| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The reference implementation uses a case-insensitive string
comparison for strings of equal length. This will cause the
string "tEo" to compare less than "VUo". However we were using
a case sensitive comparison, which would generate the opposite
outcome. Switch to a case insensitive comparison. Also, when
one of the strings contains non-ascii characters, fallback to
a straight memcmp.
The only way to really test this is with a DIA test. Before this
patch, the test will fail (but succeed if link.exe is used instead
of lld-link). After the patch, it succeeds even with lld-link.
llvm-svn: 336464
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We add an option to dump the entire global / public symbol record
stream. Previously we would dump globals or publics, but not both.
And when we did dump them, we would always dump them in the order
they were referenced by the corresponding hash streams, not in
the order they were serialized in. This patch adds a lower level
mode that just dumps the whole stream in serialization order.
Additionally, when dumping global-extras, we now dump the hash
bitmap as well as the record offset instead of dumping all zeros
for the offsets.
llvm-svn: 336407
|
| |
|
|
|
|
|
|
|
|
|
| |
We have a few functions that virtually all command wants to run on
process startup/shutdown. This patch adds InitLLVM class to do that
all at once, so that we don't need to copy-n-paste boilerplate code
to each llvm command's main() function.
Differential Revision: https://reviews.llvm.org/D45602
llvm-svn: 330046
|
| |
|
|
|
|
|
|
|
|
| |
Using this, you can use llvm-pdbutil to export the contents of a
stream to a binary file, then run explain on the binary file so
that it treats the offset as an offset into the stream instead
of an offset into a file. This makes it easy to compare the
contents of the same stream from two different files.
llvm-svn: 329207
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This command can dump the binary contents of a stream to a file.
This is useful when you want to do side-by-side comparisons of
a specific stream from two PDBs to examine the differences between
them. You can export both of them to a file, then open them up
side by side in a hex editor (for example), so as to eliminate any
differences that might arise from the contents being on different
blocks in the PDB.
In subsequent patches I plan to improve the "explain" subcommand
so that you can explain the contents of a binary file that isn't
necessarily a full PDB, but one of these dumped streams, by telling
the subcommand how to interpret the contents.
llvm-svn: 329002
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: JDevlieghere, zturner, echristo, dberris, friss
Reviewed By: echristo
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D45141
llvm-svn: 328943
|
| |
|
|
|
|
|
|
|
| |
This will show more detail when using `llvm-pdbutil explain` on an
offset in the DBI or PDB streams. Specifically, it will dig into
individual header fields and substreams to give a more precise
description of what the byte represents.
llvm-svn: 328878
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When investigating various things, we often have a file offset
and what to know what's in the PDB at that address. For example
we may be doing a binary comparison of two LLD-generated PDBs
to look for sources of non-determinism, or we may wish to compare
an LLD-generated PDB with a Microsoft generated PDB for sources
of byte-for-byte incompatibility. In these cases, we can do a
binary diff of the two files, and once we find a mismatched byte
we can use explain to figure out what that byte is, immediately
honining in on the problem.
This patch implements this by trying to narrow the meaning of
a particular file offset down as much as possible.
Differential Revision: https://reviews.llvm.org/D44959
llvm-svn: 328799
|
| |
|
|
|
|
|
|
| |
This has been made obsolete by the fact that almost all of the
things it previously checked for are no longer relevant since
we can just compare bytes in a lot of places.
llvm-svn: 328562
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When investigating bugs in PDB generation, the first step is
often to do the same link with link.exe and then compare PDBs.
But comparing PDBs is hard because two completely different byte
sequences can both be correct, so it hampers the investigation when
you also have to spend time figuring out not just which bytes are
different, but also if the difference is meaningful.
This patch fixes a couple of cases related to string table emission,
hash table emission, and the order in which we emit strings that
makes more of our bytes the same as the bytes generated by MS PDBs.
Differential Revision: https://reviews.llvm.org/D44810
llvm-svn: 328348
|
| |
|
|
|
|
|
|
| |
This is still failing on a different bot this time due to some
issue related to hashing absolute paths. Reverting until I can
figure it out.
llvm-svn: 328014
|
| |
|
|
|
|
|
|
|
|
|
| |
The issue causing this to fail in certain configurations
should be fixed.
It was due to the fact that DIA apparently expects there to be
a null string at ID 1 in the string table. I'm not sure why this
is important but it seems to make a difference, so set it.
llvm-svn: 328002
|
| |
|
|
|
|
|
| |
This is causing a test failure on a certain bot, so I'm removing
this temporarily until we can figure out the source of the error.
llvm-svn: 327903
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Natvis is a debug language supported by Visual Studio for
specifying custom visualizers. The /NATVIS option is an
undocumented link.exe flag which will take a .natvis file
and "inject" it into the PDB. This way, you can ship the
debug visualizers for a program along with the PDB, which
is very useful for postmortem debugging.
This is implemented by adding a new "named stream" to the
PDB with a special name of /src/files/<natvis file name>
and simply copying the contents of the xml into this file.
Additionally, we need to emit a single stream named
/src/headerblock which contains a hash table of embedded
files to records describing them.
This patch adds this functionality, including the /NATVIS
option to lld-link.
Differential Revision: https://reviews.llvm.org/D44328
llvm-svn: 327895
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Injected sources are basically a way to add actual source file content
to your PDB. Presumably you could use this for shipping your source code
with your debug information, but in practice I can only find this being
used for embedding natvis files inside of PDBs.
In order to effectively test LLVM's natvis file injection, we need a way
to dump the injected sources of a PDB in a way that is authoritative
(i.e. based on Microsoft's understanding of the PDB format, and not
LLVM's). To this end, I've added support for dumping injected sources
via DIA. I made a PDB file that used the /natvis option to generate a
test case.
Differential Revision: https://reviews.llvm.org/D44405
llvm-svn: 327428
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Summary: This avoids crashing when a user tries to dump a pdb with the `-native` option.
Reviewers: zturner, llvm-commits, rnk
Reviewed By: zturner
Subscribers: mgrang
Differential Revision: https://reviews.llvm.org/D44117
llvm-svn: 326863
|
| |
|
|
| |
llvm-svn: 320631
|
| |
|
|
| |
llvm-svn: 319456
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
A couple of places in LLD were passing references to
TypeTableCollections around, which makes it hard to change the
implementation at runtime. However, these cases only needed to
iterate over the types in the collection, and TypeCollection
already provides a handy abstract interface for this purpose.
By implementing this interface, we can get rid of the need to
pass TypeTableBuilder references around, which should allow us
to swap the implementation at runtime in subsequent patches.
llvm-svn: 319345
|
| |
|
|
| |
llvm-svn: 319340
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The motivation behind this patch is that future directions require us to
be able to compute the hash value of records independently of actually
using them for de-duplication.
The current structure of TypeSerializer / TypeTableBuilder being a
single entry point that takes an unserialized type record, and then
hashes and de-duplicates it is not flexible enough to allow this.
At the same time, the existing TypeSerializer is already extremely
complex for this very reason -- it tries to be too many things. In
addition to serializing, hashing, and de-duplicating, ti also supports
splitting up field list records and adding continuations. All of this
functionality crammed into this one class makes it very complicated to
work with and hard to maintain.
To solve all of these problems, I've re-written everything from scratch
and split the functionality into separate pieces that can easily be
reused. The end result is that one class TypeSerializer is turned into 3
new classes SimpleTypeSerializer, ContinuationRecordBuilder, and
TypeTableBuilder, each of which in isolation is simple and
straightforward.
A quick summary of these new classes and their responsibilities are:
- SimpleTypeSerializer : Turns a non-FieldList leaf type into a series of
bytes. Does not do any hashing. Every time you call it, it will
re-serialize and return bytes again. The same instance can be re-used
over and over to avoid re-allocations, and in exchange for this
optimization the bytes returned by the serializer only live until the
caller attempts to serialize a new record.
- ContinuationRecordBuilder : Turns a FieldList-like record into a series
of fragments. Does not do any hashing. Like SimpleTypeSerializer,
returns references to privately owned bytes, so the storage is
invalidated as soon as the caller tries to re-use the instance. Works
equally well for LF_FIELDLIST as it does for LF_METHODLIST, solving a
long-standing theoretical limitation of the previous implementation.
- TypeTableBuilder : Accepts sequences of bytes that the user has already
serialized, and inserts them by de-duplicating with a hash table. For
the sake of convenience and efficiency, this class internally stores a
SimpleTypeSerializer so that it can accept unserialized records. The
same is not true of ContinuationRecordBuilder. The user is required to
create their own instance of ContinuationRecordBuilder.
Differential Revision: https://reviews.llvm.org/D40518
llvm-svn: 319198
|
| |
|
|
|
|
| |
of it in some cases where it is a more clear alternative to std::for_each.
llvm-svn: 317356
|
| |
|
|
|
|
|
|
|
|
| |
It is possible for two modules to have the same name if they are
archive members with the same name, or if we are doing LTO (in which
case all modules will have the name "lto.tmp").
Differential Revision: https://reviews.llvm.org/D37589
llvm-svn: 312744
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We have llvm-readobj for dumping CodeView from object files, and
llvm-pdbutil has always been more focused on PDB. However,
llvm-pdbutil has a lot of useful options for summarizing debug
information in aggregate and presenting high level statistical
views. Furthermore, it's arguably better as a testing tool since
we don't have to write tests to conform to a state-machine like
structure where you match multiple lines in succession, each
depending on a previous match. llvm-pdbutil dumps much more
concisely, so it's possible to use single-line matches in many
cases where as with readobj tests you have to use multi-line
matches with an implicit state machine.
Because of this, I'm adding object file support to llvm-pdbutil.
In fact, this mirrors the cvdump tool from Microsoft, which also
supports both object files and pdb files. In the future we could
perhaps rename this tool llvm-cvutil.
In the meantime, this allows us to deep dive into object files
the same way we already can with PDB files.
llvm-svn: 312358
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adds a new command line option, -udt-stats, which breaks
down the stats of S_UDT records. These are one of the biggest
contributors to the size of /DEBUG:FASTLINK PDBs, so they need
some additional tools to be able to analyze their usage. This
option will dig into each S_UDT record and determine what kind
of record it points to, and then break down the statistics by
the target type. The goal here is to identify how our object
files differ from MSVC object files in S_UDT records, so that
we can output fewer of them and reach size parity.
llvm-svn: 312276
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adds support for dumping a summary of module symbols
and CodeView debug chunks. This option prints a table for
each module of all of the symbols that occurred in the module
and the number of times it occurred and total byte size. Then
at the end it prints the totals for the entire file.
Additionally, this patch adds the -jmc (just my code) option,
which suppresses modules which are from external libraries or
linker imports, so that you can focus only on the object files
and libraries that originate from your own source code.
llvm-svn: 311338
|
| |
|
|
|
|
|
|
|
|
| |
Image section headers are stored in the DBI stream, but we
had no way to dump them. This patch adds dumping support,
along with some tests that LLD actually dumps them correctly.
Differential Revision: https://reviews.llvm.org/D36332
llvm-svn: 310107
|
| |
|
|
|
|
|
|
|
| |
Often something interesting (like a symbol) is in a particular
module, and you don't want to dump symbols from all other 300
modules to see the one you want. This adds a -modi option so that
we only dump the specified module.
llvm-svn: 310000
|
| |
|
|
|
|
|
|
|
|
|
| |
Sometimes the normal module equivalence detection algorithm doesn't
quite work. For example, you might build the same program with
MSVC and clang-cl, outputting to different object files, exes, and
PDBs, then compare them. If the object files have different names
though, then they won't be treated as equivalent. This way we
can force specific module indices to be treated as equivalent.
llvm-svn: 309983
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Recently problems have been discovered in the way we write the FPM
(free page map). In order to fix this, we first need to establish
a baseline about what a correct FPM looks like using an MSVC
generated PDB, so that we can then make our own generated PDBs
match. And in order to do this, the dumper needs a mode where it
can dump an FPM so that we can write tests for it.
This patch adds a command to dump the FPM, as well as a test against
a known-good PDB.
llvm-svn: 309894
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The PDB "symbol stream" actually contains symbol records for the publics
and the globals stream. The globals and publics streams are essentially
hash tables that point into a single stream of records. In order to
match cvdump's behavior, we need to only dump symbol records referenced
from the hash table. This patch implements that, and then implements
global stream dumping, since it's just a subset of public stream
dumping.
Now we shouldn't see S_PROCREF or S_GDATA32 records when dumping
publics, and instead we should see those record in the globals stream.
llvm-svn: 309066
|
| |
|
|
|
|
|
|
|
|
| |
This includes the hash table, the address map, and the thunk table and
section offset table. The last two are only used for incremental
linking, which LLD doesn't support, so they are less interesting. The
hash table is particularly important to get right, since this is the one
of the streams that debuggers use to translate addresses to symbols.
llvm-svn: 308764
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Summary:
Instead of wiring these through the CVTypeVisitor interface, clients
should inspect the CVTypeArray before visiting it and potentially load
up the type server's TPI stream if they need it.
No tests relied on this functionality because LLD was the only client.
Reviewers: ruiu
Subscribers: mgorny, hiraditya, zturner, llvm-commits
Differential Revision: https://reviews.llvm.org/D35394
llvm-svn: 308212
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This was originally reverted because of two issues.
1) Printing ANSI color escape codes even when outputting to
a file
2) Module name comparisons were failing when comparing a PDB
generated on one machine to a PDB generated on another
machine.
I attempted to fix #2 by adding command line options which let
you specify prefixes to strip from the beginning of embedded
paths, which effectively lets us specify a path to "base" each
PDB from and only compare the parts under the base. But this is
tricky because PDB paths always use Windows path syntax, even
when they are created on non-Windows hosts. A problem still
existed when constructing the prefix to strip, where we were
accidentally using a host-specific path separator instead of
a Windows path separator.
This resubmission fixes the issue on Linux (and I have verified
that the test now passes on Linux).
llvm-svn: 307571
|
| |
|
|
|
|
|
|
| |
This reverts commit 180af3fdbdb17ec35b45ec1f925fd743b28d37e1.
This is still breaking due to linux-specific path differences.
llvm-svn: 307559
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A test was checked in on Friday that worked by checking in an
object file and PDB generated locally by MSVC, and then having
the test run lld-link on the object file and diffing LLD's PDB
against the checked in PDB.
This failed because part of the diffing algorithm involves
determining if two modules are the same, and if so drilling into
the module and diffing individual fields of the module. The
only thing we can use to make this determination though is the
"name" of the module, which is a path to where the module (obj
file) was read from on the machine where it was linked. This
fails for obvious reasons when comparing a PDB generated on one
machine to a PDB on another machine.
The fix employed here is to add two command line options to the
diff subcommand, which allow the user to specify a "binary root
path". The bin root path, if specified, is stripped from the
beginning of any embedded PDB paths. The test is updated to
specify the user's local test output directory for the left
PDB, and is hardcoded to the location where the original PDB
was created for the right PDB. This way all the equivalence
comparisons should succeed.
llvm-svn: 307555
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A couple of things were different about our generated PDBs.
1) We were outputting the wrong Version on the PDB Stream.
The version we were setting was newer than what MSVC is setting.
It's not clear what the implications are, but we change LLD
to use PdbImplVC70, as MSVC does.
2) For the optional debug stream indices in the DBI Stream, we
were outputting 0 to mean "the stream is not present". MSVC
outputs uint16_t(-1), which is the "correct" way to specify
that a stream is not present. So we fix that as well.
3) We were setting the PDB Stream signature to 0. This is supposed
to be the result of calling time(nullptr). Although this leads
to non-deterministic builds, a better way to solve that is by
having a command line option explicitly for generating a
reproducible build, and have the default behavior of lld-link
match the default behavior of link.
To test this, I'm making use of the new and improved `pdb diff`
sub command. To make it suitable for writing tests against, I had
to modify the diff subcommand slightly to print less verbose output.
Previously it would always print | <column> | <value1> | <value2> |
which is quite verbose, and the values are fragile. All we really
want to know is "did we produce the same value as link?" So I added
command line options to print a single character representing the
result status (different, identical, equivalent), and another to
hide the value display. Note that just inspecting the diff output
used to write the test, you can see some things that are obviously
wrong. That is just reflective of the fact that this is the state
of affairs today, not that we're asserting that this is "correct".
We can use this as a starting point to discover differences, fix
them, and update the test.
Differential Revision: https://reviews.llvm.org/D35086
llvm-svn: 307422
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
We had a lot of one-off tests for this type and that type,
or "every type that happens to be generated by this program
I built". Eventually I got a bug report filed where we were
crashing on a type that was not covered by any of these tests.
So this test carefully constructs a minimal C++ program that
will cause every type we support to be emitted. This ensures
full coverage for type records.
Differential Revision: https://reviews.llvm.org/D34915
llvm-svn: 307187
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously we had the -type-index option which would dump the record of
a single, but we had no way to follow the dependency graph backwards and
also dump all dependent types.
Having this option makes test-writing better, because we can limit the
test to only those records that are of importance for the thing we're
trying to test, which allows us to use things like CHECK-NEXT to reduce
fragility.
Differential Revision: https://reviews.llvm.org/D34899
llvm-svn: 306852
|
| |
|
|
| |
llvm-svn: 306309
|
| |
|
|
| |
llvm-svn: 306179
|
| |
|
|
| |
llvm-svn: 306167
|
| |
|
|
| |
llvm-svn: 306160
|
| |
|
|
|
|
|
|
| |
This is useful when you want to look at a specific chunk of a
stream or look for discontinuities, and you need to know the
list of blocks occupied by a stream.
llvm-svn: 306150
|
| |
|
|
|
|
|
|
| |
This patch dumps the raw bytes of the pdb name map which contains
the mapping of stream name to stream index for the string table
and other reserved streams.
llvm-svn: 306148
|
| |
|
|
|
|
|
|
|
|
| |
Normally we can only make sense of the content of a PDB in terms
of streams and blocks, but in some cases it may be useful to dump
bytes at a specific absolute file offset. For example, if you
know that some interesting data is at a particular location and
you want to see some surrounding data.
llvm-svn: 306146
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This idea originally came about when I was doing some deep
investigation of why certain bytes in a PDB that we round-tripped
differed from their original bytes in the source PDB. I found
myself having to hack up the code in many places to dump the
bytes of this substream, or that record. It would be nice if
we could just do this for every possible stream, substream,
debug chunk type, etc.
It doesn't make sense to put this under dump because there's just
so many options that would detract from the more common use case
of just dumping deserialized records. So making a new subcommand
seems like the most logical course of action. In doing so, we
already have two command line options that are suitable for this
new subcommand, so start out by moving them there.
llvm-svn: 306056
|
| |
|
|
|
|
|
|
|
| |
Now you run llvm-pdbutil dump <options>. This is a followup
after having renamed the tool, whereas before raw was obviously
just the style of dumping, whereas now "dump" is the action to
perform with the "util".
llvm-svn: 306055
|
| |
|
|
| |
llvm-svn: 305818
|
| |
|
|
|
|
|
| |
I'm trying to get rid of the TypeDatabase class, so the first
step is to minimize its footprint.
llvm-svn: 305611
|
