Blackbird™ Linux sources for OpenBMC https://git.raptorcs.com/git/blackbird-obmc-linux/atom?h=dev-5.0-raptor-04-16-2019 2019-03-20T04:43:33+00:00 2019-03-20T04:43:33+00:00 Jae Hyun Yoo jae.hyun.yoo@linux.intel.com 2018-12-19T00:02:27+00:00 urn:sha1:16e45c190ffdac3668ba28561e3513ec085941cb This commit adds driver implementation for PECI bus core into linux driver framework. PECI (Platform Environment Control Interface) is a one-wire bus interface that provides a communication channel from Intel processors and chipset components to external monitoring or control devices. PECI is designed to support the following sideband functions: * Processor and DRAM thermal management - Processor fan speed control is managed by comparing Digital Thermal Sensor (DTS) thermal readings acquired via PECI against the processor-specific fan speed control reference point, or TCONTROL. Both TCONTROL and DTS thermal readings are accessible via the processor PECI client. These variables are referenced to a common temperature, the TCC activation point, and are both defined as negative offsets from that reference. - PECI based access to the processor package configuration space provides a means for Baseboard Management Controllers (BMC) or other platform management devices to actively manage the processor and memory power and thermal features. * Platform Manageability - Platform manageability functions including thermal, power, and error monitoring. Note that platform 'power' management includes monitoring and control for both the processor and DRAM subsystem to assist with data center power limiting. - PECI allows read access to certain error registers in the processor MSR space and status monitoring registers in the PCI configuration space within the processor and downstream devices. - PECI permits writes to certain registers in the processor PCI configuration space. * Processor Interface Tuning and Diagnostics - Processor interface tuning and diagnostics capabilities (Intel Interconnect BIST). The processors Intel Interconnect Built In Self Test (Intel IBIST) allows for infield diagnostic capabilities in the Intel UPI and memory controller interfaces. PECI provides a port to execute these diagnostics via its PCI Configuration read and write capabilities. * Failure Analysis - Output the state of the processor after a failure for analysis via Crashdump. PECI uses a single wire for self-clocking and data transfer. The bus requires no additional control lines. The physical layer is a self-clocked one-wire bus that begins each bit with a driven, rising edge from an idle level near zero volts. The duration of the signal driven high depends on whether the bit value is a logic '0' or logic '1'. PECI also includes variable data transfer rate established with every message. In this way, it is highly flexible even though underlying logic is simple. The interface design was optimized for interfacing between an Intel processor and chipset components in both single processor and multiple processor environments. The single wire interface provides low board routing overhead for the multiple load connections in the congested routing area near the processor and chipset components. Bus speed, error checking, and low protocol overhead provides adequate link bandwidth and reliability to transfer critical device operating conditions and configuration information. This implementation provides the basic framework to add PECI extensions to the Linux bus and device models. A hardware specific 'Adapter' driver can be attached to the PECI bus to provide sideband functions described above. It is also possible to access all devices on an adapter from userspace through the /dev interface. A device specific 'Client' driver also can be attached to the PECI bus so each processor client's features can be supported by the 'Client' driver through an adapter connection in the bus. OpenBMC-Staging-Count: 2 Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com> Reviewed-by: James Feist <james.feist@linux.intel.com> Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com> [joel: Fix access_ok usage for 5.0] Signed-off-by: Joel Stanley <joel@jms.id.au> 2019-03-10T06:08:57+00:00 Todd Kjos tkjos@android.com 2019-01-14T17:10:21+00:00 urn:sha1:ed1776bb5d0b38dc134de0487c06f8080cde0b8d commit ec74136ded792deed80780a2f8baf3521eeb72f9 upstream. To allow servers to verify client identity, allow a node flag to be set that causes the sender's security context to be delivered with the transaction. The BR_TRANSACTION command is extended in BR_TRANSACTION_SEC_CTX to contain a pointer to the security context string. Signed-off-by: Todd Kjos <tkjos@google.com> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2019-02-12T18:35:57+00:00 Konstantin Khlebnikov khlebnikov@yandex-team.ru 2019-02-09T10:35:52+00:00 urn:sha1:1ec17dbd90f8b638f41ee650558609c1af63dfa0 Field idiag_ext in struct inet_diag_req_v2 used as bitmap of requested extensions has only 8 bits. Thus extensions starting from DCTCPINFO cannot be requested directly. Some of them included into response unconditionally or hook into some of lower 8 bits. Extension INET_DIAG_CLASS_ID has not way to request from the beginning. This patch bundle it with INET_DIAG_TCLASS (ipv6 tos), fixes space reservation, and documents behavior for other extensions. Also this patch adds fallback to reporting socket priority. This filed is more widely used for traffic classification because ipv4 sockets automatically maps TOS to priority and default qdisc pfifo_fast knows about that. But priority could be changed via setsockopt SO_PRIORITY so INET_DIAG_TOS isn't enough for predicting class. Also cgroup2 obsoletes net_cls classid (it always zero), but we cannot reuse this field for reporting cgroup2 id because it is 64-bit (ino+gen). So, after this patch INET_DIAG_CLASS_ID will report socket priority for most common setup when net_cls isn't set and/or cgroup2 in use. Fixes: 0888e372c37f ("net: inet: diag: expose sockets cgroup classid") Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net> 2019-02-07T08:05:28+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-02-07T08:05:28+00:00 urn:sha1:b0314565da2b95e73feab484467ad171fcce6dff Pull virtio fixes from Michael Tsirkin: "A small fix for a uapi header, and a fix for VDPA for non-x86 guests" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio: drop internal struct from UAPI virtio: support VIRTIO_F_ORDER_PLATFORM 2019-02-05T20:29:48+00:00 Michael S. Tsirkin mst@redhat.com 2019-02-01T22:13:57+00:00 urn:sha1:9c0644ee4aa8792f1e60a2b014b4710faaddafeb There's no reason to expose struct vring_packed in UAPI - if we do we won't be able to change or drop it, and it's not part of any interface. Let's move it to virtio_ring.c Cc: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 2019-01-27T17:07:03+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-01-27T17:07:03+00:00 urn:sha1:78e372e6509bc2412e86afb11be65185f4c9c568 Pull input fixes from Dmitry Torokhov: "A fixup for the input_event fix for y2038 Sparc64, and couple other minor fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: input_event - fix the CONFIG_SPARC64 mixup Input: olpc_apsp - assign priv->dev earlier Input: uinput - fix undefined behavior in uinput_validate_absinfo() Input: raspberrypi-ts - fix link error Input: xpad - add support for SteelSeries Stratus Duo Input: input_event - provide override for sparc64 2019-01-26T20:42:41+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-01-26T20:42:41+00:00 urn:sha1:6b8f9159166545e576b2bc8a0c984beaeae9cc05 Pull block fixes from Jens Axboe: "A collection of fixes for this release. This contains: - Silence sparse rightfully complaining about non-static wbt functions (Bart) - Fixes for the zoned comments/ioctl documentation (Damien) - direct-io fix that's been lingering for a while (Ernesto) - cgroup writeback fix (Tejun) - Set of NVMe patches for nvme-rdma/tcp (Sagi, Hannes, Raju) - Block recursion tracking fix (Ming) - Fix debugfs command flag naming for a few flags (Jianchao)" * tag 'for-linus-20190125' of git://git.kernel.dk/linux-block: block: Fix comment typo uapi: fix ioctl documentation blk-wbt: Declare local functions static blk-mq: fix the cmd_flag_name array nvme-multipath: drop optimization for static ANA group IDs nvmet-rdma: fix null dereference under heavy load nvme-rdma: rework queue maps handling nvme-tcp: fix timeout handler nvme-rdma: fix timeout handler writeback: synchronize sync(2) against cgroup writeback membership switches block: cover another queue enter recursion via BIO_QUEUE_ENTERED direct-io: allow direct writes to empty inodes 2019-01-25T23:03:34+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-01-25T23:03:34+00:00 urn:sha1:d488bd21a4b2bf6b3f236f22ed213c61e74c878b Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes to resolve some reported issues, as well as a number of binderfs fixups that were found after auditing the filesystem code by Al Viro. As binderfs hasn't been in a previous release yet, it's good to get these in now before the first users show up. All of these have been in linux-next for a bit with no reported issues" * tag 'char-misc-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits) i3c: master: Fix an error checking typo in 'cdns_i3c_master_probe()' binderfs: switch from d_add() to d_instantiate() binderfs: drop lock in binderfs_binder_ctl_create binderfs: kill_litter_super() before cleanup binderfs: rework binderfs_binder_device_create() binderfs: rework binderfs_fill_super() binderfs: prevent renaming the control dentry binderfs: remove outdated comment binderfs: use __u32 for device numbers binderfs: use correct include guards in header misc: pvpanic: fix warning implicit declaration char/mwave: fix potential Spectre v1 vulnerability misc: ibmvsm: Fix potential NULL pointer dereference binderfs: fix error return code in binderfs_fill_super() mei: me: add denverton innovation engine device IDs mei: me: mark LBG devices as having dma support mei: dma: silent the reject message binderfs: handle !CONFIG_IPC_NS builds binderfs: reserve devices for initial mount binderfs: rename header to binderfs.h ... 2019-01-24T18:11:42+00:00 Damien Le Moal damien.lemoal@wdc.com 2019-01-24T09:20:13+00:00 urn:sha1:745815f955f65f22d378d69822da11043d00aaff The description of the BLKGETNRZONES zoned block device ioctl was not added as a comment together with this ioctl definition in commit 65e4e3eee83d7 ("block: Introduce BLKGETNRZONES ioctl"). Add its description here. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 2019-01-24T15:15:42+00:00 Tiwei Bie tiwei.bie@intel.com 2019-01-23T09:50:26+00:00 urn:sha1:45383fb0f42db3945ac6cc658704706cdae19528 This patch introduces the support for VIRTIO_F_ORDER_PLATFORM. If this feature is negotiated, the driver must use the barriers suitable for hardware devices. Otherwise, the device and driver are assumed to be implemented in software, that is they can be assumed to run on identical CPUs in an SMP configuration. Thus a weaker form of memory barriers is sufficient to yield better performance. It is recommended that an add-in card based PCI device offers this feature for portability. The device will fail to operate further or will operate in a slower emulation mode if this feature is offered but not accepted. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>