blackbird-obmc-linux/drivers/gpu, branch dev-5.0-raptor-04-16-2019

drm/aspeed: Add DVO output option to GFX driver

2019-05-02T21:04:17+00:00

The AST2500 offers an alternate GFX output mode over DVO. Enable DVO or VGA output mode conditionally based on two new device tree properties, output-vga and output-dvo. Signed-off-by: Timothy Pearson

drm/aspeed: Preserve DVO configuration bits during initialization

2019-05-02T20:54:16+00:00

GFX064 contains DVO enable and mode bits. These are hardware specific, configured via the pinmux from the DT, and should not be cleared during startup. Signed-off-by: Timothy Pearson

Merge tag 'v5.0.7' into dev-5.0

2019-04-08T03:05:05+00:00

This is the 5.0.7 stable release Signed-off-by: Joel Stanley

drm/dp/mst: Configure no_stop_bit correctly for remote i2c xfers

2019-04-05T20:34:53+00:00

[ Upstream commit c978ae9bde582e82a04c63a4071701691dd8b35c ] We aren't supposed to force a stop+start between every i2c msg when performing multi message transfers. This should eg. cause the DDC segment address to be reset back to 0 between writing the segment address and reading the actual EDID extension block. To quote the E-DDC spec: "... this standard requires that the segment pointer be reset to 00h when a NO ACK or a STOP condition is received." Since we're going to touch this might as well consult the I2C_M_STOP flag to determine whether we want to force the stop or not. Cc: Brian Vincent References: https://bugs.freedesktop.org/show_bug.cgi?id=108081 Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-1-ville.syrjala@linux.intel.com Reviewed-by: Dhinakaran Pandiyan Signed-off-by: Sasha Levin

drm: Reorder set_property_atomic to avoid returning with an active ww_ctx

2019-04-05T20:34:53+00:00

[ Upstream commit 227ad6d957898a88b1746e30234ece64d305f066 ] Delay the drm_modeset_acquire_init() until after we check for an allocation failure so that we can return immediately upon error without having to unwind. WARNING: lock held when returning to user space! 4.20.0+ #174 Not tainted ------------------------------------------------ syz-executor556/8153 is leaving the kernel with locks still held! 1 lock held by syz-executor556/8153: #0: 000000005100c85c (crtc_ww_class_acquire){+.+.}, at: set_property_atomic+0xb3/0x330 drivers/gpu/drm/drm_mode_object.c:462 Reported-by: syzbot+6ea337c427f5083ebdf2@syzkaller.appspotmail.com Fixes: 144a7999d633 ("drm: Handle properties in the core for atomic drivers") Signed-off-by: Chris Wilson Cc: Daniel Vetter Cc: Maarten Lankhorst Cc: Sean Paul Cc: David Airlie Cc: # v4.14+ Reviewed-by: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/20181230122842.21917-1-chris@chris-wilson.co.uk Signed-off-by: Sasha Levin

drm/fb-helper: fix leaks in error path of drm_fb_helper_fbdev_setup

2019-04-05T20:34:52+00:00

[ Upstream commit 00eb5b0da8d27b3c944bfc959c3344d665caae26 ] After drm_fb_helper_fbdev_setup calls drm_fb_helper_init, "dev->fb_helper" will be initialized (and thus drm_fb_helper_fini will have some effect). After that, drm_fb_helper_initial_config is called which may call the "fb_probe" driver callback. This driver callback may call drm_fb_helper_defio_init (as is done by drm_fb_helper_generic_probe) or set a framebuffer (as is done by bochs) as documented. These are normally cleaned up on exit by drm_fb_helper_fbdev_teardown which also calls drm_fb_helper_fini. If an error occurs after "fb_probe", but before setup is complete, then calling just drm_fb_helper_fini will leak resources. This was triggered by df2052cc922 ("bochs: convert to drm_fb_helper_fbdev_setup/teardown"): [ 50.008030] bochsdrmfb: enable CONFIG_FB_LITTLE_ENDIAN to support this framebuffer [ 50.009436] bochs-drm 0000:00:02.0: [drm:drm_fb_helper_fbdev_setup] *ERROR* fbdev: Failed to set configuration (ret=-38) [ 50.011456] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 2 [ 50.013604] WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_mode_config.c:477 drm_mode_config_cleanup+0x280/0x2a0 [ 50.016175] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G T 4.20.0-rc7 #1 [ 50.017732] EIP: drm_mode_config_cleanup+0x280/0x2a0 ... [ 50.023155] Call Trace: [ 50.023155] ? bochs_kms_fini+0x1e/0x30 [ 50.023155] ? bochs_unload+0x18/0x40 This can be reproduced with QEMU and CONFIG_FB_LITTLE_ENDIAN=n. Link: https://lkml.kernel.org/r/20181221083226.GI23332@shao2-debian Link: https://lkml.kernel.org/r/20181223004315.GA11455@al Fixes: 8741216396b2 ("drm/fb-helper: Add drm_fb_helper_fbdev_setup/teardown()") Reported-by: kernel test robot Cc: Noralf Trønnes Signed-off-by: Peter Wu Reviewed-by: Noralf Trønnes Signed-off-by: Noralf Trønnes Link: https://patchwork.freedesktop.org/patch/msgid/20181223005507.28328-1-peter@lekensteyn.nl Signed-off-by: Sasha Levin

drm/nouveau: Stop using drm_crtc_force_disable

2019-04-05T20:34:51+00:00

[ Upstream commit 934c5b32a5e43d8de2ab4f1566f91d7c3bf8cb64 ] The correct way for legacy drivers to update properties that need to do a full modeset, is to do a full modeset. Note that we don't need to call the drm_mode_config_internal helper because we're not changing any of the refcounted paramters. v2: Fixup error handling (Ville). Since the old code didn't bother I decided to just delete it instead of adding even more code for just error handling. Cc: Ville Syrjälä Reviewed-by: Alex Deucher (v1) Cc: Sean Paul Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-2-daniel.vetter@ffwll.ch Signed-off-by: Sasha Levin

drm: Auto-set allow_fb_modifiers when given modifiers at plane init

2019-04-05T20:34:51+00:00

[ Upstream commit 890880ddfdbe256083170866e49c87618b706ac7 ] When drivers pass non-empty lists of modifiers for initializing their planes, we can infer that they allow framebuffer modifiers and set the driver's allow_fb_modifiers mode config element. In case the allow_fb_modifiers element was not set (some drivers tend to set them after registering planes), the modifiers will still be registered but won't be available to userspace unless the flag is set later. However in that case, the IN_FORMATS blob won't be created. In order to avoid this case and generally reduce the trouble associated with the flag, always set allow_fb_modifiers when a non-empty list of format modifiers is passed at plane init. Reviewed-by: Daniel Vetter Signed-off-by: Paul Kocialkowski Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20190104085610.5829-1-paul.kocialkowski@bootlin.com Signed-off-by: Sasha Levin

drm/amd/display: Enable vblank interrupt during CRC capture

2019-04-05T20:34:46+00:00

[ Upstream commit 428da2bdb05d76c48d0bd8fbfa2e4c102685be08 ] [Why] In order to read CRC events when CRC capture is enabled the vblank interrput handler needs to be running for the CRTC. The handler is enabled while there is an active vblank reference. When running IGT tests there will often be no active vblank reference but the test expects to read a CRC value. This is valid usage (and works on i915 since they have a CRC interrupt handler) so the reference to the vblank should be grabbed while capture is active. This issue was found running: igt@kms_plane_multiple@atomic-pipe-b-tiling-none The pipe-b is the only one in the initial commit and was not previously active so no vblank reference is grabbed. The vblank interrupt is not enabled and the test times out. [How] Keep a reference to the vblank as long as CRC capture is enabled. If userspace never explicitly disables it then the reference is also dropped when removing the CRTC from the context (stream = NULL). Signed-off-by: Nicholas Kazlauskas Reviewed-by: Harry Wentland Reviewed-by: Sun peng Li Acked-by: Leo Li Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/msm/dpu: Convert to a chained irq chip

2019-04-05T20:34:44+00:00

[ Upstream commit 070e64dc1bbc879b7e0e9fffccd9dd139baf89f0 ] Devices that make up DPU, i.e. graphics card, request their interrupts from this "virtual" interrupt chip. The interrupt chip builds upon a GIC SPI interrupt that raises high when any of the interrupts in the DPU's irq status register are triggered. From the kernel's perspective this is a chained irq chip, so requesting a flow handler for the GIC SPI and then calling generic IRQ handling code from that irq handler is not completely proper. It's better to convert this to a chained irq so that the GIC SPI irq doesn't appear in /proc/interrupts, can't have CPU affinity changed, and won't be accounted for with irq stats. Doing this also silences a recursive lockdep warning because we can specify a different lock class for the chained interrupts, silencing a warning that is easy to see with 'threadirqs' on the kernel commandline. WARNING: inconsistent lock state 4.19.10 #76 Tainted: G W -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. irq/40-dpu_mdss/203 [HC0[0]:SC0[2]:HE1:SE0] takes: 0000000053ea9021 (&irq_desc_lock_class){?.-.}, at: handle_level_irq+0x34/0x26c {IN-HARDIRQ-W} state was registered at: lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_fasteoi_irq+0x54/0x2ec generic_handle_irq+0x44/0x5c __handle_domain_irq+0x9c/0x11c gic_handle_irq+0x208/0x260 el1_irq+0xb4/0x130 arch_cpu_idle+0x178/0x3cc default_idle_call+0x3c/0x54 do_idle+0x1a8/0x3dc cpu_startup_entry+0x24/0x28 rest_init+0x240/0x270 start_kernel+0x5a8/0x6bc irq event stamp: 18 hardirqs last enabled at (17): [] _raw_spin_unlock_irq+0x40/0xc0 hardirqs last disabled at (16): [] __schedule+0x20c/0x1bbc softirqs last enabled at (0): [] copy_process+0xb50/0x3964 softirqs last disabled at (18): [] local_bh_disable+0x8/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** no locks held by irq/40-dpu_mdss/203. stack backtrace: CPU: 0 PID: 203 Comm: irq/40-dpu_mdss Tainted: G W 4.19.10 #76 Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0xcc/0x10c mark_lock+0xbe0/0xe24 __lock_acquire+0x4cc/0x2708 lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_level_irq+0x34/0x26c generic_handle_irq+0x44/0x5c dpu_mdss_irq+0x64/0xec irq_forced_thread_fn+0x58/0x9c irq_thread+0x120/0x1dc kthread+0x248/0x260 ret_from_fork+0x10/0x18 ------------[ cut here ]------------ irq 169 handler irq_default_primary_handler+0x0/0x18 enabled interrupts Cc: Sean Paul Cc: Jordan Crouse Cc: Jayant Shekhar Cc: Rajesh Yadav Cc: Jeykumar Sankaran Signed-off-by: Stephen Boyd Signed-off-by: Sean Paul Signed-off-by: Sasha Levin