summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/admin-guide/kernel-parameters.txt2
-rw-r--r--drivers/usb/core/hub.c14
-rw-r--r--drivers/usb/core/quirks.c14
-rw-r--r--drivers/usb/host/xhci-histb.c6
-rw-r--r--drivers/usb/host/xhci-hub.c6
-rw-r--r--drivers/usb/host/xhci-mtk.c6
-rw-r--r--drivers/usb/host/xhci-pci.c6
-rw-r--r--drivers/usb/host/xhci-plat.c6
-rw-r--r--drivers/usb/host/xhci-ring.c45
-rw-r--r--drivers/usb/host/xhci-tegra.c1
-rw-r--r--drivers/usb/host/xhci.c2
-rw-r--r--drivers/usb/host/xhci.h3
-rw-r--r--drivers/usb/misc/appledisplay.c1
-rw-r--r--include/linux/usb/quirks.h3
14 files changed, 98 insertions, 17 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 81d1d5a74728..19f4423e70d9 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4713,6 +4713,8 @@
prevent spurious wakeup);
n = USB_QUIRK_DELAY_CTRL_MSG (Device needs a
pause after every control message);
+ o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra
+ delay after resetting its port);
Example: quirks=0781:5580:bk,0a5c:5834:gij
usbhid.mousepoll=
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index c6077d582d29..d9bd7576786a 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2794,6 +2794,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
int i, status;
u16 portchange, portstatus;
struct usb_port *port_dev = hub->ports[port1 - 1];
+ int reset_recovery_time;
if (!hub_is_superspeed(hub->hdev)) {
if (warm) {
@@ -2885,11 +2886,18 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
done:
if (status == 0) {
- /* TRSTRCY = 10 ms; plus some extra */
if (port_dev->quirks & USB_PORT_QUIRK_FAST_ENUM)
usleep_range(10000, 12000);
- else
- msleep(10 + 40);
+ else {
+ /* TRSTRCY = 10 ms; plus some extra */
+ reset_recovery_time = 10 + 40;
+
+ /* Hub needs extra delay after resetting its port. */
+ if (hub->hdev->quirks & USB_QUIRK_HUB_SLOW_RESET)
+ reset_recovery_time += 100;
+
+ msleep(reset_recovery_time);
+ }
if (udev) {
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 178d6c6063c0..f9ff03e6af93 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -128,6 +128,9 @@ static int quirks_param_set(const char *val, const struct kernel_param *kp)
case 'n':
flags |= USB_QUIRK_DELAY_CTRL_MSG;
break;
+ case 'o':
+ flags |= USB_QUIRK_HUB_SLOW_RESET;
+ break;
/* Ignore unrecognized flag characters */
}
}
@@ -380,6 +383,9 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x1a0a, 0x0200), .driver_info =
USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
+ /* Terminus Technology Inc. Hub */
+ { USB_DEVICE(0x1a40, 0x0101), .driver_info = USB_QUIRK_HUB_SLOW_RESET },
+
/* Corsair K70 RGB */
{ USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT },
@@ -391,6 +397,9 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT |
USB_QUIRK_DELAY_CTRL_MSG },
+ /* Corsair K70 LUX RGB */
+ { USB_DEVICE(0x1b1c, 0x1b33), .driver_info = USB_QUIRK_DELAY_INIT },
+
/* Corsair K70 LUX */
{ USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT },
@@ -411,6 +420,11 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x2040, 0x7200), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
+ /* Raydium Touchscreen */
+ { USB_DEVICE(0x2386, 0x3114), .driver_info = USB_QUIRK_NO_LPM },
+
+ { USB_DEVICE(0x2386, 0x3119), .driver_info = USB_QUIRK_NO_LPM },
+
/* DJI CineSSD */
{ USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
diff --git a/drivers/usb/host/xhci-histb.c b/drivers/usb/host/xhci-histb.c
index 27f00160332e..3c4abb5a1c3f 100644
--- a/drivers/usb/host/xhci-histb.c
+++ b/drivers/usb/host/xhci-histb.c
@@ -325,14 +325,16 @@ static int xhci_histb_remove(struct platform_device *dev)
struct xhci_hcd_histb *histb = platform_get_drvdata(dev);
struct usb_hcd *hcd = histb->hcd;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct usb_hcd *shared_hcd = xhci->shared_hcd;
xhci->xhc_state |= XHCI_STATE_REMOVING;
- usb_remove_hcd(xhci->shared_hcd);
+ usb_remove_hcd(shared_hcd);
+ xhci->shared_hcd = NULL;
device_wakeup_disable(&dev->dev);
usb_remove_hcd(hcd);
- usb_put_hcd(xhci->shared_hcd);
+ usb_put_hcd(shared_hcd);
xhci_histb_host_disable(histb);
usb_put_hcd(hcd);
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 12eea73d9f20..da98a11244e2 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -876,7 +876,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
status |= USB_PORT_STAT_SUSPEND;
}
if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME &&
- !DEV_SUPERSPEED_ANY(raw_port_status)) {
+ !DEV_SUPERSPEED_ANY(raw_port_status) && hcd->speed < HCD_USB3) {
if ((raw_port_status & PORT_RESET) ||
!(raw_port_status & PORT_PE))
return 0xffffffff;
@@ -921,7 +921,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
time_left = wait_for_completion_timeout(
&bus_state->rexit_done[wIndex],
msecs_to_jiffies(
- XHCI_MAX_REXIT_TIMEOUT));
+ XHCI_MAX_REXIT_TIMEOUT_MS));
spin_lock_irqsave(&xhci->lock, flags);
if (time_left) {
@@ -935,7 +935,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
} else {
int port_status = readl(port->addr);
xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n",
- XHCI_MAX_REXIT_TIMEOUT,
+ XHCI_MAX_REXIT_TIMEOUT_MS,
port_status);
status |= USB_PORT_STAT_SUSPEND;
clear_bit(wIndex, &bus_state->rexit_ports);
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 71d0d33c3286..60987c787e44 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -590,12 +590,14 @@ static int xhci_mtk_remove(struct platform_device *dev)
struct xhci_hcd_mtk *mtk = platform_get_drvdata(dev);
struct usb_hcd *hcd = mtk->hcd;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct usb_hcd *shared_hcd = xhci->shared_hcd;
- usb_remove_hcd(xhci->shared_hcd);
+ usb_remove_hcd(shared_hcd);
+ xhci->shared_hcd = NULL;
device_init_wakeup(&dev->dev, false);
usb_remove_hcd(hcd);
- usb_put_hcd(xhci->shared_hcd);
+ usb_put_hcd(shared_hcd);
usb_put_hcd(hcd);
xhci_mtk_sch_exit(mtk);
xhci_mtk_clks_disable(mtk);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 01c57055c0c5..a9515265db4d 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -248,6 +248,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241)
xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7;
+ if ((pdev->vendor == PCI_VENDOR_ID_BROADCOM ||
+ pdev->vendor == PCI_VENDOR_ID_CAVIUM) &&
+ pdev->device == 0x9026)
+ xhci->quirks |= XHCI_RESET_PLL_ON_DISCONNECT;
+
if (xhci->quirks & XHCI_RESET_ON_RESUME)
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"QUIRK: Resetting on resume");
@@ -380,6 +385,7 @@ static void xhci_pci_remove(struct pci_dev *dev)
if (xhci->shared_hcd) {
usb_remove_hcd(xhci->shared_hcd);
usb_put_hcd(xhci->shared_hcd);
+ xhci->shared_hcd = NULL;
}
/* Workaround for spurious wakeups at shutdown with HSW */
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 32b5574ad5c5..ef09cb06212f 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -362,14 +362,16 @@ static int xhci_plat_remove(struct platform_device *dev)
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct clk *clk = xhci->clk;
struct clk *reg_clk = xhci->reg_clk;
+ struct usb_hcd *shared_hcd = xhci->shared_hcd;
xhci->xhc_state |= XHCI_STATE_REMOVING;
- usb_remove_hcd(xhci->shared_hcd);
+ usb_remove_hcd(shared_hcd);
+ xhci->shared_hcd = NULL;
usb_phy_shutdown(hcd->usb_phy);
usb_remove_hcd(hcd);
- usb_put_hcd(xhci->shared_hcd);
+ usb_put_hcd(shared_hcd);
clk_disable_unprepare(clk);
clk_disable_unprepare(reg_clk);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index a8d92c90fb58..65750582133f 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1521,6 +1521,35 @@ static void handle_device_notification(struct xhci_hcd *xhci,
usb_wakeup_notification(udev->parent, udev->portnum);
}
+/*
+ * Quirk hanlder for errata seen on Cavium ThunderX2 processor XHCI
+ * Controller.
+ * As per ThunderX2errata-129 USB 2 device may come up as USB 1
+ * If a connection to a USB 1 device is followed by another connection
+ * to a USB 2 device.
+ *
+ * Reset the PHY after the USB device is disconnected if device speed
+ * is less than HCD_USB3.
+ * Retry the reset sequence max of 4 times checking the PLL lock status.
+ *
+ */
+static void xhci_cavium_reset_phy_quirk(struct xhci_hcd *xhci)
+{
+ struct usb_hcd *hcd = xhci_to_hcd(xhci);
+ u32 pll_lock_check;
+ u32 retry_count = 4;
+
+ do {
+ /* Assert PHY reset */
+ writel(0x6F, hcd->regs + 0x1048);
+ udelay(10);
+ /* De-assert the PHY reset */
+ writel(0x7F, hcd->regs + 0x1048);
+ udelay(200);
+ pll_lock_check = readl(hcd->regs + 0x1070);
+ } while (!(pll_lock_check & 0x1) && --retry_count);
+}
+
static void handle_port_status(struct xhci_hcd *xhci,
union xhci_trb *event)
{
@@ -1556,6 +1585,13 @@ static void handle_port_status(struct xhci_hcd *xhci,
goto cleanup;
}
+ /* We might get interrupts after shared_hcd is removed */
+ if (port->rhub == &xhci->usb3_rhub && xhci->shared_hcd == NULL) {
+ xhci_dbg(xhci, "ignore port event for removed USB3 hcd\n");
+ bogus_port_status = true;
+ goto cleanup;
+ }
+
hcd = port->rhub->hcd;
bus_state = &xhci->bus_state[hcd_index(hcd)];
hcd_portnum = port->hcd_portnum;
@@ -1639,7 +1675,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
* RExit to a disconnect state). If so, let the the driver know it's
* out of the RExit state.
*/
- if (!DEV_SUPERSPEED_ANY(portsc) &&
+ if (!DEV_SUPERSPEED_ANY(portsc) && hcd->speed < HCD_USB3 &&
test_and_clear_bit(hcd_portnum,
&bus_state->rexit_ports)) {
complete(&bus_state->rexit_done[hcd_portnum]);
@@ -1647,8 +1683,12 @@ static void handle_port_status(struct xhci_hcd *xhci,
goto cleanup;
}
- if (hcd->speed < HCD_USB3)
+ if (hcd->speed < HCD_USB3) {
xhci_test_and_clear_bit(xhci, port, PORT_PLC);
+ if ((xhci->quirks & XHCI_RESET_PLL_ON_DISCONNECT) &&
+ (portsc & PORT_CSC) && !(portsc & PORT_CONNECT))
+ xhci_cavium_reset_phy_quirk(xhci);
+ }
cleanup:
/* Update event ring dequeue pointer before dropping the lock */
@@ -2266,6 +2306,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
goto cleanup;
case COMP_RING_UNDERRUN:
case COMP_RING_OVERRUN:
+ case COMP_STOPPED_LENGTH_INVALID:
goto cleanup;
default:
xhci_err(xhci, "ERROR Transfer event for unknown stream ring slot %u ep %u\n",
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index 6b5db344de30..938ff06c0349 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -1303,6 +1303,7 @@ static int tegra_xusb_remove(struct platform_device *pdev)
usb_remove_hcd(xhci->shared_hcd);
usb_put_hcd(xhci->shared_hcd);
+ xhci->shared_hcd = NULL;
usb_remove_hcd(tegra->hcd);
usb_put_hcd(tegra->hcd);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 0420eefa647a..c928dbbff881 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -719,8 +719,6 @@ static void xhci_stop(struct usb_hcd *hcd)
/* Only halt host and free memory after both hcds are removed */
if (!usb_hcd_is_primary_hcd(hcd)) {
- /* usb core will free this hcd shortly, unset pointer */
- xhci->shared_hcd = NULL;
mutex_unlock(&xhci->mutex);
return;
}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index bf0b3692dc9a..260b259b72bc 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1680,7 +1680,7 @@ struct xhci_bus_state {
* It can take up to 20 ms to transition from RExit to U0 on the
* Intel Lynx Point LP xHCI host.
*/
-#define XHCI_MAX_REXIT_TIMEOUT (20 * 1000)
+#define XHCI_MAX_REXIT_TIMEOUT_MS 20
static inline unsigned int hcd_index(struct usb_hcd *hcd)
{
@@ -1849,6 +1849,7 @@ struct xhci_hcd {
#define XHCI_INTEL_USB_ROLE_SW BIT_ULL(31)
#define XHCI_ZERO_64B_REGS BIT_ULL(32)
#define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33)
+#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
unsigned int num_active_eps;
unsigned int limit_active_eps;
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index bd539f3058bc..85b48c6ddc7e 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -50,6 +50,7 @@ static const struct usb_device_id appledisplay_table[] = {
{ APPLEDISPLAY_DEVICE(0x9219) },
{ APPLEDISPLAY_DEVICE(0x921c) },
{ APPLEDISPLAY_DEVICE(0x921d) },
+ { APPLEDISPLAY_DEVICE(0x9222) },
{ APPLEDISPLAY_DEVICE(0x9236) },
/* Terminating entry */
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index b7a99ce56bc9..a1be64c9940f 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -66,4 +66,7 @@
/* Device needs a pause after every control message. */
#define USB_QUIRK_DELAY_CTRL_MSG BIT(13)
+/* Hub needs extra delay after resetting its port. */
+#define USB_QUIRK_HUB_SLOW_RESET BIT(14)
+
#endif /* __LINUX_USB_QUIRKS_H */
OpenPOWER on IntegriCloud