diff options
Diffstat (limited to 'Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt | 73 |
1 files changed, 64 insertions, 9 deletions
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt index 2aac1aa4123d..1eb72874130b 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt +++ b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt @@ -26,6 +26,7 @@ The following are the mandatory properties: "ti,k2hk-dsp" for DSPs on Keystone 2 66AK2H/K SoCs "ti,k2l-dsp" for DSPs on Keystone 2 66AK2L SoCs "ti,k2e-dsp" for DSPs on Keystone 2 66AK2E SoCs + "ti,k2g-dsp" for DSPs on Keystone 2 66AK2G SoCs - reg: Should contain an entry for each value in 'reg-names'. Each entry should have the memory region's start address @@ -37,20 +38,18 @@ The following are the mandatory properties: should be defined in this order, "l2sram", "l1pram", "l1dram" -- clocks: Should contain the device's input clock, and should be - defined as per the bindings in, - Documentation/devicetree/bindings/clock/keystone-gate.txt - - ti,syscon-dev: Should be a pair of the phandle to the Keystone Device State Control node, and the register offset of the DSP boot address register within that node's address space. - resets: Should contain the phandle to the reset controller node managing the resets for this device, and a reset - specifier. Please refer to the following reset bindings - for the reset argument specifier as per SoC, + specifier. Please refer to either of the following reset + bindings for the reset argument specifier as per SoC, Documentation/devicetree/bindings/reset/ti-syscon-reset.txt - for 66AK2HK/66AK2L/66AK2E SoCs + for 66AK2HK/66AK2L/66AK2E SoCs or, + Documentation/devicetree/bindings/reset/ti,sci-reset.txt + for 66AK2G SoCs - interrupt-parent: Should contain a phandle to the Keystone 2 IRQ controller IP node that is used by the ARM CorePac processor to @@ -75,6 +74,22 @@ The following are the mandatory properties: The gpio device to be used is as per the bindings in, Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt +SoC-specific Required properties: +--------------------------------- +The following are mandatory properties for Keystone 2 66AK2HK, 66AK2L and 66AK2E +SoCs only: + +- clocks: Should contain the device's input clock, and should be + defined as per the bindings in, + Documentation/devicetree/bindings/clock/keystone-gate.txt + +The following are mandatory properties for Keystone 2 66AK2G SoCs only: + +- power-domains: Should contain a phandle to a PM domain provider node + and an args specifier containing the DSP device id + value. This property is as per the binding, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt + Optional properties: -------------------- @@ -85,8 +100,10 @@ Optional properties: Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt -Example: --------- +Examples: +--------- + +1. /* 66AK2H/K DSP aliases */ aliases { rproc0 = &dsp0; @@ -131,3 +148,41 @@ Example: }; }; + +2. + /* 66AK2G DSP alias */ + aliases { + rproc0 = &dsp0; + }; + + /* 66AK2G DSP memory node */ + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dsp_common_memory: dsp-common-memory@81f800000 { + compatible = "shared-dma-pool"; + reg = <0x00000008 0x1f800000 0x00000000 0x800000>; + reusable; + }; + }; + + /* 66AK2G DSP node */ + soc { + dsp0: dsp@10800000 { + compatible = "ti,k2g-dsp"; + reg = <0x10800000 0x00100000>, + <0x10e00000 0x00008000>, + <0x10f00000 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + power-domains = <&k2g_pds 0x0046>; + ti,syscon-dev = <&devctrl 0x40>; + resets = <&k2g_reset 0x0046 0x1>; + interrupt-parent = <&kirq0>; + interrupts = <0 8>; + interrupt-names = "vring", "exception"; + kick-gpios = <&dspgpio0 27 0>; + memory-region = <&dsp_common_memory>; + }; + }; |
