dccadf68ea2b..a3c1336d30c9 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -101,11 +101,6 @@ static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = { .port_names[7] = "lan3", }; -static struct dsa_platform_data __initdata rd88f5181l_fxo_switch_plat_data = { - .nr_chips = 1, - .chip = &rd88f5181l_fxo_switch_chip_data, -}; - static void __init rd88f5181l_fxo_init(void) { /* @@ -120,7 +115,7 @@ static void __init rd88f5181l_fxo_init(void) */ orion5x_ehci0_init(); orion5x_eth_init(&rd88f5181l_fxo_eth_data); - orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data); + orion5x_eth_switch_init(&rd88f5181l_fxo_switch_chip_data); orion5x_uart0_init(); mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index affe5ec825de..252efe29bd1a 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -102,11 +102,6 @@ static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = { .port_names[7] = "lan3", }; -static struct dsa_platform_data __initdata rd88f5181l_ge_switch_plat_data = { - .nr_chips = 1, - .chip = &rd88f5181l_ge_switch_chip_data, -}; - static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = { I2C_BOARD_INFO("ds1338", 0x68), }; @@ -125,7 +120,7 @@ static void __init rd88f5181l_ge_init(void) */ orion5x_ehci0_init(); orion5x_eth_init(&rd88f5181l_ge_eth_data); - orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data); + orion5x_eth_switch_init(&rd88f5181l_ge_switch_chip_data); orion5x_i2c_init(); orion5x_uart0_init(); diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c index 67ee8571b03c..f4f1dbe1d91d 100644 --- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c @@ -40,11 +40,6 @@ static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = { .port_names[5] = "cpu", }; -static struct dsa_platform_data __initdata rd88f6183ap_ge_switch_plat_data = { - .nr_chips = 1, - .chip = &rd88f6183ap_ge_switch_chip_data, -}; - static struct mtd_partition rd88f6183ap_ge_partitions[] = { { .name = "kernel", @@ -89,7 +84,7 @@ static void __init rd88f6183ap_ge_init(void) */ orion5x_ehci0_init(); orion5x_eth_init(&rd88f6183ap_ge_eth_data); - orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data); + orion5x_eth_switch_init(&rd88f6183ap_ge_switch_chip_data); spi_register_board_info(rd88f6183ap_ge_spi_slave_info, ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info)); orion5x_spi_init(); diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 8d597267d0c4..7ef80a8304c0 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -16,7 +16,6 @@ #include <linux/platform_device.h> #include <linux/mv643xx_eth.h> #include <linux/ata_platform.h> -#include <linux/platform_data/rtc-m48t86.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/timeriomem-rng.h> @@ -80,79 +79,38 @@ static struct mv_sata_platform_data ts78xx_sata_data = { /***************************************************************************** * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c ****************************************************************************/ -#define TS_RTC_CTRL (TS78XX_FPGA_REGS_VIRT_BASE + 0x808) -#define TS_RTC_DATA (TS78XX_FPGA_REGS_VIRT_BASE + 0x80c) +#define TS_RTC_CTRL (TS78XX_FPGA_REGS_PHYS_BASE + 0x808) +#define TS_RTC_DATA (TS78XX_FPGA_REGS_PHYS_BASE + 0x80c) -static unsigned char ts78xx_ts_rtc_readbyte(unsigned long addr) -{ - writeb(addr, TS_RTC_CTRL); - return readb(TS_RTC_DATA); -} - -static void ts78xx_ts_rtc_writebyte(unsigned char value, unsigned long addr) -{ - writeb(addr, TS_RTC_CTRL); - writeb(value, TS_RTC_DATA); -} - -static struct m48t86_ops ts78xx_ts_rtc_ops = { - .readbyte = ts78xx_ts_rtc_readbyte, - .writebyte = ts78xx_ts_rtc_writebyte, +static struct resource ts78xx_ts_rtc_resources[] = { + DEFINE_RES_MEM(TS_RTC_CTRL, 0x01), + DEFINE_RES_MEM(TS_RTC_DATA, 0x01), }; static struct platform_device ts78xx_ts_rtc_device = { .name = "rtc-m48t86", .id = -1, - .dev = { - .platform_data = &ts78xx_ts_rtc_ops, - }, - .num_resources = 0, + .resource = ts78xx_ts_rtc_resources, + .num_resources = ARRAY_SIZE(ts78xx_ts_rtc_resources), }; -/* - * TS uses some of the user storage space on the RTC chip so see if it is - * present; as it's an optional feature at purchase time and not all boards - * will have it present - * - * I've used the method TS use in their rtc7800.c example for the detection - * - * TODO: track down a guinea pig without an RTC to see if we can work out a - * better RTC detection routine - */ static int ts78xx_ts_rtc_load(void) { int rc; - unsigned char tmp_rtc0, tmp_rtc1; - - tmp_rtc0 = ts78xx_ts_rtc_readbyte(126); - tmp_rtc1 = ts78xx_ts_rtc_readbyte(127); - - ts78xx_ts_rtc_writebyte(0x00, 126); - ts78xx_ts_rtc_writebyte(0x55, 127); - if (ts78xx_ts_rtc_readbyte(127) == 0x55) { - ts78xx_ts_rtc_writebyte(0xaa, 127); - if (ts78xx_ts_rtc_readbyte(127) == 0xaa - && ts78xx_ts_rtc_readbyte(126) == 0x00) { - ts78xx_ts_rtc_writebyte(tmp_rtc0, 126); - ts78xx_ts_rtc_writebyte(tmp_rtc1, 127); - - if (ts78xx_fpga.supports.ts_rtc.init == 0) { - rc = platform_device_register(&ts78xx_ts_rtc_device); - if (!rc) - ts78xx_fpga.supports.ts_rtc.init = 1; - } else - rc = platform_device_add(&ts78xx_ts_rtc_device); - - if (rc) - pr_info("RTC could not be registered: %d\n", - rc); - return rc; - } + + if (ts78xx_fpga.supports.ts_rtc.init == 0) { + rc = platform_device_register(&ts78xx_ts_rtc_device); + if (!rc) + ts78xx_fpga.supports.ts_rtc.init = 1; + } else { + rc = platform_device_add(&ts78xx_ts_rtc_device); } - pr_info("RTC not found\n"); - return -ENODEV; -}; + if (rc) + pr_info("RTC could not be registered: %d\n", rc); + + return rc; +} static void ts78xx_ts_rtc_unload(void) { diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 4dbcdbe1de7c..d162d4c7f85d 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -106,11 +106,6 @@ static struct dsa_chip_data wnr854t_switch_chip_data = { .port_names[7] = "lan2", }; -static struct dsa_platform_data __initdata wnr854t_switch_plat_data = { - .nr_chips = 1, - .chip = &wnr854t_switch_chip_data, -}; - static void __init wnr854t_init(void) { /* @@ -124,7 +119,7 @@ static void __init wnr854t_init(void) * Configure peripherals. */ orion5x_eth_init(&wnr854t_eth_data); - orion5x_eth_switch_init(&wnr854t_switch_plat_data); + orion5x_eth_switch_init(&wnr854t_switch_chip_data); orion5x_uart0_init(); mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index a6a8c4648d74..9250bb2e429c 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -191,11 +191,6 @@ static struct dsa_chip_data wrt350n_v2_switch_chip_data = { .port_names[7] = "lan4", }; -static struct dsa_platform_data __initdata wrt350n_v2_switch_plat_data = { - .nr_chips = 1, - .chip = &wrt350n_v2_switch_chip_data, -}; - static void __init wrt350n_v2_init(void) { /* @@ -210,7 +205,7 @@ static void __init wrt350n_v2_init(void) */ orion5x_ehci0_init(); orion5x_eth_init(&wrt350n_v2_eth_data); - orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data); + orion5x_eth_switch_init(&wrt350n_v2_switch_chip_data); orion5x_uart0_init(); mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 8a3c409294bf..d452a49c0396 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/interrupt.h> +#include <linux/leds.h> #include <linux/sched.h> #include <linux/bitops.h> #include <linux/fb.h> diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index 8cff770e6a00..d7cf47d03618 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -17,6 +17,7 @@ #include <linux/gpio.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/leds.h> #include <linux/ioport.h> #include <linux/kernel.h> #include <linux/platform_device.h> diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 183cd3446f25..7270f0db3432 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -19,6 +19,7 @@ #include <linux/major.h> #include <linux/fs.h> #include <linux/interrupt.h> +#include <linux/leds.h> #include <linux/mmc/host.h> #include <linux/mtd/physmap.h> #include <linux/pm.h> diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 0b8300e6fca3..a057cf9c0e7b 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -696,32 +696,7 @@ static struct pxa27x_keypad_platform_data e2_keypad_platform_data = { }; #endif /* CONFIG_MACH_EZX_E2 */ -#ifdef CONFIG_MACH_EZX_A780 -/* gpio_keys */ -static struct gpio_keys_button a780_buttons[] = { - [0] = { - .code = SW_LID, - .gpio = GPIO12_A780_FLIP_LID, - .active_low = 0, - .desc = "A780 flip lid", - .type = EV_SW, - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data a780_gpio_keys_platform_data = { - .buttons = a780_buttons, - .nbuttons = ARRAY_SIZE(a780_buttons), -}; - -static struct platform_device a780_gpio_keys = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &a780_gpio_keys_platform_data, - }, -}; - +#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_A910) /* camera */ static struct regulator_consumer_supply camera_dummy_supplies[] = { REGULATOR_SUPPLY("vdd", "0-005d"), @@ -750,6 +725,35 @@ static struct platform_device camera_supply_dummy_device = { .platform_data = &camera_dummy_config, }, }; +#endif + +#ifdef CONFIG_MACH_EZX_A780 +/* gpio_keys */ +static struct gpio_keys_button a780_buttons[] = { + [0] = { + .code = SW_LID, + .gpio = GPIO12_A780_FLIP_LID, + .active_low = 0, + .desc = "A780 flip lid", + .type = EV_SW, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data a780_gpio_keys_platform_data = { + .buttons = a780_buttons, + .nbuttons = ARRAY_SIZE(a780_buttons), +}; + +static struct platform_device a780_gpio_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &a780_gpio_keys_platform_data, + }, +}; + +/* camera */ static int a780_camera_reset(struct device *dev) { gpio_set_value(GPIO19_GEN1_CAM_RST, 0); diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index d1db32b1a2c6..88e0068f92a8 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/leds.h> #include <linux/platform_device.h> #include <linux/fb.h> diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index ea78bc5c4198..3dd13b44c311 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -16,6 +16,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/interrupt.h> +#include <linux/leds.h> #include <linux/export.h> #include <linux/sched.h> #include <linux/bitops.h> diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index c006ee902a8f..70ab3ad28237 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -15,6 +15,7 @@ #include <linux/irq.h> #include <linux/gpio_keys.h> #include <linux/input.h> +#include <linux/leds.h> #include <linux/gpio.h> #include <linux/usb/gpio_vbus.h> #include <linux/mtd/mtd.h> diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 3b94ecfb9426..ecbcaee5a2d5 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -13,6 +13,7 @@ #include <linux/cpufreq.h> #include <linux/interrupt.h> +#include <linux/leds.h> #include <linux/irq.h> #include <linux/pm.h> #include <linux/gpio.h> diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 3642389b301a..4268552d600d 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/interrupt.h> +#include <linux/leds.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/gpio.h> diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index a7ab9ec141f8..ef0500a4c8ad 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -29,13 +29,11 @@ #include "core.h" #include "pm.h" -#define RK3288_GRF_SOC_CON0 0x244 #define RK3288_TIMER6_7_PHYS 0xff810000 static void __init rockchip_timer_init(void) { if (of_machine_is_compatible("rockchip,rk3288")) { - struct regmap *grf; void __iomem *reg_base; /* @@ -54,16 +52,6 @@ static void __init rockchip_timer_init(void) } else { pr_err("rockchip: could not map timer7 registers\n"); } - - /* - * Disable auto jtag/sdmmc switching that causes issues - * with the mmc controllers making them unreliable - */ - grf = syscon_regmap_lookup_by_compatible("rockchip,rk3288-grf"); - if (!IS_ERR(grf)) - regmap_write(grf, RK3288_GRF_SOC_CON0, 0x10000000); - else - pr_err("rockchip: could not get grf syscon\n"); } of_clk_init(NULL); diff --git a/arch/arm/mach-s3c24xx/bast-irq.c b/arch/arm/mach-s3c24xx/bast-irq.c index 2bb08961e934..ad8f4cd7c327 100644 --- a/arch/arm/mach-s3c24xx/bast-irq.c +++ b/arch/arm/mach-s3c24xx/bast-irq.c @@ -44,7 +44,7 @@ /* table of ISA irq nos to the relevant mask... zero means * the irq is not implemented */ -static unsigned char bast_pc104_irqmasks[] = { +static const unsigned char bast_pc104_irqmasks[] = { 0, /* 0 */ 0, /* 1 */ 0, /* 2 */ @@ -63,7 +63,7 @@ static unsigned char bast_pc104_irqmasks[] = { 0, /* 15 */ }; -static unsigned char bast_pc104_irqs[] = { 3, 5, 7, 10 }; +static const unsigned char bast_pc104_irqs[] = { 3, 5, 7, 10 }; static void bast_pc104_mask(struct irq_data *data) diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index f6c3f151d0d4..b59f4f4f256f 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -345,10 +345,40 @@ static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = { [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), }, }; +static const struct dma_slave_map s3c2410_dma_slave_map[] = { + { "s3c2410-sdi", "rx-tx", (void *)DMACH_SDI }, + { "s3c2410-spi.0", "rx", (void *)DMACH_SPI0_RX }, + { "s3c2410-spi.0", "tx", (void *)DMACH_SPI0_TX }, + { "s3c2410-spi.1", "rx", (void *)DMACH_SPI1_RX }, + { "s3c2410-spi.1", "tx", (void *)DMACH_SPI1_TX }, + /* + * The DMA request source[1] (DMACH_UARTx_SRC2) are + * not used in the UART driver. + */ + { "s3c2410-uart.0", "rx", (void *)DMACH_UART0 }, + { "s3c2410-uart.0", "tx", (void *)DMACH_UART0 }, + { "s3c2410-uart.1", "rx", (void *)DMACH_UART1 }, + { "s3c2410-uart.1", "tx", (void *)DMACH_UART1 }, + { "s3c2410-uart.2", "rx", (void *)DMACH_UART2 }, + { "s3c2410-uart.2", "tx", (void *)DMACH_UART2 }, + { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN }, + { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT }, + { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 }, + { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 }, + { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 }, + { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 }, + { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 }, + { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 }, + { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 }, + { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 } +}; + static struct s3c24xx_dma_platdata s3c2410_dma_platdata = { .num_phy_channels = 4, .channels = s3c2410_dma_channels, .num_channels = DMACH_MAX, + .slave_map = s3c2410_dma_slave_map, + .slavecnt = ARRAY_SIZE(s3c2410_dma_slave_map), }; struct platform_device s3c2410_device_dma = { @@ -388,10 +418,36 @@ static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = { [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 }, }; +static const struct dma_slave_map s3c2412_dma_slave_map[] = { + { "s3c2412-sdi", "rx-tx", (void *)DMACH_SDI }, + { "s3c2412-spi.0", "rx", (void *)DMACH_SPI0_RX }, + { "s3c2412-spi.0", "tx", (void *)DMACH_SPI0_TX }, + { "s3c2412-spi.1", "rx", (void *)DMACH_SPI1_RX }, + { "s3c2412-spi.1", "tx", (void *)DMACH_SPI1_TX }, + { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 }, + { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 }, + { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 }, + { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 }, + { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 }, + { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 }, + { "s3c2412-iis", "rx", (void *)DMACH_I2S_IN }, + { "s3c2412-iis", "tx", (void *)DMACH_I2S_OUT }, + { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 }, + { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 }, + { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 }, + { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 }, + { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 }, + { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 }, + { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 }, + { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 } +}; + static struct s3c24xx_dma_platdata s3c2412_dma_platdata = { .num_phy_channels = 4, .channels = s3c2412_dma_channels, .num_channels = DMACH_MAX, + .slave_map = s3c2412_dma_slave_map, + .slavecnt = ARRAY_SIZE(s3c2412_dma_slave_map), }; struct platform_device s3c2412_device_dma = { @@ -534,10 +590,30 @@ static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = { [DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 }, }; +static const struct dma_slave_map s3c2443_dma_slave_map[] = { + { "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI }, + { "s3c2443-spi.0", "rx", (void *)DMACH_SPI0_RX }, + { "s3c2443-spi.0", "tx", (void *)DMACH_SPI0_TX }, + { "s3c2443-spi.1", "rx", (void *)DMACH_SPI1_RX }, + { "s3c2443-spi.1", "tx", (void *)DMACH_SPI1_TX }, + { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 }, + { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 }, + { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 }, + { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 }, + { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 }, + { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 }, + { "s3c2440-uart.3", "rx", (void *)DMACH_UART3 }, + { "s3c2440-uart.3", "tx", (void *)DMACH_UART3 }, + { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN }, + { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT }, +}; + static struct s3c24xx_dma_platdata s3c2443_dma_platdata = { .num_phy_channels = 6, .channels = s3c2443_dma_channels, .num_channels = DMACH_MAX, + .slave_map = s3c2443_dma_slave_map, + .slavecnt = ARRAY_SIZE(s3c2443_dma_slave_map), }; struct platform_device s3c2443_device_dma = { diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c index 65e5f9cb650f..b7970f1fa3d5 100644 --- a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c +++ b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c @@ -249,7 +249,7 @@ static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg, return 0; } -static unsigned int tacc_tab[] = { +static const unsigned int tacc_tab[] = { [0] = 1, [1] = 2, [2] = 3, diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c index d75f95e487ee..0ae4d47a4663 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2412.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c @@ -53,7 +53,7 @@ static int s3c2412_cpu_suspend(unsigned long arg) } /* mapping of interrupts to parts of the wakeup mask */ -static struct samsung_wakeup_mask wake_irqs[] = { +static const struct samsung_wakeup_mask wake_irqs[] = { { .irq = IRQ_RTC, .bit = S3C2412_PWRCFG_RTC_MASKIRQ, }, }; diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 7c66ce1a6bb6..9843eb4dd04e 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -56,7 +56,8 @@ #include "watchdog-reset.h" /* External clock frequency */ -static unsigned long xtal_f = 12000000, xusbxti_f = 48000000; +static unsigned long xtal_f __ro_after_init = 12000000; +static unsigned long xusbxti_f __ro_after_init = 48000000; void __init s3c64xx_set_xtal_freq(unsigned long freq) { diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c index b57783371d52..cb953e238b2a 100644 --- a/arch/arm/mach-s3c64xx/dev-audio.c +++ b/arch/arm/mach-s3c64xx/dev-audio.c @@ -58,9 +58,6 @@ static struct resource s3c64xx_iis0_resource[] = { static struct s3c_audio_pdata i2s0_pdata = { .cfg_gpio = s3c64xx_i2s_cfg_gpio, - .dma_filter = pl08x_filter_id, - .dma_playback = DMACH_I2S0_OUT, - .dma_capture = DMACH_I2S0_IN, }; struct platform_device s3c64xx_device_iis0 = { @@ -80,9 +77,6 @@ static struct resource s3c64xx_iis1_resource[] = { static struct s3c_audio_pdata i2s1_pdata = { .cfg_gpio = s3c64xx_i2s_cfg_gpio, - .dma_filter = pl08x_filter_id, - .dma_playback = DMACH_I2S1_OUT, - .dma_capture = DMACH_I2S1_IN, }; struct platform_device s3c64xx_device_iis1 = { @@ -102,13 +96,8 @@ static struct resource s3c64xx_iisv4_resource[] = { static struct s3c_audio_pdata i2sv4_pdata = { .cfg_gpio = s3c64xx_i2s_cfg_gpio, - .dma_filter = pl08x_filter_id, - .dma_playback = DMACH_HSI_I2SV40_TX, - .dma_capture = DMACH_HSI_I2SV40_RX, .type = { - .i2s = { - .quirks = QUIRK_PRI_6CHAN, - }, + .quirks = QUIRK_PRI_6CHAN, }, }; @@ -153,9 +142,6 @@ static struct resource s3c64xx_pcm0_resource[] = { static struct s3c_audio_pdata s3c_pcm0_pdata = { .cfg_gpio = s3c64xx_pcm_cfg_gpio, - .dma_filter = pl08x_filter_id, - .dma_capture = DMACH_PCM0_RX, - .dma_playback = DMACH_PCM0_TX, }; struct platform_device s3c64xx_device_pcm0 = { @@ -175,9 +161,6 @@ static struct resource s3c64xx_pcm1_resource[] = { static struct s3c_audio_pdata s3c_pcm1_pdata = { .cfg_gpio = s3c64xx_pcm_cfg_gpio, - .dma_filter = pl08x_filter_id, - .dma_playback = DMACH_PCM1_TX, - .dma_capture = DMACH_PCM1_RX, }; struct platform_device s3c64xx_device_pcm1 = { @@ -209,10 +192,6 @@ static struct resource s3c64xx_ac97_resource[] = { }; static struct s3c_audio_pdata s3c_ac97_pdata = { - .dma_playback = DMACH_AC97_PCMOUT, - .dma_filter = pl08x_filter_id, - .dma_capture = DMACH_AC97_PCMIN, - .dma_capture_mic = DMACH_AC97_MICIN, }; static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 945a9d1e1a71..2f579be8fe67 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -285,7 +285,7 @@ static int s3c64xx_cpu_suspend(unsigned long arg) } /* mapping of interrupts to parts of the wakeup mask */ -static struct samsung_wakeup_mask wake_irqs[] = { +static const struct samsung_wakeup_mask wake_irqs[] = { { .irq = IRQ_RTC_ALARM, .bit = S3C64XX_PWRCFG_RTC_ALARM_DISABLE, }, { .irq = IRQ_RTC_TIC, .bit = S3C64XX_PWRCFG_RTC_TICK_DISABLE, }, { .irq = IRQ_PENDN, .bit = S3C64XX_PWRCFG_TS_DISABLE, }, diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 2d5f08015e34..07cee14a363b 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -155,13 +155,6 @@ static const struct platform_suspend_ops s5pv210_suspend_ops = { */ static void s5pv210_pm_resume(void) { - u32 tmp; - - tmp = __raw_readl(S5P_OTHERS); - tmp |= (S5P_OTHERS_RET_IO | S5P_OTHERS_RET_CF |\ - S5P_OTHERS_RET_MMC | S5P_OTHERS_RET_UART); - __raw_writel(tmp , S5P_OTHERS); - s3c_pm_do_restore_core(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); } diff --git a/arch/arm/mach-s5pv210/regs-clock.h b/arch/arm/mach-s5pv210/regs-clock.h index 4640f0f03c12..fb3eb77412db 100644 --- a/arch/arm/mach-s5pv210/regs-clock.h +++ b/arch/arm/mach-s5pv210/regs-clock.h @@ -188,10 +188,6 @@ #define S5P_SLEEP_CFG_USBOSC_EN (1 << 1) /* OTHERS Resgister */ -#define S5P_OTHERS_RET_IO (1 << 31) -#define S5P_OTHERS_RET_CF (1 << 30) -#define S5P_OTHERS_RET_MMC (1 << 29) -#define S5P_OTHERS_RET_UART (1 << 28) #define S5P_OTHERS_USB_SIG_MASK (1 << 16) /* S5P_DAC_CONTROL */ diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 2bb4b09f079e..ad7d604ff001 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -57,6 +57,7 @@ config ARCH_R7S72100 select PM select PM_GENERIC_DOMAINS select SYS_SUPPORTS_SH_MTU2 + select RENESAS_OSTM config ARCH_R8A73A4 bool "R-Mobile APE6 (R8A73A40)" diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c index 71729b8d1900..3ca2c13346f0 100644 --- a/arch/arm/mach-shmobile/platsmp-apmu.c +++ b/arch/arm/mach-shmobile/platsmp-apmu.c @@ -31,9 +31,21 @@ static struct { int bit; } apmu_cpus[NR_CPUS]; -#define WUPCR_OFFS 0x10 -#define PSTR_OFFS 0x40 -#define CPUNCR_OFFS(n) (0x100 + (0x10 * (n))) +#define WUPCR_OFFS 0x10 /* Wake Up Control Register */ +#define PSTR_OFFS 0x40 /* Power Status Register */ +#define CPUNCR_OFFS(n) (0x100 + (0x10 * (n))) + /* CPUn Power Status Control Register */ +#define DBGRCR_OFFS 0x180 /* Debug Resource Reset Control Reg. */ + +/* Power Status Register */ +#define CPUNST(r, n) (((r) >> (n * 4)) & 3) /* CPUn Status Bit */ +#define CPUST_RUN 0 /* Run Mode */ +#define CPUST_STANDBY 3 /* CoreStandby Mode */ + +/* Debug Resource Reset Control Register */ +#define DBGCPUREN BIT(24) /* CPU Other Reset Request Enable */ +#define DBGCPUNREN(n) BIT((n) + 20) /* CPUn Reset Request Enable */ +#define DBGCPUPREN BIT(19) /* CPU Peripheral Reset Req. Enable */ static int __maybe_unused apmu_power_on(void __iomem *p, int bit) { @@ -59,7 +71,7 @@ static int __maybe_unused apmu_power_off_poll(void __iomem *p, int bit) int k; for (k = 0; k < 1000; k++) { - if (((readl_relaxed(p + PSTR_OFFS) >> (bit * 4)) & 0x03) == 3) + if (CPUNST(readl_relaxed(p + PSTR_OFFS), bit) == CPUST_STANDBY) return 1; mdelay(1); @@ -78,6 +90,8 @@ static int __maybe_unused apmu_wrap(int cpu, int (*fn)(void __iomem *p, int cpu) #ifdef CONFIG_SMP static void apmu_init_cpu(struct resource *res, int cpu, int bit) { + u32 x; + if ((cpu >= ARRAY_SIZE(apmu_cpus)) || apmu_cpus[cpu].iomem) return; @@ -85,6 +99,11 @@ static void apmu_init_cpu(struct resource *res, int cpu, int bit) apmu_cpus[cpu].bit = bit; pr_debug("apmu ioremap %d %d %pr\n", cpu, bit, res); + + /* Setup for debug mode */ + x = readl(apmu_cpus[cpu].iomem + DBGRCR_OFFS); + x |= DBGCPUREN | DBGCPUNREN(bit) | DBGCPUPREN; + writel(x, apmu_cpus[cpu].iomem + DBGRCR_OFFS); } static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit), @@ -197,21 +216,9 @@ static void __init shmobile_smp_apmu_prepare_cpus_dt(unsigned int max_cpus) rcar_gen2_pm_init(); } -static int shmobile_smp_apmu_boot_secondary_md21(unsigned int cpu, - struct task_struct *idle) -{ - /* Error out when hardware debug mode is enabled */ - if (rcar_gen2_read_mode_pins() & BIT(21)) { - pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu); - return -ENOTSUPP; - } - - return shmobile_smp_apmu_boot_secondary(cpu, idle); -} - static struct smp_operations apmu_smp_ops __initdata = { .smp_prepare_cpus = shmobile_smp_apmu_prepare_cpus_dt, - .smp_boot_secondary = shmobile_smp_apmu_boot_secondary_md21, + .smp_boot_secondary = shmobile_smp_apmu_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_can_disable = shmobile_smp_cpu_can_disable, .cpu_die = shmobile_smp_apmu_cpu_die, diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c index dd9ac366868f..0178da7ace82 100644 --- a/arch/arm/mach-shmobile/pm-rcar-gen2.c +++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c @@ -20,14 +20,30 @@ /* RST */ #define RST 0xe6160000 -#define CA15BAR 0x0020 -#define CA7BAR 0x0030 -#define CA15RESCNT 0x0040 -#define CA7RESCNT 0x0044 + +#define CA15BAR 0x0020 /* CA15 Boot Address Register */ +#define CA7BAR 0x0030 /* CA7 Boot Address Register */ +#define CA15RESCNT 0x0040 /* CA15 Reset Control Register */ +#define CA7RESCNT 0x0044 /* CA7 Reset Control Register */ + +/* SYS Boot Address Register */ +#define SBAR_BAREN BIT(4) /* SBAR is valid */ + +/* Reset Control Registers */ +#define CA15RESCNT_CODE 0xa5a50000 +#define CA15RESCNT_CPUS 0xf /* CPU0-3 */ +#define CA7RESCNT_CODE 0x5a5a0000 +#define CA7RESCNT_CPUS 0xf /* CPU0-3 */ + /* On-chip RAM */ #define ICRAM1 0xe63c0000 /* Inter Connect RAM1 (4 KiB) */ +static inline u32 phys_to_sbar(phys_addr_t addr) +{ + return (addr >> 8) & 0xfffffc00; +} + /* SYSC */ #define SYSCIER 0x0c #define SYSCIMR 0x10 @@ -82,22 +98,24 @@ void __init rcar_gen2_pm_init(void) /* setup reset vectors */ p = ioremap_nocache(RST, 0x63); - bar = (boot_vector_addr >> 8) & 0xfffffc00; + bar = phys_to_sbar(boot_vector_addr); if (has_a15) { writel_relaxed(bar, p + CA15BAR); - writel_relaxed(bar | 0x10, p + CA15BAR); + writel_relaxed(bar | SBAR_BAREN, p + CA15BAR); /* de-assert reset for CA15 CPUs */ - writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | - 0xa5a50000, p + CA15RESCNT); + writel_relaxed((readl_relaxed(p + CA15RESCNT) & + ~CA15RESCNT_CPUS) | CA15RESCNT_CODE, + p + CA15RESCNT); } if (has_a7) { writel_relaxed(bar, p + CA7BAR); - writel_relaxed(bar | 0x10, p + CA7BAR); + writel_relaxed(bar | SBAR_BAREN, p + CA7BAR); /* de-assert reset for CA7 CPUs */ - writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | - 0x5a5a0000, p + CA7RESCNT); + writel_relaxed((readl_relaxed(p + CA7RESCNT) & + ~CA7RESCNT_CPUS) | CA7RESCNT_CODE, + p + CA7RESCNT); } iounmap(p); diff --git a/arch/arm/mach-shmobile/rcar-gen2.h b/arch/arm/mach-shmobile/rcar-gen2.h index 8a66b4aae035..6792e249cf56 100644 --- a/arch/arm/mach-shmobile/rcar-gen2.h +++ b/arch/arm/mach-shmobile/rcar-gen2.h @@ -2,8 +2,6 @@ #define __ASM_RCAR_GEN2_H__ void rcar_gen2_timer_init(void); -#define MD(nr) BIT(nr) -u32 rcar_gen2_read_mode_pins(void); void rcar_gen2_reserve(void); void rcar_gen2_pm_init(void); diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index ac63fa407b64..52d466b75973 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -29,24 +29,6 @@ #include "common.h" #include "rcar-gen2.h" -#define MODEMR 0xe6160060 - -u32 rcar_gen2_read_mode_pins(void) -{ - static u32 mode; - static bool mode_valid; - - if (!mode_valid) { - void __iomem *modemr = ioremap_nocache(MODEMR, 4); - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); - mode_valid = true; - } - - return mode; -} - static unsigned int __init get_extal_freq(void) { struct device_node *cpg, *extal; diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c index 2d6417af73b5..2948c22cfc53 100644 --- a/arch/arm/mach-shmobile/smp-r8a7791.c +++ b/arch/arm/mach-shmobile/smp-r8a7791.c @@ -42,21 +42,9 @@ static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus) rcar_gen2_pm_init(); } -static int r8a7791_smp_boot_secondary(unsigned int cpu, - struct task_struct *idle) -{ - /* Error out when hardware debug mode is enabled */ - if (rcar_gen2_read_mode_pins() & BIT(21)) { - pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu); - return -ENOTSUPP; - } - - return shmobile_smp_apmu_boot_secondary(cpu, idle); -} - const struct smp_operations r8a7791_smp_ops __initconst = { .smp_prepare_cpus = r8a7791_smp_prepare_cpus, - .smp_boot_secondary = r8a7791_smp_boot_secondary, + .smp_boot_secondary = shmobile_smp_apmu_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_can_disable = shmobile_smp_cpu_can_disable, .cpu_die = shmobile_smp_apmu_cpu_die, diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 2e2bde271205..f44e3acb5c90 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -63,7 +63,9 @@ static const char * const sun8i_board_dt_compat[] = { "allwinner,sun8i-a23", "allwinner,sun8i-a33", "allwinner,sun8i-a83t", + "allwinner,sun8i-h2-plus", "allwinner,sun8i-h3", + "allwinner,sun8i-v3s", NULL, }; diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index 7478f6fb3664..ea6bff404161 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -23,7 +23,7 @@ #include "board.h" -static struct property_entry __initdata wifi_rfkill_prop[] = { +static struct property_entry wifi_rfkill_prop[] __initdata = { PROPERTY_ENTRY_STRING("name", "wifi_rfkill"), PROPERTY_ENTRY_STRING("type", "wlan"), { }, diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 56d0eb6e254e..c2499bff4986 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -4,7 +4,6 @@ obj-y := pm.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o -obj-$(CONFIG_MACH_MOP500) += board-mop500-audio.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c deleted file mode 100644 index b2a0899e7453..000000000000 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL), version 2 - */ - -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/platform_data/dma-ste-dma40.h> - -#include <linux/platform_data/asoc-ux500-msp.h> - -#include "ste-dma40-db8500.h" -#include "board-mop500.h" - -static struct stedma40_chan_cfg msp0_dma_rx = { - .high_priority = true, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0, -}; - -static struct stedma40_chan_cfg msp0_dma_tx = { - .high_priority = true, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0, -}; - -struct msp_i2s_platform_data msp0_platform_data = { - .id = 0, - .msp_i2s_dma_rx = &msp0_dma_rx, - .msp_i2s_dma_tx = &msp0_dma_tx, -}; - -static struct stedma40_chan_cfg msp1_dma_rx = { - .high_priority = true, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV30_MSP3, -}; - -static struct stedma40_chan_cfg msp1_dma_tx = { - .high_priority = true, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV30_MSP1, -}; - -struct msp_i2s_platform_data msp1_platform_data = { - .id = 1, - .msp_i2s_dma_rx = NULL, - .msp_i2s_dma_tx = &msp1_dma_tx, -}; - -static struct stedma40_chan_cfg msp2_dma_rx = { - .high_priority = true, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV14_MSP2, -}; - -static struct stedma40_chan_cfg msp2_dma_tx = { - .high_priority = true, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV14_MSP2, - .use_fixed_channel = true, - .phy_channel = 1, -}; - -struct msp_i2s_platform_data msp2_platform_data = { - .id = 2, - .msp_i2s_dma_rx = &msp2_dma_rx, - .msp_i2s_dma_tx = &msp2_dma_tx, -}; - -struct msp_i2s_platform_data msp3_platform_data = { - .id = 3, - .msp_i2s_dma_rx = &msp1_dma_rx, - .msp_i2s_dma_tx = NULL, -}; diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h deleted file mode 100644 index 7c7b0adca582..000000000000 --- a/arch/arm/mach-ux500/board-mop500.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __BOARD_MOP500_H -#define __BOARD_MOP500_H - -#include <linux/platform_data/asoc-ux500-msp.h> - -extern struct msp_i2s_platform_data msp0_platform_data; -extern struct msp_i2s_platform_data msp1_platform_data; -extern struct msp_i2s_platform_data msp2_platform_data; -extern struct msp_i2s_platform_data msp3_platform_data; - -#endif diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 46b1da1bf5d2..24529cf58df6 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/amba/bus.h> -#include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/irqchip.h> @@ -34,7 +33,6 @@ #include "setup.h" -#include "board-mop500.h" #include "db8500-regs.h" static int __init ux500_l2x0_unlock(void) @@ -142,21 +140,6 @@ static struct arm_pmu_platdata db8500_pmu_platdata = { static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), - /* Requires DMA bindings. */ - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, - "ux500-msp-i2s.0", &msp0_platform_data), - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, - "ux500-msp-i2s.1", &msp1_platform_data), - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000, - "ux500-msp-i2s.2", &msp2_platform_data), - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, - "ux500-msp-i2s.3", &msp3_platform_data), - /* Requires non-DT:able platform data. */ - OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL), - OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL), - OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL), - OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0", - NULL), {}, }; diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 8c8f26389067..9b124c22035f 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -31,10 +31,14 @@ #define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4 #define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0 -static void wakeup_secondary(void) +static void __iomem *backupram; + +static void __init ux500_smp_prepare_cpus(unsigned int max_cpus) { struct device_node *np; - static void __iomem *backupram; + static void __iomem *scu_base; + unsigned int ncores; + int i; np = of_find_compatible_node(NULL, NULL, "ste,dbx500-backupram"); if (!np) { @@ -48,29 +52,6 @@ static void wakeup_secondary(void) return; } - /* - * write the address of secondary startup into the backup ram register - * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the - * backup ram register at offset 0x1FF0, which is what boot rom code - * is waiting for. This will wake up the secondary core from WFE. - */ - writel(__pa_symbol(secondary_startup), - backupram + UX500_CPU1_JUMPADDR_OFFSET); - writel(0xA1FEED01, - backupram + UX500_CPU1_WAKEMAGIC_OFFSET); - - /* make sure write buffer is drained */ - mb(); - iounmap(backupram); -} - -static void __init ux500_smp_prepare_cpus(unsigned int max_cpus) -{ - struct device_node *np; - static void __iomem *scu_base; - unsigned int ncores; - int i; - np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); if (!np) { pr_err("No SCU base address\n"); @@ -92,7 +73,19 @@ static void __init ux500_smp_prepare_cpus(unsigned int max_cpus) static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle) { - wakeup_secondary(); + /* + * write the address of secondary startup into the backup ram register + * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the + * backup ram register at offset 0x1FF0, which is what boot rom code + * is waiting for. This will wake up the secondary core from WFE. + */ + writel(__pa_symbol(secondary_startup), + backupram + UX500_CPU1_JUMPADDR_OFFSET); + writel(0xA1FEED01, + backupram + UX500_CPU1_WAKEMAGIC_OFFSET); + + /* make sure write buffer is drained */ + mb(); arch_send_wakeup_ipi_mask(cpumask_of(cpu)); return 0; } diff --git a/arch/arm/mach-ux500/pm.c b/arch/arm/mach-ux500/pm.c index 8538910db202..a970e7fcba9e 100644 --- a/arch/arm/mach-ux500/pm.c +++ b/arch/arm/mach-ux500/pm.c @@ -134,8 +134,8 @@ bool prcmu_pending_irq(void) */ bool prcmu_is_cpu_in_wfi(int cpu) { - return readl(PRCM_ARM_WFI_STANDBY) & cpu ? PRCM_ARM_WFI_STANDBY_WFI1 : - PRCM_ARM_WFI_STANDBY_WFI0; + return readl(PRCM_ARM_WFI_STANDBY) & + (cpu ? PRCM_ARM_WFI_STANDBY_WFI1 : PRCM_ARM_WFI_STANDBY_WFI0); } /* diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h deleted file mode 100644 index 0296ae5b0fd9..000000000000 --- a/arch/arm/mach-ux500/ste-dma40-db8500.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * arch/arm/mach-ux500/ste_dma40_db8500.h - * DB8500-SoC-specific configuration for DMA40 - * - * Copyright (C) ST-Ericsson 2007-2010 - * License terms: GNU General Public License (GPL) version 2 - * Author: Per Friden <per.friden@stericsson.com> - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> - */ -#ifndef STE_DMA40_DB8500_H -#define STE_DMA40_DB8500_H - -#define DB8500_DMA_NR_DEV 64 - -/* - * Unless otherwise specified, all channels numbers are used for - * TX & RX, and can be used for either source or destination - * channels. - */ -enum dma_dev_type { - DB8500_DMA_DEV0_SPI0 = 0, - DB8500_DMA_DEV1_SD_MMC0 = 1, - DB8500_DMA_DEV2_SD_MMC1 = 2, - DB8500_DMA_DEV3_SD_MMC2 = 3, - DB8500_DMA_DEV4_I2C1 = 4, - DB8500_DMA_DEV5_I2C3 = 5, - DB8500_DMA_DEV6_I2C2 = 6, - DB8500_DMA_DEV7_I2C4 = 7, /* Only on V1 and later */ - DB8500_DMA_DEV8_SSP0 = 8, - DB8500_DMA_DEV9_SSP1 = 9, - DB8500_DMA_DEV10_MCDE_RX = 10, /* RX only */ - DB8500_DMA_DEV11_UART2 = 11, - DB8500_DMA_DEV12_UART1 = 12, - DB8500_DMA_DEV13_UART0 = 13, - DB8500_DMA_DEV14_MSP2 = 14, - DB8500_DMA_DEV15_I2C0 = 15, - DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15 = 16, - DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14 = 17, - DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13 = 18, - DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12 = 19, - DB8500_DMA_DEV20_SLIM0_CH0_HSI_CH0 = 20, - DB8500_DMA_DEV21_SLIM0_CH1_HSI_CH1 = 21, - DB8500_DMA_DEV22_SLIM0_CH2_HSI_CH2 = 22, - DB8500_DMA_DEV23_SLIM0_CH3_HSI_CH3 = 23, - DB8500_DMA_DEV24_SXA0 = 24, - DB8500_DMA_DEV25_SXA1 = 25, - DB8500_DMA_DEV26_SXA2 = 26, - DB8500_DMA_DEV27_SXA3 = 27, - DB8500_DMA_DEV28_SD_MM2 = 28, - DB8500_DMA_DEV29_SD_MM0 = 29, - DB8500_DMA_DEV30_MSP1 = 30, - /* On DB8500v2, MSP3 RX replaces MSP1 RX */ - DB8500_DMA_DEV30_MSP3 = 30, - DB8500_DMA_DEV31_MSP0_SLIM0_CH0 = 31, - DB8500_DMA_DEV32_SD_MM1 = 32, - DB8500_DMA_DEV33_SPI2 = 33, - DB8500_DMA_DEV34_I2C3_RX2_TX2 = 34, - DB8500_DMA_DEV35_SPI1 = 35, - DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11 = 36, - DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10 = 37, - DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9 = 38, - DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8 = 39, - DB8500_DMA_DEV40_SPI3 = 40, - DB8500_DMA_DEV41_SD_MM3 = 41, - DB8500_DMA_DEV42_SD_MM4 = 42, - DB8500_DMA_DEV43_SD_MM5 = 43, - DB8500_DMA_DEV44_SXA4 = 44, - DB8500_DMA_DEV45_SXA5 = 45, - DB8500_DMA_DEV46_SLIM0_CH8_SRC_SXA6 = 46, - DB8500_DMA_DEV47_SLIM0_CH9_SRC_SXA7 = 47, - DB8500_DMA_DEV48_CAC1 = 48, - DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49, /* TX only */ - DB8500_DMA_DEV50_HAC1_TX = 50, /* TX only */ - DB8500_DMA_MEMCPY_TX_0 = 51, /* TX only */ - DB8500_DMA_DEV52_SLIM0_CH4_HSI_CH4 = 52, - DB8500_DMA_DEV53_SLIM0_CH5_HSI_CH5 = 53, - DB8500_DMA_DEV54_SLIM0_CH6_HSI_CH6 = 54, - DB8500_DMA_DEV55_SLIM0_CH7_HSI_CH7 = 55, - /* 56 -> 60 are channels reserved for memcpy only */ - DB8500_DMA_DEV61_CAC0 = 61, - DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62, /* TX only */ - DB8500_DMA_DEV63_HAC0_TX = 63, /* TX only */ -}; - -#endif diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index ac395eca7dee..c6c4c9c8824b 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -1072,21 +1072,9 @@ config ARCH_SUPPORTS_BIG_ENDIAN This option specifies the architecture can support big endian operation. -config DEBUG_RODATA - bool "Make kernel text and rodata read-only" - depends on MMU && !XIP_KERNEL - default y if CPU_V7 - help - If this is set, kernel text and rodata memory will be made - read-only, and non-text kernel memory will be made non-executable. - The tradeoff is that each region is padded to section-size (1MiB) - boundaries (because their permissions are different and splitting - the 1M pages into 4K ones causes TLB performance problems), which - can waste memory. - config DEBUG_ALIGN_RODATA bool "Make rodata strictly non-executable" - depends on DEBUG_RODATA + depends on STRICT_KERNEL_RWX default y help If this is set, rodata will be made explicitly non-executable. This diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index a134d8a13d00..de78109d002d 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -164,7 +164,7 @@ skip: cmp r3, r10 bgt flush_levels finished: - mov r10, #0 @ swith back to cache level 0 + mov r10, #0 @ switch back to cache level 0 mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr dsb st isb diff --git a/arch/arm/mm/cache-v7m.S b/arch/arm/mm/cache-v7m.S index 816a7e44e6f1..788486e830d3 100644 --- a/arch/arm/mm/cache-v7m.S +++ b/arch/arm/mm/cache-v7m.S @@ -217,7 +217,7 @@ skip: cmp r3, r10 bgt flush_levels finished: - mov r10, #0 @ swith back to cache level 0 + mov r10, #0 @ switch back to cache level 0 write_csselr r10, r3 @ select current cache level in cssr dsb st isb diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index afa64ed5e36b..63eabb06f9f1 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -180,7 +180,7 @@ static void arm_dma_sync_single_for_device(struct device *dev, __dma_page_cpu_to_dev(page, offset, size, dir); } -struct dma_map_ops arm_dma_ops = { +const struct dma_map_ops arm_dma_ops = { .alloc = arm_dma_alloc, .free = arm_dma_free, .mmap = arm_dma_mmap, @@ -204,7 +204,7 @@ static int arm_coherent_dma_mmap(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, dma_addr_t dma_addr, size_t size, unsigned long attrs); -struct dma_map_ops arm_coherent_dma_ops = { +const struct dma_map_ops arm_coherent_dma_ops = { .alloc = arm_coherent_dma_alloc, .free = arm_coherent_dma_free, .mmap = arm_coherent_dma_mmap, @@ -349,7 +349,7 @@ static void __dma_free_buffer(struct page *page, size_t size) static void *__alloc_from_contiguous(struct device *dev, size_t size, pgprot_t prot, struct page **ret_page, const void *caller, bool want_vaddr, - int coherent_flag); + int coherent_flag, gfp_t gfp); static void *__alloc_remap_buffer(struct device *dev, size_t size, gfp_t gfp, pgprot_t prot, struct page **ret_page, @@ -420,7 +420,8 @@ static int __init atomic_pool_init(void) */ if (dev_get_cma_area(NULL)) ptr = __alloc_from_contiguous(NULL, atomic_pool_size, prot, - &page, atomic_pool_init, true, NORMAL); + &page, atomic_pool_init, true, NORMAL, + GFP_KERNEL); else ptr = __alloc_remap_buffer(NULL, atomic_pool_size, gfp, prot, &page, atomic_pool_init, true); @@ -594,14 +595,14 @@ static int __free_from_pool(void *start, size_t size) static void *__alloc_from_contiguous(struct device *dev, size_t size, pgprot_t prot, struct page **ret_page, const void *caller, bool want_vaddr, - int coherent_flag) + int coherent_flag, gfp_t gfp) { unsigned long order = get_order(size); size_t count = size >> PAGE_SHIFT; struct page *page; void *ptr = NULL; - page = dma_alloc_from_contiguous(dev, count, order); + page = dma_alloc_from_contiguous(dev, count, order, gfp); if (!page) return NULL; @@ -655,7 +656,7 @@ static inline pgprot_t __get_dma_pgprot(unsigned long attrs, pgprot_t prot) #define __get_dma_pgprot(attrs, prot) __pgprot(0) #define __alloc_remap_buffer(dev, size, gfp, prot, ret, c, wv) NULL #define __alloc_from_pool(size, ret_page) NULL -#define __alloc_from_contiguous(dev, size, prot, ret, c, wv, coherent_flag) NULL +#define __alloc_from_contiguous(dev, size, prot, ret, c, wv, coherent_flag, gfp) NULL #define __free_from_pool(cpu_addr, size) do { } while (0) #define __free_from_contiguous(dev, page, cpu_addr, size, wv) do { } while (0) #define __dma_free_remap(cpu_addr, size) do { } while (0) @@ -697,7 +698,8 @@ static void *cma_allocator_alloc(struct arm_dma_alloc_args *args, { return __alloc_from_contiguous(args->dev, args->size, args->prot, ret_page, args->caller, - args->want_vaddr, args->coherent_flag); + args->want_vaddr, args->coherent_flag, + args->gfp); } static void cma_allocator_free(struct arm_dma_free_args *args) @@ -1070,7 +1072,7 @@ static void __dma_page_dev_to_cpu(struct page *page, unsigned long off, int arm_dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction dir, unsigned long attrs) { - struct dma_map_ops *ops = get_dma_ops(dev); + const struct dma_map_ops *ops = get_dma_ops(dev); struct scatterlist *s; int i, j; @@ -1104,7 +1106,7 @@ int arm_dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, void arm_dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction dir, unsigned long attrs) { - struct dma_map_ops *ops = get_dma_ops(dev); + const struct dma_map_ops *ops = get_dma_ops(dev); struct scatterlist *s; int i; @@ -1123,7 +1125,7 @@ void arm_dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, void arm_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction dir) { - struct dma_map_ops *ops = get_dma_ops(dev); + const struct dma_map_ops *ops = get_dma_ops(dev); struct scatterlist *s; int i; @@ -1142,7 +1144,7 @@ void arm_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, void arm_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction dir) { - struct dma_map_ops *ops = get_dma_ops(dev); + const struct dma_map_ops *ops = get_dma_ops(dev); struct scatterlist *s; int i; @@ -1174,6 +1176,25 @@ core_initcall(dma_debug_do_init); #ifdef CONFIG_ARM_DMA_USE_IOMMU +static int __dma_info_to_prot(enum dma_data_direction dir, unsigned long attrs) +{ + int prot = 0; + + if (attrs & DMA_ATTR_PRIVILEGED) + prot |= IOMMU_PRIV; + + switch (dir) { + case DMA_BIDIRECTIONAL: + return prot | IOMMU_READ | IOMMU_WRITE; + case DMA_TO_DEVICE: + return prot | IOMMU_READ; + case DMA_FROM_DEVICE: + return prot | IOMMU_WRITE; + default: + return prot; + } +} + /* IOMMU */ static int extend_iommu_mapping(struct dma_iommu_mapping *mapping); @@ -1296,7 +1317,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, unsigned long order = get_order(size); struct page *page; - page = dma_alloc_from_contiguous(dev, count, order); + page = dma_alloc_from_contiguous(dev, count, order, gfp); if (!page) goto error; @@ -1397,7 +1418,8 @@ __iommu_alloc_remap(struct page **pages, size_t size, gfp_t gfp, pgprot_t prot, * Create a mapping in device IO address space for specified pages */ static dma_addr_t -__iommu_create_mapping(struct device *dev, struct page **pages, size_t size) +__iommu_create_mapping(struct device *dev, struct page **pages, size_t size, + unsigned long attrs) { struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT; @@ -1422,7 +1444,7 @@ __iommu_create_mapping(struct device *dev, struct page **pages, size_t size) len = (j - i) << PAGE_SHIFT; ret = iommu_map(mapping->domain, iova, phys, len, - IOMMU_READ|IOMMU_WRITE); + __dma_info_to_prot(DMA_BIDIRECTIONAL, attrs)); if (ret < 0) goto fail; iova += len; @@ -1479,7 +1501,8 @@ static struct page **__iommu_get_pages(void *cpu_addr, unsigned long attrs) } static void *__iommu_alloc_simple(struct device *dev, size_t size, gfp_t gfp, - dma_addr_t *handle, int coherent_flag) + dma_addr_t *handle, int coherent_flag, + unsigned long attrs) { struct page *page; void *addr; @@ -1491,7 +1514,7 @@ static void *__iommu_alloc_simple(struct device *dev, size_t size, gfp_t gfp, if (!addr) return NULL; - *handle = __iommu_create_mapping(dev, &page, size); + *handle = __iommu_create_mapping(dev, &page, size, attrs); if (*handle == DMA_ERROR_CODE) goto err_mapping; @@ -1525,7 +1548,7 @@ static void *__arm_iommu_alloc_attrs(struct device *dev, size_t size, if (coherent_flag == COHERENT || !gfpflags_allow_blocking(gfp)) return __iommu_alloc_simple(dev, size, gfp, handle, - coherent_flag); + coherent_flag, attrs); /* * Following is a work-around (a.k.a. hack) to prevent pages @@ -1540,7 +1563,7 @@ static void *__arm_iommu_alloc_attrs(struct device *dev, size_t size, if (!pages) return NULL; - *handle = __iommu_create_mapping(dev, pages, size); + *handle = __iommu_create_mapping(dev, pages, size, attrs); if (*handle == DMA_ERROR_CODE) goto err_buffer; @@ -1675,27 +1698,6 @@ static int arm_iommu_get_sgtable(struct device *dev, struct sg_table *sgt, GFP_KERNEL); } -static int __dma_direction_to_prot(enum dma_data_direction dir) -{ - int prot; - - switch (dir) { - case DMA_BIDIRECTIONAL: - prot = IOMMU_READ | IOMMU_WRITE; - break; - case DMA_TO_DEVICE: - prot = IOMMU_READ; - break; - case DMA_FROM_DEVICE: - prot = IOMMU_WRITE; - break; - default: - prot = 0; - } - - return prot; -} - /* * Map a part of the scatter-gather list into contiguous io address space */ @@ -1725,7 +1727,7 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg, if (!is_coherent && (attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0) __dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir); - prot = __dma_direction_to_prot(dir); + prot = __dma_info_to_prot(dir, attrs); ret = iommu_map(mapping->domain, iova, phys, len, prot); if (ret < 0) @@ -1933,7 +1935,7 @@ static dma_addr_t arm_coherent_iommu_map_page(struct device *dev, struct page *p if (dma_addr == DMA_ERROR_CODE) return dma_addr; - prot = __dma_direction_to_prot(dir); + prot = __dma_info_to_prot(dir, attrs); ret = iommu_map(mapping->domain, dma_addr, page_to_phys(page), len, prot); if (ret < 0) @@ -2039,7 +2041,7 @@ static dma_addr_t arm_iommu_map_resource(struct device *dev, if (dma_addr == DMA_ERROR_CODE) return dma_addr; - prot = __dma_direction_to_prot(dir) | IOMMU_MMIO; + prot = __dma_info_to_prot(dir, attrs) | IOMMU_MMIO; ret = iommu_map(mapping->domain, dma_addr, addr, len, prot); if (ret < 0) @@ -2102,7 +2104,7 @@ static void arm_iommu_sync_single_for_device(struct device *dev, __dma_page_cpu_to_dev(page, offset, size, dir); } -struct dma_map_ops iommu_ops = { +const struct dma_map_ops iommu_ops = { .alloc = arm_iommu_alloc_attrs, .free = arm_iommu_free_attrs, .mmap = arm_iommu_mmap_attrs, @@ -2122,7 +2124,7 @@ struct dma_map_ops iommu_ops = { .unmap_resource = arm_iommu_unmap_resource, }; -struct dma_map_ops iommu_coherent_ops = { +const struct dma_map_ops iommu_coherent_ops = { .alloc = arm_coherent_iommu_alloc_attrs, .free = arm_coherent_iommu_free_attrs, .mmap = arm_coherent_iommu_mmap_attrs, @@ -2322,7 +2324,7 @@ void arm_iommu_detach_device(struct device *dev) } EXPORT_SYMBOL_GPL(arm_iommu_detach_device); -static struct dma_map_ops *arm_get_iommu_dma_map_ops(bool coherent) +static const struct dma_map_ops *arm_get_iommu_dma_map_ops(bool coherent) { return coherent ? &iommu_coherent_ops : &iommu_ops; } @@ -2377,7 +2379,7 @@ static void arm_teardown_iommu_dma_ops(struct device *dev) { } #endif /* CONFIG_ARM_DMA_USE_IOMMU */ -static struct dma_map_ops *arm_get_dma_map_ops(bool coherent) +static const struct dma_map_ops *arm_get_dma_map_ops(bool coherent) { return coherent ? &arm_coherent_dma_ops : &arm_dma_ops; } @@ -2385,7 +2387,7 @@ static struct dma_map_ops *arm_get_dma_map_ops(bool coherent) void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, const struct iommu_ops *iommu, bool coherent) { - struct dma_map_ops *dma_ops; + const struct dma_map_ops *dma_ops; dev->archdata.dma_coherent = coherent; if (arm_setup_iommu_dma_ops(dev, dma_base, size, iommu)) diff --git a/arch/arm/mm/extable.c b/arch/arm/mm/extable.c index 312e15e6d00b..f436f7439e46 100644 --- a/arch/arm/mm/extable.c +++ b/arch/arm/mm/extable.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mm/extable.c */ -#include <linux/module.h> +#include <linux/extable.h> #include <linux/uaccess.h> int fixup_exception(struct pt_regs *regs) diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 0122ad1a6027..c2b5b9892fd1 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -8,7 +8,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <linux/module.h> +#include <linux/extable.h> #include <linux/signal.h> #include <linux/mm.h> #include <linux/hardirq.h> diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index d1e26610977d..bf4d3bc41a7a 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -590,7 +590,7 @@ void __init mem_init(void) } } -#ifdef CONFIG_DEBUG_RODATA +#ifdef CONFIG_STRICT_KERNEL_RWX struct section_perm { const char *name; unsigned long start; @@ -759,7 +759,7 @@ void set_kernel_text_ro(void) #else static inline void fix_kernmem_perms(void) { } -#endif /* CONFIG_DEBUG_RODATA */ +#endif /* CONFIG_STRICT_KERNEL_RWX */ void free_tcmmem(void) { diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 272f49b2c68f..9255b6d67ba5 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -22,6 +22,7 @@ #include <linux/platform_data/dma-mv_xor.h> #include <linux/platform_data/usb-ehci-orion.h> #include <plat/common.h> +#include <linux/phy.h> /* Create a clkdev entry for a given device/clk */ void __init orion_clkdev_add(const char *con_id, const char *dev_id, @@ -470,15 +471,27 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data, /***************************************************************************** * Ethernet switch ****************************************************************************/ -void __init orion_ge00_switch_init(struct dsa_platform_data *d) +static __initconst const char *orion_ge00_mvmdio_bus_name = "orion-mii"; +static __initdata struct mdio_board_info + orion_ge00_switch_board_info; + +void __init orion_ge00_switch_init(struct dsa_chip_data *d) { - int i; + struct mdio_board_info *bd; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(d->port_names); i++) + if (!strcmp(d->port_names[i], "cpu")) + break; - d->netdev = &orion_ge00.dev; - for (i = 0; i < d->nr_chips; i++) - d->chip[i].host_dev = &orion_ge_mvmdio.dev; + bd = &orion_ge00_switch_board_info; + bd->bus_id = orion_ge00_mvmdio_bus_name; + bd->mdio_addr = d->sw_addr; + d->netdev[i] = &orion_ge00.dev; + strcpy(bd->modalias, "mv88e6085"); + bd->platform_data = d; - platform_device_register_data(NULL, "dsa", 0, d, sizeof(d)); + mdiobus_register_board_info(&orion_ge00_switch_board_info, 1); } /***************************************************************************** diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index 9347f3c58a6d..3647d3b33c20 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -12,7 +12,7 @@ #include <linux/mv643xx_eth.h> #include <linux/platform_data/usb-ehci-orion.h> -struct dsa_platform_data; +struct dsa_chip_data; struct mv_sata_platform_data; void __init orion_uart0_init(void __iomem *membase, @@ -57,7 +57,7 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq); -void __init orion_ge00_switch_init(struct dsa_platform_data *d); +void __init orion_ge00_switch_init(struct dsa_chip_data *d); void __init orion_i2c_init(unsigned long mapbase, unsigned long irq, diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index cf7b95fddbb3..03fac123676d 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -77,15 +77,6 @@ static struct resource s3c_ac97_resource[] = { [1] = DEFINE_RES_IRQ(IRQ_S3C244X_AC97), }; -static struct s3c_audio_pdata s3c_ac97_pdata = { -#ifdef CONFIG_S3C24XX_DMAC - .dma_filter = s3c24xx_dma_filter, -#endif - .dma_playback = (void *)DMACH_PCM_OUT, - .dma_capture = (void *)DMACH_PCM_IN, - .dma_capture_mic = (void *)DMACH_MIC_IN, -}; - struct platform_device s3c_device_ac97 = { .name = "samsung-ac97", .id = -1, @@ -94,7 +85,6 @@ struct platform_device s3c_device_ac97 = { .dev = { .dma_mask = &samsung_device_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s3c_ac97_pdata, } }; #endif /* CONFIG_CPU_S3C2440 */ @@ -574,14 +564,6 @@ static struct resource s3c_iis_resource[] = { [0] = DEFINE_RES_MEM(S3C24XX_PA_IIS, S3C24XX_SZ_IIS), }; -static struct s3c_audio_pdata s3c_iis_platdata = { -#ifdef CONFIG_S3C24XX_DMAC - .dma_filter = s3c24xx_dma_filter, -#endif - .dma_playback = (void *)DMACH_I2S_OUT, - .dma_capture = (void *)DMACH_I2S_IN, -}; - struct platform_device s3c_device_iis = { .name = "s3c24xx-iis", .id = -1, @@ -590,7 +572,6 @@ struct platform_device s3c_device_iis = { .dev = { .dma_mask = &samsung_device_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s3c_iis_platdata, } }; #endif /* CONFIG_PLAT_S3C24XX */ diff --git a/arch/arm/plat-samsung/include/plat/wakeup-mask.h b/arch/arm/plat-samsung/include/plat/wakeup-mask.h index 43e4acd2e1c6..bbfa84b0505a 100644 --- a/arch/arm/plat-samsung/include/plat/wakeup-mask.h +++ b/arch/arm/plat-samsung/include/plat/wakeup-mask.h @@ -38,7 +38,7 @@ struct samsung_wakeup_mask { * required to be correct before we enter sleep. */ extern void samsung_sync_wakemask(void __iomem *reg, - struct samsung_wakeup_mask *masks, + const struct samsung_wakeup_mask *masks, int nr_masks); #endif /* __PLAT_WAKEUP_MASK_H */ diff --git a/arch/arm/plat-samsung/wakeup-mask.c b/arch/arm/plat-samsung/wakeup-mask.c index 20c3d9117cc2..b9de6b543330 100644 --- a/arch/arm/plat-samsung/wakeup-mask.c +++ b/arch/arm/plat-samsung/wakeup-mask.c @@ -20,7 +20,7 @@ #include <plat/pm.h> void samsung_sync_wakemask(void __iomem *reg, - struct samsung_wakeup_mask *mask, int nr_mask) + const struct samsung_wakeup_mask *mask, int nr_mask) { struct irq_data *data; u32 val; diff --git a/arch/arm/probes/decode.h b/arch/arm/probes/decode.h index f9b08ba7fe73..548d622a3159 100644 --- a/arch/arm/probes/decode.h +++ b/arch/arm/probes/decode.h @@ -22,6 +22,7 @@ #include <linux/types.h> #include <linux/stddef.h> #include <asm/probes.h> +#include <asm/kprobes.h> void __init arm_probes_decode_init(void); diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 11d9f2898b16..81e3217b12d3 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -457,4 +457,5 @@ EXPORT_SYMBOL_GPL(HYPERVISOR_tmem_op); EXPORT_SYMBOL_GPL(HYPERVISOR_platform_op); EXPORT_SYMBOL_GPL(HYPERVISOR_multicall); EXPORT_SYMBOL_GPL(HYPERVISOR_vm_assist); +EXPORT_SYMBOL_GPL(HYPERVISOR_dm_op); EXPORT_SYMBOL_GPL(privcmd_call); diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S index a648dfc3be30..b0b80c0f09f3 100644 --- a/arch/arm/xen/hypercall.S +++ b/arch/arm/xen/hypercall.S @@ -92,6 +92,7 @@ HYPERCALL1(tmem_op); HYPERCALL1(platform_op_raw); HYPERCALL2(multicall); HYPERCALL2(vm_assist); +HYPERCALL3(dm_op); ENTRY(privcmd_call) stmdb sp!, {r4} diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index bd62d94f8ac5..ce18c91b50a1 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -182,10 +182,10 @@ void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order) } EXPORT_SYMBOL_GPL(xen_destroy_contiguous_region); -struct dma_map_ops *xen_dma_ops; +const struct dma_map_ops *xen_dma_ops; EXPORT_SYMBOL(xen_dma_ops); -static struct dma_map_ops xen_swiotlb_dma_ops = { +static const struct dma_map_ops xen_swiotlb_dma_ops = { .alloc = xen_swiotlb_alloc_coherent, .free = xen_swiotlb_free_coherent, .sync_single_for_cpu = xen_swiotlb_sync_single_for_cpu, |
