blackbird-hostboot/src/usr/targeting/common/xmltohb, branch 07-25-2019

Add support for NVDIMM secure erase verify

2020-01-17T19:45:37+00:00

Add nvdimm operations to interface Add wrapper for factory default function Add secure erase verify start function Add secure erase verify status function Change-Id: I84774e679593e7df1907c1a442c831b2f4df88d9 CQ:SW475562 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/84301 Reviewed-by: Matt Derksen Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Tested-by: FSP CI Jenkins Reviewed-by: Roland Veloz Reviewed-by: Daniel M Crowell

Correct target hiearchy in axone system xml

2020-01-10T18:17:10+00:00

Previously the comment at the top of this xml file stated that a MCC has 4 OMIs when in reality it only has 2. Change-Id: I442beceefcec5ad3601d7b2ec96f89ab52096b46 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/89268 Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: FSP CI Jenkins Tested-by: Jenkins OP HW Reviewed-by: Matt Derksen Reviewed-by: Ilya Smirnov Reviewed-by: Daniel M Crowell

Add SBE Arch dump area for both OPAL & PHYP

2020-01-08T15:40:37+00:00

Currently Hostboot only sets up the architected dump capture on the SBE for OPAL based systems. This commit adds the setup to PHYP based systems as well. Change-Id: I96271a57f7c15c571495ed56ea72dbeeebab8d94 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/88095 Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Tested-by: FSP CI Jenkins Reviewed-by: MURULIDHAR NATARAJU Reviewed-by: Daniel M Crowell

For ATTR_MSS_OCMB_HALF_DIMM_MODE to full dimm mode

2019-12-05T19:14:55+00:00

pSeries always runs in full-dimm mode. Change-Id: I8515c7d600993330abfd94da4fd810e07f11e230 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/87998 Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Tested-by: FSP CI Jenkins Reviewed-by: Daniel M Crowell

Move KEY_CLEAR_REQUEST attribute from node level to system level

2019-11-16T14:22:30+00:00

Change-Id: I2de1bcbfb7a8d8adfa47a6e62bdbad3ab2514a55 RTC:210301 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/87081 Reviewed-by: Christopher J Engel Reviewed-by: Ilya Smirnov Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Tested-by: FSP CI Jenkins Reviewed-by: Nicholas E Bofferding

Add Physical Presence Check and Window Open Features

2019-11-14T14:28:02+00:00

This commit does the following: - Adds an interface to detect if physical presence has been asserted -- This happens in istep 6 -- If the window is open to detect this, it is then closed here - Adds an interface to possibly open the window to look for physical presence -- This happens in istep 10 -- It first checks to see if the window should be opened -- If the window is opened then the system shuts down to wait for physical presence to be asserted on the next power on - Adds the necessary attributes to support and test this functionality RTC:211220 Change-Id: I05a26ebad581875a4b9f2a51eb1ca3062f36c5fb Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/84656 Reviewed-by: Ilya Smirnov Reviewed-by: Christopher J Engel Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Tested-by: FSP CI Jenkins Reviewed-by: Nicholas E Bofferding

Support GPIO Physical Presence Detect Devices

2019-11-14T14:27:53+00:00

This commit makes the necessary changes to support the GPIO devices used for physical presence detection: - New attribute GPIO_INFO_PHYS_PRES - Enable GPIO Device Driver by default - GPIO Device Driver updated to support new device type - Added new GPIO PCA9551 layer to sit on top of GPIO Device Driver Change-Id: I952007503eb5d9fe873adea2eaaeccff21ae18a6 RTC:211220 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/84655 Reviewed-by: Ilya Smirnov Reviewed-by: Christopher J Engel Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Tested-by: FSP CI Jenkins Reviewed-by: Nicholas E Bofferding

Add new Key Clear Request Attribute

2019-11-05T15:32:58+00:00

This commit adds a new Key Clear Request Attribute and Enumeration to be shared by the FSP and Hostboot code for future Key Clear support. Change-Id: I74bb9c12ed1d3fdcf8f55c77c76d4001b15e3b0f RTC:210301 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/86409 Reviewed-by: Christopher J Engel Reviewed-by: Ilya Smirnov Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Reviewed-by: Nicholas E Bofferding Tested-by: Jenkins OP HW Tested-by: FSP CI Jenkins Reviewed-by: Daniel M Crowell

Allow dynmic i2c device addresses and set up PMIC targets to do this

2019-11-01T20:41:41+00:00

Depending on which vendor made a given OCMB the i2c device address of the PMIC targets on the OCMB will be different. To account for this we have added a new DYNAMIC_DEVICE_ADDRESS attribute. This attribute is filled out on the PMIC target by looking at the SPD on parent OCMB chip. This means that we must do presence detection on the OCMB prior to the the PMIC targets. While doing i2c operations if a given target has the DYNAMIC_DEVICE_ADDRESS we will use that over the devAddr in the any complex i2c attribute for that target. Change-Id: I22a185a65c064a1514751dd5828547c57af98df1 RTC: 209714 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/85394 Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Tested-by: FSP CI Jenkins Reviewed-by: Daniel M Crowell Reviewed-by: Roland Veloz Reviewed-by: William G Hoffa

Set endianess attributes in hb_customized_attrs instead of in code

2019-10-22T13:23:54+00:00

When we first detected we needed to have these attributes differerent than what the EKB had we set them in the call_mss_eff_config istep code. Really these should be set in the hb_customized_attrs xml. Change-Id: I7166a25c53330bf90e423b0e4de718b95344bfb7 RTC: 202491 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/85443 Reviewed-by: Daniel M Crowell Tested-by: Daniel M Crowell