diff options
Diffstat (limited to 'Documentation/devicetree')
4 files changed, 21 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt index 6888a5efc860..c0105de55cbd 100644 --- a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt +++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt @@ -6,6 +6,7 @@ provided by Arteris. Required properties: - compatible : Should be "ti,omap3-l3-smx" for OMAP3 family Should be "ti,omap4-l3-noc" for OMAP4 family +- reg: Contains L3 register address range for each noc domain. - ti,hwmods: "l3_main_1", ... One hwmod for each noc domain. Examples: diff --git a/Documentation/devicetree/bindings/arm/omap/timer.txt b/Documentation/devicetree/bindings/arm/omap/timer.txt index 8732d4d41f8b..d02e27c764ec 100644 --- a/Documentation/devicetree/bindings/arm/omap/timer.txt +++ b/Documentation/devicetree/bindings/arm/omap/timer.txt @@ -1,7 +1,20 @@ OMAP Timer bindings Required properties: -- compatible: Must be "ti,omap2-timer" for OMAP2+ controllers. +- compatible: Should be set to one of the below. Please note that + OMAP44xx devices have timer instances that are 100% + register compatible with OMAP3xxx devices as well as + newer timers that are not 100% register compatible. + So for OMAP44xx devices timer instances may use + different compatible strings. + + ti,omap2420-timer (applicable to OMAP24xx devices) + ti,omap3430-timer (applicable to OMAP3xxx/44xx devices) + ti,omap4430-timer (applicable to OMAP44xx devices) + ti,omap5430-timer (applicable to OMAP543x devices) + ti,am335x-timer (applicable to AM335x devices) + ti,am335x-timer-1ms (applicable to AM335x devices) + - reg: Contains timer register address range (base address and length). - interrupts: Contains the interrupt information for the timer. The @@ -22,7 +35,7 @@ Optional properties: Example: timer12: timer@48304000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48304000 0x400>; interrupts = <95>; ti,hwmods = "timer12" diff --git a/Documentation/devicetree/bindings/gpio/gpio-omap.txt b/Documentation/devicetree/bindings/gpio/gpio-omap.txt index bff51a2fee1e..a56e3a53a360 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-omap.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-omap.txt @@ -5,12 +5,12 @@ Required properties: - "ti,omap2-gpio" for OMAP2 controllers - "ti,omap3-gpio" for OMAP3 controllers - "ti,omap4-gpio" for OMAP4 controllers +- gpio-controller : Marks the device node as a GPIO controller. - #gpio-cells : Should be two. - first cell is the pin number - second cell is used to specify optional parameters (unused) -- gpio-controller : Marks the device node as a GPIO controller. +- interrupt-controller: Mark the device node as an interrupt controller. - #interrupt-cells : Should be 2. -- interrupt-controller: Mark the device node as an interrupt controller The first cell is the GPIO number. The second cell is used to specify flags: bits[3:0] trigger type and level flags: @@ -29,8 +29,8 @@ Example: gpio4: gpio4 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio4"; - #gpio-cells = <2>; gpio-controller; - #interrupt-cells = <2>; + #gpio-cells = <2>; interrupt-controller; + #interrupt-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 1ef0ce71f8fa..abce25684abc 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -18,6 +18,7 @@ OMAP MUSB GLUE represents PERIPHERAL. - power : Should be "50". This signifies the controller can supply upto 100mA when operating in host mode. + - usb-phy : the phandle for the PHY device Optional properties: - ctrl-module : phandle of the control module this glue uses to write to |
