summaryrefslogtreecommitdiffstats
path: root/src/usr/sbeio
Commit message (Collapse)AuthorAgeFilesLines
...
* Fixing SBE PSU error messagesElizabeth Liner2018-02-141-8/+59
| | | | | | | | | | | | | | | | When we added support for SBE rebooting, an error was incorrectly removed - the error when there is a correct PSU timeout that is not associated with the SBE. This commit adds that error back in. Change-Id: Ie289f5ff5312d0b1415a98531fd4a8b94cef37ae Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/52844 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Initialize SBE message communication on HBRT startMatt Derksen2018-02-071-79/+88
| | | | | | | | | | | | | | | | | | | Need to clear first 2 bits in CFAM register 0x283B. This basically resets our SBE communication stream just incase HBRT restarts after processing SBE interrupt. Clearing these bits tells the sender to resend the command. Change-Id: I1a1c5b80cc99414649d38c06b93428c87299f242 RTC:186334 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/53225 Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Brian E. Bakke <bbakke@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Always have secureModeDisable bit set to 0 in sbe_retry_handlerChristian Geddes2018-02-041-1/+1
| | | | | | | | | | | | | | | | | After talking with the HWP writers for the sbe_extract_rc HWP they told us we should always act like the secureModeDisable bit is false. The only reason that option is there is for lab use and we shouldnt ever use it. This commit makes that bit always 0 Change-Id: Id781df3a95ffdf5ec82624aebe6830f17d7dcf2b Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/52861 Reviewed-by: Elizabeth K. Liner <eliner@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* HB supports - Use ADU chipops to switch fabric configurationThi Tran2018-02-032-85/+224
| | | | | | | | | | | | | Change-Id: I090cdac654d9c6efbe30748713687c6e36ff914d RTC:177597 CQ:SW413432 Backport: release-fips910 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/52878 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Save away SBE FFDC and COMM area address in corresponding attrsChristian Geddes2018-02-011-2/+8
| | | | | | | | | | | | | | | | | | | | | We set the SBE's FFDC and COMM area addresses in at least 2 points of the IPL. The first time we do (PSU chip op) we were sending the addr down to the SBE but we were not storing it in the platform attributes SBE_FFDC_ADDR and SBE_COMM_ADDR. This commit adds some code that will save off these values. Functionally this was correct before, but it might have been confusing to debug a problem when the SBE's FFDC area wasn't matching what attribute told us Change-Id: I5cd9d63bf8be26093a24f28ff82a05ac8321a338 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/52594 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Fixing timeout error in PSU code - removing hangElizabeth Liner2018-01-301-2/+2
| | | | | | | | | | | | | | | | | There was an issue in the PSU SBE code where we were hanging, and subsequently failing. This changes the elapsed time counter to increment more quickly. Change-Id: I3c4c4905b8bad81c5dcca1e7d7bd5935a9e671a6 CQ:SW410105 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/52934 Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Add sbe_retry_handler to FIFO fail pathChristian Geddes2018-01-302-6/+62
| | | | | | | | | | | | | | | | | | | | In the event of a FIFO communication failure w/ SBE, hostboot wants to run the sbe_retry_handler in order to collect as much FFDC as possible. We were missing support for this before this commit. This commit also adds support for the sbe_retry_handler to use the Secure Debug Bit and the unsecure mode bit for the p9_extract_rc hwp. Change-Id: I171abd89ccf4e78ffcc7c1190b58af3b11846362 CQ:SW395356 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/52702 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Elizabeth K. Liner <eliner@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Extract error info from PIBMEM array save-offSoma BhanuTej2018-01-242-4/+22
| | | | | | | | | | | | | | | | | | Change-Id: Ib7f66c6214bf0825ba38ffa1c7ecd81f5ae20e53 CQ: SW414284 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/49219 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: Anusha Reddy Rangareddygari <anusrang@in.ibm.com> Reviewed-by: RAJA DAS <rajadas2@in.ibm.com> Reviewed-by: SRINIVAS V. POLISETTY <srinivan@in.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/49224 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
* Move closing all unsecure memory regions to 21.3Stephen Cprek2018-01-222-1/+17
| | | | | | | | | | | | | | | | | | | | Current windows that are left open at end of IPL - SBE FFDC - CPU Controls SP ATTN area - 0-64MB for SP ATTN Change-Id: I887fc63bcc70f2351530741bd251db12732a5948 RTC:168745 Backport:release-fips910 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/52045 Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Marshall J. Wilks <mjwilks@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Propagate PLID from caller to any new errors; GARD target on retry failsRoland Veloz2018-01-181-5/+125
| | | | | | | | | | | | | | | | | For any new errors, if caller has provided a PLID, that PLID is to replace the new error's PLID. Also gard out the target associated with the SBE if the SBE retry fails. Change-Id: Ic0bf1a0233c1cda8f91dd0ef093bd6c9e31574bd RTC:184891 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/51904 Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Make the MemRegionMgr class target awareStephen Cprek2018-01-172-48/+165
| | | | | | | | | | | | | | | | | Creates a map of target,region map lists to allow the opening of the same regions against different targets Change-Id: Ieb2235765da99b25c018a5e9546ac2f8ca252a39 CQ:SW412793 Backport:release-fips910 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/51923 Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Adding advanced restart logic after detecting vital attentionsElizabeth Liner2017-12-222-12/+30
| | | | | | | | | | | | | | | | This code sets up and calls the SbeRetryHandler class to attempt an SBE restart. Additionally, we need more than one way to restart the SBE: p9_start_cbs and hreset. This commit sets up the structure to use one of the two methods while waiting on hreset to be available. Change-Id: I17dfb4047268efa84e388391698b668cec2e13e4 RTC:180243 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/50953 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Add call to get the SBE RC and commit it to an error logElizabeth Liner2017-12-221-2/+39
| | | | | | | | | | Change-Id: I9cb9a03a8c8530cf1476a0ddd4923fff43ca88ae RTC:180241 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/50952 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Add in a check in the PSU error logging for SBE failureElizabeth Liner2017-12-203-286/+164
| | | | | | | | | | | | | If there is an error in the PSU, and there is no FFDC, there is probably something wrong with the SBE. Since there is new support to attempt an SBE reboot if there's an error, we want to add that functionality to the PSU flow as well. Change-Id: I8203193b49caaf640962e181a814df83c0760ff4 RTC:178801 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/46641 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Adding SbeRetryHandler to the runtime moduleElizabeth Liner2017-12-132-1/+30
| | | | | | | | | | | Change-Id: I08ef8fee920178bb4b806df8633626318c11ba0f RTC:180961 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/50380 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Unit tests for SbeRetryHandlerElizabeth Liner2017-12-132-0/+245
| | | | | | | | | | | Change-Id: I86c25275c1fd218c10da8c604a971a342155b232 RTC:180961 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/50179 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* SBE error logging and handler cleanupElizabeth Liner2017-12-134-723/+215
| | | | | | | | | | | | | | | | | | | | | | | This commit takes care of a few things 1) Removing the sbe threshold handler - we decided that retrying after the initial loop was overkill 2) Making use of the class structure - we added a lot of class elements to decrease things passed between functions and to facilitate debugging 3) Creating a main entry point and simplifying functions We decided that we wanted one function to handle all actions. This also made some function irrelevant and as such they were removed. Additionally, this also fixes an infinite circular logic bug. Change-Id: I9556e3181226755150c3debd1471f1be23e13be4 RTC:180961 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/49886 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Adding more debugging traces to the SBE error handlerElizabeth Liner2017-12-112-12/+64
| | | | | | | | | | | | | Change-Id: I9c71969486d8160caa6e675ea91ba9aed5e088a9 RTC:180961 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/49109 Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Fixing the SBE switch functionalityElizabeth Liner2017-12-081-79/+119
| | | | | | | | | | | Change-Id: I121c121b8c58f3c44e748d91a88906ad1ca35d43 RTC:180961 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/49067 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Create base class structure for SbeRetryHandlerElizabeth Liner2017-12-084-59/+103
| | | | | | | | | | | | | | This commit restructures the sbe_extract_rc_handler code into its own class. Change-Id: Ib6ecb1a67353b060a6578b13da951b276bc93ca7 RTC:180961 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/48511 Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Use readSeeprom PSU chipop to get SBE seeprom image versionChristian Geddes2017-11-172-0/+109
| | | | | | | | | | | | | | | | | | | | During an SBE update we were getting I2C collisions when trying to access pnor on the "running" or "active" side of the seeprom. This commit adds support for a PSU chipOp called "readSeeprom" which allows the host to make a request to the SBE to copy a specified chunk of pnor out to a buffer in memory which the host can access. This commit also uses this chipOp in place of the I2C read during the SBE update of the active seeprom side. Change-Id: I4b639ebe6090dcc0bdbb42f13fcb12c23260a8b4 RTC: 180959 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/48408 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Moving SBE threshold handler to its own fileElizabeth Liner2017-11-064-220/+379
| | | | | | | | | | | | | | | | The SBE extract code is being moved to a class structure, and since the FSM uses function pointers, we cannot easily implement a finite state machine. Change-Id: I380e53f0a78662c4f5dfd9e8db3cb6d4761a0be3 RTC:180961 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/48996 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Centaur ring support - ring_apply and ring dataSumit Kumar2017-11-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Introduces Centaur ring ID header files and ring_apply support to generate a separate Centaur ring image file. - Introduces common ring ID header file consumed by both P9 and Centaur and all user codes, e.g. putRing, ipl_build, xip_tool, etc. - Introduces a namespace approach for complete separation of P9 and Centaur ring data and to facilitate execution time selection of either P9 and Centaur ring data. - Added Centaur image .rings generation function to p9_ring_apply. - This commit does NOT support Centaur in the TOR API nor in xip_tool. See commit 38018 for that support. - Modified hw_image.mk file to support Centaur XIP image generation. - Updated ring_apply to also support .overrides ring gen for Centaur. Change-Id: I12a27b194dc14d906fea7bc273eb9f766f0fc5bf Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/35639 Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Sumit Kumar <sumit_kumar@in.ibm.com> Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com> Reviewed-by: Richard J. Knight <rjknight@us.ibm.com> Reviewed-by: Thi N. Tran <thi@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/36011 Reviewed-by: Hostboot Team <hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
* Additional checks to p9_extract_sbe_rcSoma BhanuTej2017-10-241-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | - To detect NDD1 or other chip for seeprom & otp addr upd - pibmem program exception - otprom program exception - Use sbe_cs bit to identify the state of pk loader - Adding CBS_STATUS_REGISTERS,ROOT_CTRL_REGISTERS in xml - Using ifndef __HOSTBOOT_MODULE while read MBOX registers - Update all Non-Secure mode RC names Change-Id: Ic764bbda94d9beb023aa1861cb143bf05b8ff06a RTC: 174954 CQ: SW404908 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/41738 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com> Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: Soma Bhanutej <soma.bhanu@in.ibm.com> Reviewed-by: Joachim Fenkes <fenkes@de.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/41770 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Secure Boot: Log SBE FIFO scom blacklist violationsNick Bofferding2017-10-191-0/+43
| | | | | | | | | | | | | | - Log SBE FIFO scom blacklist violations, but do not terminate system Change-Id: Ie857bb829471b67b5c08cf8a4a06da9ead050afb Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/48358 Reviewed-by: Stephen M. Cprek <smcprek@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Implement FAPI_PLAT_CALL_SUBROUTINE macroChristian Geddes2017-10-172-13/+9
| | | | | | | | | | | | | | | | | | | HWP writers need a way to request certain HWPs to run on the SBE for non-master processor targets while we are in secureBoot mode. This macro will check these conditions and if we are on a non-master in secureMode then we will issue a fifo chipop to the slave sbe in order to request the SBE to perform the HWP. This commit also adds some simple test cases to verify the failure paths. Also fapi2 test cases are re-enabled in this commit. Change-Id: Ic42fe2df5692fb5994985d92b2fd767ea7c1234a RTC: 179062 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/46580 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add Hostboot infrastructure for secureHwp chipop requestChristian Geddes2017-10-153-0/+218
| | | | | | | | | | | | | | | | Create structs and methods required for issuing a secureHwp chipop request to the SBE. Change-Id: Id493fc59346ee2c7155bd09a88ac0cba22a29c42 RTC: 179062 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/46365 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Brian E. Bakke <bbakke@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Moving SBE error and threshold handler to sbeioElizabeth Liner2017-10-102-1/+1104
| | | | | | | | | | | | Change-Id: I15438b21692f45899efb75afcc1db31f9caece15 RTC:178801 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/46843 Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Prachi Gupta <pragupta@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Update set_sbe_error macro exceeds line lengthRichard J. Knight2017-10-031-0/+1
| | | | | | | | | | | | | | | | | | | | | -Undate macro to call a function for each RC value instead of inlining of all FFDC collection -Update parseErrorInfo.pl script to generate a new file which contains functions for use in new macro layout Change-Id: I40a02fef07b3618b137a8e0c2bfa10c9756da600 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/46719 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com> Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: ARAVIND T. NAIR <aravindnair@in.ibm.com> Reviewed-by: Sachin Gupta <sgupta2m@in.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/46722 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Empty interface for SBE vital attention handlingDan Crowell2017-09-283-0/+62
| | | | | | | | | | | | | | | | | | Creating a NOOP function for PRD to code against for SBE error handling. Change-Id: Ic16bb8ed2dca7f8a77a74d4fb7a60b2859621d39 RTC: 180239 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/46711 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Reviewed-by: Elizabeth K. Liner <eliner@us.ibm.com> Tested-by: Daniel M. Crowell <dcrowell@us.ibm.com> Reviewed-by: Brian J. Stegmiller <bjs@us.ibm.com> Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Set variables to nullptr after they are deletedChristian Geddes2017-09-251-0/+3
| | | | | | | | | | | | | | | | | | While updating some LPC logic a developer noticed a bug where an errlog handle wasnt getting set to nullptr after it was deleted this caused a confusing bug that took awhile to track. I noticed that this bug was all over our code so this commit fixes a lot of cases where variables get deleted but not set to nullptr Change-Id: I103b5c71b93686c3c89b04d1d565a24d4de74e6f Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/45890 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Move targ info getter func for sbechipOp into common codeChristian Geddes2017-09-212-0/+125
| | | | | | | | | | | | | | | | Before we only needed to get the target info for the scan chipop, now more sbe chip ops require this functionality so we are moving it to common code Change-Id: Ifbb680db27c5975ee216d5d21ff78192c9ea2d34 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/46345 Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* cumulus: changes to boot simics all the way to test casesPrachi Gupta2017-08-292-3/+5
| | | | | | | | Change-Id: Ibc62f59635db28e50197139276b9b4c6b59ccc3e Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/44768 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Implement getSbeFfdc FIFO requestMarty Gloff2017-08-278-17/+542
| | | | | | | | | | | | | | | | Add support for sending getSbeFfdc FIFO requests to SBE and add a test case for the getSbeFfdc request. Change-Id: I19dbbd92cb2d25679218528d199cfbd09fd9f995 RTC: 178022 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/44288 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Implemented SBE Passthrough for Attribute Override.Donald Washburn2017-08-247-5/+1778
| | | | | | | | | | | | | | | | | | | | | | | | | *Wrote a runtime SBE pass-through function to invoke the runtime apply_attribute_overrides function. The caller is required to place the request data in the SBE COMMS reserved memory area and invoke the sbe_message_passing function. The request data consists of an sbeMessage_t header followed by binary override data which can be obtained from the attributeOverride tool. Upon completion of the sbe_message_passing function, the respose data will be written to the SBE COMMS AREA. *Added support for accessing system attributes at runtime. RTC: 152409 Change-Id: Ieed3e026350cc272e6268e7802971551d3f39ed4 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/44311 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Use keyAddr stash chipop to pass rsv mem addr through SBE for MPIPLcrgeddes2017-08-232-2/+26
| | | | | | | | | | | | | | | | | | Previously we were relying on the reservedMem section to be a certain address for the attrrp to find after an MPIPL. With this change the address is passed through the SBE so the reservedMem data can be anywhere RTC: 165369 Change-Id: I06521c049088c4a53a8c0a51fa07e5200da09483 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/44624 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Brian E. Bakke <bbakke@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Enable SBEIO PSU calls to Open/Close Unsecure Memory RegionsMike Baiocchi2017-08-044-71/+313
| | | | | | | | | | | | | | | | | | | | This commit enables the SBEIO PSU calls to the SBE to open and close Unsecure Memory Regions now that the SBE team supports that API. Their support, however, does not actually whitelist/blacklist the memory at this time. This commit also gracefully handles the errors from the SBE saying this support is not there. Change-Id: Ia9367b17e403bf759d778de5f4bc7fca3544397b RTC:174970 CMVC-Prereq: 1030098 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/44018 Reviewed-by: Marshall J. Wilks <mjwilks@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Stephen M. Cprek <smcprek@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Added parser for scom FFDC data and a SBE messaging buffer class.Donald Washburn2017-08-0412-112/+3684
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The FFDC data from an SBE Scom read/write needed to be parsed and used to invoke PIB::addFruCallouts during both FIFO and PSU operations. During task research it was discovered that the error code path for reading FIFO request responses had several errors. These errors related to manipulating a duel buffer system. Fixed these errors and encapsulated the duel buffer handling in order to facilitate unit testing. * Created FFDC parsing classes FfdcParsedPackage and FfdcScomPibErrorPackage in order to validate and process FFDC data based upon the return code contained within the FFDC. * Created the SbeFifoRespBuffer class for encapsulating the handling for the duel buffers used in the fifo readResponse method. * Modified the SbeFifo::readResponse method to use the SbeFifoRespBuffer class for messaging and the new FFDC parsing classes for handling PIB addFruCallouts. * Modified the SbePsu::readResponse method to use the FFDC parser classes to invoke PIB::addFruCallouts. * Added Unit Tests for SbeFifoRespBuffer, FfdcParsedPackage and FfdcScomPibErrorPackage. Change-Id: I195fa036dfa6a0d66d9a3dc15aeb8b0f01cf798c RTC: 175891 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/43212 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Dzuy Nguyen <dzuy@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Fix race condition between INTR and SBEIODan Crowell2017-07-312-30/+101
| | | | | | | | | | | | | | | | | | | | | Fixed a race condition in clearing out the PSU interrupt register that existed between the INTR and SBEIO code. We can sometimes lose interrupts for SBE PSU operations which leads to a timeout. Also added code to look for SBE errors if a PSU operation times out Change-Id: I8cdcdcc08956b038bcc65ad7e00a34719bf14c61 CQ: SW396057 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/43339 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Elizabeth K. Liner <eliner@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Secureboot: Add IPL calls to Open/Close Memory Regions via SBEMike Baiocchi2017-07-192-48/+86
| | | | | | | | | | | | | | | | | | | This commit adds the open/close SBE memory region calls throughout the IPL, as needed. The underlying SBE calls are still commented out, however, as we await SBE support. Change-Id: I87685dca95e5cb7d10997eb6eb414a1927862d64 RTC:145686 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/42873 Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Stephen M. Cprek <smcprek@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Marshall J. Wilks <mjwilks@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Secureboot: Base Support of Opening/Closing Memory Regions via SBEMike Baiocchi2017-07-194-0/+943
| | | | | | | | | | | | | | | | | | | | | This commit provides the base support of Opening and Closing Unsecure Memory Regions via PSU commands to the SBE. It introduces external interfaces, a Memory Region Manager class, and a testcase that covers the expected use of the interfaces. However, it does not enable the actual PSU commands to the SBE since their support is not yet available. Change-Id: I086011fcbd485abf2db574a82d43cfdea120ffc8 RTC:145686 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/42834 Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Stephen M. Cprek <smcprek@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Marshall J. Wilks <mjwilks@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add in PSU infrastructure for stashKeyAddr sbe chip opcrgeddes2017-07-173-1/+87
| | | | | | | | | | | | | | | | | | For mpipl we need to pass an address through the SBE. To do this the SBE is writing functionality that takes in uint8_t key and a uint64_t value and from this chipOp and stores it in the bootloader image (before 12k exception vector but after magic keyword). I also cleaned up some prior naming inconsitencies in this commit RTC: 173362 Change-Id: Id6dc47ed0e34f50f74fc894007dd144b2f7bfe81 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/41844 Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Correctly handle sbe ranges for multiple chipsDan Crowell2017-07-131-1/+9
| | | | | | | | | | | | | | | | | Fixing a bug where we did not use unique instance ids for each SBE's comm and ffdc area. Also reconciled a couple related mismatches and added some traces for easier debug. CQ: SW395465 Change-Id: Ib2a50644c114e5b08222b9fb19e92923466fa24c Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/42994 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add some more FFDC for SBEDan Crowell2017-07-121-5/+9
| | | | | | | | | | | | | Add the response and the target processor to the SRC for PSU timeouts. Change-Id: I4c739a66ab5bee8e35a514f6851e4c55e09d18e8 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/42369 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* handle pibrc correctly from sbe fifoPrachi Gupta2017-06-302-1/+63
| | | | | | | | | | | | | Change-Id: I3f0ba875a47fdd00758c65b7982f300f0e05cd14 RTC: 170433 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/41847 Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Sachin Gupta <sgupta2m@in.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Matthew A. Ploetz <maploetz@us.ibm.com>
* Finalize SBE PSU FFDC collection - Handle setFFDCAddress failedDzuy Nguyen2017-06-231-12/+27
| | | | | | | | | | | Change-Id: I9d9ac10df9eb44f63203abca14db3bcf8a7c9d16 RTC: 164405 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/41608 Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Shakeeb A. Pasha B K <shakeebbk@in.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Finalize SBE PSU FFDC collection - Set FFDC address in PSUDzuy Nguyen2017-06-061-82/+123
| | | | | | | | | | | | Change-Id: Ia2b1012cf2938f34cc6acdbb888b5a489aac98f6 RTC: 164405 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/40453 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Reviewed-by: Shakeeb A. Pasha B K <shakeebbk@in.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Full Path of SBE message passing Add HTMGT default path testingMarty Gloff2017-05-181-3/+94
| | | | | | | | | | | | | | | Add a test that calls the default HTMGT processing path when HTMGT is configured. Change-Id: I6cde3e9fbf35370118e715c19fb4f63c2ee21edd RTC:173806 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/40099 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Fix rt_sbeio.C include and add TS_FAIL infoMarty Gloff2017-05-102-2/+1
| | | | | | | | | | | | | | Commit 39894 causes compile fails because of a deleted header file. Fix includes in rt_sbeio.C and also make a recommended test case change from review of the same commit. Change-Id: Iac3d90ee80f483c695da42122013aef3c1c72017 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/40351 Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
* Include HUID of failed Proc in TI data for certain SBE errorsBill Hoffa2017-05-102-2/+4
| | | | | | | | | | | | | | | - Include a generic error pipleline for other future error scenarios to leverage this functionality Change-Id: Icc1399ee93157c7106d394944a3355285a8cd830 RTC: 171865 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/39072 Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Prachi Gupta <pragupta@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
OpenPOWER on IntegriCloud