diff options
Diffstat (limited to 'arch/arm')
235 files changed, 1539 insertions, 2715 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 24626b0419ee..a48aecc17eac 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -754,7 +754,7 @@ config ARCH_SA1100 select ARCH_HAS_CPUFREQ select CPU_FREQ select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP + select HAVE_CLK select HAVE_SCHED_CLOCK select TICK_ONESHOT select ARCH_REQUIRE_GPIOLIB @@ -825,7 +825,6 @@ config ARCH_S5PC100 select HAVE_CLK select CLKDEV_LOOKUP select CPU_V7 - select ARM_L1_CACHE_SHIFT_6 select ARCH_USES_GETTIMEOFFSET select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS @@ -842,7 +841,6 @@ config ARCH_S5PV210 select HAVE_CLK select CLKDEV_LOOKUP select CLKSRC_MMIO - select ARM_L1_CACHE_SHIFT_6 select ARCH_HAS_CPUFREQ select GENERIC_CLOCKEVENTS select HAVE_SCHED_CLOCK diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 40319d91bb7f..1683bfb9166f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -160,7 +160,6 @@ machine-$(CONFIG_ARCH_MSM) := msm machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 machine-$(CONFIG_ARCH_IMX_V4_V5) := imx machine-$(CONFIG_ARCH_IMX_V6_V7) := imx -machine-$(CONFIG_ARCH_MX5) := mx5 machine-$(CONFIG_ARCH_MXS) := mxs machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NOMADIK) := nomadik diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 63d7578856c1..a1dd2ee83753 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -29,6 +29,7 @@ compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; + cpu-offset = <0x8000>; reg = <0x10490000 0x1000>, <0x10480000 0x100>; }; diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts index 1a1d7023b69b..825d2957da0b 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra-paz00.dts @@ -46,11 +46,11 @@ }; serial@70006200 { - status = "disable"; + clock-frequency = <216000000>; }; serial@70006300 { - clock-frequency = <216000000>; + status = "disable"; }; serial@70006400 { @@ -60,7 +60,7 @@ sdhci@c8000000 { cd-gpios = <&gpio 173 0>; /* gpio PV5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 155 0>; /* gpio PT3 */ + power-gpios = <&gpio 169 0>; /* gpio PV1 */ }; sdhci@c8000200 { diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index b2dc2dd7f1df..c47d6199b784 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -41,6 +41,7 @@ #include <asm/irq.h> #include <asm/exception.h> +#include <asm/smp_plat.h> #include <asm/mach/irq.h> #include <asm/hardware/gic.h> @@ -352,11 +353,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic) unsigned int gic_irqs = gic->gic_irqs; struct irq_domain *domain = &gic->domain; void __iomem *base = gic_data_dist_base(gic); - u32 cpu = 0; - -#ifdef CONFIG_SMP - cpu = cpu_logical_map(smp_processor_id()); -#endif + u32 cpu = cpu_logical_map(smp_processor_id()); cpumask = 1 << cpu; cpumask |= cpumask << 8; diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index d1bcd7b13ebc..fb1f1cfce60c 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -320,13 +320,6 @@ err0: return -EBUSY; } -/* - * If we set up a device for bus mastering, we need to check the latency - * timer as we don't have even crappy BIOSes to set it properly. - * The implementation is from arch/i386/pci/i386.c - */ -unsigned int pcibios_max_latency = 255; - /* ITE bridge requires setting latency timer to avoid early bus access termination by PCI bus master devices */ diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index d8e44a43047c..ff3ad2244824 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) struct pl330_thread *thrd = ch_id; struct pl330_dmac *pl330; unsigned long flags; - int ret = 0, active = thrd->req_running; + int ret = 0, active; if (!thrd || thrd->free || thrd->dmac->state == DYING) return -EINVAL; pl330 = thrd->dmac; + active = thrd->req_running; spin_lock_irqsave(&pl330->lock, flags); diff --git a/arch/arm/configs/mx5_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index d0d8dfece37e..3a4fb2e5fc68 100644 --- a/arch/arm/configs/mx5_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -3,6 +3,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_KERNEL_LZO=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=18 +CONFIG_CGROUPS=y CONFIG_RELAY=y CONFIG_EXPERT=y # CONFIG_SLUB_DEBUG is not set @@ -14,20 +15,31 @@ CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MXC=y -CONFIG_ARCH_MX5=y -CONFIG_MACH_MX51_BABBAGE=y +CONFIG_MACH_MX31LILLY=y +CONFIG_MACH_MX31LITE=y +CONFIG_MACH_PCM037=y +CONFIG_MACH_PCM037_EET=y +CONFIG_MACH_MX31_3DS=y +CONFIG_MACH_MX31MOBOARD=y +CONFIG_MACH_QONG=y +CONFIG_MACH_ARMADILLO5X0=y +CONFIG_MACH_KZM_ARM11_01=y +CONFIG_MACH_PCM043=y +CONFIG_MACH_MX35_3DS=y +CONFIG_MACH_EUKREA_CPUIMX35=y +CONFIG_MACH_VPR200=y +CONFIG_MACH_IMX51_DT=y CONFIG_MACH_MX51_3DS=y CONFIG_MACH_EUKREA_CPUIMX51=y CONFIG_MACH_EUKREA_CPUIMX51SD=y CONFIG_MACH_MX51_EFIKAMX=y CONFIG_MACH_MX51_EFIKASB=y -CONFIG_MACH_MX53_EVK=y -CONFIG_MACH_MX53_SMD=y -CONFIG_MACH_MX53_LOCO=y -CONFIG_MACH_MX53_ARD=y +CONFIG_MACH_IMX53_DT=y +CONFIG_SOC_IMX6Q=y CONFIG_MXC_PWM=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_SMP=y CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y @@ -49,7 +61,7 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=y # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -68,24 +80,20 @@ CONFIG_SCSI_SCAN_ASYNC=y CONFIG_ATA=y CONFIG_PATA_IMX=y CONFIG_NETDEVICES=y -CONFIG_MII=m -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -CONFIG_BROADCOM_PHY=y -CONFIG_ICPLUS_PHY=y -CONFIG_REALTEK_PHY=y -CONFIG_NATIONAL_PHY=y -CONFIG_STE10XP=y -CONFIG_LSI_ET1011C_PHY=y -CONFIG_MICREL_PHY=y -CONFIG_NET_ETHERNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_FARADAY is not set +CONFIG_FEC=y +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_SMC91X=y +CONFIG_SMC911X=y +CONFIG_SMSC911X=y +# CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y @@ -124,7 +132,6 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y CONFIG_USB_STORAGE=y CONFIG_MMC=y -CONFIG_MMC_BLOCK=m CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y @@ -133,6 +140,8 @@ CONFIG_LEDS_CLASS=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_MXC=y +CONFIG_DMADEVICES=y +CONFIG_IMX_SDMA=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig deleted file mode 100644 index cb0717fbb03d..000000000000 --- a/arch/arm/configs/mx3_defconfig +++ /dev/null @@ -1,144 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_MXC=y -CONFIG_MACH_MX31ADS_WM1133_EV1=y -CONFIG_MACH_MX31LILLY=y -CONFIG_MACH_MX31LITE=y -CONFIG_MACH_PCM037=y -CONFIG_MACH_PCM037_EET=y -CONFIG_MACH_MX31_3DS=y -CONFIG_MACH_MX31MOBOARD=y -CONFIG_MACH_QONG=y -CONFIG_MACH_ARMADILLO5X0=y -CONFIG_MACH_KZM_ARM11_01=y -CONFIG_MACH_PCM043=y -CONFIG_MACH_MX35_3DS=y -CONFIG_MACH_EUKREA_CPUIMX35=y -CONFIG_MXC_IRQ_PRIOR=y -CONFIG_MXC_PWM=y -CONFIG_ARM_ERRATA_411920=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -CONFIG_VFP=y -CONFIG_PM_DEBUG=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_MXC=y -CONFIG_MTD_UBI=y -# CONFIG_BLK_DEV is not set -CONFIG_MISC_DEVICES=y -CONFIG_EEPROM_AT24=y -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_SMSC911X=y -CONFIG_DNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_IMX=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_IMX=y -CONFIG_SPI=y -CONFIG_W1=y -CONFIG_W1_MASTER_MXC=y -CONFIG_W1_SLAVE_THERM=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_IMX2_WDT=y -CONFIG_MFD_WM8350_I2C=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_WM8350=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_VIDEO_DEV=y -# CONFIG_RC_CORE is not set -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_SOC_CAMERA=y -CONFIG_SOC_CAMERA_MT9M001=y -CONFIG_SOC_CAMERA_MT9M111=y -CONFIG_SOC_CAMERA_MT9T031=y -CONFIG_SOC_CAMERA_MT9V022=y -CONFIG_SOC_CAMERA_TW9910=y -CONFIG_SOC_CAMERA_OV772X=y -CONFIG_VIDEO_MX3=y -# CONFIG_RADIO_ADAPTERS is not set -CONFIG_FB=y -CONFIG_SOUND=y -CONFIG_SND=y -# CONFIG_SND_ARM is not set -# CONFIG_SND_SPI is not set -CONFIG_SND_SOC=y -CONFIG_SND_IMX_SOC=y -CONFIG_SND_MXC_SOC_WM1133_EV1=y -CONFIG_SND_SOC_PHYCORE_AC97=y -CONFIG_SND_SOC_EUKREA_TLV320=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_MXC=y -CONFIG_USB_GADGET=m -CONFIG_USB_FSL_USB2=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_ULPI=y -CONFIG_MMC=y -CONFIG_MMC_MXC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_MXC=y -CONFIG_DMADEVICES=y -# CONFIG_DNOTIFY is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_UBIFS_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index b6e65dedfd71..23371b17b23e 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -137,6 +137,11 @@ disable_irq .endm + .macro save_and_disable_irqs_notrace, oldcpsr + mrs \oldcpsr, cpsr + disable_irq_notrace + .endm + /* * Restore interrupt state previously stored in a register. We don't * guarantee that this will preserve the flags. @@ -237,7 +242,7 @@ */ #ifdef CONFIG_THUMB2_KERNEL - .macro usraccoff, instr, reg, ptr, inc, off, cond, abort, t=T() + .macro usraccoff, instr, reg, ptr, inc, off, cond, abort, t=TUSER() 9999: .if \inc == 1 \instr\cond\()b\()\t\().w \reg, [\ptr, #\off] @@ -277,7 +282,7 @@ #else /* !CONFIG_THUMB2_KERNEL */ - .macro usracc, instr, reg, ptr, inc, cond, rept, abort, t=T() + .macro usracc, instr, reg, ptr, inc, cond, rept, abort, t=TUSER() .rept \rept 9999: .if \inc == 1 diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h index af18ceaacf5d..b5dc173d336f 100644 --- a/arch/arm/include/asm/domain.h +++ b/arch/arm/include/asm/domain.h @@ -83,9 +83,9 @@ * instructions (inline assembly) */ #ifdef CONFIG_CPU_USE_DOMAINS -#define T(instr) #instr "t" +#define TUSER(instr) #instr "t" #else -#define T(instr) #instr +#define TUSER(instr) #instr #endif #else /* __ASSEMBLY__ */ @@ -95,9 +95,9 @@ * instructions */ #ifdef CONFIG_CPU_USE_DOMAINS -#define T(instr) instr ## t +#define TUSER(instr) instr ## t #else -#define T(instr) instr +#define TUSER(instr) instr #endif #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 253cc86318bf..7be54690aeec 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -75,9 +75,9 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, #define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ __asm__ __volatile__( \ - "1: " T(ldr) " %1, [%3]\n" \ + "1: " TUSER(ldr) " %1, [%3]\n" \ " " insn "\n" \ - "2: " T(str) " %0, [%3]\n" \ + "2: " TUSER(str) " %0, [%3]\n" \ " mov %0, #0\n" \ __futex_atomic_ex_table("%5") \ : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ @@ -95,10 +95,10 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, return -EFAULT; __asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n" - "1: " T(ldr) " %1, [%4]\n" + "1: " TUSER(ldr) " %1, [%4]\n" " teq %1, %2\n" " it eq @ explicit IT needed for the 2b label\n" - "2: " T(streq) " %3, [%4]\n" + "2: " TUSER(streq) " %3, [%4]\n" __futex_atomic_ex_table("%5") : "+r" (ret), "=&r" (val) : "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT) diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h index 575fa8186ca0..c1821385abfa 100644 --- a/arch/arm/include/asm/hardware/pl330.h +++ b/arch/arm/include/asm/hardware/pl330.h @@ -41,7 +41,7 @@ enum pl330_dstcachectrl { DCCTRL1, /* Bufferable only */ DCCTRL2, /* Cacheable, but do not allocate */ DCCTRL3, /* Cacheable and bufferable, but do not allocate */ - DINVALID1 = 8, + DINVALID1, /* AWCACHE = 0x1000 */ DINVALID2, DCCTRL6, /* Cacheable write-through, allocate on writes only */ DCCTRL7, /* Cacheable write-back, allocate on writes only */ diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index ce280b8d613c..cb8d638924fd 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -22,6 +22,7 @@ #include <asm/hw_breakpoint.h> #include <asm/ptrace.h> #include <asm/types.h> +#include <asm/system.h> #ifdef __KERNEL__ #define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \ diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 1e5717afc4ac..ae29293270a3 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -71,12 +71,6 @@ extern void platform_secondary_init(unsigned int cpu); extern void platform_smp_prepare_cpus(unsigned int); /* - * Logical CPU mapping. - */ -extern int __cpu_logical_map[NR_CPUS]; -#define cpu_logical_map(cpu) __cpu_logical_map[cpu] - -/* * Initial data for bringing up a secondary CPU. */ struct secondary_data { diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h index f24c1b9e211d..558d6c80aca9 100644 --- a/arch/arm/include/asm/smp_plat.h +++ b/arch/arm/include/asm/smp_plat.h @@ -43,4 +43,10 @@ static inline int cache_ops_need_broadcast(void) } #endif +/* + * Logical CPU mapping. + */ +extern int __cpu_logical_map[]; +#define cpu_logical_map(cpu) __cpu_logical_map[cpu] + #endif diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 5d3ed7e38561..314d4664eae7 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -198,7 +198,15 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, unsigned long addr) { pgtable_page_dtor(pte); - tlb_add_flush(tlb, addr); + + /* + * With the classic ARM MMU, a pte page has two corresponding pmd + * entries, each covering 1MB. + */ + addr &= PMD_MASK; + tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE); + tlb_add_flush(tlb, addr + SZ_1M); + tlb_remove_page(tlb, pte); } diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index b293616a1a1a..2958976d867b 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -227,7 +227,7 @@ do { \ #define __get_user_asm_byte(x,addr,err) \ __asm__ __volatile__( \ - "1: " T(ldrb) " %1,[%2],#0\n" \ + "1: " TUSER(ldrb) " %1,[%2],#0\n" \ "2:\n" \ " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ @@ -263,7 +263,7 @@ do { \ #define __get_user_asm_word(x,addr,err) \ __asm__ __volatile__( \ - "1: " T(ldr) " %1,[%2],#0\n" \ + "1: " TUSER(ldr) " %1,[%2],#0\n" \ "2:\n" \ " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ @@ -308,7 +308,7 @@ do { \ #define __put_user_asm_byte(x,__pu_addr,err) \ __asm__ __volatile__( \ - "1: " T(strb) " %1,[%2],#0\n" \ + "1: " TUSER(strb) " %1,[%2],#0\n" \ "2:\n" \ " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ @@ -341,7 +341,7 @@ do { \ #define __put_user_asm_word(x,__pu_addr,err) \ __asm__ __volatile__( \ - "1: " T(str) " %1,[%2],#0\n" \ + "1: " TUSER(str) " %1,[%2],#0\n" \ "2:\n" \ " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ @@ -366,10 +366,10 @@ do { \ #define __put_user_asm_dword(x,__pu_addr,err) \ __asm__ __volatile__( \ - ARM( "1: " T(str) " " __reg_oper1 ", [%1], #4\n" ) \ - ARM( "2: " T(str) " " __reg_oper0 ", [%1]\n" ) \ - THUMB( "1: " T(str) " " __reg_oper1 ", [%1]\n" ) \ - THUMB( "2: " T(str) " " __reg_oper0 ", [%1, #4]\n" ) \ + ARM( "1: " TUSER(str) " " __reg_oper1 ", [%1], #4\n" ) \ + ARM( "2: " TUSER(str) " " __reg_oper0 ", [%1]\n" ) \ + THUMB( "1: " TUSER(str) " " __reg_oper1 ", [%1]\n" ) \ + THUMB( "2: " TUSER(str) " " __reg_oper0 ", [%1, #4]\n" ) \ "3:\n" \ " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 3a456c6c7005..be16a48007b4 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -790,7 +790,7 @@ __kuser_cmpxchg64: @ 0xffff0f60 smp_dmb arm rsbs r0, r3, #0 @ set returned val and C flag ldmfd sp!, {r4, r5, r6, r7} - bx lr + usr_ret lr #elif !defined(CONFIG_SMP) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 520889cf1b5b..9fd0ba90c1d2 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -149,6 +149,11 @@ ENDPROC(ret_from_fork) #endif #endif +.macro mcount_adjust_addr rd, rn + bic \rd, \rn, #1 @ clear the Thumb bit if present + sub \rd, \rd, #MCOUNT_INSN_SIZE +.endm + .macro __mcount suffix mcount_enter ldr r0, =ftrace_trace_function @@ -173,8 +178,7 @@ ENDPROC(ret_from_fork) mcount_exit 1: mcount_get_lr r1 @ lr of instrumented func - mov r0, lr @ instrumented function - sub r0, r0, #MCOUNT_INSN_SIZE + mcount_adjust_addr r0, lr @ instrumented function adr lr, BSYM(2f) mov pc, r2 2: mcount_exit @@ -184,8 +188,7 @@ ENDPROC(ret_from_fork) mcount_enter mcount_get_lr r1 @ lr of instrumented func - mov r0, lr @ instrumented function - sub r0, r0, #MCOUNT_INSN_SIZE + mcount_adjust_addr r0, lr @ instrumented function .globl ftrace_call\suffix ftrace_call\suffix: @@ -205,11 +208,11 @@ ftrace_graph_call\suffix: #ifdef CONFIG_DYNAMIC_FTRACE @ called from __ftrace_caller, saved in mcount_enter ldr r1, [sp, #16] @ instrumented routine (func) + mcount_adjust_addr r1, r1 #else @ called from __mcount, untouched in lr - mov r1, lr @ instrumented routine (func) + mcount_adjust_addr r1, lr @ instrumented routine (func) #endif - sub r1, r1, #MCOUNT_INSN_SIZE mov r2, fp @ frame pointer bl prepare_ftrace_return mcount_exit diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 460bbbb6b885..6933244c68f9 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -469,6 +469,20 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, }, + [C(NODE)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, }; /* @@ -579,6 +593,20 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, }, + [C(NODE)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, }; /* diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index e1d5e1929fbd..ede6443c34d9 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -23,6 +23,7 @@ #include <linux/perf_event.h> #include <linux/hw_breakpoint.h> #include <linux/regset.h> +#include <linux/audit.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -699,10 +700,13 @@ static int vfp_set(struct task_struct *target, { int ret; struct thread_info *thread = task_thread_info(target); - struct vfp_hard_struct new_vfp = thread->vfpstate.hard; + struct vfp_hard_struct new_vfp; const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs); const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr); + vfp_sync_hwstate(thread); + new_vfp = thread->vfpstate.hard; + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &new_vfp.fpregs, user_fpregs_offset, @@ -723,9 +727,8 @@ static int vfp_set(struct task_struct *target, if (ret) return ret; - vfp_sync_hwstate(thread); - thread->vfpstate.hard = new_vfp; vfp_flush_hwstate(thread); + thread->vfpstate.hard = new_vfp; return 0; } @@ -902,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request, return ret; } +#ifdef __ARMEB__ +#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB +#else +#define AUDIT_ARCH_NR AUDIT_ARCH_ARM +#endif + asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) { unsigned long ip; @@ -916,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) if (!ip) audit_syscall_exit(regs); else - audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0, + audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); if (!test_thread_flag(TIF_SYSCALL_TRACE)) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 129fbd55bde8..a255c39612ca 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -21,7 +21,6 @@ #include <linux/init.h> #include <linux/kexec.h> #include <linux/of_fdt.h> -#include <linux/crash_dump.h> #include <linux/root_dev.h> #include <linux/cpu.h> #include <linux/interrupt.h> @@ -160,7 +159,7 @@ static struct resource mem_res[] = { .flags = IORESOURCE_MEM }, { - .name = "Kernel text", + .name = "Kernel code", .start = 0, .end = 0, .flags = IORESOURCE_MEM @@ -427,6 +426,20 @@ void cpu_init(void) : "r14"); } +int __cpu_logical_map[NR_CPUS]; + +void __init smp_setup_processor_id(void) +{ + int i; + u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0; + + cpu_logical_map(0) = cpu; + for (i = 1; i < NR_CPUS; ++i) + cpu_logical_map(i) = i == cpu ? 0 : i; + + printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu); +} + static void __init setup_processor(void) { struct proc_info_list *list; diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 0340224cf73c..9e617bd4a146 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -227,6 +227,8 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame) if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE) return -EINVAL; + vfp_flush_hwstate(thread); + /* * Copy the floating point registers. There can be unused * registers see asm/hwcap.h for details. @@ -251,9 +253,6 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame) __get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); __get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); - if (!err) - vfp_flush_hwstate(thread); - return err ? -EFAULT : 0; } diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 57db122a4f62..cdeb727527d3 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -233,20 +233,6 @@ void __ref cpu_die(void) } #endif /* CONFIG_HOTPLUG_CPU */ -int __cpu_logical_map[NR_CPUS]; - -void __init smp_setup_processor_id(void) -{ - int i; - u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0; - - cpu_logical_map(0) = cpu; - for (i = 1; i < NR_CPUS; ++i) - cpu_logical_map(i) = i == cpu ? 0 : i; - - printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu); -} - /* * Called by both boot and secondaries to move global data into * per-processor storage. @@ -443,9 +429,7 @@ static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent); static void ipi_timer(void) { struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent); - irq_enter(); evt->event_handler(evt); - irq_exit(); } #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST @@ -548,7 +532,9 @@ void handle_IPI(int ipinr, struct pt_regs *regs) switch (ipinr) { case IPI_TIMER: + irq_enter(); ipi_timer(); + irq_exit(); break; case IPI_RESCHEDULE: @@ -556,15 +542,21 @@ void handle_IPI(int ipinr, struct pt_regs *regs) break; case IPI_CALL_FUNC: + irq_enter(); generic_smp_call_function_interrupt(); + irq_exit(); break; case IPI_CALL_FUNC_SINGLE: + irq_enter(); generic_smp_call_function_single_interrupt(); + irq_exit(); break; case IPI_CPU_STOP: + irq_enter(); ipi_cpu_stop(cpu); + irq_exit(); break; default: diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index c8e938553d47..7a79b24597b2 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -129,7 +129,7 @@ static struct notifier_block twd_cpufreq_nb = { static int twd_cpufreq_init(void) { - if (!IS_ERR(twd_clk)) + if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) return cpufreq_register_notifier(&twd_cpufreq_nb, CPUFREQ_TRANSITION_NOTIFIER); @@ -252,6 +252,8 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) else twd_calibrate_rate(); + __raw_writel(0, twd_base + TWD_TIMER_CONTROL); + clk->name = "local_timer"; clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 99a572702509..f84dfe67724f 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -266,6 +266,7 @@ void die(const char *str, struct pt_regs *regs, int err) { struct thread_info *thread = current_thread_info(); int ret; + enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE; oops_enter(); @@ -273,7 +274,9 @@ void die(const char *str, struct pt_regs *regs, int err) console_verbose(); bust_spinlocks(1); if (!user_mode(regs)) - report_bug(regs->ARM_pc, regs); + bug_type = report_bug(regs->ARM_pc, regs); + if (bug_type != BUG_TRAP_TYPE_NONE) + str = "Oops - BUG"; ret = __die(str, err, thread, regs); if (regs && kexec_should_crash(thread->task)) diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index f76e75548670..43a31fb06318 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -4,11 +4,13 @@ */ #include <asm-generic/vmlinux.lds.h> +#include <asm/cache.h> #include <asm/thread_info.h> #include <asm/memory.h> #include <asm/page.h> #define PROC_INFO \ + . = ALIGN(4); \ VMLINUX_SYMBOL(__proc_info_begin) = .; \ *(.proc.info.init) \ VMLINUX_SYMBOL(__proc_info_end) = .; @@ -181,7 +183,7 @@ SECTIONS } #endif - PERCPU_SECTION(32) + PERCPU_SECTION(L1_CACHE_BYTES) #ifdef CONFIG_XIP_KERNEL __data_loc = ALIGN(4); /* location in binary */ @@ -212,13 +214,13 @@ SECTIONS #endif NOSAVE_DATA - CACHELINE_ALIGNED_DATA(32) - READ_MOSTLY_DATA(32) + CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) + READ_MOSTLY_DATA(L1_CACHE_BYTES) /* * The exception fixup table (might need resorting at runtime) */ - . = ALIGN(32); + . = ALIGN(4); __start___ex_table = .; #ifdef CONFIG_MMU *(__ex_table) diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 1b049cd7a49a..11093a7c3e32 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -31,18 +31,18 @@ #include <asm/domain.h> ENTRY(__get_user_1) -1: T(ldrb) r2, [r0] +1: TUSER(ldrb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__get_user_1) ENTRY(__get_user_2) #ifdef CONFIG_THUMB2_KERNEL -2: T(ldrb) r2, [r0] -3: T(ldrb) r3, [r0, #1] +2: TUSER(ldrb) r2, [r0] +3: TUSER(ldrb) r3, [r0, #1] #else -2: T(ldrb) r2, [r0], #1 -3: T(ldrb) r3, [r0] +2: TUSER(ldrb) r2, [r0], #1 +3: TUSER(ldrb) r3, [r0] #endif #ifndef __ARMEB__ orr r2, r2, r3, lsl #8 @@ -54,7 +54,7 @@ ENTRY(__get_user_2) ENDPROC(__get_user_2) ENTRY(__get_user_4) -4: T(ldr) r2, [r0] +4: TUSER(ldr) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__get_user_4) diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index c023fc11e86c..7db25990c589 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -31,7 +31,7 @@ #include <asm/domain.h> ENTRY(__put_user_1) -1: T(strb) r2, [r0] +1: TUSER(strb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_1) @@ -40,19 +40,19 @@ ENTRY(__put_user_2) mov ip, r2, lsr #8 #ifdef CONFIG_THUMB2_KERNEL #ifndef __ARMEB__ -2: T(strb) r2, [r0] -3: T(strb) ip, [r0, #1] +2: TUSER(strb) r2, [r0] +3: TUSER(strb) ip, [r0, #1] #else -2: T(strb) ip, [r0] -3: T(strb) r2, [r0, #1] +2: TUSER(strb) ip, [r0] +3: TUSER(strb) r2, [r0, #1] #endif #else /* !CONFIG_THUMB2_KERNEL */ #ifndef __ARMEB__ -2: T(strb) r2, [r0], #1 -3: T(strb) ip, [r0] +2: TUSER(strb) r2, [r0], #1 +3: TUSER(strb) ip, [r0] #else -2: T(strb) ip, [r0], #1 -3: T(strb) r2, [r0] +2: TUSER(strb) ip, [r0], #1 +3: TUSER(strb) r2, [r0] #endif #endif /* CONFIG_THUMB2_KERNEL */ mov r0, #0 @@ -60,18 +60,18 @@ ENTRY(__put_user_2) ENDPROC(__put_user_2) ENTRY(__put_user_4) -4: T(str) r2, [r0] +4: TUSER(str) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_4) ENTRY(__put_user_8) #ifdef CONFIG_THUMB2_KERNEL -5: T(str) r2, [r0] -6: T(str) r3, [r0, #4] +5: TUSER(str) r2, [r0] +6: TUSER(str) r3, [r0, #4] #else -5: T(str) r2, [r0], #4 -6: T(str) r3, [r0] +5: TUSER(str) r2, [r0], #4 +6: TUSER(str) r3, [r0] #endif mov r0, #0 mov pc, lr diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S index d0ece2aeb70d..5c908b1cb8ed 100644 --- a/arch/arm/lib/uaccess.S +++ b/arch/arm/lib/uaccess.S @@ -32,11 +32,11 @@ rsb ip, ip, #4 cmp ip, #2 ldrb r3, [r1], #1 -USER( T(strb) r3, [r0], #1) @ May fault +USER( TUSER( strb) r3, [r0], #1) @ May fault ldrgeb r3, [r1], #1 -USER( T(strgeb) r3, [r0], #1) @ May fault +USER( TUSER( strgeb) r3, [r0], #1) @ May fault ldrgtb r3, [r1], #1 -USER( T(strgtb) r3, [r0], #1) @ May fault +USER( TUSER( strgtb) r3, [r0], #1) @ May fault sub r2, r2, ip b .Lc2u_dest_aligned @@ -59,7 +59,7 @@ ENTRY(__copy_to_user) addmi ip, r2, #4 bmi .Lc2u_0nowords ldr r3, [r1], #4 -USER( T(str) r3, [r0], #4) @ May fault +USER( TUSER( str) r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT @@ -88,18 +88,18 @@ USER( T(str) r3, [r0], #4) @ May fault stmneia r0!, {r3 - r4} @ Shouldnt fault tst ip, #4 ldrne r3, [r1], #4 - T(strne) r3, [r0], #4 @ Shouldnt fault + TUSER( strne) r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 beq .Lc2u_0fupi .Lc2u_0nowords: teq ip, #0 beq .Lc2u_finished .Lc2u_nowords: cmp ip, #2 ldrb r3, [r1], #1 -USER( T(strb) r3, [r0], #1) @ May fault +USER( TUSER( strb) r3, [r0], #1) @ May fault ldrgeb r3, [r1], #1 -USER( T(strgeb) r3, [r0], #1) @ May fault +USER( TUSER( strgeb) r3, [r0], #1) @ May fault ldrgtb r3, [r1], #1 -USER( T(strgtb) r3, [r0], #1) @ May fault +USER( TUSER( strgtb) r3, [r0], #1) @ May fault b .Lc2u_finished .Lc2u_not_enough: @@ -120,7 +120,7 @@ USER( T(strgtb) r3, [r0], #1) @ May fault mov r3, r7, pull #8 ldr r7, [r1], #4 orr r3, r3, r7, push #24 -USER( T(str) r3, [r0], #4) @ May fault +USER( TUSER( str) r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT @@ -155,18 +155,18 @@ USER( T(str) r3, [r0], #4) @ May fault movne r3, r7, pull #8 ldrne r7, [r1], #4 orrne r3, r3, r7, push #24 - T(strne) r3, [r0], #4 @ Shouldnt fault + TUSER( strne) r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 beq .Lc2u_1fupi .Lc2u_1nowords: mov r3, r7, get_byte_1 teq ip, #0 beq .Lc2u_finished cmp ip, #2 -USER( T(strb) r3, [r0], #1) @ May fault +USER( TUSER( strb) r3, [r0], #1) @ May fault movge r3, r7, get_byte_2 -USER( T(strgeb) r3, [r0], #1) @ May fault +USER( TUSER( strgeb) r3, [r0], #1) @ May fault movgt r3, r7, get_byte_3 -USER( T(strgtb) r3, [r0], #1) @ May fault +USER( TUSER( strgtb) r3, [r0], #1) @ May fault b .Lc2u_finished .Lc2u_2fupi: subs r2, r2, #4 @@ -175,7 +175,7 @@ USER( T(strgtb) r3, [r0], #1) @ May fault mov r3, r7, pull #16 ldr r7, [r1], #4 orr r3, r3, r7, push #16 -USER( T(str) r3, [r0], #4) @ May fault +USER( TUSER( str) r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT @@ -210,18 +210,18 @@ USER( T(str) r3, [r0], #4) @ May fault movne r3, r7, pull #16 ldrne r7, [r1], #4 orrne r3, r3, r7, push #16 - T(strne) r3, [r0], #4 @ Shouldnt fault + TUSER( strne) r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 beq .Lc2u_2fupi .Lc2u_2nowords: mov r3, r7, get_byte_2 teq ip, #0 beq .Lc2u_finished cmp ip, #2 -USER( T(strb) r3, [r0], #1) @ May fault +USER( TUSER( strb) r3, [r0], #1) @ May fault movge r3, r7, get_byte_3 -USER( T(strgeb) r3, [r0], #1) @ May fault +USER( TUSER( strgeb) r3, [r0], #1) @ May fault ldrgtb r3, [r1], #0 -USER( T(strgtb) r3, [r0], #1) @ May fault +USER( TUSER( strgtb) r3, [r0], #1) @ May fault b .Lc2u_finished .Lc2u_3fupi: subs r2, r2, #4 @@ -230,7 +230,7 @@ USER( T(strgtb) r3, [r0], #1) @ May fault mov r3, r7, pull #24 ldr r7, [r1], #4 orr r3, r3, r7, push #8 -USER( T(str) r3, [r0], #4) @ May fault +USER( TUSER( str) r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT @@ -265,18 +265,18 @@ USER( T(str) r3, [r0], #4) @ May fault movne r3, r7, pull #24 ldrne r7, [r1], #4 orrne r3, r3, r7, push #8 - T(strne) r3, [r0], #4 @ Shouldnt fault + TUSER( strne) r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 beq .Lc2u_3fupi .Lc2u_3nowords: mov r3, r7, get_byte_3 teq ip, #0 beq .Lc2u_finished cmp ip, #2 -USER( T(strb) r3, [r0], #1) @ May fault +USER( TUSER( strb) r3, [r0], #1) @ May fault ldrgeb r3, [r1], #1 -USER( T(strgeb) r3, [r0], #1) @ May fault +USER( TUSER( strgeb) r3, [r0], #1) @ May fault ldrgtb r3, [r1], #0 -USER( T(strgtb) r3, [r0], #1) @ May fault +USER( TUSER( strgtb) r3, [r0], #1) @ May fault b .Lc2u_finished ENDPROC(__copy_to_user) @@ -295,11 +295,11 @@ ENDPROC(__copy_to_user) .Lcfu_dest_not_aligned: rsb ip, ip, #4 cmp ip, #2 -USER( T(ldrb) r3, [r1], #1) @ May fault +USER( TUSER( ldrb) r3, [r1], #1) @ May fault strb r3, [r0], #1 -USER( T(ldrgeb) r3, [r1], #1) @ May fault +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault strgeb r3, [r0], #1 -USER( T(ldrgtb) r3, [r1], #1) @ May fault +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault strgtb r3, [r0], #1 sub r2, r2, ip b .Lcfu_dest_aligned @@ -322,7 +322,7 @@ ENTRY(__copy_from_user) .Lcfu_0fupi: subs r2, r2, #4 addmi ip, r2, #4 bmi .Lcfu_0nowords -USER( T(ldr) r3, [r1], #4) +USER( TUSER( ldr) r3, [r1], #4) str r3, [r0], #4 mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction rsb ip, ip, #0 @@ -351,18 +351,18 @@ USER( T(ldr) r3, [r1], #4) ldmneia r1!, {r3 - r4} @ Shouldnt fault stmneia r0!, {r3 - r4} tst ip, #4 - T(ldrne) r3, [r1], #4 @ Shouldnt fault + TUSER( ldrne) r3, [r1], #4 @ Shouldnt fault strne r3, [r0], #4 ands ip, ip, #3 beq .Lcfu_0fupi .Lcfu_0nowords: teq ip, #0 beq .Lcfu_finished .Lcfu_nowords: cmp ip, #2 -USER( T(ldrb) r3, [r1], #1) @ May fault +USER( TUSER( ldrb) r3, [r1], #1) @ May fault strb r3, [r0], #1 -USER( T(ldrgeb) r3, [r1], #1) @ May fault +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault strgeb r3, [r0], #1 -USER( T(ldrgtb) r3, [r1], #1) @ May fault +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault strgtb r3, [r0], #1 b .Lcfu_finished @@ -375,7 +375,7 @@ USER( T(ldrgtb) r3, [r1], #1) @ May fault .Lcfu_src_not_aligned: bic r1, r1, #3 -USER( T(ldr) r7, [r1], #4) @ May fault +USER( TUSER( ldr) r7, [r1], #4) @ May fault cmp ip, #2 bgt .Lcfu_3fupi beq .Lcfu_2fupi @@ -383,7 +383,7 @@ USER( T(ldr) r7, [r1], #4) @ May fault addmi ip, r2, #4 bmi .Lcfu_1nowords mov r3, r7, pull #8 -USER( T(ldr) r7, [r1], #4) @ May fault +USER( TUSER( ldr) r7, [r1], #4) @ May fault orr r3, r3, r7, push #24 str r3, [r0], #4 mov ip, r1, lsl #32 - PAGE_SHIFT @@ -418,7 +418,7 @@ USER( T(ldr) r7, [r1], #4) @ May fault stmneia r0!, {r3 - r4} tst ip, #4 movne r3, r7, pull #8 -USER( T(ldrne) r7, [r1], #4) @ May fault +USER( TUSER( ldrne) r7, [r1], #4) @ May fault orrne r3, r3, r7, push #24 strne r3, [r0], #4 ands ip, ip, #3 @@ -438,7 +438,7 @@ USER( T(ldrne) r7, [r1], #4) @ May fault addmi ip, r2, #4 bmi .Lcfu_2nowords mov r3, r7, pull #16 -USER( T(ldr) r7, [r1], #4) @ May fault +USER( TUSER( ldr) r7, [r1], #4) @ May fault orr r3, r3, r7, push #16 str r3, [r0], #4 mov ip, r1, lsl #32 - PAGE_SHIFT @@ -474,7 +474,7 @@ USER( T(ldr) r7, [r1], #4) @ May fault stmneia r0!, {r3 - r4} tst ip, #4 movne r3, r7, pull #16 -USER( T(ldrne) r7, [r1], #4) @ May fault +USER( TUSER( ldrne) r7, [r1], #4) @ May fault orrne r3, r3, r7, push #16 strne r3, [r0], #4 ands ip, ip, #3 @@ -486,7 +486,7 @@ USER( T(ldrne) r7, [r1], #4) @ May fault strb r3, [r0], #1 movge r3, r7, get_byte_3 strgeb r3, [r0], #1 -USER( T(ldrgtb) r3, [r1], #0) @ May fault +USER( TUSER( ldrgtb) r3, [r1], #0) @ May fault strgtb r3, [r0], #1 b .Lcfu_finished @@ -494,7 +494,7 @@ USER( T(ldrgtb) r3, [r1], #0) @ May fault addmi ip, r2, #4 bmi .Lcfu_3nowords mov r3, r7, pull #24 -USER( T(ldr) r7, [r1], #4) @ May fault +USER( TUSER( ldr) r7, [r1], #4) @ May fault orr r3, r3, r7, push #8 str r3, [r0], #4 mov ip, r1, lsl #32 - PAGE_SHIFT @@ -529,7 +529,7 @@ USER( T(ldr) r7, [r1], #4) @ May fault stmneia r0!, {r3 - r4} tst ip, #4 movne r3, r7, pull #24 -USER( T(ldrne) r7, [r1], #4) @ May fault +USER( TUSER( ldrne) r7, [r1], #4) @ May fault orrne r3, r3, r7, push #8 strne r3, [r0], #4 ands ip, ip, #3 @@ -539,9 +539,9 @@ USER( T(ldrne) r7, [r1], #4) @ May fault beq .Lcfu_finished cmp ip, #2 strb r3, [r0], #1 -USER( T(ldrgeb) r3, [r1], #1) @ May fault +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault strgeb r3, [r0], #1 -USER( T(ldrgtb) r3, [r1], #1) @ May fault +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault strgtb r3, [r0], #1 b .Lcfu_finished ENDPROC(__copy_from_user) diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 4f991f295284..71feb00a1e99 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -18,6 +18,12 @@ config HAVE_AT91_USART4 config HAVE_AT91_USART5 bool +config AT91_SAM9_ALT_RESET + bool + +config AT91_SAM9G45_RESET + bool + menu "Atmel AT91 System-on-Chip" choice @@ -39,6 +45,7 @@ config ARCH_AT91SAM9260 select HAVE_AT91_USART4 select HAVE_AT91_USART5 select HAVE_NET_MACB + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9261 bool "AT91SAM9261" @@ -46,6 +53,7 @@ config ARCH_AT91SAM9261 select GENERIC_CLOCKEVENTS select HAVE_FB_ATMEL select HAVE_AT91_DBGU0 + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9G10 bool "AT91SAM9G10" @@ -53,6 +61,7 @@ config ARCH_AT91SAM9G10 select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9263 bool "AT91SAM9263" @@ -61,6 +70,7 @@ config ARCH_AT91SAM9263 select HAVE_FB_ATMEL select HAVE_NET_MACB select HAVE_AT91_DBGU1 + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9RL bool "AT91SAM9RL" @@ -69,6 +79,7 @@ config ARCH_AT91SAM9RL select HAVE_AT91_USART3 select HAVE_FB_ATMEL select HAVE_AT91_DBGU0 + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9G20 bool "AT91SAM9G20" @@ -79,6 +90,7 @@ config ARCH_AT91SAM9G20 select HAVE_AT91_USART4 select HAVE_AT91_USART5 select HAVE_NET_MACB + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9G45 bool "AT91SAM9G45" @@ -88,6 +100,7 @@ config ARCH_AT91SAM9G45 select HAVE_FB_ATMEL select HAVE_NET_MACB select HAVE_AT91_DBGU1 + select AT91_SAM9G45_RESET config ARCH_AT91CAP9 bool "AT91CAP9" @@ -96,6 +109,7 @@ config ARCH_AT91CAP9 select HAVE_FB_ATMEL select HAVE_NET_MACB select HAVE_AT91_DBGU1 + select AT91_SAM9G45_RESET config ARCH_AT91X40 bool "AT91x40" diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 242174f9f355..705e1fbded39 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -8,15 +8,17 @@ obj-n := obj- := obj-$(CONFIG_AT91_PMC_UNIT) += clock.o +obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o +obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o # CPU-specific support obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o -obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o +obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index edb879ac04c8..a42edc25a87e 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -21,7 +21,6 @@ #include <mach/cpu.h> #include <mach/at91cap9.h> #include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> #include "soc.h" #include "generic.h" @@ -314,11 +313,6 @@ static struct at91_gpio_bank at91cap9_gpio[] __initdata = { } }; -static void at91cap9_restart(char mode, const char *cmd) -{ - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); -} - /* -------------------------------------------------------------------- * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ @@ -331,13 +325,14 @@ static void __init at91cap9_map_io(void) static void __init at91cap9_ioremap_registers(void) { at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC); + at91_ioremap_rstc(AT91CAP9_BASE_RSTC); at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT); at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC); } static void __init at91cap9_initialize(void) { - arm_pm_restart = at91cap9_restart; + arm_pm_restart = at91sam9g45_restart; at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); /* Register GPIO subsystem */ diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 18bacec2b094..97676bdae998 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 5e46e4a96430..d4036ba43612 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -323,6 +323,7 @@ static void __init at91sam9260_map_io(void) static void __init at91sam9260_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9260_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC); } diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 642ccb6d26b2..5a24f0b4554d 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { @@ -1215,8 +1215,7 @@ void __init at91_add_device_serial(void) {} * CF/IDE * -------------------------------------------------------------------- */ -#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \ - defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ +#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) static struct at91_cf_data cf0_data; @@ -1313,10 +1312,8 @@ void __init at91_add_device_cf(struct at91_cf_data *data) if (data->flags & AT91_CF_TRUE_IDE) #if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) pdev->name = "pata_at91"; -#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) - pdev->name = "at91_ide"; #else -#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91" +#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91" #endif else pdev->name = "at91_cf"; diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index b85b9ea60170..023c2ff138df 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -281,6 +281,7 @@ static void __init at91sam9261_map_io(void) static void __init at91sam9261_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9261_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC); } diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index fc59cbdb0e3c..1e28bed8f425 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 79e3669b1117..75e876c258af 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -301,6 +301,7 @@ static void __init at91sam9263_map_io(void) static void __init at91sam9263_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9263_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0); at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1); diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 7b46b2787022..366a7765635b 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { @@ -355,8 +355,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * Compact Flash (PCMCIA or IDE) * -------------------------------------------------------------------- */ -#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \ - defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) +#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ + defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) static struct at91_cf_data cf0_data; @@ -450,7 +450,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */ at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */ - pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf"; + pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf"; platform_device_register(pdev); } #else diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S index d3f931c5942e..518e42377171 100644 --- a/arch/arm/mach-at91/at91sam9_alt_reset.S +++ b/arch/arm/mach-at91/at91sam9_alt_reset.S @@ -23,7 +23,8 @@ .globl at91sam9_alt_restart at91sam9_alt_restart: ldr r0, .at91_va_base_sdramc @ preload constants - ldr r1, .at91_va_base_rstc_cr + ldr r1, =at91_rstc_base + ldr r1, [r1] mov r2, #1 mov r3, #AT91_SDRAMC_LPCB_POWER_DOWN @@ -33,11 +34,9 @@ at91sam9_alt_restart: ldr r0, .at91_va_base_sdramc @ preload constants str r2, [r0, #AT91_SDRAMC_TR] @ disable SDRAM access str r3, [r0, #AT91_SDRAMC_LPR] @ power down SDRAM - str r4, [r1] @ reset processor + str r4, [r1, #AT91_RSTC_CR] @ reset processor b . .at91_va_base_sdramc: .word AT91_VA_BASE_SYS + AT91_SDRAMC0 -.at91_va_base_rstc_cr: - .word AT91_VA_BASE_SYS + AT91_RSTC_CR diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 7032dd32cdf0..1cb6a96b1c1e 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -18,7 +18,6 @@ #include <asm/mach/map.h> #include <mach/at91sam9g45.h> #include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> #include <mach/cpu.h> #include "soc.h" @@ -318,11 +317,6 @@ static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = { } }; -static void at91sam9g45_restart(char mode, const char *cmd) -{ - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); -} - /* -------------------------------------------------------------------- * AT91SAM9G45 processor initialization * -------------------------------------------------------------------- */ @@ -336,6 +330,7 @@ static void __init at91sam9g45_map_io(void) static void __init at91sam9g45_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9G45_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC); } diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S new file mode 100644 index 000000000000..0468be10980b --- /dev/null +++ b/arch/arm/mach-at91/at91sam9g45_reset.S @@ -0,0 +1,40 @@ +/* + * reset AT91SAM9G45 as per errata + * + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcosoft.com> + * + * unless the SDRAM is cleanly shutdown before we hit the + * reset register it can be left driving the data bus and + * killing the chance of a subsequent boot from NAND + * + * GPLv2 Only + */ + +#include <linux/linkage.h> +#include <mach/hardware.h> +#include <mach/at91sam9_ddrsdr.h> +#include <mach/at91_rstc.h> + + .arm + + .globl at91sam9g45_restart + +at91sam9g45_restart: + ldr r0, .at91_va_base_sdramc0 @ preload constants + ldr r1, =at91_rstc_base + ldr r1, [r1] + + mov r2, #1 + mov r3, #AT91_DDRSDRC_LPCB_POWER_DOWN + ldr r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST + + .balign 32 @ align to cache line + + str r2, [r0, #AT91_DDRSDRC_RTR] @ disable DDR0 access + str r3, [r0, #AT91_DDRSDRC_LPR] @ power down DDR0 + str r4, [r1, #AT91_RSTC_CR] @ reset processor + + b . + +.at91_va_base_sdramc0: + .word AT91_VA_BASE_SYS + AT91_DDRSDRC0 diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index d6bcb1da11df..d2c91a841cb8 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -286,6 +286,7 @@ static void __init at91sam9rl_map_io(void) static void __init at91sam9rl_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9RL_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC); } diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 4866b8180d66..594133451c0c 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -58,7 +58,9 @@ extern void at91_irq_suspend(void); extern void at91_irq_resume(void); /* reset */ +extern void at91_ioremap_rstc(u32 base_addr); extern void at91sam9_alt_restart(char, const char *); +extern void at91sam9g45_restart(char, const char *); /* shutdown */ extern void at91_ioremap_shdwc(u32 base_addr); diff --git a/arch/arm/mach-at91/include/mach/at91_rstc.h b/arch/arm/mach-at91/include/mach/at91_rstc.h index cbd2bf052c1f..875fa336800b 100644 --- a/arch/arm/mach-at91/include/mach/at91_rstc.h +++ b/arch/arm/mach-at91/include/mach/at91_rstc.h @@ -16,13 +16,25 @@ #ifndef AT91_RSTC_H #define AT91_RSTC_H -#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */ +#ifndef __ASSEMBLY__ +extern void __iomem *at91_rstc_base; + +#define at91_rstc_read(field) \ + __raw_readl(at91_rstc_base + field) + +#define at91_rstc_write(field, value) \ + __raw_writel(value, at91_rstc_base + field); +#else +.extern at91_rstc_base +#endif + +#define AT91_RSTC_CR 0x00 /* Reset Controller Control Register */ #define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */ #define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */ #define AT91_RSTC_EXTRST (1 << 3) /* External Reset */ #define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */ -#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */ +#define AT91_RSTC_SR 0x04 /* Reset Controller Status Register */ #define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */ #define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */ #define AT91_RSTC_RSTTYP_GENERAL (0 << 8) @@ -33,7 +45,7 @@ #define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */ #define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */ -#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */ +#define AT91_RSTC_MR 0x08 /* Reset Controller Mode Register */ #define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */ #define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */ #define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */ diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h index 4c0e2f6011d7..61d952902f2b 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -83,7 +83,6 @@ #define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (cpu_is_at91cap9_revB() ? \ (0xfffffd50 - AT91_BASE_SYS) : \ (0xfffffd60 - AT91_BASE_SYS)) @@ -96,6 +95,7 @@ #define AT91CAP9_BASE_PIOB 0xfffff400 #define AT91CAP9_BASE_PIOC 0xfffff600 #define AT91CAP9_BASE_PIOD 0xfffff800 +#define AT91CAP9_BASE_RSTC 0xfffffd00 #define AT91CAP9_BASE_SHDWC 0xfffffd10 #define AT91CAP9_BASE_RTT 0xfffffd20 #define AT91CAP9_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h deleted file mode 100644 index 976f4a6c3353..000000000000 --- a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h +++ /dev/null @@ -1,108 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h - * - * (C) 2008 Andrew Victor - * - * DDR/SDR Controller (DDRSDRC) - System peripherals registers. - * Based on AT91CAP9 datasheet revision B. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91CAP9_DDRSDR_H -#define AT91CAP9_DDRSDR_H - -#define AT91_DDRSDRC_MR 0x00 /* Mode Register */ -#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */ -#define AT91_DDRSDRC_MODE_NORMAL 0 -#define AT91_DDRSDRC_MODE_NOP 1 -#define AT91_DDRSDRC_MODE_PRECHARGE 2 -#define AT91_DDRSDRC_MODE_LMR 3 -#define AT91_DDRSDRC_MODE_REFRESH 4 -#define AT91_DDRSDRC_MODE_EXT_LMR 5 -#define AT91_DDRSDRC_MODE_DEEP 6 - -#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */ -#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ - -#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */ -#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ -#define AT91_DDRSDRC_NC_SDR8 (0 << 0) -#define AT91_DDRSDRC_NC_SDR9 (1 << 0) -#define AT91_DDRSDRC_NC_SDR10 (2 << 0) -#define AT91_DDRSDRC_NC_SDR11 (3 << 0) -#define AT91_DDRSDRC_NC_DDR9 (0 << 0) -#define AT91_DDRSDRC_NC_DDR10 (1 << 0) -#define AT91_DDRSDRC_NC_DDR11 (2 << 0) -#define AT91_DDRSDRC_NC_DDR12 (3 << 0) -#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */ -#define AT91_DDRSDRC_NR_11 (0 << 2) -#define AT91_DDRSDRC_NR_12 (1 << 2) -#define AT91_DDRSDRC_NR_13 (2 << 2) -#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */ -#define AT91_DDRSDRC_CAS_2 (2 << 4) -#define AT91_DDRSDRC_CAS_3 (3 << 4) -#define AT91_DDRSDRC_CAS_25 (6 << 4) -#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */ -#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ - -#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */ -#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ -#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ -#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ -#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */ -#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ -#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ -#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ -#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ - -#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */ -#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ -#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ -#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ -#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ - -#define AT91_DDRSDRC_LPR 0x18 /* Low Power Register */ -#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ -#define AT91_DDRSDRC_LPCB_DISABLE 0 -#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 -#define AT91_DDRSDRC_LPCB_POWER_DOWN 2 -#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3 -#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */ -#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */ -#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ -#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */ -#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ -#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12) -#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) -#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) - -#define AT91_DDRSDRC_MDR 0x1C /* Memory Device Register */ -#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ -#define AT91_DDRSDRC_MD_SDR 0 -#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 -#define AT91_DDRSDRC_MD_DDR 2 -#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 - -#define AT91_DDRSDRC_DLLR 0x20 /* DLL Information Register */ -#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ -#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ -#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ -#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ -#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ -#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ -#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ -#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ -#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ - -/* Register access macros */ -#define at91_ramc_read(num, reg) \ - at91_sys_read(AT91_DDRSDRC##num + reg) -#define at91_ramc_write(num, reg, value) \ - at91_sys_write(AT91_DDRSDRC##num + reg, value) - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index f937c476bb67..fa5ca278adeb 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -83,7 +83,6 @@ #define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) #define AT91SAM9260_BASE_ECC 0xffffe800 @@ -92,6 +91,7 @@ #define AT91SAM9260_BASE_PIOA 0xfffff400 #define AT91SAM9260_BASE_PIOB 0xfffff600 #define AT91SAM9260_BASE_PIOC 0xfffff800 +#define AT91SAM9260_BASE_RSTC 0xfffffd00 #define AT91SAM9260_BASE_SHDWC 0xfffffd10 #define AT91SAM9260_BASE_RTT 0xfffffd20 #define AT91SAM9260_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index 175604e261be..7cde2d36570e 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -68,7 +68,6 @@ #define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) #define AT91SAM9261_BASE_SMC 0xffffec00 @@ -76,6 +75,7 @@ #define AT91SAM9261_BASE_PIOA 0xfffff400 #define AT91SAM9261_BASE_PIOB 0xfffff600 #define AT91SAM9261_BASE_PIOC 0xfffff800 +#define AT91SAM9261_BASE_RSTC 0xfffffd00 #define AT91SAM9261_BASE_SHDWC 0xfffffd10 #define AT91SAM9261_BASE_RTT 0xfffffd20 #define AT91SAM9261_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h index 80c915002d83..5949abda962b 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -78,7 +78,6 @@ #define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) #define AT91SAM9263_BASE_ECC0 0xffffe000 @@ -91,6 +90,7 @@ #define AT91SAM9263_BASE_PIOC 0xfffff600 #define AT91SAM9263_BASE_PIOD 0xfffff800 #define AT91SAM9263_BASE_PIOE 0xfffffa00 +#define AT91SAM9263_BASE_RSTC 0xfffffd00 #define AT91SAM9263_BASE_SHDWC 0xfffffd10 #define AT91SAM9263_BASE_RTT0 0xfffffd20 #define AT91SAM9263_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h index d27b15ba8ebf..e2f8da8ce5bc 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h @@ -46,10 +46,10 @@ #define AT91_DDRSDRC_CAS_25 (6 << 4) #define AT91_DDRSDRC_RST_DLL (1 << 7) /* Reset DLL */ #define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ -#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL */ -#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver */ -#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared */ -#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y */ +#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL [SAM9 Only] */ +#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver [SAM9 Only] */ +#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared [SAM9 Only] */ +#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y [SAM9 Only] */ #define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */ #define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ @@ -59,7 +59,8 @@ #define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ #define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ #define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */ -#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay */ +#define AT91CAP9_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ +#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay [SAM9 Only] */ #define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ #define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */ @@ -68,13 +69,14 @@ #define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ #define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ -#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register */ +#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register [SAM9 Only] */ #define AT91_DDRSDRC_TXARD (0xf << 0) /* Exit active power down delay to read command in mode "Fast Exit" */ #define AT91_DDRSDRC_TXARDS (0xf << 4) /* Exit active power down delay to read command in mode "Slow Exit" */ #define AT91_DDRSDRC_TRPA (0xf << 8) /* Row Precharge All delay */ #define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */ #define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */ +#define AT91CAP9_DDRSDRC_LPR 0x18 /* Low Power Register */ #define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ #define AT91_DDRSDRC_LPCB_DISABLE 0 #define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 @@ -92,32 +94,40 @@ #define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */ #define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */ +#define AT91CAP9_DDRSDRC_MDR 0x1C /* Memory Device Register */ #define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ #define AT91_DDRSDRC_MD_SDR 0 #define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 +#define AT91CAP9_DDRSDRC_MD_DDR 2 #define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 -#define AT91_DDRSDRC_MD_DDR2 6 +#define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */ #define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */ #define AT91_DDRSDRC_DBW_32BITS (0 << 4) #define AT91_DDRSDRC_DBW_16BITS (1 << 4) #define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */ +#define AT91CAP9_DDRSDRC_DLL 0x20 /* DLL Information Register */ #define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ #define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ #define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ +#define AT91CAP9_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ +#define AT91CAP9_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ +#define AT91CAP9_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ #define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ +#define AT91CAP9_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ +#define AT91CAP9_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ -#define AT91_DDRSDRC_HS 0x2C /* High Speed Register */ +#define AT91_DDRSDRC_HS 0x2C /* High Speed Register [SAM9 Only] */ #define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */ #define AT91_DDRSDRC_DELAY(n) (0x30 + (0x4 * (n))) /* Delay I/O Register n */ -#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register */ +#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register [SAM9 Only] */ #define AT91_DDRSDRC_WP (1 << 0) /* Write protect enable */ #define AT91_DDRSDRC_WPKEY (0xffffff << 8) /* Write protect key */ #define AT91_DDRSDRC_KEY (0x444452 << 8) /* Write protect key = "DDR" */ -#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register */ +#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register [SAM9 Only] */ #define AT91_DDRSDRC_WPVS (1 << 0) /* Write protect violation status */ #define AT91_DDRSDRC_WPVSRC (0xffff << 8) /* Write protect violation source */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h index eb18a70fa647..175e1fdd9fe8 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h @@ -18,6 +18,35 @@ #include <mach/cpu.h> +#ifndef __ASSEMBLY__ +struct sam9_smc_config { + /* Setup register */ + u8 ncs_read_setup; + u8 nrd_setup; + u8 ncs_write_setup; + u8 nwe_setup; + + /* Pulse register */ + u8 ncs_read_pulse; + u8 nrd_pulse; + u8 ncs_write_pulse; + u8 nwe_pulse; + + /* Cycle register */ + u16 read_cycle; + u16 write_cycle; + + /* Mode register */ + u32 mode; + u8 tdf_cycles:4; +}; + +extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config); +extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config); +extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config); +extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config); +#endif + #define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */ #define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ #define AT91_SMC_NWESETUP_(x) ((x) << 0) diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index f0c23c960dec..dd9c95ea0862 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -90,7 +90,6 @@ #define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) #define AT91SAM9G45_BASE_ECC 0xffffe200 @@ -102,6 +101,7 @@ #define AT91SAM9G45_BASE_PIOC 0xfffff600 #define AT91SAM9G45_BASE_PIOD 0xfffff800 #define AT91SAM9G45_BASE_PIOE 0xfffffa00 +#define AT91SAM9G45_BASE_RSTC 0xfffffd00 #define AT91SAM9G45_BASE_SHDWC 0xfffffd10 #define AT91SAM9G45_BASE_RTT 0xfffffd20 #define AT91SAM9G45_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index 2bb359e60b97..d7bead7118da 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -72,7 +72,6 @@ #define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) @@ -84,6 +83,7 @@ #define AT91SAM9RL_BASE_PIOB 0xfffff600 #define AT91SAM9RL_BASE_PIOC 0xfffff800 #define AT91SAM9RL_BASE_PIOD 0xfffffa00 +#define AT91SAM9RL_BASE_RSTC 0xfffffd00 #define AT91SAM9RL_BASE_SHDWC 0xfffffd10 #define AT91SAM9RL_BASE_RTT 0xfffffd20 #define AT91SAM9RL_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index d0b377b21bd7..3b33f07b1e11 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -88,7 +88,7 @@ extern void __init at91_add_device_eth(struct macb_platform_data *data); struct at91_usbh_data { u8 ports; /* number of ports on root hub */ int vbus_pin[2]; /* port power-control pin */ - u8 vbus_pin_inverted; + u8 vbus_pin_active_low[2]; u8 overcurrent_supported; int overcurrent_pin[2]; u8 overcurrent_status[2]; diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 62ad95556c36..1606379ac284 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -34,7 +34,6 @@ /* * Show the reason for the previous system reset. */ -#if defined(AT91_RSTC) #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> @@ -58,10 +57,10 @@ static void __init show_reset_status(void) char *reason, *r2 = reset; u32 reset_type, wake_type; - if (!at91_shdwc_base) + if (!at91_shdwc_base || !at91_rstc_base) return; - reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP; + reset_type = at91_rstc_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP; wake_type = at91_shdwc_read(AT91_SHDW_SR); switch (reset_type) { @@ -102,10 +101,6 @@ static void __init show_reset_status(void) } pr_info("AT91: Starting after %s %s\n", reason, r2); } -#else -static void __init show_reset_status(void) {} -#endif - static int at91_pm_valid_state(suspend_state_t state) { diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index ce9a20699111..7eb40d24242f 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -25,21 +25,21 @@ static inline u32 sdram_selfrefresh_enable(void) : : "r" (0)) #elif defined(CONFIG_ARCH_AT91CAP9) -#include <mach/at91cap9_ddrsdr.h> +#include <mach/at91sam9_ddrsdr.h> static inline u32 sdram_selfrefresh_enable(void) { u32 saved_lpr, lpr; - saved_lpr = at91_ramc_read(0, AT91_DDRSDRC_LPR); + saved_lpr = at91_ramc_read(0, AT91CAP9_DDRSDRC_LPR); lpr = saved_lpr & ~AT91_DDRSDRC_LPCB; - at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); + at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); return saved_lpr; } -#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr) +#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, saved_lpr) #define wait_for_interrupt_enable() cpu_do_idle() #elif defined(CONFIG_ARCH_AT91SAM9G45) diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index f7922a436172..92dfb8461392 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -18,9 +18,8 @@ #if defined(CONFIG_ARCH_AT91RM9200) #include <mach/at91rm9200_mc.h> -#elif defined(CONFIG_ARCH_AT91CAP9) -#include <mach/at91cap9_ddrsdr.h> -#elif defined(CONFIG_ARCH_AT91SAM9G45) +#elif defined(CONFIG_ARCH_AT91CAP9) \ + || defined(CONFIG_ARCH_AT91SAM9G45) #include <mach/at91sam9_ddrsdr.h> #else #include <mach/at91sam9_sdramc.h> diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c index 8294783b679d..99a0a1d2b7dc 100644 --- a/arch/arm/mach-at91/sam9_smc.c +++ b/arch/arm/mach-at91/sam9_smc.c @@ -2,6 +2,7 @@ * linux/arch/arm/mach-at91/sam9_smc.c * * Copyright (C) 2008 Andrew Victor + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -22,7 +23,22 @@ static void __iomem *smc_base_addr[2]; -static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config* config) +static void sam9_smc_cs_write_mode(void __iomem *base, + struct sam9_smc_config *config) +{ + __raw_writel(config->mode + | AT91_SMC_TDF_(config->tdf_cycles), + base + AT91_SMC_MODE); +} + +void sam9_smc_write_mode(int id, int cs, + struct sam9_smc_config *config) +{ + sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config); +} + +static void sam9_smc_cs_configure(void __iomem *base, + struct sam9_smc_config *config) { /* Setup register */ @@ -45,16 +61,66 @@ static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_con base + AT91_SMC_CYCLE); /* Mode register */ - __raw_writel(config->mode - | AT91_SMC_TDF_(config->tdf_cycles), - base + AT91_SMC_MODE); + sam9_smc_cs_write_mode(base, config); } -void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config) +void sam9_smc_configure(int id, int cs, + struct sam9_smc_config *config) { sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config); } +static void sam9_smc_cs_read_mode(void __iomem *base, + struct sam9_smc_config *config) +{ + u32 val = __raw_readl(base + AT91_SMC_MODE); + + config->mode = (val & ~AT91_SMC_NWECYCLE); + config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ; +} + +void sam9_smc_read_mode(int id, int cs, + struct sam9_smc_config *config) +{ + sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config); +} + +static void sam9_smc_cs_read(void __iomem *base, + struct sam9_smc_config *config) +{ + u32 val; + + /* Setup register */ + val = __raw_readl(base + AT91_SMC_SETUP); + + config->nwe_setup = val & AT91_SMC_NWESETUP; + config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8; + config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16; + config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24; + + /* Pulse register */ + val = __raw_readl(base + AT91_SMC_PULSE); + + config->nwe_setup = val & AT91_SMC_NWEPULSE; + config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8; + config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16; + config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24; + + /* Cycle register */ + val = __raw_readl(base + AT91_SMC_CYCLE); + + config->write_cycle = val & AT91_SMC_NWECYCLE; + config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16; + + /* Mode register */ + sam9_smc_cs_read_mode(base, config); +} + +void sam9_smc_read(int id, int cs, struct sam9_smc_config *config) +{ + sam9_smc_cs_read(AT91_SMC_CS(id, cs), config); +} + void __init at91sam9_ioremap_smc(int id, u32 addr) { if (id > 1) { diff --git a/arch/arm/mach-at91/sam9_smc.h b/arch/arm/mach-at91/sam9_smc.h index 039c5ce17aec..3e52dcd4a59f 100644 --- a/arch/arm/mach-at91/sam9_smc.h +++ b/arch/arm/mach-at91/sam9_smc.h @@ -8,27 +8,4 @@ * published by the Free Software Foundation. */ -struct sam9_smc_config { - /* Setup register */ - u8 ncs_read_setup; - u8 nrd_setup; - u8 ncs_write_setup; - u8 nwe_setup; - - /* Pulse register */ - u8 ncs_read_pulse; - u8 nrd_pulse; - u8 ncs_write_pulse; - u8 nwe_pulse; - - /* Cycle register */ - u16 read_cycle; - u16 write_cycle; - - /* Mode register */ - u32 mode; - u8 tdf_cycles:4; -}; - -extern void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config); extern void __init at91sam9_ioremap_smc(int id, u32 addr); diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 8bdcc3cb6012..69d3fc4c46f3 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -29,9 +29,12 @@ EXPORT_SYMBOL(at91_soc_initdata); void __init at91rm9200_set_type(int type) { if (type == ARCH_REVISON_9200_PQFP) - at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; - else at91_soc_initdata.subtype = AT91_SOC_RM9200_PQFP; + else + at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; + + pr_info("AT91: filled in soc subtype: %s\n", + at91_get_soc_subtype(&at91_soc_initdata)); } void __init at91_init_irq_default(void) @@ -281,6 +284,15 @@ void __init at91_ioremap_shdwc(u32 base_addr) pm_power_off = at91sam9_poweroff; } +void __iomem *at91_rstc_base; + +void __init at91_ioremap_rstc(u32 base_addr) +{ + at91_rstc_base = ioremap(base_addr, 16); + if (!at91_rstc_base) + panic("Impossible to ioremap at91_rstc_base\n"); +} + void __init at91_initialize(unsigned long main_clock) { at91_boot_soc.ioremap_registers(); diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c index 9e5e7552498c..45c97b1ee9b1 100644 --- a/arch/arm/mach-bcmring/arch.c +++ b/arch/arm/mach-bcmring/arch.c @@ -194,6 +194,6 @@ MACHINE_START(BCMRING, "BCMRING") .init_early = bcmring_init_early, .init_irq = bcmring_init_irq, .timer = &bcmring_timer, - .init_machine = bcmring_init_machine + .init_machine = bcmring_init_machine, .restart = bcmring_restart, MACHINE_END diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c index 1a1a27dd5654..1024396797e1 100644 --- a/arch/arm/mach-bcmring/dma.c +++ b/arch/arm/mach-bcmring/dma.c @@ -33,17 +33,11 @@ #include <mach/timer.h> -#include <linux/mm.h> #include <linux/pfn.h> #include <linux/atomic.h> #include <linux/sched.h> #include <mach/dma.h> -/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */ -/* especially since dc4 doesn't use kmalloc'd memory. */ - -#define ALLOW_MAP_OF_KMALLOC_MEMORY 0 - /* ---- Public Variables ------------------------------------------------- */ /* ---- Private Constants and Types -------------------------------------- */ @@ -53,24 +47,12 @@ #define CONTROLLER_FROM_HANDLE(handle) (((handle) >> 4) & 0x0f) #define CHANNEL_FROM_HANDLE(handle) ((handle) & 0x0f) -#define DMA_MAP_DEBUG 0 - -#if DMA_MAP_DEBUG -# define DMA_MAP_PRINT(fmt, args...) printk("%s: " fmt, __func__, ## args) -#else -# define DMA_MAP_PRINT(fmt, args...) -#endif /* ---- Private Variables ------------------------------------------------ */ static DMA_Global_t gDMA; static struct proc_dir_entry *gDmaDir; -static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0); -static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0); -static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0); -static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0); - #include "dma_device.c" /* ---- Private Function Prototypes -------------------------------------- */ @@ -79,34 +61,6 @@ static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0); /****************************************************************************/ /** -* Displays information for /proc/dma/mem-type -*/ -/****************************************************************************/ - -static int dma_proc_read_mem_type(char *buf, char **start, off_t offset, - int count, int *eof, void *data) -{ - int len = 0; - - len += sprintf(buf + len, "dma_map_mem statistics\n"); - len += - sprintf(buf + len, "coherent: %d\n", - atomic_read(&gDmaStatMemTypeCoherent)); - len += - sprintf(buf + len, "kmalloc: %d\n", - atomic_read(&gDmaStatMemTypeKmalloc)); - len += - sprintf(buf + len, "vmalloc: %d\n", - atomic_read(&gDmaStatMemTypeVmalloc)); - len += - sprintf(buf + len, "user: %d\n", - atomic_read(&gDmaStatMemTypeUser)); - - return len; -} - -/****************************************************************************/ -/** * Displays information for /proc/dma/channels */ /****************************************************************************/ @@ -846,8 +800,6 @@ int dma_init(void) dma_proc_read_channels, NULL); create_proc_read_entry("devices", 0, gDmaDir, dma_proc_read_devices, NULL); - create_proc_read_entry("mem-type", 0, gDmaDir, - dma_proc_read_mem_type, NULL); } out: @@ -1565,767 +1517,3 @@ int dma_set_device_handler(DMA_Device_t dev, /* Device to set the callback for. } EXPORT_SYMBOL(dma_set_device_handler); - -/****************************************************************************/ -/** -* Initializes a memory mapping structure -*/ -/****************************************************************************/ - -int dma_init_mem_map(DMA_MemMap_t *memMap) -{ - memset(memMap, 0, sizeof(*memMap)); - - sema_init(&memMap->lock, 1); - - return 0; -} - -EXPORT_SYMBOL(dma_init_mem_map); - -/****************************************************************************/ -/** -* Releases any memory currently being held by a memory mapping structure. -*/ -/****************************************************************************/ - -int dma_term_mem_map(DMA_MemMap_t *memMap) -{ - down(&memMap->lock); /* Just being paranoid */ - - /* Free up any allocated memory */ - - up(&memMap->lock); - memset(memMap, 0, sizeof(*memMap)); - - return 0; -} - -EXPORT_SYMBOL(dma_term_mem_map); - -/****************************************************************************/ -/** -* Looks at a memory address and categorizes it. -* -* @return One of the values from the DMA_MemType_t enumeration. -*/ -/****************************************************************************/ - -DMA_MemType_t dma_mem_type(void *addr) -{ - unsigned long addrVal = (unsigned long)addr; - - if (addrVal >= CONSISTENT_BASE) { - /* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */ - - /* dma_alloc_xxx pages are physically and virtually contiguous */ - - return DMA_MEM_TYPE_DMA; - } - - /* Technically, we could add one more classification. Addresses between VMALLOC_END */ - /* and the beginning of the DMA virtual address could be considered to be I/O space. */ - /* Right now, nobody cares about this particular classification, so we ignore it. */ - - if (is_vmalloc_addr(addr)) { - /* Address comes from the vmalloc'd region. Pages are virtually */ - /* contiguous but NOT physically contiguous */ - - return DMA_MEM_TYPE_VMALLOC; - } - - if (addrVal >= PAGE_OFFSET) { - /* PAGE_OFFSET is typically 0xC0000000 */ - - /* kmalloc'd pages are physically contiguous */ - - return DMA_MEM_TYPE_KMALLOC; - } - - return DMA_MEM_TYPE_USER; -} - -EXPORT_SYMBOL(dma_mem_type); - -/****************************************************************************/ -/** -* Looks at a memory address and determines if we support DMA'ing to/from -* that type of memory. -* -* @return boolean - -* return value != 0 means dma supported -* return value == 0 means dma not supported -*/ -/****************************************************************************/ - -int dma_mem_supports_dma(void *addr) -{ - DMA_MemType_t memType = dma_mem_type(addr); - - return (memType == DMA_MEM_TYPE_DMA) -#if ALLOW_MAP_OF_KMALLOC_MEMORY - || (memType == DMA_MEM_TYPE_KMALLOC) -#endif - || (memType == DMA_MEM_TYPE_USER); -} - -EXPORT_SYMBOL(dma_mem_supports_dma); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return -*/ -/****************************************************************************/ - -int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */ - enum dma_data_direction dir /* Direction that the mapping will be going */ - ) { - int rc; - - down(&memMap->lock); - - DMA_MAP_PRINT("memMap: %p\n", memMap); - - if (memMap->inUse) { - printk(KERN_ERR "%s: memory map %p is already being used\n", - __func__, memMap); - rc = -EBUSY; - goto out; - } - - memMap->inUse = 1; - memMap->dir = dir; - memMap->numRegionsUsed = 0; - - rc = 0; - -out: - - DMA_MAP_PRINT("returning %d", rc); - - up(&memMap->lock); - - return rc; -} - -EXPORT_SYMBOL(dma_map_start); - -/****************************************************************************/ -/** -* Adds a segment of memory to a memory map. Each segment is both -* physically and virtually contiguous. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -static int dma_map_add_segment(DMA_MemMap_t *memMap, /* Stores state information about the map */ - DMA_Region_t *region, /* Region that the segment belongs to */ - void *virtAddr, /* Virtual address of the segment being added */ - dma_addr_t physAddr, /* Physical address of the segment being added */ - size_t numBytes /* Number of bytes of the segment being added */ - ) { - DMA_Segment_t *segment; - - DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr, - physAddr, numBytes); - - /* Sanity check */ - - if (((unsigned long)virtAddr < (unsigned long)region->virtAddr) - || (((unsigned long)virtAddr + numBytes)) > - ((unsigned long)region->virtAddr + region->numBytes)) { - printk(KERN_ERR - "%s: virtAddr %p is outside region @ %p len: %d\n", - __func__, virtAddr, region->virtAddr, region->numBytes); - return -EINVAL; - } - - if (region->numSegmentsUsed > 0) { - /* Check to see if this segment is physically contiguous with the previous one */ - - segment = ®ion->segment[region->numSegmentsUsed - 1]; - - if ((segment->physAddr + segment->numBytes) == physAddr) { - /* It is - just add on to the end */ - - DMA_MAP_PRINT("appending %d bytes to last segment\n", - numBytes); - - segment->numBytes += numBytes; - - return 0; - } - } - - /* Reallocate to hold more segments, if required. */ - - if (region->numSegmentsUsed >= region->numSegmentsAllocated) { - DMA_Segment_t *newSegment; - size_t oldSize = - region->numSegmentsAllocated * sizeof(*newSegment); - int newAlloc = region->numSegmentsAllocated + 4; - size_t newSize = newAlloc * sizeof(*newSegment); - - newSegment = kmalloc(newSize, GFP_KERNEL); - if (newSegment == NULL) { - return -ENOMEM; - } - memcpy(newSegment, region->segment, oldSize); - memset(&((uint8_t *) newSegment)[oldSize], 0, - newSize - oldSize); - kfree(region->segment); - - region->numSegmentsAllocated = newAlloc; - region->segment = newSegment; - } - - segment = ®ion->segment[region->numSegmentsUsed]; - region->numSegmentsUsed++; - - segment->virtAddr = virtAddr; - segment->physAddr = physAddr; - segment->numBytes = numBytes; - - DMA_MAP_PRINT("returning success\n"); - - return 0; -} - -/****************************************************************************/ -/** -* Adds a region of memory to a memory map. Each region is virtually -* contiguous, but not necessarily physically contiguous. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */ - void *mem, /* Virtual address that we want to get a map of */ - size_t numBytes /* Number of bytes being mapped */ - ) { - unsigned long addr = (unsigned long)mem; - unsigned int offset; - int rc = 0; - DMA_Region_t *region; - dma_addr_t physAddr; - - down(&memMap->lock); - - DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes); - - if (!memMap->inUse) { - printk(KERN_ERR "%s: Make sure you call dma_map_start first\n", - __func__); - rc = -EINVAL; - goto out; - } - - /* Reallocate to hold more regions. */ - - if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) { - DMA_Region_t *newRegion; - size_t oldSize = - memMap->numRegionsAllocated * sizeof(*newRegion); - int newAlloc = memMap->numRegionsAllocated + 4; - size_t newSize = newAlloc * sizeof(*newRegion); - - newRegion = kmalloc(newSize, GFP_KERNEL); - if (newRegion == NULL) { - rc = -ENOMEM; - goto out; - } - memcpy(newRegion, memMap->region, oldSize); - memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize); - - kfree(memMap->region); - - memMap->numRegionsAllocated = newAlloc; - memMap->region = newRegion; - } - - region = &memMap->region[memMap->numRegionsUsed]; - memMap->numRegionsUsed++; - - offset = addr & ~PAGE_MASK; - - region->memType = dma_mem_type(mem); - region->virtAddr = mem; - region->numBytes = numBytes; - region->numSegmentsUsed = 0; - region->numLockedPages = 0; - region->lockedPages = NULL; - - switch (region->memType) { - case DMA_MEM_TYPE_VMALLOC: - { - atomic_inc(&gDmaStatMemTypeVmalloc); - - /* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */ - - /* vmalloc'd pages are not physically contiguous */ - - rc = -EINVAL; - break; - } - - case DMA_MEM_TYPE_KMALLOC: - { - atomic_inc(&gDmaStatMemTypeKmalloc); - - /* kmalloc'd pages are physically contiguous, so they'll have exactly */ - /* one segment */ - -#if ALLOW_MAP_OF_KMALLOC_MEMORY - physAddr = - dma_map_single(NULL, mem, numBytes, memMap->dir); - rc = dma_map_add_segment(memMap, region, mem, physAddr, - numBytes); -#else - rc = -EINVAL; -#endif - break; - } - - case DMA_MEM_TYPE_DMA: - { - /* dma_alloc_xxx pages are physically contiguous */ - - atomic_inc(&gDmaStatMemTypeCoherent); - - physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset; - - dma_sync_single_for_cpu(NULL, physAddr, numBytes, - memMap->dir); - rc = dma_map_add_segment(memMap, region, mem, physAddr, - numBytes); - break; - } - - case DMA_MEM_TYPE_USER: - { - size_t firstPageOffset; - size_t firstPageSize; - struct page **pages; - struct task_struct *userTask; - - atomic_inc(&gDmaStatMemTypeUser); - -#if 1 - /* If the pages are user pages, then the dma_mem_map_set_user_task function */ - /* must have been previously called. */ - - if (memMap->userTask == NULL) { - printk(KERN_ERR - "%s: must call dma_mem_map_set_user_task when using user-mode memory\n", - __func__); - return -EINVAL; - } - - /* User pages need to be locked. */ - - firstPageOffset = - (unsigned long)region->virtAddr & (PAGE_SIZE - 1); - firstPageSize = PAGE_SIZE - firstPageOffset; - - region->numLockedPages = (firstPageOffset - + region->numBytes + - PAGE_SIZE - 1) / PAGE_SIZE; - pages = - kmalloc(region->numLockedPages * - sizeof(struct page *), GFP_KERNEL); - - if (pages == NULL) { - region->numLockedPages = 0; - return -ENOMEM; - } - - userTask = memMap->userTask; - - down_read(&userTask->mm->mmap_sem); - rc = get_user_pages(userTask, /* task */ - userTask->mm, /* mm */ - (unsigned long)region->virtAddr, /* start */ - region->numLockedPages, /* len */ - memMap->dir == DMA_FROM_DEVICE, /* write */ - 0, /* force */ - pages, /* pages (array of pointers to page) */ - NULL); /* vmas */ - up_read(&userTask->mm->mmap_sem); - - if (rc != region->numLockedPages) { - kfree(pages); - region->numLockedPages = 0; - - if (rc >= 0) { - rc = -EINVAL; - } - } else { - uint8_t *virtAddr = region->virtAddr; - size_t bytesRemaining; - int pageIdx; - - rc = 0; /* Since get_user_pages returns +ve number */ - - region->lockedPages = pages; - - /* We've locked the user pages. Now we need to walk them and figure */ - /* out the physical addresses. */ - - /* The first page may be partial */ - - dma_map_add_segment(memMap, - region, - virtAddr, - PFN_PHYS(page_to_pfn - (pages[0])) + - firstPageOffset, - firstPageSize); - - virtAddr += firstPageSize; - bytesRemaining = - region->numBytes - firstPageSize; - - for (pageIdx = 1; - pageIdx < region->numLockedPages; - pageIdx++) { - size_t bytesThisPage = - (bytesRemaining > - PAGE_SIZE ? PAGE_SIZE : - bytesRemaining); - - DMA_MAP_PRINT - ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n", - pageIdx, pages[pageIdx], - page_to_pfn(pages[pageIdx]), - PFN_PHYS(page_to_pfn - (pages[pageIdx]))); - - dma_map_add_segment(memMap, - region, - virtAddr, - PFN_PHYS(page_to_pfn - (pages - [pageIdx])), - bytesThisPage); - - virtAddr += bytesThisPage; - bytesRemaining -= bytesThisPage; - } - } -#else - printk(KERN_ERR - "%s: User mode pages are not yet supported\n", - __func__); - - /* user pages are not physically contiguous */ - - rc = -EINVAL; -#endif - break; - } - - default: - { - printk(KERN_ERR "%s: Unsupported memory type: %d\n", - __func__, region->memType); - - rc = -EINVAL; - break; - } - } - - if (rc != 0) { - memMap->numRegionsUsed--; - } - -out: - - DMA_MAP_PRINT("returning %d\n", rc); - - up(&memMap->lock); - - return rc; -} - -EXPORT_SYMBOL(dma_map_add_segment); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */ - void *mem, /* Virtual address that we want to get a map of */ - size_t numBytes, /* Number of bytes being mapped */ - enum dma_data_direction dir /* Direction that the mapping will be going */ - ) { - int rc; - - rc = dma_map_start(memMap, dir); - if (rc == 0) { - rc = dma_map_add_region(memMap, mem, numBytes); - if (rc < 0) { - /* Since the add fails, this function will fail, and the caller won't */ - /* call unmap, so we need to do it here. */ - - dma_unmap(memMap, 0); - } - } - - return rc; -} - -EXPORT_SYMBOL(dma_map_mem); - -/****************************************************************************/ -/** -* Setup a descriptor ring for a given memory map. -* -* It is assumed that the descriptor ring has already been initialized, and -* this routine will only reallocate a new descriptor ring if the existing -* one is too small. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */ - DMA_MemMap_t *memMap, /* Memory map that will be used */ - dma_addr_t devPhysAddr /* Physical address of device */ - ) { - int rc; - int numDescriptors; - DMA_DeviceAttribute_t *devAttr; - DMA_Region_t *region; - DMA_Segment_t *segment; - dma_addr_t srcPhysAddr; - dma_addr_t dstPhysAddr; - int regionIdx; - int segmentIdx; - - devAttr = &DMA_gDeviceAttribute[dev]; - - down(&memMap->lock); - - /* Figure out how many descriptors we need */ - - numDescriptors = 0; - for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) { - region = &memMap->region[regionIdx]; - - for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed; - segmentIdx++) { - segment = ®ion->segment[segmentIdx]; - - if (memMap->dir == DMA_TO_DEVICE) { - srcPhysAddr = segment->physAddr; - dstPhysAddr = devPhysAddr; - } else { - srcPhysAddr = devPhysAddr; - dstPhysAddr = segment->physAddr; - } - - rc = - dma_calculate_descriptor_count(dev, srcPhysAddr, - dstPhysAddr, - segment-> - numBytes); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_calculate_descriptor_count failed: %d\n", - __func__, rc); - goto out; - } - numDescriptors += rc; - } - } - - /* Adjust the size of the ring, if it isn't big enough */ - - if (numDescriptors > devAttr->ring.descriptorsAllocated) { - dma_free_descriptor_ring(&devAttr->ring); - rc = - dma_alloc_descriptor_ring(&devAttr->ring, - numDescriptors); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_alloc_descriptor_ring failed: %d\n", - __func__, rc); - goto out; - } - } else { - rc = - dma_init_descriptor_ring(&devAttr->ring, - numDescriptors); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_init_descriptor_ring failed: %d\n", - __func__, rc); - goto out; - } - } - - /* Populate the descriptors */ - - for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) { - region = &memMap->region[regionIdx]; - - for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed; - segmentIdx++) { - segment = ®ion->segment[segmentIdx]; - - if (memMap->dir == DMA_TO_DEVICE) { - srcPhysAddr = segment->physAddr; - dstPhysAddr = devPhysAddr; - } else { - srcPhysAddr = devPhysAddr; - dstPhysAddr = segment->physAddr; - } - - rc = - dma_add_descriptors(&devAttr->ring, dev, - srcPhysAddr, dstPhysAddr, - segment->numBytes); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_add_descriptors failed: %d\n", - __func__, rc); - goto out; - } - } - } - - rc = 0; - -out: - - up(&memMap->lock); - return rc; -} - -EXPORT_SYMBOL(dma_map_create_descriptor_ring); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return -*/ -/****************************************************************************/ - -int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ - int dirtied /* non-zero if any of the pages were modified */ - ) { - - int rc = 0; - int regionIdx; - int segmentIdx; - DMA_Region_t *region; - DMA_Segment_t *segment; - - down(&memMap->lock); - - for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) { - region = &memMap->region[regionIdx]; - - for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed; - segmentIdx++) { - segment = ®ion->segment[segmentIdx]; - - switch (region->memType) { - case DMA_MEM_TYPE_VMALLOC: - { - printk(KERN_ERR - "%s: vmalloc'd pages are not yet supported\n", - __func__); - rc = -EINVAL; - goto out; - } - - case DMA_MEM_TYPE_KMALLOC: - { -#if ALLOW_MAP_OF_KMALLOC_MEMORY - dma_unmap_single(NULL, - segment->physAddr, - segment->numBytes, - memMap->dir); -#endif - break; - } - - case DMA_MEM_TYPE_DMA: - { - dma_sync_single_for_cpu(NULL, - segment-> - physAddr, - segment-> - numBytes, - memMap->dir); - break; - } - - case DMA_MEM_TYPE_USER: - { - /* Nothing to do here. */ - - break; - } - - default: - { - printk(KERN_ERR - "%s: Unsupported memory type: %d\n", - __func__, region->memType); - rc = -EINVAL; - goto out; - } - } - - segment->virtAddr = NULL; - segment->physAddr = 0; - segment->numBytes = 0; - } - - if (region->numLockedPages > 0) { - int pageIdx; - - /* Some user pages were locked. We need to go and unlock them now. */ - - for (pageIdx = 0; pageIdx < region->numLockedPages; - pageIdx++) { - struct page *page = - region->lockedPages[pageIdx]; - - if (memMap->dir == DMA_FROM_DEVICE) { - SetPageDirty(page); - } - page_cache_release(page); - } - kfree(region->lockedPages); - region->numLockedPages = 0; - region->lockedPages = NULL; - } - - region->memType = DMA_MEM_TYPE_NONE; - region->virtAddr = NULL; - region->numBytes = 0; - region->numSegmentsUsed = 0; - } - memMap->userTask = NULL; - memMap->numRegionsUsed = 0; - memMap->inUse = 0; - -out: - up(&memMap->lock); - - return rc; -} - -EXPORT_SYMBOL(dma_unmap); diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h index 1f2c5319c056..72543781207b 100644 --- a/arch/arm/mach-bcmring/include/mach/dma.h +++ b/arch/arm/mach-bcmring/include/mach/dma.h @@ -26,15 +26,9 @@ /* ---- Include Files ---------------------------------------------------- */ #include <linux/kernel.h> -#include <linux/wait.h> #include <linux/semaphore.h> #include <csp/dmacHw.h> #include <mach/timer.h> -#include <linux/scatterlist.h> -#include <linux/dma-mapping.h> -#include <linux/mm.h> -#include <linux/vmalloc.h> -#include <linux/pagemap.h> /* ---- Constants and Types ---------------------------------------------- */ @@ -113,78 +107,6 @@ typedef struct { /**************************************************************************** * -* The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup -* DMA chains from a variety of memory sources. -* -*****************************************************************************/ - -#define DMA_MEM_MAP_MIN_SIZE 4096 /* Pages less than this size are better */ - /* off not being DMA'd. */ - -typedef enum { - DMA_MEM_TYPE_NONE, /* Not a valid setting */ - DMA_MEM_TYPE_VMALLOC, /* Memory came from vmalloc call */ - DMA_MEM_TYPE_KMALLOC, /* Memory came from kmalloc call */ - DMA_MEM_TYPE_DMA, /* Memory came from dma_alloc_xxx call */ - DMA_MEM_TYPE_USER, /* Memory came from user space. */ - -} DMA_MemType_t; - -/* A segment represents a physically and virtually contiguous chunk of memory. */ -/* i.e. each segment can be DMA'd */ -/* A user of the DMA code will add memory regions. Each region may need to be */ -/* represented by one or more segments. */ - -typedef struct { - void *virtAddr; /* Virtual address used for this segment */ - dma_addr_t physAddr; /* Physical address this segment maps to */ - size_t numBytes; /* Size of the segment, in bytes */ - -} DMA_Segment_t; - -/* A region represents a virtually contiguous chunk of memory, which may be */ -/* made up of multiple segments. */ - -typedef struct { - DMA_MemType_t memType; - void *virtAddr; - size_t numBytes; - - /* Each region (virtually contiguous) consists of one or more segments. Each */ - /* segment is virtually and physically contiguous. */ - - int numSegmentsUsed; - int numSegmentsAllocated; - DMA_Segment_t *segment; - - /* When a region corresponds to user memory, we need to lock all of the pages */ - /* down before we can figure out the physical addresses. The lockedPage array contains */ - /* the pages that were locked, and which subsequently need to be unlocked once the */ - /* memory is unmapped. */ - - unsigned numLockedPages; - struct page **lockedPages; - -} DMA_Region_t; - -typedef struct { - int inUse; /* Is this mapping currently being used? */ - struct semaphore lock; /* Acquired when using this structure */ - enum dma_data_direction dir; /* Direction this transfer is intended for */ - - /* In the event that we're mapping user memory, we need to know which task */ - /* the memory is for, so that we can obtain the correct mm locks. */ - - struct task_struct *userTask; - - int numRegionsUsed; - int numRegionsAllocated; - DMA_Region_t *region; - -} DMA_MemMap_t; - -/**************************************************************************** -* * The DMA_DeviceAttribute_t contains information which describes a * particular DMA device (or peripheral). * @@ -570,124 +492,6 @@ int dma_alloc_double_dst_descriptors(DMA_Handle_t handle, /* DMA Handle */ /****************************************************************************/ /** -* Initializes a DMA_MemMap_t data structure -*/ -/****************************************************************************/ - -int dma_init_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */ - ); - -/****************************************************************************/ -/** -* Releases any memory currently being held by a memory mapping structure. -*/ -/****************************************************************************/ - -int dma_term_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */ - ); - -/****************************************************************************/ -/** -* Looks at a memory address and categorizes it. -* -* @return One of the values from the DMA_MemType_t enumeration. -*/ -/****************************************************************************/ - -DMA_MemType_t dma_mem_type(void *addr); - -/****************************************************************************/ -/** -* Sets the process (aka userTask) associated with a mem map. This is -* required if user-mode segments will be added to the mapping. -*/ -/****************************************************************************/ - -static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap, - struct task_struct *task) -{ - memMap->userTask = task; -} - -/****************************************************************************/ -/** -* Looks at a memory address and determines if we support DMA'ing to/from -* that type of memory. -* -* @return boolean - -* return value != 0 means dma supported -* return value == 0 means dma not supported -*/ -/****************************************************************************/ - -int dma_mem_supports_dma(void *addr); - -/****************************************************************************/ -/** -* Initializes a memory map for use. Since this function acquires a -* sempaphore within the memory map, it is VERY important that dma_unmap -* be called when you're finished using the map. -*/ -/****************************************************************************/ - -int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */ - enum dma_data_direction dir /* Direction that the mapping will be going */ - ); - -/****************************************************************************/ -/** -* Adds a segment of memory to a memory map. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */ - void *mem, /* Virtual address that we want to get a map of */ - size_t numBytes /* Number of bytes being mapped */ - ); - -/****************************************************************************/ -/** -* Creates a descriptor ring from a memory mapping. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */ - DMA_MemMap_t *memMap, /* Memory map that will be used */ - dma_addr_t devPhysAddr /* Physical address of device */ - ); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return -*/ -/****************************************************************************/ - -int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */ - void *addr, /* Virtual address that we want to get a map of */ - size_t count, /* Number of bytes being mapped */ - enum dma_data_direction dir /* Direction that the mapping will be going */ - ); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return -*/ -/****************************************************************************/ - -int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ - int dirtied /* non-zero if any of the pages were modified */ - ); - -/****************************************************************************/ -/** * Initiates a transfer when the descriptors have already been setup. * * This is a special case, and normally, the dma_transfer_xxx functions should diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 6b22b543a83f..d5088900af6c 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -44,7 +44,7 @@ #include <mach/aemif.h> #include <mach/spi.h> -#define DA850_EVM_PHY_ID "0:00" +#define DA850_EVM_PHY_ID "davinci_mdio-0:00" #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15) diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 346e1de2f5a8..849311d3cb7c 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -54,7 +54,7 @@ static inline int have_tvp7002(void) return 0; } -#define DM365_EVM_PHY_ID "0:01" +#define DM365_EVM_PHY_ID "davinci_mdio-0:01" /* * A MAX-II CPLD is used for various board control functions. */ diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index a64b49cfedca..1247ecdcf752 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -40,7 +40,7 @@ #include <mach/usb.h> #include <mach/aemif.h> -#define DM644X_EVM_PHY_ID "0:01" +#define DM644X_EVM_PHY_ID "davinci_mdio-0:01" #define LXT971_PHY_ID (0x001378e2) #define LXT971_PHY_MASK (0xfffffff0) diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 64017558860b..872ac69fa049 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -736,7 +736,7 @@ static struct davinci_uart_config uart_config __initdata = { .enabled_uarts = (1 << 0), }; -#define DM646X_EVM_PHY_ID "0:01" +#define DM646X_EVM_PHY_ID "davinci_mdio-0:01" /* * The following EDMA channels/slots are not being used by drivers (for * example: Timer, GPIO, UART events etc) on dm646x, hence they are being diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 6c4a16415d47..8d34f513d415 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -39,7 +39,7 @@ #include <mach/mmc.h> #include <mach/usb.h> -#define NEUROS_OSD2_PHY_ID "0:01" +#define NEUROS_OSD2_PHY_ID "davinci_mdio-0:01" #define LXT971_PHY_ID 0x001378e2 #define LXT971_PHY_MASK 0xfffffff0 diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index e7c0c7c53493..45e815760a27 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -21,7 +21,7 @@ #include <mach/da8xx.h> #include <mach/mux.h> -#define HAWKBOARD_PHY_ID "0:07" +#define HAWKBOARD_PHY_ID "davinci_mdio-0:07" #define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12) #define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13) diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 0b136a831c59..31da3c5b2ba3 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -42,7 +42,7 @@ #include <mach/mux.h> #include <mach/usb.h> -#define SFFSDR_PHY_ID "0:01" +#define SFFSDR_PHY_ID "davinci_mdio-0:01" static struct mtd_partition davinci_sffsdr_nandflash_partition[] = { /* U-Boot Environment: Block 0 * UBL: Block 1 diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 0ed7fdb64efb..992c4c410185 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -153,34 +153,6 @@ static struct clk pll1_sysclk3 = { .div_reg = PLLDIV3, }; -static struct clk pll1_sysclk4 = { - .name = "pll1_sysclk4", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV4, -}; - -static struct clk pll1_sysclk5 = { - .name = "pll1_sysclk5", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV5, -}; - -static struct clk pll1_sysclk6 = { - .name = "pll0_sysclk6", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV6, -}; - -static struct clk pll1_sysclk7 = { - .name = "pll1_sysclk7", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV7, -}; - static struct clk i2c0_clk = { .name = "i2c0", .parent = &pll0_aux_clk, @@ -397,10 +369,6 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "pll1_aux", &pll1_aux_clk), CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), - CLK(NULL, "pll1_sysclk4", &pll1_sysclk4), - CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), - CLK(NULL, "pll1_sysclk6", &pll1_sysclk6), - CLK(NULL, "pll1_sysclk7", &pll1_sysclk7), CLK("i2c_davinci.1", NULL, &i2c0_clk), CLK(NULL, "timer0", &timerp64_0_clk), CLK("watchdog", NULL, &timerp64_1_clk), diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index dd1429ae6405..bda7aca04ca0 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -28,6 +28,7 @@ #include <asm/mach/arch.h> #include <linux/irq.h> #include <plat/time.h> +#include <plat/ehci-orion.h> #include <plat/common.h> #include <plat/addr-map.h> #include "common.h" @@ -71,7 +72,7 @@ void __init dove_map_io(void) ****************************************************************************/ void __init dove_ehci0_init(void) { - orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0); + orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0, EHCI_PHY_NA); } /***************************************************************************** diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 03dd4012043e..d5fb44f16d31 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -32,6 +32,7 @@ #include <mach/hardware.h> #include <mach/fb.h> #include <mach/ep93xx_spi.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -153,7 +154,6 @@ static struct i2c_board_info vision_i2c_info[] __initdata = { }, { I2C_BOARD_INFO("pca9539", 0x74), .platform_data = &pca953x_74_gpio_data, - .irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)), }, { I2C_BOARD_INFO("pca9539", 0x75), .platform_data = &pca953x_75_gpio_data, @@ -348,6 +348,8 @@ static void __init vision_init_machine(void) "pca9539:74")) pr_warn("cannot request interrupt gpio for pca9539:74\n"); + vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)); + ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info, ARRAY_SIZE(vision_i2c_info)); ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c index a5823a7f249e..13312ccb2d93 100644 --- a/arch/arm/mach-exynos/clock-exynos4210.c +++ b/arch/arm/mach-exynos/clock-exynos4210.c @@ -32,6 +32,7 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4210_clock_save[] = { SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKSRC_LCD1), @@ -42,6 +43,7 @@ static struct sleep_save exynos4210_clock_save[] = { SAVE_ITEM(S5P_CLKGATE_IP_LCD1), SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210), }; +#endif static struct clksrc_clk *sysclks[] = { /* nothing here yet */ diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c index 26a668b0d101..48af28566fa1 100644 --- a/arch/arm/mach-exynos/clock-exynos4212.c +++ b/arch/arm/mach-exynos/clock-exynos4212.c @@ -32,12 +32,14 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4212_clock_save[] = { SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKDIV_IMAGE), SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212), SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212), }; +#endif static struct clk *clk_src_mpll_user_list[] = { [0] = &clk_fin_mpll, diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c index 5a8c42e90005..187287aa57ab 100644 --- a/arch/arm/mach-exynos/clock.c +++ b/arch/arm/mach-exynos/clock.c @@ -30,6 +30,7 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4_clock_save[] = { SAVE_ITEM(S5P_CLKDIV_LEFTBUS), SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), @@ -93,6 +94,7 @@ static struct sleep_save exynos4_clock_save[] = { SAVE_ITEM(S5P_CLKGATE_SCLKCPU), SAVE_ITEM(S5P_CLKGATE_IP_CPU), }; +#endif struct clk clk_sclk_hdmi27m = { .name = "sclk_hdmi27m", diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index da70e7e39937..dd1ad55524c9 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -16,6 +16,7 @@ #include <linux/io.h> #include <asm/cacheflush.h> +#include <asm/smp_plat.h> #include <mach/regs-pmu.h> diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index 85fa02767d67..e6b02fdf1b09 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -15,11 +15,13 @@ #include <linux/serial_core.h> #include <asm/mach/arch.h> +#include <asm/hardware/gic.h> #include <mach/map.h> #include <plat/cpu.h> #include <plat/regs-serial.h> -#include <plat/exynos4.h> + +#include "common.h" /* * The following lookup table is used to override device names when devices @@ -60,7 +62,7 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = { static void __init exynos4210_dt_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); } @@ -79,7 +81,9 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ .init_irq = exynos4_init_irq, .map_io = exynos4210_dt_map_io, + .handle_irq = gic_handle_irq, .init_machine = exynos4210_dt_machine_init, .timer = &exynos4_timer, .dt_compat = exynos4210_dt_compat, + .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index b895ec031105..435261f83f46 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -220,14 +220,14 @@ static struct s3c_fb_pd_win nuri_fb_win0 = { .lower_margin = 1, .hsync_len = 48, .vsync_len = 3, - .xres = 1280, - .yres = 800, + .xres = 1024, + .yres = 600, .refresh = 60, }, .max_bpp = 24, .default_bpp = 16, - .virtual_x = 1280, - .virtual_y = 800, + .virtual_x = 1024, + .virtual_y = 2 * 600, }; static struct s3c_fb_platdata nuri_fb_pdata __initdata = { diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 37ac93e8d6d9..0fc65ffde8ff 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -910,7 +910,7 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = { .bus_type = FIMC_MIPI_CSI2, .board_info = &m5mols_board_info, .i2c_bus_num = 0, - .clk_frequency = 21600000UL, + .clk_frequency = 24000000UL, .csi_data_align = 32, }, }; diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 683aec786b78..0f2035a1eb6e 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -23,6 +23,7 @@ #include <asm/cacheflush.h> #include <asm/hardware/gic.h> +#include <asm/smp_plat.h> #include <asm/smp_scu.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index a4f61a43c7ba..e19013051772 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -206,7 +206,7 @@ static void exynos4_pm_prepare(void) } -static int exynos4_pm_add(struct device *dev) +static int exynos4_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = exynos4_pm_prepare; pm_cpu_sleep = exynos4_cpu_suspend; @@ -384,7 +384,9 @@ static void exynos4_pm_resume(void) exynos4_restore_pll(); +#ifdef CONFIG_SMP scu_enable(S5P_VA_SCU); +#endif #ifdef CONFIG_CACHE_L2X0 s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 7afbe1e55beb..8394d512a402 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -25,6 +25,7 @@ #include <linux/smp.h> #include <asm/cacheflush.h> +#include <asm/smp_plat.h> #include <asm/smp_scu.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/timer-sp.h> @@ -72,9 +73,7 @@ static void __init highbank_map_io(void) void highbank_set_cpu_jump(int cpu, void *jump_addr) { -#ifdef CONFIG_SMP cpu = cpu_logical_map(cpu); -#endif writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu)); __cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16); outer_clean_range(HB_JUMP_TABLE_PHYS(cpu), diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 0e6de366c648..4defb97bbfc8 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -22,6 +22,18 @@ config ARCH_MX25 config MACH_MX27 bool +config ARCH_MX5 + bool + +config ARCH_MX50 + bool + +config ARCH_MX51 + bool + +config ARCH_MX53 + bool + config SOC_IMX1 bool select ARCH_MX1 @@ -73,6 +85,31 @@ config SOC_IMX35 select MXC_AVIC select SMP_ON_UP if SMP +config SOC_IMX5 + select CPU_V7 + select MXC_TZIC + select ARCH_MXC_IOMUX_V3 + select ARCH_MXC_AUDMUX_V2 + select ARCH_HAS_CPUFREQ + select ARCH_MX5 + bool + +config SOC_IMX50 + bool + select SOC_IMX5 + select ARCH_MX50 + +config SOC_IMX51 + bool + select SOC_IMX5 + select ARCH_MX5 + select ARCH_MX51 + +config SOC_IMX53 + bool + select SOC_IMX5 + select ARCH_MX5 + select ARCH_MX53 if ARCH_IMX_V4_V5 @@ -592,6 +629,207 @@ config MACH_VPR200 Include support for VPR200 platform. This includes specific configurations for the board and its peripherals. +comment "i.MX5 platforms:" + +config MACH_MX50_RDP + bool "Support MX50 reference design platform" + depends on BROKEN + select SOC_IMX50 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for MX50 reference design platform (RDP) board. This + includes specific configurations for the board and its peripherals. + +comment "i.MX51 machines:" + +config MACH_IMX51_DT + bool "Support i.MX51 platforms from device tree" + select SOC_IMX51 + select USE_OF + select MACH_MX51_BABBAGE + help + Include support for Freescale i.MX51 based platforms + using the device tree for discovery + +config MACH_MX51_BABBAGE + bool "Support MX51 BABBAGE platforms" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for MX51 Babbage platform, also known as MX51EVK in + u-boot. This includes specific configurations for the board and its + peripherals. + +config MACH_MX51_3DS + bool "Support MX51PDK (3DS)" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_DEBUG_BOARD + help + Include support for MX51PDK (3DS) platform. This includes specific + configurations for the board and its peripherals. + +config MACH_EUKREA_CPUIMX51 + bool "Support Eukrea CPUIMX51 module" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for Eukrea CPUIMX51 platform. This includes + specific configurations for the module and its peripherals. + +choice + prompt "Baseboard" + depends on MACH_EUKREA_CPUIMX51 + default MACH_EUKREA_MBIMX51_BASEBOARD + +config MACH_EUKREA_MBIMX51_BASEBOARD + prompt "Eukrea MBIMX51 development board" + bool + select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select LEDS_GPIO_REGISTER + help + This adds board specific devices that can be found on Eukrea's + MBIMX51 evaluation board. + +endchoice + +config MACH_EUKREA_CPUIMX51SD + bool "Support Eukrea CPUIMX51SD module" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for Eukrea CPUIMX51SD platform. This includes + specific configurations for the module and its peripherals. + +choice + prompt "Baseboard" + depends on MACH_EUKREA_CPUIMX51SD + default MACH_EUKREA_MBIMXSD51_BASEBOARD + +config MACH_EUKREA_MBIMXSD51_BASEBOARD + prompt "Eukrea MBIMXSD development board" + bool + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select LEDS_GPIO_REGISTER + help + This adds board specific devices that can be found on Eukrea's + MBIMXSD evaluation board. + +endchoice + +config MX51_EFIKA_COMMON + bool + select SOC_IMX51 + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_PATA_IMX + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_ULPI if USB_ULPI + +config MACH_MX51_EFIKAMX + bool "Support MX51 Genesi Efika MX nettop" + select LEDS_GPIO_REGISTER + select MX51_EFIKA_COMMON + help + Include support for Genesi Efika MX nettop. This includes specific + configurations for the board and its peripherals. + +config MACH_MX51_EFIKASB + bool "Support MX51 Genesi Efika Smartbook" + select LEDS_GPIO_REGISTER + select MX51_EFIKA_COMMON + help + Include support for Genesi Efika Smartbook. This includes specific + configurations for the board and its peripherals. + +comment "i.MX53 machines:" + +config MACH_IMX53_DT + bool "Support i.MX53 platforms from device tree" + select SOC_IMX53 + select USE_OF + select MACH_MX53_ARD + select MACH_MX53_EVK + select MACH_MX53_LOCO + select MACH_MX53_SMD + help + Include support for Freescale i.MX53 based platforms + using the device tree for discovery + +config MACH_MX53_EVK + bool "Support MX53 EVK platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + select LEDS_GPIO_REGISTER + help + Include support for MX53 EVK platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX53_SMD + bool "Support MX53 SMD platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + help + Include support for MX53 SMD platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX53_LOCO + bool "Support MX53 LOCO platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_GPIO_KEYS + select LEDS_GPIO_REGISTER + help + Include support for MX53 LOCO platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX53_ARD + bool "Support MX53 ARD platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_GPIO_KEYS + help + Include support for MX53 ARD platform. This includes specific + configurations for the board and its peripherals. + comment "i.MX6 family:" config SOC_IMX6Q diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index f5920c24f7d7..55db9c488f2b 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -11,6 +11,8 @@ obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o + # Support for CMOS sensor interface obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o @@ -75,3 +77,22 @@ obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o ifeq ($(CONFIG_PM),y) obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o endif + +# i.MX5 based machines +obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o +obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o +obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o +obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o +obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o +obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += mach-cpuimx51.o +obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o +obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o +obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o +obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o +obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o +obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o + +obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o +obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index 5f4d06af4912..6dfdbcc83afd 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -22,6 +22,18 @@ zreladdr-$(CONFIG_SOC_IMX35) += 0x80008000 params_phys-$(CONFIG_SOC_IMX35) := 0x80000100 initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000 +zreladdr-$(CONFIG_SOC_IMX50) += 0x70008000 +params_phys-$(CONFIG_SOC_IMX50) := 0x70000100 +initrd_phys-$(CONFIG_SOC_IMX50) := 0x70800000 + +zreladdr-$(CONFIG_SOC_IMX51) += 0x90008000 +params_phys-$(CONFIG_SOC_IMX51) := 0x90000100 +initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000 + +zreladdr-$(CONFIG_SOC_IMX53) += 0x70008000 +params_phys-$(CONFIG_SOC_IMX53) := 0x70000100 +initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000 + zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000 params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100 initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000 diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c index 9273c2a24b54..2d88f8b9a454 100644 --- a/arch/arm/mach-imx/clock-imx6q.c +++ b/arch/arm/mach-imx/clock-imx6q.c @@ -814,6 +814,16 @@ DEF_PFD(pll3_pfd_540m, PFD_480, PFD1, &pll3_usb_otg); DEF_PFD(pll3_pfd_508m, PFD_480, PFD2, &pll3_usb_otg); DEF_PFD(pll3_pfd_454m, PFD_480, PFD3, &pll3_usb_otg); +static unsigned long twd_clk_get_rate(struct clk *clk) +{ + return clk_get_rate(clk->parent) / 2; +} + +static struct clk twd_clk = { + .parent = &arm_clk, + .get_rate = twd_clk_get_rate, +}; + static unsigned long pll2_200m_get_rate(struct clk *clk) { return clk_get_rate(clk->parent) / 2; @@ -1894,6 +1904,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("20ec000.sdma", NULL, sdma_clk), _REGISTER_CLOCK("20bc000.wdog", NULL, dummy_clk), _REGISTER_CLOCK("20c0000.wdog", NULL, dummy_clk), + _REGISTER_CLOCK("smp_twd", NULL, twd_clk), _REGISTER_CLOCK(NULL, "ckih", ckih_clk), _REGISTER_CLOCK(NULL, "ckil_clk", ckil_clk), _REGISTER_CLOCK(NULL, "aips_tz1_clk", aips_tz1_clk), diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-imx/clock-mx51-mx53.c index 4cb276977190..08470504a088 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-imx/clock-mx51-mx53.c @@ -23,7 +23,7 @@ #include <mach/common.h> #include <mach/clock.h> -#include "crm_regs.h" +#include "crm-regs-imx5.h" /* External clock values passed-in by the board code */ static unsigned long external_high_reference, external_low_reference; diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-imx/cpu-imx5.c index 5e2e7a843860..5e2e7a843860 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-imx/cpu-imx5.c diff --git a/arch/arm/mach-mx5/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c index 9d34c3d4c024..9d34c3d4c024 100644 --- a/arch/arm/mach-mx5/cpu_op-mx51.c +++ b/arch/arm/mach-imx/cpu_op-mx51.c diff --git a/arch/arm/mach-mx5/cpu_op-mx51.h b/arch/arm/mach-imx/cpu_op-mx51.h index 97477fecb469..97477fecb469 100644 --- a/arch/arm/mach-mx5/cpu_op-mx51.h +++ b/arch/arm/mach-imx/cpu_op-mx51.h diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-imx/crm-regs-imx5.h index 5e11ba7daee2..5e11ba7daee2 100644 --- a/arch/arm/mach-mx5/crm_regs.h +++ b/arch/arm/mach-imx/crm-regs-imx5.h diff --git a/arch/arm/mach-mx5/devices-imx50.h b/arch/arm/mach-imx/devices-imx50.h index 7216667eaafc..7216667eaafc 100644 --- a/arch/arm/mach-mx5/devices-imx50.h +++ b/arch/arm/mach-imx/devices-imx50.h diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h index af488bc0e225..af488bc0e225 100644 --- a/arch/arm/mach-mx5/devices-imx51.h +++ b/arch/arm/mach-imx/devices-imx51.h diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h index 6e1e5d1f8c3a..6e1e5d1f8c3a 100644 --- a/arch/arm/mach-mx5/devices-imx53.h +++ b/arch/arm/mach-imx/devices-imx53.h diff --git a/arch/arm/mach-mx5/efika.h b/arch/arm/mach-imx/efika.h index 014aa985faae..014aa985faae 100644 --- a/arch/arm/mach-mx5/efika.h +++ b/arch/arm/mach-imx/efika.h diff --git a/arch/arm/mach-mx5/ehci.c b/arch/arm/mach-imx/ehci-imx5.c index c17fa131728b..c17fa131728b 100644 --- a/arch/arm/mach-mx5/ehci.c +++ b/arch/arm/mach-imx/ehci-imx5.c diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c index a6a3ab8f1b1c..a6a3ab8f1b1c 100644 --- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c index d817fc80b986..d817fc80b986 100644 --- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index e6bad17b908c..e6bad17b908c 100644 --- a/arch/arm/mach-mx5/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c index 05ebb3e68679..05ebb3e68679 100644 --- a/arch/arm/mach-mx5/imx53-dt.c +++ b/arch/arm/mach-imx/imx53-dt.c diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-imx/mach-cpuimx51.c index 944025da8333..944025da8333 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-imx/mach-cpuimx51.c diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index 9fbe923c8b08..9fbe923c8b08 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-imx/mach-mx50_rdp.c index 42b66e8d9615..42b66e8d9615 100644 --- a/arch/arm/mach-mx5/board-mx50_rdp.c +++ b/arch/arm/mach-imx/mach-mx50_rdp.c diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c index 83eab4176ca4..83eab4176ca4 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-imx/mach-mx51_3ds.c diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c index e4b822e9f719..e4b822e9f719 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-imx/mach-mx51_babbage.c diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c index 3a5ed2dd885a..3a5ed2dd885a 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-imx/mach-mx51_efikamx.c diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c index ea5f65b0381a..ea5f65b0381a 100644 --- a/arch/arm/mach-mx5/board-mx51_efikasb.c +++ b/arch/arm/mach-imx/mach-mx51_efikasb.c diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c index 5f224f1c3eb6..753f4fc9ec04 100644 --- a/arch/arm/mach-mx5/board-mx53_ard.c +++ b/arch/arm/mach-imx/mach-mx53_ard.c @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include "crm_regs.h" #include "devices-imx53.h" #define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31) @@ -189,8 +188,10 @@ static int weim_cs_config(void) return -ENOMEM; iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K); - if (!iomuxc_base) + if (!iomuxc_base) { + iounmap(weim_base); return -ENOMEM; + } /* CS1 timings for LAN9220 */ writel(0x20001, (weim_base + 0x18)); diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c index d6ce137896d6..5a72188b9cdb 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-imx/mach-mx53_evk.c @@ -37,7 +37,6 @@ #define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19) #define MX53EVK_LED IMX_GPIO_NR(7, 7) -#include "crm_regs.h" #include "devices-imx53.h" static iomux_v3_cfg_t mx53_evk_pads[] = { diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c index fd8b524e1c58..37f67cac15a4 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-imx/mach-mx53_loco.c @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include "crm_regs.h" #include "devices-imx53.h" #define MX53_LOCO_POWER IMX_GPIO_NR(1, 8) diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c index 22c53c9b18aa..8e972c5c3e13 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-imx/mach-mx53_smd.c @@ -31,7 +31,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include "crm_regs.h" #include "devices-imx53.h" #define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6) diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-imx/mm-imx5.c index bc17dfea3817..bc17dfea3817 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-imx/mm-imx5.c diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c index ec6ca91b299b..ec6ca91b299b 100644 --- a/arch/arm/mach-mx5/mx51_efika.c +++ b/arch/arm/mach-imx/mx51_efika.c diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-imx/pm-imx5.c index 5eebfaad1226..6dc093448057 100644 --- a/arch/arm/mach-mx5/system.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -1,8 +1,6 @@ /* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: @@ -10,14 +8,22 @@ * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ -#include <linux/platform_device.h> +#include <linux/suspend.h> +#include <linux/clk.h> #include <linux/io.h> -#include <mach/hardware.h> +#include <linux/err.h> +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> #include <mach/common.h> -#include "crm_regs.h" +#include <mach/hardware.h> +#include "crm-regs-imx5.h" + +static struct clk *gpc_dvfs_clk; -/* set cpu low power mode before WFI instruction. This function is called - * mx5 because it can be used for mx50, mx51, and mx53.*/ +/* + * set cpu low power mode before WFI instruction. This function is called + * mx5 because it can be used for mx50, mx51, and mx53. + */ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) { u32 plat_lpc, arm_srpgcr, ccm_clpcr; @@ -80,3 +86,68 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) __raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR); } } + +static int mx5_suspend_prepare(void) +{ + return clk_enable(gpc_dvfs_clk); +} + +static int mx5_suspend_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + mx5_cpu_lp_set(STOP_POWER_OFF); + break; + case PM_SUSPEND_STANDBY: + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + break; + default: + return -EINVAL; + } + + if (state == PM_SUSPEND_MEM) { + local_flush_tlb_all(); + flush_cache_all(); + + /*clear the EMPGC0/1 bits */ + __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR); + __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR); + } + cpu_do_idle(); + return 0; +} + +static void mx5_suspend_finish(void) +{ + clk_disable(gpc_dvfs_clk); +} + +static int mx5_pm_valid(suspend_state_t state) +{ + return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX); +} + +static const struct platform_suspend_ops mx5_suspend_ops = { + .valid = mx5_pm_valid, + .prepare = mx5_suspend_prepare, + .enter = mx5_suspend_enter, + .finish = mx5_suspend_finish, +}; + +static int __init mx5_pm_init(void) +{ + if (!cpu_is_mx51() && !cpu_is_mx53()) + return 0; + + if (gpc_dvfs_clk == NULL) + gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); + + if (!IS_ERR(gpc_dvfs_clk)) { + if (cpu_is_mx51()) + suspend_set_ops(&mx5_suspend_ops); + } else + return -EPERM; + + return 0; +} +device_initcall(mx5_pm_init); diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 29bd1243781e..e15f1555c59b 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -15,6 +15,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/smp.h> +#include <asm/smp_plat.h> #define SRC_SCR 0x000 #define SRC_GPR1 0x020 @@ -24,10 +25,6 @@ static void __iomem *src_base; -#ifndef CONFIG_SMP -#define cpu_logical_map(cpu) 0 -#endif - void imx_enable_cpu(int cpu, bool enable) { u32 mask, val; diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index cc15426787b1..77d4852e19f2 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -27,6 +27,7 @@ #include <plat/cache-feroceon-l2.h> #include <plat/mvsdio.h> #include <plat/orion_nand.h> +#include <plat/ehci-orion.h> #include <plat/common.h> #include <plat/time.h> #include <plat/addr-map.h> @@ -73,7 +74,7 @@ unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED; void __init kirkwood_ehci_init(void) { kirkwood_clk_ctrl |= CGC_USB0; - orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB); + orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA); } diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h index e8fda45c0736..d5a0d1da2e0e 100644 --- a/arch/arm/mach-kirkwood/mpp.h +++ b/arch/arm/mach-kirkwood/mpp.h @@ -31,314 +31,314 @@ #define MPP_F6282_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 0, 1 ) #define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP0_NF_IO2 MPP( 0, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP0_NF_IO2 MPP( 0, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP1_NF_IO3 MPP( 1, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP1_NF_IO3 MPP( 1, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP2_NF_IO4 MPP( 2, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP2_NF_IO4 MPP( 2, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP3_NF_IO5 MPP( 3, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP3_SPI_MISO MPP( 3, 0x2, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP3_NF_IO5 MPP( 3, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP3_SPI_MISO MPP( 3, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP4_NF_IO6 MPP( 4, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP4_UART0_RXD MPP( 4, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP4_NF_IO6 MPP( 4, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP4_UART0_RXD MPP( 4, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 0, 0, 0, 1, 1, 1 ) #define MPP4_LCD_VGA_HSYNC MPP( 4, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP4_PTP_CLK MPP( 4, 0xd, 1, 0, 1, 1, 1, 1, 0 ) +#define MPP4_PTP_CLK MPP( 4, 0xd, 0, 0, 1, 1, 1, 1, 0 ) #define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP5_NF_IO7 MPP( 5, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP5_NF_IO7 MPP( 5, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP5_LCD_VGA_VSYNC MPP( 5, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 1, 1, 1, 1, 1, 0 ) +#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 0, 1, 1, 1, 1, 0 ) #define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP8_TW0_SDA MPP( 8, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP8_MII0_RXERR MPP( 8, 0x4, 1, 0, 0, 1, 1, 1, 1 ) -#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP8_PTP_CLK MPP( 8, 0xc, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP8_MII0_COL MPP( 8, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP8_TW0_SDA MPP( 8, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP8_MII0_RXERR MPP( 8, 0x4, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP8_PTP_CLK MPP( 8, 0xc, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP8_MII0_COL MPP( 8, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP9_TW0_SCK MPP( 9, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP9_UART0_CTS MPP( 9, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP9_UART1_CTS MPP( 9, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP9_MII0_CRS MPP( 9, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP9_TW0_SCK MPP( 9, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP9_UART0_CTS MPP( 9, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP9_UART1_CTS MPP( 9, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP9_MII0_CRS MPP( 9, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 1, 1, 1, 1, 1, 0 ) +#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 0, 1, 1, 1, 1, 0 ) #define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP11_SPI_MISO MPP( 11, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP11_UART0_RXD MPP( 11, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP11_PTP_CLK MPP( 11, 0xd, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP11_SPI_MISO MPP( 11, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP11_UART0_RXD MPP( 11, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP11_PTP_CLK MPP( 11, 0xd, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 ) #define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 ) -#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP12_TW1_SDA MPP( 12, 0xd, 1, 0, 0, 0, 0, 0, 1 ) +#define MPP12_SD_CLK MPP( 12, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP12_TW1_SDA MPP( 12, 0xd, 0, 0, 0, 0, 0, 0, 1 ) #define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP13_SD_CMD MPP( 13, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP13_LCDPWM MPP( 13, 0xb, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP13_SD_CMD MPP( 13, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP13_LCDPWM MPP( 13, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP14_SD_D0 MPP( 14, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP14_UART1_RXD MPP( 14, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP14_AU_SPDIFI MPP( 14, 0xa, 1, 0, 0, 0, 0, 0, 1 ) -#define MPP14_AU_I2SDI MPP( 14, 0xb, 1, 0, 0, 0, 0, 0, 1 ) -#define MPP14_MII0_COL MPP( 14, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP14_SD_D0 MPP( 14, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP14_UART1_RXD MPP( 14, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP14_AU_SPDIFI MPP( 14, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP14_AU_I2SDI MPP( 14, 0xb, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP14_MII0_COL MPP( 14, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP15_SD_D1 MPP( 15, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP15_SD_D1 MPP( 15, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP16_SD_D2 MPP( 16, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP16_UART0_CTS MPP( 16, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP16_UART1_RXD MPP( 16, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 1, 0, 0, 0, 0, 0, 1 ) -#define MPP16_MII0_CRS MPP( 16, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP16_SD_D2 MPP( 16, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP16_UART0_CTS MPP( 16, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP16_UART1_RXD MPP( 16, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP16_MII0_CRS MPP( 16, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP17_SD_D3 MPP( 17, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP17_TW1_SCK MPP( 17, 0xd, 1, 1, 0, 0, 0, 0, 1 ) +#define MPP17_SD_D3 MPP( 17, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP17_TW1_SCK MPP( 17, 0xd, 0, 0, 0, 0, 0, 0, 1 ) #define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP18_NF_IO0 MPP( 18, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP18_NF_IO0 MPP( 18, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 0, 0, 0, 0, 0, 1 ) #define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP19_NF_IO1 MPP( 19, 0x1, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP19_NF_IO1 MPP( 19, 0x1, 0, 0, 1, 1, 1, 1, 1 ) #define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP20_TSMP0 MPP( 20, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP20_TSMP0 MPP( 20, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP20_GE1_TXD0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP20_AU_SPDIFI MPP( 20, 0x4, 1, 0, 0, 0, 1, 1, 1 ) -#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP20_AU_SPDIFI MPP( 20, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 0, 0, 0, 1, 1, 1 ) #define MPP20_LCD_D0 MPP( 20, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP21_TSMP1 MPP( 21, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP21_TSMP1 MPP( 21, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP21_GE1_TXD1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP21_LCD_D1 MPP( 21, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP22_TSMP2 MPP( 22, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP22_TSMP2 MPP( 22, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP22_GE1_TXD2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 0, 0, 0, 1, 1, 1 ) #define MPP22_LCD_D2 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP23_TSMP3 MPP( 23, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP23_TSMP3 MPP( 23, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP23_GE1_TXD3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP23_LCD_D3 MPP( 23, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP24_TSMP4 MPP( 24, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP24_TSMP4 MPP( 24, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP24_GE1_RXD0 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP24_LCD_D4 MPP( 24, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP25_TSMP5 MPP( 25, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP25_TSMP5 MPP( 25, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP25_GE1_RXD1 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP25_LCD_D5 MPP( 25, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP26_TSMP6 MPP( 26, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP26_TSMP6 MPP( 26, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP26_GE1_RXD2 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP26_LCD_D6 MPP( 26, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP27_TSMP7 MPP( 27, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP27_TSMP7 MPP( 27, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP27_GE1_RXD3 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP27_AU_I2SDI MPP( 27, 0x4, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP27_AU_I2SDI MPP( 27, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP27_LCD_D7 MPP( 27, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP28_TSMP8 MPP( 28, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP28_TSMP8 MPP( 28, 0x1, 0, 0, 0, 0, 1, 1, 1 ) #define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP28_GE1_COL MPP( 28, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP28_AU_EXTCLK MPP( 28, 0x4, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP28_AU_EXTCLK MPP( 28, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP28_LCD_D8 MPP( 28, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP29_TSMP9 MPP( 29, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP29_TSMP9 MPP( 29, 0x1, 0, 0, 0, 0, 1, 1, 1 ) #define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP29_GE1_TCLK MPP( 29, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP29_LCD_D9 MPP( 29, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP30_TSMP10 MPP( 30, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP30_TDM_PCLK MPP( 30, 0x2, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP30_TSMP10 MPP( 30, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP30_TDM_PCLK MPP( 30, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP30_GE1_RXCTL MPP( 30, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP30_LCD_D10 MPP( 30, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP31_TSMP11 MPP( 31, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP31_TDM_FS MPP( 31, 0x2, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP31_TSMP11 MPP( 31, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP31_TDM_FS MPP( 31, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP31_GE1_RXCLK MPP( 31, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP31_LCD_D11 MPP( 31, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP32_TSMP12 MPP( 32, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP32_TDM_DRX MPP( 32, 0x2, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP32_TSMP12 MPP( 32, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP32_TDM_DRX MPP( 32, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP32_GE1_TCLKOUT MPP( 32, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP32_LCD_D12 MPP( 32, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP33_GPO MPP( 33, 0x0, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP33_GE1_TXCTL MPP( 33, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP33_LCD_D13 MPP( 33, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP34_GE1_TXEN MPP( 34, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 1, 0, 0, 0, 1, 1 ) +#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 0, 0, 0, 0, 1, 1 ) #define MPP34_LCD_D14 MPP( 34, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP35_GE1_RXERR MPP( 35, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP35_LCD_D15 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP35_MII0_RXERR MPP( 35, 0xc, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP35_MII0_RXERR MPP( 35, 0xc, 0, 0, 1, 1, 1, 1, 1 ) #define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP36_TSMP0 MPP( 36, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP36_AU_SPDIFI MPP( 36, 0x4, 1, 0, 1, 0, 0, 1, 1 ) -#define MPP36_TW1_SDA MPP( 36, 0xb, 1, 1, 0, 0, 0, 0, 1 ) +#define MPP36_TSMP0 MPP( 36, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP36_AU_SPDIFI MPP( 36, 0x4, 0, 0, 1, 0, 0, 1, 1 ) +#define MPP36_TW1_SDA MPP( 36, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP37_TSMP1 MPP( 37, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 1, 1, 0, 0, 1, 1 ) -#define MPP37_TW1_SCK MPP( 37, 0xb, 1, 1, 0, 0, 0, 0, 1 ) +#define MPP37_TSMP1 MPP( 37, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 0, 1, 0, 0, 1, 1 ) +#define MPP37_TW1_SCK MPP( 37, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP38_TSMP2 MPP( 38, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP38_TSMP2 MPP( 38, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP38_LCD_D18 MPP( 38, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP39_TSMP3 MPP( 39, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP39_TSMP3 MPP( 39, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP39_LCD_D19 MPP( 39, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP40_TSMP4 MPP( 40, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP40_TSMP4 MPP( 40, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP40_LCD_D20 MPP( 40, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP41_TSMP5 MPP( 41, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 1, 0, 0, 0, 0, 1, 1 ) -#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP41_TSMP5 MPP( 41, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP41_LCD_D21 MPP( 41, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP42_TSMP6 MPP( 42, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP42_TSMP6 MPP( 42, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP42_LCD_D22 MPP( 42, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP43_TSMP7 MPP( 43, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP43_TSMP7 MPP( 43, 0x1, 0, 0, 0, 0, 0, 1, 1 ) #define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP43_AU_I2SDI MPP( 43, 0x4, 1, 0, 1, 0, 0, 1, 1 ) +#define MPP43_AU_I2SDI MPP( 43, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP43_LCD_D23 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP44_TSMP8 MPP( 44, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP44_TSMP8 MPP( 44, 0x1, 0, 0, 0, 0, 0, 1, 1 ) #define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP44_AU_EXTCLK MPP( 44, 0x4, 1, 0, 1, 0, 0, 1, 1 ) +#define MPP44_AU_EXTCLK MPP( 44, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP44_LCD_CLK MPP( 44, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP45_TSMP9 MPP( 45, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP45_TDM_PCLK MPP( 45, 0x2, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP45_TSMP9 MPP( 45, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP45_TDM_PCLK MPP( 45, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP245_LCD_E MPP( 45, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP46_TSMP10 MPP( 46, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP46_TDM_FS MPP( 46, 0x2, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP46_TSMP10 MPP( 46, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP46_TDM_FS MPP( 46, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP46_LCD_HSYNC MPP( 46, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP47_TSMP11 MPP( 47, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP47_TDM_DRX MPP( 47, 0x2, 1, 0, 0, 0, 0, 1, 1 ) +#define MPP47_TSMP11 MPP( 47, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP47_TDM_DRX MPP( 47, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP47_LCD_VSYNC MPP( 47, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1, 1 ) +#define MPP48_TSMP12 MPP( 48, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP48_LCD_D16 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1, 0 ) #define MPP49_GPO MPP( 49, 0x0, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1, 0 ) -#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP49_PTP_CLK MPP( 49, 0x5, 1, 0, 0, 0, 0, 1, 0 ) -#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP49_TSMP9 MPP( 49, 0x1, 0, 0, 0, 0, 0, 1, 0 ) +#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP49_PTP_CLK MPP( 49, 0x5, 0, 0, 0, 0, 0, 1, 0 ) +#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 0, 0, 0, 0, 0, 1 ) #define MPP49_LCD_D17 MPP( 49, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP_MAX 49 diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c index 41c252de0215..a446fc14221f 100644 --- a/arch/arm/mach-msm/hotplug.c +++ b/arch/arm/mach-msm/hotplug.c @@ -11,6 +11,7 @@ #include <linux/smp.h> #include <asm/cacheflush.h> +#include <asm/smp_plat.h> extern volatile int pen_release; diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 0b3e357c4c8c..db0117ec55f4 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -20,6 +20,7 @@ #include <asm/cacheflush.h> #include <asm/cputype.h> #include <asm/mach-types.h> +#include <asm/smp_plat.h> #include <mach/msm_iomap.h> diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 0cdd41004ad0..a5dcf766a3f9 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -19,6 +19,7 @@ #include <mach/mv78xx0.h> #include <mach/bridge-regs.h> #include <plat/cache-feroceon-l2.h> +#include <plat/ehci-orion.h> #include <plat/orion_nand.h> #include <plat/time.h> #include <plat/common.h> @@ -169,7 +170,7 @@ void __init mv78xx0_map_io(void) ****************************************************************************/ void __init mv78xx0_ehci0_init(void) { - orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0); + orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA); } diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h index b61b50927123..3752302ae2ee 100644 --- a/arch/arm/mach-mv78xx0/mpp.h +++ b/arch/arm/mach-mv78xx0/mpp.h @@ -24,296 +24,296 @@ #define MPP_78100_A0_MASK MPP(0, 0x0, 0, 0, 1) #define MPP0_GPIO MPP(0, 0x0, 1, 1, 1) -#define MPP0_GE0_COL MPP(0, 0x1, 1, 0, 1) -#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 1, 1) +#define MPP0_GE0_COL MPP(0, 0x1, 0, 0, 1) +#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 0, 1) #define MPP0_UNUSED MPP(0, 0x3, 0, 0, 1) #define MPP1_GPIO MPP(1, 0x0, 1, 1, 1) -#define MPP1_GE0_RXERR MPP(1, 0x1, 1, 0, 1) -#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 1, 1) +#define MPP1_GE0_RXERR MPP(1, 0x1, 0, 0, 1) +#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 0, 1) #define MPP1_UNUSED MPP(1, 0x3, 0, 0, 1) #define MPP2_GPIO MPP(2, 0x0, 1, 1, 1) -#define MPP2_GE0_CRS MPP(2, 0x1, 1, 0, 1) -#define MPP2_GE1_RXCTL MPP(2, 0x2, 1, 0, 1) +#define MPP2_GE0_CRS MPP(2, 0x1, 0, 0, 1) +#define MPP2_GE1_RXCTL MPP(2, 0x2, 0, 0, 1) #define MPP2_UNUSED MPP(2, 0x3, 0, 0, 1) #define MPP3_GPIO MPP(3, 0x0, 1, 1, 1) -#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 1, 1) -#define MPP3_GE1_RXCLK MPP(3, 0x2, 1, 0, 1) +#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 0, 1) +#define MPP3_GE1_RXCLK MPP(3, 0x2, 0, 0, 1) #define MPP3_UNUSED MPP(3, 0x3, 0, 0, 1) #define MPP4_GPIO MPP(4, 0x0, 1, 1, 1) -#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 1, 1) -#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 1, 1) +#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 0, 1) +#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 0, 1) #define MPP4_UNUSED MPP(4, 0x3, 0, 0, 1) #define MPP5_GPIO MPP(5, 0x0, 1, 1, 1) -#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 1, 1) -#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 1, 1) +#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 0, 1) +#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 0, 1) #define MPP5_UNUSED MPP(5, 0x3, 0, 0, 1) #define MPP6_GPIO MPP(6, 0x0, 1, 1, 1) -#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 1, 1) -#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 1, 1) +#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 0, 1) +#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 0, 1) #define MPP6_UNUSED MPP(6, 0x3, 0, 0, 1) #define MPP7_GPIO MPP(7, 0x0, 1, 1, 1) -#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 1, 1) -#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 1, 1) +#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 0, 1) +#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 0, 1) #define MPP7_UNUSED MPP(7, 0x3, 0, 0, 1) #define MPP8_GPIO MPP(8, 0x0, 1, 1, 1) -#define MPP8_GE0_RXD4 MPP(8, 0x1, 1, 0, 1) -#define MPP8_GE1_RXD0 MPP(8, 0x2, 1, 0, 1) +#define MPP8_GE0_RXD4 MPP(8, 0x1, 0, 0, 1) +#define MPP8_GE1_RXD0 MPP(8, 0x2, 0, 0, 1) #define MPP8_UNUSED MPP(8, 0x3, 0, 0, 1) #define MPP9_GPIO MPP(9, 0x0, 1, 1, 1) -#define MPP9_GE0_RXD5 MPP(9, 0x1, 1, 0, 1) -#define MPP9_GE1_RXD1 MPP(9, 0x2, 1, 0, 1) +#define MPP9_GE0_RXD5 MPP(9, 0x1, 0, 0, 1) +#define MPP9_GE1_RXD1 MPP(9, 0x2, 0, 0, 1) #define MPP9_UNUSED MPP(9, 0x3, 0, 0, 1) #define MPP10_GPIO MPP(10, 0x0, 1, 1, 1) -#define MPP10_GE0_RXD6 MPP(10, 0x1, 1, 0, 1) -#define MPP10_GE1_RXD2 MPP(10, 0x2, 1, 0, 1) +#define MPP10_GE0_RXD6 MPP(10, 0x1, 0, 0, 1) +#define MPP10_GE1_RXD2 MPP(10, 0x2, 0, 0, 1) #define MPP10_UNUSED MPP(10, 0x3, 0, 0, 1) #define MPP11_GPIO MPP(11, 0x0, 1, 1, 1) -#define MPP11_GE0_RXD7 MPP(11, 0x1, 1, 0, 1) -#define MPP11_GE1_RXD3 MPP(11, 0x2, 1, 0, 1) +#define MPP11_GE0_RXD7 MPP(11, 0x1, 0, 0, 1) +#define MPP11_GE1_RXD3 MPP(11, 0x2, 0, 0, 1) #define MPP11_UNUSED MPP(11, 0x3, 0, 0, 1) #define MPP12_GPIO MPP(12, 0x0, 1, 1, 1) -#define MPP12_M_BB MPP(12, 0x3, 1, 0, 1) -#define MPP12_UA0_CTSn MPP(12, 0x4, 1, 0, 1) -#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 1, 1) -#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 1, 1) +#define MPP12_M_BB MPP(12, 0x3, 0, 0, 1) +#define MPP12_UA0_CTSn MPP(12, 0x4, 0, 0, 1) +#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 0, 1) +#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 0, 1) #define MPP12_UNUSED MPP(12, 0x1, 0, 0, 1) #define MPP13_GPIO MPP(13, 0x0, 1, 1, 1) -#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 1, 1) -#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 1, 1) -#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 1, 1) -#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 1, 1) +#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 0, 1) +#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 0, 1) +#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 0, 1) +#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 0, 1) #define MPP13_UNUSED MPP(13, 0x1, 0, 0, 1) #define MPP14_GPIO MPP(14, 0x0, 1, 1, 1) -#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 1, 1) -#define MPP14_UA1_CTSn MPP(14, 0x4, 1, 0, 1) -#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 1, 1) -#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 1, 1) +#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 0, 1) +#define MPP14_UA1_CTSn MPP(14, 0x4, 0, 0, 1) +#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 0, 1) +#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 0, 1) #define MPP14_UNUSED MPP(14, 0x1, 0, 0, 1) #define MPP15_GPIO MPP(15, 0x0, 1, 1, 1) -#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 1, 1) -#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 1, 1) -#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 1, 1) -#define MPP15_TDM_SMISO MPP(15, 0x6, 1, 0, 1) +#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 0, 1) +#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 0, 1) +#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 0, 1) +#define MPP15_TDM_SMISO MPP(15, 0x6, 0, 0, 1) #define MPP15_UNUSED MPP(15, 0x1, 0, 0, 1) #define MPP16_GPIO MPP(16, 0x0, 1, 1, 1) -#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 1, 1) -#define MPP16_UA2_TXD MPP(16, 0x4, 0, 1, 1) -#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 1, 1) -#define MPP16_TDM_INTn MPP(16, 0x6, 1, 0, 1) +#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 0, 1) +#define MPP16_UA2_TXD MPP(16, 0x4, 0, 0, 1) +#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 0, 1) +#define MPP16_TDM_INTn MPP(16, 0x6, 0, 0, 1) #define MPP16_UNUSED MPP(16, 0x1, 0, 0, 1) #define MPP17_GPIO MPP(17, 0x0, 1, 1, 1) -#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 1, 1) -#define MPP17_UA2_RXD MPP(17, 0x4, 1, 0, 1) -#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 1, 1) -#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 1, 1) +#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 0, 1) +#define MPP17_UA2_RXD MPP(17, 0x4, 0, 0, 1) +#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 0, 1) +#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 0, 1) #define MPP17_UNUSED MPP(17, 0x1, 0, 0, 1) #define MPP18_GPIO MPP(18, 0x0, 1, 1, 1) -#define MPP18_UA0_CTSn MPP(18, 0x4, 1, 0, 1) -#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 1, 1) +#define MPP18_UA0_CTSn MPP(18, 0x4, 0, 0, 1) +#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 0, 1) #define MPP18_UNUSED MPP(18, 0x1, 0, 0, 1) #define MPP19_GPIO MPP(19, 0x0, 1, 1, 1) -#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 1, 1) -#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 1, 1) +#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 0, 1) +#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 0, 1) #define MPP19_UNUSED MPP(19, 0x1, 0, 0, 1) #define MPP20_GPIO MPP(20, 0x0, 1, 1, 1) -#define MPP20_UA1_CTSs MPP(20, 0x4, 1, 0, 1) -#define MPP20_TDM_PCLK MPP(20, 0x6, 1, 1, 0) +#define MPP20_UA1_CTSs MPP(20, 0x4, 0, 0, 1) +#define MPP20_TDM_PCLK MPP(20, 0x6, 0, 0, 0) #define MPP20_UNUSED MPP(20, 0x1, 0, 0, 1) #define MPP21_GPIO MPP(21, 0x0, 1, 1, 1) -#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 1, 1) -#define MPP21_TDM_FSYNC MPP(21, 0x6, 1, 1, 0) +#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 0, 1) +#define MPP21_TDM_FSYNC MPP(21, 0x6, 0, 0, 0) #define MPP21_UNUSED MPP(21, 0x1, 0, 0, 1) #define MPP22_GPIO MPP(22, 0x0, 1, 1, 1) -#define MPP22_UA3_TDX MPP(22, 0x4, 0, 1, 1) -#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 1, 1) -#define MPP22_TDM_DRX MPP(22, 0x6, 1, 0, 1) +#define MPP22_UA3_TDX MPP(22, 0x4, 0, 0, 1) +#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 0, 1) +#define MPP22_TDM_DRX MPP(22, 0x6, 0, 0, 1) #define MPP22_UNUSED MPP(22, 0x1, 0, 0, 1) #define MPP23_GPIO MPP(23, 0x0, 1, 1, 1) -#define MPP23_UA3_RDX MPP(23, 0x4, 1, 0, 1) -#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 1, 1) -#define MPP23_TDM_DTX MPP(23, 0x6, 0, 1, 1) +#define MPP23_UA3_RDX MPP(23, 0x4, 0, 0, 1) +#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 0, 1) +#define MPP23_TDM_DTX MPP(23, 0x6, 0, 0, 1) #define MPP23_UNUSED MPP(23, 0x1, 0, 0, 1) #define MPP24_GPIO MPP(24, 0x0, 1, 1, 1) -#define MPP24_UA2_TXD MPP(24, 0x4, 0, 1, 1) -#define MPP24_TDM_INTn MPP(24, 0x6, 1, 0, 1) +#define MPP24_UA2_TXD MPP(24, 0x4, 0, 0, 1) +#define MPP24_TDM_INTn MPP(24, 0x6, 0, 0, 1) #define MPP24_UNUSED MPP(24, 0x1, 0, 0, 1) #define MPP25_GPIO MPP(25, 0x0, 1, 1, 1) -#define MPP25_UA2_RXD MPP(25, 0x4, 1, 0, 1) -#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 1, 1) +#define MPP25_UA2_RXD MPP(25, 0x4, 0, 0, 1) +#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 0, 1) #define MPP25_UNUSED MPP(25, 0x1, 0, 0, 1) #define MPP26_GPIO MPP(26, 0x0, 1, 1, 1) -#define MPP26_UA2_CTSn MPP(26, 0x4, 1, 0, 1) -#define MPP26_TDM_PCLK MPP(26, 0x6, 1, 1, 1) +#define MPP26_UA2_CTSn MPP(26, 0x4, 0, 0, 1) +#define MPP26_TDM_PCLK MPP(26, 0x6, 0, 0, 1) #define MPP26_UNUSED MPP(26, 0x1, 0, 0, 1) #define MPP27_GPIO MPP(27, 0x0, 1, 1, 1) -#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 1, 1) -#define MPP27_TDM_FSYNC MPP(27, 0x6, 1, 1, 1) +#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 0, 1) +#define MPP27_TDM_FSYNC MPP(27, 0x6, 0, 0, 1) #define MPP27_UNUSED MPP(27, 0x1, 0, 0, 1) #define MPP28_GPIO MPP(28, 0x0, 1, 1, 1) -#define MPP28_UA3_TXD MPP(28, 0x4, 0, 1, 1) -#define MPP28_TDM_DRX MPP(28, 0x6, 1, 0, 1) +#define MPP28_UA3_TXD MPP(28, 0x4, 0, 0, 1) +#define MPP28_TDM_DRX MPP(28, 0x6, 0, 0, 1) #define MPP28_UNUSED MPP(28, 0x1, 0, 0, 1) #define MPP29_GPIO MPP(29, 0x0, 1, 1, 1) -#define MPP29_UA3_RXD MPP(29, 0x4, 1, 0, 1) -#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 1, 1) -#define MPP29_TDM_DTX MPP(29, 0x6, 0, 1, 1) +#define MPP29_UA3_RXD MPP(29, 0x4, 0, 0, 1) +#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 0, 1) +#define MPP29_TDM_DTX MPP(29, 0x6, 0, 0, 1) #define MPP29_UNUSED MPP(29, 0x1, 0, 0, 1) #define MPP30_GPIO MPP(30, 0x0, 1, 1, 1) -#define MPP30_UA3_CTSn MPP(30, 0x4, 1, 0, 1) +#define MPP30_UA3_CTSn MPP(30, 0x4, 0, 0, 1) #define MPP30_UNUSED MPP(30, 0x1, 0, 0, 1) #define MPP31_GPIO MPP(31, 0x0, 1, 1, 1) -#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 1, 1) -#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 1, 1) +#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 0, 1) +#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 0, 1) #define MPP31_UNUSED MPP(31, 0x1, 0, 0, 1) #define MPP32_GPIO MPP(32, 0x1, 1, 1, 1) -#define MPP32_UA3_TDX MPP(32, 0x4, 0, 1, 1) -#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 1, 1) -#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 1, 1) +#define MPP32_UA3_TDX MPP(32, 0x4, 0, 0, 1) +#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 0, 1) +#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 0, 1) #define MPP32_UNUSED MPP(32, 0x3, 0, 0, 1) #define MPP33_GPIO MPP(33, 0x1, 1, 1, 1) -#define MPP33_UA3_RDX MPP(33, 0x4, 1, 0, 1) -#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 1, 1) +#define MPP33_UA3_RDX MPP(33, 0x4, 0, 0, 1) +#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 0, 1) #define MPP33_UNUSED MPP(33, 0x3, 0, 0, 1) #define MPP34_GPIO MPP(34, 0x1, 1, 1, 1) -#define MPP34_UA2_TDX MPP(34, 0x4, 0, 1, 1) -#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 1, 1) +#define MPP34_UA2_TDX MPP(34, 0x4, 0, 0, 1) +#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 0, 1) #define MPP34_UNUSED MPP(34, 0x3, 0, 0, 1) #define MPP35_GPIO MPP(35, 0x1, 1, 1, 1) -#define MPP35_UA2_RDX MPP(35, 0x4, 1, 0, 1) -#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 1, 1) +#define MPP35_UA2_RDX MPP(35, 0x4, 0, 0, 1) +#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 0, 1) #define MPP35_UNUSED MPP(35, 0x3, 0, 0, 1) #define MPP36_GPIO MPP(36, 0x1, 1, 1, 1) -#define MPP36_UA0_CTSn MPP(36, 0x2, 1, 0, 1) -#define MPP36_UA2_TDX MPP(36, 0x4, 0, 1, 1) -#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 1, 1) +#define MPP36_UA0_CTSn MPP(36, 0x2, 0, 0, 1) +#define MPP36_UA2_TDX MPP(36, 0x4, 0, 0, 1) +#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 0, 1) #define MPP36_UNUSED MPP(36, 0x3, 0, 0, 1) #define MPP37_GPIO MPP(37, 0x1, 1, 1, 1) -#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 1, 1) -#define MPP37_UA2_RXD MPP(37, 0x4, 1, 0, 1) -#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 1, 1) -#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 1, 1) +#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 0, 1) +#define MPP37_UA2_RXD MPP(37, 0x4, 0, 0, 1) +#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 0, 1) +#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 0, 1) #define MPP37_UNUSED MPP(37, 0x3, 0, 0, 1) #define MPP38_GPIO MPP(38, 0x1, 1, 1, 1) -#define MPP38_UA1_CTSn MPP(38, 0x2, 1, 0, 1) -#define MPP38_UA3_TXD MPP(38, 0x4, 0, 1, 1) -#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 1, 1) -#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 1, 1) +#define MPP38_UA1_CTSn MPP(38, 0x2, 0, 0, 1) +#define MPP38_UA3_TXD MPP(38, 0x4, 0, 0, 1) +#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 0, 1) +#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 0, 1) #define MPP38_UNUSED MPP(38, 0x3, 0, 0, 1) #define MPP39_GPIO MPP(39, 0x1, 1, 1, 1) -#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 1, 1) -#define MPP39_UA3_RXD MPP(39, 0x4, 1, 0, 1) -#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 1, 1) -#define MPP39_TDM_SMISO MPP(39, 0x6, 1, 0, 1) +#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 0, 1) +#define MPP39_UA3_RXD MPP(39, 0x4, 0, 0, 1) +#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 0, 1) +#define MPP39_TDM_SMISO MPP(39, 0x6, 0, 0, 1) #define MPP39_UNUSED MPP(39, 0x3, 0, 0, 1) #define MPP40_GPIO MPP(40, 0x1, 1, 1, 1) -#define MPP40_TDM_INTn MPP(40, 0x6, 1, 0, 1) +#define MPP40_TDM_INTn MPP(40, 0x6, 0, 0, 1) #define MPP40_UNUSED MPP(40, 0x0, 0, 0, 1) #define MPP41_GPIO MPP(41, 0x1, 1, 1, 1) -#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 1, 1) +#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 0, 1) #define MPP41_UNUSED MPP(41, 0x0, 0, 0, 1) #define MPP42_GPIO MPP(42, 0x1, 1, 1, 1) -#define MPP42_TDM_PCLK MPP(42, 0x6, 1, 1, 1) +#define MPP42_TDM_PCLK MPP(42, 0x6, 0, 0, 1) #define MPP42_UNUSED MPP(42, 0x0, 0, 0, 1) #define MPP43_GPIO MPP(43, 0x1, 1, 1, 1) -#define MPP43_TDM_FSYNC MPP(43, 0x6, 1, 1, 1) +#define MPP43_TDM_FSYNC MPP(43, 0x6, 0, 0, 1) #define MPP43_UNUSED MPP(43, 0x0, 0, 0, 1) #define MPP44_GPIO MPP(44, 0x1, 1, 1, 1) -#define MPP44_TDM_DRX MPP(44, 0x6, 1, 0, 1) +#define MPP44_TDM_DRX MPP(44, 0x6, 0, 0, 1) #define MPP44_UNUSED MPP(44, 0x0, 0, 0, 1) #define MPP45_GPIO MPP(45, 0x1, 1, 1, 1) -#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 1, 1) -#define MPP45_TDM_DRX MPP(45, 0x6, 0, 1, 1) +#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 0, 1) +#define MPP45_TDM_DRX MPP(45, 0x6, 0, 0, 1) #define MPP45_UNUSED MPP(45, 0x0, 0, 0, 1) #define MPP46_GPIO MPP(46, 0x1, 1, 1, 1) -#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 1, 1) +#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 0, 1) #define MPP46_UNUSED MPP(46, 0x0, 0, 0, 1) @@ -323,14 +323,14 @@ #define MPP48_GPIO MPP(48, 0x1, 1, 1, 1) -#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 1, 1) +#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 0, 1) #define MPP48_UNUSED MPP(48, 0x2, 0, 0, 1) #define MPP49_GPIO MPP(49, 0x1, 1, 1, 1) -#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 1, 1) -#define MPP49_M_BB MPP(49, 0x4, 1, 0, 1) +#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 0, 1) +#define MPP49_M_BB MPP(49, 0x4, 0, 0, 1) #define MPP49_UNUSED MPP(49, 0x2, 0, 0, 1) diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig deleted file mode 100644 index af0c212e3c7b..000000000000 --- a/arch/arm/mach-mx5/Kconfig +++ /dev/null @@ -1,244 +0,0 @@ -if ARCH_MX5 - -# ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single -# image. So for most time, SOC_IMX50/51/53 should be used. - -config ARCH_MX51 - bool - -config ARCH_MX50 - bool - -config ARCH_MX53 - bool - -config SOC_IMX50 - bool - select CPU_V7 - select ARM_L1_CACHE_SHIFT_6 - select MXC_TZIC - select ARCH_MXC_IOMUX_V3 - select ARCH_MXC_AUDMUX_V2 - select ARCH_HAS_CPUFREQ - select ARCH_MX50 - -config SOC_IMX51 - bool - select CPU_V7 - select ARM_L1_CACHE_SHIFT_6 - select MXC_TZIC - select ARCH_MXC_IOMUX_V3 - select ARCH_MXC_AUDMUX_V2 - select ARCH_HAS_CPUFREQ - select ARCH_MX51 - -config SOC_IMX53 - bool - select CPU_V7 - select ARM_L1_CACHE_SHIFT_6 - select MXC_TZIC - select ARCH_MXC_IOMUX_V3 - select ARCH_MX53 - -#comment "i.MX50 machines:" - -config MACH_MX50_RDP - bool "Support MX50 reference design platform" - depends on BROKEN - select SOC_IMX50 - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for MX50 reference design platform (RDP) board. This - includes specific configurations for the board and its peripherals. - -comment "i.MX51 machines:" - -config MACH_IMX51_DT - bool "Support i.MX51 platforms from device tree" - select SOC_IMX51 - select USE_OF - select MACH_MX51_BABBAGE - help - Include support for Freescale i.MX51 based platforms - using the device tree for discovery - -config MACH_MX51_BABBAGE - bool "Support MX51 BABBAGE platforms" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for MX51 Babbage platform, also known as MX51EVK in - u-boot. This includes specific configurations for the board and its - peripherals. - -config MACH_MX51_3DS - bool "Support MX51PDK (3DS)" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_DEBUG_BOARD - help - Include support for MX51PDK (3DS) platform. This includes specific - configurations for the board and its peripherals. - -config MACH_EUKREA_CPUIMX51 - bool "Support Eukrea CPUIMX51 module" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for Eukrea CPUIMX51 platform. This includes - specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX51 - default MACH_EUKREA_MBIMX51_BASEBOARD - -config MACH_EUKREA_MBIMX51_BASEBOARD - prompt "Eukrea MBIMX51 development board" - bool - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMX51 evaluation board. - -endchoice - -config MACH_EUKREA_CPUIMX51SD - bool "Support Eukrea CPUIMX51SD module" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for Eukrea CPUIMX51SD platform. This includes - specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX51SD - default MACH_EUKREA_MBIMXSD51_BASEBOARD - -config MACH_EUKREA_MBIMXSD51_BASEBOARD - prompt "Eukrea MBIMXSD development board" - bool - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMXSD evaluation board. - -endchoice - -config MX51_EFIKA_COMMON - bool - select SOC_IMX51 - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_PATA_IMX - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_ULPI if USB_ULPI - -config MACH_MX51_EFIKAMX - bool "Support MX51 Genesi Efika MX nettop" - select LEDS_GPIO_REGISTER - select MX51_EFIKA_COMMON - help - Include support for Genesi Efika MX nettop. This includes specific - configurations for the board and its peripherals. - -config MACH_MX51_EFIKASB - bool "Support MX51 Genesi Efika Smartbook" - select LEDS_GPIO_REGISTER - select MX51_EFIKA_COMMON - help - Include support for Genesi Efika Smartbook. This includes specific - configurations for the board and its peripherals. - -comment "i.MX53 machines:" - -config MACH_IMX53_DT - bool "Support i.MX53 platforms from device tree" - select SOC_IMX53 - select USE_OF - select MACH_MX53_ARD - select MACH_MX53_EVK - select MACH_MX53_LOCO - select MACH_MX53_SMD - help - Include support for Freescale i.MX53 based platforms - using the device tree for discovery - -config MACH_MX53_EVK - bool "Support MX53 EVK platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - help - Include support for MX53 EVK platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_SMD - bool "Support MX53 SMD platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - help - Include support for MX53 SMD platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_LOCO - bool "Support MX53 LOCO platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_GPIO_KEYS - select LEDS_GPIO_REGISTER - help - Include support for MX53 LOCO platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_ARD - bool "Support MX53 ARD platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_GPIO_KEYS - help - Include support for MX53 ARD platform. This includes specific - configurations for the board and its peripherals. - -endif diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile deleted file mode 100644 index 0fc60807fa2b..000000000000 --- a/arch/arm/mach-mx5/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. -obj-y := cpu.o mm.o clock-mx51-mx53.o ehci.o system.o - -obj-$(CONFIG_PM) += pm-imx5.o -obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o -obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o -obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o -obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o -obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o -obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o -obj-$(CONFIG_MACH_MX53_ARD) += board-mx53_ard.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o -obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o -obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o -obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o -obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o -obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o -obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o - -obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o -obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot deleted file mode 100644 index ca207ca305ec..000000000000 --- a/arch/arm/mach-mx5/Makefile.boot +++ /dev/null @@ -1,9 +0,0 @@ - zreladdr-$(CONFIG_ARCH_MX50) += 0x70008000 -params_phys-$(CONFIG_ARCH_MX50) := 0x70000100 -initrd_phys-$(CONFIG_ARCH_MX50) := 0x70800000 - zreladdr-$(CONFIG_ARCH_MX51) += 0x90008000 -params_phys-$(CONFIG_ARCH_MX51) := 0x90000100 -initrd_phys-$(CONFIG_ARCH_MX51) := 0x90800000 - zreladdr-$(CONFIG_ARCH_MX53) += 0x70008000 -params_phys-$(CONFIG_ARCH_MX53) := 0x70000100 -initrd_phys-$(CONFIG_ARCH_MX53) := 0x70800000 diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c deleted file mode 100644 index 98052fc852c7..000000000000 --- a/arch/arm/mach-mx5/pm-imx5.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ -#include <linux/suspend.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/err.h> -#include <asm/cacheflush.h> -#include <asm/tlbflush.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include "crm_regs.h" - -static struct clk *gpc_dvfs_clk; - -static int mx5_suspend_prepare(void) -{ - return clk_enable(gpc_dvfs_clk); -} - -static int mx5_suspend_enter(suspend_state_t state) -{ - switch (state) { - case PM_SUSPEND_MEM: - mx5_cpu_lp_set(STOP_POWER_OFF); - break; - case PM_SUSPEND_STANDBY: - mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); - break; - default: - return -EINVAL; - } - - if (state == PM_SUSPEND_MEM) { - local_flush_tlb_all(); - flush_cache_all(); - - /*clear the EMPGC0/1 bits */ - __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR); - __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR); - } - cpu_do_idle(); - return 0; -} - -static void mx5_suspend_finish(void) -{ - clk_disable(gpc_dvfs_clk); -} - -static int mx5_pm_valid(suspend_state_t state) -{ - return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX); -} - -static const struct platform_suspend_ops mx5_suspend_ops = { - .valid = mx5_pm_valid, - .prepare = mx5_suspend_prepare, - .enter = mx5_suspend_enter, - .finish = mx5_suspend_finish, -}; - -static int __init mx5_pm_init(void) -{ - if (gpc_dvfs_clk == NULL) - gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); - - if (!IS_ERR(gpc_dvfs_clk)) { - if (cpu_is_mx51()) - suspend_set_ops(&mx5_suspend_ops); - } else - return -EPERM; - - return 0; -} -device_initcall(mx5_pm_init); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index a8ba7b96dcd1..d965da45160e 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -33,7 +33,6 @@ config ARCH_OMAP3 default y select CPU_V7 select USB_ARCH_HAS_EHCI - select ARM_L1_CACHE_SHIFT_6 if !ARCH_OMAP4 select ARCH_HAS_OPP select PM_OPP if PM select ARM_CPU_SUSPEND if PM @@ -214,13 +213,12 @@ config MACH_OMAP3_PANDORA depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP3_TOUCHBOOK bool "OMAP3 Touch Book" depends on ARCH_OMAP3 default y - select BACKLIGHT_CLASS_DEVICE config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" @@ -266,7 +264,7 @@ config MACH_OMAP_ZOOM2 select SERIAL_8250 select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" @@ -276,7 +274,7 @@ config MACH_OMAP_ZOOM3 select SERIAL_8250 select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_CM_T35 bool "CompuLab CM-T35/CM-T3730 modules" @@ -335,7 +333,7 @@ config MACH_OMAP_4430SDP depends on ARCH_OMAP4 select OMAP_PACKAGE_CBL select OMAP_PACKAGE_CBS - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP4_PANDA bool "OMAP4 Panda Board" @@ -343,7 +341,7 @@ config MACH_OMAP4_PANDA depends on ARCH_OMAP4 select OMAP_PACKAGE_CBL select OMAP_PACKAGE_CBS - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config OMAP3_EMU bool "OMAP3 debugging peripherals" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fc9b238cbc19..bd76394ccaf8 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -11,9 +11,9 @@ hwmod-common = omap_hwmod.o \ omap_hwmod_common_data.o clock-common = clock.o clock_common_data.o \ clkt_dpll.o clkt_clksel.o -secure-common = omap-smc.o omap-secure.o +secure-common = omap-smc.o omap-secure.o -obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common) +obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 39fba9df17fb..4e9071589bfb 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -52,8 +52,9 @@ #define ETH_KS8851_QUART 138 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 #define OMAP4_SFH7741_ENABLE_GPIO 188 -#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ #define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ #define DLP_POWER_ON_GPIO 40 @@ -603,8 +604,9 @@ static void __init omap_sfh7741prox_init(void) } static struct gpio sdp4430_hdmi_gpios[] = { - { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, + { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, }; static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) @@ -621,8 +623,7 @@ static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev) { - gpio_free(HDMI_GPIO_LS_OE); - gpio_free(HDMI_GPIO_HPD); + gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios)); } static struct nokia_dsi_panel_data dsi1_panel = { @@ -738,6 +739,10 @@ static void sdp4430_lcd_init(void) pr_err("%s: Could not get lcd2_reset_gpio\n", __func__); } +static struct omap_dss_hdmi_data sdp4430_hdmi_data = { + .hpd_gpio = HDMI_GPIO_HPD, +}; + static struct omap_dss_device sdp4430_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -745,6 +750,7 @@ static struct omap_dss_device sdp4430_hdmi_device = { .platform_enable = sdp4430_panel_enable_hdmi, .platform_disable = sdp4430_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &sdp4430_hdmi_data, }; static struct picodlp_panel_data sdp4430_picodlp_pdata = { @@ -808,7 +814,7 @@ static struct omap_dss_board_info sdp4430_dss_data = { .default_device = &sdp4430_lcd_device, }; -static void omap_4430sdp_display_init(void) +static void __init omap_4430sdp_display_init(void) { int r; @@ -829,6 +835,10 @@ static void omap_4430sdp_display_init(void) omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); else omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } #ifdef CONFIG_OMAP_MUX @@ -841,7 +851,7 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif -static void omap4_sdp4430_wifi_mux_init(void) +static void __init omap4_sdp4430_wifi_mux_init(void) { omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT | OMAP_PIN_OFF_WAKEUPENABLE); @@ -868,12 +878,17 @@ static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = { .board_tcxo_clock = WL12XX_TCXOCLOCK_26, }; -static void omap4_sdp4430_wifi_init(void) +static void __init omap4_sdp4430_wifi_init(void) { + int ret; + omap4_sdp4430_wifi_mux_init(); - if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data)) - pr_err("Error setting wl12xx data\n"); - platform_device_register(&omap_vwlan_device); + ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data); + if (ret) + pr_err("Error setting wl12xx data: %d\n", ret); + ret = platform_device_register(&omap_vwlan_device); + if (ret) + pr_err("Error registering wl12xx device: %d\n", ret); } static void __init omap_4430sdp_init(void) diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index e921e3be24a4..d73316ed4207 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -437,7 +437,7 @@ static struct usbhs_omap_board_data usbhs_bdata __initdata = { .reset_gpio_port[2] = -EINVAL }; -static void cm_t35_init_usbh(void) +static void __init cm_t35_init_usbh(void) { int err; diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index d58756060483..ad497620539b 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -17,6 +17,7 @@ #include <linux/i2c/twl.h> #include <mach/hardware.h> +#include <asm/hardware/gic.h> #include <asm/mach/arch.h> #include <plat/board.h> @@ -102,6 +103,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_irq = omap2_init_irq, + .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, .timer = &omap2_timer, .dt_compat = omap242x_boards_compat, @@ -141,6 +143,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_init, .timer = &omap3_timer, .dt_compat = omap3_boards_compat, @@ -160,6 +163,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .map_io = omap4_map_io, .init_early = omap4430_init_early, .init_irq = gic_init_irq, + .handle_irq = gic_handle_irq, .init_machine = omap4_init, .timer = &omap4_timer, .dt_compat = omap4_boards_compat, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 003fe34c9343..c775bead1497 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -617,6 +617,21 @@ static struct gpio omap3_evm_ehci_gpios[] __initdata = { { OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW, "select EHCI port" }, }; +static void __init omap3_evm_wl12xx_init(void) +{ +#ifdef CONFIG_WL12XX_PLATFORM_DATA + int ret; + + /* WL12xx WLAN Init */ + ret = wl12xx_set_platform_data(&omap3evm_wlan_data); + if (ret) + pr_err("error setting wl12xx data: %d\n", ret); + ret = platform_device_register(&omap3evm_wlan_regulator); + if (ret) + pr_err("error registering wl12xx device: %d\n", ret); +#endif +} + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); @@ -665,13 +680,7 @@ static void __init omap3_evm_init(void) omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); omap3evm_init_smsc911x(); omap3_evm_display_init(); - -#ifdef CONFIG_WL12XX_PLATFORM_DATA - /* WL12xx WLAN Init */ - if (wl12xx_set_platform_data(&omap3evm_wlan_data)) - pr_err("error setting wl12xx data\n"); - platform_device_register(&omap3evm_wlan_regulator); -#endif + omap3_evm_wl12xx_init(); } MACHINE_START(OMAP3EVM, "OMAP3 EVM") diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 30ad40db2cf3..28fc271f7031 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -51,8 +51,9 @@ #define GPIO_HUB_NRESET 62 #define GPIO_WIFI_PMENA 43 #define GPIO_WIFI_IRQ 53 -#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ /* wl127x BT, FM, GPS connectivity chip */ static int wl1271_gpios[] = {46, -1, -1}; @@ -413,8 +414,9 @@ int __init omap4_panda_dvi_init(void) } static struct gpio panda_hdmi_gpios[] = { - { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, + { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, }; static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) @@ -431,10 +433,13 @@ static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev) { - gpio_free(HDMI_GPIO_LS_OE); - gpio_free(HDMI_GPIO_HPD); + gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios)); } +static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { + .hpd_gpio = HDMI_GPIO_HPD, +}; + static struct omap_dss_device omap4_panda_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -442,6 +447,7 @@ static struct omap_dss_device omap4_panda_hdmi_device = { .platform_enable = omap4_panda_panel_enable_hdmi, .platform_disable = omap4_panda_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &omap4_panda_hdmi_data, }; static struct omap_dss_device *omap4_panda_dss_devices[] = { @@ -473,18 +479,24 @@ void omap4_panda_display_init(void) omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); else omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } static void __init omap4_panda_init(void) { int package = OMAP_PACKAGE_CBS; + int ret; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); - if (wl12xx_set_platform_data(&omap_panda_wlan_data)) - pr_err("error setting wl12xx data\n"); + ret = wl12xx_set_platform_data(&omap_panda_wlan_data); + if (ret) + pr_err("error setting wl12xx data: %d\n", ret); omap4_panda_i2c_init(); platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 8d7ce11cfeaf..c126461836ac 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -296,8 +296,10 @@ static void enable_board_wakeup_source(void) void __init zoom_peripherals_init(void) { - if (wl12xx_set_platform_data(&omap_zoom_wlan_data)) - pr_err("error setting wl12xx data\n"); + int ret = wl12xx_set_platform_data(&omap_zoom_wlan_data); + + if (ret) + pr_err("error setting wl12xx data: %d\n", ret); omap_i2c_init(); platform_device_register(&omap_vwlan_device); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 0b510ad01a00..283d11eae693 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -405,6 +405,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) break; default: pr_err("Invalid McSPI Revision value\n"); + kfree(pdata); return -EINVAL; } diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 3c446d1a1781..3677b1f58b85 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -103,12 +103,8 @@ static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) u32 reg; u16 control_i2c_1; - /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ - omap_mux_init_signal("hdmi_hpd", - OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_cec", OMAP_PIN_INPUT_PULLUP); - /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ omap_mux_init_signal("hdmi_ddc_scl", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_ddc_sda", diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 130034bf01d5..dfffbbf4c009 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -528,7 +528,13 @@ int gpmc_cs_configure(int cs, int cmd, int wval) case GPMC_CONFIG_DEV_SIZE: regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + /* clear 2 target bits */ + regval &= ~GPMC_CONFIG1_DEVICESIZE(3); + + /* set the proper value */ regval |= GPMC_CONFIG1_DEVICESIZE(wval); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); break; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index bd844af13af5..b40c28895298 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -175,14 +175,15 @@ static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc) { u32 reg; - if (mmc->slots[0].internal_clock) { - reg = omap_ctrl_readl(control_devconf1_offset); + reg = omap_ctrl_readl(control_devconf1_offset); + if (mmc->slots[0].internal_clock) reg |= OMAP2_MMCSDIO2ADPCLKISEL; - omap_ctrl_writel(reg, control_devconf1_offset); - } + else + reg &= ~OMAP2_MMCSDIO2ADPCLKISEL; + omap_ctrl_writel(reg, control_devconf1_offset); } -static void hsmmc23_before_set_reg(struct device *dev, int slot, +static void hsmmc2_before_set_reg(struct device *dev, int slot, int power_on, int vdd) { struct omap_mmc_platform_data *mmc = dev->platform_data; @@ -292,8 +293,8 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, } } -static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, - struct omap_mmc_platform_data *mmc) +static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, + struct omap_mmc_platform_data *mmc) { char *hc_name; @@ -407,14 +408,13 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, c->caps &= ~MMC_CAP_8_BIT_DATA; c->caps |= MMC_CAP_4_BIT_DATA; } - /* FALLTHROUGH */ - case 3: if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { /* off-chip level shifting, or none */ - mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; + mmc->slots[0].before_set_reg = hsmmc2_before_set_reg; mmc->slots[0].after_set_reg = NULL; } break; + case 3: case 4: case 5: mmc->slots[0].before_set_reg = NULL; @@ -430,7 +430,7 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, #define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 -void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) +void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) { struct omap_hwmod *oh; struct platform_device *pdev; @@ -487,7 +487,7 @@ done: kfree(mmc_data); } -void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) +void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) { u32 reg; diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3f174d51f67f..eb50c29fb644 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -388,7 +388,7 @@ static void __init omap_hwmod_init_postsetup(void) omap_pm_if_early_init(); } -#ifdef CONFIG_ARCH_OMAP2 +#ifdef CONFIG_SOC_OMAP2420 void __init omap2420_init_early(void) { omap2_set_globals_242x(); @@ -400,7 +400,9 @@ void __init omap2420_init_early(void) omap_hwmod_init_postsetup(); omap2420_clk_init(); } +#endif +#ifdef CONFIG_SOC_OMAP2430 void __init omap2430_init_early(void) { omap2_set_globals_243x(); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index e1cc75d1a57a..fb8bc9fa43b1 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -100,8 +100,8 @@ void omap_mux_write_array(struct omap_mux_partition *partition, static char *omap_mux_options; -static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, - int gpio, int val) +static int _omap_mux_init_gpio(struct omap_mux_partition *partition, + int gpio, int val) { struct omap_mux_entry *e; struct omap_mux *gpio_mux = NULL; @@ -145,7 +145,7 @@ static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, return 0; } -int __init omap_mux_init_gpio(int gpio, int val) +int omap_mux_init_gpio(int gpio, int val) { struct omap_mux_partition *partition; int ret; @@ -159,9 +159,9 @@ int __init omap_mux_init_gpio(int gpio, int val) return -ENODEV; } -static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, - const char *muxname, - struct omap_mux **found_mux) +static int _omap_mux_get_by_name(struct omap_mux_partition *partition, + const char *muxname, + struct omap_mux **found_mux) { struct omap_mux *mux = NULL; struct omap_mux_entry *e; @@ -240,7 +240,7 @@ omap_mux_get_by_name(const char *muxname, return -ENODEV; } -int __init omap_mux_init_signal(const char *muxname, int val) +int omap_mux_init_signal(const char *muxname, int val) { struct omap_mux_partition *partition = NULL; struct omap_mux *mux = NULL; @@ -1094,8 +1094,8 @@ static void omap_mux_init_package(struct omap_mux *superset, omap_mux_package_init_balls(package_balls, superset); } -static void omap_mux_init_signals(struct omap_mux_partition *partition, - struct omap_board_mux *board_mux) +static void __init omap_mux_init_signals(struct omap_mux_partition *partition, + struct omap_board_mux *board_mux) { omap_mux_set_cmdline_signals(); omap_mux_write_array(partition, board_mux); @@ -1109,8 +1109,8 @@ static void omap_mux_init_package(struct omap_mux *superset, { } -static void omap_mux_init_signals(struct omap_mux_partition *partition, - struct omap_board_mux *board_mux) +static void __init omap_mux_init_signals(struct omap_mux_partition *partition, + struct omap_board_mux *board_mux) { } diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index b13ef7ef5ef4..503ac777a2ba 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -18,6 +18,7 @@ #include <linux/linkage.h> #include <linux/init.h> + __CPUINIT /* * OMAP4 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 5192cabb40ed..eba6cd3816f5 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1517,8 +1517,8 @@ static int _enable(struct omap_hwmod *oh) if (oh->_state != _HWMOD_STATE_INITIALIZED && oh->_state != _HWMOD_STATE_IDLE && oh->_state != _HWMOD_STATE_DISABLED) { - WARN(1, "omap_hwmod: %s: enabled state can only be entered " - "from initialized, idle, or disabled state\n", oh->name); + WARN(1, "omap_hwmod: %s: enabled state can only be entered from initialized, idle, or disabled state\n", + oh->name); return -EINVAL; } @@ -1600,8 +1600,8 @@ static int _idle(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: idling\n", oh->name); if (oh->_state != _HWMOD_STATE_ENABLED) { - WARN(1, "omap_hwmod: %s: idle state can only be entered from " - "enabled state\n", oh->name); + WARN(1, "omap_hwmod: %s: idle state can only be entered from enabled state\n", + oh->name); return -EINVAL; } @@ -1682,8 +1682,8 @@ static int _shutdown(struct omap_hwmod *oh) if (oh->_state != _HWMOD_STATE_IDLE && oh->_state != _HWMOD_STATE_ENABLED) { - WARN(1, "omap_hwmod: %s: disabled state can only be entered " - "from idle, or enabled state\n", oh->name); + WARN(1, "omap_hwmod: %s: disabled state can only be entered from idle, or enabled state\n", + oh->name); return -EINVAL; } @@ -2240,8 +2240,8 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh) BUG_ON(!oh); if (!oh->class->sysc || !oh->class->sysc->sysc_flags) { - WARN(1, "omap_device: %s: OCP barrier impossible due to " - "device configuration\n", oh->name); + WARN(1, "omap_device: %s: OCP barrier impossible due to device configuration\n", + oh->name); return; } diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index c11273da5dcc..f08e442af397 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -56,27 +56,6 @@ struct omap_hwmod_class omap2_dss_hwmod_class = { }; /* - * 'dispc' class - * display controller - */ - -static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -struct omap_hwmod_class omap2_dispc_hwmod_class = { - .name = "dispc", - .sysc = &omap2_dispc_sysc, -}; - -/* * 'rfbi' class * remote frame buffer interface */ diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 177dee20faef..2a6729741b06 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -28,6 +28,28 @@ struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = { { .name = "dispc", .dma_req = 5 }, { .dma_req = -1 } }; + +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap2_dispc_sysc, +}; + /* OMAP2xxx Timer Common */ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = { .rev_offs = 0x0000, diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 5324e8d93bc0..3c8dd928628e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1480,6 +1480,28 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = { .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), }; +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSC_HAS_ENAWAKEUP), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap3_dispc_sysc, +}; + /* l4_core -> dss_dispc */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = { .master = &omap3xxx_l4_core_hwmod, @@ -1503,7 +1525,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = { static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { .name = "dss_dispc", - .class = &omap2_dispc_hwmod_class, + .class = &omap3_dispc_hwmod_class, .mpu_irqs = omap2_dispc_irqs, .main_clk = "dss1_alwon_fck", .prcm = { @@ -3523,12 +3545,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_uart2_hwmod, &omap3xxx_uart3_hwmod, - /* dss class */ - &omap3xxx_dss_dispc_hwmod, - &omap3xxx_dss_dsi1_hwmod, - &omap3xxx_dss_rfbi_hwmod, - &omap3xxx_dss_venc_hwmod, - /* i2c class */ &omap3xxx_i2c1_hwmod, &omap3xxx_i2c2_hwmod, @@ -3635,6 +3651,15 @@ static __initdata struct omap_hwmod *am35xx_hwmods[] = { NULL }; +static __initdata struct omap_hwmod *omap3xxx_dss_hwmods[] = { + /* dss class */ + &omap3xxx_dss_dispc_hwmod, + &omap3xxx_dss_dsi1_hwmod, + &omap3xxx_dss_rfbi_hwmod, + &omap3xxx_dss_venc_hwmod, + NULL +}; + int __init omap3xxx_hwmod_init(void) { int r; @@ -3708,6 +3733,21 @@ int __init omap3xxx_hwmod_init(void) if (h) r = omap_hwmod_register(h); + if (r < 0) + return r; + + /* + * DSS code presumes that dss_core hwmod is handled first, + * _before_ any other DSS related hwmods so register common + * DSS hwmods last to ensure that dss_core is already registered. + * Otherwise some change things may happen, for ex. if dispc + * is handled before dss_core and DSS is enabled in bootloader + * DIPSC will be reset with outputs enabled which sometimes leads + * to unrecoverable L3 error. + * XXX The long-term fix to this is to ensure modules are set up + * in dependency order in the hwmod core code. + */ + r = omap_hwmod_register(omap3xxx_dss_hwmods); return r; } diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index f9f151081760..ef0524c10a84 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1031,6 +1031,7 @@ static struct omap_hwmod_dma_info omap44xx_dmic_sdma_reqs[] = { static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = { { + .name = "mpu", .pa_start = 0x4012e000, .pa_end = 0x4012e07f, .flags = ADDR_TYPE_RT @@ -1049,6 +1050,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = { static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = { { + .name = "dma", .pa_start = 0x4902e000, .pa_end = 0x4902e07f, .flags = ADDR_TYPE_RT diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index b8822f8b2891..23de98d03841 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -82,13 +82,7 @@ static int omap2_fclks_active(void) f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); - /* Ignore UART clocks. These are handled by UART core (serial.c) */ - f1 &= ~(OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_UART2_MASK); - f2 &= ~OMAP24XX_EN_UART3_MASK; - - if (f1 | f2) - return 1; - return 0; + return (f1 | f2) ? 1 : 0; } static void omap2_enter_full_retention(void) diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index c1c4d86a79a8..9ce765407ad5 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -19,6 +19,7 @@ #include "common.h" #include <plat/cpu.h> #include <plat/prcm.h> +#include <plat/irqs.h> #include "vp.h" diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 33dd655e6aab..a1d6154dc120 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -19,6 +19,7 @@ #include "common.h" #include <plat/cpu.h> +#include <plat/irqs.h> #include <plat/prcm.h> #include "vp.h" diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 247d89478f24..f590afc1f673 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -107,18 +107,18 @@ static void omap_uart_set_noidle(struct platform_device *pdev) omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); } -static void omap_uart_set_forceidle(struct platform_device *pdev) +static void omap_uart_set_smartidle(struct platform_device *pdev) { struct omap_device *od = to_omap_device(pdev); - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_FORCE); + omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART); } #else static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) {} static void omap_uart_set_noidle(struct platform_device *pdev) {} -static void omap_uart_set_forceidle(struct platform_device *pdev) {} +static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX @@ -349,7 +349,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; omap_up.flags = UPF_BOOT_AUTOCONF; omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; - omap_up.set_forceidle = omap_uart_set_forceidle; + omap_up.set_forceidle = omap_uart_set_smartidle; omap_up.set_noidle = omap_uart_set_noidle; omap_up.enable_wakeup = omap_uart_enable_wakeup; omap_up.dma_rx_buf_size = info->dma_rx_buf_size; diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 9dd93453e563..7e755bb0ffc4 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -897,7 +897,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) ret = sr_late_init(sr_info); if (ret) { pr_warning("%s: Error in SR late init\n", __func__); - return ret; + goto err_iounmap; } } diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 6eeff0e0ae01..5c9acea95761 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -270,7 +270,7 @@ static struct clocksource clocksource_gpt = { static u32 notrace dmtimer_read_sched_clock(void) { if (clksrc.reserved) - return __omap_dm_timer_read_counter(clksrc.io_base, 1); + return __omap_dm_timer_read_counter(&clksrc, 1); return 0; } diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 031d116fbf10..175b7d86d86a 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -247,7 +247,7 @@ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) * omap_vc_i2c_init - initialize I2C interface to PMIC * @voltdm: voltage domain containing VC data * - * Use PMIC supplied seetings for I2C high-speed mode and + * Use PMIC supplied settings for I2C high-speed mode and * master code (if set) and program the VC I2C configuration * register. * @@ -265,8 +265,8 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm) if (initialized) { if (voltdm->pmic->i2c_high_speed != i2c_high_speed) - pr_warn("%s: I2C config for all channels must match.", - __func__); + pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).", + __func__, voltdm->name, i2c_high_speed); return; } @@ -292,9 +292,7 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) u32 val; if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) { - pr_err("%s: PMIC info requried to configure vc for" - "vdd_%s not populated.Hence cannot initialize vc\n", - __func__, voltdm->name); + pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name); return; } diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index c005e2f5e383..57db2038b23c 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -108,6 +108,7 @@ void __init omap3xxx_voltagedomains_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ +#ifdef CONFIG_PM_OPP if (cpu_is_omap3630()) { omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data; omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data; @@ -115,6 +116,7 @@ void __init omap3xxx_voltagedomains_init(void) omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data; omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data; } +#endif if (cpu_is_omap3517() || cpu_is_omap3505()) voltdms = voltagedomains_am35xx; diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index 4e11d022595d..c3115f6853d4 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -100,9 +100,11 @@ void __init omap44xx_voltagedomains_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ +#ifdef CONFIG_PM_OPP omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data; omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data; omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data; +#endif for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++) voltdm->sys_clk.name = sys_clk_name; diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index 807391d84a9d..0df88820978d 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -41,6 +41,11 @@ void __init omap_vp_init(struct voltagedomain *voltdm) u32 val, sys_clk_rate, timeout, waittime; u32 vddmin, vddmax, vstepmin, vstepmax; + if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) { + pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name); + return; + } + if (!voltdm->read || !voltdm->write) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", __func__, voltdm->name); diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 0e28bae20bd4..5dad38ec00ea 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -29,6 +29,7 @@ #include <mach/hardware.h> #include <mach/orion5x.h> #include <plat/orion_nand.h> +#include <plat/ehci-orion.h> #include <plat/time.h> #include <plat/common.h> #include <plat/addr-map.h> @@ -72,7 +73,8 @@ void __init orion5x_map_io(void) ****************************************************************************/ void __init orion5x_ehci0_init(void) { - orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL); + orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL, + EHCI_PHY_ORION); } diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 18fd177073f4..5bc13121eac5 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -415,29 +415,9 @@ static struct resource pxa_rtc_resources[] = { }, }; -static struct resource sa1100_rtc_resources[] = { - [0] = { - .start = 0x40900000, - .end = 0x409000ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_RTC1Hz, - .end = IRQ_RTC1Hz, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_RTCAlrm, - .end = IRQ_RTCAlrm, - .flags = IORESOURCE_IRQ, - }, -}; - struct platform_device sa1100_device_rtc = { .name = "sa1100-rtc", .id = -1, - .num_resources = ARRAY_SIZE(sa1100_rtc_resources), - .resource = sa1100_rtc_resources, }; struct platform_device pxa_device_rtc = { diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index adf058fa97ee..91e4f6c03766 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -209,8 +209,6 @@ static struct clk_lookup pxa25x_clkregs[] = { INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"), INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"), INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL), - INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static struct clk_lookup pxa25x_hwuart_clkreg = diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 180bd8675d4b..aed6cbcf3866 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -230,8 +230,6 @@ static struct clk_lookup pxa27x_clkregs[] = { INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"), INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), - INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index 0388eda7878a..40bb16501d86 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c @@ -89,7 +89,6 @@ static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0); static struct clk_lookup common_clkregs[] = { INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0); diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index d487e1ff4c9a..8d614ecd8e99 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -83,7 +83,6 @@ static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0); static struct clk_lookup pxa320_clkregs[] = { INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static int __init pxa320_init(void) diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index f107c71c7589..4f402afa6609 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -67,7 +67,6 @@ static struct clk_lookup pxa3xx_clkregs[] = { INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"), /* Power I2C clock is always on */ INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL), INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"), INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"), diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index fccc644702e6..d082a583df78 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -217,7 +217,6 @@ static struct clk_lookup pxa95x_clkregs[] = { INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"), /* Power I2C clock is always on */ INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL), INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL), INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL), diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c index ac1aed2a8da4..eb55f05bef3a 100644 --- a/arch/arm/mach-realview/hotplug.c +++ b/arch/arm/mach-realview/hotplug.c @@ -13,6 +13,7 @@ #include <linux/smp.h> #include <asm/cacheflush.h> +#include <asm/smp_plat.h> extern volatile int pen_release; diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h index 794a8d91a6a6..124bce6b4d7b 100644 --- a/arch/arm/mach-realview/include/mach/board-eb.h +++ b/arch/arm/mach-realview/include/mach/board-eb.h @@ -47,21 +47,23 @@ #define REALVIEW_EB_USB_BASE 0x4F000000 /* USB */ #ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB -#define REALVIEW_EB11MP_SCU_BASE 0x10100000 /* SCU registers */ -#define REALVIEW_EB11MP_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB11MP_TWD_BASE 0x10100600 -#define REALVIEW_EB11MP_GIC_DIST_BASE 0x10101000 /* Generic interrupt controller distributor */ +#define REALVIEW_EB11MP_PRIV_MEM_BASE 0x1F000000 #define REALVIEW_EB11MP_L220_BASE 0x10102000 /* L220 registers */ #define REALVIEW_EB11MP_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */ #else -#define REALVIEW_EB11MP_SCU_BASE 0x1F000000 /* SCU registers */ -#define REALVIEW_EB11MP_GIC_CPU_BASE 0x1F000100 /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB11MP_TWD_BASE 0x1F000600 -#define REALVIEW_EB11MP_GIC_DIST_BASE 0x1F001000 /* Generic interrupt controller distributor */ +#define REALVIEW_EB11MP_PRIV_MEM_BASE 0x1F000000 #define REALVIEW_EB11MP_L220_BASE 0x1F002000 /* L220 registers */ #define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */ #endif +#define REALVIEW_EB11MP_PRIV_MEM_SIZE SZ_8K +#define REALVIEW_EB11MP_PRIV_MEM_OFF(x) (REALVIEW_EB11MP_PRIV_MEM_BASE + (x)) + +#define REALVIEW_EB11MP_SCU_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0) /* SCU registers */ +#define REALVIEW_EB11MP_GIC_CPU_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x0100) /* Generic interrupt controller CPU interface */ +#define REALVIEW_EB11MP_TWD_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x0600) +#define REALVIEW_EB11MP_GIC_DIST_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x1000) /* Generic interrupt controller distributor */ + /* * Core tile identification (REALVIEW_SYS_PROCID) */ diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h index 7abf918b77e9..aa2d4e02ea2c 100644 --- a/arch/arm/mach-realview/include/mach/board-pb11mp.h +++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h @@ -75,6 +75,8 @@ /* * Testchip peripheral and fpga gic regions */ +#define REALVIEW_TC11MP_PRIV_MEM_BASE 0x1F000000 +#define REALVIEW_TC11MP_PRIV_MEM_SIZE SZ_8K #define REALVIEW_TC11MP_SCU_BASE 0x1F000000 /* IRQ, Test chip */ #define REALVIEW_TC11MP_GIC_CPU_BASE 0x1F000100 /* Test chip interrupt controller CPU interface */ #define REALVIEW_TC11MP_TWD_BASE 0x1F000600 diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index e62962117763..9578145f2df0 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -91,14 +91,9 @@ static struct map_desc realview_eb_io_desc[] __initdata = { static struct map_desc realview_eb11mp_io_desc[] __initdata = { { - .virtual = IO_ADDRESS(REALVIEW_EB11MP_SCU_BASE), - .pfn = __phys_to_pfn(REALVIEW_EB11MP_SCU_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_EB11MP_GIC_DIST_BASE), - .pfn = __phys_to_pfn(REALVIEW_EB11MP_GIC_DIST_BASE), - .length = SZ_4K, + .virtual = IO_ADDRESS(REALVIEW_EB11MP_PRIV_MEM_BASE), + .pfn = __phys_to_pfn(REALVIEW_EB11MP_PRIV_MEM_BASE), + .length = REALVIEW_EB11MP_PRIV_MEM_SIZE, .type = MT_DEVICE, }, { .virtual = IO_ADDRESS(REALVIEW_EB11MP_L220_BASE), diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 127a3fd42ab1..2147335f66f5 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -64,15 +64,10 @@ static struct map_desc realview_pb11mp_io_desc[] __initdata = { .pfn = __phys_to_pfn(REALVIEW_PB11MP_GIC_DIST_BASE), .length = SZ_4K, .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_TC11MP_GIC_CPU_BASE), - .pfn = __phys_to_pfn(REALVIEW_TC11MP_GIC_CPU_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_TC11MP_GIC_DIST_BASE), - .pfn = __phys_to_pfn(REALVIEW_TC11MP_GIC_DIST_BASE), - .length = SZ_4K, + }, { /* Maps the SCU, GIC CPU interface, TWD, GIC DIST */ + .virtual = IO_ADDRESS(REALVIEW_TC11MP_PRIV_MEM_BASE), + .pfn = __phys_to_pfn(REALVIEW_TC11MP_PRIV_MEM_BASE), + .length = REALVIEW_TC11MP_PRIV_MEM_SIZE, .type = MT_DEVICE, }, { .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c index 7dc6c46b5e2b..5404535da1a5 100644 --- a/arch/arm/mach-s3c2410/cpu-freq.c +++ b/arch/arm/mach-s3c2410/cpu-freq.c @@ -115,7 +115,8 @@ static struct s3c_cpufreq_info s3c2410_cpufreq_info = { .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), }; -static int s3c2410_cpufreq_add(struct device *dev) +static int s3c2410_cpufreq_add(struct device *dev, + struct subsys_interface *sif) { return s3c_cpufreq_register(&s3c2410_cpufreq_info); } @@ -133,7 +134,8 @@ static int __init s3c2410_cpufreq_init(void) arch_initcall(s3c2410_cpufreq_init); -static int s3c2410a_cpufreq_add(struct device *dev) +static int s3c2410a_cpufreq_add(struct device *dev, + struct subsys_interface *sif) { /* alter the maximum freq settings for S3C2410A. If a board knows * it only has a maximum of 200, then it should register its own @@ -144,7 +146,7 @@ static int s3c2410a_cpufreq_add(struct device *dev) s3c2410_cpufreq_info.max.pclk = 66500000; s3c2410_cpufreq_info.name = "s3c2410a"; - return s3c2410_cpufreq_add(dev); + return s3c2410_cpufreq_add(dev, sif); } static struct subsys_interface s3c2410a_cpufreq_interface = { diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 2afd00014a77..4803338cf56e 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -132,7 +132,8 @@ static struct s3c24xx_dma_order __initdata s3c2410_dma_order = { }, }; -static int __init s3c2410_dma_add(struct device *dev) +static int __init s3c2410_dma_add(struct device *dev, + struct subsys_interface *sif) { s3c2410_dma_init(); s3c24xx_dma_order_set(&s3c2410_dma_order); @@ -148,7 +149,7 @@ static struct subsys_interface s3c2410_dma_interface = { static int __init s3c2410_dma_drvinit(void) { - return subsys_interface_register(&s3c2410_interface); + return subsys_interface_register(&s3c2410_dma_interface); } arch_initcall(s3c2410_dma_drvinit); diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c index c07438bfc99f..e0b3b347da82 100644 --- a/arch/arm/mach-s3c2410/pll.c +++ b/arch/arm/mach-s3c2410/pll.c @@ -66,7 +66,7 @@ static struct cpufreq_frequency_table pll_vals_12MHz[] = { { .frequency = 270000000, .index = PLLVAL(127, 1, 1), }, }; -static int s3c2410_plls_add(struct device *dev) +static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif) { return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz)); } diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index fda5385deff6..03f706dd6009 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -111,7 +111,7 @@ struct syscore_ops s3c2410_pm_syscore_ops = { .resume = s3c2410_pm_resume, }; -static int s3c2410_pm_add(struct device *dev) +static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s3c2410_pm_prepare; pm_cpu_sleep = s3c2410_cpu_suspend; diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c index d8664b7652ce..125be7d5fa60 100644 --- a/arch/arm/mach-s3c2412/cpu-freq.c +++ b/arch/arm/mach-s3c2412/cpu-freq.c @@ -194,7 +194,8 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = { .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs), }; -static int s3c2412_cpufreq_add(struct device *dev) +static int s3c2412_cpufreq_add(struct device *dev, + struct subsys_interface *sif) { unsigned long fclk_rate; diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index 142acd3b5e15..38472ac920ff 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -159,7 +159,8 @@ static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = { .map_size = ARRAY_SIZE(s3c2412_dma_mappings), }; -static int __init s3c2412_dma_add(struct device *dev) +static int __init s3c2412_dma_add(struct device *dev, + struct subsys_interface *sif) { s3c2410_dma_init(); return s3c24xx_dma_init_map(&s3c2412_dma_sel); diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c index a8a46c1644f4..e65619ddbccc 100644 --- a/arch/arm/mach-s3c2412/irq.c +++ b/arch/arm/mach-s3c2412/irq.c @@ -170,7 +170,7 @@ static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state) static struct irq_chip s3c2412_irq_rtc_chip; -static int s3c2412_irq_add(struct device *dev) +static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif) { unsigned int irqno; diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index d1adfa65f66d..d04588506ec4 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -56,7 +56,7 @@ static void s3c2412_pm_prepare(void) { } -static int s3c2412_pm_add(struct device *dev) +static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s3c2412_pm_prepare; pm_cpu_sleep = s3c2412_cpu_suspend; diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c index 36df761061de..fd49f35e448e 100644 --- a/arch/arm/mach-s3c2416/irq.c +++ b/arch/arm/mach-s3c2416/irq.c @@ -213,7 +213,8 @@ static int __init s3c2416_add_sub(unsigned int base, return 0; } -static int __init s3c2416_irq_add(struct device *dev) +static int __init s3c2416_irq_add(struct device *dev, + struct subsys_interface *sif) { printk(KERN_INFO "S3C2416: IRQ Support\n"); diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c index 3bdb15a0d419..1bd4817b8eb8 100644 --- a/arch/arm/mach-s3c2416/pm.c +++ b/arch/arm/mach-s3c2416/pm.c @@ -48,7 +48,7 @@ static void s3c2416_pm_prepare(void) __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1); } -static int s3c2416_pm_add(struct device *dev) +static int s3c2416_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s3c2416_pm_prepare; pm_cpu_sleep = s3c2416_cpu_suspend; diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c index bedbc87a3426..414364eb426c 100644 --- a/arch/arm/mach-s3c2440/clock.c +++ b/arch/arm/mach-s3c2440/clock.c @@ -149,7 +149,7 @@ static struct clk_lookup s3c2440_clk_lookup[] = { CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), }; -static int s3c2440_clk_add(struct device *dev) +static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) { struct clk *clock_upll; struct clk *clock_h; diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index 15b1ddf8f626..5f0a0c8ef84f 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -174,7 +174,8 @@ static struct s3c24xx_dma_order __initdata s3c2440_dma_order = { }, }; -static int __init s3c2440_dma_add(struct device *dev) +static int __init s3c2440_dma_add(struct device *dev, + struct subsys_interface *sif) { s3c2410_dma_init(); s3c24xx_dma_order_set(&s3c2440_dma_order); diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c index 4fee9bc6bcb5..4a18cde439cc 100644 --- a/arch/arm/mach-s3c2440/irq.c +++ b/arch/arm/mach-s3c2440/irq.c @@ -92,7 +92,7 @@ static struct irq_chip s3c_irq_wdtac97 = { .irq_ack = s3c_irq_wdtac97_ack, }; -static int s3c2440_irq_add(struct device *dev) +static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif) { unsigned int irqno; diff --git a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c index cf7596694efe..61776764d9f4 100644 --- a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c +++ b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c @@ -270,7 +270,8 @@ struct s3c_cpufreq_info s3c2440_cpufreq_info = { .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), }; -static int s3c2440_cpufreq_add(struct device *dev) +static int s3c2440_cpufreq_add(struct device *dev, + struct subsys_interface *sif) { xtal = s3c_cpufreq_clk_get(NULL, "xtal"); hclk = s3c_cpufreq_clk_get(NULL, "hclk"); diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c index b5368ae8d7fe..551fb433be87 100644 --- a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c +++ b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c @@ -51,7 +51,7 @@ static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = { { .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */ }; -static int s3c2440_plls12_add(struct device *dev) +static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif) { struct clk *xtal_clk; unsigned long xtal; diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c index 42f2b5cd2399..3f15bcf64290 100644 --- a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c +++ b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c @@ -79,7 +79,8 @@ static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = { { .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */ }; -static int s3c2440_plls169344_add(struct device *dev) +static int s3c2440_plls169344_add(struct device *dev, + struct subsys_interface *sif) { struct clk *xtal_clk; unsigned long xtal; diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c index 8004e0497bf4..22cb7c94a8c8 100644 --- a/arch/arm/mach-s3c2440/s3c2442.c +++ b/arch/arm/mach-s3c2440/s3c2442.c @@ -122,7 +122,7 @@ static struct clk s3c2442_clk_cam_upll = { }, }; -static int s3c2442_clk_add(struct device *dev) +static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif) { struct clk *clock_upll; struct clk *clock_h; diff --git a/arch/arm/mach-s3c2440/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c index b3fdbdda3d5f..6d9b688c442b 100644 --- a/arch/arm/mach-s3c2440/s3c244x-clock.c +++ b/arch/arm/mach-s3c2440/s3c244x-clock.c @@ -72,7 +72,7 @@ static struct clk clk_arm = { }, }; -static int s3c244x_clk_add(struct device *dev) +static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif) { unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); unsigned long clkdivn; diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c index 74d3dcf46a48..5fe8e58d3afd 100644 --- a/arch/arm/mach-s3c2440/s3c244x-irq.c +++ b/arch/arm/mach-s3c2440/s3c244x-irq.c @@ -91,7 +91,7 @@ static struct irq_chip s3c_irq_cam = { .irq_ack = s3c_irq_cam_ack, }; -static int s3c244x_irq_add(struct device *dev) +static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif) { unsigned int irqno; diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index de6b4a23c9ed..14224517e621 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -135,7 +135,8 @@ static struct s3c24xx_dma_selection __initdata s3c2443_dma_sel = { .map_size = ARRAY_SIZE(s3c2443_dma_mappings), }; -static int __init s3c2443_dma_add(struct device *dev) +static int __init s3c2443_dma_add(struct device *dev, + struct subsys_interface *sif) { s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100); return s3c24xx_dma_init_map(&s3c2443_dma_sel); diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c index 35e4ff24fb43..ac2829f56d12 100644 --- a/arch/arm/mach-s3c2443/irq.c +++ b/arch/arm/mach-s3c2443/irq.c @@ -241,7 +241,8 @@ static int __init s3c2443_add_sub(unsigned int base, return 0; } -static int __init s3c2443_irq_add(struct device *dev) +static int __init s3c2443_irq_add(struct device *dev, + struct subsys_interface *sif) { printk("S3C2443: IRQ Support\n"); diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 31bb27dc4aeb..aebbcc291b4e 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -138,6 +138,11 @@ static struct clk init_clocks_off[] = { .ctrlbit = S3C_CLKCON_PCLK_TSADC, }, { .name = "i2c", +#ifdef CONFIG_S3C_DEV_I2C1 + .devname = "s3c2440-i2c.0", +#else + .devname = "s3c2440-i2c", +#endif .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_IIC, diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 4a7394d4bd9e..bee7dcd4df7c 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -49,7 +49,7 @@ /* uart registration process */ -void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) +static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) { s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no); } diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c index 23f9b22439c9..9cba18bfe47b 100644 --- a/arch/arm/mach-s5p64x0/pm.c +++ b/arch/arm/mach-s5p64x0/pm.c @@ -160,7 +160,7 @@ static void s5p64x0_pm_prepare(void) } -static int s5p64x0_pm_add(struct device *dev) +static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s5p64x0_pm_prepare; pm_cpu_sleep = s5p64x0_cpu_suspend; diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index c78dfddd77fd..b9ec0c35379f 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -175,7 +175,7 @@ static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable); } -static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable) +static int s5pv210_clk_hdmiphy_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); } @@ -372,7 +372,7 @@ static struct clk init_clocks_off[] = { }, { .name = "hdmiphy", .devname = "s5pv210-hdmi", - .enable = exynos4_clk_hdmiphy_ctrl, + .enable = s5pv210_clk_hdmiphy_ctrl, .ctrlbit = (1 << 0), }, { .name = "dacphy", diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 677c71c41e50..736bfb103cbc 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -133,7 +133,7 @@ static void s5pv210_pm_prepare(void) s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); } -static int s5pv210_pm_add(struct device *dev) +static int s5pv210_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s5pv210_pm_prepare; pm_cpu_sleep = s5pv210_cpu_suspend; diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index ebafe8aa8956..0c4b76ab4d8e 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -202,7 +202,6 @@ static struct irda_platform_data assabet_irda_data = { static struct mcp_plat_data assabet_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .codec = "ucb1x00", }; static void __init assabet_init(void) @@ -253,17 +252,6 @@ static void __init assabet_init(void) sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources, ARRAY_SIZE(assabet_flash_resources)); sa11x0_register_irda(&assabet_irda_data); - - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - - ASSABET_BCR_set(ASSABET_BCR_CODEC_RST); sa11x0_register_mcp(&assabet_mcp_data); } diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index d12d0f48b1dc..11bb6d0b9be3 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -124,23 +124,12 @@ static void __init cerf_map_io(void) static struct mcp_plat_data cerf_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .codec = "ucb1x00", }; static void __init cerf_init(void) { platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices)); sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1); - - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - sa11x0_register_mcp(&cerf_mcp_data); } diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c index d6df9f6c9f7e..dab3c6347a8f 100644 --- a/arch/arm/mach-sa1100/clock.c +++ b/arch/arm/mach-sa1100/clock.c @@ -11,39 +11,17 @@ #include <linux/clk.h> #include <linux/spinlock.h> #include <linux/mutex.h> -#include <linux/io.h> -#include <linux/clkdev.h> #include <mach/hardware.h> -struct clkops { - void (*enable)(struct clk *); - void (*disable)(struct clk *); - unsigned long (*getrate)(struct clk *); -}; - +/* + * Very simple clock implementation - we only have one clock to deal with. + */ struct clk { - const struct clkops *ops; - unsigned long rate; unsigned int enabled; }; -#define INIT_CLKREG(_clk, _devname, _conname) \ - { \ - .clk = _clk, \ - .dev_id = _devname, \ - .con_id = _conname, \ - } - -#define DEFINE_CLK(_name, _ops, _rate) \ -struct clk clk_##_name = { \ - .ops = _ops, \ - .rate = _rate, \ - } - -static DEFINE_SPINLOCK(clocks_lock); - -static void clk_gpio27_enable(struct clk *clk) +static void clk_gpio27_enable(void) { /* * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111: @@ -54,22 +32,38 @@ static void clk_gpio27_enable(struct clk *clk) TUCR = TUCR_3_6864MHz; } -static void clk_gpio27_disable(struct clk *clk) +static void clk_gpio27_disable(void) { TUCR = 0; GPDR &= ~GPIO_32_768kHz; GAFR &= ~GPIO_32_768kHz; } +static struct clk clk_gpio27; + +static DEFINE_SPINLOCK(clocks_lock); + +struct clk *clk_get(struct device *dev, const char *id) +{ + const char *devname = dev_name(dev); + + return strcmp(devname, "sa1111.0") ? ERR_PTR(-ENOENT) : &clk_gpio27; +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); + int clk_enable(struct clk *clk) { unsigned long flags; spin_lock_irqsave(&clocks_lock, flags); if (clk->enabled++ == 0) - clk->ops->enable(clk); + clk_gpio27_enable(); spin_unlock_irqrestore(&clocks_lock, flags); - return 0; } EXPORT_SYMBOL(clk_enable); @@ -82,48 +76,13 @@ void clk_disable(struct clk *clk) spin_lock_irqsave(&clocks_lock, flags); if (--clk->enabled == 0) - clk->ops->disable(clk); + clk_gpio27_disable(); spin_unlock_irqrestore(&clocks_lock, flags); } EXPORT_SYMBOL(clk_disable); unsigned long clk_get_rate(struct clk *clk) { - unsigned long rate; - - rate = clk->rate; - if (clk->ops->getrate) - rate = clk->ops->getrate(clk); - - return rate; + return 3686400; } EXPORT_SYMBOL(clk_get_rate); - -const struct clkops clk_gpio27_ops = { - .enable = clk_gpio27_enable, - .disable = clk_gpio27_disable, -}; - -static void clk_dummy_enable(struct clk *clk) { } -static void clk_dummy_disable(struct clk *clk) { } - -const struct clkops clk_dummy_ops = { - .enable = clk_dummy_enable, - .disable = clk_dummy_disable, -}; - -static DEFINE_CLK(gpio27, &clk_gpio27_ops, 3686400); -static DEFINE_CLK(dummy, &clk_dummy_ops, 0); - -static struct clk_lookup sa11xx_clkregs[] = { - INIT_CLKREG(&clk_gpio27, "sa1111.0", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), -}; - -static int __init sa11xx_clk_init(void) -{ - clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs)); - return 0; -} - -postcore_initcall(sa11xx_clk_init); diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index c483912d08af..fd5652118ed1 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -27,7 +27,6 @@ #include <linux/timer.h> #include <linux/gpio.h> #include <linux/pda_power.h> -#include <linux/mfd/ucb1x00.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -86,15 +85,10 @@ static struct scoop_pcmcia_config collie_pcmcia_config = { .num_devs = 1, }; -static struct ucb1x00_plat_data collie_ucb1x00_data = { - .gpio_base = COLLIE_TC35143_GPIO_BASE, -}; - static struct mcp_plat_data collie_mcp_data = { .mccr0 = MCCR0_ADM | MCCR0_ExtClk, .sclk_rate = 9216000, - .codec = "ucb1x00", - .codec_pdata = &collie_ucb1x00_data, + .gpio_base = COLLIE_TC35143_GPIO_BASE, }; /* @@ -144,8 +138,6 @@ static struct pda_power_pdata collie_power_data = { static struct resource collie_power_resource[] = { { .name = "ac", - .start = gpio_to_irq(COLLIE_GPIO_AC_IN), - .end = gpio_to_irq(COLLIE_GPIO_AC_IN), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, @@ -347,7 +339,8 @@ static void __init collie_init(void) GPSR |= _COLLIE_GPIO_UCB1x00_RESET; - + collie_power_resource[0].start = gpio_to_irq(COLLIE_GPIO_AC_IN); + collie_power_resource[0].end = gpio_to_irq(COLLIE_GPIO_AC_IN); platform_scoop_config = &collie_pcmcia_config; ret = platform_add_devices(devices, ARRAY_SIZE(devices)); @@ -357,16 +350,6 @@ static void __init collie_init(void) sa11x0_register_mtd(&collie_flash_data, collie_flash_resources, ARRAY_SIZE(collie_flash_resources)); - - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - sa11x0_register_mcp(&collie_mcp_data); sharpsl_save_param(); diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c index aaa8acf76b7b..19b2053f5af4 100644 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ b/arch/arm/mach-sa1100/cpu-sa1100.c @@ -228,7 +228,7 @@ static int __init sa1100_cpu_init(struct cpufreq_policy *policy) return 0; } -static struct cpufreq_driver sa1100_driver = { +static struct cpufreq_driver sa1100_driver __refdata = { .flags = CPUFREQ_STICKY, .verify = sa11x0_verify_speed, .target = sa1100_target, diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index e3a28ca2a7b7..bb10ee2cb89f 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -217,15 +217,10 @@ static struct platform_device sa11x0uart3_device = { static struct resource sa11x0mcp_resources[] = { [0] = { .start = __PREG(Ser4MCCR0), - .end = __PREG(Ser4MCCR0) + 0x1C - 1, + .end = __PREG(Ser4MCCR0) + 0xffff, .flags = IORESOURCE_MEM, }, [1] = { - .start = __PREG(Ser4MCCR1), - .end = __PREG(Ser4MCCR1) + 0x4 - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { .start = IRQ_Ser4MCP, .end = IRQ_Ser4MCP, .flags = IORESOURCE_IRQ, @@ -350,29 +345,9 @@ void sa11x0_register_irda(struct irda_platform_data *irda) sa11x0_register_device(&sa11x0ir_device, irda); } -static struct resource sa11x0rtc_resources[] = { - [0] = { - .start = 0x90010000, - .end = 0x900100ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_RTC1Hz, - .end = IRQ_RTC1Hz, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_RTCAlrm, - .end = IRQ_RTCAlrm, - .flags = IORESOURCE_IRQ, - }, -}; - static struct platform_device sa11x0rtc_device = { .name = "sa1100-rtc", .id = -1, - .resource = sa11x0rtc_resources, - .num_resources = ARRAY_SIZE(sa11x0rtc_resources), }; static struct platform_device *sa11x0_devices[] __initdata = { diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h index 586cec898b35..ed1a331508a7 100644 --- a/arch/arm/mach-sa1100/include/mach/mcp.h +++ b/arch/arm/mach-sa1100/include/mach/mcp.h @@ -17,8 +17,6 @@ struct mcp_plat_data { u32 mccr1; unsigned int sclk_rate; int gpio_base; - const char *codec; - void *codec_pdata; }; #endif diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index f50b00bd18a0..b412fc09c80c 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -198,3 +198,5 @@ static int __init jornada_ssp_init(void) { return platform_driver_register(&jornadassp_driver); } + +module_init(jornada_ssp_init); diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index d117ceab6215..af4e2761f3db 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -24,20 +24,10 @@ static struct mcp_plat_data lart_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .codec = "ucb1x00", }; static void __init lart_init(void) { - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - sa11x0_register_mcp(&lart_mcp_data); } diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index 748d34435b3f..318b2b766a0b 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -55,22 +55,11 @@ static struct resource shannon_flash_resource = { static struct mcp_plat_data shannon_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .codec = "ucb1x00", }; static void __init shannon_init(void) { sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1); - - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - sa11x0_register_mcp(&shannon_mcp_data); } diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 458ececefa58..e17c04d6e324 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -14,7 +14,6 @@ #include <linux/mtd/partitions.h> #include <linux/io.h> #include <linux/gpio.h> -#include <linux/mfd/ucb1x00.h> #include <asm/irq.h> #include <mach/hardware.h> @@ -188,15 +187,10 @@ static struct resource simpad_flash_resources [] = { } }; -static struct ucb1x00_plat_data simpad_ucb1x00_data = { - .gpio_base = SIMPAD_UCB1X00_GPIO_BASE, -}; - static struct mcp_plat_data simpad_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .codec = "ucb1300", - .codec_pdata = &simpad_ucb1x00_data, + .gpio_base = SIMPAD_UCB1X00_GPIO_BASE, }; @@ -384,16 +378,6 @@ static int __init simpad_init(void) sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources, ARRAY_SIZE(simpad_flash_resources)); - - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - sa11x0_register_mcp(&simpad_mcp_data); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 6fcf304d3cdf..a83cf51fc099 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -662,6 +662,7 @@ static struct sh_dmae_pdata usb_dma0_platform_data = { .dmaor_is_32bit = 1, .needs_tend_set = 1, .no_dmars = 1, + .slave_only = 1, }; static struct resource sh7372_usb_dmae0_resources[] = { @@ -723,6 +724,7 @@ static struct sh_dmae_pdata usb_dma1_platform_data = { .dmaor_is_32bit = 1, .needs_tend_set = 1, .no_dmars = 1, + .slave_only = 1, }; static struct resource sh7372_usb_dmae1_resources[] = { diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index cc97ef892d1b..4fe2e9eaf501 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -25,6 +25,7 @@ #include <linux/delay.h> #include <mach/common.h> #include <mach/r8a7779.h> +#include <asm/smp_plat.h> #include <asm/smp_scu.h> #include <asm/smp_twd.h> #include <asm/hardware/gic.h> diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index be1ade76ccc8..0d159d64a345 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -23,6 +23,7 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <mach/common.h> +#include <asm/smp_plat.h> #include <asm/smp_scu.h> #include <asm/smp_twd.h> #include <asm/hardware/gic.h> diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index fcf4f377b1dc..330afdfa2475 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -60,9 +60,9 @@ static struct plat_serial8250_port debug_uart_platform_data[] = { .uartclk = 216000000, }, { /* serial port on mini-pcie */ - .membase = IO_ADDRESS(TEGRA_UARTD_BASE), - .mapbase = TEGRA_UARTD_BASE, - .irq = INT_UARTD, + .membase = IO_ADDRESS(TEGRA_UARTC_BASE), + .mapbase = TEGRA_UARTC_BASE, + .irq = INT_UARTC, .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, .type = PORT_TEGRA, .iotype = UPIO_MEM, @@ -174,7 +174,7 @@ static void __init tegra_paz00_fixup(struct tag *tags, char **cmdline, static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = { /* name parent rate enabled */ { "uarta", "pll_p", 216000000, true }, - { "uartd", "pll_p", 216000000, true }, + { "uartc", "pll_p", 216000000, true }, { "pll_p_out4", "pll_p", 24000000, true }, { "usbd", "clk_m", 12000000, false }, diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h index ffa83f580db6..3c9f8da37ea3 100644 --- a/arch/arm/mach-tegra/board-paz00.h +++ b/arch/arm/mach-tegra/board-paz00.h @@ -22,7 +22,7 @@ /* SDCARD */ #define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5 #define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1 -#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3 +#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PV1 /* ULPI */ #define TEGRA_ULPI_RST TEGRA_GPIO_PV0 diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h index d0132e8031a1..3c9339058bec 100644 --- a/arch/arm/mach-tegra/include/mach/dma.h +++ b/arch/arm/mach-tegra/include/mach/dma.h @@ -23,11 +23,6 @@ #include <linux/list.h> -#if defined(CONFIG_TEGRA_SYSTEM_DMA) - -struct tegra_dma_req; -struct tegra_dma_channel; - #define TEGRA_DMA_REQ_SEL_CNTR 0 #define TEGRA_DMA_REQ_SEL_I2S_2 1 #define TEGRA_DMA_REQ_SEL_I2S_1 2 @@ -56,6 +51,11 @@ struct tegra_dma_channel; #define TEGRA_DMA_REQ_SEL_OWR 25 #define TEGRA_DMA_REQ_SEL_INVALID 31 +#if defined(CONFIG_TEGRA_SYSTEM_DMA) + +struct tegra_dma_req; +struct tegra_dma_channel; + enum tegra_dma_mode { TEGRA_DMA_SHARED = 1, TEGRA_DMA_MODE_CONTINOUS = 2, diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index a3e0c8692f0d..52af00446a63 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -7,6 +7,7 @@ config UX500_SOC_COMMON select HAS_MTU select ARM_ERRATA_753970 select ARM_ERRATA_754322 + select ARM_ERRATA_764369 menu "Ux500 SoC" diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 23be34b3bb6e..5dde4d4ebe88 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -261,6 +261,8 @@ void __init mop500_sdi_init(void) void __init snowball_sdi_init(void) { + /* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */ + mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED; /* On-board eMMC */ db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID); /* External Micro SD slot */ diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 122ddde00ba7..da5569d83d58 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -12,44 +12,6 @@ static void __iomem *l2x0_base; -static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask) -{ - /* wait for the operation to complete */ - while (readl_relaxed(reg) & mask) - cpu_relax(); -} - -static inline void ux500_cache_sync(void) -{ - writel_relaxed(0, l2x0_base + L2X0_CACHE_SYNC); - ux500_cache_wait(l2x0_base + L2X0_CACHE_SYNC, 1); -} - -/* - * The L2 cache cannot be turned off in the non-secure world. - * Dummy until a secure service is in place. - */ -static void ux500_l2x0_disable(void) -{ -} - -/* - * This is only called when doing a kexec, just after turning off the L2 - * and L1 cache, and it is surrounded by a spinlock in the generic version. - * However, we're not really turning off the L2 cache right now and the - * PL310 does not support exclusive accesses (used to implement the spinlock). - * So, the invalidation needs to be done without the spinlock. - */ -static void ux500_l2x0_inv_all(void) -{ - uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */ - - /* invalidate all ways */ - writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); - ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); - ux500_cache_sync(); -} - static int __init ux500_l2x0_unlock(void) { int i; @@ -85,9 +47,13 @@ static int __init ux500_l2x0_init(void) /* 64KB way size, 8 way associativity, force WA */ l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); - /* Override invalidate function */ - outer_cache.disable = ux500_l2x0_disable; - outer_cache.inv_all = ux500_l2x0_inv_all; + /* + * We can't disable l2 as we are in non secure mode, currently + * this seems be called only during kexec path. So let's + * override outer.disable with nasty assignment until we have + * some SMI service available. + */ + outer_cache.disable = NULL; return 0; } diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c index 572015e57cd9..c76f0f456f04 100644 --- a/arch/arm/mach-ux500/hotplug.c +++ b/arch/arm/mach-ux500/hotplug.c @@ -13,6 +13,7 @@ #include <linux/smp.h> #include <asm/cacheflush.h> +#include <asm/smp_plat.h> extern volatile int pen_release; diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index a19e398dade3..d2058ef8345f 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -19,6 +19,7 @@ #include <asm/cacheflush.h> #include <asm/hardware/gic.h> +#include <asm/smp_plat.h> #include <asm/smp_scu.h> #include <mach/hardware.h> #include <mach/setup.h> diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 0a01cbdfe063..9f9e1c203061 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -95,13 +95,7 @@ static struct musb_hdrc_config musb_hdrc_config = { }; static struct musb_hdrc_platform_data musb_platform_data = { -#if defined(CONFIG_USB_MUSB_OTG) .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_PERIPHERAL) - .mode = MUSB_PERIPHERAL, -#else /* defined(CONFIG_USB_MUSB_HOST) */ - .mode = MUSB_HOST, -#endif .config = &musb_hdrc_config, .board_data = &musb_board_data, }; diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 2b1e836a76ed..b1e87c184e54 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -217,7 +217,7 @@ static void __init ct_ca9x4_init(void) } #ifdef CONFIG_SMP -static void ct_ca9x4_init_cpu_map(void) +static void __init ct_ca9x4_init_cpu_map(void) { int i, ncores = scu_get_core_count(MMIO_P2V(A9_MPCORE_SCU)); @@ -233,7 +233,7 @@ static void ct_ca9x4_init_cpu_map(void) set_smp_cross_call(gic_raise_softirq); } -static void ct_ca9x4_smp_enable(unsigned int max_cpus) +static void __init ct_ca9x4_smp_enable(unsigned int max_cpus) { scu_enable(MMIO_P2V(A9_MPCORE_SCU)); } diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c index 813ee08f96e6..3034a4dab4a1 100644 --- a/arch/arm/mach-vexpress/hotplug.c +++ b/arch/arm/mach-vexpress/hotplug.c @@ -13,6 +13,7 @@ #include <linux/smp.h> #include <asm/cacheflush.h> +#include <asm/smp_plat.h> #include <asm/system.h> extern volatile int pen_release; diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 4cefb57d9ed2..7edef9121632 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -631,7 +631,8 @@ comment "Processor Features" config ARM_LPAE bool "Support for the Large Physical Address Extension" - depends on MMU && CPU_V7 + depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \ + !CPU_32v4 && !CPU_32v3 help Say Y if you have an ARMv7 processor supporting the LPAE page table format and you would like to access memory beyond the @@ -882,6 +883,7 @@ config CACHE_XSC3L2 config ARM_L1_CACHE_SHIFT_6 bool + default y if CPU_V7 help Setting ARM L1 cache line size to 64 Bytes. diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 07c4bc8ea0a4..a655d3da386d 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -54,9 +54,15 @@ loop1: and r1, r1, #7 @ mask of the bits for current cache only cmp r1, #2 @ see what cache we have at this level blt skip @ skip if no cache, or just i-cache +#ifdef CONFIG_PREEMPT + save_and_disable_irqs_notrace r9 @ make cssr&csidr read atomic +#endif mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr isb @ isb to sych the new cssr&csidr mrc p15, 1, r1, c0, c0, 0 @ read the new csidr +#ifdef CONFIG_PREEMPT + restore_irqs_notrace r9 +#endif and r2, r1, #7 @ extract the length of the cache lines add r2, r2, #4 @ add 4 (line length offset) ldr r4, =0x3ff diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 6ec1226fc62d..5dc7d127a40f 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -310,7 +310,7 @@ static void arm_memory_present(void) static bool arm_memblock_steal_permitted = true; -phys_addr_t arm_memblock_steal(phys_addr_t size, phys_addr_t align) +phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align) { phys_addr_t phys; diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 7e9b5bf910c1..0404ccbb8aa3 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -148,10 +148,6 @@ ENDPROC(cpu_v7_do_resume) * Initialise TLB, Caches, and MMU state ready to switch the MMU * on. Return in r0 the new CP15 C1 control register setting. * - * We automatically detect if we have a Harvard cache, and use the - * Harvard cache control instructions insead of the unified cache - * control instructions. - * * This should be able to cover all ARMv7 cores. * * It is assumed that: @@ -251,9 +247,7 @@ __v7_setup: #endif 3: mov r10, #0 -#ifdef HARVARD_CACHE mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate -#endif dsb #ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs @@ -330,16 +324,6 @@ __v7_ca5mp_proc_info: .size __v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info /* - * ARM Ltd. Cortex A7 processor. - */ - .type __v7_ca7mp_proc_info, #object -__v7_ca7mp_proc_info: - .long 0x410fc070 - .long 0xff0ffff0 - __v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV - .size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info - - /* * ARM Ltd. Cortex A9 processor. */ .type __v7_ca9mp_proc_info, #object @@ -351,6 +335,16 @@ __v7_ca9mp_proc_info: #endif /* CONFIG_ARM_LPAE */ /* + * ARM Ltd. Cortex A7 processor. + */ + .type __v7_ca7mp_proc_info, #object +__v7_ca7mp_proc_info: + .long 0x410fc070 + .long 0xff0ffff0 + __v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV + .size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info + + /* * ARM Ltd. Cortex A15 processor. */ .type __v7_ca15mp_proc_info, #object diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index b30708e28c1d..dcebb1230f7f 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -17,26 +17,17 @@ config ARCH_IMX_V4_V5 and ARMv5 SoCs config ARCH_IMX_V6_V7 - bool "i.MX3, i.MX6" + bool "i.MX3, i.MX5, i.MX6" select AUTO_ZRELADDR if !ZBOOT_ROM select ARM_PATCH_PHYS_VIRT select MIGHT_HAVE_CACHE_L2X0 help - This enables support for systems based on the Freescale i.MX3 and i.MX6 - family. - -config ARCH_MX5 - bool "i.MX50, i.MX51, i.MX53" - select AUTO_ZRELADDR if !ZBOOT_ROM - select ARM_PATCH_PHYS_VIRT - help - This enables support for machines using Freescale's i.MX50 and i.MX53 - processors. + This enables support for systems based on the Freescale i.MX3, i.MX5 + and i.MX6 family. endchoice source "arch/arm/mach-imx/Kconfig" -source "arch/arm/mach-mx5/Kconfig" endmenu diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h index 6fa8a707b9a0..f7d18046c04f 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v1.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h @@ -96,6 +96,6 @@ extern int mxc_gpio_mode(int gpio_mode); extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, const char *label); -extern int __init imx_iomuxv1_init(void __iomem *base, int numports); +extern int imx_iomuxv1_init(void __iomem *base, int numports); #endif /* __MACH_IOMUX_V1_H__ */ diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h index 64f9d1c7f1bb..3047ff923a63 100644 --- a/arch/arm/plat-omap/include/plat/omap-secure.h +++ b/arch/arm/plat-omap/include/plat/omap-secure.h @@ -3,7 +3,7 @@ #include <linux/types.h> -#ifdef CONFIG_ARCH_OMAP2PLUS +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) extern int omap_secure_ram_reserve_memblock(void); #else static inline void omap_secure_ram_reserve_memblock(void) diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index e5a2fde29b19..089899a7db72 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -789,10 +789,7 @@ void __init orion_xor1_init(unsigned long mapbase_low, /***************************************************************************** * EHCI ****************************************************************************/ -static struct orion_ehci_data orion_ehci_data = { - .phy_version = EHCI_PHY_NA, -}; - +static struct orion_ehci_data orion_ehci_data; static u64 ehci_dmamask = DMA_BIT_MASK(32); @@ -812,8 +809,10 @@ static struct platform_device orion_ehci = { }; void __init orion_ehci_init(unsigned long mapbase, - unsigned long irq) + unsigned long irq, + enum orion_ehci_phy_ver phy_version) { + orion_ehci_data.phy_version = phy_version; fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1, irq); diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index 0fe08d77e835..a7fa005a5a0e 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -89,7 +89,8 @@ void __init orion_xor1_init(unsigned long mapbase_low, unsigned long irq_1); void __init orion_ehci_init(unsigned long mapbase, - unsigned long irq); + unsigned long irq, + enum orion_ehci_phy_ver phy_version); void __init orion_ehci_1_init(unsigned long mapbase, unsigned long irq); diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c index 91553432711d..3b1e17bd3d17 100644 --- a/arch/arm/plat-orion/mpp.c +++ b/arch/arm/plat-orion/mpp.c @@ -64,8 +64,7 @@ void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask, gpio_mode |= GPIO_INPUT_OK; if (*mpp_list & MPP_OUTPUT_MASK) gpio_mode |= GPIO_OUTPUT_OK; - if (sel != 0) - gpio_mode = 0; + orion_gpio_set_valid(num, gpio_mode); } diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 32a6e394db24..f10768e988d4 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -468,8 +468,10 @@ void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) + if (!pd) { pd = &default_i2c_data; + pd->bus_num = 0; + } npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), &s3c_device_i2c0); diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c index 92f18d372b69..49c7db48c7f1 100644 --- a/arch/arm/plat-versatile/platsmp.c +++ b/arch/arm/plat-versatile/platsmp.c @@ -16,6 +16,7 @@ #include <linux/smp.h> #include <asm/cacheflush.h> +#include <asm/smp_plat.h> #include <asm/hardware/gic.h> /* |
