diff options
Diffstat (limited to 'arch/arm/mach-shmobile/setup-r8a7790.c')
| -rw-r--r-- | arch/arm/mach-shmobile/setup-r8a7790.c | 121 |
1 files changed, 107 insertions, 14 deletions
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index 28f94752b8ff..d0f5c9f9349a 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -18,13 +18,14 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/clocksource.h> #include <linux/irq.h> -#include <linux/irqchip.h> #include <linux/kernel.h> #include <linux/of_platform.h> -#include <linux/serial_sci.h> #include <linux/platform_data/gpio-rcar.h> #include <linux/platform_data/irq-renesas-irqc.h> +#include <linux/serial_sci.h> +#include <linux/sh_timer.h> #include <mach/common.h> #include <mach/irqs.h> #include <mach/r8a7790.h> @@ -149,7 +150,37 @@ static struct resource irqc0_resources[] __initdata = { &irqc##idx##_data, \ sizeof(struct renesas_irqc_config)) -void __init r8a7790_add_standard_devices(void) +static struct resource thermal_resources[] __initdata = { + DEFINE_RES_MEM(0xe61f0000, 0x14), + DEFINE_RES_MEM(0xe61f0100, 0x38), + DEFINE_RES_IRQ(gic_spi(69)), +}; + +#define r8a7790_register_thermal() \ + platform_device_register_simple("rcar_thermal", -1, \ + thermal_resources, \ + ARRAY_SIZE(thermal_resources)) + +static struct sh_timer_config cmt00_platform_data __initdata = { + .name = "CMT00", + .timer_bit = 0, + .clockevent_rating = 80, +}; + +static struct resource cmt00_resources[] __initdata = { + DEFINE_RES_MEM(0xffca0510, 0x0c), + DEFINE_RES_MEM(0xffca0500, 0x04), + DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */ +}; + +#define r8a7790_register_cmt(idx) \ + platform_device_register_resndata(&platform_bus, "sh_cmt", \ + idx, cmt##idx##_resources, \ + ARRAY_SIZE(cmt##idx##_resources), \ + &cmt##idx##_platform_data, \ + sizeof(struct sh_timer_config)) + +void __init r8a7790_add_dt_devices(void) { r8a7790_register_scif(SCIFA0); r8a7790_register_scif(SCIFA1); @@ -161,35 +192,97 @@ void __init r8a7790_add_standard_devices(void) r8a7790_register_scif(SCIF1); r8a7790_register_scif(HSCIF0); r8a7790_register_scif(HSCIF1); + r8a7790_register_cmt(00); +} + +void __init r8a7790_add_standard_devices(void) +{ + r8a7790_add_dt_devices(); r8a7790_register_irqc(0); + r8a7790_register_thermal(); } +#define MODEMR 0xe6160060 + +u32 __init r8a7790_read_mode_pins(void) +{ + void __iomem *modemr = ioremap_nocache(MODEMR, 4); + u32 mode; + + BUG_ON(!modemr); + mode = ioread32(modemr); + iounmap(modemr); + + return mode; +} + +#define CNTCR 0 +#define CNTFID0 0x20 + void __init r8a7790_timer_init(void) { - void __iomem *cntcr; +#ifdef CONFIG_ARM_ARCH_TIMER + u32 mode = r8a7790_read_mode_pins(); + void __iomem *base; + int extal_mhz = 0; + u32 freq; + + /* At Linux boot time the r8a7790 arch timer comes up + * with the counter disabled. Moreover, it may also report + * a potentially incorrect fixed 13 MHz frequency. To be + * correct these registers need to be updated to use the + * frequency EXTAL / 2 which can be determined by the MD pins. + */ - /* make sure arch timer is started by setting bit 0 of CNTCT */ - cntcr = ioremap(0xe6080000, PAGE_SIZE); - iowrite32(1, cntcr); - iounmap(cntcr); + switch (mode & (MD(14) | MD(13))) { + case 0: + extal_mhz = 15; + break; + case MD(13): + extal_mhz = 20; + break; + case MD(14): + extal_mhz = 26; + break; + case MD(13) | MD(14): + extal_mhz = 30; + break; + } - shmobile_timer_init(); + /* The arch timer frequency equals EXTAL / 2 */ + freq = extal_mhz * (1000000 / 2); + + /* Remap "armgcnt address map" space */ + base = ioremap(0xe6080000, PAGE_SIZE); + + /* Update registers with correct frequency */ + iowrite32(freq, base + CNTFID0); + asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq)); + + /* make sure arch timer is started by setting bit 0 of CNTCR */ + iowrite32(1, base + CNTCR); + iounmap(base); +#endif /* CONFIG_ARM_ARCH_TIMER */ + + clocksource_of_init(); } -#ifdef CONFIG_USE_OF -void __init r8a7790_add_standard_devices_dt(void) +void __init r8a7790_init_delay(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +#ifndef CONFIG_ARM_ARCH_TIMER + shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */ +#endif } +#ifdef CONFIG_USE_OF + static const char *r8a7790_boards_compat_dt[] __initdata = { "renesas,r8a7790", NULL, }; DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)") - .init_irq = irqchip_init, - .init_machine = r8a7790_add_standard_devices_dt, + .init_early = r8a7790_init_delay, .init_time = r8a7790_timer_init, .dt_compat = r8a7790_boards_compat_dt, MACHINE_END |
