diff options
Diffstat (limited to 'arch/arm/boot/compressed/head.S')
| -rw-r--r-- | arch/arm/boot/compressed/head.S | 121 |
1 files changed, 114 insertions, 7 deletions
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index e95a5989602a..9f5ac11ccd8e 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -216,6 +216,103 @@ restart: adr r0, LC0 mov r10, r6 #endif + mov r5, #0 @ init dtb size to 0 +#ifdef CONFIG_ARM_APPENDED_DTB +/* + * r0 = delta + * r2 = BSS start + * r3 = BSS end + * r4 = final kernel address + * r5 = appended dtb size (still unknown) + * r6 = _edata + * r7 = architecture ID + * r8 = atags/device tree pointer + * r9 = size of decompressed image + * r10 = end of this image, including bss/stack/malloc space if non XIP + * r11 = GOT start + * r12 = GOT end + * sp = stack pointer + * + * if there are device trees (dtb) appended to zImage, advance r10 so that the + * dtb data will get relocated along with the kernel if necessary. + */ + + ldr lr, [r6, #0] +#ifndef __ARMEB__ + ldr r1, =0xedfe0dd0 @ sig is 0xd00dfeed big endian +#else + ldr r1, =0xd00dfeed +#endif + cmp lr, r1 + bne dtb_check_done @ not found + +#ifdef CONFIG_ARM_ATAG_DTB_COMPAT + /* + * OK... Let's do some funky business here. + * If we do have a DTB appended to zImage, and we do have + * an ATAG list around, we want the later to be translated + * and folded into the former here. To be on the safe side, + * let's temporarily move the stack away into the malloc + * area. No GOT fixup has occurred yet, but none of the + * code we're about to call uses any global variable. + */ + add sp, sp, #0x10000 + stmfd sp!, {r0-r3, ip, lr} + mov r0, r8 + mov r1, r6 + sub r2, sp, r6 + bl atags_to_fdt + + /* + * If returned value is 1, there is no ATAG at the location + * pointed by r8. Try the typical 0x100 offset from start + * of RAM and hope for the best. + */ + cmp r0, #1 + sub r0, r4, #(TEXT_OFFSET - 0x100) + mov r1, r6 + sub r2, sp, r6 + blne atags_to_fdt + + ldmfd sp!, {r0-r3, ip, lr} + sub sp, sp, #0x10000 +#endif + + mov r8, r6 @ use the appended device tree + + /* + * Make sure that the DTB doesn't end up in the final + * kernel's .bss area. To do so, we adjust the decompressed + * kernel size to compensate if that .bss size is larger + * than the relocated code. + */ + ldr r5, =_kernel_bss_size + adr r1, wont_overwrite + sub r1, r6, r1 + subs r1, r5, r1 + addhi r9, r9, r1 + + /* Get the dtb's size */ + ldr r5, [r6, #4] +#ifndef __ARMEB__ + /* convert r5 (dtb size) to little endian */ + eor r1, r5, r5, ror #16 + bic r1, r1, #0x00ff0000 + mov r5, r5, ror #8 + eor r5, r5, r1, lsr #8 +#endif + + /* preserve 64-bit alignment */ + add r5, r5, #7 + bic r5, r5, #7 + + /* relocate some pointers past the appended dtb */ + add r6, r6, r5 + add r10, r10, r5 + add sp, sp, r5 +dtb_check_done: +#endif + /* * Check to see if we will overwrite ourselves. * r4 = final kernel address @@ -223,15 +320,14 @@ restart: adr r0, LC0 * r10 = end of this image, including bss/stack/malloc space if non XIP * We basically want: * r4 - 16k page directory >= r10 -> OK - * r4 + image length <= current position (pc) -> OK + * r4 + image length <= address of wont_overwrite -> OK */ add r10, r10, #16384 cmp r4, r10 bhs wont_overwrite add r10, r4, r9 - ARM( cmp r10, pc ) - THUMB( mov lr, pc ) - THUMB( cmp r10, lr ) + adr r9, wont_overwrite + cmp r10, r9 bls wont_overwrite /* @@ -285,14 +381,16 @@ wont_overwrite: * r2 = BSS start * r3 = BSS end * r4 = kernel execution address + * r5 = appended dtb size (0 if not present) * r7 = architecture ID * r8 = atags pointer * r11 = GOT start * r12 = GOT end * sp = stack pointer */ - teq r0, #0 + orrs r1, r0, r5 beq not_relocated + add r11, r11, r0 add r12, r12, r0 @@ -307,12 +405,21 @@ wont_overwrite: /* * Relocate all entries in the GOT table. + * Bump bss entries to _edata + dtb size */ 1: ldr r1, [r11, #0] @ relocate entries in the GOT - add r1, r1, r0 @ table. This fixes up the - str r1, [r11], #4 @ C references. + add r1, r1, r0 @ This fixes up C references + cmp r1, r2 @ if entry >= bss_start && + cmphs r3, r1 @ bss_end > entry + addhi r1, r1, r5 @ entry += dtb size + str r1, [r11], #4 @ next entry cmp r11, r12 blo 1b + + /* bump our bss pointers too */ + add r2, r2, r5 + add r3, r3, r5 + #else /* |
