6 files changed, 1 insertions, 358 deletions
diff --git a/src/build/citest/etc/bbuild b/src/build/citest/etc/bbuild
index 204bafd54..e64a1a0f6 100644
--- a/src/build/citest/etc/bbuild
+++ b/src/build/citest/etc/bbuild
@@ -1 +1 @@
-/esw/fips810/Builds/b1207x_1251.810
+/esw/fips801/Builds/b1216c_1251.801
diff --git a/src/build/citest/etc/patches/centaur.act.patch b/src/build/citest/etc/patches/centaur.act.patch
deleted file mode 100644
index 099132b85..000000000
--- a/src/build/citest/etc/patches/centaur.act.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- centaur.act.old	2012-11-29 13:26:32.062325973 -0500
-+++ centaur.act	2012-11-29 13:26:55.228400406 -0500
-@@ -187,7 +187,7 @@ CAUSE_EFFECT {
-   WATCH=[REG(0x0301060C)]  #MBMSR=0301060C
-   CAUSE: TARGET=[REG(0x0301060C)] OP=[BIT,OFF] BIT=[0]   # Maint Cmd Complete
-   CAUSE: TARGET=[REG(0x0301060F)] OP=[BIT,ON] BIT=[11]   # Enable Special attn
--  #EFFECT: TARGET=[REG(0x03010611)] OP=[BIT,ON] BIT=[0]   # Set Special attn bit
-+  EFFECT: TARGET=[REG(0x03010611)] OP=[BIT,ON] BIT=[0]   # Set Special attn bit
- }
-
- #Set command in progress
-@@ -223,7 +223,7 @@ CAUSE_EFFECT {
-   WATCH=[REG(0x03010E0C)]  #MBMSR=03010E0C
-   CAUSE: TARGET=[REG(0x03010E0C)] OP=[BIT,OFF] BIT=[0]   # Maint Cmd Complete
-   CAUSE: TARGET=[REG(0x03010E0F)] OP=[BIT,ON] BIT=[11]   # Enable Special attn
--  #EFFECT: TARGET=[REG(0x03010E11)] OP=[BIT,ON] BIT=[0]   # Set Special attn bit
-+  EFFECT: TARGET=[REG(0x03010E11)] OP=[BIT,ON] BIT=[0]   # Set Special attn bit
- }
-
- #***************************************
diff --git a/src/build/citest/etc/patches/centaur.act.slew.patch b/src/build/citest/etc/patches/centaur.act.slew.patch
deleted file mode 100644
index 089c52ecd..000000000
--- a/src/build/citest/etc/patches/centaur.act.slew.patch
+++ /dev/null
@@ -1,53 +0,0 @@
---- /esw/fips810/Builds/b1207x_1251.810/src/simu/data/cec-chip/centaur.act      2012-09-18 09:23:16.000000000 -0500
-+++ ./centaur.act       2012-12-13 20:00:14.319266193 -0600
-@@ -29,6 +29,7 @@
- #  ch139 F849719   ched      08/28/12  Apply Dean Sanner's fix for "OPCG SCAN0"
- #                                      action
- #        SW164340  bradleyb  09/18/12  temp back out mdia actions
-+#        SW178996  mjjones   12/13/12  Slew calibration actions
- #********************************************************************
- #  
- 
-@@ -89,6 +90,42 @@
- }
- 
- CAUSE_EFFECT {
-+  LABEL=[Slew calibration for MBA0 Port0]
-+  WATCH=[INDSCOM_0x0301143F(0x00008039)]  # SLEW_CAL_CNTL_P0
-+  CAUSE: TARGET=[INDSCOM_0x0301143F(0x00008039)] OP=[BIT,ON] BIT=[48] # Set Start bit
-+  EFFECT: TARGET=[INDSCOM_0x0301143F(0x00008034)] OP=[EQUALTO,BUF] DATA=[LITERAL(64,00000000 00000031)] # SLEW_DONE_STAT
-+    # 0x30 = Status Mask. 0x30 = Done with no errors
-+    # 0x0F = Calibrated Data Mask. Anything other than all 0s or all 1s is good
-+}
-+
-+CAUSE_EFFECT {
-+  LABEL=[Slew calibration for MBA0 Port1]
-+  WATCH=[INDSCOM_0x0301143F(0x00018039)]  # SLEW_CAL_CNTL_P1
-+  CAUSE: TARGET=[INDSCOM_0x0301143F(0x00018039)] OP=[BIT,ON] BIT=[48] # Set Start bit
-+  EFFECT: TARGET=[INDSCOM_0x0301143F(0x00018034)] OP=[EQUALTO,BUF] DATA=[LITERAL(64,00000000 00000031)] # SLEW_DONE_STAT
-+    # 0x30 = Status Mask. 0x30 = Done with no errors
-+    # 0x0F = Calibrated Data Mask. Anything other than all 0s or all 1s is good
-+}
-+
-+CAUSE_EFFECT {
-+  LABEL=[Slew calibration for MBA1 Port0]
-+  WATCH=[INDSCOM_0x0301183F(0x00008039)]  # SLEW_CAL_CNTL_P0
-+  CAUSE: TARGET=[INDSCOM_0x0301183F(0x00008039)] OP=[BIT,ON] BIT=[48] # Set Start bit
-+  EFFECT: TARGET=[INDSCOM_0x0301183F(0x00008034)] OP=[EQUALTO,BUF] DATA=[LITERAL(64,00000000 00000031)] # SLEW_DONE_STAT
-+    # 0x30 = Status Mask. 0x30 = Done with no errors
-+    # 0x0F = Calibrated Data Mask. Anything other than all 0s or all 1s is good
-+}
-+
-+CAUSE_EFFECT {
-+  LABEL=[Slew calibration for MBA0 Port1]
-+  WATCH=[INDSCOM_0x0301183F(0x00018039)]  # SLEW_CAL_CNTL_P1
-+  CAUSE: TARGET=[INDSCOM_0x0301183F(0x00018039)] OP=[BIT,ON] BIT=[48] # Set Start bit
-+  EFFECT: TARGET=[INDSCOM_0x0301183F(0x00018034)] OP=[EQUALTO,BUF] DATA=[LITERAL(64,00000000 00000031)] # SLEW_DONE_STAT
-+    # 0x30 = Status Mask. 0x30 = Done with no errors
-+    # 0x0F = Calibrated Data Mask. Anything other than all 0s or all 1s is good
-+}
-+
-+CAUSE_EFFECT {
-   # copy chip ID
-   LABEL=[DEVICE_ID_REG] # TPTOP.PIB.PCBMS.DEVICE_ID_REG
-   WATCH_READ=[REG(0x000F000F)]  # if someone reads this
diff --git a/src/build/citest/etc/patches/patchlist.txt b/src/build/citest/etc/patches/patchlist.txt
index 281c4743d..18371bf8f 100644
--- a/src/build/citest/etc/patches/patchlist.txt
+++ b/src/build/citest/etc/patches/patchlist.txt
@@ -5,29 +5,6 @@ Brief description of the problem or reason for patch
 -Files: list of files		
 -Coreq: list of associated changes, e.g. workarounds.presimsetup
 
-New actions for Centaur maint command complete
--RTC: Task 59218 will remove the patch
--CMVC: D862701 is integrating the changes
--Files: centaur.act.patch
--Coreq: there are related changes in workarounds.postsimsetup
-
-Bus training does not set all 5 training bits at once, therefore the
-Murano Action File must cope with any bit being set.
-Proc-Cen Framelock now looks for a different status bit in a different
-register, therefore the Murano Action File must cope
--RTC: Task 60658 will remove this patch
--CMVC: 864393
--Files: s1.act.io.patch
--Coreq: None
-
-Centaur Slew calibration sets a start bit in a register and looks
-for completion and calibration values in another register, therefore
-the Centaur Action File must cope
--RTC: Task 60658 will remove this patch
--CMVC: 864393
--Files: centaur.act.slew.patch
--Coreq: None
-
 Additional actions for Centaur maint command complete
 -RTC: Task 60668 will remove the patch
 -CMVC: D864673 is integrating the changes
diff --git a/src/build/citest/etc/patches/s1.act.io.patch b/src/build/citest/etc/patches/s1.act.io.patch
deleted file mode 100644
index 57b42e25c..000000000
--- a/src/build/citest/etc/patches/s1.act.io.patch
+++ /dev/null
@@ -1,223 +0,0 @@
---- /esw/fips810/Builds/b1207x_1251.810/src/simu/data/cec-chip/s1.act   2012-11-19 16:58:36.000000000 -0600
-+++ ./s1.act    2012-12-13 20:12:09.282244491 -0600
-@@ -15,6 +15,8 @@
- #        SW170609  sankarkk  10/13/12  Added ramming support
- #  to99  SW170119  opiet     10/23/12  Set Core 1 functional bit
- # dds129 SW175501  jlortiz   11/19/12  changes for SBEstart action
-+#        SW178996  mjjones   12/11/12  Breakout DMI run_training bits
-+#                                      Update framelock FRTL actions
- 
- # ch110 send instruction start signal to phyp model for core 5, thread 0
- CAUSE_EFFECT {
-@@ -95,7 +97,7 @@
-   WATCH=[REG(0x02011C4A)]  # MCI4_CFG_REG
-   CAUSE: TARGET=[REG(0x02011C4A)] OP=[BIT,ON] BIT=[8] # MCI4_CFG_REG[8] - Start Frame Lock Frtl
-   EFFECT: TARGET=[REG(0x02011C4B)] OP=[BIT,ON] BIT=[2] # MCI_STAT_REG  - Frame Lock Frtl Pass
--  EFFECT: TARGET=[ALIAS(mymcPort4)REG(0x0201080B)] OP=[BIT,ON] BIT=[2] # MBI_STAT_REG  - Frame Lock Frtl Pass
-+  EFFECT: TARGET=[REG(0x02011C4B)] OP=[BIT,ON] BIT=[12] # MCI_STAT_REG  - Frame Lock Channel Interlock Pass
- }
- 
- CAUSE_EFFECT {
-@@ -111,7 +113,7 @@
-   WATCH=[REG(0x02011CCA)]  # MCI5_CFG_REG
-   CAUSE: TARGET=[REG(0x02011CCA)] OP=[BIT,ON] BIT=[8] # MCI5_CFG_REG[8] - Start Frame Lock Frtl
-   EFFECT: TARGET=[REG(0x02011CCB)] OP=[BIT,ON] BIT=[2] # MCI_STAT_REG  - Frame Lock Frtl Pass
--  EFFECT: TARGET=[ALIAS(mymcPort5)REG(0x0201080B)] OP=[BIT,ON] BIT=[2] # MBI_STAT_REG  - Frame Lock Frtl Pass
-+  EFFECT: TARGET=[REG(0x02011CCB)] OP=[BIT,ON] BIT=[12] # MCI_STAT_REG  - Frame Lock Channel Interlock Pass
- }
- 
- CAUSE_EFFECT {
-@@ -127,7 +129,7 @@
-   WATCH=[REG(0x02011D4A)]  # MCI6_CFG_REG
-   CAUSE: TARGET=[REG(0x02011D4A)] OP=[BIT,ON] BIT=[8] # MCI6_CFG_REG[8] - Start Frame Lock Frtl
-   EFFECT: TARGET=[REG(0x02011D4B)] OP=[BIT,ON] BIT=[2] # MCI_STAT_REG  - Frame Lock Frtl Pass
--  EFFECT: TARGET=[ALIAS(mymcPort6)REG(0x0201080B)] OP=[BIT,ON] BIT=[2] # MBI_STAT_REG  - Frame Lock Frtl Pass
-+  EFFECT: TARGET=[REG(0x02011D4B)] OP=[BIT,ON] BIT=[12] # MCI_STAT_REG  - Frame Lock Channel Interlock Pass
- }
- 
- CAUSE_EFFECT {
-@@ -143,39 +145,167 @@
-   WATCH=[REG(0x02011DCA)]  # MCI7_CFG_REG
-   CAUSE: TARGET=[REG(0x02011DCA)] OP=[BIT,ON] BIT=[8] # MCI7_CFG_REG[8] - Start Frame Lock Frtl
-   EFFECT: TARGET=[REG(0x02011DCB)] OP=[BIT,ON] BIT=[2] # MCI_STAT_REG  - Frame Lock Frtl Pass
--  EFFECT: TARGET=[ALIAS(mymcPort7)REG(0x0201080B)] OP=[BIT,ON] BIT=[2] # MBI_STAT_REG  - Frame Lock Frtl Pass
-+  EFFECT: TARGET=[REG(0x02011DCB)] OP=[BIT,ON] BIT=[12] # MCI_STAT_REG  - Frame Lock Channel Interlock Pass
- }
- 
- CAUSE_EFFECT {
--  LABEL=[IO_run_training for MCS4]
-+  LABEL=[IO_run_training wiretest for MCS4]
-   WATCH=[INDSCOM_0x02011E3F(0x00088060)]  # start trigger register
--  CAUSE: TARGET=[ALIAS(mymcPort4)INDSCOM_0x0201043F(0x00088000)] OP=[EQUALTO,BUF,MASK] DATA=[LITERAL(64,00000000 0000F800)] MASK=[LITERAL(64,00000000 0000FFFF0]
--  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088060)] OP=[EQUALTO,BUF,MASK] DATA=[LITERAL(64,00000000 0000F800)] MASK=[LITERAL(64,00000000 0000FFFF)]
--  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088860)] OP=[EQUALTO,BUFSTRING] DATA=[LITERAL(64,00000000 0000F800)]
-+  CAUSE: TARGET=[ALIAS(mymcPort4)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[48]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088060)] OP=[BIT,ON] BIT=[48]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088860)] OP=[BIT,ON] BIT=[48]
- }
- 
- CAUSE_EFFECT {
--  LABEL=[IO_run_training for MCS5]
-+  LABEL=[IO_run_training deskew for MCS4]
-+  WATCH=[INDSCOM_0x02011E3F(0x00088060)]  # start trigger register
-+  CAUSE: TARGET=[ALIAS(mymcPort4)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[49]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088060)] OP=[BIT,ON] BIT=[49]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088860)] OP=[BIT,ON] BIT=[49]
-+}
-+
-+CAUSE_EFFECT {
-+  LABEL=[IO_run_training eye_opt for MCS4]
-+  WATCH=[INDSCOM_0x02011E3F(0x00088060)]  # start trigger register
-+  CAUSE: TARGET=[ALIAS(mymcPort4)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[50]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088060)] OP=[BIT,ON] BIT=[50]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088860)] OP=[BIT,ON] BIT=[50]
-+}
-+
-+CAUSE_EFFECT {
-+  LABEL=[IO_run_training repair for MCS4]
-+  WATCH=[INDSCOM_0x02011E3F(0x00088060)]  # start trigger register
-+  CAUSE: TARGET=[ALIAS(mymcPort4)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[51]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088060)] OP=[BIT,ON] BIT=[51]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088860)] OP=[BIT,ON] BIT=[51]
-+}
-+
-+CAUSE_EFFECT {
-+  LABEL=[IO_run_training func_mode for MCS4]
-+  WATCH=[INDSCOM_0x02011E3F(0x00088060)]  # start trigger register
-+  CAUSE: TARGET=[ALIAS(mymcPort4)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[52]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088060)] OP=[BIT,ON] BIT=[52]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088860)] OP=[BIT,ON] BIT=[52]
-+}
-+
-+CAUSE_EFFECT {
-+  LABEL=[IO_run_training wiretest for MCS5]
-+  WATCH=[INDSCOM_0x02011E3F(0x00088040)]  # start trigger register
-+  CAUSE: TARGET=[ALIAS(mymcPort5)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[48]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088040)] OP=[BIT,ON] BIT=[48]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088840)] OP=[BIT,ON] BIT=[48]
-+}
-+
-+CAUSE_EFFECT {
-+  LABEL=[IO_run_training deskew for MCS5]
-+  WATCH=[INDSCOM_0x02011E3F(0x00088040)]  # start trigger register
-+  CAUSE: TARGET=[ALIAS(mymcPort5)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[49]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088040)] OP=[BIT,ON] BIT=[49]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088840)] OP=[BIT,ON] BIT=[49]
-+}
-+
-+CAUSE_EFFECT {
-+  LABEL=[IO_run_training eye_opt for MCS5]
-+  WATCH=[INDSCOM_0x02011E3F(0x00088040)]  # start trigger register
-+  CAUSE: TARGET=[ALIAS(mymcPort5)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[50]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088040)] OP=[BIT,ON] BIT=[50]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088840)] OP=[BIT,ON] BIT=[50]
-+}
-+
-+CAUSE_EFFECT {
-+  LABEL=[IO_run_training repair for MCS5]
-+  WATCH=[INDSCOM_0x02011E3F(0x00088040)]  # start trigger register
-+  CAUSE: TARGET=[ALIAS(mymcPort5)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[51]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088040)] OP=[BIT,ON] BIT=[51]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088840)] OP=[BIT,ON] BIT=[51]
-+}
-+
-+CAUSE_EFFECT {
-+  LABEL=[IO_run_training func_mode for MCS5]
-   WATCH=[INDSCOM_0x02011E3F(0x00088040)]  # start trigger register
--  CAUSE: TARGET=[ALIAS(mymcPort5)INDSCOM_0x0201043F(0x00088000)] OP=[EQUALTO,BUF,MASK] DATA=[LITERAL(64,00000000 0000F800)] MASK=[LITERAL(64,00000000 0000FFFF0]
--  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088040)] OP=[EQUALTO,BUF,MASK] DATA=[LITERAL(64,00000000 0000F800)] MASK=[LITERAL(64,00000000 0000FFFF)]
--  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088840)] OP=[EQUALTO,BUFSTRING] DATA=[LITERAL(64,00000000 0000F800)]
-+  CAUSE: TARGET=[ALIAS(mymcPort5)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[52]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088040)] OP=[BIT,ON] BIT=[52]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088840)] OP=[BIT,ON] BIT=[52]
- }
- 
- CAUSE_EFFECT {
--  LABEL=[IO_run_training for MCS6]
-+  LABEL=[IO_run_training wiretest for MCS6]
-   WATCH=[INDSCOM_0x02011E3F(0x00088020)]  # start trigger register
--  CAUSE: TARGET=[ALIAS(mymcPort6)INDSCOM_0x0201043F(0x00088000)] OP=[EQUALTO,BUF,MASK] DATA=[LITERAL(64,00000000 0000F800)] MASK=[LITERAL(64,00000000 0000FFFF0]
--  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088020)] OP=[EQUALTO,BUF,MASK] DATA=[LITERAL(64,00000000 0000F800)] MASK=[LITERAL(64,00000000 0000FFFF)]
--  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088820)] OP=[EQUALTO,BUFSTRING] DATA=[LITERAL(64,00000000 0000F800)]
-+  CAUSE: TARGET=[ALIAS(mymcPort6)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[48]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088020)] OP=[BIT,ON] BIT=[48]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088820)] OP=[BIT,ON] BIT=[48]
-+}
-+
-+CAUSE_EFFECT {
-+  LABEL=[IO_run_training deskew for MCS6]
-+  WATCH=[INDSCOM_0x02011E3F(0x00088020)]  # start trigger register
-+  CAUSE: TARGET=[ALIAS(mymcPort6)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[49]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088020)] OP=[BIT,ON] BIT=[49]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088820)] OP=[BIT,ON] BIT=[49]
-+}
-+
-+CAUSE_EFFECT {
-+  LABEL=[IO_run_training eye_opt for MCS6]
-+  WATCH=[INDSCOM_0x02011E3F(0x00088020)]  # start trigger register
-+  CAUSE: TARGET=[ALIAS(mymcPort6)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[50]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088020)] OP=[BIT,ON] BIT=[50]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088820)] OP=[BIT,ON] BIT=[50]
-+}
-+
-+CAUSE_EFFECT {
-+  LABEL=[IO_run_training repair for MCS6]
-+  WATCH=[INDSCOM_0x02011E3F(0x00088020)]  # start trigger register
-+  CAUSE: TARGET=[ALIAS(mymcPort6)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[51]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088020)] OP=[BIT,ON] BIT=[51]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088820)] OP=[BIT,ON] BIT=[51]
-+}
-+
-+CAUSE_EFFECT {
-+  LABEL=[IO_run_training func_mode for MCS6]
-+  WATCH=[INDSCOM_0x02011E3F(0x00088020)]  # start trigger register
-+  CAUSE: TARGET=[ALIAS(mymcPort6)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[52]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088020)] OP=[BIT,ON] BIT=[52]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088820)] OP=[BIT,ON] BIT=[52]
-+}
-+
-+CAUSE_EFFECT {
-+  LABEL=[IO_run_training wiretest for MCS7]
-+  WATCH=[INDSCOM_0x02011E3F(0x00088000)]  # start trigger register
-+  CAUSE: TARGET=[ALIAS(mymcPort7)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[48]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088000)] OP=[BIT,ON] BIT=[48]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088800)] OP=[BIT,ON] BIT=[48]
-+}
-+
-+CAUSE_EFFECT {
-+  LABEL=[IO_run_training deskew for MCS7]
-+  WATCH=[INDSCOM_0x02011E3F(0x00088000)]  # start trigger register
-+  CAUSE: TARGET=[ALIAS(mymcPort7)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[49]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088000)] OP=[BIT,ON] BIT=[49]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088800)] OP=[BIT,ON] BIT=[49]
-+}
-+
-+CAUSE_EFFECT {
-+  LABEL=[IO_run_training eye_opt for MCS7]
-+  WATCH=[INDSCOM_0x02011E3F(0x00088000)]  # start trigger register
-+  CAUSE: TARGET=[ALIAS(mymcPort7)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[50]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088000)] OP=[BIT,ON] BIT=[50]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088800)] OP=[BIT,ON] BIT=[50]
-+}
-+
-+CAUSE_EFFECT {
-+  LABEL=[IO_run_training repair for MCS7]
-+  WATCH=[INDSCOM_0x02011E3F(0x00088000)]  # start trigger register
-+  CAUSE: TARGET=[ALIAS(mymcPort7)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[51]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088000)] OP=[BIT,ON] BIT=[51]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088800)] OP=[BIT,ON] BIT=[51]
- }
- 
- CAUSE_EFFECT {
--  LABEL=[IO_run_training for MCS7]
-+  LABEL=[IO_run_training func_mode for MCS7]
-   WATCH=[INDSCOM_0x02011E3F(0x00088000)]  # start trigger register
--  CAUSE: TARGET=[ALIAS(mymcPort7)INDSCOM_0x0201043F(0x00088000)] OP=[EQUALTO,BUF,MASK] DATA=[LITERAL(64,00000000 0000F800)] MASK=[LITERAL(64,00000000 0000FFFF0]
--  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088000)] OP=[EQUALTO,BUF,MASK] DATA=[LITERAL(64,00000000 0000F800)] MASK=[LITERAL(64,00000000 0000FFFF)]
--  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088800)] OP=[EQUALTO,BUFSTRING] DATA=[LITERAL(64,00000000 0000F800)]
-+  CAUSE: TARGET=[ALIAS(mymcPort7)INDSCOM_0x0201043F(0x00088000)] OP=[BIT,ON] BIT=[52]
-+  CAUSE: TARGET=[INDSCOM_0x02011E3F(0x00088000)] OP=[BIT,ON] BIT=[52]
-+  EFFECT: TARGET=[INDSCOM_0x02011E3F(0x00088800)] OP=[BIT,ON] BIT=[52]
- }
- 
- CAUSE_EFFECT {
diff --git a/src/build/citest/etc/workarounds.postsimsetup b/src/build/citest/etc/workarounds.postsimsetup
index bc26ee2e6..7ff9800d4 100755
--- a/src/build/citest/etc/workarounds.postsimsetup
+++ b/src/build/citest/etc/workarounds.postsimsetup
@@ -26,49 +26,11 @@
 ##    to setup the sandbox
 ##
 
-### Updates to handle maint command complete (Remove with RTC:59218)
-echo "+++ Update cec-chip files for Centaur maint command complete."
-mkdir -p $sb/simu/data/cec-chip/
-cp $bb/src/simu/data/cec-chip/centaur.act $sb/simu/data/cec-chip/centaur.act
-patch -p0 $sb/simu/data/cec-chip/centaur.act $HOSTBOOTROOT/src/build/citest/etc/patches/centaur.act.patch
-
-### Update centaur.act to handle slew calibration (Remove with 60568)
-echo "+++ Updating Centaur Action File to support slew calibration"
-patch -p0 $sb/simu/data/cec-chip/centaur.act $HOSTBOOTROOT/src/build/citest/etc/patches/centaur.act.slew.patch
-
-#### Update config file with new variables (Remove with RTC: 59984) ####
-#### Update config file with new GFW_P8_MURANO_CENTAUR_MODEL_EC separate RTC:60617) ###
-#### Update config file with new GFW_P8_VENICE_CENTAUR_MODEL_EC separate RTC:60617) ###
-
-echo "+++ Forcing SBE header usage till Fips defaults to ON"
-echo "+++ Forcing GFW_P8_MURANO_CENTAUR_MODEL_EC to 790 from 730 there currently"
-mkdir -p $sb/simu/configs
-mkdir -p $sb/simu/data/cec-chip
-egrep -v "SETENV GFW_P8_MURANO_HB_BASE_IMG_USE_PNOR|SETENV GFW_P8_MURANO_HB_BASE_IMG_WITH_ECC|GFW_P8_MURANO_CENTAUR_MODEL_EC" $BACKING_BUILD/src/simu/configs/P8_MURANO.config> $sb/simu/configs/P8_MURANO.config
-egrep -v "SETENV GFW_P8_VENICE_HB_BASE_IMG_USE_PNOR|SETENV GFW_P8_VENICE_HB_BASE_IMG_WITH_ECC|GFW_P8_VENICE_CENTAUR_MODEL_EC" $BACKING_BUILD/src/simu/configs/P8_VENICE.config> $sb/simu/configs/P8_VENICE.config
-echo "SETENV GFW_P8_MURANO_HB_BASE_IMG_USE_PNOR yes" >> $sb/simu/configs/P8_MURANO.config
-echo "SETENV GFW_P8_VENICE_HB_BASE_IMG_USE_PNOR yes" >> $sb/simu/configs/P8_VENICE.config
-echo "SETENV GFW_P8_MURANO_HB_BASE_IMG_WITH_ECC yes" >> $sb/simu/configs/P8_MURANO.config
-echo "SETENV GFW_P8_VENICE_HB_BASE_IMG_WITH_ECC yes" >> $sb/simu/configs/P8_VENICE.config
-echo "SETENV GFW_P8_VENICE_CENTAUR_MODEL_EC  910790" >> $sb/simu/configs/P8_VENICE.config
-echo "SETENV GFW_P8_MURANO_CENTAUR_MODEL_EC  910790" >> $sb/simu/configs/P8_MURANO.config
 
 echo "+++ Updating s1.act and p8_common.chip"
 mkdir -p $sb/simu/data/cec-chip
 cp $BACKING_BUILD/src/simu/data/cec-chip/s1.act $sb/simu/data/cec-chip
 cp $BACKING_BUILD/src/simu/data/cec-chip/p8.act $sb/simu/data/cec-chip
-sed -i -e's/sbeStart, 0x03eca000,/sbeStart, FSIMBOX(0x3A),/' $sb/simu/data/cec-chip/s1.act
-sed -i -e's/sbeStart, 0x03eca000,/sbeStart, FSIMBOX(0x3A),/' $sb/simu/data/cec-chip/p8.act
-
-### Update s1.act to handle bus training and framelock (Remove with 60568)
-echo "+++ Updating Murano Action File to support bus training and framelock"
-patch -p0 $sb/simu/data/cec-chip/s1.act $HOSTBOOTROOT/src/build/citest/etc/patches/s1.act.io.patch
-
-cp $BACKING_BUILD/src/simu/data/cec-chip/p8_common.chip $sb/simu/data/cec-chip
-sed -i -e's/0xE0, 32  #MBOX_SCRATCH_0/0x38, 32  #MBOX_SCRATCH_0/' $sb/simu/data/cec-chip/p8_common.chip
-sed -i -e's/0xE4, 32  #MBOX_SCRATCH_1/0x39, 32  #MBOX_SCRATCH_1/' $sb/simu/data/cec-chip/p8_common.chip
-sed -i -e's/0xE8, 32  #MBOX_SCRATCH_2/0x3A, 32  #MBOX_SCRATCH_2/' $sb/simu/data/cec-chip/p8_common.chip
-sed -i -e's/0xEC, 32  #MBOX_SCRATCH_3/0x3B, 32  #MBOX_SCRATCH_3/' $sb/simu/data/cec-chip/p8_common.chip
 
 #### Update actions files for proc_a_x_pci_dmi_pll_setup -
 ####      Remove when F864674 under RTC 60617