diff options
Diffstat (limited to 'arch/arm/boot/dts/kirkwood-nsa325.dts')
| -rw-r--r-- | arch/arm/boot/dts/kirkwood-nsa325.dts | 238 |
1 files changed, 238 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/kirkwood-nsa325.dts new file mode 100644 index 000000000000..bc4ec9332387 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa325.dts @@ -0,0 +1,238 @@ +/* Device tree file for the Zyxel NSA 325 NAS box. + * + * Copyright (c) 2015, Hans Ulli Kroll <ulli.kroll@googlemail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Based upon the board setup file created by Peter Schildmann + */ + +/dts-v1/; + +#include "kirkwood-nsa3x0-common.dtsi" + +/ { + model = "ZyXEL NSA325"; + compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pinctrl-names = "default"; + + pmx_led_hdd2_green: pmx-led-hdd2-green { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + pmx_led_hdd2_red: pmx-led-hdd2-red { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_mcu_data: pmx-mcu-data { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + pmx_led_usb_green: pmx-led-usb-green { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + pmx_mcu_clk: pmx-mcu-clk { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_mcu_act: pmx-mcu-act { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + pmx_led_sys_green: pmx-led-sys-green { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + pmx_led_sys_orange: pmx-led-sys-orange { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_led_hdd1_green: pmx-led-hdd1-green { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + pmx_led_hdd1_red: pmx-led-hdd1-red { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + pmx_htp: pmx-htp { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + + /* + * Buzzer needs to be switched at around 1kHz so is + * not compatible with the gpio-beeper driver. + */ + pmx_buzzer: pmx-buzzer { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + pmx_vid_b1: pmx-vid-b1 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + pmx_power_resume_data: pmx-power-resume-data { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + pmx_power_resume_clk: pmx-power-resume-clk { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + + pmx_pwr_sata1: pmx-pwr-sata1 { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; + + /* This board uses the pcf8563 RTC instead of the SoC RTC */ + rtc@10300 { + status = "disabled"; + }; + + i2c@11000 { + status = "okay"; + + pcf8563: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_pwr_sata1>; + pinctrl-names = "default"; + + usb0_power: regulator@1 { + enable-active-high; + }; + + sata1_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red + &pmx_led_usb_green + &pmx_led_sys_green &pmx_led_sys_orange + &pmx_led_copy_green &pmx_led_copy_red + &pmx_led_hdd1_green &pmx_led_hdd1_red>; + pinctrl-names = "default"; + + green-sys { + label = "nsa325:green:sys"; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + }; + orange-sys { + label = "nsa325:orange:sys"; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + green-hdd1 { + label = "nsa325:green:hdd1"; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; + red-hdd1 { + label = "nsa325:red:hdd1"; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; + green-hdd2 { + label = "nsa325:green:hdd2"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + red-hdd2 { + label = "nsa325:red:hdd2"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + green-usb { + label = "nsa325:green:usb"; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + }; + green-copy { + label = "nsa325:green:copy"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + }; + red-copy { + label = "nsa325:red:copy"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; + + /* The following pins are currently not assigned to a driver, + some of them should be configured as inputs. + pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act + &pmx_htp &pmx_vid_b1 + &pmx_power_resume_data &pmx_power_resume_clk>; */ + }; + + +}; + +&mdio { + status = "okay"; + ethphy0: ethernet-phy@1 { + reg = <1>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + |
