diff options
| -rw-r--r-- | Documentation/devicetree/bindings/arm/calxeda/combophy.txt | 17 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/ata/ahci-platform.txt | 8 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/ata/pata-arasan.txt | 17 | ||||
| -rw-r--r-- | arch/arm/boot/dts/highbank.dts | 17 | ||||
| -rw-r--r-- | drivers/ata/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/ata/Makefile | 1 | ||||
| -rw-r--r-- | drivers/ata/ahci.h | 16 | ||||
| -rw-r--r-- | drivers/ata/ahci_platform.c | 58 | ||||
| -rw-r--r-- | drivers/ata/libahci.c | 97 | ||||
| -rw-r--r-- | drivers/ata/libata-core.c | 32 | ||||
| -rw-r--r-- | drivers/ata/libata-eh.c | 12 | ||||
| -rw-r--r-- | drivers/ata/libata-scsi.c | 255 | ||||
| -rw-r--r-- | drivers/ata/libata.h | 2 | ||||
| -rw-r--r-- | drivers/ata/pata_arasan_cf.c | 14 | ||||
| -rw-r--r-- | drivers/ata/sata_fsl.c | 39 | ||||
| -rw-r--r-- | drivers/ata/sata_highbank.c | 450 | ||||
| -rw-r--r-- | drivers/ata/sata_mv.c | 8 | ||||
| -rw-r--r-- | include/linux/ata.h | 30 | ||||
| -rw-r--r-- | include/linux/libata.h | 4 |
19 files changed, 1025 insertions, 60 deletions
diff --git a/Documentation/devicetree/bindings/arm/calxeda/combophy.txt b/Documentation/devicetree/bindings/arm/calxeda/combophy.txt new file mode 100644 index 000000000000..6622bdb2e8bc --- /dev/null +++ b/Documentation/devicetree/bindings/arm/calxeda/combophy.txt @@ -0,0 +1,17 @@ +Calxeda Highbank Combination Phys for SATA + +Properties: +- compatible : Should be "calxeda,hb-combophy" +- #phy-cells: Should be 1. +- reg : Address and size for Combination Phy registers. +- phydev: device ID for programming the combophy. + +Example: + + combophy5: combo-phy@fff5d000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff5d000 0x1000>; + phydev = <31>; + }; + diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index 8bb8a76d42e8..147c1f6653fe 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -8,9 +8,17 @@ Required properties: - interrupts : <interrupt mapping for SATA IRQ> - reg : <registers mapping> +Optional properties: +- calxeda,port-phys: phandle-combophy and lane assignment, which maps each + SATA port to a combophy and a lane within that + combophy + Example: sata@ffe08000 { compatible = "calxeda,hb-ahci"; reg = <0xffe08000 0x1000>; interrupts = <115>; + calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1 + &combophy0 2 &combophy0 3>; + }; diff --git a/Documentation/devicetree/bindings/ata/pata-arasan.txt b/Documentation/devicetree/bindings/ata/pata-arasan.txt new file mode 100644 index 000000000000..95ec7f825ede --- /dev/null +++ b/Documentation/devicetree/bindings/ata/pata-arasan.txt @@ -0,0 +1,17 @@ +* ARASAN PATA COMPACT FLASH CONTROLLER + +Required properties: +- compatible: "arasan,cf-spear1340" +- reg: Address range of the CF registers +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupt: Should contain the CF interrupt number + +Example: + + cf@fc000000 { + compatible = "arasan,cf-spear1340"; + reg = <0xfc000000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <12>; + }; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 9fecf1ae777b..5204cf73c2d8 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -121,6 +121,9 @@ compatible = "calxeda,hb-ahci"; reg = <0xffe08000 0x10000>; interrupts = <0 83 4>; + calxeda,port-phys = <&combophy5 0 &combophy0 0 + &combophy0 1 &combophy0 2 + &combophy0 3>; }; sdhci@ffe0e000 { @@ -306,5 +309,19 @@ reg = <0xfff51000 0x1000>; interrupts = <0 80 4 0 81 4 0 82 4>; }; + + combophy0: combo-phy@fff58000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff58000 0x1000>; + phydev = <5>; + }; + + combophy5: combo-phy@fff5d000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff5d000 0x1000>; + phydev = <31>; + }; }; }; diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 27cecd313e75..e08d322d01d7 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -214,6 +214,14 @@ config SATA_DWC_VDEBUG help This option enables the taskfile dumping and NCQ debugging. +config SATA_HIGHBANK + tristate "Calxeda Highbank SATA support" + help + This option enables support for the Calxeda Highbank SoC's + onboard SATA. + + If unsure, say N. + config SATA_MV tristate "Marvell SATA support" help diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index a454a139b1d2..9329dafba91b 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_SATA_FSL) += sata_fsl.o obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o obj-$(CONFIG_SATA_SIL24) += sata_sil24.o obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o +obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o # SFF w/ custom DMA obj-$(CONFIG_PDC_ADMA) += pdc_adma.o diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 57eb1c212a4c..9be471200a07 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -35,6 +35,7 @@ #ifndef _AHCI_H #define _AHCI_H +#include <linux/clk.h> #include <linux/libata.h> /* Enclosure Management Control */ @@ -115,6 +116,9 @@ enum { HOST_CAP2_BOH = (1 << 0), /* BIOS/OS handoff supported */ HOST_CAP2_NVMHCI = (1 << 1), /* NVMHCI supported */ HOST_CAP2_APST = (1 << 2), /* Automatic partial to slumber */ + HOST_CAP2_SDS = (1 << 3), /* Support device sleep */ + HOST_CAP2_SADM = (1 << 4), /* Support aggressive DevSlp */ + HOST_CAP2_DESO = (1 << 5), /* DevSlp from slumber only */ /* registers for each SATA port */ PORT_LST_ADDR = 0x00, /* command list DMA addr */ @@ -133,6 +137,7 @@ enum { PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */ PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */ PORT_FBS = 0x40, /* FIS-based Switching */ + PORT_DEVSLP = 0x44, /* device sleep */ /* PORT_IRQ_{STAT,MASK} bits */ PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */ @@ -186,6 +191,7 @@ enum { PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ + /* PORT_FBS bits */ PORT_FBS_DWE_OFFSET = 16, /* FBS device with error offset */ PORT_FBS_ADO_OFFSET = 12, /* FBS active dev optimization offset */ PORT_FBS_DEV_OFFSET = 8, /* FBS device to issue offset */ @@ -194,6 +200,15 @@ enum { PORT_FBS_DEC = (1 << 1), /* FBS device error clear */ PORT_FBS_EN = (1 << 0), /* Enable FBS */ + /* PORT_DEVSLP bits */ + PORT_DEVSLP_DM_OFFSET = 25, /* DITO multiplier offset */ + PORT_DEVSLP_DM_MASK = (0xf << 25), /* DITO multiplier mask */ + PORT_DEVSLP_DITO_OFFSET = 15, /* DITO offset */ + PORT_DEVSLP_MDAT_OFFSET = 10, /* Minimum assertion time */ + PORT_DEVSLP_DETO_OFFSET = 2, /* DevSlp exit timeout */ + PORT_DEVSLP_DSP = (1 << 1), /* DevSlp present */ + PORT_DEVSLP_ADSE = (1 << 0), /* Aggressive DevSlp enable */ + /* hpriv->flags bits */ #define AHCI_HFLAGS(flags) .private_data = (void *)(flags) @@ -302,6 +317,7 @@ struct ahci_host_priv { u32 em_loc; /* enclosure management location */ u32 em_buf_sz; /* EM buffer size in byte */ u32 em_msg_type; /* EM message type */ + struct clk *clk; /* Only for platforms supporting clk */ }; extern int ahci_ignore_sss; diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 09728e09cb31..b1ae48054dc5 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -12,6 +12,7 @@ * any later version. */ +#include <linux/clk.h> #include <linux/kernel.h> #include <linux/gfp.h> #include <linux/module.h> @@ -118,6 +119,17 @@ static int __init ahci_probe(struct platform_device *pdev) return -ENOMEM; } + hpriv->clk = clk_get(dev, NULL); + if (IS_ERR(hpriv->clk)) { + dev_err(dev, "can't get clock\n"); + } else { + rc = clk_prepare_enable(hpriv->clk); + if (rc) { + dev_err(dev, "clock prepare enable failed"); + goto free_clk; + } + } + /* * Some platforms might need to prepare for mmio region access, * which could be done in the following init call. So, the mmio @@ -127,7 +139,7 @@ static int __init ahci_probe(struct platform_device *pdev) if (pdata && pdata->init) { rc = pdata->init(dev, hpriv->mmio); if (rc) - return rc; + goto disable_unprepare_clk; } ahci_save_initial_config(dev, hpriv, @@ -153,7 +165,7 @@ static int __init ahci_probe(struct platform_device *pdev) host = ata_host_alloc_pinfo(dev, ppi, n_ports); if (!host) { rc = -ENOMEM; - goto err0; + goto pdata_exit; } host->private_data = hpriv; @@ -183,7 +195,7 @@ static int __init ahci_probe(struct platform_device *pdev) rc = ahci_reset_controller(host); if (rc) - goto err0; + goto pdata_exit; ahci_init_controller(host); ahci_print_info(host, "platform"); @@ -191,12 +203,18 @@ static int __init ahci_probe(struct platform_device *pdev) rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED, &ahci_platform_sht); if (rc) - goto err0; + goto pdata_exit; return 0; -err0: +pdata_exit: if (pdata && pdata->exit) pdata->exit(dev); +disable_unprepare_clk: + if (!IS_ERR(hpriv->clk)) + clk_disable_unprepare(hpriv->clk); +free_clk: + if (!IS_ERR(hpriv->clk)) + clk_put(hpriv->clk); return rc; } @@ -205,12 +223,18 @@ static int __devexit ahci_remove(struct platform_device *pdev) struct device *dev = &pdev->dev; struct ahci_platform_data *pdata = dev_get_platdata(dev); struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; ata_host_detach(host); if (pdata && pdata->exit) pdata->exit(dev); + if (!IS_ERR(hpriv->clk)) { + clk_disable_unprepare(hpriv->clk); + clk_put(hpriv->clk); + } + return 0; } @@ -245,6 +269,10 @@ static int ahci_suspend(struct device *dev) if (pdata && pdata->suspend) return pdata->suspend(dev); + + if (!IS_ERR(hpriv->clk)) + clk_disable_unprepare(hpriv->clk); + return 0; } @@ -252,18 +280,27 @@ static int ahci_resume(struct device *dev) { struct ahci_platform_data *pdata = dev_get_platdata(dev); struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; int rc; + if (!IS_ERR(hpriv->clk)) { + rc = clk_prepare_enable(hpriv->clk); + if (rc) { + dev_err(dev, "clock prepare enable failed"); + return rc; + } + } + if (pdata && pdata->resume) { rc = pdata->resume(dev); if (rc) - return rc; + goto disable_unprepare_clk; } if (dev->power.power_state.event == PM_EVENT_SUSPEND) { rc = ahci_reset_controller(host); if (rc) - return rc; + goto disable_unprepare_clk; ahci_init_controller(host); } @@ -271,13 +308,18 @@ static int ahci_resume(struct device *dev) ata_host_resume(host); return 0; + +disable_unprepare_clk: + if (!IS_ERR(hpriv->clk)) + clk_disable_unprepare(hpriv->clk); + + return rc; } #endif SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_suspend, ahci_resume); static const struct of_device_id ahci_of_match[] = { - { .compatible = "calxeda,hb-ahci", }, { .compatible = "snps,spear-ahci", }, {}, }; diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 555c07afa05b..4201e535a8c8 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -45,6 +45,7 @@ #include <scsi/scsi_cmnd.h> #include <linux/libata.h> #include "ahci.h" +#include "libata.h" static int ahci_skip_host_reset; int ahci_ignore_sss; @@ -76,6 +77,7 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc); static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc); static void ahci_freeze(struct ata_port *ap); static void ahci_thaw(struct ata_port *ap); +static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep); static void ahci_enable_fbs(struct ata_port *ap); static void ahci_disable_fbs(struct ata_port *ap); static void ahci_pmp_attach(struct ata_port *ap); @@ -193,6 +195,10 @@ module_param(ahci_em_messages, int, 0444); MODULE_PARM_DESC(ahci_em_messages, "AHCI Enclosure Management Message control (0 = off, 1 = on)"); +int devslp_idle_timeout = 1000; /* device sleep idle timeout in ms */ +module_param(devslp_idle_timeout, int, 0644); +MODULE_PARM_DESC(devslp_idle_timeout, "device sleep idle timeout"); + static void ahci_enable_ahci(void __iomem *mmio) { int i; @@ -702,6 +708,16 @@ static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, } } + /* set aggressive device sleep */ + if ((hpriv->cap2 & HOST_CAP2_SDS) && + (hpriv->cap2 & HOST_CAP2_SADM) && + (link->device->flags & ATA_DFLAG_DEVSLP)) { + if (policy == ATA_LPM_MIN_POWER) + ahci_set_aggressive_devslp(ap, true); + else + ahci_set_aggressive_devslp(ap, false); + } + if (policy == ATA_LPM_MAX_POWER) { sata_link_scr_lpm(link, policy, false); @@ -1890,6 +1906,81 @@ static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) ahci_kick_engine(ap); } +static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep) +{ + void __iomem *port_mmio = ahci_port_base(ap); + struct ata_device *dev = ap->link.device; + u32 devslp, dm, dito, mdat, deto; + int rc; + unsigned int err_mask; + + devslp = readl(port_mmio + PORT_DEVSLP); + if (!(devslp & PORT_DEVSLP_DSP)) { + dev_err(ap->host->dev, "port does not support device sleep\n"); + return; + } + + /* disable device sleep */ + if (!sleep) { + if (devslp & PORT_DEVSLP_ADSE) { + writel(devslp & ~PORT_DEVSLP_ADSE, + port_mmio + PORT_DEVSLP); + err_mask = ata_dev_set_feature(dev, + SETFEATURES_SATA_DISABLE, + SATA_DEVSLP); + if (err_mask && err_mask != AC_ERR_DEV) + ata_dev_warn(dev, "failed to disable DEVSLP\n"); + } + return; + } + + /* device sleep was already enabled */ + if (devslp & PORT_DEVSLP_ADSE) + return; + + /* set DITO, MDAT, DETO and enable DevSlp, need to stop engine first */ + rc = ahci_stop_engine(ap); + if (rc) + return; + + dm = (devslp & PORT_DEVSLP_DM_MASK) >> PORT_DEVSLP_DM_OFFSET; + dito = devslp_idle_timeout / (dm + 1); + if (dito > 0x3ff) + dito = 0x3ff; + + /* Use the nominal value 10 ms if the read MDAT is zero, + * the nominal value of DETO is 20 ms. + */ + if (dev->sata_settings[ATA_LOG_DEVSLP_VALID] & + ATA_LOG_DEVSLP_VALID_MASK) { + mdat = dev->sata_settings[ATA_LOG_DEVSLP_MDAT] & + ATA_LOG_DEVSLP_MDAT_MASK; + if (!mdat) + mdat = 10; + deto = dev->sata_settings[ATA_LOG_DEVSLP_DETO]; + if (!deto) + deto = 20; + } else { + mdat = 10; + deto = 20; + } + + devslp |= ((dito << PORT_DEVSLP_DITO_OFFSET) | + (mdat << PORT_DEVSLP_MDAT_OFFSET) | + (deto << PORT_DEVSLP_DETO_OFFSET) | + PORT_DEVSLP_ADSE); + writel(devslp, port_mmio + PORT_DEVSLP); + + ahci_start_engine(ap); + + /* enable device sleep feature for the drive */ + err_mask = ata_dev_set_feature(dev, + SETFEATURES_SATA_ENABLE, + SATA_DEVSLP); + if (err_mask && err_mask != AC_ERR_DEV) + ata_dev_warn(dev, "failed to enable DEVSLP\n"); +} + static void ahci_enable_fbs(struct ata_port *ap) { struct ahci_port_priv *pp = ap->private_data; @@ -2164,7 +2255,8 @@ void ahci_print_info(struct ata_host *host, const char *scc_s) "flags: " "%s%s%s%s%s%s%s" "%s%s%s%s%s%s%s" - "%s%s%s%s%s%s\n" + "%s%s%s%s%s%s%s" + "%s%s\n" , cap & HOST_CAP_64 ? "64bit " : "", @@ -2184,6 +2276,9 @@ void ahci_print_info(struct ata_host *host, const char *scc_s) cap & HOST_CAP_CCC ? "ccc " : "", cap & HOST_CAP_EMS ? "ems " : "", cap & HOST_CAP_SXS ? "sxs " : "", + cap2 & HOST_CAP2_DESO ? "deso " : "", + cap2 & HOST_CAP2_SADM ? "sadm " : "", + cap2 & HOST_CAP2_SDS ? "sds " : "", cap2 & HOST_CAP2_APST ? "apst " : "", cap2 & HOST_CAP2_NVMHCI ? "nvmp " : "", cap2 & HOST_CAP2_BOH ? "boh " : "" diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 8e1039c8e159..3492aa73d3a6 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -774,7 +774,7 @@ int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, tf->lbam = (block >> 8) & 0xff; tf->lbal = block & 0xff; - tf->device = 1 << 6; + tf->device = ATA_LBA; if (tf->flags & ATA_TFLAG_FUA) tf->device |= 1 << 7; } else if (dev->flags & ATA_DFLAG_LBA) { @@ -2155,6 +2155,7 @@ int ata_dev_configure(struct ata_device *dev) int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; const u16 *id = dev->id; unsigned long xfer_mask; + unsigned int err_mask; char revbuf[7]; /* XYZ-99\0 */ char fwrevbuf[ATA_ID_FW_REV_LEN+1]; char modelbuf[ATA_ID_PROD_LEN+1]; @@ -2323,6 +2324,26 @@ int ata_dev_configure(struct ata_device *dev) } } + /* check and mark DevSlp capability */ + if (ata_id_has_devslp(dev->id)) + dev->flags |= ATA_DFLAG_DEVSLP; + + /* Obtain SATA Settings page from Identify Device Data Log, + * which contains DevSlp timing variables etc. + * Exclude old devices with ata_id_has_ncq() + */ + if (ata_id_has_ncq(dev->id)) { + err_mask = ata_read_log_page(dev, + ATA_LOG_SATA_ID_DEV_DATA, + ATA_LOG_SATA_SETTINGS, + dev->sata_settings, + 1); + if (err_mask) + ata_dev_dbg(dev, + "failed to get Identify Device Data, Emask 0x%x\n", + err_mask); + } + dev->cdb_len = 16; } @@ -2351,8 +2372,6 @@ int ata_dev_configure(struct ata_device *dev) (ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) && (!sata_pmp_attached(ap) || sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) { - unsigned int err_mask; - /* issue SET feature command to turn this on */ err_mask = ata_dev_set_feature(dev, SETFEATURES_SATA_ENABLE, SATA_AN); @@ -3598,7 +3617,7 @@ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, switch (policy) { case ATA_LPM_MAX_POWER: /* disable all LPM transitions */ - scontrol |= (0x3 << 8); + scontrol |= (0x7 << 8); /* initiate transition to active state */ if (spm_wakeup) { scontrol |= (0x4 << 12); @@ -3608,12 +3627,12 @@ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, case ATA_LPM_MED_POWER: /* allow LPM to PARTIAL */ scontrol &= ~(0x1 << 8); - scontrol |= (0x2 << 8); + scontrol |= (0x6 << 8); break; case ATA_LPM_MIN_POWER: if (ata_link_nr_enabled(link) > 0) /* no restrictions on LPM transitions */ - scontrol &= ~(0x3 << 8); + scontrol &= ~(0x7 << 8); else { /* empty port, power off */ scontrol &= ~0xf; @@ -4472,6 +4491,7 @@ unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, u8 feature) DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; } +EXPORT_SYMBOL_GPL(ata_dev_set_feature); /** * ata_dev_init_params - Issue INIT DEV PARAMS command diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 7d4535e989bf..26598941e1b3 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1487,6 +1487,7 @@ static const char *ata_err_string(unsigned int err_mask) /** * ata_read_log_page - read a specific log page * @dev: target device + * @log: log to read * @page: page to read * @buf: buffer to store read page * @sectors: number of sectors to read @@ -1499,17 +1500,18 @@ static const char *ata_err_string(unsigned int err_mask) * RETURNS: * 0 on success, AC_ERR_* mask otherwise. */ -static unsigned int ata_read_log_page(struct ata_device *dev, - u8 page, void *buf, unsigned int sectors) +unsigned int ata_read_log_page(struct ata_device *dev, u8 log, + u8 page, void *buf, unsigned int sectors) { struct ata_taskfile tf; unsigned int err_mask; - DPRINTK("read log page - page %d\n", page); + DPRINTK("read log page - log 0x%x, page 0x%x\n", log, page); ata_tf_init(dev, &tf); tf.command = ATA_CMD_READ_LOG_EXT; - tf.lbal = page; + tf.lbal = log; + tf.lbam = page; tf.nsect = sectors; tf.hob_nsect = sectors >> 8; tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE; @@ -1545,7 +1547,7 @@ static int ata_eh_read_log_10h(struct ata_device *dev, u8 csum; int i; - err_mask = ata_read_log_page(dev, ATA_LOG_SATA_NCQ, buf, 1); + err_mask = ata_read_log_page(dev, ATA_LOG_SATA_NCQ, 0, buf, 1); if (err_mask) return -EIO; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 8ec81ca8f659..e3bda074fa12 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1655,7 +1655,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc) if (unlikely(scmd->cmd_len < 10)) goto invalid_fld; scsi_10_lba_len(cdb, &block, &n_block); - if (unlikely(cdb[1] & (1 << 3))) + if (cdb[1] & (1 << 3)) tf_flags |= ATA_TFLAG_FUA; break; case READ_6: @@ -1675,7 +1675,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc) if (unlikely(scmd->cmd_len < 16)) goto invalid_fld; scsi_16_lba_len(cdb, &block, &n_block); - if (unlikely(cdb[1] & (1 << 3))) + if (cdb[1] & (1 << 3)) tf_flags |= ATA_TFLAG_FUA; break; default: @@ -2205,9 +2205,33 @@ static unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf) } /** + * modecpy - Prepare response for MODE SENSE + * @dest: output buffer + * @src: data being copied + * @n: length of mode page + * @changeable: whether changeable parameters are requested + * + * Generate a generic MODE SENSE page for either current or changeable + * parameters. + * + * LOCKING: + * None. + */ +static void modecpy(u8 *dest, const u8 *src, int n, bool changeable) +{ + if (changeable) { + memcpy(dest, src, 2); + memset(dest + 2, 0, n - 2); + } else { + memcpy(dest, src, n); + } +} + +/** * ata_msense_caching - Simulate MODE SENSE caching info page * @id: device IDENTIFY data * @buf: output buffer + * @changeable: whether changeable parameters are requested * * Generate a caching info page, which conditionally indicates * write caching to the SCSI layer, depending on device @@ -2216,12 +2240,12 @@ static unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf) * LOCKING: * None. */ -static unsigned int ata_msense_caching(u16 *id, u8 *buf) +static unsigned int ata_msense_caching(u16 *id, u8 *buf, bool changeable) { - memcpy(buf, def_cache_mpage, sizeof(def_cache_mpage)); - if (ata_id_wcache_enabled(id)) + modecpy(buf, def_cache_mpage, sizeof(def_cache_mpage), changeable); + if (changeable || ata_id_wcache_enabled(id)) buf[2] |= (1 << 2); /* write cache enable */ - if (!ata_id_rahead_enabled(id)) + if (!changeable && !ata_id_rahead_enabled(id)) buf[12] |= (1 << 5); /* disable read ahead */ return sizeof(def_cache_mpage); } @@ -2229,30 +2253,33 @@ static unsigned int ata_msense_caching(u16 *id, u8 *buf) /** * ata_msense_ctl_mode - Simulate MODE SENSE control mode page * @buf: output buffer + * @changeable: whether changeable parameters are requested * * Generate a generic MODE SENSE control mode page. * * LOCKING: * None. */ -static unsigned int ata_msense_ctl_mode(u8 *buf) +static unsigned int ata_msense_ctl_mode(u8 *buf, bool changeable) { - memcpy(buf, def_control_mpage, sizeof(def_control_mpage)); + modecpy(buf, def_control_mpage, sizeof(def_control_mpage), changeable); return sizeof(def_control_mpage); } /** * ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page * @buf: output buffer + * @changeable: whether changeable parameters are requested * * Generate a generic MODE SENSE r/w error recovery page. * * LOCKING: * None. */ -static unsigned int ata_msense_rw_recovery(u8 *buf) +static unsigned int ata_msense_rw_recovery(u8 *buf, bool changeable) { - memcpy(buf, def_rw_recovery_mpage, sizeof(def_rw_recovery_mpage)); + modecpy(buf, def_rw_recovery_mpage, sizeof(def_rw_recovery_mpage), + changeable); return sizeof(def_rw_recovery_mpage); } @@ -2316,11 +2343,11 @@ static unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf) page_control = scsicmd[2] >> 6; switch (page_control) { case 0: /* current */ + case 1: /* changeable */ + case 2: /* defaults */ break; /* supported */ case 3: /* saved */ goto saving_not_supp; - case 1: /* changeable */ - case 2: /* defaults */ default: goto invalid_fld; } @@ -2341,21 +2368,21 @@ static unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf) switch(pg) { case RW_RECOVERY_MPAGE: - p += ata_msense_rw_recovery(p); + p += ata_msense_rw_recovery(p, page_control == 1); break; case CACHE_MPAGE: - p += ata_msense_caching(args->id, p); + p += ata_msense_caching(args->id, p, page_control == 1); break; case CONTROL_MPAGE: - p += ata_msense_ctl_mode(p); + p += ata_msense_ctl_mode(p, page_control == 1); break; case ALL_MPAGES: - p += ata_msense_rw_recovery(p); - p += ata_msense_caching(args->id, p); - p += ata_msense_ctl_mode(p); + p += ata_msense_rw_recovery(p, page_control == 1); + p += ata_msense_caching(args->id, p, page_control == 1); + p += ata_msense_ctl_mode(p, page_control == 1); break; default: /* invalid page code */ @@ -3080,6 +3107,188 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc) } /** + * ata_mselect_caching - Simulate MODE SELECT for caching info page + * @qc: Storage for translated ATA taskfile + * @buf: input buffer + * @len: number of valid bytes in the input buffer + * + * Prepare a taskfile to modify caching information for the device. + * + * LOCKING: + * None. + */ +static int ata_mselect_caching(struct ata_queued_cmd *qc, + const u8 *buf, int len) +{ + struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; + char mpage[CACHE_MPAGE_LEN]; + u8 wce; + + /* + * The first two bytes of def_cache_mpage are a header, so offsets + * in mpage are off by 2 compared to buf. Same for len. + */ + + if (len != CACHE_MPAGE_LEN - 2) + return -EINVAL; + + wce = buf[0] & (1 << 2); + + /* + * Check that read-only bits are not modified. + */ + ata_msense_caching(dev->id, mpage, false); + mpage[2] &= ~(1 << 2); + mpage[2] |= wce; + if (memcmp(mpage + 2, buf, CACHE_MPAGE_LEN - 2) != 0) + return -EINVAL; + + tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; + tf->protocol = ATA_PROT_NODATA; + tf->nsect = 0; + tf->command = ATA_CMD_SET_FEATURES; + tf->feature = wce ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF; + return 0; +} + +/** + * ata_scsiop_mode_select - Simulate MODE SELECT 6, 10 commands + * @qc: Storage for translated ATA taskfile + * + * Converts a MODE SELECT command to an ATA SET FEATURES taskfile. + * Assume this is invoked for direct access devices (e.g. disks) only. + * There should be no block descriptor for other device types. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static unsigned int ata_scsi_mode_select_xlat(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + const u8 *cdb = scmd->cmnd; + const u8 *p; + u8 pg, spg; + unsigned six_byte, pg_len, hdr_len, bd_len; + int len; + + VPRINTK("ENTER\n"); + + six_byte = (cdb[0] == MODE_SELECT); + if (six_byte) { + if (scmd->cmd_len < 5) + goto invalid_fld; + + len = cdb[4]; + hdr_len = 4; + } else { + if (scmd->cmd_len < 9) + goto invalid_fld; + + len = (cdb[7] << 8) + cdb[8]; + hdr_len = 8; + } + + /* We only support PF=1, SP=0. */ + if ((cdb[1] & 0x11) != 0x10) + goto invalid_fld; + + /* Test early for possible overrun. */ + if (!scsi_sg_count(scmd) || scsi_sglist(scmd)->length < len) + goto invalid_param_len; + + p = page_address(sg_page(scsi_sglist(scmd))); + + /* Move past header and block descriptors. */ + if (len < hdr_len) + goto invalid_param_len; + + if (six_byte) + bd_len = p[3]; + else + bd_len = (p[6] << 8) + p[7]; + + len -= hdr_len; + p += hdr_len; + if (len < bd_len) + goto invalid_param_len; + if (bd_len != 0 && bd_len != 8) + goto invalid_param; + + len -= bd_len; + p += bd_len; + if (len == 0) + goto skip; + + /* Parse both possible formats for the mode page headers. */ + pg = p[0] & 0x3f; + if (p[0] & 0x40) { + if (len < 4) + goto invalid_param_len; + + spg = p[1]; + pg_len = (p[2] << 8) | p[3]; + p += 4; + len -= 4; + } else { + if (len < 2) + goto invalid_param_len; + + spg = 0; + pg_len = p[1]; + p += 2; + len -= 2; + } + + /* + * No mode subpages supported (yet) but asking for _all_ + * subpages may be valid + */ + if (spg && (spg != ALL_SUB_MPAGES)) + goto invalid_param; + if (pg_len > len) + goto invalid_param_len; + + switch (pg) { + case CACHE_MPAGE: + if (ata_mselect_caching(qc, p, pg_len) < 0) + goto invalid_param; + break; + + default: /* invalid page code */ + goto invalid_param; + } + + /* + * Only one page has changeable data, so we only support setting one + * page at a time. + */ + if (len > pg_len) + goto invalid_param; + + return 0; + + invalid_fld: + /* "Invalid field in CDB" */ + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); + return 1; + + invalid_param: + /* "Invalid field in parameter list" */ + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x26, 0x0); + return 1; + + invalid_param_len: + /* "Parameter list length error" */ + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x1a, 0x0); + return 1; + + skip: + scmd->result = SAM_STAT_GOOD; + return 1; +} + +/** * ata_get_xlat_func - check if SCSI to ATA translation is possible * @dev: ATA device * @cmd: SCSI command opcode to consider @@ -3119,6 +3328,11 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) case ATA_16: return ata_scsi_pass_thru; + case MODE_SELECT: + case MODE_SELECT_10: + return ata_scsi_mode_select_xlat; + break; + case START_STOP: return ata_scsi_start_stop_xlat; } @@ -3311,11 +3525,6 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd) ata_scsi_rbuf_fill(&args, ata_scsiop_mode_sense); break; - case MODE_SELECT: /* unconditionally return */ - case MODE_SELECT_10: /* bad-field-in-cdb */ - ata_scsi_invalid_field(cmd); - break; - case READ_CAPACITY: ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); break; diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 50e4dff0604e..7148a58020b9 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -165,6 +165,8 @@ extern void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev, unsigned int action); extern void ata_eh_done(struct ata_link *link, struct ata_device *dev, unsigned int action); +extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log, + u8 page, void *buf, unsigned int sectors); extern void ata_eh_autopsy(struct ata_port *ap); const char *ata_get_cmd_descript(u8 command); extern void ata_eh_report(struct ata_port *ap); diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c index bfaa5cb1629a..26201ebef3ca 100644 --- a/drivers/ata/pata_arasan_cf.c +++ b/drivers/ata/pata_arasan_cf.c @@ -31,6 +31,7 @@ #include <linux/kernel.h> #include <linux/libata.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/pata_arasan_cf_data.h> #include <linux/platform_device.h> #include <linux/pm.h> @@ -310,7 +311,7 @@ static int cf_init(struct arasan_cf_dev *acdev) unsigned long flags; int ret = 0; - ret = clk_enable(acdev->clk); + ret = clk_prepare_enable(acdev->clk); if (ret) { dev_dbg(acdev->host->dev, "clock enable failed"); return ret; @@ -340,7 +341,7 @@ static void cf_exit(struct arasan_cf_dev *acdev) writel(readl(acdev->vbase + OP_MODE) & ~CFHOST_ENB, acdev->vbase + OP_MODE); spin_unlock_irqrestore(&acdev->host->lock, flags); - clk_disable(acdev->clk); + clk_disable_unprepare(acdev->clk); } static void dma_callback(void *dev) @@ -935,6 +936,14 @@ static int arasan_cf_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(arasan_cf_pm_ops, arasan_cf_suspend, arasan_cf_resume); +#ifdef CONFIG_OF +static const struct of_device_id arasan_cf_id_table[] = { + { .compatible = "arasan,cf-spear1340" }, + {} +}; +MODULE_DEVICE_TABLE(of, arasan_cf_id_table); +#endif + static struct platform_driver arasan_cf_driver = { .probe = arasan_cf_probe, .remove = __devexit_p(arasan_cf_remove), @@ -942,6 +951,7 @@ static struct platform_driver arasan_cf_driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, .pm = &arasan_cf_pm_ops, + .of_match_table = of_match_ptr(arasan_cf_id_table), }, }; diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index d6577b93bee3..124b2c1d9c0b 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -123,6 +123,7 @@ enum { ONLINE = (1 << 31), GOING_OFFLINE = (1 << 30), BIST_ERR = (1 << 29), + CLEAR_ERROR = (1 << 27), FATAL_ERR_HC_MASTER_ERR = (1 << 18), FATAL_ERR_PARITY_ERR_TX = (1 << 17), @@ -143,6 +144,7 @@ enum { FATAL_ERR_CRC_ERR_RX | FATAL_ERR_FIFO_OVRFL_TX | FATAL_ERR_FIFO_OVRFL_RX, + INT_ON_DATA_LENGTH_MISMATCH = (1 << 12), INT_ON_FATAL_ERR = (1 << 5), INT_ON_PHYRDY_CHG = (1 << 4), @@ -1181,25 +1183,54 @@ static void sata_fsl_host_intr(struct ata_port *ap) u32 hstatus, done_mask = 0; struct ata_queued_cmd *qc; u32 SError; + u32 tag; + u32 status_mask = INT_ON_ERROR; hstatus = ioread32(hcr_base + HSTATUS); sata_fsl_scr_read(&ap->link, SCR_ERROR, &SError); + /* Read command completed register */ + done_mask = ioread32(hcr_base + CC); + + /* Workaround for data length mismatch errata */ + if (unlikely(hstatus & INT_ON_DATA_LENGTH_MISMATCH)) { + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { + qc = ata_qc_from_tag(ap, tag); + if (qc && ata_is_atapi(qc->tf.protocol)) { + u32 hcontrol; + /* Set HControl[27] to clear error registers */ + hcontrol = ioread32(hcr_base + HCONTROL); + iowrite32(hcontrol | CLEAR_ERROR, + hcr_base + HCONTROL); + + /* Clear HControl[27] */ + iowrite32(hcontrol & ~CLEAR_ERROR, + hcr_base + HCONTROL); + + /* Clear SError[E] bit */ + sata_fsl_scr_write(&ap->link, SCR_ERROR, + SError); + + /* Ignore fatal error and device error */ + status_mask &= ~(INT_ON_SINGL_DEVICE_ERR + | INT_ON_FATAL_ERR); + break; + } + } + } + if (unlikely(SError & 0xFFFF0000)) { DPRINTK("serror @host_intr : 0x%x\n", SError); sata_fsl_error_intr(ap); } - if (unlikely(hstatus & INT_ON_ERROR)) { + if (unlikely(hstatus & status_mask)) { DPRINTK("error interrupt!!\n"); sata_fsl_error_intr(ap); return; } - /* Read command completed register */ - done_mask = ioread32(hcr_base + CC); - VPRINTK("Status of all queues :\n"); VPRINTK("done_mask/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n", done_mask, diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c new file mode 100644 index 000000000000..0d7c4c2cd26f --- /dev/null +++ b/drivers/ata/sata_highbank.c @@ -0,0 +1,450 @@ +/* + * Calxeda Highbank AHCI SATA platform driver + * Copyright 2012 Calxeda, Inc. + * + * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/gfp.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/device.h> +#include <linux/of_device.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/libata.h> +#include <linux/ahci_platform.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/export.h> +#include "ahci.h" + +#define CPHY_MAP(dev, addr) ((((dev) & 0x1f) << 7) | (((addr) >> 9) & 0x7f)) +#define CPHY_ADDR(addr) (((addr) & 0x1ff) << 2) +#define SERDES_CR_CTL 0x80a0 +#define SERDES_CR_ADDR 0x80a1 +#define SERDES_CR_DATA 0x80a2 +#define CR_BUSY 0x0001 +#define CR_START 0x0001 +#define CR_WR_RDN 0x0002 +#define CPHY_RX_INPUT_STS 0x2002 +#define CPHY_SATA_OVERRIDE 0x4000 +#define CPHY_OVERRIDE 0x2005 +#define SPHY_LANE 0x100 +#define SPHY_HALF_RATE 0x0001 +#define CPHY_SATA_DPLL_MODE 0x0700 +#define CPHY_SATA_DPLL_SHIFT 8 +#define CPHY_SATA_DPLL_RESET (1 << 11) +#define CPHY_PHY_COUNT 6 +#define CPHY_LANE_COUNT 4 +#define CPHY_PORT_COUNT (CPHY_PHY_COUNT * CPHY_LANE_COUNT) + +static DEFINE_SPINLOCK(cphy_lock); +/* Each of the 6 phys can have up to 4 sata ports attached to i. Map 0-based + * sata ports to their phys and then to their lanes within the phys + */ +struct phy_lane_info { + void __iomem *phy_base; + u8 lane_mapping; + u8 phy_devs; +}; +static struct phy_lane_info port_data[CPHY_PORT_COUNT]; + +static u32 __combo_phy_reg_read(u8 sata_port, u32 addr) +{ + u32 data; + u8 dev = port_data[sata_port].phy_devs; + spin_lock(&cphy_lock); + writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800); + data = readl(port_data[sata_port].phy_base + CPHY_ADDR(addr)); + spin_unlock(&cphy_lock); + return data; +} + +static void __combo_phy_reg_write(u8 sata_port, u32 addr, u32 data) +{ + u8 dev = port_data[sata_port].phy_devs; + spin_lock(&cphy_lock); + writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800); + writel(data, port_data[sata_port].phy_base + CPHY_ADDR(addr)); + spin_unlock(&cphy_lock); +} + +static void combo_phy_wait_for_ready(u8 sata_port) +{ + while (__combo_phy_reg_read(sata_port, SERDES_CR_CTL) & CR_BUSY) + udelay(5); +} + +static u32 combo_phy_read(u8 sata_port, u32 addr) +{ + combo_phy_wait_for_ready(sata_port); + __combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr); + __combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_START); + combo_phy_wait_for_ready(sata_port); + return __combo_phy_reg_read(sata_port, SERDES_CR_DATA); +} + +static void combo_phy_write(u8 sata_port, u32 addr, u32 data) +{ + combo_phy_wait_for_ready(sata_port); + __combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr); + __combo_phy_reg_write(sata_port, SERDES_CR_DATA, data); + __combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_WR_RDN | CR_START); +} + +static void highbank_cphy_disable_overrides(u8 sata_port) +{ + u8 lane = port_data[sata_port].lane_mapping; + u32 tmp; + if (unlikely(port_data[sata_port].phy_base == NULL)) + return; + tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE); + tmp &= ~CPHY_SATA_OVERRIDE; + combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); +} + +static void cphy_override_rx_mode(u8 sata_port, u32 val) +{ + u8 lane = port_data[sata_port].lane_mapping; + u32 tmp; + tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE); + tmp &= ~CPHY_SATA_OVERRIDE; + combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); + + tmp |= CPHY_SATA_OVERRIDE; + combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); + + tmp &= ~CPHY_SATA_DPLL_MODE; + tmp |= val << CPHY_SATA_DPLL_SHIFT; + combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); + + tmp |= CPHY_SATA_DPLL_RESET; + combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); + + tmp &= ~CPHY_SATA_DPLL_RESET; + combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); + + msleep(15); +} + +static void highbank_cphy_override_lane(u8 sata_port) +{ + u8 lane = port_data[sata_port].lane_mapping; + u32 tmp, k = 0; + + if (unlikely(port_data[sata_port].phy_base == NULL)) + return; + do { + tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + + lane * SPHY_LANE); + } while ((tmp & SPHY_HALF_RATE) && (k++ < 1000)); + cphy_override_rx_mode(sata_port, 3); +} + +static int highbank_initialize_phys(struct device *dev, void __iomem *addr) +{ + struct device_node *sata_node = dev->of_node; + int phy_count = 0, phy, port = 0; + void __iomem *cphy_base[CPHY_PHY_COUNT]; + struct device_node *phy_nodes[CPHY_PHY_COUNT]; + memset(port_data, 0, sizeof(struct phy_lane_info) * CPHY_PORT_COUNT); + memset(phy_nodes, 0, sizeof(struct device_node*) * CPHY_PHY_COUNT); + + do { + u32 tmp; + struct of_phandle_args phy_data; + if (of_parse_phandle_with_args(sata_node, + "calxeda,port-phys", "#phy-cells", + port, &phy_data)) + break; + for (phy = 0; phy < phy_count; phy++) { + if (phy_nodes[phy] == phy_data.np) + break; + } + if (phy_nodes[phy] == NULL) { + phy_nodes[phy] = phy_data.np; + cphy_base[phy] = of_iomap(phy_nodes[phy], 0); + if (cphy_base[phy] == NULL) { + return 0; + } + phy_count += 1; + } + port_data[port].lane_mapping = phy_data.args[0]; + of_property_read_u32(phy_nodes[phy], "phydev", &tmp); + port_data[port].phy_devs = tmp; + port_data[port].phy_base = cphy_base[phy]; + of_node_put(phy_data.np); + port += 1; + } while (port < CPHY_PORT_COUNT); + return 0; +} + +static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + struct ata_taskfile tf; + bool online; + u32 sstatus; + int rc; + int retry = 10; + + ahci_stop_engine(ap); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); + tf.command = 0x80; + ata_tf_to_fis(&tf, 0, 0, d2h_fis); + + do { + highbank_cphy_disable_overrides(link->ap->port_no); + rc = sata_link_hardreset(link, timing, deadline, &online, NULL); + highbank_cphy_override_lane(link->ap->port_no); + + /* If the status is 1, we are connected, but the link did not + * come up. So retry resetting the link again. + */ + if (sata_scr_read(link, SCR_STATUS, &sstatus)) + break; + if (!(sstatus & 0x3)) + break; + } while (!online && retry--); + + ahci_start_engine(ap); + + if (online) + *class = ahci_dev_classify(ap); + + return rc; +} + +static struct ata_port_operations ahci_highbank_ops = { + .inherits = &ahci_ops, + .hardreset = ahci_highbank_hardreset, +}; + +static const struct ata_port_info ahci_highbank_port_info = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_highbank_ops, +}; + +static struct scsi_host_template ahci_highbank_platform_sht = { + AHCI_SHT("highbank-ahci"), +}; + +static const struct of_device_id ahci_of_match[] = { + { .compatible = "calxeda,hb-ahci" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ahci_of_match); + +static int __init ahci_highbank_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ahci_host_priv *hpriv; + struct ata_host *host; + struct resource *mem; + int irq; + int n_ports; + int i; + int rc; + struct ata_port_info pi = ahci_highbank_port_info; + const struct ata_port_info *ppi[] = { &pi, NULL }; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(dev, "no mmio space\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(dev, "no irq\n"); + return -EINVAL; + } + + hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) { + dev_err(dev, "can't alloc ahci_host_priv\n"); + return -ENOMEM; + } + + hpriv->flags |= (unsigned long)pi.private_data; + + hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem)); + if (!hpriv->mmio) { + dev_err(dev, "can't map %pR\n", mem); + return -ENOMEM; + } + + rc = highbank_initialize_phys(dev, hpriv->mmio); + if (rc) + return rc; + + + ahci_save_initial_config(dev, hpriv, 0, 0); + + /* prepare host */ + if (hpriv->cap & HOST_CAP_NCQ) + pi.flags |= ATA_FLAG_NCQ; + + if (hpriv->cap & HOST_CAP_PMP) + pi.flags |= ATA_FLAG_PMP; + + ahci_set_em_messages(hpriv, &pi); + + /* CAP.NP sometimes indicate the index of the last enabled + * port, at other times, that of the last possible port, so + * determining the maximum port number requires looking at + * both CAP.NP and port_map. + */ + n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); + + host = ata_host_alloc_pinfo(dev, ppi, n_ports); + if (!host) { + rc = -ENOMEM; + goto err0; + } + + host->private_data = hpriv; + + if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) + host->flags |= ATA_HOST_PARALLEL_SCAN; + + if (pi.flags & ATA_FLAG_EM) + ahci_reset_em(host); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + ata_port_desc(ap, "mmio %pR", mem); + ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80); + + /* set enclosure management message type */ + if (ap->flags & ATA_FLAG_EM) + ap->em_message_type = hpriv->em_msg_type; + + /* disabled/not-implemented port */ + if (!(hpriv->port_map & (1 << i))) + ap->ops = &ata_dummy_port_ops; + } + + rc = ahci_reset_controller(host); + if (rc) + goto err0; + + ahci_init_controller(host); + ahci_print_info(host, "platform"); + + rc = ata_host_activate(host, irq, ahci_interrupt, 0, + &ahci_highbank_platform_sht); + if (rc) + goto err0; + + return 0; +err0: + return rc; +} + +static int __devexit ahci_highbank_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ata_host *host = dev_get_drvdata(dev); + + ata_host_detach(host); + + return 0; +} + +#ifdef CONFIG_PM +static int ahci_highbank_suspend(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->mmio; + u32 ctl; + int rc; + + if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { + dev_err(dev, "firmware update required for suspend/resume\n"); + return -EIO; + } + + /* + * AHCI spec rev1.1 section 8.3.3: + * Software must disable interrupts prior to requesting a + * transition of the HBA to D3 state. + */ + ctl = readl(mmio + HOST_CTL); + ctl &= ~HOST_IRQ_EN; + writel(ctl, mmio + HOST_CTL); + readl(mmio + HOST_CTL); /* flush */ + + rc = ata_host_suspend(host, PMSG_SUSPEND); + if (rc) + return rc; + + return 0; +} + +static int ahci_highbank_resume(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + int rc; + + if (dev->power.power_state.event == PM_EVENT_SUSPEND) { + rc = ahci_reset_controller(host); + if (rc) + return rc; + + ahci_init_controller(host); + } + + ata_host_resume(host); + + return 0; +} +#endif + +SIMPLE_DEV_PM_OPS(ahci_highbank_pm_ops, + ahci_highbank_suspend, ahci_highbank_resume); + +static struct platform_driver ahci_highbank_driver = { + .remove = __devexit_p(ahci_highbank_remove), + .driver = { + .name = "highbank-ahci", + .owner = THIS_MODULE, + .of_match_table = ahci_of_match, + .pm = &ahci_highbank_pm_ops, + }, + .probe = ahci_highbank_probe, +}; + +module_platform_driver(ahci_highbank_driver); + +MODULE_DESCRIPTION("Calxeda Highbank AHCI SATA platform driver"); +MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@calxeda.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("sata:highbank"); diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 311be18d3f03..68f4fb54d627 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -79,8 +79,8 @@ * module options */ -static int msi; #ifdef CONFIG_PCI +static int msi; module_param(msi, int, S_IRUGO); MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)"); #endif @@ -652,12 +652,13 @@ static u8 mv_sff_check_status(struct ata_port *ap); * because we have to allow room for worst case splitting of * PRDs for 64K boundaries in mv_fill_sg(). */ +#ifdef CONFIG_PCI static struct scsi_host_template mv5_sht = { ATA_BASE_SHT(DRV_NAME), .sg_tablesize = MV_MAX_SG_CT / 2, .dma_boundary = MV_DMA_BOUNDARY, }; - +#endif static struct scsi_host_template mv6_sht = { ATA_NCQ_SHT(DRV_NAME), .can_queue = MV_MAX_Q_DEPTH - 1, @@ -1252,7 +1253,7 @@ static void mv_dump_mem(void __iomem *start, unsigned bytes) } } #endif - +#if defined(ATA_DEBUG) || defined(CONFIG_PCI) static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes) { #ifdef ATA_DEBUG @@ -1269,6 +1270,7 @@ static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes) } #endif } +#endif static void mv_dump_all_regs(void __iomem *mmio_base, int port, struct pci_dev *pdev) { diff --git a/include/linux/ata.h b/include/linux/ata.h index 5713d3ac381a..408da9502177 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -77,6 +77,9 @@ enum { ATA_ID_EIDE_PIO_IORDY = 68, ATA_ID_ADDITIONAL_SUPP = 69, ATA_ID_QUEUE_DEPTH = 75, + ATA_ID_SATA_CAPABILITY = 76, + ATA_ID_SATA_CAPABILITY_2 = 77, + ATA_ID_FEATURE_SUPP = 78, ATA_ID_MAJOR_VER = 80, ATA_ID_COMMAND_SET_1 = 82, ATA_ID_COMMAND_SET_2 = 83, @@ -292,6 +295,13 @@ enum { /* READ_LOG_EXT pages */ ATA_LOG_SATA_NCQ = 0x10, + ATA_LOG_SATA_ID_DEV_DATA = 0x30, + ATA_LOG_SATA_SETTINGS = 0x08, + ATA_LOG_DEVSLP_MDAT = 0x30, + ATA_LOG_DEVSLP_MDAT_MASK = 0x1F, + ATA_LOG_DEVSLP_DETO = 0x31, + ATA_LOG_DEVSLP_VALID = 0x37, + ATA_LOG_DEVSLP_VALID_MASK = 0x80, /* READ/WRITE LONG (obsolete) */ ATA_CMD_READ_LONG = 0x22, @@ -345,6 +355,7 @@ enum { SATA_FPDMA_IN_ORDER = 0x04, /* FPDMA in-order data delivery */ SATA_AN = 0x05, /* Asynchronous Notification */ SATA_SSP = 0x06, /* Software Settings Preservation */ + SATA_DEVSLP = 0x09, /* Device Sleep */ /* feature values for SET_MAX */ ATA_SET_MAX_ADDR = 0x00, @@ -558,15 +569,17 @@ static inline int ata_is_data(u8 prot) #define ata_id_is_ata(id) (((id)[ATA_ID_CONFIG] & (1 << 15)) == 0) #define ata_id_has_lba(id) ((id)[ATA_ID_CAPABILITY] & (1 << 9)) #define ata_id_has_dma(id) ((id)[ATA_ID_CAPABILITY] & (1 << 8)) -#define ata_id_has_ncq(id) ((id)[76] & (1 << 8)) +#define ata_id_has_ncq(id) ((id)[ATA_ID_SATA_CAPABILITY] & (1 << 8)) #define ata_id_queue_depth(id) (((id)[ATA_ID_QUEUE_DEPTH] & 0x1f) + 1) #define ata_id_removeable(id) ((id)[ATA_ID_CONFIG] & (1 << 7)) #define ata_id_has_atapi_AN(id) \ - ( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \ - ((id)[78] & (1 << 5)) ) + ((((id)[ATA_ID_SATA_CAPABILITY] != 0x0000) && \ + ((id)[ATA_ID_SATA_CAPABILITY] != 0xffff)) && \ + ((id)[ATA_ID_FEATURE_SUPP] & (1 << 5))) #define ata_id_has_fpdma_aa(id) \ - ( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \ - ((id)[78] & (1 << 2)) ) + ((((id)[ATA_ID_SATA_CAPABILITY] != 0x0000) && \ + ((id)[ATA_ID_SATA_CAPABILITY] != 0xffff)) && \ + ((id)[ATA_ID_FEATURE_SUPP] & (1 << 2))) #define ata_id_iordy_disable(id) ((id)[ATA_ID_CAPABILITY] & (1 << 10)) #define ata_id_has_iordy(id) ((id)[ATA_ID_CAPABILITY] & (1 << 11)) #define ata_id_u32(id,n) \ @@ -578,11 +591,12 @@ static inline int ata_is_data(u8 prot) ((u64) (id)[(n) + 0]) ) #define ata_id_cdb_intr(id) (((id)[ATA_ID_CONFIG] & 0x60) == 0x20) -#define ata_id_has_da(id) ((id)[77] & (1 << 4)) +#define ata_id_has_da(id) ((id)[ATA_ID_SATA_CAPABILITY_2] & (1 << 4)) +#define ata_id_has_devslp(id) ((id)[ATA_ID_FEATURE_SUPP] & (1 << 8)) static inline bool ata_id_has_hipm(const u16 *id) { - u16 val = id[76]; + u16 val = id[ATA_ID_SATA_CAPABILITY]; if (val == 0 || val == 0xffff) return false; @@ -592,7 +606,7 @@ static inline bool ata_id_has_hipm(const u16 *id) static inline bool ata_id_has_dipm(const u16 *id) { - u16 val = id[78]; + u16 val = id[ATA_ID_FEATURE_SUPP]; if (val == 0 || val == 0xffff) return false; diff --git a/include/linux/libata.h b/include/linux/libata.h index 64f90e17e51d..464e67c2e77a 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -162,6 +162,7 @@ enum { ATA_DFLAG_DETACHED = (1 << 25), ATA_DFLAG_DA = (1 << 26), /* device supports Device Attention */ + ATA_DFLAG_DEVSLP = (1 << 27), /* device supports Device Sleep */ ATA_DEV_UNKNOWN = 0, /* unknown device */ ATA_DEV_ATA = 1, /* ATA device */ @@ -649,6 +650,9 @@ struct ata_device { u32 gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */ }; + /* Identify Device Data Log (30h), SATA Settings (page 08h) */ + u8 sata_settings[ATA_SECT_SIZE]; + /* error history */ int spdn_cnt; /* ering is CLEAR_END, read comment above CLEAR_END */ |
