blackbird-obmc-linux/kernel/sched, branch dev-5.0-raptor-04-16-2019

sched/core: Use READ_ONCE()/WRITE_ONCE() in move_queued_task()/task_rq_lock()

2019-04-05T20:34:43+00:00

[ Upstream commit c546951d9c9300065bad253ecdf1ac59ce9d06c8 ] move_queued_task() synchronizes with task_rq_lock() as follows: move_queued_task() task_rq_lock() [S] ->on_rq = MIGRATING [L] rq = task_rq() WMB (__set_task_cpu()) ACQUIRE (rq->lock); [S] ->cpu = new_cpu [L] ->on_rq where "[L] rq = task_rq()" is ordered before "ACQUIRE (rq->lock)" by an address dependency and, in turn, "ACQUIRE (rq->lock)" is ordered before "[L] ->on_rq" by the ACQUIRE itself. Use READ_ONCE() to load ->cpu in task_rq() (c.f., task_cpu()) to honor this address dependency. Also, mark the accesses to ->cpu and ->on_rq with READ_ONCE()/WRITE_ONCE() to comply with the LKMM. Signed-off-by: Andrea Parri Signed-off-by: Peter Zijlstra (Intel) Cc: Alan Stern Cc: Linus Torvalds Cc: Mike Galbraith Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Will Deacon Link: https://lkml.kernel.org/r/20190121155240.27173-1-andrea.parri@amarulasolutions.com Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin

sched/debug: Initialize sd_sysctl_cpus if !CONFIG_CPUMASK_OFFSTACK

2019-04-05T20:34:43+00:00

[ Upstream commit 1ca4fa3ab604734e38e2a3000c9abf788512ffa7 ] register_sched_domain_sysctl() copies the cpu_possible_mask into sd_sysctl_cpus, but only if sd_sysctl_cpus hasn't already been allocated (ie, CONFIG_CPUMASK_OFFSTACK is set). However, when CONFIG_CPUMASK_OFFSTACK is not set, sd_sysctl_cpus is left uninitialized (all zeroes) and the kernel may fail to initialize sched_domain sysctl entries for all possible CPUs. This is visible to the user if the kernel is booted with maxcpus=n, or if ACPI tables have been modified to leave CPUs offline, and then checking for missing /proc/sys/kernel/sched_domain/cpu* entries. Fix this by separating the allocation and initialization, and adding a flag to initialize the possible CPU entries while system booting only. Tested-by: Syuuichirou Ishii Tested-by: Tarumizu, Kohei Signed-off-by: Hidetoshi Seto Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Masayoshi Mizuma Acked-by: Joe Lawrence Cc: Linus Torvalds Cc: Masayoshi Mizuma Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Link: https://lkml.kernel.org/r/20190129151245.5073-1-msys.mizuma@gmail.com Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin

sched/topology: Fix percpu data types in struct sd_data & struct s_data

2019-04-05T20:34:40+00:00

[ Upstream commit 99687cdbb3f6c8e32bcc7f37496e811f30460e48 ] The percpu members of struct sd_data and s_data are declared as: struct ... ** __percpu member; So their type is: __percpu pointer to pointer to struct ... But looking at how they're used, their type should be: pointer to __percpu pointer to struct ... and they should thus be declared as: struct ... * __percpu *member; So fix the placement of '__percpu' in the definition of these structures. This addresses a bunch of Sparse's warnings like: warning: incorrect type in initializer (different address spaces) expected void const [noderef] *__vpp_verify got struct sched_domain ** Signed-off-by: Luc Van Oostenryck Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: https://lkml.kernel.org/r/20190118144936.79158-1-luc.vanoostenryck@gmail.com Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin

psi: avoid divide-by-zero crash inside virtual machines

2019-02-21T17:01:00+00:00

We've been seeing hard-to-trigger psi crashes when running inside VM instances: divide error: 0000 [#1] SMP PTI Modules linked in: [...] CPU: 0 PID: 212 Comm: kworker/0:2 Not tainted 4.16.18-119_fbk9_3817_gfe944c98d695 #119 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 Workqueue: events psi_clock RIP: 0010:psi_update_stats+0x270/0x490 RSP: 0018:ffffc90001117e10 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8800a35a13f8 RDX: 0000000000000000 RSI: ffff8800a35a1340 RDI: 0000000000000000 RBP: 0000000000000658 R08: ffff8800a35a1470 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 00000000000f8502 FS: 0000000000000000(0000) GS:ffff88023fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fbe370fa000 CR3: 00000000b1e3a000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: psi_clock+0x12/0x50 process_one_work+0x1e0/0x390 worker_thread+0x2b/0x3c0 ? rescuer_thread+0x330/0x330 kthread+0x113/0x130 ? kthread_create_worker_on_cpu+0x40/0x40 ? SyS_exit_group+0x10/0x10 ret_from_fork+0x35/0x40 Code: 48 0f 47 c7 48 01 c2 45 85 e4 48 89 16 0f 85 e6 00 00 00 4c 8b 49 10 4c 8b 51 08 49 69 d9 f2 07 00 00 48 6b c0 64 4c 8b 29 31 d2 <48> f7 f7 49 69 d5 8d 06 00 00 48 89 c5 4c 69 f0 00 98 0b 00 48 The Code-line points to `period` being 0 inside update_stats(), and we divide by that when calculating that period's pressure percentage. The elapsed period should never be 0. The reason this can happen is due to an off-by-one in the idle time / missing period calculation combined with a coarse sched_clock() in the virtual machine. The target time for aggregation is advanced into the future on a fixed grid to prevent clock drift. So when an aggregation runs after some idle period, we can not just set it to "now + psi_period", but have to calculate the downtime and advance the target time relative to itself. However, if the aggregator was disabled exactly one psi_period (ns), we drop one idle period in the calculation due to a > when we should do >=. In that case, next_update will be advanced from 'now - psi_period' to 'now' when it should be moved to 'now + psi_period'. The run finishes with last_update == next_update == sched_clock(). With hardware clocks, this exact nanosecond match isn't likely in the first place; but if it does happen, the clock will still have moved on and the period non-zero by the time the worker runs. A pointlessly short period, but besides the extra work, no harm no foul. However, a slow sched_clock() like we have on VMs might not have advanced either by the time the worker runs again. And when we calculate the elapsed period, the result, our pressure divisor, will be 0. Ouch. Fix this by correctly handling the situation when the elapsed time between aggregation runs is precisely two periods, and advance the expiration timestamp correctly to period into the future. Link: http://lkml.kernel.org/r/20190214193157.15788-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner Reported-by: Łukasz Siudut Cc: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2019-02-03T17:02:03+00:00

Pull cpu hotplug fixes from Thomas Gleixner: "Two fixes for the cpu hotplug machinery: - Replace the overly clever 'SMT disabled by BIOS' detection logic as it breaks KVM scenarios and prevents speculation control updates when the Hyperthreads are brought online late after boot. - Remove a redundant invocation of the speculation control update function" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Fix "SMT disabled by BIOS" detection for KVM x86/speculation: Remove redundant arch_smt_update() invocation

psi: fix aggregation idle shut-off

2019-02-01T23:46:23+00:00

psi has provisions to shut off the periodic aggregation worker when there is a period of no task activity - and thus no data that needs aggregating. However, while developing psi monitoring, Suren noticed that the aggregation clock currently won't stay shut off for good. Debugging this revealed a flaw in the idle design: an aggregation run will see no task activity and decide to go to sleep; shortly thereafter, the kworker thread that executed the aggregation will go idle and cause a scheduling change, during which the psi callback will kick the !pending worker again. This will ping-pong forever, and is equivalent to having no shut-off logic at all (but with more code!) Fix this by exempting aggregation workers from psi's clock waking logic when the state change is them going to sleep. To do this, tag workers with the last work function they executed, and if in psi we see a worker going to sleep after aggregating psi data, we will not reschedule the aggregation work item. What if the worker is also executing other items before or after? Any psi state times that were incurred by work items preceding the aggregation work will have been collected from the per-cpu buckets during the aggregation itself. If there are work items following the aggregation work, the worker's last_func tag will be overwritten and the aggregator will be kept alive to process this genuine new activity. If the aggregation work is the last thing the worker does, and we decide to go idle, the brief period of non-idle time incurred between the aggregation run and the kworker's dequeue will be stranded in the per-cpu buckets until the clock is woken by later activity. But that should not be a problem. The buckets can hold 4s worth of time, and future activity will wake the clock with a 2s delay, giving us 2s worth of data we can leave behind when disabling aggregation. If it takes a worker more than two seconds to go idle after it finishes its last work item, we likely have bigger problems in the system, and won't notice one sample that was averaged with a bogus per-CPU weight. Link: http://lkml.kernel.org/r/20190116193501.1910-1-hannes@cmpxchg.org Fixes: eb414681d5a0 ("psi: pressure stall information for CPU, memory, and IO") Signed-off-by: Johannes Weiner Reported-by: Suren Baghdasaryan Acked-by: Tejun Heo Cc: Peter Zijlstra Cc: Lai Jiangshan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

cpu/hotplug: Fix "SMT disabled by BIOS" detection for KVM

2019-01-30T18:27:00+00:00

With the following commit: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") ... the hotplug code attempted to detect when SMT was disabled by BIOS, in which case it reported SMT as permanently disabled. However, that code broke a virt hotplug scenario, where the guest is booted with only primary CPU threads, and a sibling is brought online later. The problem is that there doesn't seem to be a way to reliably distinguish between the HW "SMT disabled by BIOS" case and the virt "sibling not yet brought online" case. So the above-mentioned commit was a bit misguided, as it permanently disabled SMT for both cases, preventing future virt sibling hotplugs. Going back and reviewing the original problems which were attempted to be solved by that commit, when SMT was disabled in BIOS: 1) /sys/devices/system/cpu/smt/control showed "on" instead of "notsupported"; and 2) vmx_vm_init() was incorrectly showing the L1TF_MSG_SMT warning. I'd propose that we instead consider #1 above to not actually be a problem. Because, at least in the virt case, it's possible that SMT wasn't disabled by BIOS and a sibling thread could be brought online later. So it makes sense to just always default the smt control to "on" to allow for that possibility (assuming cpuid indicates that the CPU supports SMT). The real problem is #2, which has a simple fix: change vmx_vm_init() to query the actual current SMT state -- i.e., whether any siblings are currently online -- instead of looking at the SMT "control" sysfs value. So fix it by: a) reverting the original "fix" and its followup fix: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") bc2d8d262cba ("cpu/hotplug: Fix SMT supported evaluation") and b) changing vmx_vm_init() to query the actual current SMT state -- instead of the sysfs control value -- to determine whether the L1TF warning is needed. This also requires the 'sched_smt_present' variable to exported, instead of 'cpu_smt_control'. Fixes: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") Reported-by: Igor Mammedov Signed-off-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Cc: Joe Mario Cc: Jiri Kosina Cc: Peter Zijlstra Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/e3a85d585da28cc333ecbc1e78ee9216e6da9396.1548794349.git.jpoimboe@redhat.com

sched/wake_q: Fix wakeup ordering for wake_q

2019-01-21T10:15:37+00:00

Notable cmpxchg() does not provide ordering when it fails, however wake_q_add() requires ordering in this specific case too. Without this it would be possible for the concurrent wakeup to not observe our prior state. Andrea Parri provided: C wake_up_q-wake_q_add { int next = 0; int y = 0; } P0(int *next, int *y) { int r0; /* in wake_up_q() */ WRITE_ONCE(*next, 1); /* node->next = NULL */ smp_mb(); /* implied by wake_up_process() */ r0 = READ_ONCE(*y); } P1(int *next, int *y) { int r1; /* in wake_q_add() */ WRITE_ONCE(*y, 1); /* wake_cond = true */ smp_mb__before_atomic(); r1 = cmpxchg_relaxed(next, 1, 2); } exists (0:r0=0 /\ 1:r1=0) This "exists" clause cannot be satisfied according to the LKMM: Test wake_up_q-wake_q_add Allowed States 3 0:r0=0; 1:r1=1; 0:r0=1; 1:r1=0; 0:r0=1; 1:r1=1; No Witnesses Positive: 0 Negative: 3 Condition exists (0:r0=0 /\ 1:r1=0) Observation wake_up_q-wake_q_add Never 0 3 Reported-by: Yongji Xie Signed-off-by: Peter Zijlstra (Intel) Cc: Davidlohr Bueso Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Waiman Long Cc: Will Deacon Signed-off-by: Ingo Molnar

sched/wake_q: Document wake_q_add()

2019-01-21T10:15:36+00:00

The only guarantee provided by wake_q_add() is that a wakeup will happen after it, it does _NOT_ guarantee the wakeup will be delayed until the matching wake_up_q(). If wake_q_add() fails the cmpxchg() a concurrent wakeup is pending and that can happen at any time after the cmpxchg(). This means we should not rely on the wakeup happening at wake_q_up(), but should be ready for wake_q_add() to issue the wakeup. The delay; if provided (most likely); should only result in more efficient behaviour. Reported-by: Yongji Xie Signed-off-by: Peter Zijlstra (Intel) Cc: Davidlohr Bueso Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Waiman Long Cc: Will Deacon Signed-off-by: Ingo Molnar

jump_label: move 'asm goto' support test to Kconfig

2019-01-06T00:46:51+00:00

Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label". The jump label is controlled by HAVE_JUMP_LABEL, which is defined like this: #if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL) # define HAVE_JUMP_LABEL #endif We can improve this by testing 'asm goto' support in Kconfig, then make JUMP_LABEL depend on CC_HAS_ASM_GOTO. Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will match to the real kernel capability. Signed-off-by: Masahiro Yamada Acked-by: Michael Ellerman (powerpc) Tested-by: Sedat Dilek