summaryrefslogtreecommitdiffstats
path: root/llvm/tools/opt/opt.cpp
Commit message (Collapse)AuthorAgeFilesLines
* Update the file headers across all of the LLVM projects in the monorepoChandler Carruth2019-01-191-4/+3
| | | | | | | | | | | | | | | | | to reflect the new license. We understand that people may be surprised that we're moving the header entirely to discuss the new license. We checked this carefully with the Foundation's lawyer and we believe this is the correct approach. Essentially, all code in the project is now made available by the LLVM project under our new license, so you will see that the license headers include that license only. Some of our contributors have contributed code under our old license, and accordingly, we have retained a copy of our old license notice in the top-level files in each project and repository. llvm-svn: 351636
* [PGO] Make pgo related options in opt more consistent.Wei Mi2019-01-161-0/+28
| | | | | | | | | | | | | | | Currently we have pgo options defined in PassManagerBuilder.cpp only for instrument pgo, but not for sample pgo. We also have pgo options defined in NewPMDriver.cpp in opt only for new pass manager and for all kinds of pgo. They have some inconsistency. To make the options more consistent and make tests writing easier, the patch let old pass manager to share the same pgo options with new pass manager in opt, and removes the options in PassManagerBuilder.cpp. Differential Revision: https://reviews.llvm.org/D56749 llvm-svn: 351392
* [LTO] Record whether LTOUnit splitting is enabled in indexTeresa Johnson2019-01-111-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Summary: Records in the module summary index whether the bitcode was compiled with the option necessary to enable splitting the LTO unit (e.g. -fsanitize=cfi, -fwhole-program-vtables, or -fsplit-lto-unit). The information is passed down to the ModuleSummaryIndex builder via a new module flag "EnableSplitLTOUnit", which is propagated onto a flag on the summary index. This is then used during the LTO link to check whether all linked summaries were built with the same value of this flag. If not, an error is issued when we detect a situation requiring whole program visibility of the class hierarchy. This is the case when both of the following conditions are met: 1) We are performing LowerTypeTests or Whole Program Devirtualization. 2) There are type tests or type checked loads in the code. Note I have also changed the ThinLTOBitcodeWriter to also gate the module splitting on the value of this flag. Reviewers: pcc Subscribers: ormris, mehdi_amini, Prazek, inglorion, eraman, steven_wu, dexonsmith, arphaman, dang, llvm-commits Differential Revision: https://reviews.llvm.org/D53890 llvm-svn: 350948
* Subject: [PATCH] [CodeGen] Add pass to combine interleaved loads.Martin Elshuber2018-11-191-0/+1
| | | | | | | | | | | | | | This patch defines an interleaved-load-combine pass. The pass searches for ShuffleVector instructions that represent interleaved loads. Matches are converted such that they will be captured by the InterleavedAccessPass. The pass extends LLVMs capabilities to use target specific instruction selection of interleaved load patterns (e.g.: ld4 on Aarch64 architectures). Differential Revision: https://reviews.llvm.org/D52653 llvm-svn: 347208
* [Debugify] Export per-pass debug info loss statisticsVedant Kumar2018-07-241-2/+21
| | | | | | | | | | | | Add a -debugify-export option to opt. This exports per-pass `debugify` loss statistics to a file in CSV format. For some interesting numbers on debug value loss during an -O2 build of the sqlite3 amalgamation, see the review thread. Differential Revision: https://reviews.llvm.org/D49003 llvm-svn: 337787
* [Debugify] Move interface definitions to a header, NFCVedant Kumar2018-07-241-0/+1
| | | | | | | | This is a minor cleanup in preparation for a change to export DI statistics from -check-debugify. To do that, it would be cleaner to have a dedicated header for the debugify interface. llvm-svn: 337786
* [opt] Introduce -strip-named-metadataVedant Kumar2018-06-051-8/+12
| | | | | | | This renames and generalizes -strip-module-flags to erase all named metadata from a module. This makes it easier to diff IR. llvm-svn: 333977
* [Debugify] Don't apply DI before the bitcode writer passVedant Kumar2018-06-041-2/+2
| | | | | | | | | | | | Applying synthetic debug info before the bitcode writer pass has no testing-related purpose. This commit prevents that from happening. It also adds tests which check that IR produced with/without -debugify-each enabled is identical after stripping. This makes it possible to check that individual passes (or full pipelines) are invariant to debug info. llvm-svn: 333861
* [opt] Add a -strip-module-flags optionVedant Kumar2018-06-041-0/+8
| | | | | | | | | | | | | | | The -strip-module-flags option strips llvm.module.flags metadata from a module at the beginning of the opt pipeline. This will be used to test whether the output of a pass is debug info (DI) invariant. E.g, after applying synthetic debug info to a test case, we'd like to strip out all DI-related metadata and check that the final IR is identical to a baseline file without any DI applied, to check that optimizations aren't inhibited by debug info. llvm-svn: 333860
* [WebAssembly] Add Wasm exception handling prepare passHeejin Ahn2018-05-311-0/+1
| | | | | | | | | | | | | | | | Summary: This adds a pass that transforms a program to be prepared for Wasm exception handling. This is using Windows EH instructions and based on the previous Wasm EH proposal. (https://github.com/WebAssembly/exception-handling/blob/master/proposals/Exceptions.md) Reviewers: dschuff, majnemer Subscribers: jfb, mgorny, sbc100, jgravelle-google, JDevlieghere, sunfish, llvm-commits Differential Revision: https://reviews.llvm.org/D43746 llvm-svn: 333696
* [Debugfiy] Print the pass name next to the resultAnastasis Grammenos2018-05-151-2/+2
| | | | | | | | CheckDebugify now prints the pass name right next to the result of the check. Differential Revision: https://reviews.llvm.org/D46908 llvm-svn: 332416
* [Debugify] Add -debugify-each for testing each pass in a pipelineVedant Kumar2018-05-151-6/+42
| | | | | | | | | | | | | | | | This adds a -debugify-each mode to opt which, when enabled, wraps each {Module,Function}Pass in a pipeline with logic to add, check, and strip synthetic debug info for testing purposes. This mode can be used to test complex pipelines for debug info bugs, or to collect statistics about the number of debug values & locations lost throughout various stages of a pipeline. Patch by Son Tuan Vu! Differential Revision: https://reviews.llvm.org/D46525 llvm-svn: 332312
* IWYU for llvm-config.h in llvm, additions.Nico Weber2018-04-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | See r331124 for how I made a list of files missing the include. I then ran this Python script: for f in open('filelist.txt'): f = f.strip() fl = open(f).readlines() found = False for i in xrange(len(fl)): p = '#include "llvm/' if not fl[i].startswith(p): continue if fl[i][len(p):] > 'Config': fl.insert(i, '#include "llvm/Config/llvm-config.h"\n') found = True break if not found: print 'not found', f else: open(f, 'w').write(''.join(fl)) and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p` and tried to fix include ordering and whatnot. No intended behavior change. llvm-svn: 331184
* [AggressiveInstCombine] Add library initializer routine for ↵Craig Topper2018-04-241-1/+1
| | | | | | | | AggressiveInstCombine library. Use it in bugpoint and llvm-opt-fuzzer to match regular InstCombine. This should make aggressive instcombine usable with these tools. llvm-svn: 330663
* [DebugInfo][OPT] NFC follow-up on "Fixing a couple of DI duplication bugs of ↵Roman Tereshin2018-04-131-9/+9
| | | | | | CloneModule" llvm-svn: 330070
* [DebugInfo][OPT] Fixing a couple of DI duplication bugs of CloneModuleRoman Tereshin2018-04-131-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As demonstrated by the regression tests added in this patch, the following cases are valid cases: 1. A Function with no DISubprogram attached, but various debug info related to its instructions, coming, for instance, from an inlined function, also defined somewhere else in the same module; 2. ... or coming exclusively from the functions inlined and eliminated from the module entirely. The ValueMap shared between CloneFunctionInto calls within CloneModule needs to contain identity mappings for all of the DISubprogram's to prevent them from being duplicated by MapMetadata / RemapInstruction calls, this is achieved via DebugInfoFinder collecting all the DISubprogram's. However, CloneFunctionInto was missing calls into DebugInfoFinder for functions w/o DISubprogram's attached, but still referring DISubprogram's from within (case 1). This patch fixes that. The fix above, however, exposes another issue: if a module contains a DISubprogram referenced only indirectly from other debug info metadata, but not attached to any Function defined within the module (case 2), cloning such a module causes a DICompileUnit duplication: it will be moved in indirecty via a DISubprogram by DebugInfoFinder first (because of the first bug fix described above), without being self-mapped within the shared ValueMap, and then will be copied during named metadata cloning. So this patch makes sure DebugInfoFinder visits DICompileUnit's referenced from DISubprogram's as it goes w/o re-processing llvm.dbg.cu list over and over again for every function cloned, and makes sure that CloneFunctionInto self-maps DICompileUnit's referenced from the entire function, not just its own DISubprogram attached that may also be missing. The most convenient way of tesing CloneModule I found is to rely on CloneModule call from `opt -run-twice`, instead of writing tedious unit tests. That feature has a couple of properties that makes it hard to use for this purpose though: 1. CloneModule doesn't copy source filename, making `opt -run-twice` report it as a difference. 2. `opt -run-twice` does the second run on the original module, not its clone, making the result of cloning completely invisible in opt's actual output with and without `-run-twice` both, which directly contradicts `opt -run-twice`s own error message. This patch fixes this as well. Reviewed By: aprantl Reviewers: loladiro, GorNishanov, espindola, echristo, dexonsmith Subscribers: vsk, debug-info, JDevlieghere, llvm-commits Differential Revision: https://reviews.llvm.org/D45593 llvm-svn: 330069
* Define InitLLVM to do common initialization all at once.Rui Ueyama2018-04-131-6/+2
| | | | | | | | | | | We have a few functions that virtually all command wants to run on process startup/shutdown. This patch adds InitLLVM class to do that all at once, so that we don't need to copy-n-paste boilerplate code to each llvm command's main() function. Differential Revision: https://reviews.llvm.org/D45602 llvm-svn: 330046
* Rename *CommandFlags.def to *CommandFlags.incDavid Blaikie2018-04-111-1/+1
| | | | | | | | These aren't the .def style files used in LLVM that require a macro defined before their inclusion - they're just basic non-modular includes to stamp out command line flag variables. llvm-svn: 329840
* [opt] Port the debugify passes to the new pass managerVedant Kumar2018-02-151-4/+1
| | | | llvm-svn: 325294
* Pass a module reference to CloneModule.Rafael Espindola2018-02-141-4/+4
| | | | | | | It can never be null and most callers were already using references or std::unique_ptr. llvm-svn: 325160
* LLParser: add an argument for overriding data layout and do not check alloca ↵Yaxun Liu2018-01-301-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | addr space Sometimes users do not specify data layout in LLVM assembly and let llc set the data layout by target triple after loading the LLVM assembly. Currently the parser checks alloca address space no matter whether the LLVM assembly contains data layout definition, which causes false alarm since the default data layout does not contain the correct alloca address space. The parser also calls verifier to check debug info and updating invalid debug info. Currently there is no way to let the verifier to check debug info only. If the verifier finds non-debug-info issues the parser will fail. For llc, the fix is to remove the check of alloca addr space in the parser and disable updating debug info, and defer the updating of debug info and verification to be after setting data layout of the IR by target. For other llvm tools, since they do not override data layout by target but instead can override data layout by a command line option, an argument for overriding data layout is added to the parser. In cases where data layout overriding is necessary for the parser, the data layout can be provided by command line. Differential Revision: https://reviews.llvm.org/D41832 llvm-svn: 323826
* Another try to commit 323321 (aggressive instruction combine).Amjad Aboud2018-01-251-0/+1
| | | | llvm-svn: 323416
* Reverted 323321.Amjad Aboud2018-01-241-1/+0
| | | | llvm-svn: 323326
* [InstCombine] Introducing Aggressive Instruction Combine pass ↵Amjad Aboud2018-01-241-0/+1
| | | | | | | | | | | | | | | | | | (-aggressive-instcombine). Combine expression patterns to form expressions with fewer, simple instructions. This pass does not modify the CFG. For example, this pass reduce width of expressions post-dominated by TruncInst into smaller width when applicable. It differs from instcombine pass in that it contains pattern optimization that requires higher complexity than the O(1), thus, it should run fewer times than instcombine pass. Differential Revision: https://reviews.llvm.org/D38313 llvm-svn: 323321
* [Debugify] Add a mode to opt to enable faster testingVedant Kumar2018-01-231-0/+14
| | | | | | | | | | | | | | | | | | Opt's "-enable-debugify" mode adds an instance of Debugify at the beginning of the pass pipeline, and an instance of CheckDebugify at the end. You can enable this mode with lit using: -Dopt="opt -enable-debugify". Note that running test suites in this mode will result in many failures due to strict FileCheck commands, etc. It can be more useful to look for assertion failures which arise only when Debugify is enabled, e.g to prove that we have (or do not have) test coverage for some code path with debug info present. Differential Revision: https://reviews.llvm.org/D41793 llvm-svn: 323256
* Introduce the "retpoline" x86 mitigation technique for variant #2 of the ↵Chandler Carruth2018-01-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | speculative execution vulnerabilities disclosed today, specifically identified by CVE-2017-5715, "Branch Target Injection", and is one of the two halves to Spectre.. Summary: First, we need to explain the core of the vulnerability. Note that this is a very incomplete description, please see the Project Zero blog post for details: https://googleprojectzero.blogspot.com/2018/01/reading-privileged-memory-with-side.html The basis for branch target injection is to direct speculative execution of the processor to some "gadget" of executable code by poisoning the prediction of indirect branches with the address of that gadget. The gadget in turn contains an operation that provides a side channel for reading data. Most commonly, this will look like a load of secret data followed by a branch on the loaded value and then a load of some predictable cache line. The attacker then uses timing of the processors cache to determine which direction the branch took *in the speculative execution*, and in turn what one bit of the loaded value was. Due to the nature of these timing side channels and the branch predictor on Intel processors, this allows an attacker to leak data only accessible to a privileged domain (like the kernel) back into an unprivileged domain. The goal is simple: avoid generating code which contains an indirect branch that could have its prediction poisoned by an attacker. In many cases, the compiler can simply use directed conditional branches and a small search tree. LLVM already has support for lowering switches in this way and the first step of this patch is to disable jump-table lowering of switches and introduce a pass to rewrite explicit indirectbr sequences into a switch over integers. However, there is no fully general alternative to indirect calls. We introduce a new construct we call a "retpoline" to implement indirect calls in a non-speculatable way. It can be thought of loosely as a trampoline for indirect calls which uses the RET instruction on x86. Further, we arrange for a specific call->ret sequence which ensures the processor predicts the return to go to a controlled, known location. The retpoline then "smashes" the return address pushed onto the stack by the call with the desired target of the original indirect call. The result is a predicted return to the next instruction after a call (which can be used to trap speculative execution within an infinite loop) and an actual indirect branch to an arbitrary address. On 64-bit x86 ABIs, this is especially easily done in the compiler by using a guaranteed scratch register to pass the target into this device. For 32-bit ABIs there isn't a guaranteed scratch register and so several different retpoline variants are introduced to use a scratch register if one is available in the calling convention and to otherwise use direct stack push/pop sequences to pass the target address. This "retpoline" mitigation is fully described in the following blog post: https://support.google.com/faqs/answer/7625886 We also support a target feature that disables emission of the retpoline thunk by the compiler to allow for custom thunks if users want them. These are particularly useful in environments like kernels that routinely do hot-patching on boot and want to hot-patch their thunk to different code sequences. They can write this custom thunk and use `-mretpoline-external-thunk` *in addition* to `-mretpoline`. In this case, on x86-64 thu thunk names must be: ``` __llvm_external_retpoline_r11 ``` or on 32-bit: ``` __llvm_external_retpoline_eax __llvm_external_retpoline_ecx __llvm_external_retpoline_edx __llvm_external_retpoline_push ``` And the target of the retpoline is passed in the named register, or in the case of the `push` suffix on the top of the stack via a `pushl` instruction. There is one other important source of indirect branches in x86 ELF binaries: the PLT. These patches also include support for LLD to generate PLT entries that perform a retpoline-style indirection. The only other indirect branches remaining that we are aware of are from precompiled runtimes (such as crt0.o and similar). The ones we have found are not really attackable, and so we have not focused on them here, but eventually these runtimes should also be replicated for retpoline-ed configurations for completeness. For kernels or other freestanding or fully static executables, the compiler switch `-mretpoline` is sufficient to fully mitigate this particular attack. For dynamic executables, you must compile *all* libraries with `-mretpoline` and additionally link the dynamic executable and all shared libraries with LLD and pass `-z retpolineplt` (or use similar functionality from some other linker). We strongly recommend also using `-z now` as non-lazy binding allows the retpoline-mitigated PLT to be substantially smaller. When manually apply similar transformations to `-mretpoline` to the Linux kernel we observed very small performance hits to applications running typical workloads, and relatively minor hits (approximately 2%) even for extremely syscall-heavy applications. This is largely due to the small number of indirect branches that occur in performance sensitive paths of the kernel. When using these patches on statically linked applications, especially C++ applications, you should expect to see a much more dramatic performance hit. For microbenchmarks that are switch, indirect-, or virtual-call heavy we have seen overheads ranging from 10% to 50%. However, real-world workloads exhibit substantially lower performance impact. Notably, techniques such as PGO and ThinLTO dramatically reduce the impact of hot indirect calls (by speculatively promoting them to direct calls) and allow optimized search trees to be used to lower switches. If you need to deploy these techniques in C++ applications, we *strongly* recommend that you ensure all hot call targets are statically linked (avoiding PLT indirection) and use both PGO and ThinLTO. Well tuned servers using all of these techniques saw 5% - 10% overhead from the use of retpoline. We will add detailed documentation covering these components in subsequent patches, but wanted to make the core functionality available as soon as possible. Happy for more code review, but we'd really like to get these patches landed and backported ASAP for obvious reasons. We're planning to backport this to both 6.0 and 5.0 release streams and get a 5.0 release with just this cherry picked ASAP for distros and vendors. This patch is the work of a number of people over the past month: Eric, Reid, Rui, and myself. I'm mailing it out as a single commit due to the time sensitive nature of landing this and the need to backport it. Huge thanks to everyone who helped out here, and everyone at Intel who helped out in discussions about how to craft this. Also, credit goes to Paul Turner (at Google, but not an LLVM contributor) for much of the underlying retpoline design. Reviewers: echristo, rnk, ruiu, craig.topper, DavidKreitzer Subscribers: sanjoy, emaste, mcrosier, mgorny, mehdi_amini, hiraditya, llvm-commits Differential Revision: https://reviews.llvm.org/D41723 llvm-svn: 323155
* Rename CommandFlags.h -> CommandFlags.defDavid Blaikie2017-11-271-1/+1
| | | | | | | | | Since this isn't a real header - it includes static functions and had external linkage variables (though this change makes them static, since that's what they should be) so can't be included more than once in a program. llvm-svn: 319082
* Rename CountingFunctionInserter and use for both mcount and cygprofile ↵Hans Wennborg2017-11-141-1/+2
| | | | | | | | | | | | | | | | | | | | | | calls, before and after inlining Clang implements the -finstrument-functions flag inherited from GCC, which inserts calls to __cyg_profile_func_{enter,exit} on function entry and exit. This is useful for getting a trace of how the functions in a program are executed. Normally, the calls remain even if a function is inlined into another function, but it is useful to be able to turn this off for users who are interested in a lower-level trace, i.e. one that reflects what functions are called post-inlining. (We use this to generate link order files for Chromium.) LLVM already has a pass for inserting similar instrumentation calls to mcount(), which it does after inlining. This patch renames and extends that pass to handle calls both to mcount and the cygprofile functions, before and/or after inlining as controlled by function attributes. Differential Revision: https://reviews.llvm.org/D39287 llvm-svn: 318195
* re-land [ExpandMemCmp] Split ExpandMemCmp from CodeGen into its own pass."Clement Courbet2017-11-031-0/+1
| | | | | | Fix undefined references: ExpandMemCmp belongs to CodeGen/, not Scalar/. llvm-svn: 317318
* [opt] Initialize WriteBitcode pass.Michael Kruse2017-10-241-0/+1
| | | | | | | | | | | | | | | Probably due to a change of how some pass initializes its dependencies, the -write-bitcode pass (Bitcode/Writer/BitcodeWriterPass.cpp) is not initialized in opt anymore and therefore not usable with opt -write-bitcode Explicitly call initializeWriteBitcodePassPass() to make it available in opt again. Differential Revision: https://reviews.llvm.org/D39223 llvm-svn: 316464
* Revert "TargetMachine: Merge TargetMachine and LLVMTargetMachine"Matthias Braun2017-10-121-3/+4
| | | | | | | | | | Reverting to investigate layering effects of MCJIT not linking libCodeGen but using TargetMachine::getNameWithPrefix() breaking the lldb bots. This reverts commit r315633. llvm-svn: 315637
* TargetMachine: Merge TargetMachine and LLVMTargetMachineMatthias Braun2017-10-121-4/+3
| | | | | | | | | | | | | | | Merge LLVMTargetMachine into TargetMachine. - There is no in-tree target anymore that just implements TargetMachine but not LLVMTargetMachine. - It should still be possible to stub out all the various functions in case a target does not want to use lib/CodeGen - This simplifies the code and avoids methods ending up in the wrong interface. Differential Revision: https://reviews.llvm.org/D38489 llvm-svn: 315633
* Move the stripping of invalid debug info from the Verifier to AutoUpgrade.Adrian Prantl2017-10-021-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | This came out of a recent discussion on llvm-dev (https://reviews.llvm.org/D38042). Currently the Verifier will strip the debug info metadata from a module if it finds the dbeug info to be malformed. This feature is very valuable since it allows us to improve the Verifier by making it stricter without breaking bcompatibility, but arguable the Verifier pass should not be modifying the IR. This patch moves the stripping of broken debug info into AutoUpgrade (UpgradeDebugInfo to be precise), which is a much better location for this since the stripping of malformed (i.e., produced by older, buggy versions of Clang) is a (harsh) form of AutoUpgrade. This change is mostly NFC in nature, the one big difference is the behavior when LLVM module passes are introducing malformed debug info. Prior to this patch, a NoAsserts build would have printed a warning and stripped the debug info, after this patch the Verifier will report a fatal error. I believe this behavior is actually more desirable anyway. Differential Revision: https://reviews.llvm.org/D38184 llvm-svn: 314699
* [Support] Rename tool_output_file to ToolOutputFile, NFCReid Kleckner2017-09-231-9/+9
| | | | | | | This class isn't similar to anything from the STL, so it shouldn't use the STL naming conventions. llvm-svn: 314050
* Keep Optimization Remark Yaml in NewPMSam Elliott2017-08-201-9/+10
| | | | | | | | | | | | | | | | | | | Summary: The New Pass Manager infrastructure was forgetting to keep around the optimization remark yaml file that the compiler might have been producing. This meant setting the option to '-' for stdout worked, but setting it to a filename didn't give file output (presumably it was deleted because compilation didn't explicitly keep it). This change just ensures that the file is kept if compilation succeeds. So far I have updated one of the optimization remark output tests to add a version with the new pass manager. It is my intention for this patch to also include changes to all tests that use `-opt-remark-output=` but I wanted to get the code patch ready for review while I was making all those changes. Fixes https://bugs.llvm.org/show_bug.cgi?id=33951 Reviewers: anemet, chandlerc Reviewed By: anemet, chandlerc Subscribers: javed.absar, chandlerc, fhahn, llvm-commits Differential Revision: https://reviews.llvm.org/D36906 llvm-svn: 311271
* Delete Default and JITDefault code modelsRafael Espindola2017-08-031-1/+1
| | | | | | | | | | | | | | | IMHO it is an antipattern to have a enum value that is Default. At any given piece of code it is not clear if we have to handle Default or if has already been mapped to a concrete value. In this case in particular, only the target can do the mapping and it is nice to make sure it is always done. This deletes the two default enum values of CodeModel and uses an explicit Optional<CodeModel> when it is possible that it is unspecified. llvm-svn: 309911
* [ORE] Add diagnostics hotness thresholdBrian Gesiak2017-06-301-0/+8
| | | | | | | | | | | | | | | | | | | | Summary: Add an option to prevent diagnostics that do not meet a minimum hotness threshold from being output. When generating optimization remarks for large codebases with a ton of cold code paths, this option can be used to limit the optimization remark output at a reasonable size. Discussion of this change can be read here: http://lists.llvm.org/pipermail/llvm-dev/2017-June/114377.html Reviewers: anemet, davidxl, hfinkel Reviewed By: anemet Subscribers: qcolombet, javed.absar, fhahn, eraman, llvm-commits Differential Revision: https://reviews.llvm.org/D34867 llvm-svn: 306912
* [ORE] Unify spelling as "diagnostics hotness"Brian Gesiak2017-06-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Summary: To enable profile hotness information in diagnostics output, Clang takes the option `-fdiagnostics-show-hotness` -- that's "diagnostics", with an "s" at the end. Clang also defines `CodeGenOptions::DiagnosticsWithHotness`. LLVM, on the other hand, defines `LLVMContext::getDiagnosticHotnessRequested` -- that's "diagnostic", not "diagnostics". It's a small difference, but it's confusing, typo-inducing, and frustrating. Add a new method with the spelling "diagnostics", and "deprecate" the old spelling. Reviewers: anemet, davidxl Reviewed By: anemet Subscribers: llvm-commits, mehdi_amini Differential Revision: https://reviews.llvm.org/D34864 llvm-svn: 306848
* [ThinLTO] Migrate ThinLTOBitcodeWriter to the new PM.Tim Shen2017-06-011-2/+4
| | | | | | | | | | | | Summary: Also see D33429 for other ThinLTO + New PM related changes. Reviewers: davide, chandlerc, tejohnson Subscribers: mehdi_amini, Prazek, cfe-commits, inglorion, llvm-commits, eraman Differential Revision: https://reviews.llvm.org/D33525 llvm-svn: 304378
* [LegacyPassManager] Remove TargetMachine constructorsFrancis Visoiu Mistrih2017-05-181-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This provides a new way to access the TargetMachine through TargetPassConfig, as a dependency. The patterns replaced here are: * Passes handling a null TargetMachine call `getAnalysisIfAvailable<TargetPassConfig>`. * Passes not handling a null TargetMachine `addRequired<TargetPassConfig>` and call `getAnalysis<TargetPassConfig>`. * MachineFunctionPasses now use MF.getTarget(). * Remove all the TargetMachine constructors. * Remove INITIALIZE_TM_PASS. This fixes a crash when running `llc -start-before prologepilog`. PEI needs StackProtector, which gets constructed without a TargetMachine by the pass manager. The StackProtector pass doesn't handle the case where there is no TargetMachine, so it segfaults. Related to PR30324. Differential Revision: https://reviews.llvm.org/D33222 llvm-svn: 303360
* [X86] Relocate code of replacement of subtarget unsupported masked memory ↵Ayman Musa2017-05-151-0/+1
| | | | | | | | | | | | | | intrinsics to run also on -O0 option. Currently, when masked load, store, gather or scatter intrinsics are used, we check in CodeGenPrepare pass if the subtarget support these intrinsics, if not we replace them with scalar code - this is a functional transformation not an optimization (not optional). CodeGenPrepare pass does not run when the optimization level is set to CodeGenOpt::None (-O0). Functional transformation should run with all optimization levels, so here I created a new pass which runs on all optimization levels and does no more than this transformation. Differential Revision: https://reviews.llvm.org/D32487 llvm-svn: 303050
* Add a late IR expansion pass for the experimental reduction intrinsics.Amara Emerson2017-05-101-0/+1
| | | | | | | | | This pass uses a new target hook to decide whether or not to expand a particular intrinsic to the shuffevector sequence. Differential Revision: https://reviews.llvm.org/D32245 llvm-svn: 302631
* [CodeGen] Split SafeStack into a LegacyPass and a utility. NFC.Ahmed Bougacha2017-05-101-1/+1
| | | | | | | | | This lets the pass focus on gathering the required analyzes, and the utility class focus on the transformation. Differential Revision: https://reviews.llvm.org/D31303 llvm-svn: 302609
* [ThinLTO] Add support for emitting minimized bitcode for thin linkTeresa Johnson2017-03-231-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Summary: The cumulative size of the bitcode files for a very large application can be huge, particularly with -g. In a distributed build environment, all of these files must be sent to the remote build node that performs the thin link step, and this can exceed size limits. The thin link actually only needs the summary along with a bitcode symbol table. Until we have a proper bitcode symbol table, simply stripping the debug metadata results in significant size reduction. Add support for an option to additionally emit minimized bitcode modules, just for use in the thin link step, which for now just strips all debug metadata. I plan to add a cc1 option so this can be invoked easily during the compile step. However, care must be taken to ensure that these minimized thin link bitcode files produce the same index as with the original bitcode files, as these original bitcode files will be used in the backends. Specifically: 1) The module hash used for caching is typically produced by hashing the written bitcode, and we want to include the hash that would correspond to the original bitcode file. This is because we want to ensure that changes in the stripped portions affect caching. Added plumbing to emit the same module hash in the minimized thin link bitcode file. 2) The module paths in the index are constructed from the module ID of each thin linked bitcode, and typically is automatically generated from the input file path. This is the path used for finding the modules to import from, and obviously we need this to point to the original bitcode files. Added gold-plugin support to take a suffix replacement during the thin link that is used to override the identifier on the MemoryBufferRef constructed from the loaded thin link bitcode file. The assumption is that the build system can specify that the minimized bitcode file has a name that is similar but uses a different suffix (e.g. out.thinlink.bc instead of out.o). Added various tests to ensure that we get identical index files out of the thin link step. Reviewers: mehdi_amini, pcc Subscribers: Prazek, llvm-commits Differential Revision: https://reviews.llvm.org/D31027 llvm-svn: 298638
* Do not inline hot callsites for samplepgo in thinlto compile phase.Dehao Chen2017-03-211-1/+1
| | | | | | | | | | | | | | Summary: Because SamplePGO passes will be invoked twice in ThinLTO build: once at compile phase, the other at backend. We want to make sure the IR at the 2nd phase matches the hot part in profile, thus we do not want to inline hot callsites in the first phase. Reviewers: tejohnson, eraman Reviewed By: tejohnson Subscribers: mehdi_amini, llvm-commits, Prazek Differential Revision: https://reviews.llvm.org/D31201 llvm-svn: 298428
* opt: Rename -default-data-layout flag to -data-layout and make it always ↵Peter Collingbourne2017-02-171-11/+7
| | | | | | | | | | override the layout. There isn't much point in a flag that only works if the data layout is empty. Differential Revision: https://reviews.llvm.org/D30014 llvm-svn: 295468
* Replace addEarlyAsPossiblePasses callback with adjustPassManagerStanislav Mekhanoshin2017-01-261-6/+1
| | | | | | | | | | | | | | This change introduces adjustPassManager target callback giving a target an opportunity to tweak PassManagerBuilder before pass managers are populated. This generalizes and replaces addEarlyAsPossiblePasses target callback. In particular that can be used to add custom passes to extension points other than EP_EarlyAsPossible. Differential Revision: https://reviews.llvm.org/D28336 llvm-svn: 293189
* IPO: Introduce ThinLTOBitcodeWriter pass.Peter Collingbourne2016-12-161-1/+7
| | | | | | | | | | | | | | This pass prepares a module containing type metadata for ThinLTO by splitting it into regular and thin LTO parts if possible, and writing both parts to a multi-module bitcode file. Modules that do not contain type metadata are written unmodified as a single module. All globals with type metadata are added to the regular LTO module, and the rest are added to the thin LTO module. Differential Revision: https://reviews.llvm.org/D27324 llvm-svn: 289899
* Change setDiagnosticsOutputFile to take a unique_ptr from a raw pointer (NFC)Mehdi Amini2016-11-191-1/+2
| | | | | | | | | | | | | | Summary: This makes it explicit that ownership is taken. Also replace all `new` with make_unique<> at call sites. Reviewers: anemet Subscribers: llvm-commits Differential Revision: https://reviews.llvm.org/D26884 llvm-svn: 287449
* Restore "[ThinLTO] Prevent exporting of locals used/defined in module level asm"Teresa Johnson2016-11-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This restores the rest of r286297 (part was restored in r286475). Specifically, it restores the part requiring adding a dependency from the Analysis to Object library (downstream use changed to correctly model split BitReader vs BitWriter libraries). Original description of this part of patch follows: Module level asm may also contain defs of values. We need to prevent export of any refs to local values defined in module level asm (e.g. a ref in normal IR), since that also requires renaming/promotion of the local. To do that, the summary index builder looks at all values in the module level asm string that are not marked Weak or Global, which is exactly the set of locals that are defined. A summary is created for each of these local defs and flagged as NoRename. This required adding handling to the BitcodeWriter to look at GV declarations to see if they have a summary (rather than skipping them all). Finally, added an assert to IRObjectFile::CollectAsmUndefinedRefs to ensure that an MCAsmParser is available, otherwise the module asm parse would silently fail. Initialized the asm parser in the opt tool for use in testing this fix. Fixes PR30610. llvm-svn: 286844
OpenPOWER on IntegriCloud