summaryrefslogtreecommitdiffstats
path: root/src/include/usr
Commit message (Collapse)AuthorAgeFilesLines
...
* Trusted Boot: When TPM not detected properly, report errors if TPM is requiredNick Bofferding2018-10-012-9/+34
| | | | | | | | | | | | | | | | | When the MRW for a machine defines a possible enabled TPM, and the "TPM Required" policy is "Required", then it is expected the TPM will be detected as present. If that is not the case, surface the detection failure as a visible error log, and generate another visible log indicating that a TPM expected to be present was not detected correctly. Change-Id: Icbfca04beaa6fdece147cc24f4e0615b5856a830 CQ: SW444532 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66422 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Correctly handle psu FFDC on OpenPower SystemsChristian Geddes2018-09-271-24/+0
| | | | | | | | | | | | | | | | | | | | | | | Prior to this change, there was a switch statement that was saying "if this RC is found in the psu FFDC, then do this recovery action" that is obviously not very easy to maintain because for every error we need to add the proper action. Instead of this, now we will just look if any GARD records were created as part of the error found in the FFDC. If a gard was found , Hostboot will stop trying to recover the SBE and instead enter a reconfig loop to try and IPL w/ the target garded out. Again this only applies to OP system, in the FSP world we will commit the error logs w/ the gard records and then TI telling HWSV they need to look at the SBE Change-Id: I04e03feebf2bbd1eae2d725bee31993062fe7c94 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66374 Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Attribute cleanupDan Crowell2018-09-271-9/+0
| | | | | | | | | | | | | | | | | | | | | | | Added mrwHide to a lot of platInit attributes, this will prevent them from showing up in the ServerWiz tool where the value will be hard to change. Instead these will always rely on the default in the xml or explicit platform code to set. Also removed a bunch of unused tags to clean things up. Change-Id: Id237924d737392368c418cc31d6506f1f5598b98 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/64233 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: STEPHEN GLANCY <sglancy@us.ibm.com> Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com> Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: Joseph J. McGill <jmcgill@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66015 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* PRD: Updates for PM ffdc parserBenjamin Weisenbeck2018-09-261-4/+5
| | | | | | | | | | | | | | | CQ: SW444956 Backport: release-fips922 Change-Id: Ie79eb21ae8173fb4ed699683e5187c51bdd4cb39 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66138 Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com> Reviewed-by: Caleb N. Palmer <cnpalmer@us.ibm.com> Reviewed-by: Brian J. Stegmiller <bjs@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66642 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
* Support HB running in SMFDean Sanner2018-09-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | Support SMF for P9N/P9C. Lots of minor tweaks to make this work, but the biggest is to run userspace in problem state This is needed because for SMF Hostboot will need to run in S=1, HV=0,PR=1 (and kernel in S=1, HV=1, PR=0) This commit makes P9 HB userpsace run in HV=0 PR=1 and kernel in HV=1, PR=0. Change-Id: Ia4771df5e8858c6b7ae54b0746e62b283afb4bc4 RTC: 197243 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/50530 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Dean Sanner <dsanner@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Support fapi2 i2c functionsMatt Derksen2018-09-204-21/+185
| | | | | | | | | | | | | | | | | New interface in fapi2 to perform i2c operations directly. This is needed for OCMB access before we get OMI bus running, specifically as part of a cmd/rsp protocol. Change-Id: I8b778f12f8c0c6820ceb51146f1e21d30891c964 RTC:197029 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/63919 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Forcibly clear all previous wakeups when the PM Complex startsDan Crowell2018-09-192-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | The power management logic was designed with the assumption that the external callers would manage the state machine such that the order of operations is always: load->start->reset->load->start->reset->etc. However, we have discovered edge cases where a reset can happen before the first load or after a previous reset. In either case we will end up with our wakeup counter being off by one and thus never releasing wakeup. The solution is to add logic to the start path that will explicitly clear the counter out completely, regardless of its current value. This will ensure that wakeup is released once the complex is alive. Change-Id: Ifb436335090ff910b9ee0f083d9a550b81833287 CQ: SW442639 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65518 Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Add OCMB_CHIP and MEM_PORT fapi2 test casesChristian Geddes2018-09-181-47/+14
| | | | | | | | | | | | | | | | | | | | This commit adds test cases for new OCMB_CHIP and MEM_PORT target types that are being added to support the new explorer memory buffer used in Axone. Also this commit fixed up the Axone target generation which was missing a break on the inner loop and removed some changes that were made in target.H which was allowing invalid parets to be looked up for dimm targets. RTC: 172970 Change-Id: I7564fbcfcdde2177ece934015fe40c79011f559f Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65511 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Update fapi2 tests cases with Axone targetsChristian Geddes2018-09-181-20/+0
| | | | | | | | | | | | | | | | | This commit will add new fapi2 tests case to make sure that the new MCC, OMI, and OMIC target types work correctly. Also in this commit I realized how much of a pain adding new targets can be for these tests so I added some macros to reduce the amount of changes required for some of the tests when new targets get added Change-Id: I5879c23dcd756686e369b1f81e58d56b73b1607f Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65204 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Clear out HOMER attributes and reset PM in PHYP modeDan Crowell2018-09-181-2/+15
| | | | | | | | | | | | | | | | | | | | During the IPL, Hostboot will initialize part of the PM Complex and setup the HOMER memory spaces. At runtime, PHYP will reinit the complex with its own memory spaces. This change explicitly resets the complex and clears any related HOMER attributes before jumping to PHYP so that the first call at runtime starts completely fresh. Change-Id: I540b79143d5fbba876ffc0ac72721639153a1cfa CQ: SW444669 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65983 Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Targeting support for NVDIMM-N P9 on ZZTsung Yeung2018-09-184-2/+161
| | | | | | | | | | | | | | | | | (Redo from previous change https://ralgit01.raleigh.ibm.com/gerrit1/#/c/56096/) -Added interfaces for accessing NVDIMM via I2C -Added attributes to support NV controller on NVDIMM -Moved all attributes to common file Change-Id: Ief68d9d5e0aaadfa017b4fe117bdb3e29739e772 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/59995 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Dean Sanner <dsanner@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Additional tracing for shutdown eventsMatt Derksen2018-09-121-1/+4
| | | | | | | | | | | | | | | | | Hit an issue where a shutdown was called but all that is traced is a msgQ pointer. These traces should help associate the msgQ pointer to an actual task being shutdown. Change-Id: Ic22fdde1a146eec90f26d557e8af1ddec3c85c4e CQ:SW443508 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65464 Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add VERSION to all OpenPOWER error logsMatt Raybuck2018-09-071-0/+8
| | | | | | | | | | | | | | | | | | | When an error log is created for OpenPOWER systems it didn't contain the VERSION info within it. This commit adds a function called AddVersionInfo() that appends the VERSION info to every error log for OpenPOWER. Change-Id: Ic259e10e942f6df0675055823e4945ef9696b659 RTC: 196794 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65506 Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Port System and Node Targets Stitching CodeIlya Smirnov2018-09-055-2/+288
| | | | | | | | | | | | | | | | | | | | HBRT's targeting doesn't map the System target to its nodes correctly because the target stitching code, that already exists on FSP, is not present in HBRT. This change ports the abovementioned code to HBRT, so that the system and node targets are correctly associated to each other at the end of targeting init. Note that unstitching is required during MPIPL to break the links between sys <-> node because only one node on which hb is running is visible during the boot. Change-Id: I9731144c480b3357ff7b4aff02d13623a1119dac CQ: SW432119 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65494 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Check capability bit before using wakeup for OPAL in OpenPOWERDan Crowell2018-09-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | A recent change switched out special wakeup handling over to use the host interface instead of the internal HWP calls. However, we just discovered that the opal-prd application was not allowing those calls on non-FSP systems. The opal-prd code is being updated, but since that is delivered as part of the Linux distro (not firmware) we need to handle the situation where newer Hostboot is running on top of the older opal-prd. This commit adds a check for a new OPAL-specific capability bit that will ensure we only use the wakeup interface if the opal-prd hosting us supports it. Change-Id: Ib9b99a4549a023d466572c19c2f7208e1c26d8f8 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65208 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Update PG detection for new Axone memory targetsChristian Geddes2018-09-051-2/+7
| | | | | | | | | | | | | | | Add support for presence detection of new OMI, OMIC, and MCC targets. Detection is done by looking at the MC01, and MC23 PG data. Change-Id: I2706bb28f64df653546ce22451e690507be09d8e RTC: 197541 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/64966 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Update VPD in correct node at runtimeNick Bofferding2018-09-051-1/+1
| | | | | | | | | | | | | | | Fixes VPD writes in runtime code to include the node HUID of the target whose VPD is to be written in the communication to FSP so that FSP can apply the update to the VPD within the correct node Change-Id: Ic0801450e312714e80f067b4817b4d06d8236f0c CQ: SW444403 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65615 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
* Deconfig EC/EX/EQ at runtimeRoland Veloz2018-08-302-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Applied the normal parent/child rules for EC/EX/EQ logic to be done in the runtime deconfig logic. After applying the deconfig logic, then reset the PM for the parent proc of the EX/EX/EQ. To facilitate the code changes, modified the return value of the TARGETING::getParent(...) call. It no longer returns a const * Target, considering 5 times out of 7 of it's usage, users were just staic_cast(ing) away the const. Clear out the HB reset attribute in the mpipl path. Modify PRD logic to use runtime deconfig call in malfunction alert path. CMVC-Prereq: 1066157 Change-Id: If81f2f15c6e84bf2adb6fd66c1321b8f1ddf1a86 CQ: SW443157 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/64873 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Fix some shortname issuesDan Crowell2018-08-291-1/+1
| | | | | | | | | | | | | | | | MEMPORT is using mp Made all processor-level names generic Change-Id: I50ac5742b20645574ce5bd4636fa23ec39357b96 RTC: 172969 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/64065 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add brief descriptions for procedure calloutsDan Crowell2018-08-291-0/+57
| | | | | | | | | | | | | | | | | | Added brief dox descriptions for the EPUB_PRC callouts that are used to point to an isolation procedure of some kind. Resolves #15 CMVC-Prereq: 1065619 Change-Id: I67b5e7d82785f296d2632b2459f763bec7767a98 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/64822 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com> Reviewed-by: Benjamin J. Weisenbeck <bweisenb@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Combine trace buffers in errlogMatt Raybuck2018-08-282-11/+37
| | | | | | | | | | | | | | | | | | | Whenever ErrlEntry::collectTrace() was called it would create a new trace UD section each time. This led to duplicate entries in the errl. A new function was added to ErrlEntry to prune duplicates called removeDuplicateTraces(). Change-Id: I3685ecf1368dad421bca2d1b6b612e08755e25ce RTC: 118128 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/64971 Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Trusted Boot: Report Primary TPM required reason code as terminatingNick Bofferding2018-08-241-0/+1
| | | | | | | | | | | | | | | | | | | | This commit flags the RC_TPM_NOFUNCTIONALTPM_FAIL reason code as a terminating reason code to tell FSP that there is an expected boot failure without a deconfiguration. Further, when this error occurs, it TIs with this error's reason code instead of its PLID, so that FSP will balk to the alignment check to failover and use the backup TPM, when possible. Change-Id: I6809dd1de6f37ce50d6528ce1014c5ede115b0dd CQ: SW442904 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/64973 Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Marshall J. Wilks <mjwilks@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Secure Boot: Report base/extended code mismatch as terminatingNick Bofferding2018-08-241-0/+1
| | | | | | | | | | | | | | | | | | | This commit flags the RC_BASE_EXT_MISMATCH reason code as a terminating reason code to tell FSP that there is an expected boot failure without a deconfiguration (and to handle like a secure boot verification failure) Change-Id: I658b0646cfccd6621ab15f889feccd2378a27d44 CQ: SW443077 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/64978 Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com> Reviewed-by: Matthew Raybuck <mraybuc@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Marshall J. Wilks <mjwilks@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Account for mixed procs in compatibility modeDean Sanner2018-08-211-0/+17
| | | | | | | | | | | | | | | | Current code enforces the same EC level for all processors in the system. However, this breaks compatibility mode for P9C 1.2/1.3 and P9N 2.2/2.3. Added code to allow these to pass the EC check when mixing parts Change-Id: Ie013d94dfdee3627911f4afbec5f65d5ce984227 CQ:SW442691 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/64823 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add flag to HWAS Callout for SMP repair indicatorDan Crowell2018-08-193-8/+37
| | | | | | | | | | | | | Used one of the reserved bytes of the callout structure to hold a flag that will indicate if the SMP bus being called out is completely down, and thus eligible for concurrent repair. Change-Id: I299e3393529e811aa006a087de51165b79038201 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/63946 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Implement generic i2c device callouts for FSPJaymes Wilks2018-08-133-8/+78
| | | | | | | | | | | | | | | | | | | Creates a new type of callout for i2c devices which populates the error log user details section with the address, port, engine, and i2c master of the device being called out. The change only affects the FSP path. Change-Id: I92acc092f105ee21346594f5e3733957e15ad768 RTC:94872 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/63223 Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: MURULIDHAR NATARAJU <murulidhar@in.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Base targeting support for OCMB chip and MEM_PORT chipletChristian Geddes2018-08-081-34/+113
| | | | | | | | | | | | | | | | | | | | | | | | In Axone we are introducing a new memory buffer known as the Open Capi Memory Buffer chip. On this chip will be a MEM_PORT chiplet(s) which will connect to the DIMM. This completes the following picture (it is expected OMIC, MCC, and OMI have been added already) MI--MCC / \ Proc--MC < __ OMI--OCMB--MEM_PORT--DIMM \ / OMIC Change-Id: I1a3e3d38978ce11fecee2ab11de83909eb440774 RTC:172970 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/63911 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Reviewed-by: Prachi Gupta <pragupta@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Base targeting support for Axone memory complexChristian Geddes2018-08-082-4/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Added 3 new target types to start things off. These are the OMI (open-capi memory interface), the OMIC (open-capi memory interface controller), and the MCC (memory channel controller). These new targets will help us represent the new memory complex we are using for axone. The axone memory hiearchy will look like this: MI--MCC / \ Proc--MC < __ OMI--OCMB--MEMPORT--DIMM \ / OMIC **Note that OCMB/MEMPORT have not been implemented in hostboot yet Change-Id: I3df4eb3e279f825f0bdee86448ea23cb975e5511 RTC:172969 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/63744 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Reviewed-by: Prachi Gupta <pragupta@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* p9_fab_iovalid: process errors returned by this HWPPrachi Gupta2018-08-021-0/+2
| | | | | | | | | | | | | | | | | | | When partial links fail to train, this procedure will return a vector of RCs. This commit adds in code to process those errors and add appropriate BUS callouts CQ:SW439810 Change-Id: Ie3465bbac2736dbcc20c9cf9a71e7c91ee618335 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/63506 Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Only unmask source on proc targ passed to unmask function in intrrpChristian Geddes2018-08-012-34/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | There was a bug in the code where if an interrupt was resolved for a source the code to clean up the pending interrupt in the intrrp will unmask the source. This was actually unmasking the source on all processors. This causes odd behavior if there was an outstanding int on that source on one of the other processors. Essentially the intrrp would think that a new interrupt came in but we will already be handling it. The logic breaks down here and we end up getting in a locked state. Fixing this caused issues with Hostboot management of the maskList which kept track of which sources were masked. Instead of managing this list of masked sources hostboot will instead keep track of sources which are not registered to any msg Qs. When new processors are added to the interrupt resource provider after fabric is up, all LSI sources who are not registered to a msg Q will be masked for the new processor. CQ: SW419101 Change-Id: I86f5bc2a748383e18b1853d9bf9480f265c214fd Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/63158 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Dean Sanner <dsanner@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Minor Error Log ImprovementsMike Baiocchi2018-07-301-0/+3
| | | | | | | | | | | | | | | | | This commit adds the error log severity to the trace saying that a new error log is being created. It also cleans up an unused variable in some error log parsing logic. Change-Id: Iff196993bdabf80ad65006fca195f0785221257f Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/63476 Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Marshall J. Wilks <mjwilks@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Fix for SW438315 : IPL is stuck in loop eq(n0p0c0)Richard J. Knight2018-07-241-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | -If an attention is detected by PRD during istep 7 for a core/ex/eq the reconfigure loop will restart at istep 7.1 The target will be marked as non functional but since the masking of the FIRs is controlled by the SBE for cores/ex/eq's other attentions could still fire in a later istep. In order to have the fir mask updated for the deconfigured core/ex/eq a full reipl needs to take place so the SBE will see that the target is non-functional and mask attentions for it. -The change in this commit will be to not check for IPL attentions between any of the substeps of istep 7, the effect of this change will force a reipl due to the deconfigured part since the attention will now be detected outside of the istep 7 reboot loop. CQ:SW438315 Change-Id: I44e150ff0328ac4b9eaa5bbb2d6fcb36f6482d94 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/62852 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* [ARCH_REG 2] Enable architected register data reserve in the hostRaja Das2018-07-202-3/+16
| | | | | | | | | | | | | | | | Keep a reserve space for each proc where sbe can dump all the architected register state data, which host will use to build the hdat in mpipl path. Host will pass on this address to each SBE in the stash after calculating the respective offset basis the proc. Change-Id: Ia78c2ecaaa8967c1aac13913272ce6f2ea427b5d Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/59534 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Use Attr to Save/Fetch MDRT CountRaja Das2018-07-201-0/+1
| | | | | | | | | | | | | | | | | | | | MDRT count is saved out into an attribute in istep14 and the same is fetched out in istep21 for Phyp as well as Opal(ZZ-L) system. Added libruntime.so to istep14, Since Dump relies upon runtime module Moved 'useRelocatedPayloadAddr' setting to call_host_mpipl_service(), So that we have everything set before calling doDumpCollect() Change-Id: I5d30135d86a1477a68509aaff0516efb4d620410 Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/58636 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Only switch sides and perform hreset if SEEPROM side versions matchChristian Geddes2018-07-193-4/+26
| | | | | | | | | | | | | | | | | | | | | | | | In the event that the SBE fails hostboot will attempt to recover it. During runtime hostboot will attempt an HRESET if the SBE is in a failed state. When the SBE performs the HRESET it will save some important information that will persist through the reset. If one side is failing to recover the retry code will attempt to switch sides and do the hreset. If the SBE seeproms have different versions of the SBE code the data that was supposed to persist through the HRESET will be in incorrect places because the version mismatch. Because of this we cannot switch seeprom sides and perform a hreset if the seeproms have different level of the SBE code. CQ: SW438029 Change-Id: Ic7078a886088cc4d5355cc076e72d0fc36f85027 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/61605 Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Remove invalid HRMOR setting codeChristian Geddes2018-07-181-2/+7
| | | | | | | | | | | | | | | | | At one point in time there was a plan to have the SBE read the HRMOR and set it in the keyAddr stash space that is used to talk to HB. That plan was cancelled but the code was added to Hostboot. This commit removes the old invalid code. Change-Id: I026f07065ae3fc74849ffc4c08fcebbf01aec86f Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/62564 Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Send errors from previous boots as callhome type eSELsNick Bofferding2018-07-171-6/+18
| | | | | | | | | | | | | | | | | | During early boot, Hostboot attempts to resend unacknowledged error logs from prior boots as eSELS, without correponding SELs. BMCs typically require both in order to expose a given error log to a customer. This change morphs errors from prior boots into callhome type logs, so that a simple eSEL will be enough to get the error propagated. Change-Id: If499defe8a39b9254f08392b264d72047b7e5f7c CQ: SW426731 RTC: 193265 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/62079 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Add WOF compare data section for RC_WOF_TABLE_NOT_FOUND errorsMatt Derksen2018-07-161-0/+1
| | | | | | | | | | | | | | | | | Only show data that was compared to find a matching WOF table. Show each non-matching table in the WOF compare section along with what we were trying to match Change-Id: Ia3b44fac54a212e3584536c376598de5dfcf9a8d CQ:SW426770 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/61986 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Prachi Gupta <pragupta@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Read HW Key Hash From SBE Seeprom via ChipOp when applicableMike Baiocchi2018-07-064-3/+18
| | | | | | | | | | | | | | | | This commit uses SBEIO ChipOps to read the HW Key Hash from the SBE Seeprom when reading from the Seeprom that booted the processor. This will help avoid I2C collisions when both Hostboot and the SBE try to access the same SBE Seeprom at the same time. Change-Id: I5693cc59aa2a7259f07363328bd8513c943f0a06 CQ:SW435288 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/61958 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* SBE PSU timeout during MBOX init causes task crash/HB TIRick Ward2018-07-051-0/+32
| | | | | | | | | | | | | | | | | | | - Handling a PSU DD Timeout involves invoking the SBE Retry handler, which can cause crashes (FAPI library not yet initialized) if the timeout happens very early in the IPL. - Added a check if the FAPI Library was loaded, and added a call to handle the early timeout later in the IPL. Change-Id: I199cf0302af916b3f6ffec598ccab04c031e48e6 RTC:433868 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/61730 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Disable-CI: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Prachi Gupta <pragupta@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Print out MBOX/INTR state info on DMA request hangChristian Geddes2018-07-052-0/+29
| | | | | | | | | | | | | | | | | | | | We have been stuck on a hang that occurs during memdiags on our multi-node p9 systems. It appears that Hostboot is never receiving the response to the request to reclaim DMA buffers from the FSP. From debugging we know the FSP thinks it has sent the message over the FSI mbox but hostboot isnt seeing it. Next time this happens if this is in the code we should be able to get a better idea of what is happening. Change-Id: I6b702e4094da3576ba454b5cdf0660841961baff Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/60977 Reviewed-by: Richard Ward <rward15@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Add error callouts and other improvements for Node CommunicationsMike Baiocchi2018-07-033-2/+19
| | | | | | | | | | | | | | | This code adds bus, hw, code, etc callouts to the appropriate errors. It also cleans up other TODOs, refactors some functions, and applies somes fixes found in testing. Change-Id: I462cdb2c4e313c277a3e0542f740e82ede3313f3 RTC:184518 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/61813 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Allow SPDX override as part of FW loadDan Crowell2018-07-037-251/+57
| | | | | | | | | | | | | | | | | | | | | | | | Memory VPD contents have changed since the cards have been built so we need to provide a method to override the data as part of a FW build. We have done the same thing previously for the MEMD record on the Nimbus machines so will use the same design here for SPDX. As part of this change, the previous MEMD support was refactored to be completely generic so a single code path can be used for any arbitrary record. Change-Id: I5af5e965429c881be3de0d18c82b1d7918ac9c22 CQ: SW430659 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/61190 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com> Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/60980
* Make OBUS_BRICK deconfigurablearavnair-in2018-07-021-0/+2
| | | | | | | | | | | | | | | | | | | An OBUS has 2 smpgroup targets and 3 brick targets under it. To make sure that the parent OBUS does get deconfigured when the child SMPGROUP targets are gone (and if the OBUS is used ONLY for SMP) we need to get the brick targets under the OBUS deconfigured. Add new DECONFIGURED_BY_OBUS_MODE for this case Change-Id: I358a16c2b480c15f48c3dd591ba593225701a97f Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/61746 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Sachin Gupta <sgupta2m@in.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Prachi Gupta <pragupta@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Add Support for TPM Message Queue FlushingIlya Smirnov2018-07-012-0/+9
| | | | | | | | | | | | | | | Add a synchronous message handler to TPM daemon. This message handler is used to make sure that all of the traces are flushed before the daemon is shut down. Change-Id: Ibb8ea2fd12d7ded9e43f284ff44c1791e61d8767 CQ:SW435287 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/55223 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Secure Boot: Copy PHyp secure header into standard reserved memory areaNick Bofferding2018-06-292-19/+53
| | | | | | | | | | | | | | | | This change alters where Hostboot copies the Phyp secure header; instead of placing it in front of PHYP (PHyp HRMOR-4k), it instead redirects it to the standard reserved memory area. By doing this, we prevent it from unintentionally ending up in mirrored memory. Change-Id: I0b228b4a748310eba2b580efe2f191adca0d05e3 CQ: SW435712 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/61525 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* In non-MNFG, only match SBE keys for the sides that bootJaymes Wilks2018-06-282-2/+9
| | | | | | | | | | | | | | | | | | | FSP was not IPL'ing from SBE side 1 when production key is corrupt in SEEPROM of SBE side 0 (due to the key mismatch check). This change gets around that by only matching SBE keys for the sides that booted in non-MNFG case. Change-Id: I1dfcb5c7f7e281125fdbcfc8b8f3a84747c90f59 CQ:SW420430 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/60571 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Leverage INTRP fully for SBE PSU Interrupt HandlingBill Hoffa2018-06-282-2/+55
| | | | | | | | | | | | | | | | | | | | | - Remove PSU Handling from INTRP code and instead treat PSU interrupts like any other interrupt type - Add msg_handler to SBE PSU Code to handle interrupts - Add better interrupt handling to timeout path so the interrupt condition will be cleared instead of represented continuously - Handle shutdown message from INTRP Change-Id: I5eafea806e147c22be235ae1c54a5ce4706aa012 RTC: 149698 CQ: SW418168 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/60049 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Save HRMOR in mbox scratch reg for IPC messagingPrachi Gupta2018-06-261-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to know where the IPC message of a given node is, we save off the HRMOR of every node in a hw register. Originally, we were saving this information in the core scratch register. Since, the core scratch registers are wiped off when the cores go into the winkle state, therefore, we were writing to the register after we come out of winkle. But, at that point, we ran into race conditions because other nodes could be ahead and try to access the register on a node that is not exactly out of winkle yet. This fixes the problems by using the mbox scratch register rather than the core scratch register because they are saved off even when the cores go into winkle state. Because the registers are preseved, we can set the value prior to cores coming out of winkle, so, we don't run into the race condition where one node is trying to read a value prior to the other one writing the value. Change-Id: I822bfc8defe09cbb418edc5f36a99b7cd41eec88 CQ:SW435271 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/61093 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* SP ATTN area relative addressing cleanupJaymes Wilks2018-06-262-17/+19
| | | | | | | | | | | | | | | | | This change attemps to remove some technical debt incurred by the "HRMOR relative addressing for PHyp SP ATTN area dump" commit. Change-Id: I773c25e6f704fba561aa78106120325562698e4e RTC:186439 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/61099 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
OpenPOWER on IntegriCloud