diff options
Diffstat (limited to 'arch/arm/boot/dts/vf610-zii-cfu1.dts')
| -rw-r--r-- | arch/arm/boot/dts/vf610-zii-cfu1.dts | 305 |
1 files changed, 305 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts new file mode 100644 index 000000000000..37777cf22e67 --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -0,0 +1,305 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Copyright (C) 2018 Zodiac Inflight Innovations + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "ZII VF610 CFU1 Board"; + compatible = "zii,vf610cfu1", "zii,vf610dev", "fsl,vf610"; + + chosen { + stdout-path = &uart0; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + led-debug { + label = "zii:green:debug1"; + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + max-brightness = <1>; + }; + + led-fail { + label = "zii:red:fail"; + gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + max-brightness = <1>; + }; + + led-status { + label = "zii:green:status"; + gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + max-brightness = <1>; + }; + + led-debug-a { + label = "zii:green:debug_a"; + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + default-state = "off"; + max-brightness = <1>; + }; + + led-debug-b { + label = "zii:green:debug_b"; + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + default-state = "off"; + max-brightness = <1>; + }; + }; + + reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; + status = "okay"; + + m25p128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + label = "m25p128-0"; + reg = <0x0 0x01000000>; + }; + }; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch0: switch0@0 { + compatible = "marvell,mv88e6085"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_switch>; + reg = <0>; + eeprom-length = <512>; + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "eth_cu_1000_1"; + }; + + port@1 { + reg = <1>; + label = "eth_cu_1000_2"; + }; + + port@2 { + reg = <2>; + label = "eth_cu_1000_3"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + pca9554@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + }; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24c04@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + label = "nvm"; + }; + + at24c04@54 { + compatible = "atmel,24c04"; + reg = <0x54>; + label = "nameplate"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&iomuxc { + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30fe + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD3__GPIO_82 0x31c2 + VF610_PAD_PTE3__GPIO_108 0x31c2 + VF610_PAD_PTE4__GPIO_109 0x31c2 + VF610_PAD_PTE5__GPIO_110 0x31c2 + VF610_PAD_PTE6__GPIO_111 0x31c2 + >; + }; + + pinctrl_switch: switch-grp { + fsl,pins = < + VF610_PAD_PTB28__GPIO_98 0x3061 + VF610_PAD_PTE2__GPIO_107 0x1042 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; +}; |
