1 files changed, 0 insertions, 331 deletions
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
deleted file mode 100644
index dfdaa8a498a4..000000000000
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ /dev/null
@@ -1,331 +0,0 @@
-/*
- * arch/arm/mach-orion5x/ls-chl-setup.c
- *
- * Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio-fan.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "common.h"
-#include "mpp.h"
-#include "orion5x.h"
-
-/*****************************************************************************
- * Linkstation LS-CHL Info
- ****************************************************************************/
-
-/*
- * 256K NOR flash Device bus boot chip select
- */
-
-#define LSCHL_NOR_BOOT_BASE	0xf4000000
-#define LSCHL_NOR_BOOT_SIZE	SZ_256K
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data lschl_nor_flash_data = {
-	.width = 1,
-};
-
-static struct resource lschl_nor_flash_resource = {
-	.flags	= IORESOURCE_MEM,
-	.start	= LSCHL_NOR_BOOT_BASE,
-	.end	= LSCHL_NOR_BOOT_BASE + LSCHL_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device lschl_nor_flash = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data	= &lschl_nor_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &lschl_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data lschl_eth_data = {
-	.phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-
-static struct i2c_board_info __initdata lschl_i2c_rtc = {
-	I2C_BOARD_INFO("rs5c372a", 0x32),
-};
-
-/*****************************************************************************
- * LEDs attached to GPIO
- ****************************************************************************/
-
-#define LSCHL_GPIO_LED_ALARM	2
-#define LSCHL_GPIO_LED_INFO	3
-#define LSCHL_GPIO_LED_FUNC	17
-#define LSCHL_GPIO_LED_PWR	0
-
-static struct gpio_led lschl_led_pins[] = {
-	{
-		.name = "alarm:red",
-		.gpio = LSCHL_GPIO_LED_ALARM,
-		.active_low = 1,
-	}, {
-		.name = "info:amber",
-		.gpio = LSCHL_GPIO_LED_INFO,
-		.active_low = 1,
-	}, {
-		.name = "func:blue:top",
-		.gpio = LSCHL_GPIO_LED_FUNC,
-		.active_low = 1,
-	}, {
-		.name = "power:blue:bottom",
-		.gpio = LSCHL_GPIO_LED_PWR,
-	},
-};
-
-static struct gpio_led_platform_data lschl_led_data = {
-	.leds = lschl_led_pins,
-	.num_leds = ARRAY_SIZE(lschl_led_pins),
-};
-
-static struct platform_device lschl_leds = {
-	.name = "leds-gpio",
-	.id = -1,
-	.dev = {
-		.platform_data = &lschl_led_data,
-	},
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct mv_sata_platform_data lschl_sata_data = {
-	.n_ports = 2,
-};
-
-/*****************************************************************************
- * LS-CHL specific power off method: reboot
- ****************************************************************************/
-/*
- * On the LS-CHL, the shutdown process is following:
- * - Userland monitors key events until the power switch goes to off position
- * - The board reboots
- * - U-boot starts and goes into an idle mode waiting for the user
- *   to move the switch to ON position
- *
- */
-
-static void lschl_power_off(void)
-{
-	orion5x_restart(REBOOT_HARD, NULL);
-}
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-#define LSCHL_GPIO_USB_POWER	9
-#define LSCHL_GPIO_AUTO_POWER	17
-#define LSCHL_GPIO_POWER	18
-
-/****************************************************************************
- * GPIO Attached Keys
- ****************************************************************************/
-#define LSCHL_GPIO_KEY_FUNC		15
-#define LSCHL_GPIO_KEY_POWER		8
-#define LSCHL_GPIO_KEY_AUTOPOWER	10
-#define LSCHL_SW_POWER		0x00
-#define LSCHL_SW_AUTOPOWER	0x01
-#define LSCHL_SW_FUNC		0x02
-
-static struct gpio_keys_button lschl_buttons[] = {
-	{
-		.type = EV_SW,
-		.code = LSCHL_SW_POWER,
-		.gpio = LSCHL_GPIO_KEY_POWER,
-		.desc = "Power-on Switch",
-		.active_low = 1,
-	}, {
-		.type = EV_SW,
-		.code = LSCHL_SW_AUTOPOWER,
-		.gpio = LSCHL_GPIO_KEY_AUTOPOWER,
-		.desc = "Power-auto Switch",
-		.active_low = 1,
-	}, {
-		.type = EV_SW,
-		.code = LSCHL_SW_FUNC,
-		.gpio = LSCHL_GPIO_KEY_FUNC,
-		.desc = "Function Switch",
-		.active_low = 1,
-	},
-};
-
-static struct gpio_keys_platform_data lschl_button_data = {
-	.buttons = lschl_buttons,
-	.nbuttons = ARRAY_SIZE(lschl_buttons),
-};
-
-static struct platform_device lschl_button_device = {
-	.name = "gpio-keys",
-	.id = -1,
-	.num_resources = 0,
-	.dev = {
-		.platform_data = &lschl_button_data,
-	},
-};
-
-#define LSCHL_GPIO_HDD_POWER	1
-
-/****************************************************************************
- * GPIO Fan
- ****************************************************************************/
-
-#define LSCHL_GPIO_FAN_LOW	16
-#define LSCHL_GPIO_FAN_HIGH	14
-#define LSCHL_GPIO_FAN_LOCK	6
-
-static struct gpio_fan_alarm lschl_alarm = {
-	.gpio = LSCHL_GPIO_FAN_LOCK,
-};
-
-static struct gpio_fan_speed lschl_speeds[] = {
-	{
-		.rpm = 0,
-		.ctrl_val = 3,
-	}, {
-		.rpm = 1500,
-		.ctrl_val = 2,
-	}, {
-		.rpm = 3250,
-		.ctrl_val = 1,
-	}, {
-		.rpm = 5000,
-		.ctrl_val = 0,
-	},
-};
-
-static int lschl_gpio_list[] = {
-	LSCHL_GPIO_FAN_HIGH, LSCHL_GPIO_FAN_LOW,
-};
-
-static struct gpio_fan_platform_data lschl_fan_data = {
-	.num_ctrl = ARRAY_SIZE(lschl_gpio_list),
-	.ctrl = lschl_gpio_list,
-	.alarm = &lschl_alarm,
-	.num_speed = ARRAY_SIZE(lschl_speeds),
-	.speed = lschl_speeds,
-};
-
-static struct platform_device lschl_fan_device = {
-	.name = "gpio-fan",
-	.id = -1,
-	.num_resources = 0,
-	.dev = {
-		.platform_data = &lschl_fan_data,
-	},
-};
-
-/****************************************************************************
- * GPIO Data
- ****************************************************************************/
-
-static unsigned int lschl_mpp_modes[] __initdata = {
-	MPP0_GPIO, /* LED POWER */
-	MPP1_GPIO, /* HDD POWER */
-	MPP2_GPIO, /* LED ALARM */
-	MPP3_GPIO, /* LED INFO */
-	MPP4_UNUSED,
-	MPP5_UNUSED,
-	MPP6_GPIO, /* FAN LOCK */
-	MPP7_GPIO, /* SW INIT */
-	MPP8_GPIO, /* SW POWER */
-	MPP9_GPIO, /* USB POWER */
-	MPP10_GPIO, /* SW AUTO POWER */
-	MPP11_UNUSED,
-	MPP12_UNUSED,
-	MPP13_UNUSED,
-	MPP14_GPIO, /* FAN HIGH */
-	MPP15_GPIO, /* SW FUNC */
-	MPP16_GPIO, /* FAN LOW */
-	MPP17_GPIO, /* LED FUNC */
-	MPP18_UNUSED,
-	MPP19_UNUSED,
-	0,
-};
-
-static void __init lschl_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Needs to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(lschl_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&lschl_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&lschl_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    LSCHL_NOR_BOOT_BASE,
-				    LSCHL_NOR_BOOT_SIZE);
-	platform_device_register(&lschl_nor_flash);
-
-	platform_device_register(&lschl_leds);
-
-	platform_device_register(&lschl_button_device);
-
-	platform_device_register(&lschl_fan_device);
-
-	i2c_register_board_info(0, &lschl_i2c_rtc, 1);
-
-	/* usb power on */
-	gpio_set_value(LSCHL_GPIO_USB_POWER, 1);
-
-	/* register power-off method */
-	pm_power_off = lschl_power_off;
-
-	pr_info("%s: finished\n", __func__);
-}
-
-MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
-	/* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= lschl_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END