diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl')
25 files changed, 270 insertions, 22 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt index 8fb5a53775e8..81b58dddd3ed 100644 --- a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt @@ -19,6 +19,10 @@ Required Properties: defines the interrupt number, the second encodes the trigger flags described in bindings/interrupt-controller/interrupts.txt +- interrupts: The interrupt outputs from the controller. There is one GPIO + interrupt per GPIO bank. The number of interrupts listed depends + on the number of GPIO banks on the SoC. The interrupts must be + ordered by bank, starting with bank 0. Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices, including the meaning of the @@ -180,6 +184,12 @@ Example: #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; uart2-default: uart2-default { pinmux { diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt index 61ac75706cc9..04d16fb69eb7 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt @@ -36,6 +36,8 @@ Optional properties: - GENERIC_PINCONFIG: generic pinconfig options to use, bias-disable, bias-pull-down, bias-pull-up, drive-open-drain, input-schmitt-enable, input-debounce, output-low, output-high. +- atmel,drive-strength: 0 or 1 for low drive, 2 for medium drive and 3 for +high drive. The default value is low drive. Example: @@ -66,6 +68,7 @@ Example: pinmux = <PIN_PB0>, <PIN_PB5>; bias-pull-up; + atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>; }; pinctrl_sdmmc1_default: sdmmc1_default { diff --git a/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt index f8fa28ce163e..0a2d5516e1f3 100644 --- a/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt @@ -23,7 +23,8 @@ Required properties: "marvell,berlin2q-system-pinctrl", "marvell,berlin4ct-avio-pinctrl", "marvell,berlin4ct-soc-pinctrl", - "marvell,berlin4ct-system-pinctrl" + "marvell,berlin4ct-system-pinctrl", + "syna,as370-soc-pinctrl" Required subnode-properties: - groups: a list of strings describing the group names. diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt new file mode 100644 index 000000000000..b0e36cf0d289 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt @@ -0,0 +1,99 @@ +Cirrus Logic Madera class audio codecs pinctrl driver + +The Cirrus Logic Madera codecs provide a number of GPIO functions for +interfacing to external hardware and to provide logic outputs to other devices. +Certain groups of GPIO pins also have an alternate function, normally as an +audio interface. + +The set of available GPIOs, functions and alternate function groups differs +between codecs so refer to the datasheet for the codec for further information +on what is supported on that device. + +The properties for this driver exist within the parent MFD driver node. + +See also + the core bindings for the parent MFD driver: + Documentation/devicetree/bindings/mfd/madera.txt + + the generic pinmix bindings: + Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + +Required properties of parent mfd node: + - pinctrl-names : must be "default" + - pinctrl-0 : a phandle to the node containing the subnodes containing default + configurations + +Required subnodes: + One subnode is required to contain the default settings. It contains an + arbitrary number of configuration subnodes, one for each group or pin + configuration you want to apply as a default. + +Required properties of configuration subnodes: + - groups : name of one pin group to configure. One of: + aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1, pdmspk2, + dmic4, dmic5, dmic6, + gpio1, gpio2, ..., gpio40 + The gpioN groups select the single pin of this name for configuration + +Optional properties of configuration subnodes: + Any configuration option not explicitly listed in the dts will be left at + chip default setting. + + - function : name of function to assign to this group. One of: + aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1, pdmspk2, + dmic3, dmic4, dmic5, dmic6, + io, dsp-gpio, irq1, irq2, + fll1-clk, fll1-lock, fll2-clk, fll2-lock, fll3-clk, fll3-lock, + fllao-clk, fllao-lock, + opclk, opclk-async, pwm1, pwm2, spdif, + asrc1-in1-lock, asrc1-in2-lock, asrc2-in1-lock, asrc2-in2-lock, + spkl-short-circuit, spkr-short-circuit, spk-shutdown, + spk-overheat-shutdown, spk-overheat-warn, + timer1-sts, timer2-sts, timer3-sts, timer4-sts, timer5-sts, timer6-sts, + timer7-sts, timer8-sts, + log1-fifo-ne, log2-fifo-ne, log3-fifo-ne, log4-fifo-ne, log5-fifo-ne, + log6-fifo-ne, log7-fifo-ne, log8-fifo-ne, + + - bias-disable : disable pull-up and pull-down + - bias-bus-hold : enable buskeeper + - bias-pull-up : output is pulled-up + - bias-pull-down : output is pulled-down + - drive-push-pull : CMOS output + - drive-open-drain : open-drain output + - drive-strength : drive strength in mA. Valid values are 4 or 8 + - input-schmitt-enable : enable schmitt-trigger mode + - input-schmitt-disable : disable schmitt-trigger mode + - input-debounce : A value of 0 disables debounce, a value !=0 enables + debounce + - output-low : set the pin to output mode with low level + - output-high : set the pin to output mode with high level + +Example: + +cs47l85@0 { + compatible = "cirrus,cs47l85"; + + pinctrl-names = "default"; + pinctrl-0 = <&cs47l85_defaults>; + + cs47l85_defaults: cs47l85-gpio-defaults { + aif1 { + groups = "aif1"; + function = "aif1"; + bias-bus-hold; + }; + + aif2 { + groups = "aif2"; + function = "aif2"; + bias-bus-hold; + }; + + opclk { + groups = "gpio1"; + function = "opclk"; + bias-pull-up; + drive-strength = <8>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt new file mode 100644 index 000000000000..66de75090458 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt @@ -0,0 +1,36 @@ +* Freescale IMX8MQ IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory +for common binding part and usage. + +Required properties: +- compatible: "fsl,imx8mq-iomuxc" +- reg: should contain the base physical address and size of the iomuxc + registers. + +Required properties in sub-nodes: +- fsl,pins: each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val + input_val> are specified using a PIN_FUNC_ID macro, which can be found in + imx8mq-pinfunc.h under device tree source folder. The last integer CONFIG is + the pad setting value like pull-up on this pin. Please refer to i.MX8M Quad + Reference Manual for detailed CONFIG settings. + +Examples: + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +iomuxc: pinctrl@30330000 { + compatible = "fsl,imx8mq-iomuxc"; + reg = <0x0 0x30330000 0x0 0x10000>; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + >; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt index ecb5c0d25218..f4d06bb0b55a 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt @@ -17,7 +17,7 @@ Tegra124 adds the following optional properties for pin configuration subnodes. The macros for options are defined in the include/dt-binding/pinctrl/pinctrl-tegra.h. - nvidia,enable-input: Integer. Enable the pin's input path. - enable :TEGRA_PIN_ENABLE0 and + enable :TEGRA_PIN_ENABLE and disable or output only: TEGRA_PIN_DISABLE. - nvidia,open-drain: Integer. enable: TEGRA_PIN_ENABLE. diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt index a62d82d5fbe9..85f211436b8e 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt @@ -44,7 +44,7 @@ Optional subnode-properties: - nvidia,tristate: Integer. 0: drive, 1: tristate. - nvidia,enable-input: Integer. Enable the pin's input path. - enable :TEGRA_PIN_ENABLE0 and + enable :TEGRA_PIN_ENABLE and disable or output only: TEGRA_PIN_DISABLE. - nvidia,open-drain: Integer. enable: TEGRA_PIN_ENABLE. diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index ad9bbbba36e9..cef2b5855d60 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -103,6 +103,12 @@ Optional properties: #pinctrl-cells: Number of pin control cells in addition to the index within the pin controller device instance +pinctrl-use-default: Boolean. Indicates that the OS can use the boot default + pin configuration. This allows using an OS that does not have a + driver for the pin controller. This property can be set either + globally for the pin controller or in child nodes for individual + pin group control. + Pin controller devices should contain the pin configuration nodes that client devices reference. diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt index def8fcad8941..3b695131c51b 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt @@ -16,8 +16,6 @@ If the property interrupt-controller is defined, following property is required - reg-names: A string describing the "reg" entries. Must contain "eint". - interrupts : The interrupt output from the controller. - #interrupt-cells: Should be two. -- interrupt-parent: Phandle of the interrupt parent to which the external - GPIO interrupts are forwarded to. Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices, including the meaning of the diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt index bf76867168e9..4023bad2fe39 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt @@ -25,8 +25,6 @@ Required properties: - gpio-controller: Marks the device as a GPIO controller. Optional properties : -- interrupt-parent: phandle of the parent interrupt controller. - - interrupts: Interrupt specifier for the controllers interrupt. - interrupt-controller: Marks the device as a interrupt controller. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt index a752a4716486..c2dbb3e8d840 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt @@ -10,6 +10,11 @@ Required properties: - #gpio-cells : Should be two. The first cell is the gpio pin number and the second cell is used for optional parameters. +- gpio-ranges: see ../gpio/gpio.txt + +Optional properties: + +- gpio-reserved-ranges: see ../gpio/gpio.txt Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for a general description of GPIO and interrupt bindings. @@ -67,6 +72,7 @@ Example: pinctrl-names = "default"; pinctrl-0 = <&gsbi5_uart_default>; + gpio-ranges = <&msmgpio 0 0 90>; gsbi5_uart_default: gsbi5_uart_default { mux { diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt index c4ea61ac56f2..68e93d5b7ede 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt @@ -40,6 +40,14 @@ MSM8960 platform. Definition: must be 2. Specifying the pin number and flags, as defined in <dt-bindings/gpio/gpio.h> +- gpio-ranges: + Usage: required + Definition: see ../gpio/gpio.txt + +- gpio-reserved-ranges: + Usage: optional + Definition: see ../gpio/gpio.txt + Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for a general description of GPIO and interrupt bindings. @@ -154,6 +162,7 @@ Example: gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 147>; interrupt-controller; #interrupt-cells = <2>; interrupts = <0 208 0>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt index 93374f478b9e..991be0cd0948 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt @@ -13,6 +13,11 @@ Required properties: - #gpio-cells : Should be two. The first cell is the gpio pin number and the second cell is used for optional parameters. +- gpio-ranges: see ../gpio/gpio.txt + +Optional properties: + +- gpio-reserved-ranges: see ../gpio/gpio.txt Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for a general description of GPIO and interrupt bindings. @@ -64,6 +69,7 @@ Example: gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 100>; interrupt-controller; #interrupt-cells = <2>; interrupts = <0 208 0>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt index 6e88e91feb11..7ed56a1b70fc 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt @@ -10,6 +10,11 @@ Required properties: - #gpio-cells : Should be two. The first cell is the gpio pin number and the second cell is used for optional parameters. +- gpio-ranges: see ../gpio/gpio.txt + +Optional properties: + +- gpio-reserved-ranges: see ../gpio/gpio.txt Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for a general description of GPIO and interrupt bindings. @@ -67,6 +72,7 @@ Example: gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 0 69>; interrupt-controller; #interrupt-cells = <2>; interrupts = <0 32 0x4>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt index 407b9443629d..6dd72f8599e9 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt @@ -40,6 +40,14 @@ IPQ8074 platform. Definition: must be 2. Specifying the pin number and flags, as defined in <dt-bindings/gpio/gpio.h> +- gpio-ranges: + Usage: required + Definition: see ../gpio/gpio.txt + +- gpio-reserved-ranges: + Usage: optional + Definition: see ../gpio/gpio.txt + Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for a general description of GPIO and interrupt bindings. @@ -148,6 +156,7 @@ Example: interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 70>; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt index 1b52f01ddcb7..86ecdcfc4fb8 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt @@ -40,6 +40,14 @@ MDM9615 platform. Definition: must be 2. Specifying the pin number and flags, as defined in <dt-bindings/gpio/gpio.h> +- gpio-ranges: + Usage: required + Definition: see ../gpio/gpio.txt + +- gpio-reserved-ranges: + Usage: optional + Definition: see ../gpio/gpio.txt + Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for a general description of GPIO and interrupt bindings. @@ -127,6 +135,7 @@ Example: gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&msmgpio 0 0 88>; interrupt-controller; #interrupt-cells = <2>; interrupts = <0 16 0x4>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt index df9a838ec5f9..cdc4787e59d2 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt @@ -10,6 +10,11 @@ Required properties: - #gpio-cells : Should be two. The first cell is the gpio pin number and the second cell is used for optional parameters. +- gpio-ranges: see ../gpio/gpio.txt + +Optional properties: + +- gpio-reserved-ranges: see ../gpio/gpio.txt Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for a general description of GPIO and interrupt bindings. @@ -62,6 +67,7 @@ Example: gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&msmgpio 0 0 173>; interrupt-controller; #interrupt-cells = <2>; interrupts = <0 16 0x4>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt index 498caff6029e..195a7a0ef0cc 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt @@ -40,6 +40,14 @@ MSM8916 platform. Definition: must be 2. Specifying the pin number and flags, as defined in <dt-bindings/gpio/gpio.h> +- gpio-ranges: + Usage: required + Definition: see ../gpio/gpio.txt + +- gpio-reserved-ranges: + Usage: optional + Definition: see ../gpio/gpio.txt + Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for a general description of GPIO and interrupt bindings. @@ -162,6 +170,7 @@ Example: interrupts = <0 208 0>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 122>; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt index eb8d8aa41f20..5034eb6653c7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt @@ -40,6 +40,14 @@ MSM8960 platform. Definition: must be 2. Specifying the pin number and flags, as defined in <dt-bindings/gpio/gpio.h> +- gpio-ranges: + Usage: required + Definition: see ../gpio/gpio.txt + +- gpio-reserved-ranges: + Usage: optional + Definition: see ../gpio/gpio.txt + Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for a general description of GPIO and interrupt bindings. @@ -156,6 +164,7 @@ Example: gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&msmgpio 0 0 152>; interrupt-controller; #interrupt-cells = <2>; interrupts = <0 16 0x4>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt index 453bd7c76d6b..c22e6c425d0b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt @@ -10,6 +10,11 @@ Required properties: - #gpio-cells : Should be two. The first cell is the gpio pin number and the second cell is used for optional parameters. +- gpio-ranges: see ../gpio/gpio.txt + +Optional properties: + +- gpio-reserved-ranges: see ../gpio/gpio.txt Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for a general description of GPIO and interrupt bindings. @@ -87,6 +92,7 @@ Example: gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&msmgpio 0 0 146>; interrupt-controller; #interrupt-cells = <2>; interrupts = <0 208 0>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt index 13cd629f896e..f15443f6e78e 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt @@ -42,6 +42,14 @@ MSM8994 platform. Definition: must be 2. Specifying the pin number and flags, as defined in <dt-bindings/gpio/gpio.h> +- gpio-ranges: + Usage: required + Definition: see ../gpio/gpio.txt + +- gpio-reserved-ranges: + Usage: optional + Definition: see ../gpio/gpio.txt + Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for a general description of GPIO and interrupt bindings. @@ -160,6 +168,7 @@ Example: interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&msmgpio 0 0 146>; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt index aaf01e929eea..fa97f609fe45 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt @@ -40,6 +40,14 @@ MSM8996 platform. Definition: must be 2. Specifying the pin number and flags, as defined in <dt-bindings/gpio/gpio.h> +- gpio-ranges: + Usage: required + Definition: see ../gpio/gpio.txt + +- gpio-reserved-ranges: + Usage: optional + Definition: see ../gpio/gpio.txt + Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for a general description of GPIO and interrupt bindings. @@ -180,6 +188,7 @@ Example: reg = <0x01010000 0x300000>; interrupts = <0 208 0>; gpio-controller; + gpio-ranges = <&tlmm 0 0 150>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index 5c25fcb29fb5..ffd4345415f3 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -7,6 +7,7 @@ PMIC's from Qualcomm. Usage: required Value type: <string> Definition: must be one of: + "qcom,pm8005-gpio" "qcom,pm8018-gpio" "qcom,pm8038-gpio" "qcom,pm8058-gpio" @@ -15,7 +16,7 @@ PMIC's from Qualcomm. "qcom,pm8921-gpio" "qcom,pm8941-gpio" "qcom,pm8994-gpio" - "qcom,pmi8994-gpio" + "qcom,pm8998-gpio" "qcom,pma8084-gpio" "qcom,pmi8994-gpio" @@ -78,6 +79,7 @@ to specify in a pin configuration subnode: Value type: <string-array> Definition: List of gpio pins affected by the properties specified in this subnode. Valid pins are: + gpio1-gpio4 for pm8005 gpio1-gpio6 for pm8018 gpio1-gpio12 for pm8038 gpio1-gpio40 for pm8058 @@ -86,7 +88,7 @@ to specify in a pin configuration subnode: gpio1-gpio44 for pm8921 gpio1-gpio36 for pm8941 gpio1-gpio22 for pm8994 - gpio1-gpio10 for pmi8994 + gpio1-gpio26 for pm8998 gpio1-gpio22 for pma8084 gpio1-gpio10 for pmi8994 diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index 5e00a21de2bf..70659c917bdc 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt @@ -124,8 +124,6 @@ used as system wakeup events. A. External GPIO Interrupts: For supporting external gpio interrupts, the following properties should be specified in the pin-controller device node. - - interrupt-parent: phandle of the interrupt parent to which the external - GPIO interrupts are forwarded to. - interrupts: interrupt specifier for the controller. The format and value of the interrupt specifier depends on the interrupt parent for the controller. @@ -145,8 +143,13 @@ A. External GPIO Interrupts: For supporting external gpio interrupts, the B. External Wakeup Interrupts: For supporting external wakeup interrupts, a child node representing the external wakeup interrupt controller should be - included in the pin-controller device node. This child node should include - the following properties. + included in the pin-controller device node. + + Only one pin-controller device node can include external wakeup interrupts + child node (in other words, only one External Wakeup Interrupts + pin-controller is supported). + + This child node should include following properties: - compatible: identifies the type of the external wakeup interrupt controller The possible values are: @@ -156,12 +159,12 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a found on Samsung S3C2412 and S3C2413 SoCs, - samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller found on Samsung S3C64xx SoCs, + - samsung,s5pv210-wakeup-eint: represents wakeup interrupt controller + found on Samsung S5Pv210 SoCs, - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller found on Samsung Exynos4210 and S5PC110/S5PV210 SoCs. - samsung,exynos7-wakeup-eint: represents wakeup interrupt controller found on Samsung Exynos7 SoC. - - interrupt-parent: phandle of the interrupt parent to which the external - wakeup interrupts are forwarded to. - interrupts: interrupt used by multiplexed wakeup interrupts. In addition, following properties must be present in node of every bank @@ -181,8 +184,6 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a Node of every bank of pins supporting direct wake-up interrupts (without multiplexing) must contain following properties: - - interrupt-parent: phandle of the interrupt parent to which the external - wakeup interrupts are forwarded to. - interrupts: interrupts of the interrupt parent which are used for external wakeup interrupts from pins of the bank, must contain interrupts for all pins of the bank. diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt index 9a06e1fdbc42..ef4f2ff4a1aa 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt @@ -37,11 +37,10 @@ Required properties: Optional properties: - reset: : Reference to the reset controller - - interrupt-parent: phandle of the interrupt parent to which the external - GPIO interrupts are forwarded to. - - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node - which includes IRQ mux selection register, and the offset of the IRQ mux - selection register. + - st,syscfg: Should be phandle/offset/mask. + -The phandle to the syscon node which includes IRQ mux selection register. + -The offset of the IRQ mux selection register + -The field mask of IRQ mux, needed if different of 0xf. - gpio-ranges: Define a dedicated mapping between a pin-controller and a gpio controller. Format is <&phandle a b c> with: -(phandle): phandle of pin-controller. @@ -55,6 +54,8 @@ Optional properties: NOTE: If "gpio-ranges" is used for a gpio controller, all gpio-controller have to use a "gpio-ranges" entry. More details in Documentation/devicetree/bindings/gpio/gpio.txt. + - st,bank-ioport: should correspond to the EXTI IOport selection (EXTI line + used to select GPIOs as interrupts). Example 1: #include <dt-bindings/pinctrl/stm32f429-pinfunc.h> |
