From 893498a5ebd32a024759ba019a79a61f41bd5c9b Mon Sep 17 00:00:00 2001
From: Matt Spinler <spinler@us.ibm.com>
Date: Wed, 8 Aug 2018 13:31:31 -0500
Subject: Remove the GPIOs from Witherspoon.py

They are now obtained from a JSON file.

Change-Id: I8ca4ac94e2907fadc9a444e42b20df576bd1e95b
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
---
 configs/Witherspoon.py | 69 --------------------------------------------------
 1 file changed, 69 deletions(-)

diff --git a/configs/Witherspoon.py b/configs/Witherspoon.py
index b0002f1..0887586 100644
--- a/configs/Witherspoon.py
+++ b/configs/Witherspoon.py
@@ -296,75 +296,6 @@ ID_LOOKUP = {
     'GPIO_PRESENT' : {}
 }
 
-GPIO_CONFIG = {}
-GPIO_CONFIG['BMC_POWER_UP'] = \
-        {'gpio_pin': 'D1', 'direction': 'out'}
-GPIO_CONFIG['SOFTWARE_PGOOD'] = \
-        {'gpio_pin': 'R1', 'direction': 'out'}
-GPIO_CONFIG['SYS_PWROK_BUFF'] = \
-        {'gpio_pin': 'D2', 'direction': 'in'}
-
-# PV_CP_MD_JTAG_ATTENTION_N
-GPIO_CONFIG['CHECKSTOP'] = \
-        {'gpio_pin': 'J2', 'direction': 'falling'}
-
-GPIO_CONFIG['BMC_CP0_RESET_N'] = \
-        {'gpio_pin': 'A1', 'direction': 'out'}
-# pcie switch reset
-GPIO_CONFIG['BMC_VS1_PERST_N'] = \
-        {'gpio_pin': 'B7', 'direction': 'out'}
-# pcie slots reset - not connected?
-GPIO_CONFIG['BMC_CP0_PERST_ENABLE_R'] = \
-        {'gpio_pin': 'A3', 'direction': 'out'}
-
-# SOFT_FSI_DAT
-GPIO_CONFIG['FSI_DATA'] = \
-        {'gpio_pin': 'E0', 'direction': 'out'}
-# SOFT_FSI_CLK
-GPIO_CONFIG['FSI_CLK'] = \
-        {'gpio_pin': 'AA0', 'direction': 'out'}
-# BMC_FSI_IN_ENA
-GPIO_CONFIG['FSI_ENABLE'] = \
-        {'gpio_pin': 'D0', 'direction': 'out'}
-# FSI_JMFG0_PRSNT_N
-GPIO_CONFIG['CRONUS_SEL'] = \
-        {'gpio_pin': 'A6', 'direction': 'out'}
-
-# FP_PWR_BTN_N
-GPIO_CONFIG['POWER_BUTTON'] = \
-        {'gpio_pin': 'I3', 'direction': 'both'}
-# BMC_NMIBTN_IN_N
-GPIO_CONFIG['RESET_BUTTON'] = \
-        {'gpio_pin': 'J1', 'direction': 'both'}
-
-# FIXME: needed for Witherspoon?
-# Tracked by openbmc/openbmc#814
-# FP_ID_BTN_N
-GPIO_CONFIG['IDBTN'] = \
-    {'gpio_pin': 'Q7', 'direction': 'out'}
-
-# TODO openbmc/openbmc#2288 - Determine if any pci resets needed
-GPIO_CONFIGS = {
-    'power_config' : {
-        'power_good_in' : 'SYS_PWROK_BUFF',
-        'power_up_outs' : [
-            ('SOFTWARE_PGOOD', True),
-            ('BMC_POWER_UP', True),
-        ],
-        'reset_outs' : [
-            ('BMC_CP0_RESET_N', False),
-        ],
-    },
-    'hostctl_config' : {
-        'fsi_data' : 'FSI_DATA',
-        'fsi_clk' : 'FSI_CLK',
-        'fsi_enable' : 'FSI_ENABLE',
-        'cronus_sel' : 'CRONUS_SEL',
-        'optionals' : [
-        ],
-    },
-}
-
 
 # Miscellaneous non-poll sensor with system specific properties.
 # The sensor id is the same as those defined in ID_LOOKUP['SENSOR'].
-- 
cgit v1.2.1